1. Name two basic differences between normal galaxies and active galaxies.
2. What is the most likely range of values for Hubble’s constant? What are the uncertainties in its value?

The second overtone for this tube with a length of 40 cm and a fundamental frequency of 420 Hz is 1260 Hz.

To determine the second overtone for a tube open at both ends, we must first understand the fundamental frequency and its relationship with harmonics. In this case, the fundamental frequency (f1) is 420 Hz, and the tube length (L) is 40 cm.

For an open tube, the fundamental frequency is related to the speed of sound (v) and the length of the tube as follows:

f1 = v / (2 * L)

The second overtone is the third harmonic (f3) for an open tube. The frequency of the third harmonic can be determined by:

f3 = 3 * f1

Using the given fundamental frequency:

f3 = 3 * 420 Hz
f3 = 1260 Hz

To learn more about : frequency

https://brainly.com/question/254161

#SPJ11

To determine the minimum and maximum positions of the particle, we need to know more information about the system. However, we can use the principle of conservation of energy to make some observations.

Since the total mechanical energy of the particle is negative, we know that the particle must be in a state of potential energy greater than its kinetic energy. This means that the particle could be at the top of a hill, for example, where it has a large potential energy but a small kinetic energy. Alternatively, the particle could be in a region of space where there is a large attractive force acting on it, such as a gravitational or electric field, which could also contribute to a negative total mechanical energy. Without more information, it is not possible to determine the exact minimum and maximum positions of the particle. Conservation of energy is a fundamental law of physics stating that energy cannot be created or destroyed, only transformed from one form to another or transferred from one object to another.

Learn more about conservation of energy here:

https://brainly.com/question/11573747

#SPJ11

Assuming that the particle is subject to conservative forces, the total mechanical energy E of the particle is the sum of its kinetic energy and potential energy. Mathematically,

E = K + U

where K is the kinetic energy of the particle, and U is its potential energy.

Since the total mechanical energy E of the particle is given as -8 J, we have:

E = -8 J

Let's assume that the potential energy U has a minimum value of Umin and a maximum value of Umax.

Then we can write:

E = K + Umin (at the minimum position)

E = K + Umax (at the maximum position)

Subtracting the first equation from the second equation, we get:

E = (K + Umax) - (K + Umin)

E = Umax - Umin

Substituting the value of E, we get:

-8 J = Umax - Umin

This means that the difference between the maximum potential energy and the minimum potential energy is 8 J.

Since potential energy is a relative quantity, we can choose any point as a reference and assign it a potential energy of zero.

Let's assume that the minimum potential energy occurs at this reference point.

Then we can say:

Umin = 0 J

Umax = 8 J

Substituting these values in the equations for E, we get:

-8 J = K + 0 J (at the minimum position)

-8 J = K + 8 J (at the maximum position)

Solving for K, we get:

K = -8 J (at the minimum position)

K = -16 J (at the maximum position)

Since kinetic energy is always non-negative, the second equation is not physically possible. Therefore, the particle cannot reach the position where its kinetic energy is -16 J.

Therefore, the minimum position of the particle is the point where its kinetic energy is -8 J, and the maximum position is the point where its potential energy is 8 J.

To know more about conservative forces visit link :

https://brainly.com/question/31171503

#SPJ11

The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.

(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]

The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].

(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].

(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]

(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].

To learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

The observed value of the total radiant energy flux density at the earth from the sun, integrated over all emission wavelengths and referred to the mean earth-sun distance, is approximately 1,366 watts per square meter.

This value is known as the solar constant and is an important factor in understanding the earth's climate and energy balance. It represents the amount of solar energy that is received per unit area at the top of the earth's atmosphere and is a key input for models of global climate change.

Learn more about energy flux

https://brainly.com/question/30480603

#SPJ4

Answer: The apple is lifted approximately 0.1232 m (rounded to four decimal places).

Explanation: To find the distance the apple is lifted, we can use the formula for work: work = force x distance.

The force required to lift the apple is equal to the weight of the apple, which can be calculated using the formula:

weight = mass x acceleration due to gravity.

we have work = weight x distance, 5.4 J = (0.178 kg x 9.81 m/s^2) x distance.

Solving for distance, we get a distance ≈ of 0.1232 m (rounded to four decimal places).

Here is an article on work, force, and distance in physics: https://byjus.com/physics/work-energy-power/#:~:text=The%20work%20done%20by%20a,only%20magnitude%20and%20no%20direction.

False. Here is a step-by-step explanation:

1) Relative dating methods and absolute dating methods are two types of techniques used by geologists to determine the age of rocks and fossils.

