29. Training pilots in flight simulators because the simulators closely resemble the actual cockpits and flight characteristics of the airplane is an example of the learning principle of ______.
A. relevance
B. repetition
C. transference
D. feedback
E. participation

Answers

Answer 1

The learning principle being exemplified in training pilots in flight simulators is transference. Transference refers to the ability to apply previously learned knowledge or skills to new situations or contexts.

In this case, the knowledge and skills learned in the simulator can be transferred to actual cockpit situations, as the simulators closely resemble the real aircraft's cockpit and flight characteristics. The simulation creates a realistic experience for pilots to practice and learn in a safe and controlled environment before encountering the challenges and complexities of real-life situations. By repeatedly practicing in the simulator, pilots can develop muscle memory and increase their ability to make quick and accurate decisions when faced with unexpected circumstances. This type of training not only increases safety but also helps pilots to perform their duties with confidence and efficiency. Therefore, the principle of transference is essential in training pilots to effectively transfer their skills and knowledge from the simulator to the real world.

Learn More about skills here :-

https://brainly.com/question/19387936

#SPJ11


Related Questions

a. Donna donates stock in Chipper Corporation to the American Red Cross on September 10, 2015. She purchased the stock for $18,100 on December 28, 2014, and it had a fair market value of $27,000 when she made the donation.
The stock is treated as (capital gain or ordinary income) property and Donna's charitable contribution deduction is $ ______tax purposes.
b. Assume instead that the stock had a fair market value of $15,000 (rather than $27,000) when it was donated to the American Red Cross. Donna's charitable contribution deduction would be $_______ for tax purchases.

Answers

A) Donna's charitable contribution deduction would be equal to the fair market value of the stock, which is $27,000. b) Donna's charitable contribution deduction would be $15,000 for tax purposes

When Donna donates stock in Chipper Corporation to the American Red Cross, the tax implications of her donation depend on the fair market value of the stock at the time of the donation. In scenario A, Donna purchased the stock for $18,100 on December 28, 2014, and it had a fair market value of $27,000 when she made the donation on September 10, 2015.



In this case, Donna's charitable contribution deduction would be equal to the fair market value of the stock, which is $27,000. This is because she held the stock for more than one year, making it a long-term capital asset. When donating long-term capital assets, the deduction is generally equal to the fair market value of the asset.



In scenario B, if we assume that the stock had a fair market value of $15,000 (instead of $27,000) when it was donated, Donna's charitable contribution deduction would be $15,000 for tax purposes. The reason for this is the same as in scenario A: she held the stock for more than a year, making it a long-term capital asset, and the deduction is based on the fair market value at the time of the donation.



In both cases, it's important to note that the deduction may be subject to certain limitations based on Donna's adjusted gross income (AGI). However, for the purpose of this explanation, we have focused on the calculation of the deduction based on the fair market value of the donated stock.

Know more about Red Cross here:

https://brainly.com/question/28521369

#SPJ11

which statement is an example of predatory pricing?responsesa defense contractor gets its competitors to agree not to seek government work. a defense contractor gets its competitors to agree not to seek government work. a large furniture maker charges a price below production cost in order to eliminate small competitors

Answers

The statement that is an example of predatory pricing is a large furniture maker charges a price below production cost in order to eliminate small competitors. Option C is correct.

Predatory pricing occurs when a company lowers its prices below production costs with the intention of driving competitors out of the market, and then raising prices again once they have gained market dominance.

This is because the company is intentionally selling its products at a lower price than it costs to produce them, with the goal of driving smaller competitors out of the market. Once the competition has been eliminated, the company can then raise prices to a higher, more profitable level.

This practice is illegal in many countries because it is considered anti-competitive behavior.

Therefore, option C is correct.

which statement is an example of predatory pricing?responses

A. a defense contractor gets its competitors to agree not to seek government work.

B. a defense contractor gets its competitors to agree not to seek government work.

C. a large furniture maker charges a price below production cost in order to eliminate small competitors

Learn more about predatory pricing https://brainly.com/question/12751629

#SPJ11

Predatory pricing is exemplified by a large furniture maker charging below production costs to eliminate small competitors, aiming to gain market dominance by driving them out of business.

The statement that is an example of predatory pricing is: "A large furniture maker charges a price below production cost in order to eliminate small competitors."

Predatory pricing refers to a strategy where a company deliberately sets its prices below its production costs or the prices of its competitors, with the intention of driving them out of the market. By charging prices that are unsustainable for smaller competitors, the larger company aims to eliminate competition and gain a dominant market position.

Learn more about Predatory pricing: brainly.com/question/12751629

#SPJ11

Firms must be aware of goals other than short-term profit maximization. One area of concern should be social responsibility, which is the a.expectation that business will strive to improve the overall welfare of society. b.idea that organizations are solely responsible to local citizens. c. fact that court costs could impact the financial bottom line. d.idea that businesses are responsible for maintaining a healthy social climate for their omnis

Answers

Firms must be aware that

short-term profit maximization

should not be their only goal. They should also consider

social responsibility

, which is the expectation that businesses will work towards improving the overall welfare of society.

This means that businesses should not only focus on their

own financial success

, but also consider the impact they have on the environment, their employees, and the community they operate in.

Additionally, firms should be mindful that court costs could have a significant impact on their financial bottom line, which is why it is important to

prioritize ethical behavior

and responsible practices.

By recognizing their responsibility to maintain a

healthy social climate

, businesses can ensure that they are contributing to a sustainable and prosperous future for all.

To know more about

short-term profit maximization

here

https://brainly.com/question/26259096

#SPJ11

_____ use concrete experience and reflective observation and are good at generating ideas and seeing a situation from multiple perspectives.

Answers

People with a divergent thinking style use concrete experience and reflective observation and are good at generating ideas and seeing a situation from multiple perspectives.

The description provided in the question refers to individuals who possess characteristics of the "concrete experience" and "reflective observation" learning styles according to the Kolb Learning Style Inventory. These individuals tend to be more hands-on and prefer to learn by doing, as well as reflecting on their experiences to gain insights and new perspectives. They are often described as being creative, open-minded, and able to generate new ideas.

