10. The time between arrivals for customers at an ATM is exponentially distributed with a mean (B) of ten minutes. What is the probability that the next customer arrives in less than four minutes? (10 points) 11. At a certain large university, 30% of the students are over 21 years of age. In a sample of 600 students, what is the probability that more than 190 of them are over 21? (Hint: use the Normal approximation of the Binomial distribution). (10 points)

Answer:

S = -5/n + 55

Step-by-step explanation:

If Sn = 55n - 5

then subtract 55n from both sides.

Sn - 55n = -5

factor n out on the left side.

n(S - 55) = -5

Divide both sides by n. This means that n cannot be zero.

S - 55 = -5/n

Add 55 to both sides.

S = -5/n + 55

(Be certain that the -5/n is a fraction and the 55 is added on to it. The 55 is NOT on the bottom of the fraction.)

We cannot determine the center or radius of the circle based on the given information.

To find the radius of the circle passing through the point (7, 6), we need to determine the center of the circle.

Let's assume that the center of the circle is (a, b). Since the circle passes through point (7, 6), we can set up an equation using the distance formula between the center (a, b) and point (7, 6) as follows:

√((7 - a)² + (6 - b)²) = r

where r is the radius of the circle.

We can see that this equation represents the distance between the center of the circle and the point (7, 6) is equal to the radius of the circle.

We also know that the distance between the center of the circle and any point on the circle is equal to the radius. Therefore, if we can find the distance between (a, b) and another point on the circle, we can solve for the radius.

However, we do not have any other information about the circle, such as another point or the equation of the circle. Therefore, we cannot determine the center or radius of the circle based on the given information.

Learn more about radius

brainly.com/question/13449316

#SPJ11

The elements of sets A A = {x € Z | x = 5a + 2, for some integer a} and B = {y € Zly = 10b – 3, for some integer b}  3 ∈ A, -8 ∈ A,  -8 ∈ B

The elements of sets A and B and their relationships, we can examine the given definitions:

A = {x ∈ Z | x = 5a + 2, for some integer a}

B = {y ∈ Z | y = 10b - 3, for some integer b}

a) Let's evaluate whether certain elements belong to sets A and B:

3 ∈ A

To check if 3 belongs to A, we need to find an integer value a such that 5a + 2 = 3. Solving this equation, we get a = 0. Therefore, 3 ∈ A.

-8 ∈ A

Similarly, we need to find an integer value a such that 5a + 2 = -8. Solving this equation, we get a = -2. Therefore, -8 ∈ A.

-8 ∈ B

We need to find an integer value b such that 10b - 3 = -8. Solving this equation, we get b = -1. Therefore, -8 ∈ B.

b) To disprove that A ⊆ B, we need to find a counterexample where an element of A is not an element of B.

Consider the element x = 2. We can find an integer value a such that 5a + 2 = 2, which leads to a = 0. Therefore, 2 ∈ A. However, there is no integer value b that satisfies 10b - 3 = 2. Thus, 2 ∉ B.

c) To prove that B ⊆ A, we need to show that every element of B is also an element of A.

Let y be an arbitrary element of B. We can express y as y = 10b - 3 for some integer b. Now we can rewrite this equation as y = 5(2b) + 2. Letting a = 2b, we have expressed y in the form 5a + 2. Therefore, y ∈ A.

Hence, we have shown that B ⊆ A.

To know more about elements click here :

https://brainly.com/question/29152298

#SPJ4

The objective function can be written as q = x^2(22 - x) or q = (22 - y)^2y, depending on whether you express it in terms of x or y, respectively.

To write the objective function q = x^2y in terms of x, we can substitute the value of y from the constraint equation x + y = 22.

Given x + y = 22, we can solve for y as y = 22 - x.

Substituting this value of y into the objective function q = x^2y, we get:

q = x^2(22 - x)

To write the objective function in terms of y, we can solve the constraint equation for x as x = 22 - y.

Substituting this value of x into the objective function q = x^2y, we get:

q = (22 - y)^2y

So, the objective function can be written as q = x^2(22 - x) or q = (22 - y)^2y, depending on whether you express it in terms of x or y, respectively.

To learn more about objective function, refer:-

brainly.com/question/29185392

#SPJ11

the given series converges.

