2. describe the mathematical relationship between ph and concentration for a strong acid, consider the log function used when calculating ph.

Energy is the capacity to do work. Therefore the correct option is option D.

A force acting over a distance is what is meant by the term "work" in physics. Energy is the capacity to exert a force across a distance or to perform labour.

Kinetic energy (energy of motion), potential energy (energy held in an object due to its position or state), thermal energy (energy resulting from the motion of atoms and molecules), and electromagnetic energy (energy carried by electromagnetic waves, such as light) are only a few examples of the various forms that energy can take.

Even though it might be connected to an object's motion, energy is not the same as actual motion. Chemical bonds between atoms and molecules can also be related to energy because they need energy to be released or input in order to break or form. Therefore the correct option is option D.

For such more question on Energy:

https://brainly.com/question/29339318

#SPJ11

Locations along the axon with the correct description of the processes occurring at that position.

1. Location (B) - At this location, the voltage-gated K⁺ channels are closing.

2. Location (F) - At this location, the axon membrane reaches threshold and the voltage-gated Na⁺ channels open.

3. Location (A) - At this location, the voltage-gated Na⁺ channels reactivate.

4. Location (D) - At this location, the voltage-gated Na⁺ channels are inactivating and the voltage-gated K⁺ channels are opening.

5. Location (G) - At this location, the axon membrane is at resting potential.

6. Location (C) - At this location, the membrane potential changes sign (from a positive value to a negative value) and the voltage-gated K⁺ channels are open.

7. Location (E) - At this location, the membrane potential changes sign (from a negative value to a positive value) and the voltage-gated Na⁺ channels are open.

As an action potential moves along an axon, different locations reach different stages of the action potential. Voltage-gated Na⁺ channels open at threshold (location F), leading to depolarization and the rising phase of the action potential. At the peak of the action potential (location D), the voltage-gated Na⁺ channels inactivate, and voltage-gated K⁺ channels open, leading to repolarization and the falling phase of the action potential.

At resting potential (location G), neither voltage-gated Na⁺ nor K⁺ channels are open. The voltage-gated K⁺ channels are closing at location B, and reactivating Na⁺ channels are present at location A. Finally, at location C, the membrane potential changes sign and the voltage-gated K⁺ channels are open, contributing to further repolarization.

To know more about the action potential refer here :

https://brainly.com/question/30701189#

#SPJ11

The molar concentration of [tex]K^+[/tex] in 0.15 M of [tex]K_2S[/tex] is 0.30 M.

The molar concentration is defined as the number of moles in one liter of solution. It has a unit of Molar or M.  

The molar concentration of the solution is 0.15 M. It gives the following ions in an aqueous solution.

[tex]K_2S[/tex] --------> [tex]2K^+[/tex] + [tex]S^{2+[/tex]

The molar concentration of the ions can be calculated by multiplying the stoichiometric coefficient of the ion

Thus, the molar concentration of the ion [tex]S^{2-[/tex] = 0.15

= 0.15 M

Thus, the molar concentration of the ion [tex]K^+[/tex] = 2 * 0.15

= 0.30 M

0.30 M is the molar concentration of ions of potassium.  

Learn more about Molar concentration:

https://brainly.com/question/29366031

#SPJ4

To accomplish step 1 of this organic synthesis reaction, the necessary reagent is sodium hydride (NaH). This is a strong base commonly used in organic synthesis to remove acidic hydrogen atoms and form new carbon-carbon bonds. In this reaction, NaH is used to deprotonate the alpha carbon of the ketone, forming an enolate ion.

The enolate ion then attacks the electrophilic carbon of the ester in an aldol condensation reaction, resulting in the formation of a beta-hydroxyketone product.
NaH is preferred over other bases because it is highly reactive and can be easily removed from the reaction mixture by filtration. Additionally, it does not add any unwanted byproducts to the reaction, making it a clean and efficient choice. Other bases, such as potassium tert-butoxide or lithium diisopropylamide (LDA), could also be used in this reaction, but NaH is often the preferred choice due to its high reactivity and ease of use.

for more such questions on  sodium hydride

https://brainly.com/question/13061869

#SPJ11

1) The charge on the metal is + 2

2) The valency of the element Q is 3

We know that the kind of cell that we dealing with here is electrochemical cell.

In this problem, I = 15A and t = 965s, so:

Q = 15A x 965s = 14475 C

Then;

The amount of substance produced n is given by:

n = Q / (F x z)

where F is the Faraday constant (96500 C/mol), and z is the valency of the ion.