Learn more about reflecting here:

https://brainly.com/question/30270479

#SPJ11

What do you believe are the most pressing key forces in the outer-ring of their macro environment that TOMS’ top management team is facing today and why are those the most important? (7 points) If you took over the company, what changes would you pursue and why? Please provide a discussion about at least 3 ideas for improvement. (8 points)

Answers

Some of the most pressing key forces that TOMS' top management team is facing today are as follows:

1. Social & Environmental Responsibility: Consumers are becoming more aware of the impact of their purchases on the environment & society.

2. Competition: TOMS is facing stiff competition from other companies that are also offering sustainable & socially responsible products.

3. Technological Advancements: The rise of e-commerce & social media has made it easier for consumers to shop and interact with brands.

If I took over TOMS, I would pursue the following changes to improve the company's performance and strategic direction:

1. Diversify Product Offerings: While TOMS is well-known for its shoes, the company needs to expand its product offerings to appeal to a broader customer base.

2. Expand International Operations: TOMS has a global presence, but the company needs to expand its operations in key markets such as Europe & Asia.

3. Strengthen Digital Capabilities: TOMS needs to strengthen its digital capabilities to compete effectively in the digital age.

To know more about management-

brainly.com/question/30046222

#SPJ4

What are some key features of the SAP smart business key performance indicators tiles used for purchasing analytics

Answers

The SAP smart business key performance indicators (KPI) tiles used for purchasing analytics offer a range of key features that can help organizations improve their procurement processes. One of the key features of the KPI tiles is that they provide real-time data and insights into procurement performance, which enables decision-makers to make informed decisions quickly.

The tiles offer a customizable dashboard that can be tailored to an organization's specific needs and priorities, allowing them to focus on the metrics that matter most to them.

Another important feature of the SAP smart business KPI tiles is that they provide predictive analytics capabilities. By leveraging historical data and machine learning algorithms, the tiles can help organizations anticipate future trends and identify potential risks and opportunities. This can help organizations proactively manage their procurement processes and optimize their supply chain operations.

The KPI tiles also offer a range of visualization options, including charts, graphs, and heat maps, which can help users easily interpret and analyze data. The tiles can be accessed through a mobile app, making it easy for procurement professionals to stay connected and informed, no matter where they are.

Overall, the SAP smart business KPI tiles offer a powerful set of features that can help organizations improve their procurement processes and make data-driven decisions. By leveraging real-time data, predictive analytics, and customizable dashboards, organizations can optimize their supply chain operations and stay ahead of the competition.

Know more about key performance indicators here:

https://brainly.com/question/28283165

#SPJ11

58. A study of employees revealed that there were a number of areas of concern in regards to career planning, including all of the following except:
A. career equity.
B. supervisory concern.
C. awareness of opportunities.
D. career satisfaction.
E. job design.

Answers

The answer is B. Supervisory concern. The study found that employees were concerned about career equity, awareness of opportunities, career satisfaction, and job design. However, supervisory concern was not identified as a significant area of concern in regard to career planning.


Based on the given options, the one that is not directly related to career planning concerns would be B. supervisory concern. This term is more focused on the relationship between supervisors and employees, rather than the employee's individual career planning process.

to know more about supervisory concerns here:

brainly.com/question/30753003

#SPJ11

please slove this question please Part A Discuss the retirement benefits offered by government for employees in detail. Explain in which category of funds are these benefits accounted for and why? Part B 1. Prepare Appropriations. Encumbrances, Expenditure and Fund Balance Ledger from the following information Jan 1 Jan 10 Feb 1 March 1 March 15 April Ministry of Finance made an appropriation of OMRIS00,000 to College of Medicine. The College issued a purchase order, for medical supplies (OMRX0,000) and two latest machineries for the Surgical department (OMR 150.000 cach) General operating expenditure incurred and paid OMR15.000 The college received 40% of the supplies along with a voucher of OMR30,000. The supplier delivery one machinery along with a voucher OMR150,000 The college entered into a contract with MHD Consulting for constructing a recreational center in the college. An amount of OMR500.000 is allocated towards the contract. The work is expected to be completed by the end of the year. Construction is certified to complete 10% and the contractor has submited a voucher for OMR50,000. Payment is made based on the voucher 50% of the supplies ordered on January 10 was received. The voucher stated the amount OMR 40.000. Payment is immediately processed The supplier of the machinery informed their inability to supply the second machinery. Hence the contract is cancelled. Operating expenditure paid OMR 80,000 May 10 June 1 July 10 August

Answers

The government provides retirement benefits for employees to ensure that they have financial security after they retire from their jobs. In Oman, the retirement benefits for government employees include a pension plan, a gratuity payment, and an end-of-service benefit.

The pension plan is a defined benefit plan that provides a fixed monthly payment to employees after they retire. The amount of the pension payment is based on the employee's salary and years of service.

The gratuity payment is a lump sum payment that is made to employees who have completed a certain number of years of service. The amount of the gratuity payment is based on the employee's salary and years of service.

The end-of-service benefit is also a lump sum payment that is made to employees who have completed a certain number of years of service. The amount of the end-of-service benefit is based on the employee's salary and years of service.

These retirement benefits are accounted for in the government's pension fund, which is a type of trust fund. The pension fund is set up to provide retirement benefits to government employees and is funded by contributions from the government and employees. The pension fund is managed by a board of trustees who are responsible for investing the fund's assets to ensure that there are sufficient funds to pay retirement benefits to employees.

Part B:

Appropriations Ledger:

Jan 1: Ministry of Finance appropriation - OMR 1,000,000

Encumbrances Ledger:

Jan 10: Medical supplies purchase order - OMR 60,000

Feb 1: Surgical department machinery purchase order - OMR 300,000

July 10: Recreational center construction contract - OMR 500,000

Expenditure Ledger:

March 1: General operating expenditure - OMR 15,000

March 15: Medical supplies received - OMR 30,000

March 15: First machinery received - OMR 150,000

June 1: Payment for 50% of supplies ordered on Jan 10 - OMR 40,000

June 1: Operating expenditure - OMR 80,000

August: Payment for construction contract completion - OMR 50,000

Fund Balance Ledger:

Jan 1: Fund balance - OMR 1,000,000

March 1: Fund balance - OMR 985,000

March 15: Fund balance - OMR 805,000

June 1: Fund balance - OMR 725,000

August: Fund balance - OMR 675,000

Learn more about  retirement benefits

https://brainly.com/question/31284848

#SPJ4

Part A: Retirement benefits offered by the government for employees typically include pension plans, health insurance, life insurance, and other benefits. Pension plans are the primary retirement benefit offered by most governments, and they provide a fixed amount of income to retired employees based on their years of service and salary.

