18. José Luis realiza su servicio social en el zoológico y entre sus actividades está alimentar a un mamífero en peligro de extinción. La indicación es darle 5. 5kg diarios de carne. En un día le ha dado dos raciones, una de kg y la otra de kg. ¿Cuál debe ser la cantidad de la tercera ración, para que el mamífero cubra sus requerimientos alimenticios del día?

Answer:

12

Based on the given conditions, formulate:: 72/90/15

Cross out the common factor: 72/6

Cross out the common factor: 12

In interval notation, the domain of the function f(x) is (-∞, 5/4) U (5/4, +∞).

To find the domain of the function f(x) = (6 - x) / (4x - 5), we need to identify any values of x that would result in division by zero or any other undefined operations.

The function f(x) would be undefined if the denominator, 4x - 5, equals zero. So, we set 4x - 5 = 0 and solve for x:

4x - 5 = 0

4x = 5

x = 5/4

Therefore, the function f(x) is undefined when x = 5/4.

However, since division by zero is the only operation that would cause the function to be undefined, the domain of f(x) is all real numbers except x = 5/4.

In interval notation, the domain of the function f(x) is (-∞, 5/4) U (5/4, +∞).

Learn more about   interval notation here:

https://brainly.com/question/29252068

#SPJ11

The coefficient of variation for the age of the group of people is approximately 20%. Thus, the correct option is C. 20.

The coefficient of variation (CV) is a measure of relative variability and is calculated as the ratio of the standard deviation to the mean, expressed as a percentage.

To find the coefficient of variation for the age of a group of people with a mean age of 55 and a standard deviation of 11, we can use the following formula:

CV = (Standard Deviation / Mean) * 100

Plugging in the values, we get:

CV = (11 / 55) * 100

CV ≈ 20

Therefore, the coefficient of variation for the age of the group of people is approximately 20%. Thus, the correct option is C. 20.

To know more about coefficient click here

brainly.com/question/30524977

#SPJ11

The area of cardboard needed to make a box with dimensions 25 cm x 15 cm x 8 cm is 1390 cm².

To find the surface area of the box, we first need to determine the area of each individual side and then sum them up. The box has six sides: a top, a bottom, a front, a back, a left side, and a right side. Let's calculate the area of each side.

The area of the top and bottom sides is equal to the length multiplied by the width. In this case, the dimensions are 25 cm x 15 cm, so the area of each of these sides is:

Area of top/bottom = length x width = 25 cm x 15 cm = 375 cm²

The area of the front and back sides is equal to the length multiplied by the height. In this case, the dimensions are 25 cm x 8 cm, so the area of each of these sides is:

Area of front/back = length x height = 25 cm x 8 cm = 200 cm²

The area of the left and right sides is equal to the width multiplied by the height. In this case, the dimensions are 15 cm x 8 cm, so the area of each of these sides is:

Area of left/right = width x height = 15 cm x 8 cm = 120 cm²

Now, let's sum up the areas of all six sides to find the total surface area of the box:

Total surface area = 2(Area of top/bottom) + 2(Area of front/back) + 2(Area of left/right)

= 2(375 cm²) + 2(200 cm²) + 2(120 cm²)

= 750 cm² + 400 cm² + 240 cm²

= 1390 cm²

To know more about area here

https://brainly.com/question/14994710

#SPJ4

Complete Question:

The area of the cardboard needed to make a box of size 25 cm×15 cm×8 cm will be

The given algorithm aims to find the kth smallest integer from an array. It utilizes the selection algorithm to identify this integer and then partitions the array about this value. Finally, the k smallest integers are sorted.

To start, the selection algorithm is used to find the kth smallest integer. This algorithm works by repeatedly partitioning the array into two sub-arrays based on a chosen pivot value until the desired element is found. The pivot value is chosen such that all elements to its left are smaller and all elements to its right are larger.
Once the kth smallest integer is identified, the array is partitioned about this value. This means that all elements smaller than the kth integer are placed to its left, and all elements larger than the kth integer are placed to its right. This step helps in reducing the size of the array and focusing only on the k smallest integers.
Finally, the k smallest integers are sorted. This can be done using any sorting algorithm, such as bubble sort or quicksort. The result is an array containing the k smallest integers in sorted order.
In summary, the given algorithm uses the selection algorithm to find the kth smallest integer, partitions the array about that value, and then sorts the k smallest numbers.