Given the series is

[tex]∑ (-1)^(n+1) [(n^3+1)^0.5]/n^(2/1).[/tex]

To test the convergence of the given series, we can use the Alternating Series Test (Leibniz Test).According to the Alternating Series Test, if an alternating series is decreasing and the limit of its nth term is 0, then the series converges. In other words, the series converges if its terms eventually decrease to zero and they do so sufficiently quickly. In this case, the nth term is given by

[tex]a_n= [(n^3+1)^0.5]/n^(2/1).[/tex]

Thus, let us calculate the limit of a_n as n approaches infinity:

[tex]lim_(n → ∞) [ (n^3+1)^0.5 ]/n^(2/1)lim_(n → ∞) [ (n^(3/2)(1+1/n^3))^0.5 ]/n^(2/1)lim_(n → ∞) [ (n^(3/2))((1+1/n^3)^0.5) ]/n^(2/1)lim_(n → ∞) [(n^(3/2))]/n^(2/1)lim_(n → ∞) n^(1/2)[/tex]

= ∞ .

Hence, as the limit of the nth term does not exist or is infinite, the Alternating Series Test is inconclusive and does not apply. We need to use another convergence test.

Let us apply the Limit Comparison Test: we compare the given series to another series whose convergence/divergence is known, and take the limit of their ratio as n approaches infinity, and if it is a finite, non-zero value, then both the series converge or diverge simultaneously. Let's choose the series

b_n= 1/n^(2/1), [tex]b_n= 1/n^(2/1),[/tex]

which is a p-series with p=2 and is known to converge.

Let us calculate the limit of the ratio of the nth terms of both series:

[tex]lim_(n → ∞) [ { (n^3+1)^0.5 } / n^(2/1) ] / (1/n^(2/1))lim_(n → ∞) [ (n^3+1)^0.5[/tex]Therefore, as the limit exists and is a non-zero value (in fact, it is infinity), the two series converge or diverge simultaneously. Since the series b_n converges, the given series also converges.Therefore, the given series is convergent.

To know more about series visit;

brainly.com/question/12707471

#SPJ11

The logical interpretations are "JV ~ (F.U)": It is not the case that JetBlue buys planes unless Frontier improves service and United lowers fares. "JV ~(F V U)": It is not the case that JetBlue buys planes unless Frontier improves service or United lowers fares. "JV(~FV ~U)": JetBlue buys planes unless Frontier does not improve service and United does not lower fares.

The logical interpretation of the statement "JetBlue buys planes unless neither Frontier improves service nor United lowers fares" can be understood as follows: JetBlue will purchase planes unless both Frontier fails to improve service and United fails to lower fares. In other words, JetBlue will buy planes unless at least one of these conditions is met: Frontier improves service or United lowers fares.

Let's examine the given symbolic expressions and their interpretations:

"JV ~ (F.U)": This expression represents "JetBlue buys planes unless Frontier improves service and United lowers fares." The tilde (~) symbol denotes negation, so the expression reads as "It is not the case that JetBlue buys planes unless Frontier improves service and United lowers fares." In this case, both conditions must be true for JetBlue to refrain from buying planes.

"JV (F V U)": Here, the symbol "V" represents the logical OR operator. So, the expression can be interpreted as "JetBlue buys planes unless Frontier improves service or United lowers fares." The tilde () symbol negates the entire expression, so it becomes "It is not the case that JetBlue buys planes unless Frontier improves service or United lowers fares." In this case, if either Frontier improves service or United lowers fares, JetBlue will not buy planes.

"JV(~FV U)": The tilde () symbol applies to each condition separately, negating them. Therefore, the expression can be understood as "JetBlue buys planes unless Frontier does not improve service and United does not lower fares." In other words, JetBlue will purchase planes unless both Frontier fails to improve service and United fails to lower fares.

In summary, the logical interpretations of the given symbolic expressions are:

"JV ~ (F.U)": It is not the case that JetBlue buys planes unless Frontier improves service and United lowers fares.

"JV ~(F V U)": It is not the case that JetBlue buys planes unless Frontier improves service or United lowers fares.

"JV(~FV ~U)": JetBlue buys planes unless Frontier does not improve service and United does not lower fares.

Learn more about United lowers here

https://brainly.com/question/31980231

#SPJ11

What is the logical interpretation of the statements "JetBlue buys planes unless neither Frontier improves service nor United lowers fares" and the given symbolic expressions "JV ~ (F.U)," "JV ~(F V U)," and "JV(~FV ~U)"?

The absolute extrema of f(x, y) = x²y subject to x² + y² = 1 is (-1, 1).

