Answer:
1. Ans: B
Explanation: Pinakbet, which contains vegetables such as eggplants and kalabasa, are physically combined. Therefore, the pinakbet is an example of a mixture
2. Ans: A
Explanation: Heterogenous are different building blocks that are mixed UNEVENLY.
if you mix 538 grams in water and bring it to a final volume of 647 ml, what will be the concentration of the resulting solution in g/l? answers cannot contain more than one decimal place.
Answer : When mixing 538 grams of a substance into 647 ml of water, the concentration of the resulting solution in g/L is 0.83.
The concentration of the resulting solution in g/L can be calculated by dividing the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.
To further explain this calculation, we must first understand the concepts of mass and volume. Mass is a measure of the amount of matter an object contains. Volume, on the other hand, is the amount of space occupied by a given object. When mixing 538 grams of a substance into 647 ml of water, we are creating a solution with a certain concentration of the substance.
To calculate the concentration of the resulting solution, we must divide the mass of the substance (538 g) by the total volume of the solution (647 ml). This gives us a result of 0.83 g/L.
Know more about mass here:
https://brainly.com/question/14014782
#SPJ11
Pressure (kg/cm²)
1.15
1.24
1.47
Volume (mL)
44.8
41.5
35.0
A student doing this experiment obtained the data
shown in the table above. The value of the
constant, k, for this data is
A. 0.04
B. 25.7
C. 50.0
D. 51.5
The value of the constant, k, for this data is 51.5.
option D.
What is the value of the constant K?To determine the constant k, we can use the formula:
PV = k
where;
P is the pressure in kg/cm², V is the volume in mL, and k is the constant.We can rearrange the formula to solve for k:
k = PV
Now, we can multiply the pressure and volume values for each data point to get the corresponding value of k:
For the first data point: k = 1.15 kg/cm² x 44.8 mL = 51.52
For the second data point: k = 1.24 kg/cm² x 41.5 mL = 51.40
For the third data point: k = 1.47 kg/cm² x 35.0 mL = 51.45
We can take the average of these values to get an overall value for k:
k = (51.52 + 51.40 + 51.45) / 3 = 51.46 ≈ 51.5
Learn more about constant here: https://brainly.com/question/27983400
#SPJ1
true or false. the transfer of energy from one tropic level to the next is very efficient
False: Lindeman's law of trophic efficiency, which says that the efficiency of energy transferred from one trophic level to the next higher trophic level is about 10%, states that the transfer of energy from one trophic level to the next trophic level follows a 10% rule.
Is the efficiency of energy transfer from one trophic group to the next high?Energy transfer between trophic levels is inefficient. Only 10% or so of the net output at one level carries over to the next level. Ecological pyramids are diagrams that show the flow of energy, the accumulation of biomass, and the quantity of organisms at various trophic levels.
Is the efficiency of energy transfer from one trophic group to the next up to 90%?The ten percentile rule is usually used to describe how energy is transferred between trophic groups. 90% of the initial energy from one trophic level to the next is inaccessible because it is used for activities like movement, growth, respiration, and reproduction.
To know more about energy visit:-
https://brainly.com/question/8630757
#SPJ9
A student exposed r-1-bromo-2-propanol to sodium hydroxide, isolated an optically active product, and collected the proton nmr below. what is the structure of the compound that the student isolated?
The student obtained an optically active product after exposing r-1-bromo-2-propanol to sodium hydroxide. The proton NMR of the product is also provided.
The structure of the compound that the student isolated is:CH3 – CH (OH) – CH2 – Br
In the given compound r-1-bromo-2-propanol, the bromine atom is attached to the first carbon atom. When this compound is treated with sodium hydroxide, the hydroxide ion attacks the carbon atom attached to the bromine atom and forms a negatively charged oxygen atom.This negatively charged oxygen atom further attracts the proton of the adjacent carbon atom (second carbon atom). After the transfer of a proton, the negatively charged oxygen atom gets neutralized and an alkoxide ion is formed. This alkoxide ion further attacks the third carbon atom and the compound is formed.In the compound obtained, there is no plane of symmetry or center of symmetry. This makes the compound optically active.
