2. Determine the vector projection of vector (-4, 0, 7) onto vector (2, -1,5). [3K]

From the coterminal angles rule, the coterminal angles for 262° in terms of degrees are 622° and -98°.

The coterminal angles are defined as the angles that have the same initial side and the same terminal sides. It is calculated by simply adding or subtracting 360 and its multiples. For example, the coterminal angles of 20 degrees are 20° +360° = 380° or 20° - 360° = -340°. This process may be continue by adding or subtracting 360° each time. We have to determine the coterminal angles for 262° in degrees. Using the above discussed definition, the positive coterminal angles of 262° are obtained by adding 360°, see the attached figure 1, 262° + 360° = 622°

and the negative coterminal angles of 262° are obtained by substracting 360°, see the attached figure 2, X = 262° - 360° = -98°. Hence, required value are 622° and -98°.

For more information about coterminal angles, visit :

https://brainly.com/question/1989174

#SPJ4

Given that certain test scores are normally distributed with a mean of 150 and a standard deviation of 15.

We need to find the highest score in the targeted range if we want to target the lowest 10% of scores. In a normal distribution, the lowest 10% of scores means the scores below the 10th percentile. Since the normal distribution is symmetric, we can use the z-score to find the scores below the 10th percentile. The z-score formula is,  

z = (x - μ) / σ

where  x is the score, μ is the mean, and σ is the standard deviation.

To find the z-score that corresponds to the 10th percentile, we need to find the z-score such that the area to the left of the z-score is 0.10.Using a standard normal distribution table or calculator, we can find that the z-score corresponding to the 10th percentile is approximately -1.28.

To find the corresponding score, we use the formula of z-score.  

z = (x - μ) / σ

Rearranging the terms, we have,

x = z * σ + μ  x

= -1.28 * 15 + 150  

x = 130.8≈131

Hence, the highest score in the targeted range is approximately 131. Therefore, the correct option is e.

To know more about  standard deviation visit:-

https://brainly.com/question/30909342

#SPJ11

The reasonableness of assuming equal standard deviations depends on factors such as sample size, data distribution, and prior knowledge. It is important to assess these factors and make an informed decision based on the specific context and characteristics of the data being analyzed.

To determine whether it is reasonable to assume equal standard deviations when analyzing the data, we need to consider the nature of the data and the underlying assumptions of the statistical analysis method being used.

Assuming equal standard deviations means that we are assuming that the variability of the data is the same across all groups or populations being compared. This assumption is often made in statistical analyses such as analysis of variance (ANOVA) or t-tests when comparing means between groups.

Whether it is reasonable to assume equal standard deviations depends on the specific context and characteristics of the data. Here are a few factors to consider:

Sample size: If the sample sizes for each group or population being compared are similar, it may be more reasonable to assume equal standard deviations. Larger sample sizes provide more reliable estimates of the standard deviation and can help ensure that the assumption is met.

Similarity of data distribution: If the data in each group or population exhibit similar distributions and variability, assuming equal standard deviations may be reasonable. However, if the data distributions are visibly different or have varying levels of variability, assuming equal standard deviations may not be appropriate.

Prior knowledge or research: If there is prior knowledge or research suggesting that the standard deviations are likely to be equal across groups, it may be reasonable to make this assumption. However, if there is prior information indicating unequal standard deviations, it would be more appropriate to consider unequal standard deviations in the analysis.

Learn more about standard deviations

brainly.com/question/29115611

#SPJ11

The row operations performed on the given augmented matrix are as follows. (a) R3 → R3 - 2R1 + 13R2(b) R2 → -4R1 - R2, R3 → -7R1 + R3.

The given augmented matrix is as follows. \begin{bmatrix} 4 & 1 & 19 & -26\\ 7 & 5 & 27 & -10\\ -7 & 1 & 45 & 145 \end{bmatrix} .

Perform the row operations (a) R3 → R3 - 2R1 + 13R2 on the given matrix to get the following row echelon form.

\begin{bmatrix} 4 & 1 & 19 & -26\\ 7 & 5 & 27 & -10\\ 0 & 0 & 2 & 0 \end{bmatrix} .

Performing the row operation

(b) R2 → -4R1 - R2, R3 → -7R1 + R3 on the above row echelon form to get the following reduced row echelon form.

