4. Scenario: A car runs into a truck.
a. Identify two objects that are interacting (colliding) in this scenario)
One object is...
The other object is...
b. Identify the action and the reaction forces.

A massive star supernova is a spectacular event that can shine as bright as an entire galaxy. However, after the initial explosion, the supernova's brightness will gradually decline over time.

This process is known as the supernova's light curve, and it can be used to determine how long it takes for the supernova to decline to a certain percentage of its peak brightness. In the case of a massive star supernova, it typically takes around 100 days for the supernova to decline to 1% of its peak brightness. However, this can vary depending on several factors, including the size and mass of the star, the distance from Earth, and the viewing angle. Understanding the light curve of a supernova is important for astronomers, as it can provide valuable information about the supernova's physical properties and the nature of the explosion. By analyzing the changes in brightness over time, astronomers can also learn more about the processes that occur during the supernova, such as the formation of a neutron star or black hole. In conclusion, it takes approximately 100 days for a massive star supernova to decline to 1% of its peak brightness, although this can vary depending on various factors.

Learn more about supernova here

https://brainly.com/question/1276261

#SPJ11

The number of voltaic cells each partner will investigate on their own depends on the experimental setup and the specific instructions given. If the experimental setup involves investigating the cell potential between two different metals, each partner will need to investigate one cell potential.

For example, if one partner investigates the cell potential between copper and zinc, the other partner will investigate the cell potential between zinc and copper.

However, if the experimental setup involves investigating the cell potential between different combinations of metals, each partner may investigate multiple voltaic cells.

For instance, if the experimental setup involves investigating the cell potential between copper and zinc, copper and iron, and zinc and iron, each partner will need to investigate three cell potentials.

Overall, the number of voltaic cells each partner will investigate on their own will depend on the specific instructions and setup of the experiment.

To know more about "Cell potential " refer here:

https://brainly.com/question/29653954#

#SPJ11

Answer:

Redshift is related to the velocity of an object moving away from the observer

Redshift is due to the longer wavelength reported by the observer

If an object has a smaller redshift, it is moving more slowly away from the observer.

Moment of inertia of disk: 2.6 kg/m² (approximately).

The moment of rotational inertia, also known as the moment of inertia or simply inertia, is a measure of an object's resistance to changes in its rotational motion.

For a uniform thin disk rotating around an axis perpendicular to its flat face, the moment of inertia can be calculated using the formula:

I = (1/2) * m *[tex]r^2[/tex]

where I represents the moment of inertia, m is the mass of the disk, and r is the radius of the disk.

In this case, the mass of the disk is given as 2.58 kilograms and the radius is 1.7 meters. Plugging these values into the formula, we get:

I = (1/2) * 2.58 * [tex](1.7)^2[/tex]

Simplifying the equation, we find:

I = 2.61 kg/[tex]m^2[/tex]

Therefore, the moment of rotational inertia of the disk around the specified axis is approximately 2.6 kg/[tex]m^2[/tex].

For more such questions on Moment, click on:

https://brainly.com/question/26117248

#SPJ11

The group of constellations through which the Sun passes as it moves along the ecliptic is called the Zodiac.

These constellations are significant in astrology and serve as a reference system in astronomy for mapping the sky. The Zodiac is divided into twelve equal sections, each about 30° in width, known as the signs of the zodiac or zodiac signs. These twelve signs are Aries, Taurus, Gemini, Cancer, Leo, Virgo, Libra, Scorpio, Sagittarius, Capricorn, Aquarius, and Pisces. As the Sun moves through each sign, it influences the character and fate of those born under its influence. Astrology is based on the belief that the position of the planets and stars at the time of one's birth will determine one's character and fate.

To learn more about Zodiac click here https://brainly.com/question/28178562

#SPJ11

No, the co-efficient of friction cannot have a value such that a skier would be able to slide uphill at a constant velocity.

The co-efficient of friction represents the amount of resistance to motion between two surfaces in contact. When moving uphill, the force of gravity is acting against the skier's motion, which increases the frictional force. In order to maintain a constant velocity, the force of the skier pushing forward would have to match the force of friction, but with an increased frictional force, it would require a greater force from the skier to maintain that velocity. Therefore, it is not possible for a skier to slide uphill at a constant velocity due to the increased co-efficient of friction.
The answer is no, the coefficient of friction cannot have a value that would allow a skier to slide uphill at a constant velocity. The coefficient of friction is a measure of the resistance between two surfaces, in this case, the skis and the snow. When sliding uphill, the skier must overcome both friction and the gravitational force pulling them downhill. To slide uphill at a constant velocity, an external force would need to be applied, such as pushing or propelling themselves uphill. The coefficient of friction cannot be adjusted to overcome the force of gravity without an external force being applied.