In this problem, n = 0.05 moles, so:

0.05 = 14475 C / (96500 C/mol x z)

Solving for z, we get:

z = 3

Learn more about cell:https://brainly.com/question/20337942

#SPJ1

Neil Armstrong earned a Master of Science degree in Aerospace Engineering from the University of Southern California in 1970.

He pursued this degree while working as a NASA astronaut His thesis was focused on the stability of a lunar landing vehicle during the final phase of descent.

In 1962, Armstrong joined NASA as a civilian test pilot and astronaut. He soon became part of the Gemini and Apollo space programs. During his tenure at NASA, he piloted the Gemini 8 mission in 1966. He also commanded the Apollo 11 mission in 1969, where he became the first person to set foot on the Moon.

Learn more about Neil Armstrong, here:

https://brainly.com/question/30763002

#SPJ1

In molecular orbital theory, atomic orbitals from adjacent atoms can overlap to form bonding or antibonding molecular orbitals.

Here, we will examine the orientations of p and d orbitals that can result in these types of orbitals.      

When a p orbital (lobed shape) overlaps with a d orbital (cloverleaf shape), there are various ways they can align to form bonding and antibonding molecular orbitals. Bonding molecular orbitals result from constructive interference between the wave functions of the atomic orbitals, leading to increased electron density between the nuclei. Antibonding molecular orbitals, on the other hand, arise from destructive interference, creating a node or region of zero electron density between the nuclei.

1. Bonding orientation: A p orbital can overlap with a d orbital when their lobes are parallel and adjacent to each other, like px with dxz. The electron density accumulates between the nuclei, creating a bonding interaction.

2. Antibonding orientation: A p orbital can form an antibonding molecular orbital with a d orbital when their lobes are oriented in such a way that the positive phase of one orbital overlaps with the negative phase of the other, like px with dyz. This leads to destructive interference, and a node forms between the nuclei.

3. Non-bonding orientation: In some cases, there may be no significant overlap between the p and d orbitals, resulting in a non-bonding interaction. For example, a pz orbital may not interact significantly with a dxy orbital due to their orthogonal orientation.

To better visualize these interactions, it is helpful to draw diagrams showing the overlap of the orbitals and the resulting electron density distribution for bonding, antibonding, and non-bonding cases.

To know more about molecular orbital theory, refer to the link below:

https://brainly.com/question/29642622#

#SPJ11

The specific names and abbreviations of nucleosides and nucleotides depend on the specific nitrogenous base and sugar present, all the answers are below:

For more such question on abbreviations

https://brainly.com/question/14587349

#SPJ11

The correct option is B. The correct sequence of reagents that will perform the desired transformation is 1)[tex]R_2NH,[/tex] (H+), ([tex]-H_20[/tex]) 2) 3) [tex]H_30[/tex]+ 2) [tex]H_30[/tex]*.

Transformation refers to the process of changing the chemical composition or structure of a substance. This change can occur through various chemical reactions, which involve the breaking and forming of chemical bonds between atoms. In biochemistry, chemical transformations are vital for the functioning of living organisms, as they are involved in metabolic pathways that break down nutrients and produce energy.

Chemical transformations are essential in many areas of chemistry, including organic synthesis, materials science, and biochemistry. In organic synthesis, for example, chemists use various reactions to transform simple starting materials into more complex molecules, which can be used as drugs, pesticides, or other useful compounds. In materials science, chemical transformations are used to create new materials with specific properties, such as strength, flexibility, or conductivity.

To learn more about Transformation visit here:

brainly.com/question/13801312

#SPJ4

The pressure inside the flask is 0.976 atm (rounded to the thousandth place).

We can use the Ideal Gas Law, which states:

PV = nRT

where:

P = pressure

V = volume

n = number of moles

R = gas constant

T = temperature

We can rearrange this equation to solve for the pressure:

P = nRT/V

We are given the volume V = 9.5 L, the number of moles n = 0.85 g / 32 g/mol (since O2 has a molar mass of 32 g/mol), and the temperature T = 25.80C = 298.95 K. The gas constant R is 0.08206 L atm / (mol K).

Substituting these values into the equation, we get:

P = (0.85 g / 32 g/mol) * (0.08206 L atm / (mol K)) * (298.95 K) / (9.5 L)

P = 0.976 atm

Therefore, the pressure inside the flask is 0.976 atm (rounded to the thousandth place).