Further, the proton NMR shows the presence of a singlet at chemical shift 1.1 ppm due to the presence of three equivalent methyl groups. The presence of a broad singlet at chemical shift 3.7 ppm is due to the presence of –OH group. The singlet at chemical shift 4.2 ppm is due to the presence of –CH2 group.The structure of the compound that the student isolated is CH3 – CH (OH) – CH2 – Br.
Learn more about optically active products and proton NMR here, https://brainly.com/question/24215073
#SPJ11
in a certain molecule, the central atom has one lone pair and five bonds. what will the electron pair geometry and molecular structure be?
In the certain molecule, the central atom has the one lone pair and five bonds. The electron pair geometry is the square pyramidal and molecular structure is square pyramidal.
The square pyramidal has the 5 bonds and the 1 lone pair. The 1 lone pair will be sits on the bottom of the molecule and that will causes the repulsion of the rest of bonds. This will result in that the bond angles are the all slightly lower than the 90°.
The molecule with the five bonding pairs and the one lone pair is designated as the AX5E and it has the total of the six electron pairs. The electron pair geometry is the square pyramidal and molecular geometry is square pyramidal.
To learn more about geometry here
https://brainly.com/question/28189901
#SPJ4
ka for acetic acid is 1.8x10-5, and ka for hypochlorous acid is 3.5x10-8 at 25 c. if 500 ml of 1.0 m acetic acid was mixed with 500 ml 1.0 m hypochlorous acid, which conjugate base would have the highest concentration? justify your answer.
Acetate, the conjugate base of acetic acid, and hypochlorite, the conjugate base of hypochlorous acid, will have equal amounts.
Is acetate acetic acid's conjugate base?For instance, the conjugate base of the weak acid acetic acid is the acetate ion. In order to create unionized acetic acid and the hydroxide ion, a soluble acetate salt, such as sodium acetate, will release acetate ions into the solution.
Acetic acid and hypochlorous acid will react when combined to produce their conjugate bases:
CH3COOH + HOCl ↔ CH3COO- + HClO
This reaction's equilibrium constant can be written as:
K = [CH3COO-][HClO] / [CH3COOH][HOCl]
[CH3COO-] = [CH3COOH] = 1.0 M
[HClO] = [HOCl] = 1.0 M
By entering these values as replacements in the equilibrium formula, we obtain:
K = (1.0 M) / (1.0 M)
= 1.0
To know more about acetic acid visit:-
https://brainly.com/question/15202177
#SPJ1
dentify which compounds will be UV active. A UV active compound will fluoresce when exposed to a UV lamp. Upon irradiation with UV light, a UV active compound will absorb the energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are part of the UV range. The UV active compounds are: CH2=CH2 CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-CH=CH, CH, =CH-CH=CH
UV active compounds are those that fluoresce when exposed to a UV lamp. Upon exposure to UV light, these compounds absorb energy and promote an electron from the HOMO to the LUMO. Consider which wavelengths are included in the UV range. CH2=CH2, CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, CH2=CH-CH2-
CH=CH, and CH, =CH-CH=CH are all examples of UV active compounds.
The UV active compounds in the given list are CH2=CH-CH=CH-CH=CH, CH2=CH-CH=CH-CH=CH-CH=CH, and CH2=CH-CH2-CH=CH. These compounds will **fluoresce** when exposed to a **UV lamp** and absorb energy to promote an electron from the HOMO to the LUMO.
To determine if a compound is UV active, consider the presence of **chromophores** within the molecule. Chromophores are functional groups that absorb UV light, typically containing conjugated double bonds or aromatic rings. In this case, the first three compounds have conjugated double bonds, making them UV active. The fourth compound, CH=CH-CH=CH, lacks sufficient conjugation to be UV active.
For more similar questions on topic dissociate
brainly.com/question/15321204
#SPJ11
The Quantum Theory Model seems to contradict one the above scientist's hypothesis. Who is it and why? Is there more than one?
