3. An object that has a volume of 2500 cm³ is dropped into a vat of corn syrup. What is the buoyant force on the object? (The density of corn syrup is 1.38 g/cm³.)​

Answer:The yellow crystalline substance is a compound. The green gas and red powder are elements.

Explanation

Elements and compounds are considered pure substances. Elements are made up of a single type of atom while compounds are composed of two or more elements. One example of a compound is the table salt (NaCl) which is made up of one atom of sodium and one atom of chlorine. The elements in the compound are combined chemically and there is a definite ratio of these elements. They are formed by a chemical reaction where chemical bonds are formed. Furthermore, the components of the compound can be separated through several means such as extraction, distillation, etc. The process of heating the yellow crystalline substance resulted in the separation of its components namely, the green gas and red powder.

a.) 5.34102 Zn(cu)2 molecules are formed.

b.) The mass of Zn(cu)2 formed is 10.41 g at 117.44 g/mol

The entire numbers next to each component of the reaction should be noted because they will be necessary for the stoichiometric calculations that follow:

K[ag(CN)2] has a molar mass of 199 g/mol.

Zn(Cn)2 has a molar mass of 117.44 g/mol.

6.022 x 1023 molecules per mole is Avogadro's number.

a.)

35.27 g* (199 g/1 mol) x (1 mol Zn(Cn)2/ 2 mol K[Ag(CN)2]) x

(6.0221023 molecules/mol) = 5.341022 Zn(Cn)2 molecules.

b.)

35.27 g x (199 g/1 mol) x (1 mol Zn(Cn)2/ 2 mol K[Ag(CN)2]) x

Zn(Cn)2 equals 10.41 g at (117.44 g/mol).

Learn more about chemical equations at

https://brainly.com/question/7283799

#SPJ4

From ores like k[ag(CN)2], silver is frequently removed before being recovered by reaction and 5.34102 Zn(Cu)2 molecules are formed and the masses of Zn(Cu)2 formed is 10.41 g at 117.44 g/mol.

It is important to take notice of the whole numbers next to each reaction component because the following stoichiometric calculations will require them:

The molar mass of K[ag(CN)2] is 199 g/mol.

The molar mass of Zn(Cn)2 is 117.44 g/mol

Avogadro's number is 6.022 x 1023 molecules per mole.

a.) 35.27 g* (1 mol Zn(Cn)2/ 2 mol K[Ag(CN)2]) x (199 g/1 mol) x

5.341022 Zn(Cn)2 molecules =

6.0221023 molecules/mol.

b.) 35.27 g x (1 mol Zn(Cn)2/ 2 mol K[Ag(CN)2]) x (199 g/1 mol) x

10.41 g of Zn(Cn)2 are,

= 117.44 g/mol.

To know more about chemical equations, refer to the link below.

https://brainly.com/question/7283799

#SPJ4

phenol does not react with NaHCO3 , phenol solubility in water is very less about 8g in 100mL of water , so it will be present in organic layer (methylene chloride) , methylene chloride has a density of 1.33g/mL greater than water so it will be below layer in which phenol is present.

Immiscible liquids are separated using a separatory funnel, or sep funnel. Two layers appear in a separatory funnel when two immiscible liquids are added. The lower layer will be made up of the denser solvent. Most halogenated solvents are less dense than water, but most non-halogenated solvents are.

A separating funnel is used by adding the two phases and the mixture to be separated via the top while keeping the stopcock at the bottom closed. After then, the funnel is shut and gently shaken by being inverted several times. If the two solutions are combined too vigorously, emulsions will form.

To know more about separatory funnel visit:

https://brainly.com/question/23208199

#SPJ4

ANSWER

Option C

EXPLANATION

Given that;

In the reaction above, we have the following data

At the reactants side;

3 atoms of manganese

4 atoms of nitrogen

1 atom of sodium

1 atom of fluorine

At the products side

1 atom of manganese

4 atoms of fluorine

3 atoms of sodium

1 atom of nitrogen

To balance the above equation, apply the law of conservation mass

Law of conservation of mass states that matter can neither be created nor destroyed but can e transformed from one formato another.

To balance the equation, 1 mole of Mn3N4 reacts with 12 moles of Na Tto give 3 moles of MnF4 and 4 moles of Na3N

So, the new equation becomes

The following data can be deduced in the above equation

At the reactants side

3 atoms of Mn

4 atoms of N

12 atoms of Na

12 atoms of F

At the products side

3 atoms of Mn

12 atoms of F

12 atoms of Na

4 atoms of N

Looking atthe vabove data, the number of atoms of each element at the reactants side is equal to the number of atoms of same elements at the products side.

