Answer:
3. Inverse 1. Direct
Explanation:
P- pressure
V - volume
T - temperature
P1*V1 / T1 = P2*V2 / T2 ...... (1)
That's the general gas law with the combined ideas of charles, boyle & lussac.
Whenever you are restricted as "constant" temperature, volume, or pressure...cancel them off of your equation.
in this case 3. is indirectly telling us to cancel the temperature (T).
so we'll be left w P1*V1 = P2*V2
now notice that any relation ship that is multiplied like the one above consists of inversely related quantities. & so we conclude that-
P & V are inversely proportional or have an inverse relationship.
similarly in 1. we'll cancel p off of the general formula (1)
to be left with V1/T1 = V2/T2
also note that quantities involved in division are directly related to each other & hence the answer.
Select the correct answer.
Tropical forests contain dense trees, which allow less sunlight to penetrate. Emergent trees are trees that grow to a height of more than 45 to 55 meters, above the usual height of trees in tropical forests. Which system provides the best possible explanation for why these trees grow to those heights?
A.
shunted growth pattern
B.
homeostasis
C.
due to less exposure to sunlight
D.
phototropism
A scientist was in the field when he saw a mineral sample. He wanted to determine the relative hardness of the mineral, so he conducted scratch tests. He summarized his results in a table. A 2 column table with 4 rows. The first column is labeled Mineral with known hardness with entries: Chalcopyrite, pyrite, Orthoclase, Quartz. Second column is labeled Was a scratch produced? with entries: Yes, Yes, Yes, No. What conclusion can you make about the hardness of the mineral?.
The mineral hardness depends on its resistance to being scratched. Mohs scale is used to determine the hardness of an unknown mineral. The unknown mineral is harder than Orthoclase, but not harder than Quartz.
-------------------------
The hardness of a mineral is its resistance to being scratched or marked on the surface by another material.
Several elements are used to test the hardness of a mineral, like another mineral of known hardness.
Many different scales can be used to identify the mineral. However, the most commonly used is the Mohs scale.
Let us say that you have two minerals. You already know which mineral is one of them and its hardness.
If the unknown mineral scratches the known mineral, means that the first one is harder than the second one.But if the unknown mineral does not get to scratch the known one, it means they are equally hard, or the known mineral is harder than the unknown one.In the exposed example, the table must be as follows
Mineral Was a scratch produced?
Chalcopyrite YES
pyrite YES
Orthoclase YES
Quartz NO
Quartz is the hardest of these minerals. Its hardness level is 7 according to the Mohs scale.
Because scratches were produced using Chalcopyrite, Pyrite, and Orthoclase, we can assume that the unknown mineral is harder than these three ones.
However, no scratch was produced using quartz, suggesting that the unknown mineral is between orthoclase and quartz in the Mohs scale.
The unknown mineral is harder than Orthoclase, but not harder than Quartz. It is between 6 and 7 hardness levels.
---------------------------
You can learn more about the Mohs scale at
https://brainly.com/question/198363
https://brainly.com/question/1585664
https://brainly.com/question/10202262
Answer:
I can conclude that the mineral that the scientist found is harder than chalcopyrite, pyrite, and orthoclase, but not harder than quartz. I can also conclude that the unknown mineral is a relatively hard mineral.
Explanation:
edge example 2023
please help quickly
Rubia was given a type of inclined plane called a ramp in her science class. Her teacher told her that the ramp should have a mechanical advantage of 3.
Rubia pulled a block up the ramp, but afterward she calculated that the mechanical advantage of the ramp was 2.8 instead of 3. Her teacher said she did not make a mistake. What did Rubia calculate?
A.
the actual operating power of the ramp
B.
the actual mechanical advantage of the ramp
C.
the ideal mechanical advantage of the ramp
D.
the ideal operating power of the ramp
Answer: B. The actual mechanical advantage of the ramp.
Explanation:
The professor saying that the ramp SHOULD have a mechanical advantage of 3 indicates that that would be the ideal mechanical advantage. Since Rubia calculated it to be 2.8, that means that it is the acutal mechanical advantage. The actual advantage will be reduced from the ieal due to things like friction.
What are ocean currents?
Answer:
What are ocean currents?Ocean currents are continuous movements of water in the ocean that follow set paths, kind of like rivers in the ocean.A chemist wants to extract the gold from 54.9 g of AuCl3*2H20 *gold(III) chloride dyhydrate) by electrolysis of an aqueous solution. What mass of gold could be obtained from this sample? Answer in units of g
From the information provided in the question, the mass of gold that can be obtained from this sample is 31.5 g of Au.
Given that the reduction of gold III occurs thus;
Au^3+(aq) + 3e ------> Au(s)
Number of moles of gold(III) chloride dihydrate = mass/molar mass = 54.9 g /339.35 g/mol = 0.16 moles
Number of moles of Au^3+ in AuCl3.2H20 = 0.16 moles
Now;
1 mole of Au has a mass of 197 g/mol
0.16 moles of Au has a mass of 0.16 moles × 197 g/mol/1 mole
= 31.5 g of Au.
