Answer:
The question of analog vs. digital audio is one of the more hotly debated questions in the world of music, film and media today. Does digital sound better? Does analog sound better? Is there even a noticeable difference?
It’s impossible to understand the difference completely without understanding what distinguishes analog audio from digital audio. A full discussion of these terms is best left to your curriculum and discussions with your mentor in the studio. For now, though, here’s a brief explanation of what these two words mean, and the differences between them.
Analog refers to a continuously changing representation of a continuously variable quantity. Digital, however, refers to representing these variable quantities in terms of actual numbers, or digits. The last two sentences seem a bit complex, but let’s try to simplify them with an example. If you consider the numbers 1 and 2 on a number line, there are actually an infinite number of points between 1 and 2. This is what analog represents—the infinite number of possibilities between 1 and 2. Digital, on the other hand, only looks at certain number of fixed points along the line between 1 and 2 (for example, 1 ¼, 1 ½, 1 ¾, and 2).
Can you see the difference? Digital takes a few “snapshots” of the number line, while analog takes the whole line into account.
As another example, think of analog vs. digital as the difference between seeing something in real life and watching it on film. When we see something happen in real life, there are no “spaces” between what we see, so we’re watching it happen in analog. Film, however, is actually a series of still photographs that are taken in rapid-fire intervals, and when we see them in succession, it tricks our minds into thinking we’re seeing a continuous flow of movement. So in a manner of speaking, when we watch the event happen on film, we’re watching it digitally, because we’re watching increments of the event, rather than the whole thing in fluid motion. (Not to be confused with digital video vs. film, which is another discussion completely!)
Let’s bring this idea into audio, music, and the studio. Sound occurs naturally in analog–that is to say, sound occurs in a continuous set of waves that we hear with the human ear. (Think of it as a “wavy” line with an infinite number of points along it.) When we capture that sound in a way that represents all the possible frequencies, we’re recording in analog; when we use computers to translate the sound into a series of numbers that approximate what we’re hearing, we’re recording in digital.
Thus, a purely analog recording would be something that was recorded on tape and produced using manual equipment to mix, master and press into a vinyl LP. A purely digital recording would be recorded on a computer program such as Pro Tools, mixed, mastered and produced digitally, and eventually burned onto a CD as an MP3 or audio file.
The most ironic aspect of the debate about digital vs. analog recording is that nowadays a lot of music is a combination of the two. For example, you might record a song onto analog tape, but mix and master it digitally, or release it on the Internet as an MP3.
So what’s the difference in quality between analog and digital? The idea between digital recording is that our ears and brains technically can’t determine the spaces between the digital values, just like our brains interpret film as continuous motion. However, to many people, analog sound tends to be warmer, has more texture and is thought to capture a truer representation of the actual sound. Digital is felt to be somewhat cold, technical and perhaps lacking in analog’s nuance.
However digital is much cheaper. Recording an album with analog technology can require a whole studio full of equipment, but with digital recording technology, it’s possible to record a whole album in a bedroom on a laptop. And whereas analog technology can wear out or be damaged, digital media can last for an indefinite length of time.
Today many recording artists, both major and independent, record using a mixture of digital and analog techniques. While analog audio does give warmth and a truer sound quality, digital is cheaper to work with and offers more control over the finished product.
Help me!
What is the net force acting on a 7.85 kg object moving at a constant speed of 15.55 m/s
How much work is done to move a 1,000 N car 20 meters?
Answer:
The answer is 20,000 JExplanation:
The work done by an object can be found by using the formula
workdone = force × distanceFrom the question
force = 1,000 N
distance = 20 m
We have
workdone = 1000 × 20
We have the final answer as
20,000 JHope this helps you
If a rock is skipped into a lake at 24 m/s2 with what force as the rock
thrown if it was '1,75 kg?
Answer:
Force = Mass * Acceleration
Explanation:
24*1.74= 42 N
Geologists measure the amplitude of seismic waves using the Richter scale. If an earthquake of 7.3 has a greater amplitude than an earthquake of 4.4, which one carries more energy? Explain your answer.
Answer: The 7.3 earthquake carries more energy
Explanation:
Because, it has a higher amplitude
During a spacewalks an astronaut lets go of a tool, causing it to float away and bounce off the side of the space shuttle. The astronaut saw
the the tool hit the shuttle but did not hear it hit the shuttle. Why would the astronaut be able to see the tool hit the shuttle but not hear it
hit the shuttle?