Hence, the correct answer is option Ce

u

For  a penny having mass 2.5559g dissolved in hno3 and solving from the process as given in the question we get that the penny has 2.64% of copper (Cu) by mass in it

Mass of penny mp = 2.5559g

concentration of Cu in solution = 1.06 * 10^(-2) mol/L

therefore 100ml diluted solution has

n = 1.06*10^(-2) * 100 / 1000 = 1.06 * 10^(-3) mol of copper

The molecular weight of copper mw = 63.5 g/mol

mass of copper Mcu = n * mw(molecular weight of copper)

⇒Mcu = 1.6 * 10^(-3) mol * 63.5 g/mol

⇒Mcu = 0.06731 g

Percentage by mass of copper in the penny, P= (Mcu/ mp)* 100%

⇒ P = (0.06731/2.5559)* 100 %

⇒P = 2.64%

∴There is 2.64% copper by mass in the penny

Problem to find out the mass percentage of a metal:

brainly.com/question/13767766

#SPJ4

A negatively charged core nucleus and one or more orbiting electrons make up an atom. There may be the positively charged, somewhat massive protons and neutrons that make up the nucleus. Atoms are the basic building blocks of stuff.

In a neutral atom, there are exactly as many electrons as protons. The total number of protons and neutrons in the atom's nucleus is equal to the mass number (M) of the atom. The difference between the atomic number and the mass number of the atom (M) is equal to the amount of neutrons (Z).

Absorption is the process by which an atom transitions from its ground state to an excited state by absorbing energy from its environment. After absorbing the energy, the electron advances to a higher energy state. Up the opposite process, called emission, the electron releases the excess energy it had taken in and goes back to its ground state.

To learn more about electron in an atom refer to:

https://brainly.com/question/25674345

#SPJ13

The rate constant, if the concentration of a decrease from 1.50 m to 0.367 m after 141.4 seconds the numerical value of k = 0.01460.

A rate constant is a number that describes the relationship between the rate of a chemical reaction and the molar concentration of the reactants. We can learn about the variables that affect a reaction's rate by looking at its rate constant. We can determine the dependence of the molar concentration of the reactants on the rate of reaction by knowing the rate constant.

The abundance of a constituent divided by the sum of the mixture's volumes is the definition of concentration in chemistry. There are several different categories of mathematical description: mass concentration, molar concentration, number concentration, and volume concentration. notably the state of concentration turning the focus on a single thing My focus is being disturbed by all that noise.

Learn more about rate constant here :

https://brainly.com/question/20305871

#SPJ4

Considering the chemical formula, 3.045 moles of nitrogen N are in 67.0 g of nitrous oxide, N₂O.

Chemical formulas use letters and numbers to represent chemical species. The letters are called chemical symbols and represent the elements present in the chemical species.

The numbers located to the right of each chemical symbol is a subscript that indicates the number of moles of the element present in that compound. If no subscript appears after a chemical symbol, this implies that there is only one atom of that element.

The molar mass of N₂O is 44 g/mole. If the molar mass is the amount of mass that a substance contains in one mole, this means that 1 mole of N₂O contains 44 grams of the compound.

On the other hand, 1 mole (or 44 grams, according to the definition of molar mass) of N₂O contain 2 moles of N. So, you can apply the following rule of three: if 44 grams of the compound contains 2 moles of N, 67 grams of the compound contains how many moles of N?

amount of moles of N= (67 grams× 2 moles of N)÷ 44 grams

amount of moles of N= 3.045 moles

Finally, there is 3.045 moles of N.

Learn more about chemical compound:

brainly.com/question/9763665

#SPJ1

Answer:

sp³-s sigma bond.

Hope that was the answer

Answer:

Protects the fish from their environment.

Explanation:

Fish have a mucus on their outer covering that is very slimy and slippery; this serves as a benefit for the fish that will allow it to swim more easily in water.

It also works as a little suit of armor for the fish to protect themselves against predators.

Answer:

Explanation:

We can find the number of moles from the given mass of the element by using the formula

[tex]n = \frac{m}{M} \\ [/tex]

m is the mass

M is the molar mass

n is the number of moles

The molar mass of krypton is 84 g/mol

We have

[tex]n = \frac{175.9}{84} = 2.094\\ [/tex]

We have the final answer as

Hope this helps you

Answer:

yes, they are ph sensitive

Explanation:

Plants and animals are known to show growth sensitive to pH. pH is known as the hydrogen ion concentration of a solution. For example, plants are known to be growth sensitive to the pH of the soil. Plants need an optimum pH of soil for their growth, hence, showing growth dependence on soil pH.

(B) Atomic nuclei would fly apart if strong force did not exist.

The nucleus occupies a small fraction of the atomic volume and contains the number of protons and neutrons characteristic of a particular isotope. Electrostatic repulsion forces normally cause positively charged protons to repel each other, but the nuclei do not fly off due to the strong nuclear force, the very strong but very short-range attraction between nucleons.