To know more about algorithm, visit:

https://brainly.com/question/28724722

#SPJ11

1. If a > 1, the range is (0, +∞).

2. If 0 < a < 1, the range is (0, +∞), but the function approaches 0 as x approaches infinity.

The range of the exponential function f(x) = ax, where a > 0 and a ≠ 1, depends on the sign of the coefficient a.

If a > 1, then the range of the function is (0, +∞), meaning it takes on all positive values and approaches infinity as x increases.

If 0 < a < 1, then the range of the function is (0, +∞), but the function approaches 0 as x approaches infinity. In other words, the function takes on positive values but becomes arbitrarily close to 0 as x increases.

In summary:

1.If a > 1, the range is (0, +∞).

2.If 0 < a < 1, the range is (0, +∞), but the function approaches 0 as x approaches infinity.

Learn more about range

brainly.com/question/12239390

#SPJ11

So, the approximate probability of seeing more than 45 coin flips as heads out of 100 flips is approximately 0.1539, or 15.39%.

To approximate the probability of seeing more than 45 coin flips as heads out of 100 flips, we can use the central limit theorem. The central limit theorem states that for a large enough sample size, the distribution of the sum (or average) of independent and identically distributed random variables approaches a normal distribution.

In this case, each coin flip is a Bernoulli trial with a probability of success (getting heads) of 0.4. We can consider the number of heads obtained in 100 flips as a sum of 100 independent Bernoulli random variables.

The mean of a single coin flip is given by μ = np = 100 * 0.4 = 40, and the standard deviation is given by σ = sqrt(np(1-p)) = sqrt(100 * 0.4 * 0.6) ≈ 4.90.

Now, to approximate the probability of seeing more than 45 coin flips as heads, we can use the normal distribution with the mean and standard deviation calculated above.

Let X be the number of heads in 100 flips. We want to find P(X > 45).

Using the standard normal distribution, we can calculate the z-score for 45 flips: z = (45 - 40) / 4.90 ≈ 1.02

Using a standard normal distribution table or a calculator, we can find the probability associated with this z-score: P(Z > 1.02) ≈ 1 - P(Z < 1.02)

Looking up the value in the table, we find that P(Z < 1.02) ≈ 0.8461.

Therefore, P(Z > 1.02) ≈ 1 - 0.8461 ≈ 0.1539.

So, the approximate probability of seeing more than 45 coin flips as heads out of 100 flips is approximately 0.1539, or 15.39%.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

The answer is (B). y=-4x+6.

Two lines are parallel if they have the same slope. The slope of the line y=ix+6 is 1. The only line in the options that has a slope of 1 is y=-4x+6. Therefore, y=-4x+6 is parallel to the line y=ix+6.

The given line has a slope of 1, which means that for every unit increase in x, there is a corresponding unit increase in y.

The line y = -4x + 6 is the only one with a slope of -4. Since -4 is not equal to 1, we can conclude that the line y = -4x + 6 is not parallel to the given line y = ix + 6.

To show this, we can write out the slope-intercept form of the equation of the line y=ix+6:

y=mx+b

where m is the slope and b is the y-intercept. In this case, m=1 and b=6. The slope-intercept form of the equation of the line y=-4x+6 is:

y=-4x+6

The slope of this line is also 1, which means that the two lines are parallel.

Learn more about equation here : brainly.com/question/22277991

#SPJ11

The missing angle measures are;

The triangle is an isosceles triangle with two equal sides and angles

Angle 1 = 133°

Angle 2 = 360° - 133° - 133° (Angle at a point)

= 94°

Angle 3 = 180° - (22 + 133)° (Sum of angle in a triangle)

= 180 - 155

= 25°

Angle 4 = 25° (Same rule as angle 3)

Angle 5 and 6 = x

Opposite angles in an isosceles triangle are equal

x + x + 94° = 180°

2x + 94° = 180°

2x = 180 - 94

2x = 86

x = 43°

Hence, the sum of angle in a triangle is equal to 180°

Read more on measures of angles:

https://brainly.com/question/25716982

#SPJ1

If E1 and E2 are Lebesgue measurable sets, the equality m(E1 ∪ E2) + m(E1 ∩ E2) = m(E1) + m(E2) holds.