Answer:
Multiple scientists, including Albert Einstein, David Bohm, John Bell, and Roger Penrose, have challenged certain aspects of quantum theory due to differing views about particle behavior, hidden variables, and consciousness. Despite the challenges, quantum theory remains widely accepted as one of the most accurate and well-tested frameworks in modern physics.
what will you use to prepare the calibration curve in this project? group of answer choices a solvent blank. a series of solutions with the exact same analyte concentration. a series of solutions with various unknown analyte concentrations. a series of solutions with a range of precisely known analyte concentrations.
A series of solutions with a range of precisely known analyte concentrations. Option D
What is a calibration curve?A calibration curve is a graphical representation of the relationship between the concentration or amount of a substance, and a signal or measurement obtained from an analytical instrument or assay. The calibration curve is constructed by measuring the signal or response of the instrument or assay at different known concentrations or amounts of the substance, and plotting these values on a graph.
The resulting curve is then used to determine the concentration or amount of the substance in an unknown sample by measuring its signal or response and comparing it to the calibration curve.
Learn more about calibration curve:https://brainly.com/question/29729322
#SPJ1
write down a reaction scheme for polymerization of styrene initiated by thermolysis of azobisisobutyronitrile, including both combination and disproportionation as possible modes of termination.
The reaction scheme is as follows:
Styrene (monomer) + Azobisisobutyronitrile (initiator) → Radical polymers + Nitrile groups
Radical polymers then undergo combination or disproportionation as the possible modes of termination:
Combination:
Radical polymers + Radical polymers → Polystyrene (end product)
Disproportionation:
Radical polymers → Polystyrene + Styrene (monomer)
Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.
During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.
These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,
where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.
Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.
This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.
The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.
to know more about styrene refer here:
https://brainly.com/question/14546335#
#SPJ11
what phase change happens when you drop the dry ice into the water
ASAP
Answer:
Sublimation, the dry ice changes to a gas, solid to gas is sublimation
what is the relative rate of diffusion between oxygen gas and carbon dioxide? oxygen gas is x the rate of carbon dioxide
The relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8. Diffusion is the process of spreading out or scattering a substance, particularly molecules that move randomly inside a fluid or gas.
When substances are dispersed, they shift from areas of high concentration to areas of low concentration. The rate of diffusion determines how quickly or slowly a substance will spread. In a gas or liquid, the molecules diffuse more quickly when the temperature is high.
The ratio of two molecules' diffusion rates is known as the relative rate of diffusion. The relative rate of diffusion can be determined using Graham's law of diffusion. According to this law, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight.
The relative rate of diffusion of two gases can be determined using this law.Let's look at oxygen gas and carbon dioxide now. The molecular weight of oxygen gas is 32 g/mol, while that of carbon dioxide is 44 g/mol.
The relative rate of diffusion can be determined using Graham's law of diffusion:
Relative rate of diffusion of oxygen gas:√(44/32)
Relative rate of diffusion of oxygen gas: 1.2
Relative rate of diffusion of carbon dioxide:√(32/44)
Relative rate of diffusion of carbon dioxide: 0.8
Therefore, the relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8.
To know more about rate of diffusion, refer here:
https://brainly.com/question/2010859#
#SPJ11
What happens to molecules once they are eaten by animals
When animals consume food containing large polymeric molecules, such as proteins, carbohydrates, and nucleic acids, their digestive system breaks down these molecules into smaller components that can be absorbed and utilized by the body.
Mechanical digestion occurs in the mouth and stomach, where food is broken down into smaller pieces through chewing and mixing with digestive enzymes and acids. Chemical digestion occurs primarily in the small intestine, where enzymes and other compounds break down complex molecules into smaller components.
Proteins, for example, are broken down into their constituent amino acids by proteases, while carbohydrates are broken down into simple sugars like glucose and fructose by amylases. Nucleic acids are broken down into nucleotides by nucleases.
Once these molecules are broken down, they are absorbed into the bloodstream through the walls of the small intestine and transported to the liver, where they are further metabolized and distributed to other parts of the body as needed. The body then uses these molecules to build new proteins, carbohydrates, and nucleic acids or to generate energy through cellular respiration. Any excess molecules are typically stored for later use or eliminated from the body as waste.