Visit here to learn more about gravitational force:

brainly.com/question/12528243

#SPJ11

When two lamps are connected in parallel to a battery, the total electrical resistance experienced by the battery is less than the resistance of either lamp.

For more such question on electrical resistance

https://brainly.com/question/30609640

#SPJ11

Being struck by a bullet is likely more traumatic than being stabbed by a knife blade due to velocity.

Velocity refers to the speed at which an object is moving in a particular direction. Bullets travel at a much higher velocity than knife blades, which means they can cause significantly more damage to the human body upon impact.

When a bullet enters the body, it can create shockwaves that disrupt vital organs, bones, and tissues. In contrast, a knife blade typically moves at a slower speed and is more likely to create a puncture wound that may not necessarily cause as much internal damage.
The high velocity of a bullet is the primary reason why it is more traumatic than a knife blade. The bullet moves much faster than the knife blade and generates a considerable amount of kinetic energy upon impact.

Additionally, the trajectory of a bullet can also affect the extent of damage it causes. Depending on where the bullet strikes, it may hit vital organs or arteries, leading to potentially life-threatening injuries. Inertia and mass may also play a role, but velocity is the most significant factor in determining the level of trauma caused by a bullet or knife blade.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ11

The wavelength of a wave is directly proportional to its frequency and inversely proportional to its speed. Mathematically, we can express this relationship as: wavelength = speed/frequency

In the case of a wave traveling along a long spring, the speed of the wave is determined by the properties of the spring, such as its tension and mass per unit length. Since the spring is assumed to be uniform in this question, we can assume that its speed is constant.

Therefore, if the frequency of the wave is doubled, its wavelength must be halved in order to keep the above equation balanced. This can be seen from the fact that the numerator (speed) stays the same while the denominator (frequency) is multiplied by 2.

To know more about wavelength   visit:-

https://brainly.com/question/28466888

#SPJ11

Answer:

4.27

Explanation:

Rail length changes by 88 mm (option d) between extreme temperatures.

To calculate the change in length of the rail between the highest summer temperature and the lowest winter temperature, we can use the formula:

ΔL = L * α * ΔT

where:

ΔL is the change in length,

L is the original length of the rail (1.0 km = 1000 m),

α is the coefficient of linear expansion for steel (11 x 10^(-6) K^(-1)),

ΔT is the temperature difference (40°C - (-40°C) = 80°C).

Plugging in the values:

ΔL = 1000 * (11 x 10^(-6)) * 80

ΔL = 0.088 m = 88 mm

Therefore, the rail would change in length by 88 mm between the highest summer temperature and the lowest winter temperature. So the correct answer is 88 cm.

For more such questions on temperatures, click on:

https://brainly.com/question/26866637

#SPJ11

The A) negative sign is displayed. This is because when current flows into the meter on the negative terminal, the current is flowing in the opposite direction to the flow of electrons within the meter. This results in a decrease in the flow of electrons, which causes a deflection of the needle towards the negative side of the meter scale.

The meter is an instrument used to measure electrical quantities, such as current, voltage, and resistance. It typically consists of a coil of wire that is free to move around a permanent magnet. When a current flows through the coil, it interacts with the magnetic field, causing the coil to move and deflect the needle on the meter scale. The negative terminal is the terminal on a battery or other electrical device that is connected to the negative electrode or pole. This is usually indicated by a negative sign (-) or a black wire. When a current flows into the meter on the negative terminal, it means that the current is entering the meter from the negative electrode of the circuit. In summary, when current enters the meter on the negative terminal, a negative sign is displayed because the flow of electrons within the meter is decreased, causing the needle to deflect towards the negative side of the meter scale.

learn more about negative terminal here.

https://brainly.com/question/14236970

#SPJ11

Scarlett and Hunter Johansson are working together to push a block of mass 27 kg across the floor, then the magnitude of the resulting acceleration is 15.6 m/s².

Force is responsible for the motion of an object. it produces acceleration in the body. According to newton's second law force is mass times acceleration i.e. F =ma. Its SI unit is N which is equivalent to kg.m/s². There are two types of forces, balanced force and unbalanced force.