(ii) A subset E ⊆ ℝ is Lebesgue measurable if it can be approximated from the outside by open sets with arbitrary precision. More formally, for any ε > 0, there exists an open set O ⊆ ℝ such that E ⊆ O and the Lebesgue outer measure of the set O \ E is less than ε.

The construction of the Lebesgue measure involves defining the Lebesgue outer measure as the infimum of sums of lengths of intervals covering a set. This outer measure is used to define Lebesgue measurable sets as those that can be approximated from the outside by open sets.

To show that if E1, E2 ∈ M (the class of Lebesgue measurable sets), then m(E1 ∪ E2) + m(E1 ∩ E2) = m(E1) + m(E2):

By the definition of the Lebesgue measure, we have:

m(E1 ∪ E2) = m*(E1 ∪ E2) - m*(ℝ \ (E1 ∪ E2))

m(E1) = m*(E1) - m*(ℝ \ E1)

m(E2) = m*(E2) - m*(ℝ \ E2)

Note that ℝ \ (E1 ∪ E2) = (ℝ \ E1) ∩ (ℝ \ E2) and ℝ \ E1 ⊆ ℝ \ (E1 ∪ E2) and ℝ \ E2 ⊆ ℝ \ (E1 ∪ E2).

Using the subadditivity property of the Lebesgue outer measure, we have:

m*(ℝ \ (E1 ∪ E2)) ≤ m*(ℝ \ E1) + m*(ℝ \ E2)

Subtracting m*(ℝ \ E1) and m*(ℝ \ E2) from both sides, we get:

m*(ℝ \ (E1 ∪ E2)) - m*(ℝ \ E1) - m*(ℝ \ E2) ≤ 0

Now, by the definition of the Lebesgue measure, we have:

m(E1 ∪ E2) - m(E1) - m(E2) ≤ 0

Rearranging the terms, we obtain:

m(E1 ∪ E2) + m(E1 ∩ E2) = m(E1) + m(E2)

Therefore, if E1 and E2 are Lebesgue measurable sets, the equality m(E1 ∪ E2) + m(E1 ∩ E2) = m(E1) + m(E2) holds.

To know more about Lebesgue refer here

https://brainly.com/question/31957820#

#SPJ11

The r-squared value is a measure of how well the regression line fits the data. It ranges from 0 to 1, with a value of 1 indicating a perfect fit and a value of 0 indicating no relationship between the variables.

Leverage value refers to the degree of influence an individual observation has on the regression line. It is essentially the distance between an observation and the center of the data, scaled by the variability of the data. When we talk about finding the point with the highest leverage value on a graph, we are looking for the observation that has the most significant impact on the regression line. This point can often be an outlier or an observation that has a significantly different value from the rest of the data.

When this point is omitted, the r-squared value assumes a different value from its default of 0.799. The r-squared value is a measure of how well the regression line fits the data. It ranges from 0 to 1, with a value of 1 indicating a perfect fit and a value of 0 indicating no relationship between the variables. When we remove the observation with the highest leverage value, the r-squared value will likely increase because the regression line will fit the remaining data points better. However, the exact value of the r-squared will depend on the specific data set and the regression model used.

In summary, leverage value is an important concept in regression analysis, and understanding which observations have the most significant impact on the regression line can help us identify potential outliers and improve our models. When we omit an observation with a high leverage value, the r-squared value may change, indicating how well the regression line fits the remaining data points.

To know more about leverage value visit:

https://brainly.com/question/28149224
#SPJ11

0.955900 is the probability that one or more of the servers is operational.

To find the probability that one or more of the servers is operational, we can calculate the complement of the event that both servers fail, and then subtract it from 1.

Let's denote:

P(A) = probability of the first server failing = 0.21

P(B) = probability of the second server failing = 0.21

Since the failure of one server is independent of the other server, the probability of both servers failing can be calculated as the product of their individual failure probabilities:

P(A and B) = P(A) * P(B) = 0.21 * 0.21 = 0.0441

The complement of this event (at least one server is operational) is 1 - P(A and B). Therefore, the probability that one or more of the servers is operational is:

P(at least one server operational) = 1 - P(A and B) = 1 - 0.0441 = 0.9559

Rounded to 6 decimal places, the probability is approximately 0.955900.

