Hi there!
To solve, we must begin by calculating the total WORK done on the object.
W = F · d (Force · displacement)
Plug in the given values. Remember to convert km to m:
1 km = 1000 m
0.6 km = 600 m
W = 60 · 600 = 36000 J
Now, we can solve for power:
P = W/t
Convert minutes to seconds:
1 min = 60 sec
20 min = 1200 sec
P = 36000/1200 = 30 W ⇒ Choice D.
PLEASE ASP HELP THIS WILL GIVE 50 POINT AND BRAINLIEST！！！！！!
In introductory physics, a typical cavendish balance for measuring the gravitational constant G use metal masses 2.39kg and 16g whose center are separated by 6.81cm calculate the gravitation force between these forces, treating each as a point mass located at the center of the sphere.
gravitational constant =6.67259 × 10⁻¹¹N·m²/kg²
Answer:
Explanation:
F = GMm/d²
F = 6.67259 x 10⁻¹¹(2.39)(0.016) / 0.0681²
F = 5.5019685...x 10⁻¹⁰ N
round as appropriate, probably no more than 3 significant figures.
Value of G seems low, but well within the 3 significant figures of the other numerals. I typically see G = 6.674 x 10⁻¹¹
The force as a function of displacement of a moving object is presented by the graph. How much work is done when the object moves from 5 m to 8 m? *
Answer:
Explanation:
Work is the area under the curve between the limits
W = ½(5)(8 - 5) = 7.5 J
The work done when an object moves from 5 m to 8 m is 7.5 J.
Work done
The work done in moving an object from one point to another is equal to the product of force and displacement of the object.
W = Fs
Area under a curveThe work done on an object is equal to area under the curve
The area between point 5 m and 8 m = ¹/₂ x (8 - 5) x 5 = 7.5 J
Thus, the work done when an object moves from 5 m to 8 m is 7.5 J.
Learn more about work done here: https://brainly.com/question/8119756
Using the figure shown, if I₃= 1.17 A, then (I₁ , I₂) A is:
a- (3.17 , 2.00)
b- (1.33 , 0.17)
c- (1.67 , 0.50)
d- (1.27 , 0.10)
The value of the current in each arm of the circuit is given by Kirchhoff's
Rules.
The correct option for (I₁, I₂) is; b-. [tex]\underline{(1.33, \ 0.17)}[/tex]Reasons:
By Kirchhoff's junction rule, we have that the sum of current at a junction is given as follows;
[tex]\displaystyle \mathbf{ \sum \limits_{k = 1}^ n I_K} = 0[/tex]Which by the direction of the currents in the given circuit diagram, we have;
I₁ - (I₃ + I₂) = 0Therefore;
I₁ = I₃ + I₂
According to Kirchhoff's loop rule theory, we have;
[tex]\displaystyle \mathbf{\sum \limits_{k = 1}^ n V_K} = 0[/tex]In the loop having the 2 Volts emf., we have;
-I₃·R₁ + 2 + I₂·R₂ = 0
I₃ = 1.17 A
R₁ = 2 Ω
R₂ = 2 Ω
Which gives;
-1.17 × 2 + 2 + I₂×2 = 0
I₂ × 2 = 2.34 - 2 = 0.34
I₂ = 0.34 ÷ 2 = 0.17
I₂ = 0.17 A
From the loop having the 7 Volts emf. we have;
7 - 0.17×2 - I₁ × 4 - I₁ × 1 = 0
Which gives;
7 - 0.34 - 5·I₁ = 0
5·I₁ = 7 - 0.34 = 6.66
I₁ = 6.66 ÷ 5 = 1.332
Therefore;
[tex]\underline{\mathbf{(I_1, \, I_2)} = (1.33, \, 0.17)}[/tex]Learn more about electric circuits here:
https://brainly.com/question/2608877
Suppose a bulldozer is being hauled at 50 km/h to a construction site on the back of a flatbed truck. From which reference point would the bulldozer not appear to be moving?
Answer:
from someone watching the bulldozer from the cab of the truck or from elsewhere on the flatbed.