Health insurance and life insurance benefits may also be provided to retired employees, although the specifics of these benefits may vary depending on the government and the employee's position.

These retirement benefits are usually accounted for in a separate category of funds known as pension funds or retirement benefit funds. These funds are designed to hold the assets needed to pay retirement benefits to employees. The funds are typically managed by a board of trustees or other fiduciaries who are responsible for investing the assets of the fund to maximize returns while minimizing risk. The funds are required to follow specific accounting and reporting standards to ensure transparency and accountability in the management of the assets.

Part B: Jan 1: Ministry of Finance made an appropriation of OMR 1,000,000 to the College of Medicine.

Jan 10: The College issued a purchase order for medical supplies (OMR 100,000) and two latest machineries for the Surgical department (OMR 150,000 each).

Feb 1: General operating expenditure incurred and paid OMR 15,000.

March 1: The college received 40% of the supplies along with a voucher of OMR 30,000.

March 15: The supplier delivered one machinery along with a voucher OMR 150,000.

March: The college entered into a contract with MHD Consulting for constructing a recreational center in the college. An amount of OMR 500,000 is allocated towards the contract. The work is expected to be completed by the end of the year.

April: Construction is certified to complete 10% and the contractor has submitted a voucher for OMR 50,000. Payment is made based on the voucher.

April: 50% of the supplies ordered on January 10 were received. The voucher stated the amount OMR 40,000. Payment is immediately processed.

April: The supplier of the machinery informed their inability to supply the second machinery. Hence the contract is canceled.

April: Operating expenditure paid OMR 80,000.

May 10:

June 1:

July 10:

August:

Ledger Accounts:

Appropriations Ledger:

Jan 1: College of Medicine - OMR 1,000,000

Encumbrances Ledger:

Jan 10: Medical supplies - OMR 100,000

Jan 10: Surgical machinery (1) - OMR 150,000

Jan 10: Surgical machinery (2) - OMR 150,000

Expenditure Ledger:

Feb 1: General operating expenditure - OMR 15,000

March 15: Surgical machinery (1) - OMR 150,000

April: Medical supplies - OMR 40,000

April: General operating expenditure - OMR 80,000

Fund Balance Ledger:

Jan 1: College of Medicine - OMR 1,000,000

March 1: College of Medicine - OMR 930,000

April: College of Medicine - OMR 760,000

April: College of Medicine - OMR 630,000

Note: The ledger accounts for May 10 to August are not provided, so the ledger entries cannot be made for these dates.

Learn more about “ ledger accounts “ visit here;

https://brainly.com/question/5720744

#SPJ4

Complete the table and then use the information to answer the question(s) below.Quantity consumed Total utility Marginal utility1 32 322 123 52 4 5Budget line:Budget line shows the combination of two goods that can be purchased by a consumer with the given level of money income. The slope of budget line is the ratio of two goods price. It has a negative slope.

Answers

The total utility represents the satisfaction gained from consuming a certain quantity of a good.

First, let's complete the table:

Quantity Consumed | Total Utility | Marginal Utility
------------------|---------------|-----------------
       1         |       32      |        32
       2         |       64      |        32
       3         |       84      |        20
       4         |       89      |         5

Now, let's answer the question using the given terms:

A budget line represents the possible combinations of two goods a consumer can buy given their income level and the prices of the goods. The negative slope of the budget line indicates that as the quantity of one good increases, the quantity of the other good must decrease, given a fixed income.

In this scenario, the total utility represents the satisfaction gained from consuming a certain quantity of a good. Marginal utility measures the additional satisfaction gained from consuming one more unit of the good. As the quantity consumed increases, the marginal utility generally decreases, which indicates diminishing marginal utility. In this table, we can see that as the quantity consumed increases, the marginal utility declines from 32 to 5. This information can help a consumer make decisions on how to allocate their income optimally based on the satisfaction they derive from consuming different goods, while staying within their budget constraints.

For more about total utility:

https://brainly.com/question/14597445

#SPJ4

Question 1Which of the following is true about an organization with astable external environment and readily available resources?Group of answer choicesLess coordination and communication are needed among people andfunctions to obtain resources.Managers face greater problems in trying to gain access toresources.Managers typically make organizing choices that result in moreflexible structures.Authority is likely to be decentralized.Question2A _____refers to an organizational structure composed of all thedepartments that an organization requires to produce its goods orservices.Group of answer choicesproduct structurematrix structureproduct team structurefunctional structureQuestion3Danielle works for a large company in the petroleum industry. Itis a centralized organization with many levels of authority. Which of thefollowing is a characteristic of the company's organizationalculture?Group of answer choicesIt gives people more personal autonomy.It ignores traditions.It lays emphasis on obeying authority.It decentralizes authority.Question4_____ refers to the shared set of beliefs, values, and normsthat influence how people and groups work together to achieve organizationallygoals.Group of answer choicesOrganizational structureOrganizational cultureOrganizational hierarchyOrganizational effectivenessQuestion5Which of the following is the first step of the controlprocess?Group of answer choicesmeasuring actual performancecomparing actual performance against chosen standardsevaluating the results of comparisonestablishing the standards of performanceQuestion6Why is return on investment (ROI) the most commonly usedfinancial performance measure?Group of answer choicesIt measures how efficiently managers are collecting revenuesfrom customers to pay expenses.It shows whether organizations can pay claims of short-termcreditors without selling inventory.It measures how efficiently managers are turning inventory over.It allows managers of one organization to compare performancewith that of other organizations.Question7Which of the following provides a framework to monitor progresstoward achieving goals?Group of answer choicesmanagement by objectivesdirect supervisionclan controloutput controlQuestion8Which of the following types of change is rapid, dramatic, andbroadly focused?Group of answer choicescultural changestructural changerevolutionary changeevolutionary changeQuestion9_____ includes all the activities managers engage in to attractand retain employees and to ensure that they perform at a high level andcontribute to the accomplishment of organizational goals.Group of answer choicesProduct managementHuman resource managementTotal quality managementDistribution managementQuestion10Which of the following components of the HRM system serves adevelopmental purpose by providing employees valuable information about theirstrengths and weaknesses?Group of answer choicesrecruitment and selectionlabor relationsperformance appraisal and feedbacktraining and development

Answers

1. In an organization with a stable external environment and readily available resources, it is true that less coordination and communication are needed among people and functions to obtain resources.
2. A functional structure refers to an organizational structure composed of all the departments that an organization requires to produce its goods or services.
3. In a centralized organization with many levels of authority like the one Danielle works for, a characteristic of the company's organizational culture is that it lays emphasis on obeying authority.