In this problem the diagram is not given, Consider the diagram in which two forces are equal but there is 60° of angle between them.

The resultant force between them is

F² = F₁² + F₂² + 2F₁F₂cosθ

F² = 277² + 277² + 2×277²cos60

F(r) = 479.7 N

This resultant force,

frictional force F(f) = μmg

F(f) = 0.24 × 24kg × 9.8

F(f) = 56.4 N

The actual force acting on the block is

F = F(r) - F(f)

F = 479.7 N - 56.4 N

F = 423.3 N

the acceleration of the block is,

a = F/m = 423.3 N/27 kg

a = 15.6 m/s²

TO know more about acceleration :

https://brainly.com/question/12550364

#SPJ1.

The shortest wavelength, in this case, 0.925 nm, represents the highest energy x-ray produced by the tube.

X-ray tubes generate x-rays by accelerating electrons and causing them to collide with a target, typically made of a heavy metal like tungsten.

When the electrons interact with the target, they produce x-rays with a range of wavelengths.

The shortest wavelength, in this case, 0.925 nm, represents the highest energy x-ray produced by the tube. The range of wavelengths produced depends on the voltage applied to the tube and the target material used.

Learn more about "wavelength": https://brainly.com/question/10728818

#SPJ11

The necessary energy is approximately 3.1 x 108 joules.

It takes a 110 kilogramme block of -9°C ice placed in a 115°C oven until it vaporises and finds equilibrium. calculating the 1.1 x 107 J of energy required to warm the ice from -92°C to 0°C.

Then, we must calculate the amount of energy—roughly 3.3 x 106 J—needed to totally melt the ice at 0°C. About 4.6 x 107 J of energy is needed to heat the melted ice from 0°C to 100°C. At 100 degrees Celsius, it takes approximately 2.6 × 108 J of energy to vaporise all the water.

Finally, it takes around 5.5 x 106 J of energy to heat the resultant steam from 100°C to 115°C. The necessary energy is approximately 3.1 x 108.

Learn more about energy:

https://brainly.com/question/30672691

#SPJ4

1. Using electricity in a lamp is Useful when electrical energy is converted to light energy and wasteful when electrical energy is converted to thermal (heat) energy.

2. Using petrol (gasoline) in a car engine is useful when Chemical energy is converted to mechanical energy and kinetic energy. And wasteful when chemical energy is converted to thermal energy.

3.  Using electricity in a motor is useful when electrical energy is converted to mechanical energy. And wasteful when thermal and sound energy.

Using gasoline in a car engine is all about the convertion of chemical energy that is in the hydrocarbons in gasoline into kinetic energy, so that a car can move.

This process, is not really efficient, because some energy is wasted as heat and noise as a result of friction and other processes.

This is why many automobiles have an energy efficiency rating, that can calculate the amount of gasoline necessary to go a specific distance.

Find more exercises on energy change when Using petrol (gasoline);

https://brainly.com/question/29502803

#SPJ1

The total flux through the curved sides of the cylinder is:

Φ_curved = Φ_total - Φ_ends = qL / (8πε0r)

Since the point charge q is placed at the center of the cylinder and on its central axis, the cylinder has a high degree of symmetry. By applying Gauss's law, we can easily find the total flux through the curved sides of the cylinder.

First, we can consider the flux through the ends of the cylinder. By symmetry, the electric field lines will be perpendicular to the ends of the cylinder, and the electric flux will be uniform over each end. By Gauss's law, the flux through each end of the cylinder is:

Φ = E * A

where E is the electric field strength, and A is the area of each end of the cylinder. Since the cylinder has a circular cross-section, the area of each end is A = πr².

The electric field strength E can be found by applying Gauss's law to a spherical Gaussian surface centered on the point charge q, with radius greater than the radius of the cylinder. By symmetry, the electric field will be uniform over the surface of the Gaussian sphere. The flux through the Gaussian sphere is given by:

Φ = q / ε0

where ε0 is the electric constant.