It is given that :

It is needed to find the absolute extrema of the function f(x, y) = x²y subject to x² + y² = 1.

Since the subjected function is x² + y² = 1, the defined interval is [-1, 1].

Now, consider,

f(x, y) = x²y

f_x(x, y) = 2xy

f_y(x, y) = x²

Letting both of these equal 0,

2xy = 0 and x² = 0

The critical point is (0, 0).

f(0, 0) = 0

f(1, -1) = (1)²(-1) = -1

f(-1, 1) = (-1)²(1) = 1

The absolute maximum point is at (-1, 1).

Learn more about Absolute Maximum Points here :

https://brainly.com/question/20389673

#SPJ4

Lisa was exerting the force at an angle of 41.41 degrees.

The formula given to calculate the work done, W = Fd cosθ, involves the force F, the displacement d, and the angle θ between the force and the displacement. We are given that Lisa does 1500 joules of work (W), exerts a force of 100 newtons (F), and moves the object through a displacement of 20 meters (d). We need to find the angle θ.

Rearranging the formula, we have:

W = Fd cosθ

Substituting the known values, we get:

1500 = 100 * 20 * cosθ

Simplifying, we have:

1500 = 2000 * cosθ

Dividing both sides by 2000, we find:

0.75 = cosθ

To find the angle θ, we need to take the inverse cosine (cos⁻¹) of 0.75. Using a calculator or a trigonometric table, we find that the angle whose cosine is 0.75 is approximately 41.41 degrees.

Therefore, Lisa was exerting the force at an angle of approximately 41.41 degrees.

This means that the force she exerted was not directly aligned with the displacement, but rather at an angle of 41.41 degrees to it. The cosine of the angle determines the component of the force in the direction of the displacement. In this case, the cosine of 41.41 degrees is 0.75, indicating that 75% of the force was aligned with the displacement, resulting in the given amount of work.

Know more about work done here:

https://brainly.com/question/28356414

#SPJ11

The series given has a radius of convergence (R) equal to 1 and an interval of convergence (I) from 1 to 3.

1. Radius of convergence (R): In this case, the radius of convergence is given as R = 1. The formula for the radius of convergence is R = 1 / lim sup (|a_n|^(1/n)), where a_n represents the coefficients of the series.

2. To find the radius of convergence, we need to compute the limit superior of the absolute values of the coefficients raised to the power of 1/n. In this series, the coefficients are given by (-1)^n and (x-2)^n/4n+1.

3. Computing the limit superior: Taking the absolute value of the coefficients, we have |(-1)^n (x-2)^n/4n+1| = |x-2|^n/(4n+1). Taking the limit superior of this expression as n approaches infinity, we find that it is equal to 1 when |x-2| = 1.

4. Interval of convergence (I): The interval of convergence is determined by the range of x values for which the series converges. In this case, the series converges when |x-2| < 1. Therefore, the interval of convergence (I) is [1, 3], where 1 is included and 3 is excluded due to the strict inequality.

Learn more about convergence :  brainly.com/question/29258536

#SPJ11

the second partial derivatives are:

w_uu = 72u²7 × v²5

w_uv = 45u²8 × v²4

w_vu = 45u²8 × v²4

w_vv = 20u²9 × v²3

To find the second partial derivatives of w with respect to u and v, we need to differentiate the given   with respect to u and v twice.

Given:

w = u²9 × v²5

First, let's find the first partial derivatives:

w_u = 9u²8 × v²5

w_v = 5u²9 × v²4

Now, let's find the second partial derivatives:

w_uu = (w_u)_u = (9u²8 × v²5)_u = 72u²7 × v²5

w_uv = (w_u)_v = (9u²8 × v²5)_v = 45u²8 × v²4

w_vu = (w_v)_u = (5u²9 × v²4)_u = 45u²8 × v²4

w_vv = (w_v)_v = (5u²9 × v²4)_v = 20u²9 × v²3

Therefore, the second partial derivatives are:

w_uu = 72u²7 × v²5

w_uv = 45u²8 × v²4

w_vu = 45u²8 × v²4

w_vv = 20u²9 × v²3

To know more about  Partial Derivatives related question visit:

https://brainly.com/question/28751547

#SPJ11

There are 240 possible arrangements of students A, B, C, D, E, F if CF have to be together.

If CF have to be together, we can consider them as a single entity. So, we have 5 entities to arrange: A, B, C, D, EF.

Since there are 5 entities, we can arrange them in 5! (5 factorial) ways.