To know more about molecules, here
brainly.com/question/4745152
#SPJ4
--The complete question is, What happens to large polymeric molecules in food once they are eaten by animals?--
match the following terms with the correct definitions. - homogeneous equilibrium - heterogeneous equilibrium - le chatelier's principle - complex ion a. a metal ion bonded to lewis acids. b. an equilibrium involving a catalyst in the same phase as the other species. c. an equilibrium involving a catalyst in a different phase as the other species. d. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state. the reaction proceeds in the direction that-at least partially-offsets the change in conditions. e. an equilibrium involving reactants and products in the same phase. f. a metal ion bonded to lewis bases. g. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, the the reaction adjusts towards a new equilibrium state. the reaction proceeds in the direction that-at least partially-increases the change in conditions. h. none of these
Homogeneous equilibrium: an equilibrium involving reactants and products in the same phase.
Heterogeneous equilibrium: an equilibrium involving a catalyst in a different phase as the other species.
Le Chatelier's Principle: if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state.
The reaction proceeds in the direction that-at least partially-offsets the change in conditions. Complex ion: a metal ion bonded to Lewis acids or Lewis bases.
Homogeneous equilibrium occurs when the reactants and products of a reaction exist in the same phase, either solid, liquid, or gas. Heterogeneous equilibrium happens when the reactants and products are in different phases.
Le Chatelier's Principle states that if a chemical reaction is subjected to a change in conditions, the reaction will adjust towards a new equilibrium state in a way that offsets the change in conditions.
A complex ion is a metal ion bonded to Lewis acids or Lewis bases, which are molecules or ions with an extra pair of electrons that can be donated to other molecules or ions.
To know more about Le Chatelier's Principle click on below link:
https://brainly.com/question/29009512#
#SPJ11
If a body covers 20 m in east direction in 5 Second Calculate the velocity of a body.
v = 20/5
= 4m/s
Velocity equals distance over time.
the second electron affinity values for both oxygen and sulfur are unfavorable (endothermic). explain.
Explanation:
If we look at the definition of the second electron affinity:
The second electron affinity is the enthalpy change when one mole of gaseous 2⁻ ions is formed from one mole of gaseous 1⁻ ions
The equations of the second electron affinity for oxygen and sulfur:
O⁻ (g) + e⁻ → O²⁻ (g)
S⁻ (g) + e⁻ → S²⁻ (g)
This process is endothermic as we are trying to combine an electron with a negative ion, and so we must overcome the repulsion. Applying energy will overcome it.
The second electron affinity is the energy change that occurs when an atom in the gaseous state gains an additional electron.
For both oxygen and sulfur, the second electron affinity values are unfavorable, meaning that the energy change that occurs is endothermic. This means that energy is being absorbed by the atom, and the atom is becoming more stable.
To understand why the second electron affinity values for oxygen and sulfur are unfavorable, it is important to look at the electron configurations of these atoms. Oxygen's electron configuration is 2s22p4, meaning it has 8 electrons in its outermost shell. Sulfur has an electron configuration of 2s22p63s2, meaning it has 16 electrons in its outer shell. Since both of these atoms have a full outer shell of electrons, they are not in need of an additional electron, and therefore do not have a strong tendency to gain one. As a result, it takes a lot of energy for the atom to gain an additional electron, meaning the second electron affinity value is unfavorable (endothermic).
In conclusion, the second electron affinity values for oxygen and sulfur are unfavorable (endothermic) because they already have full outer shells of electrons and do not have a strong tendency to gain an additional electron.
To know more about endothermic reaction click on below link :
https://brainly.com/question/23184814
#SPJ11
Draw the sun and label the 4 layers from middle to the surface.
The layers of the sun can be seen in the image attached.
What are the layers of the sun?The sun is composed of several layers, including:
Core: The innermost layer of the sun where nuclear fusion takes place. The temperature in the core is about 15 million degrees Celsius.
Radiative Zone: This layer is between the core and the convection zone. Energy produced in the core is transported through the radiative zone by photons.
Convection Zone: The outermost layer of the sun's interior where hot gas rises and cooler gas sinks. The energy produced in the core is carried to the surface by convection.
Photosphere: The visible surface of the sun where most of the sun's light is emitted. The temperature of the photosphere is around 5,500 degrees Celsius.