FISH
Answer:
In space noone can hear you scream.....
Explanation:
There is no sound in space. Sound, like light or heat, is a wave. However, one major distinction is that, unlike light or heat (radiation), sound needs a medium to travel. Sounds require the presence of molecules or particles to travel from one region to another.
What is the pH of 0.001 M HNO3?
Answer:
i think its 2.0
Explanation:
hopefully i am right ...
HEY CAN ANYONE PLS ANSWER DIS!!!!!!
Answer:
Explanation:
1.wrap bar magnet in a plastic baggie and remove the iron filings from the mixture by using a bar magnet. Place a small piece of scrap paper on the scale and “tare” the scale. Then place filings on the scrap paper and record (e) the mass of the iron filings. Don't throw out the iron–save it to be recollected.
2.When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture. Salt can be separated from a solution through evaporation.
3.Sand (mostly silicon dioxide) is not.
Pour the salt and sand mixture into a pan.
Add water. ...
Heat the water until the salt dissolves. ...
Remove the pan from heat and allow it to cool until it's safe to handle.
Pour the salt water into a separate container.
Now collect the sand.
Pour the salt water back into the empty pan.
Heat the salt water until the water boils. Continue boiling it until the water is gone and you're left with the salt.
Another way you can separate the salt water and sand is to stir up the sand/salt water and pour it through a coffee filter to capture the sand.
Answer:
1. Separating iron from mixture
Provided a magnetmoved the magnet close to the mixtureseparated the magneted iron from the magnet.2. Separating sand from mixture
poured the mixture in a separation funnelfiltered off the sand from the mixture.3. Separating Salt mixture
boild the mixturecontinued heating to drynessthe remimants left behind is the saltPlease this question
Answer:
1. 7
2. Mass
3. (b) Distance
4. (b) Force
5. (a) ML⁻¹T⁻²
6. (c) M⁻¹LT²
7. (c) M⁻¹L³T⁻²
8. (c) Pressure
9. (c) Young's modulus
10. (b) zero
11. (c) Infinite
12. (d) 1:4
13. (b) 0.6 J
14. (c) 45 N
15. (a) 0.4 cc
16. (a) 176.7 °F
17. (a) 10°C
18. (c) 50 K
19. b. H
Explanation:
15. Whereby the compressibility = 4 × 10⁻⁵ Pa⁻¹
The compression ratio for 100 Pa = 4 × 10⁻⁵ × 100 = 4 × 10⁻³
The Change for 100 cc = 4 × 10⁻³ × 100 cc = 0.4cc
HELP ASAP! Will make BRAINLEST
Which two options are reasons that electromagnetic waves can be used effectively in communication devices?
A. The speed at which they carry information can be varied.
B. They require no wires to carry information
C. Any type of electromagnetic wave can be used for communication.
D. They can travel through either air or other types of matter.
Answer:
B and D
Explanation:
Did the quiz
Electromagnetic waves require no wires to carry information and can travel through either air or other types of matter. Therefore, options (B) and (D) are correct.
What are electromagnetic waves?Electromagnetic radiations are produced when an electric field comes in contact with the magnetic field. Electromagnetic waves are the composition of oscillating electric as well as magnetic fields.
Infrared radiation is used in security cameras and used for night vision. UV rays are useful to detect forged banknotes as the real banknotes don’t turn fluorescent under UV light.
Electromagnetic radiation can travel energy in a vacuum or air. Electromagnetic waves play a vital role in today's communication technology. Electromagnetic waves are specially used in RADARS to detect aircraft in the earth's atmosphere.
Radio waves, microwaves, infrared (IR), and visible light can be used for communication. Radio waves are used to transmit information on television and radio programs. Microwaves are used to transmit satellites, mobile phones, and television.
Learn more about the electromagnetic wave, here:
https://brainly.com/question/3001269
#SPJ5
Ancient gold coins have been found in Greece and Italy. What property allows for gold to be stamped into coins?
Answer: malleability
Explanation:
A soccer player runs 80 yards down the field and then 30 yards back toward her
original starting point. This takes 55 seconds total. What is the average velocity of
the soccer player?
0.50 yd/s
0.91 yd/s
1.10 yd/s
2.00 yd/s
1. There is a group of kids playing tee ball in front of your house. If the bat is 5kg traveling with a velocity
of 8m/s, with what velocity will the 1.5 kg ball travel after it is hit by the bat?