Explanation:
25.Figure 22.22 shows a plot
of potential versus position
along the x-axis. Make a plot
of the x-component of the
electric field for this situation.
The relationship between the potential and the electric field allows to find the results for the value of the electric field as a function of the distance is:
In the attachment we see the graph of the electric field as a function of distance.
Electric potential is defined by the change in potential energy of a test charge between two points, between the value of the test charge.
dV = - E . ds
E = [tex]- \frac{dV}{ds} \ \hat s[/tex]
Where the bold letters indicate vectors, V is the potential difference, E the electric field and s the path.
Let's apply this expression for each section of the given graph:
1) section from x₀ = 0 to x_f = 2 m, the potential is V₀ = 2 V is constant.
The derivative of a constant is zero.
E = 0
2) Section between x₀ = 2 and x_f = 4 m, the potential varies linearly from V₀ = 2 v to V_f = -2 V.
We look for the equation of the line.
V-V₀ = m (x- x₀)
We carry out the derivative.
E = - m i ^
The slope (m) is:
[tex]m= \frac{V_f - V_o}{x_f- x_o}[/tex]
Let's calculate.
[tex]m= \frac{-2 -2}{4-2} = \ -2 \ V/m[/tex]
Let's substitute.
E = [tex]2 \hat i \ V/m[/tex]
3) From x₀ = 4 to x_f = 4.5 m, the potential varies from V₀ = -2 to V_f = 0.
We look for the equation of the line and we derive.
E = - m i ^
Let's substitute.
[tex]m = \frac{0-(-2)}{4.5-4} = \ 4 V/m[/tex]
E = - 4 [tex]\hat i[/tex] V / m
4) From x₀ = 4.5 m to x_f = 6m. The potential is constant and the derivative of a constant is zero.
E = 0
5) From x₀ = 6m to x_f = 8 m, the potential changes linearly from v₀ = 0 to V_f = 1 V
We look for the equation of the line and we derive.
E = - m i ^
[tex]m = \frac{1-0}{8-6} = \ 0.5 \ V/m[/tex]
E = - 0.5 [tex]\hat i[/tex] V/m
6) From x₀ = 8m to x_f = 9m, the potential changes linearly from V₀ = 1 V to V_f = -1.
We look for the equation of the line and we derive.
E = - m i ^
[tex]m = \frac{-1-1}{9-8} = \ -2 \ V/m[/tex]
Let's substitute.
E = 2 [tex]\hat i[/tex] V/m
7) From x₀ = 9m to x_f = 10 m, the potential changes linearly from V₀ = -1 V to V_f = -2 V
We look for the equation of the line and we derive.
E = - m i ^
[tex]m = \frac{-2+1}{10-9} = \ -1 \ V/m[/tex]
Let's substitute.
E = 1 [tex]\hat i[/tex] V/m
In the attachment we can see these Electric fields as a function of distance.
In conclusion, the relationship between the potential and the electric field we can find the results for the value of the electric field as a function of the distance is:
In the attachment we see the graph of the electric field as a function of distance.
Learn more about the electric field here: brainly.com/question/14306881
17. The shape of a river is determined by which of the following? (Choose all that
apply)
A Erosion
B. Deposition
C. Weathering
D. water speed
Answer:
Water speed Plays a key role In determining The shape of it
please answer it I will mark it brainliest
Explanation:
1) If you spot something you think might be hazardous in your workplace, report it to your employer and safety rep straight away. Your employer should then decide what harm the hazard could cause and take action to eliminate, prevent or reduce that harm. Read more about risk assessments .
2) Complex hazards are understood as various combinations of sources of hazards that lead to the accident occurrences. ... The term "natural-technological" applies to both human-induced intensification of natural risks and any accidents in the technosphere triggered by natural processes or phenomena.
3)Risk Evaluation : To determine who may be harmed. Risk Control : Taking preventive measures to control the impact of risk.
In general, to do an assessment, you should:
Identify hazards.
Determine the likelihood of harm, such as an injury or illness occurring, and its severity. ...