The area of the Gaussian sphere is A = 4πr². Therefore, the electric field strength E is:

E = Φ / A = q / (4πε0r²)

Now we can calculate the flux through each end of the cylinder:

Φ_end = E * A = (q / (4πε0r²)) * πr^2 = q / (4ε0)

The total flux through the ends of the cylinder is twice this amount, since there are two ends:

Φ_ends = 2Φ_end = q / (2ε0)

Next, we can consider the flux through the curved sides of the cylinder. By symmetry, the electric field lines will be parallel to the axis of the cylinder, and the electric flux will be uniform over the curved surface of the cylinder. Therefore, the flux through the curved sides of the cylinder is:

Φ_curved = E * L * w

where L is the length of the cylinder, and w is the width of the curved surface. The width of the curved surface is equal to the circumference of the cylinder, which is 2πr. Therefore, the flux through the curved sides of the cylinder is:

Φ_curved = E * L * 2πr = qL / (8πε0r)

The total flux through the cylinder is the sum of the flux through the ends and the flux through the curved sides:

Φ_total = Φ_ends + Φ_curved = q / (2ε0) + qL / (8πε0r)

Therefore, we can say that the total flux through the curved sides of the cylinder is:

Φ_curved = Φ_total - Φ_ends = qL / (8πε0r)

To know more about the total flux refer here :

https://brainly.com/question/29665619#

#SPJ11

Using conservation of angular momentum, the angular acceleration of the reel is found to be (g R / I) m. The corresponding angular displacement of the spool and the length of the line pulled from the spool are 1/2 (g R / I) m t² and 1/2 g t², respectively.

In this scenario, we can use the principle of conservation of angular momentum to find the angular acceleration of the reel. Since the spool is initially at rest, its initial angular momentum is zero. However, when the fish pulls the line with tension F, the spool starts to rotate, which means its final angular momentum is not zero.

The formula for conservation of angular momentum is:
Initial Angular Momentum = Final Angular Momentum

Since the initial angular momentum is zero, we only need to find the final angular momentum. The final angular momentum is the product of the moment of inertia I and the angular velocity ω of the spool. However, since we're looking for the angular acceleration α, we need to differentiate this formula with respect to time:

L = Iω
dL/dt = I(dω/dt)

The left-hand side of this equation is simply the tension F times the radius R of the spool, because the fisherman is pulling the line with tension F and the spool is rotating around the center of the spool, which has a radius R. Therefore, we can write:

F R = I(dω/dt)

We can solve for dω/dt to find the angular acceleration α:
dω/dt = (F R) / I = (F / I) R

Now we need to find the angular displacement of the spool and the length of the line pulled from the spool. We can use the equations of rotational kinematics:
ω = α t
θ = 1/2 α t²

where θ is the angular displacement of the spool. Substituting the expression for α that we just found, we get:
ω = (F / I) R t
θ = 1/2 (F / I) R t²

The length of the line pulled from the spool is simply the distance that the fish pulls the line. We can use the formula for linear acceleration:
a = F / m

where m is the mass of the fish. Assuming that the fish is pulling the line with a constant force, we can use the formula for constant acceleration:
s = 1/2 a t²

where s is the distance that the fish pulls the line. Since the gravitational acceleration is g, we have:
m g = F

Substituting this into the above formulas, we get:
ω = (g R / I) m t
θ = 1/2 (g R / I) m t²
s = 1/2 (g / m) m t² = 1/2 g t²
So the angular acceleration of the reel is (g R / I) m, the angular displacement of the spool is 1/2 (g R / I) m t², and the length of the line pulled from the spool is 1/2 g t².

To know more about the conservation of angular momentum refer here :

https://brainly.com/question/30825497#

#SPJ11

To solve this refrigerated problem, we can use the thermodynamic properties of R-134a from the data. Let's denote the states as follows:

State 1: Inlet to the compressor

State 2: Outlet of the compressor, inlet to the condenser

State 3: Outlet of the condenser, inlet to the evaporator

State 4: Outlet of the evaporator, inlet to the compressor.

We are given the following information:

T1 = -34°C

p1 = 60 kPa

T2 = 42°C

p2 = 1.2 MPa

T3 = -29°C

T4 = -34°C

m_dot = 0.22 kg/s

Tcw1 = 16°C

Tcw2 = 28°C

Q_net,in = 450 W

To find the quality of the refrigerant at evaporator inlet (state 3), we can use the following formula:

h4 = hf4 + x4 * (hfg4)

where h4 is the enthalpy at state 4 (inlet to compressor), hf4 and hfg4 are the enthalpy of saturated liquid and vapor at the same temperature as state 4, respectively, and x4 is the quality of the refrigerant at state 4. Since state 4 is at -34°C, we can find the values of hf4 and hfg4 from the R-134a tables:

hf4 = 83.97 kJ/kg

hfg4 = 248.32 kJ/kg

Substituting the given values, we get:

h4 = 83.97 + x4 * 248.32

At state 3, the refrigerant is a saturated vapor, so we have:

h3 = hg3 = 285.62 kJ/kg

Next, we can use the energy balance for the evaporator to relate the enthalpies at states 3 and 4:

m_dot * (h3 - h4) = QL

where QL is the refrigeration load. Substituting the values we know, we get:

0.22 * (285.62 - (83.97 + x4 * 248.32)) = QL

Solving for x4, we get:

x4 = 0.792

Therefore, the quality of the refrigerant at evaporator inlet is 0.792.