\begin {bmatrix} 4 & 1 & 19 & -26\\ 0 & -19 & -11 & 94\\ 0 & 0 & 2 & 0 \end{bmatrix} .

Hence, the row operations performed on the given augmented matrix are as follows.

(a) R3 → R3 - 2R1 + 13R2(b) R2 → -4R1 - R2, R3 → -7R1 + R3.

To know more about Matrix visit :

https://brainly.com/question/23863621

#SPJ11

The maximum value of the function f(x) = -2(x-1)(2x+3) is 7.5625.

To find the maximum value of the function f(x) = -2(x-1)(2x+3), we can determine the vertex of the quadratic function. The maximum value occurs at the vertex of the parabola.

First, let's expand the function:

f(x) = -2(x-1)(2x+3)

= -4x² - 10x + 6

We can see that the function is in the form of ax^2 + bx + c, where a = -4, b = -10, and c = 6.

The x-coordinate of the vertex can be found using the formula: x = -b / (2a).

Substituting the values, we have:

x = -(-10) / (2 ) (-4)

x = 10 / -8

x = -5/4

To find the corresponding y-coordinate (maximum value), we substitute this x-value back into the function:

f(-5/4) = -4(-5/4)² - 10(-5/4) + 6

= -4(25/16) + 50/4 + 6

= -25/4 + 50/4 + 6

= (50 - 25 + 96)/16

= 121/16

= 7.5625

Therefore, the maximum value of the function f(x) = -2(x-1)(2x+3) is 7.5625.

Learn more about Function here:

https://brainly.com/question/30721594

#SPJ1

$3.81

15 - 6.42 - 3.95 - 0.82 = 3.81

Answer:

x=2

Step-by-step explanation:

2*6, 3*6

Amy can share her 18 apples with her neighbors Beth and Carol in 68 different ways. To determine the number of ways Amy can share her apples, we can use the method of computing integer partitions.

An integer partition of a number represents a way of writing that number as a sum of positive integers, where the order of the integers does not matter. In this case, the number of apples represents the number to be partitioned.

First, we need to consider the partitions that do not exceed 7. We can have partitions such as (7, 7, 4), (7, 6, 5), (7, 6, 4, 1), and so on. By listing out all possible partitions, we can find that there are 29 partitions of 18 that do not exceed 7. However, this includes partitions where both Beth and Carol receive the same number of apples, which violates the condition given in the problem. To exclude these cases, we need to consider the partitions with distinct numbers. There are 21 such partitions.

Next, we need to consider the partitions where at least one of the numbers exceeds 7. These partitions can be obtained by subtracting 7 from the number of apples left and finding the partitions of the remaining number. For example, if one neighbor receives 8 apples, the remaining 10 apples can be partitioned in various ways. By repeating this process for each number exceeding 7, we find that there are 47 partitions in this case.

Therefore, the total number of ways Amy can share her 18 apples, while ensuring that Beth and Carol each get no more than 7 apples, is 21 + 47 = 68.

Learn more about integers here: brainly.com/question/1768254

#SPJ11

The critical number is x = 0, which is a local minimum. The function is increasing on (-∞, -√(2)/2) ∪ (0, √(2)/2) and decreasing on (-√(2)/2, 0) ∪ (√(2)/2, ∞). the function is concave down on the interval (-√(2)/2, 0) ∪ (√(2)/2, ∞).

(1) We have given f(x) = x4 – 4.3 + 4x2 + 1

First, we take the first derivative of the given function to find the critical numbers.

f'(x) = 4x³ + 8x

The critical numbers will be the values of x that make the first derivative equal to zero.

4x³ + 8x = 0

Factor out 4x from the left-hand side:

4x(x² + 2)

= 0

Set each factor equal to zero:

4x = 0x² + 2

= 0

Solve for x:

x = 0x²

= -2x

= ±√(-2)

The second solution does not provide a real number. Therefore, the critical number is x = 0.Now, we take the second derivative to identify the intervals where the function is increasing or decreasing.

f''(x) = 12x² + 8

Intervals where f is increasing or decreasing can be determined by finding the intervals where f''(x) is positive or negative.

f''(x) > 0 for  all

x ∈ (-∞, -√(2)/2) ∪ (0, √(2)/2)f''(x) < 0

for all x ∈ (-√(2)/2, 0) ∪ (√(2)/2, ∞)