All stable nuclei except hydrogen have at least one neutron to overcome the electrostatic repulsion between protons. As the number of protons in the nucleus increases, the number of neutrons required for a stable nucleus increases even faster. If there are too many protons (or too few neutrons) in the nucleus, the forces will be unbalanced and the nucleus will become unstable.

Strong nuclear forces are sometimes simply called strong forces or strong interactions. This force is strong enough to overcome the repulsive force between her two positively charged protons, allowing protons and neutrons to stick together in an unimaginably small space.

Learn more about Strong and weak forces here:

https://brainly.com/question/3293487

According to Avogadro`s law, the volume of gas is directly proportional to number of moles of gas.

This law mathematically can be written as:

                                          V  ∝  n

                                          V  =  K n

                                          V/n =  K

Where V represents the volume of gas

          n  represents the number of moles of gas

           k is proportionality constant at a given temperature and pressure

This law explains that how equal volumes of all gases contain the same number of molecules when the temperature and pressure are the same. Similarly, this  law can be used to compare the same substances under two different sets of circumstances.

                                        V₁ / n₁  =   V₂ / n₂

This equation shows that the volume of the gas increases proportionally to the amount of number of moles of gas. Similarly, if the amount of gas decreases result in decrease in number of moles. As a result, neither the size of the molecules nor the molar mass of the gas affects how many atoms or molecules there are in a given volume of an ideal gas.

To learn more about Avogadro`s law click here

brainly.com/question/4133756

#SPJ4

Answer:

CH3

Explanation:

Hope this helps :)

Balloons can be used to mimic the morphologies of covalently bound chemical molecules. Many students struggle to visualize the shapes. The balloons are superior (and less expensive) than typical ball and stick model kits. The balloons in this exercise represent pairs of electron-electron clouds, not atoms.

Each balloon is an electron domain (either a bonded pair or a lone pair of electrons) that surrounds a core atom. When balloons are linked, they spontaneously adopt the lowest energy structure suggested by the VSEPR model.

Learn more about VSEPR model here:

https://brainly.com/question/28355903

#SPJ4

Prior to the industrial revolution, the previous highest level of CO2 concentration in the atmosphere over the prior 400,000 years was 300 ppm.

Before the Industrial revolution, the carbon dioxide concentration in the atmosphere was lesser as there was not much carbon dioxide waste that was produced. The highest level of carbon dioxide recorded in the air was 300 ppm at that time.

After the industrial revolution, the concentration of carbon dioxide increased. We can see the carbon dioxide concentrations to reach as high as 1.5 trillion tons today. This is because the formation of industries has been increasing since then which produces a lot of waste carbon dioxide.

To learn more about industrial revolution, click here:

https://brainly.com/question/13323062

#SPJ4

A substance made up of only one kind of atom is called Elements.

An element is a pure substance made up of only one kind of atom. A compound is substance made up some of more than  one element. in some of the elements atoms are joined in groups of two or more called as molecule . example : oxygen is an element made up of only one kind of atom that is oxygen atoms. there are 118 known elements , and are represented on the periodic table.

Thus, A substance made up of only one kind of atom is called Elements.

To learn more elements here

https://brainly.com/question/8396323

#SPJ1

The experiment should be conducted by Jane for several days and the observation of each light and its effect on the plant buds should be noted carefully.

To conduct this experiment, first, place a flowering plant in a place that receives that receive optimum sunlight. This is because this experiment is to be conducted at night time to observe the changes in the bud.

The plant should be watered and at the night, the plant should be placed under a colored light say let us take the blue colored light for the first week. The structure and shape of the bud should be noted in the initial time while placing the colored light after sunset and it should be noted before sunrise.

This observation should be noted for a week. For consecutive weeks, the colors of the light should be changed and the same observations are to be noted.

Later, from the observations inferred, the conclusion could be obtained if the plant and its bud have any effect on exposure to colored lights for several weeks.

To know more about experiments, click below:

https://brainly.com/question/26117248

#SPJ1

        A chemical reaction's rate and the concentrations of the reactants involved are correlated by an expression known as the rate law, commonly referred to as the rate equation.

       The rate equation's "orders," the exponents a and b, must be established empirically. The exponents are added to determine the reaction's overall order. In other words, the reaction is third order overall if a=1 and b=2.

       By adding together the different orders, the reaction's overall order can be determined. For instance, the overall order is 2 if the reaction is first order with regard to both A and B (a = 1 and b = 1). This is referred to as a global second order response.

Finding a Rate Law's Exponents from Initial Rates (Experimental Data)

          The molar concentrations of the reactants are used by the rate law to calculate the reaction rate. Because there are more molecules colliding and reacting with one another, reactions often proceed more quickly at higher reactant concentrations.

       The exponents of a rate law's concentration terms are added to determine its order. The rate law of a reaction can be utilized to better understand the makeup of the reaction mixture once it has been established.