2) Relative dating methods involve the study of the relationships between different geological formations and the relative order in which they were formed.

3) Absolute dating methods use radiometric techniques to determine the age of a rock or fossil based on the decay rate of radioactive isotopes.

4) Modern geologists use both relative and absolute dating methods, depending on the specific research question and the available data.

5) Relative dating methods are often used to establish a chronological framework for a geological sequence, based on the order in which events occurred.

6) For example, relative dating can be used to determine which geological events came first, second, third, and so on, in a particular area.

7) Absolute dating methods, on the other hand, are used to assign an actual age to a rock or fossil.

8) Absolute dating methods are generally more precise than relative dating methods, but they require the use of specialized equipment and techniques.

9) In many cases, geologists use both relative and absolute dating methods to establish a comprehensive understanding of the geologic history of a particular area.

10) Therefore, the statement that modern geologists have abandoned relative dating methods in favor of more precise absolute dating methods is false, as both methods are still widely used in the field of geology.

To know more about Modern geologists :

https://brainly.com/question/28274168

#SPJ11

where

m is the mass

c is the specific heat capacity

ΔT is the change in temperature

In your problem,

m=2.5 kg

c=2.60 kJ⋅°C-1kg-1

Δ

∴ q=2.5kg×2.60 kJ⋅°C-1⋅kg-1×60°C=390 kJ

120 ccf of natural gas converted to kWh electricity is equivalent to approximately 3,646.19 kWh of electricity

To convert 120 ccf of natural gas to kWh of electricity:

1. Convert ccf to BTU (British Thermal Units): 1 ccf (100 cubic feet) of natural gas contains approximately 103,700 BTU.
2. Convert BTU to kWh: 1 BTU is equal to 0.000293071 kWh.

Multiply the amount of natural gas in ccf by the BTU content:
120 ccf * 103,700 BTU/ccf = 12,444,000 BTU

Convert the BTU to kWh:
12,444,000 BTU * 0.000293071 kWh/BTU ≈ 3,646.19 kWh

So, 120 ccf of natural gas is equivalent to approximately 3,646.19 kWh of electricity after the conversion calculations(to two decimal places).

More on electricity: https://brainly.com/question/15235368

#SPJ11

Lower employment-to-population ratios in Europe than in the United States. Frequent holidays may decrease the total number of working days, resulting in lower employment rates. Thus the correct option is B.

Europe has lower employment-to-population ratios than the US. While more frequent holidays may enhance work-life balance in Europe, they might also reduce the overall number of working days, which would lead to lower employment rates.

However, given that working hours can differ greatly between industries, job kinds, and nations, this does not necessarily imply that individuals in Europe work fewer hours per year than those in the United States. Workplace regulations and cultural perspectives on work can also have an impact on employment rates and working hours.

Learn more about employment:

https://brainly.com/question/28183134

#SPJ4

B) Lower employment-to-population ratios in Europe than in the United States.

Answer - While European workers may have more frequent holidays, this does not necessarily mean they work fewer hours overall or that there are more jobs available. In fact, European countries often have stricter labor laws and regulations which can make it harder for employers to hire new workers. As a result, the employment-to-population ratio tends to be lower in Europe than in the United States, meaning a smaller percentage of the population is employed.

To learn more about employment , click on this -

brainly.com/question/1361941

#SPJ11

The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.

The average angular acceleration can be calculated using the formula:

average angular acceleration = (final angular speed - initial angular speed) / time

Plugging in the given values, we get:

average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s

average angular acceleration = -2.56 rad/s2

Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.

|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .

Therefore, the correct answer is (b).

To know more about magnitude, here

brainly.com/question/14452091

#SPJ4

The type of bar optic you are describing is commonly known as a "free flow pourer" or "free pour spout."

These types of pourers do not have a specific amount they dispense but instead rely on the bartender's skill to regulate the flow of liquid by applying and releasing pressure on the bottle. The flow of liquid stops when pressure is released, allowing for precise and controlled pouring.

Free flow pourers are commonly used in bars and restaurants to pour spirits, mixers, and other liquids into cocktails and drinks. They can come in a variety of sizes and materials, including plastic, metal, and silicone, and are easily replaceable when worn or damaged.

Learn more about bar optic

https://brainly.com/question/30694096

#SPJ4

Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would experience a decrease in frequency.

option C.

The Doppler effect is a phenomenon where the frequency of waves (such as electromagnetic waves or sound waves) is shifted as a result of the relative motion between the source of the waves and the observer. When a source of waves is moving away from an observer, the waves get stretched out, resulting in a decrease in frequency. This is known as redshift for light waves, which are a type of electromagnetic waves.