To learn more about pressure in a flask visit:

brainly.com/question/30003139

True, an orbital is a probability map showing exactly where an electron can be found in an atom. In an atom, electrons reside in specific regions called orbitals. These orbitals describe the probability distribution of an electron's position in a three-dimensional space around the nucleus of the atom. An orbital does not show the exact path or trajectory of an electron, but it provides a representation of the regions where an electron is most likely to be found.

There are various types of orbitals, such as s, p, d, and f orbitals, which differ in their shapes and energies. Electrons within these orbitals are organized into energy levels or shells. As you move away from the nucleus, the energy levels and the number of electrons in each shell increase. The distribution and arrangement of electrons in orbitals play a vital role in determining the chemical and physical properties of an atom.
In summary, an orbital represents a probability map that indicates the most likely locations for an electron within an atom, providing valuable information about the atom's structure and behavior.

For more information on energy levels see:

https://brainly.com/question/29736874

#SPJ11

Fission is a nuclear reaction in which the nucleus of an atom splits into two or more smaller nuclei, along with the release of a large amount of energy. In the case of 23592U, fission occurs when it absorbs a neutron, splitting into two smaller nuclei and releasing several neutrons, as well as a significant amount of energy.

To calculate the total energy released in MeV if 1.8 kg of 23592U were to undergo fission entirely by this reaction, we need to use the equation E=mc². Here, E represents the energy released, m represents the mass of the uranium, and c represents the speed of light. The mass of 1.8 kg of 23592U can be converted to atomic mass units (amu) by dividing by Avogadro's number, which gives us approximately 1.08 x 10²⁵ amu. The energy released per fission of 23592U is approximately 200 MeV. Thus, the total energy released by the fission of 1.8 kg of 23592U can be calculated as follows: E = mc² E = (1.08 x 10²⁵ amu) x (1.66 x 10⁻²⁷ kg/amu) x (2.998 x 10⁸ m/s)² x (2 fissions/atom) x (200 MeV/fission) E = 3.88 x 10¹⁷ J Converting this to MeV, we get: E = (3.88 x 10¹⁷ J) / (1.602 x 10⁻¹³ J/MeV) E = 2.42 x 10³⁰ MeV Therefore, if 1.8 kg of 23592U were to undergo fission entirely by this reaction, it would release a total energy of approximately 2.42 x 10³⁰ MeV.

Learn more about neutrons here-

https://brainly.com/question/28992636

#SPJ11

The conjugate acid of NH₃ is NH₄⁺, When ammonia accepts a proton (H+), it becomes NH₄⁺. In this reaction, NH₃ is the base and NH₄⁺ is the conjugate acid, because NH₄⁺ is formed by the addition of a proton to NH₃ .

Ammonia (NH₃) is a weak base because it can accept a proton (H+) to form its conjugate acid, ammonium ion (NH₄⁺). In this reaction, ammonia (NH₃) acts as a Bronsted-Lowry base by accepting a proton (H+) to form ammonium ion (NH₄⁺), which acts as a Bronsted-Lowry acid. The key concept to understand here is the relationship between a weak base and its conjugate acid. A weak base can accept a proton to form its conjugate acid, which is always one proton (H+) more than the original weak base.

Learn more about conjugate acids here.

https://brainly.com/question/31229565

#SPJ1

The pressure exerted by a gas on its container is directly proportional to the volume of the container. This relationship is known as Boyle's Law, named after the physicist Robert Boyle who first discovered it in the 17th century. Boyle's Law states that when the temperature of a gas remains constant, the pressure and volume of the gas are inversely proportional to each other. In other words, as the volume of the container decreases, the pressure of the gas increases, and vice versa.

This relationship can be explained by the behavior of gas molecules. When a gas is contained in a container, its molecules are constantly colliding with the walls of the container. The more molecules there are, the more collisions there will be, and the greater the pressure will be. However, if the volume of the container is decreased, there will be less space for the molecules to move around in, so they will collide more frequently with the walls of the container, resulting in a higher pressure.
In contrast, the mass of the individual gas molecules, the centigrade temperature of the gas, and the fahrenheit temperature of the gas do not have a direct effect on the pressure exerted by the gas on its container. These factors may affect other properties of the gas, such as its density or its behavior under different conditions, but they are not directly related to Boyle's Law. Similarly, the number of molecules of gas in the sample may affect the pressure of the gas, but only insofar as it affects the volume of the container, which is the primary determinant of pressure in Boyle's Law.

for more such questions on volume

https://brainly.com/question/29796637

#SPJ11

It will take approximately 0.793 seconds for the concentration of A to decrease to 25% of its initial amount.