To Learn more about rate law, Refer:

https://brainly.com/question/16981791

#SPJ4

The density of an object is 3.52g/cc

What is density ?

The density of a substance indicates how dense it is in a given area. Mass per unit volume is the definition of a material's density. In essence, density is a measurement of how closely stuff is packed. It is a particular physical characteristic of a specific thing. The Greek scientist Archimedes made the discovery of the density principle. If you are familiar with the formula and the relevant units, calculating density is simple. Density is represented by the symbol, alternatively it can be written as the letter D.

d = M/V

d = density

M = mass

V = volume

d = 26.4/7.5 = 3.52g/cc

The density of an object is 3.52g/cc

To know more about density from the given link

https://brainly.com/question/1354972

#SPJ13

Answer:

Useful

Explanation:

Index fossils are believed to be useful in correlating rock strata from widespread locations.▸ The collection of such fossils from different rock formations and layers enables the geologists to identify the layer of rock they were found in.

▸ They are also useful in dating and the study of geological formations which help scientists to get a clear understanding of the environment and the life forms that dwelt on the planet even hundreds of millions of years ago.

Have good day♡

Answer:

This arrangement is called a giant ionic lattice .

Forming ionic compounds -

Answer: It form ionic bond.

Explanation: It forms when atoms of a metallic element give up electrons to atoms of a nonmetallic element. Ionic bonds form only between metals and nonmetals. That's because metals “want” to give up electrons, and nonmetals “want” to gain electrons.

When aqueous lead (II) nitrate and aqueous potassium iodide are added to a dish containing water, diffusion occurs before the formation of yellow precipitate.

Diffusion is a process involving the movement of molecules to the region of lower concentration from the region of higher concentration.

When aqueous lead (II) nitrate and aqueous potassium iodide are added to a dish containing water, the compounds would dissociate into ions. Immediately after the dissociation, the ions would start to diffuse through the molecules of water to lower concentration.

After diffusion, the yellow compound lead iodide would form from the reaction between iodide ions in potassium iodide and lead ions from lead nitrate. The yellow compound would later precipitate out of the solution.

The reaction involved between the compound result in potassium nitrate and lead iodide

Lead nitrate (aq) + Potassium iodide (aq) → Lead iodide (yellow precipitate) + Potassium nitrate

To know more about Diffusion

https://brainly.com/question/14852229

#SPJ1

A molecular of this compound contains 6 hydrogen atoms. An atom is a component of an element. Each atom in a specific element has only one type of atom. Electrons, protons, and neutrons

To learn more about atom, refer to:

https://brainly.com/question/23390564

#SPJ1

Adenosine triphosphate is directly required for the regeneration steps.

What is Adenosine Triphosphate?

Adenosine triphosphate (ATP) is the source of energy for use and storage at the cellular level. The structure of ATP is a nucleoside triphosphate, consisting of a nitrogenous base (adenine), a ribose sugar, and three serially bonded phosphate groups.

What is Calvin cycle?

The Calvin cycle, light-independent reactions, bio synthetic phase, dark reactions, or photosynthetic carbon reduction cycle of photosynthesis is a series of chemical reactions that convert carbon dioxide and hydrogen-carrier compounds into glucose.

To learn more about ATP, click https://brainly.com/question/19786223

#SPJ4

The mass of anhydrous compound in 63.8 grams of manganese(ii)sulfate monohydrate is 57.01 grams.

As per the known fact, mass of manganese(ii)sulfate monohydrate is 169.02 grams/mole. Also, the mass of monohydrate which is one molecule of water is 18 grams/mole. So, the percentage of water in manganese(ii)sulfate monohydrate is 18/169.02×100

Percentage = 10.6%

Now, the amount of water in 63.8 grams of manganese(ii)sulfate monohydrate is : 10.6%×63.8

Calculating percentage

Amount of water = 6.79 grams

Mass of anhydrous compound = 63.8 - 6.79

Performing subtraction on Right Hand Side

Mass of anhydrous compound = 57.01 grams

Thus, 57.01 grams is present in mentioned salt.

Learn more about hydrates -

https://brainly.com/question/16275027

#SPJ4

The process of gasification that occurs without the chemical decomposition of the molecules is pyrolysis.

Pyrolysis is the process of heating substances especially organic materials in absence of oxygen as oxygen is not involved combustion does not occur rather a biomass thermally decomposes into combustible gases and other products.

when condensed fuel such as a candle or pool of gasoline burns the heat produced makes them convert into smaller fragments in absence of air through the application of heat.

The heat produced is responsible for gasification and responsible for thermal combustion without the usage of oxygen making them remain than combustion over oxygen which ensures complete decomposition.

To learn more about combustion see:

https://brainly.com/question/14104327?referrer=searchResults

#SJP4