However, within the EF entity, there are 2 different arrangements: EF or FE. So, we need to multiply the total number of arrangements by 2.

Therefore, the total number of arrangements is 5! × 2 = 120 × 2 = 240.

Thus, there are 240 possible arrangements of students A, B, C, D, E, F if CF have to be together.

More on permutations can be found here: https://brainly.com/question/29990226

#SPJ4

if A has a row of zeros (or a column of zeros), A cannot have an inverse.

If matrix A has a row of zeros (or a column of zeros), then A cannot have an inverse, we can use the concept of determinant.

If A is an invertible matrix, it means that A has an inverse, denoted as A⁻¹. The inverse of A is defined such that when A is multiplied by its inverse, the result is the identity matrix I:

A × A⁻¹ = I

However, the determinant of a matrix can provide information about whether it is invertible or not. Specifically, if the determinant of a matrix is zero, the matrix is said to be singular or non-invertible.

Now, let's assume that A is a matrix with a row of zeros (or a column of zeros). Without loss of generality, let's consider the case where A has a row of zeros.

If A has a row of zeros, then the determinant of A, denoted as det(A), will also be zero. This is because when calculating the determinant of a matrix, we expand along a row or column, and if that row or column contains all zeros, the determinant will evaluate to zero.

Since det(A) = 0, it implies that A is a singular matrix and does not have an inverse. If it had an inverse, the product of A and its inverse would be the identity matrix, but since A is not invertible, this is not possible.

Hence, if A has a row of zeros (or a column of zeros), A cannot have an inverse.

To know more about matrix click here :

https://brainly.com/question/32385406

#SPJ4

The statement is true. If event A is the complement of event B, it means that A and B are mutually exclusive or disjoint. Additionally, the sum of their probabilities is equal to 1, as P(A) + P(B) = 1.

When event A is the complement of event B, it means that A includes all outcomes that are not in B, and vice versa. In other words, if an outcome belongs to A, it cannot belong to B, and vice versa. Therefore, A and B are disjoint or mutually exclusive. Furthermore, the sum of the probabilities of A and B should cover the entire sample space since they are complements of each other. The probability of the sample space is 1. Therefore, P(A) + P(B) = 1.

To know more about mutually exclusive,

https://brainly.com/question/30748444

#SPJ11

The statement is true. If x represents a random variable following a normal distribution and the probability that x is less than 5.3 is 0.79, then the probability that x is greater than 5.3 is indeed 0.21.

In a normal distribution, the area under the curve represents the probabilities of different events occurring. The total area under the curve is equal to 1 or 100%.

Since the probability of x being less than 5.3 is given as 0.79, this means that the area under the curve to the left of 5.3 is 0.79 or 79%.

Since the total area under the curve is 1, the remaining area to the right of 5.3 is 1 - 0.79 = 0.21 or 21%. Therefore, the probability that x is greater than 5.3 is indeed 0.21.

Learn more about Probability:

brainly.com/question/32117953

#SPJ11

The value of the line integral ∫C F⋅dr, where F(x, y, z) = -xi - 2yj - 2zk and C is given by the vector function r(t) = <sin(t), cos(t), t>, 0 < t < 3π/2, is -2/3 - (9π²/4).

To evaluate the line integral ∫C F⋅dr, we need to substitute the given vector function r(t) = <sin(t), cos(t), t> into the vector field F(x, y, z) = -xi - 2yj - 2zk and then calculate the dot product and integrate with respect to t over the given interval.

First, let's find the derivative of r(t) with respect to t:

r'(t) = <cos(t), -sin(t), 1>

Now, we can substitute the values into the dot product:

F⋅dr = (-xi - 2yj - 2zk) ⋅ (cos(t)dx - sin(t)dy + dt)

= -x cos(t) dx - 2y (-sin(t)) dy - 2z dt

= -x cos(t) dx + 2y sin(t) dy - 2z dt

To evaluate the integral, we need to express dx, dy, and dt in terms of dt only. From the given vector function r(t), we have:

dx = cos(t) dt

dy = -sin(t) dt

dt = dt

Substituting these values into the expression for F⋅dr, we get:

F⋅dr = -x cos(t) (cos(t) dt) + 2y sin(t) (-sin(t) dt) - 2z dt

= -x cos²(t) dt - 2y sin²(t) dt - 2z dt

Now, we can integrate the expression over the given interval 0 < t < 3π/2:

∫C F⋅dr = ∫(0 to 3π/2) [-x cos²(t) dt - 2y sin²(t) dt - 2z dt]

To evaluate this integral, we need to substitute the values of x, y, and z from the vector function r(t):

∫C F⋅dr = ∫(0 to 3π/2) [-(sin(t)) cos²(t) dt - 2(cos(t)) sin²(t) dt - 2t dt]

Integrating term by term, we have:

∫C F⋅dr = ∫(0 to 3π/2) [-sin(t) cos²(t) dt] - ∫(0 to 3π/2) [2(cos(t)) sin²(t) dt] - ∫(0 to 3π/2) [2t dt]

Integrating each term individually, we get:

∫C F⋅dr = [-1/3 cos³(t)](0 to 3π/2) - [-(2/3) cos³(t)](0 to 3π/2) - [t²](0 to 3π/2)

Evaluating each term at the upper limit (3π/2) and subtracting the value at the lower limit (0), we have:

∫C F⋅dr = [-1/3 cos³(3π/2)] - [-1/3 cos³(0)] - [-(2/3) cos³(3π/2)] + [-(2/3) cos³(0)] - [(3π/2)²]

Simplifying, we get:

∫C F⋅dr = [-1/3] - [-1/3] - [-(2/3)] + [-(2/3)] - [(9π²/4)]

= -2/3 - (9π²/4)

To know more about integral:

https://brainly.com/question/31433890

#SPJ4

Answer:

C

Step-by-step explanation:

Perimeter = 2( l + b)

                  = 2 ( x^2 + 8 + x^2 + 6x - 3 )

                 =  2 ( 2x^2 + 6x + 5 )

                  =   4x^2 + 12x + 10

P(X ≥ 200) = 1 - P(X < 200) ≈ 1.0. In other words, it is very likely (almost certain) that at least 200 out of 210 college graduates under age 20 are employed.

To find the probability that at least 200 out of 210 college graduates under age 20 are employed, we can use the binomial distribution formula:
P(X ≥ 200) = 1 - P(X < 200)
where X is the number of employed college graduates under age 20 out of a sample of 210.
We know that the unemployment rate for college graduates under the age of 20 is 7%. Therefore, the probability of an individual college graduate being unemployed is 0.07.
To find the probability of X employed college graduates out of 210, we can use the binomial distribution formula:
P(X = k) = (n choose k) * p^k * (1-p)^(n-k)
where n is the sample size (210), k is the number of employed college graduates, and p is the probability of an individual college graduate being employed (1-0.07=0.93).
We want to find P(X < 200), which is the same as finding P(X ≤ 199). We can use the cumulative binomial distribution function on a calculator or software to find this probability:
P(X ≤ 199) = 0.000000000000000000000000000001004 (very small)
Therefore, P(X ≥ 200) = 1 - P(X < 200) ≈ 1.0. In other words, it is very likely (almost certain) that at least 200 out of 210 college graduates under age 20 are employed.

To know more about probability visit:

https://brainly.com/question/31120123

#SPJ11

The augmented coefficient matrix for the given system of equations is:

[4 2 1 | 11]

[-1 2 0 | A]

[2 1 4 | 16]

Using the Gauss-Jordan reduction method, we can perform row operations to transform the matrix into reduced echelon form. The goal is to create zeros below the main diagonal and ones on the main diagonal.

First, we can perform the row operation R2 = R2 + (1/4)R1 to eliminate the -1 coefficient in the second row. The updated matrix becomes:

[4 2 1 | 11]

[0 2.5 0.25 | (11 + A)/4]

[2 1 4 | 16]

Next, we can perform the row operation R3 = R3 - (1/2)R1 to eliminate the 2 coefficient in the third row. The updated matrix becomes:

[4 2 1 | 11]

[0 2.5 0.25 | (11 + A)/4]

[0 -1 3 | 5]

Then, we can perform the row operation R2 = R2 + (2/5)R3 to eliminate the -1 coefficient in the second row. The updated matrix becomes:

[4 2 1 | 11]

[0 0 13/5 | (21 + 2A)/10]

[0 -1 3 | 5]

Finally, we can perform the row operation R3 = R3 + R2 to eliminate the -1 coefficient in the third row. The updated matrix becomes:

[4 2 1 | 11]

[0 0 13/5 | (21 + 2A)/10]

[0 0 8/5 | (31 + 2A)/10]

The reduced echelon form of the augmented matrix reveals that the system of equations is consistent and has a unique solution. Now, we can identify the value of A. From the third row, we have (8/5)z = (31 + 2A)/10. To solve for z, we multiply both sides by 10/8, resulting in z = (31 + 2A)/8. Since the system has a unique solution, we can substitute this value of z back into the second row to find y. Similarly, we substitute z and y into the first row to solve for x.