4. Organizational culture refers to the shared set of beliefs, values, and norms that influence how people and groups work together to achieve organizationally goals.

5. The first step of the control process is establishing the standards of performance.
6. Return on investment (ROI) is the most commonly used financial performance measure because it allows managers of one organization to compare performance with that of other organizations.
7. Management by objectives provides a framework to monitor progress toward achieving goals.


8. Revolutionary change is the type of change that is rapid, dramatic, and broadly focused.
9. Human resource management includes all the activities managers engage in to attract and retain employees and to ensure that they perform at a high level and contribute to the accomplishment of organizational goals.
10. The performance appraisal and feedback component of the HRM system serves a developmental purpose by providing employees valuable information about their strengths and weaknesses.

To know more about communication  click here

brainly.com/question/29811467

#SPJ11

TRUE OR FALSE: Depending on the complexity of
the work of an auditor and the professional fee they were provided,
the kind of opinion they may issue varies.

Answers

The given statement "Depending on the complexity of the work of an auditor and the professional fee they were provided, the kind of opinion they may issue varies." is true. The type of opinion an auditor may issue can be influenced by several factors, including the complexity of the work involved and the professional fee they are provided.

In general, an auditor's opinion is a professional judgment that expresses their level of assurance about the financial statements of an organization. If the work of an auditor is straightforward and relatively simple, they may be able to provide an unqualified opinion. This means that the auditor has no significant concerns about the financial statements and believes that they accurately reflect the financial position of the organization. However, if the work is more complex or the financial statements are more difficult to verify, the auditor may need to provide a qualified opinion. This means that there are some issues or limitations in the financial statements that prevent the auditor from providing an unqualified opinion.

Additionally, the professional fee that an auditor is provided can also affect the type of opinion they may issue. If the fee is low and the work is complex, the auditor may not have enough resources to conduct a thorough investigation and may need to issue a qualified opinion. On the other hand, if the fee is high and the work is relatively simple, the auditor may have more resources and be able to provide an unqualified opinion.

In conclusion, the complexity of the work and the professional fee an auditor is provided can impact the type of opinion they may issue. It is important for auditors to conduct a thorough investigation and provide an appropriate opinion based on their professional judgment.Therefore, the statement given is true.

To know more about auditors, visit https://brainly.com/question/28103559

#SPJ11

having unrivaled access to capital would be considered which of the following? group of answer choices a marketing objective unrelated diversification competitive advantage innovation

Answers

The correct answer is competitive advantage.

Having unrivaled access to capital means that a company has a unique ability to secure funds, whether through investments, loans, or internal resources. This is considered a competitive advantage because it allows the company to invest in new projects, improve existing products or services, and potentially outpace its competitors in the market.


A competitive advantage is a unique benefit or attribute that a company possesses, enabling it to outperform its competitors. In this case, having access to capital provides the company with the financial means to take advantage of opportunities and stay ahead of the competition. This is different from a marketing objective, which is a specific goal that a company aims to achieve through marketing efforts, such as increasing brand awareness or boosting sales.


Unrelated diversification
is a business strategy in which a company expands into industries unrelated to its core business. This is not applicable in this context, as having access to capital is a resource, not a diversification strategy. Innovation refers to the creation and implementation of new ideas, products, or services that can create value for a company. While having access to capital can support innovation, it is not innovation in itself.

Having unrivaled access to capital would be considered which of the following: a marketing objective, unrelated diversification, competitive advantage, or innovation?

To know more about competitive advantage refer here:

https://brainly.com/question/31367489#

#SPJ11

does transformational leadership affect the performance of employees who report to the leader?

Answers

Yes, transformational leadership does affect the performance of employees who report to the leader. This leadership style has been found to be positively related to employee performance in various studies. In fact, transformational leaders are known to inspire their employees to exceed their own expectations and achieve more than they thought possible.

Transformational leadership is a leadership style that emphasizes the importance of inspiring and motivating employees to achieve their full potential. This style of leadership focuses on creating a positive workplace environment that fosters creativity, innovation, and teamwork. Transformational leaders inspire their employees to take ownership of their work, set challenging goals, and strive for excellence.

Transformational leaders are known to foster a sense of ownership among employees, which can increase their motivation and commitment to the organization. By inspiring and motivating employees to achieve their full potential, transformational leaders can improve the overall performance of their teams. In addition, transformational leaders are able to create a positive workplace culture that fosters collaboration and innovation, which can lead to better results for the organization as a whole.

To know more about Transformational Leadership visit:

https://brainly.com/question/29220943

#SPJ11

A firm has conducted market research and found that customer satisfaction with its product is quite high. Nonetheless, repurchase behavior is very low. The research design evidently has a problem with
a) secondary data.
b) reliability.
c) validity.
d) reporting findings.
e) generalizability.

Answers

The research design evidently has a problem with validity. Validity refers to the accuracy and truthfulness of research findings. In this scenario, the firm has found that customer satisfaction with its product is high, but there is a low repurchase behavior.

This indicates that the research may not have captured the true behavior of customers accurately. It is possible that customers may be satisfied with the product, but they may not see a need to repurchase it. Alternatively, the research may have used flawed measures or methods to measure repurchase behavior. Therefore, the research lacks validity as it may not be capturing the true behavior of customers. This highlights the importance of conducting research that is not only reliable but also valid to ensure that the results obtained are accurate and can be trusted. In conclusion, to address this problem, the firm needs to revisit its research methods and measures to ensure that they are valid and can accurately capture customer behavior.