The mass flow rate of the refrigerant is given as m_dot = 0.22 kg/s.

The net compressor power input can be found from the energy balance for the compressor:

W_net,in = m_dot * (h2 - h1)

Learn more about refrigerated Visit: brainly.com/question/29510163

#SPJ4

Determining the message's direction and source requires radio telescopes, interferometry, analyzing frequencies, and sensitive equipment for detection.

Determining the direction from which a message is coming requires advanced radio astronomy techniques.

By employing an array of radio telescopes, such as the Very Large Array (VLA), signals can be analyzed to determine their point of origin.

This process involves measuring the time delays between receiving the signal at different telescopes and using interferometry to triangulate the source location.

Identifying the channels or frequencies on which the message is being broadcast necessitates spectrum analysis.

The width of the channel depends on factors like the modulation scheme and bandwidth allocation.

The strength of the signal determines detectability;

radio telescopes are equipped to detect even weak signals by amplifying and analyzing them with advanced signal processing techniques.

For more such questions on frequencies , click on:

https://brainly.com/question/254161

#SPJ11

The focal length of the objective lens is approximately -11856.5 cm, based on the given information.

To determine the focal length of the objective lens, we can use the formula for the total magnification of a compound microscope, given by:

Magnification = -(focal length of the objective lens / focal length of the eyepiece)

Given that the magnification is -4525 and the focal length of the eyepiece is 2.62 cm, we can substitute these values into the formula to solve for the focal length of the objective lens.

-4525 = -(focal length of the objective lens / 2.62)

By cross-multiplying and solving for the focal length of the objective lens, we get:

focal length of the objective lens = (-4525 * 2.62) cm

Finally, to find the numerical value, we calculate:

focal length of the objective lens ≈ -11856.5 cm

Therefore, the focal length of the objective lens is approximately -11856.5 cm.

For more such questions on length, click on:

https://brainly.com/question/29813582

#SPJ11

To estimate how high Sterling Archer should be able to vault, we need to use the law of conservation of energy.

At the end of his approach run, Archer has a kinetic energy of ½mv², where m is his mass and v is his horizontal velocity, which is 8 m/s.

Therefore, his kinetic energy is ½(50 kg)(8 m/s)² = 1600 J. When he plants the pole and starts to go up, this kinetic energy is converted into potential energy, which can be calculated using the formula mgh, where m is his mass, g is the acceleration due to gravity (9.8 m/s²), and h is the height he reaches.

Therefore, h = (kinetic energy)/(mg) = (1600 J)/(50 kg x 9.8 m/s²) = 3.3 m. However, we need to add his initial height of 1.0 m to this, so the final answer is 4.3 m.

Therefore, if Archer's kinetic and potential energies are all converted to potential energy, he should be able to vault to a height of approximately 4.3 meters.

To know more about gravity refer here:

https://brainly.com/question/31321801#

#SPJ11

0.7 megohms is equal to  700,000 Ohms.So the correct option is A) 700,000 Ohms.

The prefix "mega-" means one million, so 1 megohm (MΩ) is equal to 1,000,000 ohms. Therefore, to convert from megohms to ohms, we need to multiply by 1,000,000.

0.7 megohms x 1,000,000 = 700,000 ohms

So, 0.7 megohms is equivalent to 700,000 ohms.

Alternatively, we can also use the following conversion factors:

1 MΩ = 1,000,000 Ω

To convert from megohms to ohms, we can multiply by 1,000,000:

0.7 MΩ x 1,000,000 = 700,000 Ω

Either way, we get the same answer of 700,000 ohms.