To know more about probability here

https://brainly.com/question/31391258

#SPJ4

The probability of the intersection of events A and B is given as follows:

P(A and B) = 0.12.

The parameters that are needed to calculate a probability are given as follows:

Then the probability is calculated as the division of the number of desired outcomes by the number of total outcomes.

The number of desired outcomes in the context of this problem is given as follows:

6 -> intersection of A and B.

The number of total outcomes is given as follows:

6 + 6  + 20 + 20 = 52.

Hence the probability is given as follows:

p = 6/52 = 0.12.

Learn more about the concept of probability at https://brainly.com/question/24756209

#SPJ1

The survey's reliability and validity depend on the methodology and quality of the sample data.

In the given scenario, a survey aims to investigate whether the proportion of today's high school seniors who own their own cars is higher than it was a decade ago. The survey proposes an alternative hypothesis that suggests a change in the proportion, while the null hypothesis assumes no change. The survey also mentions that the observed result would occur by chance 1.7% of the time if the null hypothesis were true.

To evaluate the reasonability of the survey, we need to consider the concept of statistical significance. Statistical significance is a measure of how likely the observed result would occur due to chance alone, assuming the null hypothesis is true. In hypothesis testing, a common threshold for statistical significance is α (alpha), typically set at 0.05 or 5%.

In this case, the survey suggests that the observed result would occur by chance 1.7% of the time if the null hypothesis were true. This is known as the p-value. The p-value represents the probability of obtaining a result as extreme or more extreme than the observed result, assuming the null hypothesis is true.

If the p-value is less than the chosen significance level (α), we reject the null hypothesis in favor of the alternative hypothesis. In this scenario, since the p-value is 1.7%, which is less than 5%, we can conclude that the observed result is statistically significant.

Therefore, it is reasonable to conduct the survey and investigate whether the proportion of high school seniors who own their own cars has increased compared to a decade ago. The survey provides evidence to support the alternative hypothesis and suggests that the observed result is unlikely to occur by chance alone, assuming the null hypothesis is true.

However, it's important to note that the survey's reasonability is based on the assumption that the survey methodology and sample data are reliable and representative. The survey should ensure that the sample is randomly selected and sufficiently large to provide accurate results. Additionally, the survey should consider potential confounding variables and sources of bias that could affect the findings.

In summary, the survey investigating the proportion of high school seniors who own their own cars and proposing a higher proportion than a decade ago is reasonable based on the evidence provided, which suggests a statistically significant result. However, the survey's reliability and validity depend on the methodology and quality of the sample data.

Learn more about reliability here

https://brainly.com/question/1265793

#SPJ11

Given statement solution is :- Nathan's purple paint has a higher percentage of red paint (47.37%) compared to Samantha's purple paint (42.86%). Therefore, Nathan's purple paint will be redder.

To determine whose purple paint will be redder, we need to compare the percentage of red paint in Nathan's and Samantha's mixtures.

Let's calculate the percentage of red paint in Nathan's mixture first:

Total cups of paint in Nathan's mixture = 10 cups (blue) + 9 cups (red) = 19 cups

Percentage of red paint in Nathan's mixture = (9 cups / 19 cups) * 100% ≈ 47.37%

Now, let's calculate the percentage of red paint in Samantha's mixture:

Total cups of paint in Samantha's mixture = 4 cups (blue) + 3 cups (red) = 7 cups

Percentage of red paint in Samantha's mixture = (3 cups / 7 cups) * 100% ≈ 42.86%

Comparing the percentages, we see that Nathan's purple paint has a higher percentage of red paint (47.37%) compared to Samantha's purple paint (42.86%). Therefore, Nathan's purple paint will be redder.

For such more questions on Redder Purple Paint

https://brainly.com/question/31509853

#SPJ8

we found that Julian is estimated  70.0 kilometers from his starting position.

The total  distance traveled in the east-west direction is :

22 km - 77 km = -55 km.

The  negative value can be explained that  Julian has traveled 55 km in the  direction of west which is relative to his starting point.

Julian's total  distance traveled in the north-south direction is 44 km.

We then apply  the Pythagorean theorem to calculate  the distance between Julian's starting point and his final position:

distance = √((55 km)² + (44 km)²)

distance =- 70.0 km

In conclusion, Julian can be said to be  70.0 kilometers from his starting position.