Know more about Validity here:

https://brainly.com/question/13012369

#SPJ11

which of the following is not normally a preference given to the holders of preferred stock? multiple choice the right to receive a specified amount of dividends prior any being paid to common stockholders. the right to vote before the common stockholders at the corporation's annual meeting. the right to receive preference over common stockholders as to the distribution of assets during a liquidation process. all of these are preferences given to preferred stock.

Answers

The statement that is not normally a preference given to the holders of preferred stock is the right to vote before the common stockholders at the corporation's annual meeting. Option B is correct.

Preferred stockholders typically do not have the right to vote before common stockholders at the corporation's annual meeting.

While preferred stockholders have certain preferences, such as the right to receive a specified amount of dividends prior to any being paid to common stockholders and the right to receive preference over common stockholders as to the distribution of assets during a liquidation process, they usually do not have voting rights equivalent to common stockholders.

Therefore, option B is correct.

which of the following is not normally a preference given to the holders of preferred stock? multiple choice

A. the right to receive a specified amount of dividends prior any being paid to common stockholders.

B. the right to vote before the common stockholders at the corporation's annual meeting.

C. the right to receive preference over common stockholders as to the distribution of assets during a liquidation process.

D. all of these are preferences given to preferred stock.

Learn more about preferred stock https://brainly.com/question/15078323

#SPJ11

a failure to protect employees from hazards is one of the top four most frequently cited concrete and masonary violations. (True or False)

Answers

True, a failure to protect employees from hazards is indeed one of the top four most frequently cited concrete and masonry violations. Ensuring the safety of workers in the construction industry is crucial, as they are often exposed to various hazards that can lead to accidents and injuries.

To minimize these risks, companies must adhere to safety regulations and guidelines provided by authorities such as the Occupational Safety and Health Administration (OSHA). By doing so, they can effectively prevent accidents, protect their employees, and maintain a safe working environment.

When companies do not follow these guidelines, they can be cited for violations, and the failure to protect employees from hazards is one of the most common violations within the concrete and masonry sector.

Other common violations may include inadequate fall protection, lack of proper personal protective equipment, and insufficient training on hazard recognition and prevention.

It is essential for companies to prioritize the safety of their employees by implementing appropriate measures to reduce and prevent hazards. This not only benefits the workers but also contributes to the overall success and reputation of the company.

In summary, the statement "a failure to protect employees from hazards is one of the top four most frequently cited concrete and masonry violations" is true, emphasizing the importance of maintaining a safe work environment and following safety guidelines in the construction industry.

To know more about masonry violations refer here

https://brainly.com/question/4506535#

#SPJ11

What are the key steps or stages of customer life cycle management (CLM)?

A Introduction, acquisition, conversion, and loyalty
B Identifying, gaining, managing, and keeping customers
C Introduction, growth, maturity, and decline
D Reach, acquire, maintain, and grow

Answers

The key steps or stages of customer life cycle management (CLM) can best be described using option D: Reach, Acquire, Maintain, and Grow.

1. Reach: This is the initial stage where a business tries to create awareness about its products or services and engage potential customers.
2. Acquire: In this stage, the business works on converting potential customers into actual customers by persuading them to purchase the products or services.
3. Maintain: The focus in this stage is on retaining existing customers by providing excellent customer service and meeting their ongoing needs.
4. Grow: The final stage is about deepening the relationship with existing customers and encouraging them to continue purchasing, upgrading, or buying additional products and services, ultimately increasing their lifetime value to the business.

Learn more about persuading here:

https://brainly.com/question/29564994

#SPJ11

M Inc., a Canadian public corporation, carries on business
across Canada. In the current year M Inc. has taxable income of
$200,000. What is the amount of federal tax payable?
Please answer ASAP. Than

Answers

In Canada, federal tax rates for corporations are based on a flat rate system. As of 2021, the federal tax rate for corporations in Canada is 15%. Therefore, if M Inc. has a taxable income of $200,000, the amount of federal tax payable would be calculated as follows:

$200,000 x 15% = $30,000

Therefore, M Inc. would be required to pay $30,000 in federal tax for the current year.

It's worth noting that this calculation only takes into account federal taxes. Depending on the province or territory in which M Inc. operates, it may also be subject to provincial or territorial taxes, which would increase the total amount of tax payable.

In summary, the amount of federal tax payable by M Inc. with a taxable income of $200,000 is $30,000.

Learn more about Federal Tax: https://brainly.com/question/30239031

#SPJ11      

     

If margin of safety ratio is 50% and sales increased by 45%, operating income will increase by: a. 50% b. 45% *
c. 8096 d. None of the choices given. e.90%

Answers

d. None of the choices given, The operating income will increase, but we cannot determine by how much based on the information given.

The margin of safety ratio is a measure of how much sales can decrease before a company starts operating at a loss. It is calculated by subtracting the break-even point from actual sales and then dividing the result by actual sales. If the margin of safety ratio is 50%, it means that sales can decrease by 50% before the company starts operating at a loss.

Now, if sales increase by 45%, the operating income will not increase by the same percentage because the margin of safety ratio is already at 50%. Operating income will only increase by the percentage of the increase in sales that exceeds the margin of safety ratio. In this case, the increase in sales (45%) is less than the margin of safety ratio (50%), so the answer options a, b, c, and e are incorrect.

To know more about operating income visit:

https://brainly.com/question/31591698

#SPJ11

"
"A balanced system is
A. one where all four management systems are equal
B. logistics expenses are equal to cost of goods sold
C. another name for supply chain management
D. inbound and outbound flows are nearly equal

Answers

The correct answer is D. A balanced system is inbound and outbound flows are nearly equal.

A balanced system is a system where inbound and outbound flows are nearly equal. This means that the amount of goods and materials coming into the system is roughly the same as the amount leaving the system. This is important for maintaining efficiency and avoiding bottlenecks or delays in the supply chain.

A balanced system refers to a system where the inflow and outflow of resources, materials, or products are approximately equal. In the context of logistics and supply chain management, a balanced system means that the inbound and outbound logistics flows are in balance. This balance helps to ensure that the supply chain operates efficiently, minimizing waste, reducing costs, and improving customer satisfaction.