The rate law for a first-order reaction is expressed as -d[A]/dt = k[A], where [A] represents the concentration of A and k is the rate constant.

To determine the time required for A to decrease to 25% of its initial amount, we need to use the integrated rate law for a first-order reaction, which is ln([A]/[A]0) = -kt. Here, [A]0 is the initial concentration of A and t is the time elapsed. We can rearrange this equation to solve for t as t = ln([A]0/[A]) / k.

Substituting the given values, we have k = 3.5 s-1 and [A]/[A]0 = 0.25. Plugging these values into the equation, we get t = ln(1/0.25) / 3.5 s-1, which simplifies to t = 0.793 s. Therefore, it will take approximately 0.793 seconds for the concentration of A to decrease to 25% of its initial amount.

To know more about concentration, visit:

https://brainly.com/question/10725862

#SPJ11

Yes for instance.

once given the physical properties of the alkali metal you can be able to indicate the group and where you can find them in the periodic table. properties like it being soft and having relatively low melting point (Li, Na, K, RB, CS, Fr)

or once been said that it reacts with group 7 Elements that means we are quick to know it out of those elements.

now to answer your question specifically, if the information given upon says an element burns in air with a yellow flame. Then we are quick to say it's Sodium.

so yeah.

1) The sequence of addition of the ether solution in the formation of the Grignard reagent is designed to minimize the occurrence of coupling reactions.

2) The two kinds of carbonyl acceptor structures that can be used in addition to benzoate esters to afford triphenylmethanol are aldehydes and ketones.

1) As mentioned in the question, coupling is an unavoidable side reaction that lowers the yield of Grignard reagents. The mechanism of the coupling process is not well understood, but it is known that the rate of coupling appears to depend on the square of the concentration of the halide. By adding the ether solution slowly to the alkyl halide, the concentration of the halide is kept low, thereby reducing the rate of coupling.

Additionally, adding the ether solution dropwise ensures that the reaction is well-controlled and does not become too exothermic. Overall, the sequence of addition of the ether solution is a practical way to minimize the impact of coupling on the yield of Grignard reagents.

2) Aldehydes react with one equivalent of the Grignard reagent to form a secondary alcohol, which can then react with another equivalent of the Grignard reagent to form triphenylmethanol. Ketones, on the other hand, react with two equivalents of the Grignard reagent to form a tertiary alcohol, which can also react with another equivalent of the Grignard reagent to form triphenylmethanol.

Therefore, the three structures - benzoate esters, aldehydes, and ketones - react with different numbers of equivalents of the Grignard reagent, resulting in the formation of triphenylmethanol.

To know more about Grignard reagents, refer to the link below:

https://brainly.com/question/31483303#

#SPJ11

Several problems can happen if an air conditioner is operated in a house that is not properly sealed and insulated.

Higher energy costs may result from the air conditioner having to work harder to maintain the intended temperature.

Through fractures, gaps, and inadequately insulated walls, the cold air generated by the air conditioner may escape the home, causing uneven cooling and discomfort for the residents.

Learn more about air conditioner at:

https://brainly.com/question/13143746

#SPJ1

The correct choice is: The CaCO3 will not dissolve in water, but the KBr will dissolve. There is no change upon mixing the two flasks.

This is because calcium carbonate (CaCO3) is insoluble in water, while potassium bromide (KBr) is soluble in water. When water is added to the flask containing CaCO3, it will not dissolve, and the same will happen when water is added to the flask containing KBr. When the two mixtures are combined, there will be no reaction between the two compounds, so no precipitate will form. Therefore, the only compound remaining in the solution will be KBr.

Learn more about calcium carbonate here:

https://brainly.com/question/13565765

#SPJ11

When propane, C3H8, undergoes incomplete combustion in a limited amount of air, it does not have enough oxygen to fully react and produce carbon dioxide and water. Instead, it produces a mixture of carbon monoxide and water, making option A the correct answer.

Incomplete combustion occurs when there is not enough oxygen present to completely react with the fuel. This is a common occurrence in poorly ventilated areas, such as a home with a malfunctioning furnace or an improperly maintained gas stove. Propane is a common fuel used in homes for heating, cooking, and powering appliances, making it important to understand the potential hazards associated with incomplete combustion.Carbon monoxide, a colorless and odorless gas, is a dangerous byproduct of incomplete combustion that can be deadly if inhaled in high concentrations. It is important to have proper ventilation and carbon monoxide detectors installed in areas where propane is used to prevent the buildup of this toxic gas.In conclusion, when propane undergoes incomplete combustion in a limited amount of air, the most likely products formed are carbon monoxide and water, making option A the correct answer.