Thus, the intervals where the function f is increasing and decreasing are:f is increasing on (-∞, -√(2)/2) ∪ (0, √(2)/2) f is decreasing on

(-√(2)/2, 0) ∪ (√(2)/2, ∞)(2)

To locate the local extrema of f, we need to consider the critical number and the end behavior of the function at its endpoints.

f(x) = x4 – 4.3 + 4x2 + 1

As x approaches negative infinity, f(x) approaches infinity.As x approaches positive infinity, f(x) approaches infinity.f(x) is negative at

x = 0.

Therefore, we know that there is a local minimum at x = 0.(3) We take the second derivative of the function to determine the intervals where f is concave up and concave down.

f''(x) = 12x² + 8f''(x) > 0

for  all x ∈ (-∞, -√(2)/2) ∪ (0, √(2)/2)

This means that the function is concave up on the interval

(-∞, -√(2)/2) ∪ (0, √(2)/2).

f''(x) < 0 for all x ∈ (-√(2)/2, 0) ∪ (√(2)/2, ∞)

This means that the function is concave down on the interval

(-√(2)/2, 0) ∪ (√(2)/2, ∞).

(4) Now, we can sketch the curve of the graph y = f(x). The graph is concave up on the interval (-∞, -√(2)/2) ∪ (0, √(2)/2) and concave down on the interval (-√(2)/2, 0) ∪ (√(2)/2, ∞).

The critical number is x = 0, which is a local minimum.

The function is increasing on (-∞, -√(2)/2) ∪ (0, √(2)/2) and decreasing on (-√(2)/2, 0) ∪ (√(2)/2, ∞).

To know more about intervals visit;

brainly.com/question/11051767

#SPJ11

The derivative of the function f(x) = 3 ln(x) is f'(x) = 3/x. The domain of f(x) consists of positive real numbers, excluding zero, as the natural logarithm is only defined for positive values. Thus, the domain of f(x) is (0, +∞) in interval notation.

To differentiate f(x) = 3 ln(x), we can use the derivative rules. The derivative of ln(x) is 1/x, and when multiplied by the constant 3, we get f'(x) = 3/x. This derivative represents the instantaneous rate of change of f(x) with respect to x at any given point.

The domain of f(x) is the set of values for x that produce meaningful output for the function.

In this case, the natural logarithm function ln(x) is only defined for positive values of x.

Therefore, the domain of f(x) consists of positive real numbers. However, it is important to note that the value x = 0 is not included in the domain, as the natural logarithm is undefined at x = 0.

Therefore, the domain of f(x) can be expressed as (0, +∞) in interval notation, indicating that it includes all positive real numbers except zero.

Learn more about Logarithm:

brainly.com/question/30226560

#SPJ11

The center of the circle (O) circumscribed around triangle ABC is located at the coordinates [tex](6,\frac{7}{2})[/tex].

What is the circumscribed circle?

The distinct circle that encircles a triangle's three vertices is known as the circumcircled circle. The point that is equally far from each of the three vertices is the circumcircle's center.

Using the idea of the circumcenter, we can determine the location of the center of the circle that is equidistant from the triangle ABC and has vertices A(0, 0), B(12, 7), and C(12, 0).

The intersection of the perpendicular bisectors of the triangle's sides will be used to get the circumcenter's coordinates.

1.Side AB:

Midpoint of   [tex]$AB = \left(\frac{0 + 12}{2}, \frac{0 + 7}{2}\right) = (6, \frac{7}{2})$[/tex]

Slope of  [tex]$AB = \frac{7 - 0}{12 - 0} = \frac{7}{12}$[/tex]

Slope of the perpendicular bisector = [tex]$-\frac{1}{\frac{7}{12}} = -\frac{12}{7}$[/tex]

The equation of the perpendicular bisector of AB can be expressed as: [tex]y - \frac{7}{2}[/tex] = [tex]-\frac{12}{7}(x-6)[/tex]

2. Side BC:

  Midpoint of BC =  [tex]\left(\frac{12 + 12}{2}, \frac{7 + 0}{2}\right) = (12, \frac{7}{2})$[/tex]