To know more about flows visit :-

https://brainly.com/question/30809255

#SPJ11

Which of the following would be included in cash and cash equivalents on the balance sheet?
a. certificates of deposit
b. bank overdrafts
c. commercial paper
d. postage stamps

Answers

a. Certificates of deposit would be included in cash and cash equivalents on the balance sheet.

Cash and cash equivalents are short-term, highly liquid investments that can be easily converted into cash within three months or less. Certificates of deposit (CDs) are a type of time deposit with a bank that can be redeemed for cash upon maturity or sold in the secondary market. Since CDs can be easily converted into cash within three months or less, they are considered cash equivalents and would be included in this category on the balance sheet.

b. Bank overdrafts would not be included in cash and cash equivalents.

Bank overdrafts represent a negative balance in a bank account, indicating that the account holder has withdrawn more money than is available in the account. Since bank overdrafts are a liability, they are not included in cash and cash equivalents on the balance sheet.

c. Commercial paper would not be included in cash and cash equivalents.

Commercial paper is a type of unsecured, short-term debt issued by companies to finance their short-term liquidity needs. While commercial paper is a liquid investment that can be easily sold in the secondary market, it is not considered a cash equivalent because it has a maturity longer than three months.

d. Postage stamps would not be included in cash and cash equivalents.

Postage stamps are a non-monetary asset and therefore would not be included in cash and cash equivalents on the balance sheet.

To know more about balance sheet refer here

https://brainly.com/question/26323001#

#SPJ11

fantabulous products sells 2,000 kayaks per year at a price of $450 per unit. fantabulous sells in a highly competitive market and uses target pricing. the company has $1,000,000 of assets and the shareholders wish to make a profit of 18% on assets fixed costs are 500000 per year and cannot be reduced how much is target variable costs

Answers

The target variable costs for Fantabulous Products is $220,000 per year.

To find the target variable costs, we will use the following terms:

Annual sales of kayaks: 2,000 units

Price per unit: $450

Target profit on assets: 18%

Fixed costs: $500,000

Total assets: $1,000,000

1: Calculate the target profit

Target profit = Total assets * Target profit on assets

Target profit = $1,000,000 * 0.18

Target profit = $180,000

2: Calculate total revenue

Total revenue = Annual sales * Price per unit

Total revenue = 2,000 * $450

Total revenue = $900,000

3: Calculate the target total costs

Target total costs = Total revenue - Target profit

Target total costs = $900,000 - $180,000

Target total costs = $720,000

4: Calculate the target variable costs

Target variable costs = Target total costs - Fixed costs

Target variable costs = $720,000 - $500,000

Target variable costs = $220,000

So, the target variable costs is $220,000 per year.

Learn more about Variable costs:

https://brainly.com/question/28481161

#SPJ11

the wet corporation has an investment project that will reduce expenses by $25,000 per year for three years. the project's cost is $55,000. if the asset is part of the three-year macrs category (33% first year depreciation) and the company's combined tax rate is 25%, what is the cash flow from the project in year 1?

Answers

The cash flow from the project in year 1 is $20,462.50.

To calculate the cash flow from the project in year 1, we need to determine the depreciation expense for the asset in the first year.

Since the asset is part of the three-year MACRS category with 33% first-year depreciation, we can calculate the depreciation expense as follows:

Depreciation Expense Year 1 = $55,000 x 0.33 = $18,150

Next, we need to calculate the tax savings resulting from the depreciation expense.

Tax Savings Year 1 = Depreciation Expense Year 1 x Combined Tax Rate = $18,150 x 0.25 = $4,537.50

Finally, we can calculate the cash flow from the project in year 1 by subtracting the tax savings from the reduction in expenses:

Cash Flow Year 1 = Expense Reduction - Tax Savings Year 1 = $25,000 - $4,537.50 = $20,462.50

Therefore, the cash flow is $20,462.50.

Learn more about Cash flow:

https://brainly.com/question/30393117

#SPJ11

Indicate how each of the accounts listed are increased. Selections may be used once, more than once, or not at all.
A. Debit
B. Credit
selectAB 1. Sales Returns and Allowances
selectAB 2. Sales Revenue
selectAB 3. Allowance for Doubtful Accounts
selectAB 4. Sales Discounts

Answers

The answer is 1. Sales Returns and Allowances Debit 2. Sales Revenue Credit 3. Allowance for Doubtful Accounts Credit 4. Sales Discounts Debit.

Here's how each of the accounts listed are increased:
1. Sales Returns and Allowances: This account is increased with a Debit (A).
2. Sales Revenue: This account is increased with a Credit (B).
3. Allowance for Doubtful Accounts: This account is increased with a Credit (B).
4. Sales Discounts: This account is increased with a Debit (A).

A sales return is when a customer or client sends a product back to the seller. A customer may return an item for several reasons, including Excess quantity: A customer may have ordered more items than they need, or a company may have accidentally sent additional products.

Sales revenue is the income received by a company from its sales of goods or the provision of services. In accounting, the terms “sales” and “revenue” can be, and often are, used interchangeably to mean the same thing. It is important to note that revenue does not necessarily mean cash received.

An allowance for doubtful accounts is considered a “contra asset,” because it reduces the amount of an asset, in this case the accounts receivable.

Learn more about sales discount here: https://brainly.com/question/7459025

#SPJ11

Arrange in sequence the records lifecycle?

Creation
Maintenance and Use
Disposition

Answers

The sequence of the records lifecycle is as follows: Creation, Maintenance and Use, and Disposition.

The sequence of the records lifecycle is arranged in the correct sequence of the record's lifecycle is:
1. Creation - produced or received
2. Maintenance and Use - it is stored, managed, and utilized.
3. Disposition -  involves either the destruction or permanent preservation of the record.
The sequence of the record's lifecycle is first, Creation, where the record is produced or received. Next, the record enters the Maintenance and Use stage, where it is stored, managed, and utilized. Finally, the record reaches the Disposition stage, which involves either the destruction or permanent preservation of the record.

Learn more about lifecycle here: brainly.com/question/29576207

#SPJ11

Final answer:

The records lifecycle consists of three main stages: creation, maintenance and use, and disposition. By following the sequence of the records lifecycle, organizations can effectively manage their records and ensure compliance with regulations.