Learn more about propane here

https://brainly.com/question/23779346

#SPJ11

The three sloped portions in the heating curve of an ice-water mixture that is slowly heated to 125°C represent phase changes. Option D is correct.

The heating curve of a substance typically shows changes in temperature as heat is added or removed, while the substance undergoes phase changes. Phase changes occur when a substance transitions from one state of matter to another, such as from solid to liquid (melting), from liquid to gas (vaporization), or from solid directly to gas (sublimation).

The sloped portions in the heating curve represent the phase changes where the substance is either gaining or losing heat without changing temperature. These phase changes are also known as latent heat or enthalpy changes, as they involve the absorption or release of heat energy without causing a change in temperature.

Hence, D. is the correct option.

To know more about heating curve here

https://brainly.com/question/10481356

#SPJ1

--The given question is incomplete, the complete question is

"The heating curve of an ice-water mixture that is slowly heated to 125°C contains three sloped and two level portions. What do the three sloped portions in the graph represent? Responses A) sublimation B) heating C) deposition D) phase changes."--

To generate a buffer solution with a pH above 7, the correct answer would be NH3 (ammonia) and its corresponding salt, NH4Cl. A buffer solution is a solution that can resist changes in pH when small amounts of an acid or a base are added to it.

Buffers are typically composed of a weak acid and its corresponding conjugate base, or a weak base and its corresponding conjugate acid.
In the case of NH3, it acts as a weak base and can be used to generate a buffer solution with a pH above 7. When NH3 is added to water, it reacts with water to form ammonium ions (NH4+) and hydroxide ions (OH-):
NH3 + H2O → NH4+ + OH-
The ammonium ion acts as a weak acid, while the hydroxide ion acts as a strong base. By adding NH4Cl to the solution, we can ensure that the concentration of ammonium ions remains high, and the pH of the solution remains above 7.
In contrast, HCN (hydrogen cyanide) and KOH (potassium hydroxide) would not be suitable for generating a buffer solution with a pH above 7. HCN is a weak acid, and its corresponding salt (such as NaCN) would generate a buffer solution with a pH below 7. KOH is a strong base, and its corresponding salt (such as KCl) would not be able to generate a buffer solution at all.

To learn more about buffer solution, refer:-

https://brainly.com/question/24262133

#SPJ11

Endothermic bonds of the reactants are broken in this reaction. Exothermic bonds are formed in the product.

Reactants are substances that undergo chemical reactions to form products. They are the starting materials that are consumed during a chemical reaction. Reactants can be either a single element or a compound, and they typically interact with each other in specific ways to produce new chemical compounds.

In a chemical equation, reactants are written on the left side of the arrow, and products are written on the right side. The number of atoms and the type of atoms in the reactants and products must be equal, according to the law of conservation of mass. Chemical reactions occur when reactant molecules collide with sufficient energy to overcome the activation energy barrier. The reactants then rearrange their atoms to form new products with different properties.

To learn more about Reactants visit here:

brainly.com/question/13005466

#SPJ4

During the electrolysis of aqueous copper sulfate using stainless steel electrodes, following changes can be observed:

- A brown color formed at one electrode (the cathode)

- The indicator turned yellow at one electrode (the anode) and blue at the other electrode (the cathode)
- Copper was plated onto one of the electrodes (the cathode)
- Gas bubbles were visible at both electrodes, with twice as much gas being formed at the cathode compared to the anode.

Firstly, copper ions (Cu2+) are reduced at the cathode (negative electrode), resulting in the deposition of copper metal. This can be seen as a brown color forming on the cathode surface. Additionally, hydrogen gas is produced at the cathode due to the reduction of water molecules.
At the anode (positive electrode), the sulfate ions (SO42-) are oxidized, producing oxygen gas and releasing electrons. This can be seen as gas bubbles forming at the anode. However, since stainless steel is an inert material, it does not react with the sulfate ions, and therefore no brown color is formed on the anode surface.
The indicator used in this experiment is likely to be a pH indicator, which changes color depending on the acidity or basicity of the solution. At the cathode, the pH of the solution is likely to become more basic due to the production of hydroxide ions (OH-), resulting in the indicator turning blue. At the anode, the pH is likely to become more acidic due to the production of hydrogen ions (H+), resulting in the indicator turning yellow.
Therefore, the correct answers to the question are:
- A brown color formed at one electrode (the cathode)
- The indicator turned yellow at one electrode (the anode) and blue at the other electrode (the cathode)
- Copper was plated onto one of the electrodes (the cathode)
- Gas bubbles were visible at both electrodes, with twice as much gas being formed at the cathode (due to the production of hydrogen gas during the reduction of water molecules) compared to the anode (due to the production of oxygen gas during the oxidation of sulfate ions).