Chromosphere: A thin layer above the photosphere that emits a reddish glow during solar eclipses. The temperature of the chromosphere ranges from 4,000 to 10,000 degrees Celsius.
Corona: The outermost layer of the sun's atmosphere, extending millions of kilometers into space. The temperature of the corona is extremely high, around 1 to 3 million degrees Celsius.
Learn more about the sun:https://brainly.com/question/17376727
#SPJ1
How many reaction schemes involving the alkene should you have in the "Reactions" section of your Pre-lab notebook?
4
1
3
2
In the "Reactions" section of your Pre-lab notebook, you should have two reaction schemes involving the alkene. The correct answer is option d.
The Pre-lab notebook is a collection of worksheets and pre-lab assignments that students must finish before lab. This may include preparing solutions, making graphs, filling out data tables, or writing lab reports.A pre-lab notebook is a place where students may record and evaluate their work before and during a laboratory session. It is a document that is kept by the student and used to help them comprehend the material that is presented to them.
The Pre-lab notebook is divided into three sections: the Procedures section, the Data section, and the Reactions section. An alkene is a hydrocarbon that contains a carbon-carbon double bond. Alkenes are typically unsaturated and highly reactive. Alkenes are used in a variety of industries, including the production of plastics, synthetic rubbers, and fibers. Alkenes are also used as solvents in many applications.
They are known for their ability to react with a variety of other compounds. This will ensure you cover a range of possible reactions and provide a comprehensive understanding of the alkene's behavior in different situations.
To know more about alkene, refer here:
https://brainly.com/question/31033378#
#SPJ11
describe or determine the effect of temperature of temperature on reaction rate and activation energy for a reaction using the arrhenius equation
The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.
The Arrhenius equation is
[tex]k = A e^{-\frac{E_a}{RT}}[/tex]
where:
k is the rate constant is the pre-exponential factor
Ea is the activation energy
R is the gas constant
T is the temperature in Kelvin
According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.
The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.
Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.
To learn more about activation energy refer - brainly.com/question/14776335
#SPJ11
calculate the molarity of a solution made by dissolving 1.25moles of na2cro4 in enough water to form exactly 0.550 l of solution.
2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.
A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.
Molarity = moles of solute/volume of solution in liters
Molarity = 1.25 moles/0.550 L = 2.27 M
To know more about molarity, here:
https://brainly.com/question/31545539
#SPJ12
1.5 mol nacl in 1000 g h2o.how much does the boiling point increaase due to the addition of the salt
The number of grams of NaCl to add to raise the boiling point is:
86.12g.
What is boiling temperature?Also called boiling point. The boiling point of a liquid changes with pressure. The normal boiling point is the temperature at which the vapor pressure equals normal atmospheric pressure at sea level.The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.For this, ΔTb= iKb (mass of NaCl/molecular weight of NaCl×1000/mass of H2O)ΔTb = 1.5, i = 2, Kb = 0.51Molar mass of NaCl = 58.5 g/mol. For this. 1.5=2×0.51 (mass of NaCl/58.5×1000/1000)Mass of NaCl = 86.1 gramsFor more information on boiling temperature kindly visit to
https://brainly.com/question/29722100
#SPJ1
all of these quantities except one must be zero for this constant pressure process at 300k and 1 atm. which quantity is nonzero?
The nonzero quantity is Heat Transfer.
Heat Transfer is the only quantity that must be nonzero for a constant pressure process at 300K and 1 atm. This is because Heat Transfer is the amount of energy that is required to maintain constant pressure.
All other quantities in this process, such as Work, Internal Energy, and Enthalpy, are zero for a constant pressure process at a given temperature and pressure.
Therefore, the quantity that is nonzero for this constant pressure process at 300k and 1 atm is Heat Transfer.
To know more about Heat Transfer, refer here:
https://brainly.com/question/13433948#
#SPJ11
the decay rate for a radioactive isotope is 6.2 percent per year. find the half-life of the isotope. round to the nearest tenth of a year.
The half-life of the isotope is 11.2 years.