Explanation:

The records lifecycle consists of three main stages: creation, maintenance and use, and disposition.

Creation: At this stage, records are originated through various processes such as data entry or generation of documents. Maintenance and Use: During this stage, records are actively utilized, updated, and accessed for their intended purposes. They are stored securely and managed to ensure their integrity and availability.Disposition: This final stage involves determining the fate of the records, whether they should be archived, transferred, or destroyed based on legal requirements and organizational policies.

By following the sequence of the records lifecycle, organizations can effectively manage their records and ensure compliance with regulations.

Learn more about Records lifecycle here:

https://brainly.com/question/31717403

#SPJ12

The built-in loss limitation in a complete liquidation does not apply to losses attributable to a decline in a property's fair market after its transfer to the corporation true or false

Answers

False. The built-in loss limitation in a complete liquidation does apply to losses attributable to a decline in a property's fair market value after its transfer to the corporation.

This is because the purpose of the built-in loss limitation is to prevent taxpayers from claiming losses that they have not actually realized. When property is transferred to a corporation in a complete liquidation, any built-in losses that existed at the time of the transfer are deemed to have been realized. If the property's fair market value declines after the transfer, any additional loss would be subject to the built-in loss limitation.

Learn more about market here:

https://brainly.com/question/15483550

#SPJ11

When two or more people legally agree to become co-owners of a business, the organization is called a(n)

Answers

When two or more people legally agree to become co-owners of a business, the organization is called a partnership.


A partnership is a type of business entity in which two or more people own and manage the business together. In a partnership, each partner contributes money, property, labor, or skills to the business, and they share in the profits and losses of the business. There are different types of partnerships, including general partnerships, limited partnerships, and limited liability partnerships, each with different levels of liability protection and management responsibilities. Partnerships are often formed by professionals such as lawyers, accountants, and doctors, as well as small business owners who want to share the costs and risks of starting and running a business.

Learn more about partnership here:

https://brainly.com/question/31218587

#SPJ11

The change in demand resulting from this change in real purchasing power is called:

Answers

The change in demand resulting from a change in real purchasing power is called income effect.

The income effect describes the impact that a change in the price of a good or service has on the purchasing power of a consumer's income, and how that change in purchasing power then affects the quantity demanded of that good or service. If the price of a good or service increases, a consumer's purchasing power decreases, and the quantity demanded may decrease as a result.

Similarly, if the price of a good or service decreases, a consumer's purchasing power increases, and the quantity demanded may increase as a result. Real purchasing power refers to the amount of goods and services that a consumer can afford to purchase with their income, after accounting for the effects of inflation. A change in real purchasing power can occur due to changes in the consumer's income or changes in the prices of goods and services.

For example, if a consumer's income increases but the prices of goods and services remain the same, their real purchasing power will increase because they can afford to buy more with their income. Conversely, if the prices of goods and services increase but the consumer's income remains the same, their real purchasing power will decrease because they can afford to buy fewer goods and services with their income.

The change in demand resulting from a change in real purchasing power is known as the income effect. The income effect refers to the change in the quantity of goods and services demanded by consumers in response to a change in their real income, assuming that the prices of goods and services remain constant.

Learn more about real income here:

https://brainly.com/question/17094716

#SPJ11

20. The first step in any training program is to:
A. set a specific space as a permanent training area.
B. determine what the training program will be about.
C. determine training objectives.
D. assess the needs of the organization.
E. initiate a job redesign program.

Answers

The first step in any training program is to determine training objectives. Before any training can take place, it is important to identify what skills or knowledge the participants should gain from the program. This allows for a clear understanding of what the training should accomplish and what topics should be covered.

Once the objectives are established, the training program can be designed and implemented in a way that aligns with the goals of the organization. It is worth noting that while initiating a job redesign program may be beneficial in some cases, it is not necessarily the first step in a training program. Job redesign may be a separate initiative that comes after the training program, or it may be integrated into the training objectives if it is deemed necessary. However, the priority should always be on setting clear training objectives and designing a program that supports those objectives.

Learn More about skills here :-

https://brainly.com/question/22072038

#SPJ11

The first step in any training program is to assess the needs of the organization (option D).

This involves identifying the gaps in skills and knowledge among employees, as well as understanding the organization's goals and objectives. By conducting a thorough needs assessment, you can determine the specific areas where training is required and align the training program with the organization's overall strategy.

Once the needs are assessed, you can proceed with setting training objectives, designing the training program, and establishing a dedicated training area. This approach ensures that the training program will be relevant, effective, and tailored to the organization's needs. The correct option is d.

For more about organization:

https://brainly.com/question/28497652

#SPJ4

Maryville, Inc., incurred the following costs during August: Raw materials used $ 33,100 Direct labor 65,200 Manufacturing overhead, actual 44,800 Selling expenses 26,700 Administrative expenses 19,400 Interest expense 9,100 During the month, 5,300 units of product were manufactured and 4,800 units of product were sold. On August 1, Maryville, Inc., carried no inventories. On August 31, there were no inventories other than finished goods. a. Calculate the cost of goods manufactured during August and the average cost per unit of product manufactured. b. Calculate the cost of goods sold during August. c. Calculate the difference between cost of goods manufactured and cost of goods sold.

Answers

Answer:

a. To calculate the cost of goods manufactured, we need to add up the direct materials, direct labor, and manufacturing overhead costs.

Cost of goods manufactured:

Raw materials used + Direct labor + Manufacturing overhead, actual

= $33,100 + $65,200 + $44,800

= $143,100

To calculate the average cost per unit of product manufactured, we divide the cost of goods manufactured by the number of units produced:

Average cost per unit:

Cost of goods manufactured / Units produced

= $143,100 / 5,300

= $27 per unit

b. To calculate the cost of goods sold, we need to multiply the number of units sold by the average cost per unit:

Cost of goods sold:

Units sold x Average cost per unit

= 4,800 x $27

= $129,600

c. The difference between the cost of goods manufactured and the cost of goods sold represents the change in inventory for the month:

Cost of goods manufactured - Cost of goods sold

= $143,100 - $129,600

= $13,500

This means that Maryville, Inc. increased its inventory by $13,500 during the month of August.