Learn more about augmented matrix here: brainly.com/question/30403694

#SPJ11

a) The differential equation is [tex]d^{2}[/tex]s/d[tex]t^{2}[/tex] = -9.8 (SI) or -32 (US). b) The position function s(t) = C1t + 400 c) We cannot determine the exact position after 3.5 seconds.

a) To write a differential equation to describe the rate of change of the position of the object, we can use Newton's second law of motion. The law states that the force acting on an object is equal to its mass multiplied by its acceleration. In this case, the only force acting on the object is gravity, which causes it to accelerate downward at a constant rate.

Let's denote the position of the object at time t as s(t), and its acceleration as a. The differential equation can be written as:

[tex]d^{2}[/tex]s/d[tex]t^{2}[/tex]  = a.

Since we know that the acceleration is constant and equal to -9.8 m/[tex]s^{2}[/tex] in the SI system or -32 ft/[tex]s^{2}[/tex] in the US system, the differential equation becomes:

[tex]d^{2}[/tex]s/d[tex]t^{2}[/tex]  = -9.8 (SI) or -32 (US).

b) To solve the differential equation and find the position of the object at any time t when it is dropped with zero velocity from a 400-foot-tall building, we need to integrate the equation twice.

First, we integrate once with respect to time:

ds/dt = v(t) + C1,

where v(t) is the velocity of the object and C1 is the constant of integration.

Next, we integrate again with respect to time:

s(t) = ∫(v(t) + C1) dt + C2,

where C2 is the constant of integration representing the initial position.

Since the object is dropped with zero velocity, the initial velocity v(0) = 0. Therefore, the equation becomes:

s(t) = ∫(0 + C1) dt + C2,

s(t) = C1t + C2.

To find the constants C1 and C2, we can use the initial condition s(0) = 400 ft (the initial position is 400 feet above the ground).

When t = 0, s(0) = C2 = 400 ft.

Therefore, the position function becomes:

s(t) = C1t + 400.

c) To find the position of the object after 3.5 seconds, we substitute t = 3.5 into the position function:

s(3.5) = C1(3.5) + 400.

To determine C1, we need additional information or initial conditions, such as the initial velocity. Without that information, we cannot determine the exact position after 3.5 seconds.

To learn more about differential equation here:

https://brainly.com/question/25731911

#SPJ4

Given statement :- 5y = 8x does not represent direct variation.

K= the coefficient is 8/5 instead of a single constant value.

In the equation 5y = 8x, we can determine whether it represents direct variation by comparing it to the general form of a direct variation equation: y = kx, where k is the constant of variation.

If we rewrite the given equation in the form y = kx, we divide both sides by 5 to isolate y:

y = (8/5)x

Comparing this to the general form, we can see that the given equation is not in the direct variation form. In a direct variation equation, the coefficient of x (the constant of variation, k) should remain constant, but in this case, the coefficient is 8/5 instead of a single constant value.

Therefore, the given equation does not represent direct variation.

For such more questions on direct variation.

https://brainly.com/question/30433335

#SPJ11

Since the set S satisfies all three conditions (closure under addition, closure under scalar multiplication, and contains the zero vector), we can conclude that S is a subspace of P2.

To determine whether the set S = {p(t) = a bt^2 : a, b ∈ R} is a subspace of P2, we need to check if it satisfies three conditions: closure under addition, closure under scalar multiplication, and contains the zero vector.

Closure under addition: Suppose p1(t) = a1 b1 t^2 and p2(t) = a2 b2 t^2 are two arbitrary elements in S, where a1, a2, b1, b2 ∈ R. We need to show that p1(t) + p2(t) is also in S. We have:

p1(t) + p2(t) = a1 b1 t^2 + a2 b2 t^2 = (a1 b1 + a2 b2) t^2

Since a1 b1 + a2 b2 is a real number, we can write it as a3 b3, where a3 = a1 b1 + a2 b2 and b3 = 1. Therefore, p1(t) + p2(t) is in S, and closure under addition is satisfied.