Answer: tug vi
Explanation:
Because
At highway speeds, a particular car is capable of an acceleration of about 1.6 m/s?. At this rate,
does it take the car to speed up from 80 km/hr to 110 km/hr? Round your answer to
Two significant figures
Given parameters:
Acceleration of the car = 1.6m/s
Initial speed = 80km/hr
Final speed = 110km/hr
Solution:
Time taken to achieve this speed = ?
Solution:
Acceleration is the rate of change of velocity with the time taken.
Mathematically;
a = [tex]\frac{V - U}{T}[/tex]
where a is the acceleration
V is the final velocity
U is the initial velocity
T is the time taken
Now make the unknown time the subject of the expression;
aT = V - U
T = [tex]\frac{V - U}{a}[/tex]
Convert the given acceleration to km/hr;
1.6m/s = 1.6 x [tex]\frac{m}{s}[/tex] x [tex]\frac{1km}{1000m}[/tex] x [tex]\frac{3600s}{1hr}[/tex] = 5.76km/hr
Input the parameters and solve;
T = [tex]\frac{110 - 80}{5.76}[/tex] = 5.2hrs
The time taken is 5.2hrs
Write a short story where the main character needs protection from two different EM radiations
What are three ways less gravity changes the human body
A stone has a mass of 2kg and volume of 0.00025m3, what is the density of the stone?
Answer:
density = [tex]\frac{mass}{volume}[/tex]
so,
d = 2/0.00025
d = 8000 kg/m3
While Juliet was watching Romeo ran at a speed of 3.3 m/s straight off the end of a diving board
that is 3 m above the water. How long was he airborne before he hit the water?
What do you put in the bowl first? milk or cereal?
Answer:
i put cereal first
Explanation:
cereal
A spacejet travels 800 miles/h .how long does it take to travel 1km
The solar system revolves around the center of the Milky Way.
True or false
Answer:
yes
Explanation:
Answer: True
Im sure of it i took the test
Explanation:
Igneous rock can be changed into which type of rock through the application of heat and pressure?
metamorphic rock
clastic sedimentary rock
non-foliated igneous rock
foliated igneous rock
Answer:
metamorphic rock
Explanation:
Igneous rocks can be changed into metamorphic rocks when heat and pressure are applied to the rock.
Pressure and heat in the presence of a fluid phase cause metamorphic transformation of a prolith.
At the right temperature and pressure, an igneous rock will not form magma but will undergo mineralogical changes to form metamorphic rocks. These changed rocks have different mineral facies that are different from those of the prolith.Through heat and pressure, igneous rocks can be transformed into metamorphic rocks.
Answer:
classic sedimentary rock
Explanation:
how far will a 600 kg boat travel in 12 s if there is a constant 900 N force on it and it starts from rest?
Answer:
Distance, S = 108 meters.
Explanation:
Force is given by the multiplication of mass and acceleration.
Mathematically, Force is;
[tex] F = ma[/tex] ............equation 1
Where;
F represents force measured in Newton. m represents the mass of an object measured in kilograms. a represents acceleration measured in meters per seconds square.Given the following data;
Since the boat is starting from rest, initial velocity, u = 0
Mass, m = 600kg
Time, t = 12s
Force, F = 900N
Substituting into equation 1, we have;
[tex] 900 = 600*a[/tex]
[tex]a = \frac{900}{600}[/tex]
Acceleration, a = 1.5 m/s²
T
To solve for distance, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Substituting the values into the equation, we have;
[tex] S = 0(12) + \frac {1}{2}*1.5* 12^{2}[/tex]
[tex] S = 0 + 0.75* 144[/tex]
Distance, S = 108m
Therefore, the distance covered by the boat is 108 meters.
I took a picture of my problem.
Consider a spring that does not obey Hooke's law very faithfully. One end of the spring is fixed. To keep the spring stretched or compressed an amount x, a force along the x-axis with x-component Fx=kx−bx2+cx3 must be applied to the free end. Here k=100N/m, b=700N/m2, and c=12000N/m3. Note that x>0 when the spring is stretched and x<0 when it is compressed.
Answer:
The work done will be 0.115 J.
Explanation:
Given that,
[tex]k=100\ N/m[/tex]
[tex]b=700\ N/m^2[/tex]
[tex]c=12000\ N/m^3[/tex]
A force along the x-axis with x-component,
[tex]F(x)=kx-bx^2+cx^3[/tex]
Suppose, How much work must be done to stretch this spring by 0.050 m from its unstretched length?