According to the given situation about Maryville, Inc.

(a) The cost of goods manufactured during August and the average cost per unit of product manufactured is $143,100 and $27 respectively.

(b) The cost of goods sold during August is $143,100.

(c) The difference between cost of goods manufactured and cost of goods sold is $0.

a. The cost of goods manufactured during August can be calculated using the formula:

Cost of goods manufactured = raw materials used + direct labor + manufacturing overhead, actual
Cost of Goods Manufactured = $33,100 + $65,200 + $44,800
Cost of Goods Manufactured = $143,100

To calculate the average cost per unit of product manufactured, we need to divide the total cost of goods manufactured by the number of units produced:

Average Cost per Unit of Product Manufactured = Cost of Goods Manufactured / Number of Units Produced
Average Cost per Unit of Product Manufactured = $143,100 / 5,300
Average Cost per Unit of Product Manufactured: $27

Therefore, the cost of goods manufactured during August was $143,100, and the average cost per unit of product manufactured was $27.

b. The cost of goods sold during August can be calculated using the formula:

Cost of Goods Sold = Beginning Inventory + Cost of Goods Manufactured - Ending Inventory
Since the beginning inventory and ending inventory are both zero, we can simplify the formula to:

Cost of Goods Sold = Cost of Goods Manufactured
Cost of Goods Sold = $143,100

Therefore, the cost of goods sold during August is $143,100.

c. The difference between the cost of goods manufactured and the cost of goods sold is the value of the finished goods inventory on August 31. Since there were no inventories other than finished goods on August 31, the difference between the cost of goods manufactured and the cost of goods sold is equal to the value of the finished goods inventory.

Difference between Cost of Goods Manufactured and Cost of Goods Sold = Ending Inventory
Ending Inventory = Cost of Goods Manufactured - Cost of Goods Sold
Ending Inventory = $143,100 - $143,100
Ending Inventory = $0

Therefore, the difference between the cost of goods manufactured and the cost of goods sold is $0.

Learn more about ending inventory: https://brainly.com/question/24868116

#SPJ11

Other Questions
Factors influencing whether a servant is acting within the scope of employment include all but which of the following?a.The act is similar to the one the principal authorized.b.The act is not seriously criminal.c.The act took place during hours that the servant is generally employed.d.All of the answer choices are factors in determining if an act is "within the scope of employment." A team is new to Agile approaches and is currently struggling with the new concepts, tools and techniques. How would you explain ideal time to them? 1) What are the key word(s) in the question? What do they mean?2) What unit/topic does this question relate to?3) How can you solve this?4) What is the correct answer choice? we showed a phot in which a car was crushed by heavy equipment. To prevent this,always make it easy to be seen by using your hazards lights, horn, and: What countries today correspond with the region of Southeast Asia? Consider two partners who jointly own a firm and need to decide whetheror not to go ahead with a project. The project provides monetary returns based on whether ornot the outcome is success (H) or failure (L). Suppose that if successful which happens with aprobability of (0, 1), the project delivers an additional monetary return of H. Meanwhile, theproject will deliver no additional returns if is not successful with a probability of 1 . On theother hand, the monetary cost of the project to the firm is C. The current monetary value of thefirm is given by V and assume that the two decision makers are equal partners; thus, they sharethe value as well as the returns and costs equally. The decision protocol requires their unanimousagreement to undertake the project (in other words, each partner has a veto power).Assume that the first partner is risk neutral and has a money utility function u1(x) = x for everymonetary amount x 0. Meanwhile, the second is risk averse and has a money utility functionu2(x) = x for every monetary amount x 0.a. (15 pts.) Suppose that V = 2000, H = 2000, C = 900, and =12. Please show that therisk neutral wishes to initiate the project while the risk averse partner uses his veto power toblock that.b. (15 pts.) Consider the following proposal of an outside consultant: The first partner is tocompensate the second with an amount of 50 in case of failure. Would the firm (each of thepartners) accept this proposal and initiate the project? Max said to his companion:If I had picked twice as many applesas I have actually done, I would have 24 applesmore than I have now."How many apples had Max picked? P.S I think it is 12.. I'm not sure so pls help You want to add an attribute to a microflow expression but it is not in the scope of the microflow. what can you do? Which is an accurate definition of an element?Question 2 options:Something that can burnSomething that cannot be broken down into simpler substances through chemical reactionsSomething that is essential to living thingsSomething that combines with hydrogen The table shows the time Mr. Levy spent tutoring two of his students and how much he was paid. Write an expression to show how much Mr. Levy will earn in h hours. How many hours must Mr. Levy tutor to earn $48? While turning and positioning a bedfast client, the PN observes that the client is dyspneic. Which action should the PN take first?A. Apply a pulse oximeterB. Measure blood pressureC> Notify the charge nurseD. Observe pressure areas Which of the following statements is FALSE?A) The profitability index measures the value created in terms of NPV per unit of resource consumed.B) The profitability index is the ratio of value created to resources consumed.C) The profitability index can can be easily adapted for determining the correct investment decisions when multiple resource constraints exist.D) The profitability index measures the "bang for your buck." An inspection can occur only: A. When the person in charge is presentB. When the inspector notified the facility 24 hours in advanceC. When the facility is open or during reasonable hoursD. When the facility is not too busy What is the simplified form of the expression 3 x 7^2 / 3 8/3 x 7-1/4 Which of the following were not among the strongly ideological conservative policies that President George W. Bush pursued soon after taking office in 2001?a. sharply limiting government-sponsored research on embryonic stem cellsb. proposing a restructuring and partial privatization of the Social Security Systemc. withdrawing American support from international health care programs that sanctioned abortiond. repudiating American support for the international Kyoto global warming agreementse. passing a massive $1.3 trillion tax cut in the face of looming federal deficits What water molecule forms with hydrogen Brainstorm some ideas for a hook for your essay. What to include in your conversation tree: write a question in spanish that uses the imperfect tense and asks about a past activity in spanish. Write three possible responses to the question. Write three reactions per response in spanish for a total of nine possible reactions? What jobs did Italians do when they arrived in the U.S.? Change in colonial policy by the British government that helped precipitate the American Revolution involved