Learn  more about Pythagorean theorem  at:

https://brainly.com/question/654982

#SPJ1

#complete question:

Julian jogs 22 kilometers east 44 kilometers north, and then 77 kilometers west.  How far is Julian from his starting position, to the nearest tenth of a kilometer?

Answer:

its 6.4

Step-by-step explanation:

khan lol

Answer:

A triangle is a right triangle if the square of the length of the longest side (the hypotenuse in a right triangle) is equal to the sum of the squares of the lengths of the other two sides. This is known as the Pythagorean theorem, which can be written as:

a² + b² = c²

where c is the length of the hypotenuse, and a and b are the lengths of the other two sides.

In this case, the longest side is 12, and the other two sides are 6 and 9. So we can substitute these values into the Pythagorean theorem:

6² + 9² = 12²

36 + 81 = 144

117 = 144

These values are not equal, so the triangle with side lengths 6, 9, and 12 is not a right triangle.

The p(t) = 1 is an equilibrium solution of the given ODE since the value of p(t) does not change with time and it satisfies the ODE.

An ODE that describes the price p is given by:

p"(t) – (k – 1)p' (t) + kp(t)

=k, where k > 0 is a constant describing how people's expectations on the rate of inflation changes depending on the observed inflation rate.

Let's show that p(t) = 1 is an equilibrium solution of the ODE.

Recall that an equilibrium solution is just a solution that is constant.Here's how we can show that p(t) = 1 is an equilibrium solution of the ODE

Given that the ODE is:

p''(t) - (k-1)p'(t) + kp(t) = k

The equilibrium solution is found by setting p''(t) = 0

and p'(t) = 0 and solving for p(t).

So, let us differentiate p(t) = 1 with respect to t.

p(t) = 1 is already given and it is not a function of t so its first and second derivatives are zero.

So, p''(t) = 0

and p'(t) = 0.p''(t) - (k-1)p'(t) + kp(t)

= k0 - (k-1)(0) + k(1)

= k

To know more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

p(t) = 1 is an equilibrium solution of the ODE as the given condition holds for this value. It is an equilibrium solution of the ODE.

Given that the ODE is:p''(t) - (k - 1)p'(t) + kp(t) = k

where k > 0 is a constant describing how people's expectations on the rate of inflation changes depending on the observed inflation rate, and we have to show that p(t) = 1 is an equilibrium solution of the ODE.

For an equilibrium solution, we need to have:p''(t) - (k - 1)p'(t) + kp(t) = 0

If we put p(t) = 1 in the above equation,

we get:p''(t) - (k - 1)p'(t) + k = 0

Now let us compute p'(t) and p''(t).p(t) = 1 is a constant function, and therefore:

p'(t) = 0

and

p''(t) = 0

Thus, the ODE becomes:0 - (k - 1)0 + k = 0

Therefore, p(t) = 1 is an equilibrium solution of the ODE as the given condition holds for this value.

Hence, it is an equilibrium solution of the ODE.

To know more about equilibrium, visit:

https://brainly.com/question/30694482

#SPJ11

The business has a savings account that earns initially invested approximately $3,455 in 1991.( C: $3,455).

The business initially invested in 1991, we need to use the given information and the formula provided.

The formula F = P(1 + R)²T is used to determine the final amount in the savings account.

Given information:

The business had $4,000 in the account at the end of 1996.

The annual interest rate is 3%.

The time in years is (1996 - 1991) = 5 years.

To solve for the initial investment amount (P):

F = P(1 + R)²T

$4,000 = P(1 + 0.03)²5

Now for P:

$4,000 = P(1.03)²5

Dividing both sides of the equation by (1.03)²5:

P = $4,000 / (1.03)²5

Calculating the value:

P ≈ $3,455.47

To know more about  account here

https://brainly.com/question/29437263

#SPJ4

The correct expression that is equivalent to (6p) + 3 is 6 + 3p.

Let's break down the given expression step by step:

(6p) + 3

First, we have the multiplication of 6 and p, which gives us 6p. Then, we add 3 to the result as

= 6 + 3p

Option F, 3 - (6p), is not equivalent to the original expression because it involves subtraction instead of addition.