Identify actions necessary to eliminate the hazard, or control the risk using the hierarchy of risk control methods.
When a 1 is on the input of an inverter, what is the output?
Answer:
When the input to an inverter is high (1) the output is low (0); and when the input is low, the output is high.
The degree of coldness or hotness is different for different objects. Explain with an example
Answer:
Explanation:
The degree of hotness and coldness of air is known as temperature and is measured with a thermometer in degrees-Fahrenheit or degrees-Celsius. Mercury is the only one in the liquid state at room temperature. It is used in thermometers because it has a high coefficient of expansion. The flow of heat will be always from higher to lower temperature.
PLS MARK ME WITH BRAINLEST
Who actually asked Abraham to sacrifice his son?
Answer:
Allah asked Abraham(Ibrahim)
Which is the answer
Answer:
no idea thanks you veryuch
The diagram below shows a child pulling a 50.-kg friend on a 20 kg sled by applying a 300. newton force on the sled rope at an angle of 40 degrees with the horizontal. The sled moves at constant velocity as the person pulls with the 300 N force.
The vertical component of the applied force on the sled is 192.84 N.
The given parameters:
Mass of the friend, M = 50 kgMass of the sled, m = 20 kgApplied force, F = 300 NInclination of the force, θ = 40 ⁰The vertical component of the 300 N force is calculated as follows;
[tex]F_y= F \times sin(\theta)\\\\F_y = 300 \times sin(40)\\\\F_y = 192.84 \ N[/tex]
Thus, the vertical component of the applied force on the sled is 192.84 N.
Your question is not complete, the missing part of the question is below:
The vertical component of the 300 N force is approximately?
Learn more about vertical component of forces here: https://brainly.com/question/7181504
In a collision, a 30 kg ball moving at 3 m/s transfers all of its momentum to a 5kg ball. what is the velocity of the 3kg ball after the collision?
Answer:
Explanation:
Is it a 30 kg ball or a 3 kg ball?
Does not matter as we don't have to do actual calculations
If all of the momentum is transferred out of a mass, the velocity remaining must be ZERO
a rectangular block has the density of 350g/cm3 the dimensions are 3.5 6.cm 2.5
cm calculate the mass of the bock
Answer:
18375g
Explanation:
[tex]\boxed{density = \frac{mass}{volume} }[/tex]
[tex]∴ mass = density \times volume[/tex]
Let's find the volume of the rectangular block.
Volume
= length ×breadth ×height
= 3.5 ×6 ×2.5
= 52.5cm³
Mass of the block
= 350(52.5)
= 18375g
The ability to do work and cause change is called
Answer:
I am pretty sure it is called energy.
2. Define Lightning conductor. How does it work?
In Building, there are a host of protective devices that are installed to protect lives and properties, one of them is the Lightning Conductor that a metal rod mounted on a structure and intended to protect the structure from a lightning strike. It works on the principle of induction
Principle of Operation of Lightning ConductorThe lightning conductor works on the principle of induction:
When a charged cloud passes by the building hosting the Lightning conductor, it gets a charge opposite to that of the cloud through the process of induction. They are Typically made from copper material.Most Lightening conductors are made from copper materials.
Learn about Lightning Conductor:
https://brainly.com/question/2824044
The motor in a hairdryer is attached to a 3V battery. A current of 0.8A flows through the motor for 3 minutes. Calculate the total charge in this time.
The total charge in this time is equal to 144 Coulomb.
Given the following data:
Voltage = 3 VoltsCurrent = 0.8 AmperesTime = 3 minutes.To calculate the total charge in this time:
First of all, we would convert the value of time in minutes to seconds.
Conversion:
1 minute = 60 seconds
3 minutes = 180 seconds
Formula for quantity of charge.Mathematically, the quantity of charge is given by this formula:
[tex]Q=It[/tex]
Where:
Q is the quantity of charge.I is the current.t is the time measured in seconds.Substituting the given parameters into the formula, we have;
[tex]Q = 0.8 \times 180[/tex]
Quantity of charge, Q = 144 Coulomb.