Learn more about  megohm here:

https://brainly.com/question/24184752

#SPJ11

The number of photons in the second-longest wavelength mode is1 / [exp(hc/3λ1kT) - 1]. The number of photons in the third-longest wavelength mode is  1 / [exp(hf3/kT) - 1].  jmax, the largest mode number is L / λ1

A). f = c / λ

f2 = c / (3λ1)

The number of photons in this mode is:

N2 =[tex]1 / [exp(hf2/kT) - 1][/tex]

We know that N1, the number of photons in the longest wavelength mode, is 4500. So we can use this to find T:

[tex]4500 = 1 / [exp(hf1/kT) - 1][/tex]

[tex]exp(hf1/kT) - 1 = 1/4500\\exp(hf1/kT) = 1 + 1/4500\\exp(hf1/kT) = 1.00022222\\hf1/kT = ln(1.00022222)\\T = hf1 / k ln(1.00022222)[/tex]

Now we can substitute this value of T into the expression for N2:

[tex]N2= 1 / [exp(hf2/kT) - 1]\\\\N2 = 1 / [exp(hc/3λ1kT) - 1][/tex]

(b) To find the number of photons in the third-longest wavelength mode, we use the same approach. The third-longest wavelength mode has a wavelength of 5λ1, so its frequency is:

f3 = c / (5λ1)

The number of photons in this mode is:

[tex]N3 = 1 / [exp(hf3/kT) - 1][/tex]

(c) To find jmax, we can use the fact that the number of modes is proportional to the length of the cavity, which is one-dimensional in this case. So:

jmax = L / λ1

In physics, wavelength refers to the distance between two consecutive points of a wave that are in phase, or the same point on consecutive cycles of the wave. It is commonly denoted by the symbol λ (lambda) and is measured in units of length, such as meters or nanometers. Wavelength plays a crucial role in many areas of physics, such as optics, spectroscopy, and quantum mechanics.

Wavelength is an important characteristic of all types of waves, including electromagnetic waves, sound waves, and even matter waves. In the case of electromagnetic waves, which include visible light, ultraviolet radiation, and radio waves, wavelength determines the color or frequency of the wave. The longer the wavelength, the lower the frequency and the less energy the wave carries, and vice versa.

To learn more about Wavelength  visit here:

brainly.com/question/4112024

#SPJ4

The rate at which water is leaking out of the cone is approximately 16.76 cubic feet per minute (ft^3/min).

To determine the rate at which water is leaking out of the cone, we need to use the formula for the volume of a cone:

V = (1/3)πr^2h

where V is the volume of the cone, r is the radius of the base, and h is the height of the cone.

We also need to use the formula for related rates:

dV/dt = (∂V/∂h)(dh/dt)

where dV/dt is the rate at which the volume of the cone is changing, (∂V/∂h) is the partial derivative of the volume with respect to the height, and dh/dt is the rate at which the height of the water level is changing.

First, we need to find the radius of the cone. We can do this by using the fact that the depth of the water is 8 ft:

h = 8 ft

The cone is similar to the larger cone, so the ratio of the corresponding dimensions is the same:

r/h = 2/3

r = (2/3)h = (2/3)(8 ft) = 16/3 ft

Now we can find the volume of the cone at any time:

V = (1/3)πr^2h

V = (1/3)π[(16/3 ft)^2](h)

Next, we need to find the rate at which the height of the water level is changing:

dh/dt = -3 in/min

We need to convert this to feet per minute, since the other measurements are in feet:

dh/dt = -0.25 ft/min

Now we can find the rate at which water is leaking out of the cone:

dV/dt = (∂V/∂h)(dh/dt)

dV/dt = (2/3)πr^2(dh/dt)

dV/dt = (2/3)π[(16/3 ft)^2](-0.25 ft/min)

dV/dt ≈ -16.76 ft^3/min

Learn more about depth here:

https://brainly.com/question/13804949

#SPJ11

Answer:

The velocity of the incoming billiard ball would become [tex]0\; {\rm m\cdot s^{-1}}[/tex] after the collision.

Explanation:

Since the collision is elastic, both momentum and kinetic energy would be conserved.

Let [tex]m[/tex] denote the mass of each ball.

Let [tex]u_{\text{a}} = 60\; {\rm m\cdot s^{-1}}[/tex] denote the initial velocity of the incoming ball. Let [tex]v_{\text{a}}[/tex] denote the velocity of that ball after the collision.

Let [tex]u_{b} = 0\; {\rm m\cdot s^{-1}}[/tex] denote the initial velocity of the ball that was stationary before the collision. Let [tex]v_{\text{b}}[/tex] denote the velocity of that ball right after the collision.