The mass of gold that can be obtained from this sample is 31.5 g of Au.
Learn more: https://brainly.com/question/6284546
1. How many covalent bonds can nitrogen form?
2. Which of the following represents a covalent compound?
A. O2
B. CO2
C. Cl2
D. NaCl
3. 2. Nitrogen is a diatomic element with five valence electrons. Create a model of a molecule of nitrogen.
Answer:
1. 3 covalent bonds
2. CO2
Nitrogen can form three covalent bonds and carbon dioxide represents a covalent compound.Molecule of nitrogen is attached in image below.
What is a covalent bond?Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ6
how many moles of water in 100 grams
Answer:
There are approximately 5.55 moles
Explanation:
What is the one defining abiotic factor of a desert?
cold temperatures
high winds
little or no rainfall
high humidity
Hello! :p .
deserts are known to have little to no rain fall & drop to very low temperatures at night! I hope this helps!
Answer: little or no rainfall
Explanation: Precipitation, sunlight, and temperature are all abiotic factors.
Deserts have a lack of rainfall.
Some deserts are hot, some deserts can be cold too.
Abiotic factors are extreme temperatures of the day and night the fast winds the strong amount of sunlight scarcity of water
How did the Heisenberg uncertainty principle contribute to the idea that electrons occupy “clouds,” or “orbitals”?
What is the frequency of the above wave?
Answer: is a measurement of how often a recurring event such as a wave occurs in a measured amount of time
Explanation:
what happens when you add vinegar to baking soda
Answer:
When baking soda is mixed with vinegar, something new is formed. The mixture quickly foams up with carbon dioxide gas. If enough vinegar is used, all of the baking soda can be made to react and disappear into the vinegar solution.
Explanation:
In Natural selection, who/what makes the decision about which traits are desirable and get passed to future generations?
please need help asap thank you.
Answer:
Different alleles and genes determine what gets passed down.
Explanation:
Its a pretty weird/ open ended question, but the alleles that help an organism survive, will be passed down more often because they are more "fit" and can out survive its competitors within a certain species.
When 25.0 g of NaCl is added to 175 g of water, the mass percent (m/m) NaCl is ________. 7.00% 8.00% 12.5% 25.6% 14.3%
Answer:
12.5%
Explanation:
percent blurf = quantity of blurftotal quantity×100quantity of blurftotal quantity×100
So for percent by mass, both quantities are expressed as mass, and it’s the mass of NaCl divided by the total mass of the solution, then times 100%
mass % NaCl = 25 g/175g×100
mass %NaCl = 14.3%
A student pours ammonium nitrate into a container of room temperature water. The student stirs the mixture with a stirring rod and then feels the outside of the container, which is cold to the touch. Which material is part of the system that absorbed heat?
the water
the air
the stirring rod
the container
The material that absorbs the heat of the system is water owing to its high specific heat capacity.
The specific heat capacity of a substance refers to the amount of heat that is capable of increasing the temperature of 1 Kg of a body by 1 K. The higher the specific heat capacity, the more the amount of heat that the body can absorb without temperature change.
The material that absorbs the heat of the system is water because water has a higher specific heat capacity than all the other materials present.
Learn more about specific heat capacity: https://brainly.com/question/2530523
The material which is part of the system that absorbed heat is; The water.
Discussion:
According to the question;
Water was initially at room temperature.We know by convention, ammonium nitrate is a cold substance.In essence, the heat liberated from the system must have been absorbed by the water so that the outside of the container after mixing becomes cold.
This is so because water has a high specific heat capacity.
Read more on heat capacity:
https://brainly.com/question/16559442
How many protons, neutrons, and electrons are in an atom of beryllium with a mass number of 9?
A) 5 protons,5 electrons,4 neutrons
B) 4 protons,4 electrons,4 neutrons
C) 4 protons,4 electrons,9 neutrons
D) 4 protons,4 electrons,5 neutrons
Answer:
c / a
correct me if im wrong
Answer:
D) 4 protons, 4 electrons, 5 neutrons
A chemist heats a gas within a sealed, rigid container. Which statement describes the changes that occur in the gas? (1 point)
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure
increases
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure decreases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
increases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
decreases
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
An increase in the temperature of a gas increases the collision rate of the molecules of the gas according to the kinetic theory.
With increased kinetic energy, the molecules of the gases collide more frequently with each other and the walls of the container.
The collision creates an increase in the magnitude of pressure inside the container.
More on the kinetic theory of gases can be found here: https://brainly.com/question/15354399?referrer=searchResults
Answer:
C
Explanation:
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
Explain what happens during soil depletion and also how we can help prevent this naturally without chemicals?