Slope of BC = [tex]\frac{{0 - 7}}{{12 - 0}} = \frac{{-7}}{{12}}[/tex] (undefined slope)

here BC is a vertical line,  so the equation of the perpendicular bisector is [tex]x=12\\[/tex]

3. Side CA:

 Midpoint of CA = [tex]\left(\frac{0 + 12}{2}, \frac{0 + 7}{2}\right) = (6, \frac{7}{2})$[/tex]

Slope of CA = [tex]$-\frac{1}{\frac{-7}{12}} = \frac{12}{7}$[/tex]

  Slope of the perpendicular bisector = [tex]\frac{0 - 7}{12 - 0} = \frac{-7}{12}$[/tex]

  The equation of the perpendicular bisector of CA can be expressed as:

[tex]y - \frac{7}{2}[/tex] = [tex]\frac{12}{7}(x-6)[/tex]

We may get the circumcenter's coordinates by resolving the equations that these perpendicular bisectors generate.

Please note that the midpoint of BC is the same location where the perpendicular bisectors of BC and CA connect (12, 7/2).

The circle (O) that encircles triangle ABC has the proper coordinates (6, 7/2) as its center.

The center of the circle (O) circumscribed around triangle ABC is located at the coordinates [tex](6, \frac{7}{2})[/tex].

To learn more about the circumscribed circle here:

https://brainly.com/question/14368399

#SPJ4

The Riemann sum for the function f(x) = x - 1 over the interval -6 ≤ x ≤ 4, with five subintervals and right endpoints as sample points, can be evaluated.

To evaluate the Riemann sum, we divide the interval into subintervals and calculate the sum of the areas of rectangles formed by the function and the width of each subinterval.

In this case, we have five subintervals: [-6, -2], [-2, 2], [2, 6], [6, 10], and [10, 14]. Since we are taking the right endpoints as sample points, the heights of the rectangles will be determined by the function values at the right endpoints of each subinterval.

We calculate the width of each subinterval as (b - a) / n, where n is the number of subintervals and (b - a) is the interval length (4 - (-6) = 10).

Then, we evaluate the function at each right endpoint and multiply it by the width of the corresponding subinterval. Finally, we sum up the areas of all the rectangles to get the Riemann sum.

Note: Since the specific values of the right endpoints and the widths of the subintervals are not provided, a numerical calculation is necessary to obtain the exact value of the Riemann sum.

Learn more about riemann sum: brainly.com/question/30241844

#SPJ11

The three positive consecutive even integers are 10, 12 and 14.

Find three positive consecutive even integers such that the product of the first and third is 8 more than 11 times the second

Let

x = first integer

Therefore,

x, x + 2, x + 4

x(x + 4) = 8 + 11(x + 2)

x² + 4x = 8 + 11x  + 22

x² + 4x - 11x - 8 - 22 = 0

x² + 7x - 30 = 0

x² - 3x + 10x - 30 = 0

x(x - 3) + 10(x - 3) = 0

(x - 3)(x + 10) = 0

Recall they are positive.

Therefore,

x = 10

10 + 2 = 12

12 + 2 = 14

Therefore, the integers are 10, 12 and 14.

learn more on integers here: https://brainly.com/question/21464041

#SPJ1

These coordinates are given by the following formulas:

[tex]\[\bar{x} = \frac{1}{M} \iiint_E x \cdot m(x, y, z) \,dV\][/tex]

[tex]\[\bar{y} = \frac{1}{M} \iiint_E y \cdot m(x, y, z) \,dV\][/tex]

[tex]\[\bar{z} = \frac{1}{M} \iiint_E z \cdot m(x, y, z) \,dV\][/tex]

A position established in relation to an object or system of objects is the centre of mass. It represents the system's average location as weighted by each component's mass.

To find the mass and center of mass of the solid (E) with the given density function, we need to integrate the density function over the volume of the solid.

The tetrahedron (E) is bounded by the planes (x = 0), (y = 0), (z = 0), and (xyz = 3). The density function is given as (m(x, y, z) = xyz).