In the context of a galaxy moving away from Earth, the electromagnetic waves (such as light) emitted by the galaxy would experience a redshift, which means the frequency of the waves would decrease. This is a key observation in astronomy and cosmology that has been used to provide evidence for the expanding universe and the Big Bang theory, as galaxies in the universe are generally observed to be moving away from each other, causing their light to be redshifted.

Learn more about doppler effect here: https://brainly.com/question/3841958

#SPJ1

The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

The work done by friction is equal to the change in the kinetic energy of the crate, which is zero because it slides down the ramp at a constant speed. Therefore, the friction force does negative work equal in magnitude to the work done by the gravitational force on the crate:

W_friction = -W_gravity

where

W_gravity = mgh

and h is the vertical distance that the crate slides down the ramp:

h = 12 sin 35° = 6.93 m

Thus,

W_friction = -mgh = -(900 N)(6.93 m)(9.81 m/s^2) = -60.8 kJ

The negative sign indicates that the work done by friction is in the opposite direction to the displacement of the crate, which is down the ramp. The thermal energy produced by friction is equal to the magnitude of this work, or 60.8 kJ.

Learn more about thermal energy

https://brainly.com/question/18989562

#SPJ4

The total force exerted by the strings on the neck is 3061 N

We must determine the tension in each string and add it together to determine the overall force the strings are applying on the neck.

The wave speed equation may be used to determine the tension in a string:

v = fλ

where v is the speed of the wave (which is the same as the speed of the string), f is the frequency of the note, and λ is the wavelength of the wave (which is twice the length of the string).

For the g and d strings:

λ = 2(0.865 m) = 1.73 m

v = fλ

v_g = (98 Hz)(1.73 m) = 169.5 m/s

v_d = (73.4 Hz)(1.73 m) = 127.0 m/s

The tension in each string can be found using the wave equation:

T = [tex]μv^2/λ[/tex]

where T is the tension in the string, μ is the linear mass density of the string (mass per unit length), and v and λ are the speed and wavelength of the wave on the string.

For the g and d strings:

[tex]T_g = (5.8 g/m)(169.5 m/s)^2/1.73 m = 320 N[/tex]

[tex]T_d = (5.8 g/m)(127.0 m/s)^2/1.73 m = 196 N[/tex]

For the a and e strings

λ = 2(0.865 m) = 1.73 mv = fλ

v_a = (55 Hz)(1.73 m) = 95.2 m/sv_e = (41.2 Hz)(1.73 m) = 71.2 m/s

[tex]T_a = (26.8 g/m)(95.2 m/s)^2/1.73 m = 1643 N[/tex]

[tex]T_e = (26.8 g/m)(71.2 m/s)^2/1.73 m = 902 N[/tex]

The total force exerted by the strings on the neck is:

F_total = T_g + T_d + T_a + T_e

F_total = 320 N + 196 N + 1643 N + 902 N

F_total = 3061 N

Learn more about total force

https://brainly.com/question/30149537

#SPJ4

The amount of energy that must be removed from 0.811 kg of water to cool it from 91°C to 15°C is approximately 61.636 kcal.

To calculate the change in energy for this process, we will use the specific heat capacity of water and the equation:

[tex]Q = m . c .[/tex]ΔT

where:
Q = change in energy (in kcal).
m = mass of water (in kg).
c = specific heat capacity of water (in kcal/kg°C).
ΔT = change in temperature (in °C).

The specific heat capacity of water is approximately 1 kcal/kg°C.

Therefore, 61.636 kcal of energy must be removed from 0.811 kg of water to cool it from 91°C to 15°C.

Learn more about the amount of energy that must be absorbed or lost to raise or lower the temperature, at: https://brainly.com/question/29418076

#SPJ11

This is the same speed as the elevator's initial speed, so the elevator and the cylinder should be in sync again after one complete revolution.

When the elevator is moving upward at a speed of 2.3 m/s, the cable is unwinding from the cylinder at a rate that is equal to the elevator's speed. Since the diameter of the cylinder is 1.2 m, its circumference is:

C = πd = 3.7699 m

Therefore, the length of cable that unwinds from the cylinder in one second is:

L = 2.3 m/s × 1 s = 2.3

Dividing this by the circumference of the cylinder gives us the number of complete revolutions that the cylinder makes in one second:

N = L / C = 2.3 m / 3.7699 m = 0.6097 revolutions/s

If the cylinder turns one complete revolution, it means that N = 1. Therefore, the time it takes for the cylinder to complete one revolution is:

t = 1 / N = 1 / 0.6097 revolutions/s = 1.639 sDuring this time, the elevator has slowed down and come to a stop. The speed of the cylinder during this time can be calculated using the formula:

v = ωr

where ω is the angular velocity of the cylinder, and r is its radius. Since the diameter of the cylinder is 1.2 m, its radius is 0.6 m. One complete revolution corresponds to an angle of 2π radians, so the angular velocity of the cylinder is:

ω = 2π / t = 2π / 1.639 s = 3.834 rad/s

Therefore, the speed of the cylinder during the time it takes to make one complete revolution is:

v = ωr = 3.834 rad/s × 0.6 m = 2.3004 m/s

Learn more about revolution.

https://brainly.com/question/1291142

#SPJ4

Answer:

Explanation: honestly i don’t speak spanish so please explain with english

After switch S is closed, the capacitors in the circuit start to discharge.

The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],

where C is the capacitance of the capacitors and V is the initial voltage across them.

As the capacitors discharge, the voltage across them decreases and so does the stored energy.

When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.

At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.

Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.

For more such answers on Capacitance
https://brainly.com/question/16998502

#SPJ11

The final speed of an object can be calculated using the formula:

v = v0 + at, where v0 is the initial velocity of the object, a is the constant acceleration, and t is the time taken to travel a certain distance.

Acceleration is defined as the rate of change of velocity over time, which means it determines how quickly the velocity of an object changes. If the acceleration is positive, the object's velocity will increase, and if it is negative, the object's velocity will decrease.

Adding this change in velocity to the initial velocity gives us the final velocity of the object.

To know more about Acceleration, here

brainly.com/question/12550364

#SPJ4

--The complete question is, What is the formula to calculate the final speed of an object, given its initial velocity, acceleration, and the time it takes to travel a certain distance? --

To determine the spring constant of the unknown spring, the student should graphically analyze the data by plotting the force applied to the spring (calculated as the product of the mass and acceleration due to gravity) on the y-axis and the displacement of the spring on the x-axis.

This should result in a linear relationship, as described by Hooke's Law (F=kx). The slope of the line will represent the spring constant (k). The student should perform linear regression on the data to determine the slope of the line and therefore the spring constant. It is important to perform multiple trials and calculate the average spring constant to ensure accuracy. Given the data provided, the slope of the line should be equal to the spring constant, which can be calculated using any graphing software or manually plotting the data on a graph.

*complete question; A student is asked to perform an experiment about springs, but with a spring of an unknown spring constant. the student performs four trials of the experiment with blocks of different mass and collects the data that are shown in the table. how should the student graphically analyze the data in order to determine the spring constant of the spring?

More on spring constant: https://brainly.com/question/30827579

#SPJ11

The largest x-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm is 0.632 nm.

To find the largest X-ray wavelength that can be diffracted by crystal planes with a separation of 0.316 nm, we can use Bragg's Law:

nλ = 2d sinθ

where n is an integer representing the order of diffraction, λ is the wavelength, d is the separation between crystal planes (0.316 nm), and θ is the angle of incidence. To find the largest possible wavelength, we need to consider the lowest order of diffraction (n = 1) and the maximum angle of incidence (θ = 90°).

Now we can plug in the values and solve for λ:

1λ = 2(0.316 nm) sin(90°)

λ = 2(0.316 nm) * 1

λ = 0.632 nm

The largest X-ray wavelength that can be diffracted by crystal planes is 0.632 nm.

Learn more about Bragg's Law:

https://brainly.com/question/14617319

#SPJ11

The molecules in the Earth's atmosphere scatter blue wavelengths of light, making the sky appear blue during the day. The correct answer is a.

This phenomenon is known as Rayleigh scattering, which occurs when sunlight enters the Earth's atmosphere and interacts with the gas molecules in the air. The shorter, blue wavelengths of light are more easily scattered by the molecules in the atmosphere, while the longer, red wavelengths are less affected and continue to travel in a more direct path.

As a result, when we look up at the sky during the day, we see a blue color because the blue light is being scattered in all directions by the atmosphere. At sunrise and sunset, the sky appears more orange or red because the sun's light has to travel through more of the atmosphere, causing more scattering of the shorter, blue wavelengths and leaving more of the longer, red wavelengths to reach our eyes.

Learn more about  Earth's atmosphere

https://brainly.com/question/13154099

#SPJ4

Cause: Human population grows worldwide.

Effect: Fossil fuels burn, cities become more industrialized, glaciers melt, climates change, and rain falls in unusual amounts.

Global warming refers to the long-term increase in Earth's average surface temperature, primarily due to the increasing levels of greenhouse gases, such as carbon dioxide, in the atmosphere. These gases trap heat from the sun, preventing it from radiating back into space and causing the Earth's temperature to rise.