for more such question on electrolysis

https://brainly.com/question/24063038

#SPJ11

We can use Avogadro's number to convert the number of molecules to moles. Avogadro's number is 6.022 x 10^23 molecules per mole.

First, we need to determine how many moles of formic acid are represented by 4.01 x 10^25 molecules:

n = N / NA

where n is the number of moles, N is the number of molecules, and NA is Avogadro's number.

Substituting the given values, we get:

n = 4.01 x 10^25 / (6.022 x 10^23) = 66.6 moles

Therefore, the sample of formic acid contains 66.6 moles of formic acid.

27 moles of reactants chemically change into 34 moles of products. Option A

One or more chemicals, referred to as reactants, are transformed into one or more new substances, referred to as products, during a chemical reaction. Chemical bonds between atoms, ions, or molecules are broken and created during chemical reactions.

When  we look at the reaction, we can see that the statement that is true about the total number of reactants and the total number of products in the reaction 27 moles of reactants chemically change into 34 moles of products.

Learn more about reaction:https://brainly.com/question/9601381

#SPJ1

When distilling a peroxide-forming solvent, you should periodically test the distillate for peroxides and never distill the solvent pot to dryness. This ensures safety by monitoring peroxide levels and preventing potential hazards caused by high concentrations of peroxides.

When distilling a peroxide-forming solvent, it is important to periodically test the distillate for peroxides. Additionally, it is recommended to perform a low-pressure distillation with no heat and to never distill the solvent pot to dryness.

Distilling to dryness should only be done if you are certain an inhibitor is present.

This is because peroxide-forming solvents can produce dangerous peroxides when exposed to air or heat, so proper handling and disposal is crucial to prevent accidents.

Visit here to learn more about Solvents:

brainly.com/question/25326161

#SPJ11

(a) Ionic compounds have strong electrostatic forces of attraction and Covalent compounds have weaker forces of attraction between their molecules. (b) Ionic compounds are generally soluble in water, while covalent compounds are often insoluble in water. (c) Ionic compounds conduct electricity when dissolved in water or melted and Covalent compounds, do not conduct electricity.

Ionic and covalent compounds are two types of chemical compounds that differ in their properties. Here are the differences between ionic and covalent compounds based on three properties:

(a) Strength of forces between constituent elements: Ionic compounds are formed by the transfer of electrons from one atom to another, resulting in the formation of ions with opposite charges that are held together by strong electrostatic forces of attraction. Covalent compounds are formed by the sharing of electrons between atoms, resulting in the formation of molecules that are held together by weaker intermolecular forces.

(b) Solubility of compounds in water: Ionic compounds are generally soluble in water because they can dissociate into ions that can be hydrated by water molecules. Covalent compounds are generally insoluble in water because they do not dissociate into ions and are not attracted to water molecules.

(c) Electrical conduction in substances: Ionic compounds can conduct electricity when dissolved in water or when melted because the ions are free to move and carry an electric charge. Covalent compounds do not conduct electricity because they do not have free ions to carry an electric charge.

To know more about Ionic and covalent compounds, refer to the link below:

https://brainly.com/question/14451130#

#SPJ11

Calcium on reaction with water form calcium hydroxide which is sparingly soluble whereas the hydroxides of sodium and potassium are soluble in water.

Water reacts with calcium, magnesium, potassium, and sodium to form its hydroxide compounds. The amount of calcium hydroxide in water has changed.

Due to the compound's extremely poor solubility, calcium hydroxide appears opaque. In comparison to other oxides, calcium hydroxide has an extremely low Ksp (solubility product).

Magnesium, potassium, and sodium hydroxides are soluble in water. Therefore, these substances don't cause water to get hazy.

Because phenolphthalein is a basic substance, the solution turns pink when it is added. In a base, phenolphthalein has a pink colour; in an acid, it has no colour.

To know about calcium

https://brainly.com/question/9584549

#SPJ4