To find the mass, we integrate the density function over the volume of the tetrahedron (E):

[tex]\[M = \iiint_E m(x, y, z) dV\][/tex]

Since the tetrahedron is defined by the bounds [tex]\(x = 0\), \(y = 0\), \(z = 0\)[/tex], and (xyz = 3), we can rewrite the integral in terms of these bounds:

[tex]\[M = \iiint_E xyz \,dV = \int_0^{\sqrt[3]{3}} \int_0^{\sqrt[3]{\frac{3}{x}}} \int_0^{\frac{3}{xy}} xyz \,dz \,dy \,dx\][/tex]

Evaluating this triple integral will give us the mass (M) of the solid.

To find the center of mass, we need to determine the coordinates [tex]\((\bar{x}, \bar{y}, \bar{z})\)[/tex] that represent the center of mass. These coordinates are given by the following formulas:

[tex]\[\bar{x} = \frac{1}{M} \iiint_E x \cdot m(x, y, z) \,dV\][/tex]

[tex]\[\bar{y} = \frac{1}{M} \iiint_E y \cdot m(x, y, z) \,dV\][/tex]

[tex]\[\bar{z} = \frac{1}{M} \iiint_E z \cdot m(x, y, z) \,dV\][/tex]

Learn more about center of mass on:

https://brainly.com/question/17088562

#SPJ4

Percent of newborn African lions weighing less than 3 pounds: 6.68%

Percent of newborn African lions weighing more than 3.8 pounds: 30.85%

Percent of newborn African lions weighing between 2.7 and 3.7 pounds: 58.65%

To find the percentage of newborn African lions that weigh less than 3 pounds, we need to calculate the probability associated with a Z-score less than the Z-score corresponding to a weight of 3 pounds.

First, we calculate the Z-score:

Z = (weight - mean) / standard deviation

Z = (3 - 3.6) / 0.4

Z = -1.5

Therefore, the percentage of newborn African lions weighing less than 3 pounds is approximately 0.0668 * 100 = 6.68%.

Similarly, to find the percentage of newborn African lions that weigh more than 3.8 pounds, we need to calculate the probability associated with a Z-score greater than the Z-score corresponding to a weight of 3.8 pounds.

Z = (weight - mean) / standard deviation

Z = (3.8 - 3.6) / 0.4

Z = 0.5

Looking up the probability associated with a Z-score of 0.5 in the standard normal distribution table, we find that it is approximately 0.6915. However, we want the probability of weights greater than 3.8 pounds, so we subtract this value from 1 to get the area to the right of the Z-score:

Probability = 1 - 0.6915 = 0.3085

Therefore, the percentage of newborn African lions weighing more than 3.8 pounds is approximately 0.3085 * 100 = 30.85%.

To find the percentage of newborn African lions that weigh between 2.7 and 3.7 pounds, we need to calculate the probability associated with Z-scores corresponding to these weights and then find the difference between the two probabilities.

Calculating the Z-scores:

For 2.7 pounds:

Z1 = (2.7 - 3.6) / 0.4

Z1 = -2.25

For 3.7 pounds:

Z2 = (3.7 - 3.6) / 0.4

Z2 = 0.25

Now we can look up the probabilities associated with these Z-scores in the standard normal distribution table. The probability associated with a Z-score of -2.25 is approximately 0.0122, and the probability associated with a Z-score of 0.25 is approximately 0.5987.

To find the probability of weights between 2.7 and 3.7 pounds, we subtract the probability associated with the smaller Z-score from the probability associated with the larger Z-score:

Probability = 0.5987 - 0.0122 = 0.5865

Therefore, the percentage of newborn African lions weighing between 2.7 and 3.7 pounds is approximately 0.5865 * 100 = 58.65%.

To know more about standard deviation here

https://brainly.com/question/16555520

#SPJ4

Complete Question:

The birth weights of African lions are normally distributed. The average birth weight of an

African lion is 3.6 pounds with a standard deviation of 0.4 pound.

1. What percent of newborn African lions weigh less than 3 pounds? Weigh more than 3.8 pounds?

Weigh between 2.7 and 3.7 pounds?

The given convex optimization problem aims to minimize the objective function, which is a quadratic term WERD1^T w'w2, subject to the constraint wr > 1. To derive the Lagrangian dual, we introduce the Lagrange multiplier X.

The Lagrangian function is constructed by adding the product of the Lagrange multiplier and the constraint to the objective function, resulting in L(w, X) = WERD1^T w'w2 + X(wr - 1). The Lagrangian dual is obtained by minimizing the Lagrangian function with respect to w while maximizing it with respect to X.