The half-life of a radioactive isotope is the time it takes for half of the atoms in a sample to undergo radioactive decay. For a radioactive isotope with a decay rate of 6.2 percent per year, the half-life can be calculated as follows:
Half-life = ln(2) / (decay rate) = ln(2) / 0.062 = 11.2 years (rounded to the nearest tenth)
To understand this calculation in further detail, it is helpful to consider the concept of radioactive decay in terms of probability. After one half-life has elapsed, there is a 50 percent chance that an atom will have decayed, and a 50 percent chance that it will remain undecayed. After two half-lives have elapsed, there is a 75 percent chance that an atom will have decayed, and a 25 percent chance that it will remain undecayed.
This concept can be applied to the equation above, as the probability of decay during a single time interval is equal to the decay rate multiplied by the length of the time interval. By solving this equation, the half-life of a given radioactive isotope can be determined.
Learn more about half-life here: https://brainly.com/question/1160651.
#SPJ11
dilute solutions of acids are commonly prepared by diluting the concentrated commercial stock solutions found in chemistry laboratories. the concentration of stock sulfuric acid is 18.0 m. what volume of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid?
1.27 l of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid.
To make a 0.750 m solution of sulfuric acid, you need to dilute 18.0 m stock sulfuric acid with water to 1.50 l.
To make a 0.750 m solution of sulfuric acid, you need to start with 18.0 m stock sulfuric acid and dilute it with water to 1.50 l.
You can use the formula C1V1 = C2V2 to determine the volume of stock sulfuric acid needed. C1 represents the concentration of stock sulfuric acid (18.0 m), V1 represents the volume of stock sulfuric acid (unknown), C2 represents the concentration of the desired solution (0.750 m), and V2 represents the volume of the desired solution (1.50 l).
Plugging in the given values, you get (18.0 m)(V1) = (0.750 m)(1.50 l). Solving for V1, you get V1 = 1.27 l. Therefore, you need 1.27 l of stock sulfuric acid to make a 0.750 m solution of sulfuric acid with a total volume of 1.50 l.
To know more about sulfuric acid click on below link:
https://brainly.com/question/30039513#
#SPJ11
calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.
The number of moles of sodium hydroxide present in the sample, is 0.00839 moles.
To calculate the number of moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution, use the following equation:
Moles = concentration (M) x volume (L)
Moles = 0.315 M x 0.02680 L
Moles = 0.00839 moles of sodium hydroxide present in a 26.80 ml sample of a 0.315 m solution.
To explain this in further detail, moles are a unit of measurement for an amount of substance and are typically expressed as mol. A mole is equal to 6.02 x 10^23 atoms or molecules, and is represented by the letter 'n' or 'N'.
The concentration of a solution is a measure of the amount of solute dissolved in a given volume of solvent and is expressed in molarity (M). Volume is expressed in litres (L).
By multiplying the concentration of a solution (0.315 M) by the volume of the sample (0.02680 L).
Sodium hydroxide, also known as lye, is a highly reactive and caustic inorganic compound. It is commonly used in soap and detergent production, as well as in the paper and textile industries.
It is also used in the production of a variety of other chemicals, including pharmaceuticals and food additives.
To know more about Sodium hydroxide refer here:
https://brainly.com/question/29327783#
#SPJ11
the electrolyte in automobile lead storage batteries is a 3.75 m sulfuric acid solution that has a density of 1.230 g/ml. calculate the mass percent, molality, and normality of the sulfuric acid.
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.
To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.
Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446
#SPJ11
what is the ph of a solution if 10 ml of a 1 m hcl solution is added to 10 ml of a 1 m naoh solution?
The pH of a solution if 10 ml of a 1 M HCl solution is added to 10 ml of a 1 M NaOH solution can be calculated as follows:
First, let's find the number of moles of HCl and NaOH in the solution. Number of moles of HCl = Concentration of HCl x Volume of HClNumber of moles of HCl = 1 M x (10 ml/1000 ml)Number of moles of HCl = 0.01 molesNumber of moles of NaOH = Concentration of NaOH x Volume of NaOHNumber of moles of NaOH = 1 M x (10 ml/1000 ml)Number of moles of NaOH = 0.01 molesNext, let's find the net number of moles of H+ and OH- ions.Number of moles of H+ ions = Number of moles of NaOH - Number of moles of HCl.Number of moles of H+ ions = 0.01 - 0.01Number of moles of H+ ions = 0 molesNumber of moles of OH- ions = Number of moles of HCl - Number of moles of NaOHNumber of moles of OH- ions = 0.01 - 0.01Number of moles of OH- ions = 0 molesSince the net number of moles of H+ ions and OH- ions is zero, the solution is neutral. The pH of a neutral solution is 7. Therefore, the pH of the solution is 7.