Option G, 3 + (p * 6), is not equivalent to the original expression because it involves the multiplication of p and 6 instead of the multiplication of 6 and p.

Option J, 6(p + 3), is not equivalent to the original expression because it involves the multiplication of 6 and (p + 3).

Learn more about Expression here:

https://brainly.com/question/28170201

#SPJ1

The statement n² + 1 ≥ 2ⁿ holds true for all values of n in the range [1, 4].

To prove the statement n² + 1 ≥ 2ⁿ for the integer values of n in the range [1, 4], we need to verify the equation for each value of n within that range. By testing n = 1, 2, 3, and 4, we find that the equation holds true for all these values.

The statement n² + 1 ≥ 2ⁿ needs to be verified for the integer values of n in the range [1, 4]. Upon evaluating the equation for each value of n, we find that it holds true for all n in the given range. Therefore, the statement is proven to be true for the values n = 1, 2, 3, and 4.

To verify the given statement, we substitute the values of n from the range [1, 4] into the equation n² + 1 ≥ 2ⁿ and evaluate the expression for each value.

For n = 1, we have 1² + 1 ≥ 2¹, which simplifies to 2 ≥ 2. This is true.

For n = 2, we have 2² + 1 ≥ 2², which simplifies to 5 ≥ 4. This is also true.

For n = 3, we have 3² + 1 ≥ 2³, which simplifies to 10 ≥ 8. Again, this holds true.

Lastly, for n = 4, we have 4² + 1 ≥ 2⁴, which simplifies to 17 ≥ 16. Once again, this inequality is true.

Since the equation holds true for all values of n in the range [1, 4], we can conclude that the statement n² + 1 ≥ 2ⁿ is verified for n = 1, 2, 3, and 4.

Therefore, the statement n² + 1 ≥ 2ⁿ holds true for all values of n in the range [1, 4].

To learn more about Range:

brainly.com/question/29204101

#SPJ11

The amount of work done by pulling the wagon is approximately 11,000 Joules.

3. To find the amount of work done by pulling the wagon, we need to calculate the dot product of the force applied (tension in the rope) and the displacement of the wagon. The dot product is given by:

Work = Force * Displacement * cosθ

where

θ is the angle between the force and displacement vectors.

Given:

Force (tension in the rope) = 2200 N

Displacement = 10 meters

θ = 60°

First, we need to convert the angle to radians:

theta = 60° * (π/180) ≈ 1.047 radians

Next, we can calculate the work done:

Work = 2200 N * 10 m * cos(1.047)

Work ≈ 2200 N * 10 m * 0.5

Work ≈ 11,000 N∙m or 11,000 Joules

Therefore, the amount of work done by pulling the wagon is approximately 11,000 Joules.

4. This question cannot be solved because of invalid variables.

Learn more about work done here:

https://brainly.com/question/8119756

#SPJ4

(3) The work done by pulling the wagon to the desired distance of 10 m is 11,000 J.

(4) The equation of the line parallel to the plane is 2y + 5x  + 41 = 0.

(3) The work done by pulling the wagon to the desired distance of 10 m is calculated by applying the following formula.

W = Fd

where;

The amount of work done by pulling the wagon 10 meters to the right the rope is calculated as;

W = 2200 N x 10 m x cos (60)

W = 11,000 J

(4) The equation of the line parallel to the plane will have the same slope;

point on the line = (y = -2-1, x = -4 - 3) =  (y = -3, x = -7)

The equation;

5x + 2y + 1 = 2

2y = 1 - 5x

y = 1/2 - 5x/2

The slope of the line , m = -5/2

The equation of the line is determined as;

y + 3 = -5/2(x  + 7)

2(y + 3) = -5(x + 7)

2y + 6 = - 5x - 35

2y + 5x  + 41 = 0

Learn more about equation of line here: https://brainly.com/question/13763238

#SPJ4

The complete question is below;

(3).  Find the amount of work done by pulling the wagon 10 meters to the right the rope makes an angle of 60' with the horizontal and the tension in the rope 2200N. (4). Find the equation of the plane containing the line  = (y = -2-1, x = -4 - 3) parallel to the plane 5x +2y + 1 = 2.

The probability that he answers the first question correctly and the second question correctly is A. 1/16.