Global warming has a range of potential impacts, including rising sea levels, more frequent and severe heat waves, changes in precipitation patterns, and more intense storms. It is considered one of the most significant and pressing environmental challenges facing the planet today.

Find out more on global warming here: https://brainly.com/question/3553382

#SPJ1

Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:

1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.

These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.

To know more about Ampere's Law with Maxwell's Addition:

https://brainly.com/question/29831953

#SPJ11

The circled vector on the diagram below represents the tension on the rope.

The option C is correct

Tension is described as  the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.

T = mg + ma

We know that the force of tension is calculated using the formula T = mg + ma.

In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.

Learn more about tension at: https://brainly.com/question/24994188

#SPJ1

The distribution of cones at the point of image formation is crucial in resolving two point sources

To resolve two point sources, a distribution of cones must occur where the image strikes the retina. Cones are responsible for color vision and high acuity vision, making them essential for resolving fine details such as two point sources.

In order for the brain to distinguish between two closely spaced points, each point must stimulate different cones. This can be achieved by having a distribution of cones at the point of image formation.

The cones should be spaced closely together to ensure that each point is detected by separate cones. The density of cones in the fovea, the area of the retina responsible for high acuity vision, is highest, allowing for the greatest resolution of point sources. .

To learn more about : distribution

https://brainly.com/question/28027633

#SPJ11

The crater on the moon will be more well-preserved than the crater on the Earth.

The main reason for this is the lack of atmosphere on the moon. On Earth, the atmosphere absorbs some of the energy from the impact, reducing the severity of the crater. Additionally, erosion from wind and water can also affect the appearance of the crater on Earth. On the moon, however, there is no atmosphere to absorb the energy from the impact, so the crater will retain its original shape and size for a longer period of time.

The moon also lacks the same degree of erosion processes as Earth. As a result, the craters formed on the moon are often well-preserved and can be used to study the history of impacts on the lunar surface.

To learn more about crater on the moon, here

https://brainly.com/question/24409142
#SPJ4

When measuring the pendulum period, the interface should measure the time between two adjacent blocks of the photogate. This method is used because it accurately captures the time taken for the pendulum to complete one full oscillation.

The photogate is an optical device that detects the interruption of a light beam by the pendulum bob. As the pendulum swings, it passes through the photogate and blocks the light, triggering a timing event. When the pendulum returns and blocks the light again, another timing event is triggered.

Measuring the time between these two adjacent blocks allows the interface to determine the time taken for one complete oscillation (from one extreme to the other and back). This method is reliable and precise, as it directly measures the time it takes for the pendulum to cover its full path, which is the definition of its period.

Other measurement techniques, such as recording the time of multiple oscillations and dividing by the number of cycles, can also be used. However, using the time between adjacent blocks of the photogate provides a more direct and accurate measurement of the pendulum period.

Know more about photogate here:

https://brainly.com/question/13586408

#SPJ11  

To calculate the power, in diopters, of eyeglasses that will correct vision when held 1.50 cm from the eyes, you need to know the individual's refractive error in diopters.

Refractive error refers to the degree of near sightedness (myopia), farsightedness (hyperopia), or astigmatism that an individual has. This value is typically measured by an optometrist or ophthalmologist using a phoropter.

Once the refractive error is known, the power of the corrective eyeglasses can be determined by dividing the refractive error by the distance (in meters) between the glasses and the eyes. In this case, since the glasses are held 1.50 cm from the eyes, the distance in meters would be 0.015 meters.

For example, if the individual has a refractive error of -2.00 diopters, the power of the corrective eyeglasses when held 1.50 cm from the eyes would be -2.00 / 0.015 = -133.33 diopters.

To know more about Refractive error:

https://brainly.com/question/30162760

#SPJ11

Answer:

Speed of Skater = 8.16 m/s

Explanation:

Using kinetic energy:

[tex]M_{t} = M_{skater} + m_{ball}\\\frac{1}{2}M_{t}V_{i}^2 = \frac{1}{2}*M*V_{s} ^2+\frac{1}{2}*m*V_{b}^2\\ M_{t}V_{i}^2 = M_{s}*V_{s} ^2+m_{b}*V_{b}^2\\M_{t}V_{i}^2-m_{b}*V_{b}^2 = M_{s}*V_{s} ^2\\(M_{t}V_{i}^2-m_{b}*V_{b}^2)/M_{s} = V_{s} ^2\\V_{s} = \sqrt{\frac{(M_{t}V_{i}^2-m_{b}*V_{b}^2)}{M_{s}} } \\[/tex]

This gives the skater a velocity of 8.16 m/s after throwing the ball