To know more about pH click on below link :
https://brainly.com/question/491373#
#SPJ11
there are three mechanistic steps of an aldol addition reaction: (1) deprotonation, (2) nucleophilic attack, (3) protonation.
The aldol reaction involves the reaction of an aldehyde or ketone with an enolate ion to form a β-hydroxyaldehyde or β-hydroxyketone, followed by a dehydration to form a double bond.
The aldol reaction is an important organic reaction in the formation of new carbon–carbon bonds. The reaction is named after the aldol reaction product, which contains both aldehyde and alcohol groups.
The aldol addition reaction has three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation. These steps are explained below:
(1) Deprotonation: In the first step of the aldol reaction, the base removes a proton from the α-carbon of the carbonyl compound, which leads to the formation of the enolate ion.
The enolate ion is a resonance-stabilized anion that contains a negative charge on the oxygen atom and a double bond between the carbon and oxygen atoms.
(2) Nucleophilic attack: In the second step of the aldol reaction, the enolate ion acts as a nucleophile and attacks the carbonyl group of another molecule of the aldehyde or ketone.
This leads to the formation of a β-hydroxyaldehyde or β-hydroxyketone intermediate.
(3) Protonation: In the final step of the aldol reaction, the β-hydroxyaldehyde or β-hydroxyketone intermediate is protonated by the acid.
This leads to the formation of the aldol addition product, which contains a new carbon–carbon bond.
Thus, the aldol addition reaction involves three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation.
These steps are essential for the formation of the aldol addition product, which contains a new carbon–carbon bond.
The aldol reaction is an important organic reaction that is widely used in the synthesis of natural products and pharmaceuticals.
to know more about aldehyde refer here:
https://brainly.com/question/30722723#
#SPJ11
calculate the volume (in ml) of 2.230 m sucrose containing 0.7718 moles sucrose. include units in your answer.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose can be calculated using the following equation:
Volume (ml) = (Molarity (m) x Volume (L)) / Moles (mol)
Therefore, Volume (ml) = (2.230 m x 1L) / 0.7718 mol
Volume (ml) = 2.922 ml
The volume of 2.230 m sucrose containing 0.7718 moles sucrose, the molarity of sucrose needs to be known. Molarity is the amount of a solute that is present in one liter of a solution.
Molarity is typically expressed in terms of moles per liter (m). To calculate the volume, the equation (Molarity x Volume) / Moles is used. In this equation, Molarity is 2.230 m, Volume is 1L, and Moles is 0.7718 mol.
When these values are plugged into the equation, the resulting volume is 2.922 ml.
The volume of 2.230 m sucrose containing 0.7718 moles sucrose is 2.922 ml.
to know more about sucrose refer here:
https://brainly.com/question/29186350#
#SPJ11
while calculating the mass for chloride a student comes up with a negative number. .what is most likely the reason for this error, assuming they did the math correctly
While calculating the mass for chloride, a student comes up with a negative number. The most likely the reason for this error, assuming they did the math correctly is that the student has used the wrong sign for the charge of the chloride ion.
Chloride is an anion, and its charge is negative, but the student may have used a positive sign while calculating it. For instance, the student may have assumed that the chloride ion has a charge of +1 instead of -1, which would have led to the negative mass value.
Besides that, there is no other reason for a negative mass value. The mass of a compound, such as chloride, is always positive and should not be negative at any time. Thus, it can be assumed that the student has made a mistake while assigning the sign for the charge of the chloride ion. However, it is essential to double-check the calculations to ensure that there are no other errors or mistakes in the calculations. Additionally, it is recommended to consult a teacher or a tutor for guidance in case of any confusion while calculating the mass of an ion or a compound.
Learn more about anion at:
https://brainly.com/question/14929591
#SPJ11