Closure under scalar multiplication: Suppose p(t) = a b t^2 is an arbitrary element in S, where a, b ∈ R, and c is a scalar. We need to show that c * p(t) is also in S. We have:

c * p(t) = c * (a b t^2) = (c * a) b t^2

Since c * a is a real number, we can write it as a4, where a4 = c * a. Therefore, c * p(t) is in S, and closure under scalar multiplication is satisfied.

Contains the zero vector: The zero vector in P2 is the polynomial p(t) = 0t^2 = 0. We can see that 0 is a real number, so it can be written as a5 b5, where a5 = 0 and b5 = 1. Therefore, the zero vector is in S.

To know more about polynomial visit:

brainly.com/question/11536910

#SPJ11

a) Using the principles of a normal distribution, the percentage of data that lies between 7 and 16 is 95%.

b) The two numbers that 68% of the data lie between are 7 and 10.

c) The percentage of numbers that are larger than 13 is 32%.

A normal distribution is a probability distribution where the values of a random variable show a symmetrical distribution.

A symmetrical distribution implies that the values are equally distributed on the left and right side of the central tendency.

This symmetrical relationship means that a bell-shaped curve is formed.

The mean of the normal distribution = 10

The standard deviation = 3

z = (x - μ) / σ

Where:

z = the z-score

x = the value

μ = the mean

σ = the standard deviation.

For x = 7:

z = (7 - 10) / 3

z = -1

This means that 7 is one standard deviation below the mean.

For x = 16:

z = (16 - 10) / 3

z = 2

This means that 16 is two standard deviations above the mean.

Using the empirical rule, about 68% of the data falls within one standard deviation of the mean, and about 95% of the data falls within two standard deviations of the mean.

The percentage of data that lies between 7 and 16 is 95% (100% - 5%)

b) Mean = 10

Standard deviation = 3

A number below = 7 (10 - 3)

A number above = 13 (10 + 3)

Thus, 68% of the data lie between 7 and 13.

c) The percentage of numbers that are larger than 13, using the z-score formula to find how many standard deviations away from the mean is 13.

z = (x - μ) / σ

For x = 13:

z = (13 - 10) / 3

z = 1

This means that 13 is one standard deviation above the mean.

The empirical rule says that about 68% of the numbers fall within one standard deviation of the mean, and about 95% of the numbers fall within two standard deviations of the mean.

The percentage of numbers that are larger than 13 = 32% (100% - 68%).

Learn more about normal distributions at https://brainly.com/question/4079902.

#SPJ1

Therefore, the geometric average of -12%, 20%, and 35% is approximately 11.37%.  

To find the geometric average of -12%, 20%, and 35%, we need to multiply them together and take the cube root of the result (since there are three numbers being multiplied).

So, the calculation would be:

(1 - 0.12) x (1 + 0.20) x (1 + 0.35) = 0.88 x 1.20 x 1.35 = 1.40448

Taking the cube root of this number gives us:

∛1.40448 ≈ 1.1137

Therefore, the geometric average of -12%, 20%, and 35% is approximately 11.37%.

Learn More about geometric here

https://brainly.in/question/1230101

#SPJ11

The value of x for the given cone is 20 units.

Given that,

For a right circular cone,

Volume = 240π unit³

Radius = 6 unit

And height  = x

We have to calculate the value of x

Since we know that,

Volume of right of cone = πr²h/3

Here r = 6

Therefore,

⇒     240π = π 6²x/3

⇒            x = 20 unit,

Hence the height of the cone is 20 units.

To learn more about cone visit:

https://brainly.com/question/30253224

#SPJ1

The missing figure for this question attached below:

The value of the double integral is -3/2. To evaluate this double integral, we can use a change of variables to simplify the integrand and make the bounds of integration easier to work with.

Let's define u = x + y and v = y. Then the Jacobian of this transformation is:

|du/dx  du/dy|    |1   1|

|dv/dx  dv/dy|  = |0   1|

So the determinant of the Jacobian is 1, meaning that the transformation is area-preserving.

Using these new variables, we can rewrite the integrand as:

(2x + 1) / (x + y)^2 = (2u - 1) / u^2

And the region R is transformed into the rectangle bounded by u = 1 and u = 2, and v = 0 and v = 2 - u.