Sum of momentum before collision: [tex]m\, u_{\text{a}} + m\, u_{\text{b}}[/tex], which simplifies to [tex]m\, u_{\text{a}}[/tex] since [tex]u_{b} = 0\; {\rm m\cdot s^{-1}}[/tex].

Sum of momentum after collision: [tex]m\, v_{\text{a}} + m\, v_{\text{b}}[/tex].

For momentum to conserve:

[tex]m\, v_{\text{a}} + m\, v_{\text{b}} = m\, u_{\text{a}} + m\, u_{\text{b}}[/tex].

[tex]m\, v_{\text{a}} + m\, v_{\text{b}} = m\, u_{\text{a}}[/tex].

[tex]v_{\text{a}} + v_{\text{b}} = u_{\text{a}}[/tex]. ([tex]m \ne 0[/tex].)

Similarly, the sum of kinetic energy before the collision would be [tex](1/2)\, m\, {u_{\text{a}}}^{2} + (1/2)\, m\, {u_{\text{b}}}^{2}[/tex] and simplifies to [tex](1/2)\, m\, {u_{\text{a}}}^{2}[/tex].

Sum of kinetic energy after the collision: [tex](1/2)\, m\, {v_{\text{a}}}^{2} + (1/2)\, m\, {v_{\text{b}}}^{2}[/tex].

For kinetic energy to conserve:

[tex]\displaystyle \frac{1}{2}\, m\, {v_{\text{a}}}^{2} + \frac{1}{2}\, m\, {v_{\text{b}}}^{2} = \frac{1}{2}\, m\, {u_{\text{a}}}^{2} + \frac{1}{2}\, m\, {u_{\text{b}}}^{2}[/tex].

[tex]\displaystyle \frac{1}{2}\, m\, {v_{\text{a}}}^{2} + \frac{1}{2}\, m\, {v_{\text{b}}}^{2} = \frac{1}{2}\, m\, {u_{\text{a}}}^{2}[/tex].

[tex]{v_{\text{a}}}^{2} + {v_{\text{b}}}^{2} = {u_{\text{a}}}^{2}[/tex]. ([tex]m \ne 0[/tex].)

Hence:

[tex]\left\lbrace\begin{aligned}& v_{\text{a}} + v_{\text{b}} = u_{\text{a}} \\ & {v_{\text{a}}}^{2} + {v_{\text{b}}}^{2} = {u_{\text{a}}}^{2}\end{aligned}\right.[/tex].

It is given that [tex]u_{\text{a}} = 60\; {\rm m\cdot s^{-1}}[/tex]. Solve this system for [tex]v_{\text{a}}[/tex] and [tex]v_{\text{b}}[/tex].

Rearrange to obtain [tex]v_{\text{b}} = u_{\text{a}} - v_{\text{a}}[/tex]. Substitute this expression into the equation [tex]{v_{\text{a}}}^{2} + {v_{\text{b}}}^{2} = {u_{\text{a}}}^{2}[/tex]:

[tex]{v_{\text{a}}}^{2} + (u_{\text{a}} - v_{\text{a}})^{2} = {u_{\text{a}}}^{2}[/tex].

[tex]{v_{\text{a}}}^{2} + {u_{\text{a}}}^{2} - 2\, u_{\text{a}}\, v_{\text{a}} + {v_{\text{a}}}^{2} = {u_{\text{a}}}^{2}[/tex].

[tex]2\, {v_{\text{a}}}^{2} - 2\, u_{\text{a}}\, v_{\text{a}} = 0[/tex].

[tex]v_{\text{a}}\, (v_{\text{a}} - u_{\text{a}}) = 0[/tex].

By the Factor Theorem, either [tex]v_{\text{a}} = 0[/tex], or [tex](v_{\text{a}} - u_{\text{a}}) = 0[/tex] such that [tex]v_{\text{a}} = u_{\text{a}} = 60\; {\rm m\cdot s^{-1}}[/tex].

However, since there was a collision, velocity of the incoming ball cannot stay unchanged. Thus, the only possible solution is [tex]v_{\text{a}} = 0[/tex], meaning that the incoming ball would have stopped completely after the collision.

The final velocity of the first billiard ball after the collision is zero.

An elastic collision between two billiard balls of equal mass. Given that the initial velocity of the first ball is 60 m/s and the second ball is at rest, you can use the conservation of momentum and the conservation of kinetic energy to determine the final velocities.