PLZ FAST TYY <3
Answer: create more healthy products for the soil and animals
Explanation:
For an electric toothbrush, is input energy equal to useful output energy? Explain
your answer.
No, input energy is not equal to useful output energy, if it is an electric toothbrush.
What is the useful type of energy produced in an electric toothbrush?Electrical Energy is the useful type of energy produced in an electric toothbrush.
If input energy is equal to useful output energy. This means that the total amount of energy that is in an isolated system (such as an engine or a generator) remains constant (conserved) over time.
However, the total amount of useful energy output of an isolated system is never equal to the total energy input.
Learn more about the electric toothbrush here:
https://brainly.com/question/8318282
#SPJ1
Why can't percent yield be greater than one hundred percent?
Answer:
Percent yield is the maximum amount of product that can be formed in a reaction. Matter cannot be created or destroyed according to the law of conservation of mass, so you cant have over 100%.
Explanation:
Why does liquid move like it does when heated on the right side?
Answer:Liquids expand for the same reason, but because the bonds between separate molecules are usually less tight they expand more than solids.
Explanation:Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid.
How does VSEPR theory describe the double bonds between the central carbon atom and each oxygen atom of Co2?
The double bonds in CO2 are counted as single regions of electron density.
The valence shell electron pair repulsion theory VSEPR is a description of the shape of molecules based on the number of electron pairs that surround the central atom in the molecule. Double bonds are counted as a single region of electron density.
Hence, the two double bonds in CO2 are counted as two regions of electron density around the central carbon atom. Hence, the molecule is liner at a bond angle of 180 degrees.
Learn more about VSEPR theory: https://brainly.com/question/14225705
how many molecules are in 122 grams of Cu(NO3)2
Answer:
3.917 x 10 ^ 23
Explanation:
You just want to use dimensional analysis to solve. So first start with 122g of copper(II) nitrite, and divide by the molecular weight to get it into moles. Then you know that 1 mole = 6.022 x 10 ^23 molecules (Avogadro's Number) so multiply that by your current moles. A hint for these problems always convert what you were given to moles since it is easy to get to a lot of things through them. ** Use the molar mass/molecular weight for going from grams to moles or moles to grams and use Avogadro's number when going from moles to atoms/molecules or reverse.
Hope this helps!
Na2SO3" represents sodium sulfite. What does the 4 mean in the formula 4Na2SO3? There are four atoms of sodium. There are four atoms of sodium sulfite. There are four molecules of sodium sulfite. There are four elements in sodium sulfite. 7
The World on Turtle's Back" is a creation myth because it focuses on characters whom the Iroquois considered "gods. " is an Iroquoian story about people and animals who talk to each other. Explains how the Iroquois believe that the earth was created. Describes Iroquoian social and cultural values.
The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.
A molecule is formed when two or more atoms of the same or different elements come together. The formula of the molecule must reflect the number of atoms from which it is formed. The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.
The "The World on Turtle's Back" is a legend creation story. According to this story, the world was created on a giant turtle back. The folktale is common among the Iroquois Native Americans.
Learn more: https://brainly.com/question/19922822
why does fluorine have the highest electronegativity
Answer:
- Fluorine has 5 Electrons in its 2P shell
- Fluorine is so close to ideal Electron Configuration, the Electrons are held very tightly to the Nucleus.
Explanation:
Hopefully this was helpful!
an atom of which of the following elements can form the most bonds?
a. phosphorus
b. sodium
c. oxygen
d.oxygen
What part of the periodic table does the neutrons tell us about the element?
Answer:
The neutrons tell us if it is an isotope or not, they also hold the atom together.
Explanation:
3) The nucleus in a photograph of a cell measures 3 mm across. If the magnification in the photograph is x 500, what is the actual size of the nucleus?
Answer:
1500mm oqkwndbdjdhdndjdd
what is combined to get calcium chloride
Answer:
See below
Explanation:
This is a simple reaction.
Calcium and chlorine molecule are combined to get calcium chloride.
Ca + Cl₂ → CaCl₂
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Is this statement true or false?
A compound is a substance made of two or more elements joined in a chemical reaction.
true
false
The correct answer is False.
What is the formula for this compound?
2 atoms of aluminum, 3 atoms of sulfur
Answer:
A
Explanation:
2 atoms of aluminum, 3 atoms of sulfur
Aluminum = Al
Sulfer = S
i just took the test
The formula for 2 atoms of Al and 3 atoms of S is Al₂S₃ and is named Aluminium Sulphide.
How are the formulas of the compound formed?Al has atomic no. =13, S has atomic no.=16
So the valencies of the given elements are
Al⁺³ and S⁻² to attain the noble gas configuration.
Al⁺³↘ ↙S⁻³
Al₂S₃
Cross multiply the valancies for the formation of molecular formula.
Hence, the formula is Al₂S₃.
Learn more about chemical formulas.
https://brainly.com/question/11995171
#SPJ2