The Lagrangian dual is a powerful tool in optimization as it provides a way to transform a constrained optimization problem into an unconstrained one. In this case, introducing the Lagrange multiplier X allows us to incorporate the constraint wr > 1 into the objective function through the Lagrangian function L(w, X). By minimizing L(w, X) with respect to w and maximizing it with respect to X, we can find the optimal values of w and X that satisfy both the objective and the constraint. The Lagrangian dual thus provides insight into the trade-off between the objective and the constraint and helps us understand the duality between the primal and dual problems in convex optimization.

Learn more about Lagrangian dual :  brainly.com/question/30408879

#SPJ11

Answer:

10z

Step-by-step explanation:

it shows it on the page

The limit of the expression 2x/(5 + 3x) as x approaches infinity is 2/3.

To find the limit of the expression 2x/(5 + 3x) as x approaches a certain value, we need to analyze the behavior of the expression as x gets arbitrarily close to that value. Let's consider the limit as x approaches infinity.

To evaluate the limit, we substitute infinity into the expression:

lim(x→∞) 2x/(5 + 3x)

When we substitute infinity into the expression, we can see that the terms involving x dominate the expression. As x becomes larger and larger, the 3x term in the denominator becomes significantly larger than the constant term 5.

This leads to the following behavior:

lim(x→∞) 2x/(5 + 3x) ≈ 2x/(3x) = 2/3

Therefore, as x approaches infinity, the limit of the expression 2x/(5 + 3x) is 2/3.

In summary, the limit of the expression 2x/(5 + 3x) as x approaches infinity is 2/3.

Learn more about expression here

https://brainly.com/question/1859113

#SPJ11

To express vector p as a linear combination of vectors u, v, and w, we need to find coefficients (multipliers) for each vector such that p can be written as p = au + bv + cw, where a, b, and c are scalars.

Given vector p = [6 4 5], we will try to find coefficients that satisfy this equation.

Setting up the equation:

p = au + bv + cw

[6 4 5] = a[u1 u2 u3] + b[v1 v2 v3] + c[w1 w2 w3]

We can now form a system of equations based on the components of the vectors:

6 = au1 + bv1 + cw1 ...(1)

4 = au2 + bv2 + cw2 ...(2)

5 = au3 + bv3 + cw3 ...(3)

To determine whether there is a linear combination, we need to solve this system of equations. If there exists a solution (a, b, c) that satisfies all three equations, then p can be expressed as a linear combination of u, v, and w. Otherwise, if no solution exists, then there is no such linear combination.

Solving the system of equations will provide the coefficients (a, b, c) if they exist. However, without the values of u, v, and w, we cannot determine whether a solution exists for this specific case. Please provide the values of u, v, and w for further analysis.

Learn more about linear equations here

brainly.com/question/28307569

#SPJ11

The probability that X is between 12 and 96 is approximately 0.996.

We have,

Given that X has a mean of 54 and a standard deviation of 14, we can use the empirical rule to estimate the probability.

According to the empirical rule:

Approximately 68% of the data falls within one standard deviation of the mean.

Approximately 95% of the data falls within two standard deviations of the mean.

Approximately 99.7% of the data falls within three standard deviations of the mean.

In this case, since we have a normally distributed random variable with a known mean and standard deviation, we can estimate the probability as follows:

- Calculate the z-scores for the lower and upper limits:

For the lower limit of 12:

z1 = (12 - 54) / 14

For the upper limit of 96:

z2 = (96 - 54) / 14

- Look up the corresponding cumulative probabilities for the z-scores obtained from a standard normal distribution table or using a statistical calculator.

- Calculate the probability of X falling between 12 and 96 by subtracting the cumulative probability for the lower limit from the cumulative probability for the upper limit:

P(12 ≤ X ≤ 96) = P(X ≤ 96) - P(X ≤ 12)

Now,

z1 = (12 - 54) / 14 ≈ -2.857

z2 = (96 - 54) / 14 ≈ 3.000

Using a standard normal distribution table, we can find that the cumulative probability corresponding to z1 is approximately 0.002 and the cumulative probability corresponding to z2 is approximately 0.998.