Probability is a way to gauge how likely something is to happen. Many things are difficult to forecast with absolute confidence.

Since Bobby is randomly guessing, the probability of him getting each question correct is 1/4. The probability of him getting both questions correct is the product of the probabilities of getting each question correct, since the events are independent. Therefore:

P(getting both questions correct) = P(getting the first question correct) x P(getting the second question correct)

P(getting both questions correct) = (1/4) x (1/4)

P(getting both questions correct) = 1/16

So, the answer is A. 1/16.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ4

The power of a hypothesis test is change in α from 0.05 to 0.10 (option b).

The significance level (α) is the probability of rejecting the null hypothesis when it is true. It represents the threshold for deciding whether there is sufficient evidence to reject the null hypothesis. By changing the significance level from 0.05 to 0.10, we are essentially increasing the probability of rejecting the null hypothesis.

Increasing the significance level directly affects the power of a hypothesis test. A higher significance level increases the probability of rejecting the null hypothesis, even when it is true. Consequently, the power of the test increases since it becomes more likely to detect a true effect or difference.

However, it's important to note that increasing the significance level also increases the probability of committing a Type I error, which is the probability of rejecting the null hypothesis when it is actually true.

Therefore, while increasing α can increase the power, it also introduces a higher risk of making incorrect conclusions.

Hence the correct option is (b)

To know more about hypothesis here

https://brainly.com/question/29576929

#SPJ4

Complete Question:

Explain how each of the following changes would impact the power of a hypothesis test.

a. increase in sample size

b. change in α from 0.05 to 0.10

c. decrease in the sample mean

d. decrease in the sample standard deviation

Integrating with respect to z, r, and θ in that order, we can evaluate the integral to find the volume of the solid.

To find the volume of the given solid using polar coordinates, we need to express the equations of the cone and sphere in polar form and determine the limits of integration.

Cone: z = (x^2 + y^2)^(1/2)

In polar coordinates, the cone equation becomes z = r.

Sphere: x^2 + y^2 + z^2 = 81

Substituting z = r in polar coordinates, the sphere equation becomes r^2 + z^2 = 81, which simplifies to r^2 + r^2 = 81, and further simplifies to r^2 = 40.5.

To find the limits of integration, we need to determine the bounds for the radius (r) and the angle (θ).

Bounds for r:

Since the sphere equation is given by r^2 = 40.5, we take the square root to find r = √(40.5) = 6.36 (approximately). Thus, the upper bound for r is 6.36.

Bounds for θ:

We want to cover the entire solid, so we take θ to range from 0 to 2π (a full revolution).

Now we can set up the integral to find the volume:

V = ∫∫∫ dV

= ∫∫∫ r dz dr dθ

= ∫[0 to 2π] ∫[0 to 6.36] ∫[r to √(40.5)] r dz dr dθ

Note: The above calculations assume the solid lies entirely in the positive z-axis direction. If the solid is symmetric with respect to the xy-plane, you would need to multiply the resulting volume by 2.

To know more about volume visit:

brainly.com/question/28058531

#SPJ11

This completes the inductive step.

By the principle of mathematical induction, we have shown that (cos(x) + i sin(x))^n = cos(nx) + i sin(nx) holds for all positive integers n.

To show that (cos(x) + i sin(x))^n = cos(nx) + i sin(nx) for any positive integer n, we can use the property of De Moivre's theorem.

De Moivre's theorem states that for any complex number z = r(cos(theta) + i sin(theta)), and a positive integer n:

z^n = r^n (cos(ntheta) + i sin(ntheta))

In this case, we have z = cos(x) + i sin(x) and we want to prove that:

(cos(x) + i sin(x))^n = cos(nx) + i sin(nx)

Let's prove this statement using induction.

Base case: For n = 1,

(cos(x) + i sin(x))^1 = cos(x) + i sin(x), which is true.