Read more on charges here: https://brainly.com/question/4313738
Answer:
960 watts
Explanation:
A stone of mass m = 1.05 kg is released from a height of h = 2.1 m into a pool of water. At a time of t = 1.83 s after hitting the surface of the water, the stone's velocity has decreased by 50%.
What is the magnitude of the average force the stone experiences, in newtons, during the time t?
Answer:
Explanation:
ignoring air resistance, the kinetic energy at water impact will equal the potential energy converted
½mv² = mgh
v = √(2gh)
v = √(2(9.81)2.1) = 6.4188... m/s
after impact, an impulse will result in a change of momentum.
There is a downward impulse due to gravity equal to the weight of the stone and an upward average force due to water resistance and buoyancy force.
FΔt = mΔv
(F - mg)Δt = m(vf - vi)
(F - mg) = m(vf - vi)/Δt
F = m(vf - vi)/Δt + mg
F = m((vf - vi)/Δt + g)
F = 1.05(((½(-6.4188) - -6.4188)/ 1.83) + 9.81)
F = 12.14198...
F = 12.1 N
The magnitude of the average force the stone experiences, will be 12.1 N.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.
The given data in the problem is;
m is the stone mass = 1.05 kg
The height is h, = 2.1 m i
The time is, t = 1.83 s
Velocity decreased by 50%.
From the law of conservation of energy the kinetic energy is equal to the potential energy;
[tex]\rm \frac{1}{2} mv^2 = mgh \\\\ v = \sqrt{2gh}\\\\ v = \sqrt{2 \times 9.81 \times 2.1 } \\\\ v= 64188 \ m/sec.[/tex]
From Newton's second law of motion, the impulsive force is equal to the change in momentum;
[tex]\rm F \triangle T = m \traingle v \\\\ (F - mg) = \frac{v_f-v_i}{\triangle t } \\\\ F = \frac{v_f-v_i}{\triangle t } + mg \\\\ F =m\frac{v_f-v_i}{\triangle t + g} \\\\ F= 12.14 98 \\\\ F=12.1 N[/tex]
Hence the magnitude of the average force the stone experiences, will be 12.1 N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
The gradual increase in activity over time is called
Answer:Progression is the way in which an individual should increase the load. It is a gradual increase either in frequency, intensity, or time or a combination of all three components.
Explanation:
True or False. Abraham and Sarah were in agreement regarding God's command to sacrifice Isaac.
Answer:
Explanation:
Not in Genesis. The proposed sacrifice of Isaac was all Abraham's doing. Sarah was not present and could not, therefore offer any input. It might have been covered in other Jewish writings, but it is not recorded in Genesis.
Since the book most widely used by Everyone is the Bible, I would answer false.
A wire that is 1.0 m long with a mass of 90 g is under a tension of 710 N. When a transverse wave travels on the wire, its wavelength is 0.10 m. What is the frequency of this wave?
Answer:
890 HzI hope you liked my answer. Thank You!
if the force acting on a body of mass 40 k.g is doubled by how much will the acceleration change
Answer:
Explanation:
Ignoring friction, the acceleration will double
F = ma
2F = m(2a)
Select the correct answer. Chloe is playing the flute some distance away from a crowd. If the atmospheric temperature is 15°C, what is the speed of the sound traveling from the flute? A. 340 meters/second B. 330 meters/second C. 320 meters/second D. 310 meters/second E. 300 meters/second
Answer:
A. 340 meters/second
I think this is the right answer.
8th grade science !
can someone help me with trying to understand this question for my homework especially how to understand the graph and use that for my evidence and help me give an idea of how should I write the evidence and reasoning?
Answer:
for reasoning you could put -> the line is at the top at the left handed sided of the chart (also the beginning) slopes down towards the very bottom right handed side of the chart, symbolising less force as distance goes.
An airplane accelerates from rest down a runway at 9.50 m/s2 for 29.3 seconds when it
takes off. What is the distance traveled while taking off?
Answer:
Explanation:
s = ½at²
s = ½(9.50)(29.3²) = 4,077.8275
s = 4080 m
when rounded to the three significant digits of the question numerals.