The limits of integration become:

∫∫ (2x + 1) / (x + y)^2 dx dy = ∫∫ (2u - 1) / u^2 * 1 du dv

= ∫[1,2] ∫[0,2-u] (2u - 1) / u^2 dv du

Integrating with respect to v first, we get:

∫[1,2] ∫[0,2-u] (2u - 1) / u^2 dv du = ∫[1,2] [(2u - 1) / u^2] * (2 - u) du

= ∫[1,2] [4/u - 3/u^2 - 2/u + 1] du

= [-4ln(u) + 3/u + 2ln(u) - u] |1 to 2

= -4ln(2) + 3/2 + 2ln(1) - 1 + 4ln(1) - 3/1 - 2ln(1) + 1

= -3/2

Therefore, the value of the double integral is -3/2.

Learn more about double integral here:

https://brainly.com/question/27360126

#SPJ11

To determine the eligibility of each individual, their individual scores would need to be known and compared to the Mensa requirement.

a. The minimum Wechsler IQ test score that satisfies the Mensa requirement is approximately 130.

b. The probability that the mean score of 4 randomly selected adults on the Wechsler IQ test is at least 131 can be calculated using the Central Limit Theorem. Since the sample size is relatively large (n = 4), we can approximate the sampling distribution of the mean as normal.

Using the mean (μ = 100), standard deviation (σ = 15), and sample size (n = 4), we can calculate the z-score for a mean score of 131:

z = (131 - 100) / (15 / √4) = 4.20

Using the z-table or a statistical software, we can find the probability associated with a z-score of 4.20. This probability corresponds to the area under the normal curve to the right of the z-score.

c. We cannot conclusively determine that all 4 subjects are eligible for Mensa based solely on their mean score of 132, as the individual scores are lost. The mean score provides information about the group's performance on average, but it doesn't reveal the distribution or variation within the group. It's possible that some individuals in the group scored significantly higher or lower than the mean, affecting the eligibility of all 4 subjects.

Learn more about intelligence test: brainly.com/question/6352562

#SPJ11

Cultural factors and other variables can influence the choice of cooking fuel, and they may not necessarily be directly related to shopping behavior at a specific grocery store.

The probability of gas being used for cooking at a household, given that a person from the community does not shop at Prime Foods, cannot be determined without additional information or data. The shopping behavior at Prime Foods and the use of gas for cooking are unrelated variables, and their relationship would depend on various factors specific to the community and households.

To estimate the probability, one would need data or information on the overall usage of gas for cooking within the community, the shopping preferences of individuals in the community, and any potential correlations between these variables. Without such information, it is not possible to calculate the probability directly.

It's important to note that individual household preferences, energy availability, cultural factors, and other variables can influence the choice of cooking fuel, and they may not necessarily be directly related to shopping behavior at a specific grocery store.

Learn more about probability

brainly.com/question/32117953

#SPJ11

The formula for the n-th term (b_n) of the given sequence is b_n = 45 + (n - 1) * 11.

To find a formula for the n-th term of the sequence 45, 56, 67, ..., we can observe that each term is obtained by adding 11 to the previous term.

We can express the n-th term of the sequence as follows:

b_n = 45 + (n - 1) * 11

This formula calculates the value of the n-th term by starting with the initial term 45 and adding 11 times the number of steps away from the initial term.

Therefore, the formula for the n-th term (b_n) of the given sequence is b_n = 45 + (n - 1) * 11.

To know more about n-th term refer here:

https://brainly.com/question/27809644

#SPJ11

There are no outliers in this data set based on the 2-standard deviation criterion.

Let's calculate the standard deviation for the given data set {3, 6, 30, 9, 10, 8, 5, 4}:

The mean (average) of the data set:

Mean = (3 + 6 + 30 + 9 + 10 + 8 + 5 + 4) / 8 = 75 / 8 = 9.375

Calculate the differences between each data point and the mean, and square each difference:

(3 - 9.375)² = 40.953125

(6 - 9.375)² = 11.015625

(30 - 9.375)² = 430.015625

(9 - 9.375)² = 0.140625

(10 - 9.375)² = 0.390625

(8 - 9.375)² = 1.890625

(5 - 9.375)² = 18.140625

(4 - 9.375)² = 28.640625

The average of the squared differences (variance):

Variance = (40.953125 + 11.015625 + 430.015625 + 0.140625 + 0.390625 + 1.890625 + 18.140625 + 28.640625) / 8 = 15.0625

Take the square root of the variance to find the standard deviation:

Standard Deviation = √15.0625 = 3.878

The values that are more than 2 standard deviations away from the mean are considered outliers.

Therefore, there are no outliers in this data set based on the 2-standard deviation criterion.

To learn more on Statistics click:

https://brainly.com/question/30218856

#SPJ1