Inductive step: Assume that for some k ≥ 1, it holds that:

(cos(x) + i sin(x))^k = cos(kx) + i sin(kx)

Now, we need to show that it holds for k+1:

(cos(x) + i sin(x))^(k+1) = cos((k+1)x) + i sin((k+1)x)

Using the assumption and De Moivre's theorem, we have:

(cos(x) + i sin(x))^k * (cos(x) + i sin(x)) = (cos(kx) + i sin(kx)) * (cos(x) + i sin(x))

Expanding both sides using the distributive property of complex numbers:

(cos(x))^k (cos(x) + i sin(x)) + (i sin(x))^k (cos(x) + i sin(x)) = cos(kx) cos(x) + i cos(kx) sin(x) + i sin(kx) cos(x) - sin(kx) sin(x)

Simplifying further:

cos((k+1)x) + i sin((k+1)x) = cos(kx) cos(x) - sin(kx) sin(x) + i (cos(kx) sin(x) + sin(kx) cos(x))

Using the trigonometric identities: cos(A + B) = cos(A) cos(B) - sin(A) sin(B) and sin(A + B) = sin(A) cos(B) + cos(A) sin(B), we can rewrite the right-hand side as:

cos((k+1)x) + i sin((k+1)x)

To know more about mathematical visit:

brainly.com/question/27235369

#SPJ11

To make the given system consistent, the value of b should be any real number except for 4.

The given system of equations is:

4x1 + 2x2 = b

2x1 + x2 = 0

To determine the value of b that makes the system consistent, we need to analyze the equations. If we subtract the second equation from twice the first equation, we get:

(2 * (4x1 + 2x2)) - (2x1 + x2) = 2b - 0

8x1 + 4x2 - 2x1 - x2 = 2b

6x1 + 3x2 = 2b

For the system to have a solution, the coefficient matrix [6 3] must be linearly independent from the augmented matrix [2b]. This means that the determinant of the coefficient matrix must not be zero.

Calculating the determinant, we have:

det([6 3]) = (6 * 1) - (3 * 2) = 6 - 6 = 0

Since the determinant is zero, the system is consistent if and only if the right-hand side, which is 2b, is also zero. Thus, 2b = 0, and solving for b, we find b = 0.

In conclusion, any real value of b except for 4 will make the given system of equations consistent.

Learn more about Consistent:
brainly.com/question/29243692

#SPJ11

The volume of the figure, which is a rectangular pyramid, would be C. 90 km ³

To find the volume of a rectangular pyramid, the formula is:

= ( Length of base x Width of base x Height of rectangular pyramid )

Length of base = 6 km

Width of base = 5 km

Height of rectangular pyramid = 3 km

The volume is therefore :

= 6 x 5 x 3 km

= 30 x 3 km

= 90 km ³

In conclusion, the volume of the figure is 90 km ³.

Find out more on volume at https://brainly.com/question/924442

#SPJ1

The number of Indian and foreign visitors as per the data given of entry fee , tickets sold is equal to 230 and 250 respectively.

Let us denote the number of Indian visitors as 'I' and the number of foreign visitors as 'F'.

The entry fee for Indians is Rs. 150,

And the entry fee for foreigners is Rs. 400.

The cashier sold a total of 480 tickets.

The total amount collected is Rs. 1,34,500.

Set up a system of equations to represent the given information,

total number of tickets sold = 480

⇒ I + F = 480  ___(1)

Total amount collected = 1,34,500

⇒ 150I + 400F = 1,34,500 ___(2)

To solve this system of equations, use the substitution method.

From Equation 1, express I in terms of F,

I = 480 - F

Substituting this value of I into Equation 2,

⇒ 150(480 - F) + 400F = 1,34,500

Expanding and simplifying the equation,

⇒ 72,000 - 150F + 400F = 1,34,500

⇒250F = 1,34,500 - 72,000

⇒250F = 62,500

⇒F = 62,500 / 250

⇒F = 250

Now that we have the number of foreign visitors,

Substitute this value back into Equation 1 to find the number of Indian visitors,

I + 250 = 480

⇒ I = 480 - 250

⇒ I = 230

Therefore, the number of Indian visitors is 230, and the number of foreign visitors is 250 as per tickets sold.

learn more about tickets here

brainly.com/question/10842688

#SPJ4

The above question is incomplete, the complete question is:

Amber Fort situated in Amer (Rajasthan) is one of the famous tourist destination .This fort was built by Mughals and is famous for its artistic style and design. The entry ticket for the fort is Rs.150 for Indians and Rs. 400 for foreigners. One day cashier found that 480 tickets were sold and Rs. 1,34,500 was collected. calculate the number of Indian and Foreign visitors.