We need to calculate the work done
Using formula of work done
[tex]W(x)=\int{F(x)dx}[/tex]
Put the value into the formula
[tex]W(x)=\int{(kx-bx^2+cx^3)dx}[/tex]
[tex]W(x)=\dfrac{kx^2}{2}-\dfrac{bx^3}{3}+\dfrac{cx^4}{4}[/tex]
Put the value of k,b,c and x
[tex]W(0.050)=\dfrac{100\times(0.050)^2}{2}-\dfrac{700\times(0.050)^3}{3}+\dfrac{12000\times(0.050)^4}{4}[/tex]
[tex]W(0.050)=0.115\ J[/tex]
Hence, The work done will be 0.115 J.
The value of spring displacement is greater than zero. Therefore, spring is stretched.
Force in spring :
It is given as, [tex]F=kx[/tex]
Where k is constant and x is amount of displacement.
The force function is given that,
[tex]F(x)=kx-bx^{2}+cx^{3}[/tex]
Here given that, [tex]k=100N/m, b=700N/m^{2} , c=12000N/m^{3} .[/tex]
Substitute all values in above equation,
[tex]F(x)=100x-700x^{2} +12000x^{3}[/tex]
To check, the spring is stretched or it is compressed.
Substitute f(x) = 0
We get x is greater than zero.
Thus, The value of spring displacement is greater than zero. Therefore, spring is stretched.
Learn more about the spring force here:
https://brainly.com/question/14970750
What forces cause acceleration?
Answer:
friction, should be correct i think!
What is the momentum of a 950 kg car moving at 10.0 m/s?
9.5 kgm/s
95 kgm/s
9500 kgm/s
95000 kgm/s
Answer:
The answer is 9500 kgm/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocityFrom the question
mass = 950 kg
velocity = 10.0 m/s
We have
momentum = 950 × 10
We have the final answer as
9500 kgm/sHope this helps you
This waterbottle has a mass of .5 kg. If the net force acting on the bottle is five and to the right what is the bottles acceleration (hint: use formula a=f/m
Answer:
a = 10/s^2
Explanation:
Answer:
a=10 m/s *2 right
Explanation:
The net force (0.5 kg) divided by the mass (5 N) = 10
The force moved the object to the right.
So you Would put this in the equation a=___ m/s *2 _____
And you would get a=10m/s*2 right
HOPE YOU LEARNED SOMETHING SO WHEN WE GO BACK TO SCHOOL YOU WILL KNOW WHAT YOU ARE TALKING ABOUT ! : )
The question is 6 please help
Answer:
none of the answers are correct
Explanation:
Lithium = 3
Berillium = 4
Boron = 5
Carbon = 6
1) Calculate the speed of a runner who runs 100 m in 20s
This is how you calculate his speed, for the 100metres. That is, the average speed for the entire distance, including the start from intertia until the race end where the athlete is decelerating. Multiply the time by 10, and divide 3600 by that figure. i.e. 10 by10 equals 100. Divide 3600 by 100 and you get 36 which is the speed figure you requested.
A female athlete ran 200 metres a few years ago and in the middle section of the race covered 100 metres in that race in a time under 10 seconds. That is, she ran a sub 10second 100metres from a flying start. This great athlete from Slovenia, also ran a 100 metre race (from a stationary start) in a time under 11 seconds, when she was 48 years of age. Her name is Merlene Ottey.
Which statement describes an endothermic reaction? A. Energy is released by the reaction. B. Energy is absorbed by the reaction. C. No energy is transfered by the reaction. D. Energy is created in the reaction.
Answer:It's B energy is absorbed by the reaction,hope this helps
Explanation:
Any reaction in which energy is absorbed is said to be endothermic. Hence, option B is correct, but the rest are not correct.
What is an Endothermic Reaction?In every chemical process, energy is involved. When new bonds form in products, energy is produced. Reactant bonds are broken using energy. Exothermic reactions are those that produce more energy when new bonds form in the products than is needed to break existing bonds in the reactants.
In contrast, endothermic reactions are the opposite. Endothermic reactions release more energy when new bonds form in the products than is required to break bonds in the reactants.
During the reaction, a large amount of energy is absorbed.
To get more information about Endothermic Reaction :
https://brainly.com/question/23184814
#SPJ5