In an elastic collision between two objects with equal mass, the final velocity of the first object (V1f) will be 0 m/s, and the final velocity of the second object (V2f) will be equal to the initial velocity of the first object (V1i).

So in this case, the final velocity of the first ball will be 0 m/s.

Learn more about elastic collision:

https://brainly.com/question/12644900

#SPJ11

The equilibrium temperature when equal masses of the first and third liquids are mixed is 24.5°C.

Equilibrium temperature is the temperature at which two or more substances, initially at different temperatures, attain the same final temperature when brought into thermal contact without any heat loss to the surroundings. It represents the state of thermal equilibrium between the substances.

Let the specific heat capacity of the liquids be denoted by C, and the masses of each be m.

For the first mixing, the heat lost by the hotter liquid (36°C) is equal to the heat gained by the colder liquid (13°C). Thus:

C * m * (36 - T) = C * m * (T - 13)

where T is the equilibrium temperature. Solving for T, we get:

T = (36 + 13)/2 = 24.5°C

For the second mixing, we have:

C * m * (T - 22) = C * m * (36 - T)

Solving for T, we get:

T = (22 + 36)/2 = 29°C

Finally, for the mixing of the first and third liquids, we have:

C * m * (T - 13) = C * m * (36 - T)

Solving for T, we get:

T = (13 + 36)/2 = 24.5°C

Therefore, When the first and third liquids are combined in equal masses, the equilibrium temperature is 24.5°C.

To learn more about The concept of equilibrium click:

https://brainly.com/question/31096442

#SPJ1

If the impulse of a particular force is represented by the symbol J, then:
(a) the momentum is equal to J.
(b) the change in momentum is also equal to J.
(c) J is equal to the product of F and Δt.

(d) The force is equal to the change in momentum divided by the time interval over which the force acts.

(a) Momentum: Impulse (J) is equal to the change in momentum (Δp). So, if you know the impulse, you can find the momentum before and after the application of force.

(b) Change in momentum: As mentioned above, the change in momentum (Δp) is equal to the impulse (J).

(c) Force: Impulse (J) is also equal to the product of force (F) and the time interval (Δt) during which the force is applied. To find the force, you can use the equation J = F × Δt, and you'll need to know the time interval.

(d) Change in force: The change in force would require additional information, such as the initial and final force acting on the object, or the relationship between force and time. The impulse is equal to the change in momentum, and the force is equal to the change in momentum divided by the time interval over which the force acts.

For more such questions on Impulse.

https://brainly.com/question/16980676#

#SPJ11

The voltage across the tracks is 0.43 V (rounded to two significant figures).

input power = output power (assuming 100% efficiency)

The input power is the product of the input voltage and current:

input power = 120 V x 0.28 A = 33.6 W

The output power is the product of the voltage across the tracks and the current supplied to the train:

output power = V x 79 A

Setting the input power equal to the output power, we get:

33.6 W = V x 79 A

Solving for V, we get:

V = 0.426 V

Voltage, also known as electric potential difference, is a physical quantity used to measure the electric potential energy per unit charge in an electrical circuit. It is a measure of the work required to move an electric charge from one point to another in an electric field. The unit of voltage is the volt, which is defined as one joule per coulomb.

In practical terms, voltage is the force that drives an electric current through a circuit. When a voltage is applied across a conductor, it causes a flow of electric charge, which is the electric current. The voltage can be thought of as the pressure that pushes the charge through the circuit. Voltage is an essential concept in many fields of physics, including electronics, electromagnetism, and electrochemistry.

To learn more about Voltage visit here:

brainly.com/question/29445057

#SPJ4

The speed of the earthquake waves is 6.32 km/s.

The frequency of an earthquake wave represents the number of vibrations or cycles per second and is measured in hertz (Hz). The speed of an earthquake wave, on the other hand, depends on the properties of the material through which it travels.

The distance that the earthquake wave travels from the point of origin to another location can be calculated using the formula:

distance = speed × time

In this case, the earthquake wave travels a distance of 88.5 km in 14 s. Therefore, the speed of the wave can be calculated as:

speed = distance / time = 88.5 km / 14 s = 6.32 km/s

So, the speed of the earthquake waves is 6.32 km/s.

Knowing the frequency of the wave is important because it helps in understanding the characteristics of the earthquake.

In general, higher-frequency waves are more damaging to structures, while lower-frequency waves can travel longer distances but may cause less damage.

To know more about speed of the earthquake, refer here:
https://brainly.com/question/14536119#
#SPJ11