URGENTLY NEED HELP
This is a 2 part question
42) You pull downward with a force of 28 N on a rope that passes over a disk-shaped pulley of mass 1.2 kg and radius 0.075 m. The other end of the rope is attached to a 0.67-kg mass. (a) Is the tension in the rope the same on both sides of the pulley? If not, which side has the greater tension? (b) Find the tension in the rope on both sides of the pulley.
Answer:
The net force on the hanging mass is thus
2 T Mg 18 6.6 N 11.4 N
, enough to accelerate it upward at
17 m/s2
. The angular acceleration of the pulley is thus
2 2
Explanation:
The tension in the rope on both sides of the pulley 20.21N.
To solve this problem, we'll need to consider the forces acting on both sides of the pulley and apply Newton's second law of motion. Let's break it down step by step:
(a) Is the tension in the rope the same on both sides of the pulley?
No, the tension in the rope is not the same on both sides of the pulley. The side with the greater mass attached will experience a greater tension in the rope.
(b) Find the tension in the rope on both sides of the pulley:
Calculate the gravitational force on each mass:
Gravitational force on the pulley: Fpulley = mpulley * g, where mpulley is the mass of the pulley and g is the acceleration due to gravity (approximately 9.8 m/s²).
Gravitational force on the hanging mass: Fhanging = mhanging * g, where m_hanging is the mass of the hanging mass.
Calculate the net force on the pulley:
Net force on the pulley is the difference between the tension forces on either side: Fnet = TLeft - Tright.
Apply Newton's second law to the pulley:
For the pulley, Fnet = mpulley * a, where a is the acceleration of the pulley. Since the pulley is assumed to be massless, we can use the relationship a = α * r, where α is the angular acceleration and r is the radius of the pulley.
Use the relationship between linear acceleration and angular acceleration:
α = a / r.
Equate the torque due to the tension to the moment of inertia times the angular acceleration:
τ = I * α, where τ is the torque, I is the moment of inertia of the pulley, and α is the angular acceleration.
Substitute the expression for α and solve for the net tension:
Tnet = (τ / r) = (I * α) / r = (1/2 * mpulley * r² * α) / r = (1/2 * mpulley * r * a).
Now, substitute the expression for a from step 3 and solve for the net tension:
Tnet = (1/2 * mpulley * r * α) = (1/2 * mpulley * r * (a / r)) = (1/2 * mpulley * a).
Substitute the expression for a from step 2 (Fnet = mpulley * a) and solve for the net tension:
Tnet = (1/2 * Fnet).
Now, you can find the tensions on each side of the pulley:
Tleft = Tnet + Fhanging
Tright = Tnet - Fpulle
To know more about tension
https://brainly.com/question/16943376
#SPJ2
In three to five sentences, identify the acid, base, conjugate acid, and conjugate base. Use patterns in the periodic table to explain why the substances you identified acted as the acid and the base in this reaction.
A conjugate acid is formed from the base by accepting a proton from the acid .
A conjugate base is obtained from the Brownstead - Lowry acid when it looses a proton while the conjugate acid is obtained from the Brownstead - Lowry base when it accepts a proton. In the Brownstead - Lowry sense, acid base reaction involves the loss or gain of a proton.
Consider the hypothetical reaction; AH + :B ⇄ BH + :A. The specie BH is the conjugate acid while the specie :B is the Brownstead - Lowry base . The specie :A is the conjugate base while the specie AH is the Brownstead - Lowry acid.
Learn more about conjugate acid: https://brainly.com/question/10468518
How is probability used in blood typing
Blood Type O AB
Probability 0.45 0.04
identify the origins of breakdown when using a spectrum analyzer
Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.
1. First is Ultraviolet
2. Next is Infrared
3. Then the radio
4. Lastly the Visible lights.
These are the answers to the problem.
Which type of muscle cell can have multiple nuclei
Answer:
Skeletal Muscle cells
Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.
Answer:
skeletal muscle cells can have multiple nuclei
Explanation:
This is because they are formed from the fusion of embryonic myoblasts.