P(12 ≤ X ≤ 96) = P(X ≤ 96) - P(X ≤ 12)

≈ 0.998 - 0.002

≈ 0.996

Therefore,

The probability that X is between 12 and 96 is approximately 0.996.

Learn more about normal distribution here:

https://brainly.com/question/31327019

#SPJ1

According to the 2010 General Social Survey, out of 1,259 US residents surveyed, 48% of the respondents indicated that they believed the use of marijuana should be made legal.

In the 2010 General Social Survey, a total of 1,259 US residents were surveyed, and they were asked about their opinion on the legalization of marijuana. The survey question specifically asked whether they believed the use of marijuana should be made legal or not.

Among the respondents, 48% expressed the view that marijuana should be made legal. This means that nearly half of the individuals surveyed were in favor of legalizing marijuana.

It's important to note that this information is specific to the 2010 General Social Survey and represents the responses collected from the sample of US residents during that time. The survey aimed to capture public opinion on the legalization of marijuana and provides insight into the perspectives held by the respondents surveyed.

To know more about Social Survey refer here:

https://brainly.com/question/11110169

#SPJ11

Substituting the values we found, the vector V becomes: V = (34 * cos(120°)) * i + (34 * sin(120°)) * j. To find the horizontal and vertical components of a vector given its length and direction, and write the vector in terms of the vectors i and j, we can use trigonometry.

Let's denote the vector as V and its horizontal component as Vx and vertical component as Vy. Given:

||V|| = 34 (length of the vector)

θ = 120° (direction of the vector)

To find Vx, we can use the formula Vx = ||V|| * cos(θ).

Vx = 34 * cos(120°).To find Vy, we can use the formula Vy = ||V|| * sin(θ).

Vy = 34 * sin(120°).

Now, to write the vector V in terms of the vectors i and j, we can express it as V = Vx * i + Vy * j.

Substituting the values we found, the vector V becomes:

V = (34 * cos(120°)) * i + (34 * sin(120°)) * j.

Please note that in this expression, i represents the unit vector in the horizontal direction, and j represents the unit vector in the vertical direction.

Learn more about vectors here: brainly.com/question/24256726

#SPJ11

The solution to the line coordinates is calculated as:

a) D = √34

b) (x, y) = (-5/2, 3/2)

c) Slope = -1.3

d) (x, y) = (-3, 3.5)

A) The formula for the distance between two coordinates is:

D = √[(y₂ - y₁)² + (x₂ - x₁)²)]

Thus, the distance between (-2, 5) and (3, 8) is:

D = √[(8 - 5)² + (3 + 2)²)]

D = √34

b) The formula for the coordinate of the midpoint between two coordinates is:

(x, y) = (x₂ - x₁)/2, (y₂ - y₁)/2

Thus:

(x, y) = (-4 - 1)/2, (-6 + 9)/2

(x, y) = (-5/2, 3/2)

c) The slope here is -1.3

d) The formula for the coordinate of the midpoint between two coordinates is:

(x, y) = (x₂ - x₁)/2, (y₂ - y₁)/2

Thus:

(x, y) = (-4 - 2)/2, (8 - 1)/2

(x, y) = (-3, 3.5)

Read more about Distance between two coordinates at: https://brainly.com/question/7243416

#SPJ1

The length of the adjacent leg is approximately 12.87 cm

What is a right triangle?

A right triangle is a particular kind of triangle with one angle that is precisely 90 degrees. The hypotenuse of a right triangle is the side across from the right angle, while the legs are the other two sides.

The trigonometric function tangent can be used to calculate the length of the neighbouring leg in a right triangle with a 25-degree angle and a 6 cm-long opposite limb.

The ratio of the adjacent side's length to the opposite side's length is known as the tangent of an angle. We need to determine the length of the next side in this situation because we know the opposite side's length (6 cm).

Let's use the tangent function:

tan(angle) = opposite/adjacent

tan(25°) = 6 cm/adjacent

To find the length of the adjacent side, we can rearrange the equation:

adjacent = opposite/tan(angle)

adjacent = 6 cm/tan(25°)

Using a scientific calculator, we can evaluate the tangent of 25 degrees:

tan(25°) ≈ 0.4663

Now we can substitute this value into the equation to find the length of the adjacent side:

adjacent = 6 cm/0.4663 ≈ 12.87 cm

Therefore, the length of the adjacent leg is approximately 12.87 cm.

To learn more about triangles follow the given link:

https://brainly.com/question/1058720

#SPJ4

Using the slope-intercept form of linear equation, the linear equation to this is k = 2.5h

A linear equation is one that has a degree of 1 as its maximum value. As a result, no variable in a linear equation has an exponent greater than 1. A linear equation's graph will always be a straight line.

To solve this problem, we just need to write an equation to model the problem.

The standard model of slope-intercept form is given as;

y = mx + c

In this problem, we can model this as;

k = 2.5h

Learn more linear equation here;

https://brainly.com/question/18831322

#SPJ1

Here is a real world problem involving square:

John wants to build a vegetable garden in his backyard. He has a square plot of land available with an area of 225 square meters. John wants to find the length of one side of the square garden.

Let's assume that the length of one side of the square garden is 's' meters.

Recall that the area of a square is given by the formula

A = s²,

where A is the area and s is the length of one side.

The area of the garden has been provided for us and is given as:

A = 225 square meters.

So we can write the equation:

225 = s²

To find the length of one side, we need to take the square root of both sides of the equation. Taking the square root of a perfect square will give us the exact side length.

√225 = √(s²)

15 = s

Therefore, the length of one side of the square garden is 15 meters.

Learn more about area of square here:

https://brainly.ph/question/110310

#SPJ1

The given integral [tex]\int\int\ {e^{x^2}} \, dx dy[/tex] can be evaluated by changing the order of integration as [tex]\int\int\ {e^{x^2}} \, dydx[/tex].

Given that :

[tex]\int\int\ {e^{x^2}} \, dx dy[/tex]

Here since the limits of the integration are not given, we can't evaluate the integral.

So instead of finding the value of the integral by first integrating with respect to x and then integrating with respect to y, we have to first integrate with respect to y and then integrate with respect to x.

So the order of the integral will become :

[tex]\int\int\ {e^{x^2}} \, dydx[/tex]

Hence the integral is [tex]\int\int\ {e^{x^2}} \, dydx[/tex]

Learn more about Order of Integration here :

https://brainly.com/question/30286960

#SPJ4

The value of a that makes v⃗ parallel to w⃗ is a = -4

What is parallel?

"Parallel" refers to two or more lines, vectors, or objects that have the same direction and will never intersect. In the context of vectors, two vectors are parallel if they have the same or opposite direction. Parallel vectors can be scalar multiples of each other, meaning one vector can be obtained by multiplying the other vector by a constant factor.

To find the value(s) of a that make v⃗ = 4ai⃗ - 3j⃗ parallel to w⃗ = a2i⃗ + 3j⃗, we need to determine when the two vectors have the same direction, i.e., their direction vectors are scalar multiples of each other.

The direction vector of v⃗ is (4a, -3), and the direction vector of w⃗ is (a^2, 3). For these vectors to be parallel, their corresponding components must be proportional.

Therefore, we can set up the proportion:

(4a) / (a^2) = (-3) / 3

Simplifying this equation:

4a / a^2 = -3 / 3

Dividing both sides by a:

4 / a = -1

Cross-multiplying:

4 = -a

Solving for a:

a = -4

So, the value of a that makes v⃗ parallel to w⃗ is a = -4.

To know more about parallel visit:

https://brainly.com/question/30195834

#SPJ4

The characteristics of the channel or transmission medium, and other factors related to the specific system being considered.

If we assume that the probability of error (the probability that the decoder will make a mistake) is greater than 0, then the probability that the decoder will know with certainty what the source bit was is 1 minus the probability of error.

Let's denote the probability of error as p_error. The probability that the decoder will know the source bit with certainty (probability of correct decoding) can be expressed as:

P_correct = 1 - p_error

Since we assume that p_error is greater than 0, the probability of correct decoding will be less than 1 but greater than 0.

It's important to note that this is a general concept and the specific value of p_error would depend on the decoding algorithm, the characteristics of the channel or transmission medium, and other factors related to the specific system being considered.

Learn more about probability

brainly.com/question/32117953

#SPJ11

Answer:

-7x-2y-10

Step-by-step explanation:

Add like terms. The coefficient is added together while the variable (x,y,z...ect) are what you use to match (i.e. x --> x or y --> y).