A harmonic tremor is a type of seismic activity characterized by a continuous, low-amplitude ground shaking. The release of large amounts of stored energy in the form of volcanic or geothermal activity generally causes it.
Harmonic tremors can indicate that magma is on the move or that pressure is building up within a volcano's plumbing system. In some cases, they may also be caused by hydrothermal activity or by the motion of glaciers.
In general, harmonic tremors are seen as a warning sign of potential future volcanic activity. They can be used to alert scientists and other officials to take preventive steps to protect nearby populations. It is also possible to monitor harmonic tremors to gain insight into volcanic activity and the behavior of magma within the volcano's plumbing system.
To learn more about magma here:
https://brainly.com/question/13716544#
#SPJ11
the law which states that sediments deposited in water form as horizontal layers is called the law of
Answer:
the law of superposition.
The law of superposition states that sedimentary rock layers are deposited in a time sequence, with the oldest layer at the bottom and the youngest at the top. This law is an important principle used in geology and archaeology to date rock formations and archaeological sites.
This law states that the sediments are initially deposited horizontally. As more sediment is deposited, it is added on top of the previously deposited material and compresses the older layers. This process creates stratified layers of rock and sediment, with the oldest layers at the bottom and the youngest at the top.
The law of superposition can be used to estimate the relative age of a sedimentary rock formation. For example, if the lowest layer of a sedimentary rock formation contains fossils of an extinct species, then the rock formation must be older than the extinction date of the species. By examining the layers of sedimentary rock, geologists can infer the age of the formation relative to other formations in the same area.
In addition to sedimentary rocks, the law of superposition can also be applied to other geological structures, such as faults, igneous rocks, and cross-bedding. The law of superposition can also be used to date archeological sites. By examining the artifacts found in a particular layer of soil, archaeologists can infer the relative age of the artifacts compared to those found in other layers.
To learn more about sedimentary rock here:
https://brainly.com/question/7437433#
#SPJ11
in general, what do beaches look like at the end of winter?
Winter – Higher winter waves move sand offshore and narrow the beach. … The summer beach is covered with a layer of sand that is moved south by the longshore currents and onshore by low waves. The winter beach is denuded of sand by high storm waves.
In general, beaches look different at the end of winter compared to the peak of summer. During winter, beaches are often deserted and quiet, with fewer visitors and tourists.
The weather is usually cooler, and the water is colder, making swimming and water sports less popular. Additionally, beaches may be covered in debris, seaweed, and other natural materials that have washed up during storms or high tides. The sand may also be covered in snow, depending on the region.
However, despite the cooler weather and fewer visitors, winter beaches can be a beautiful and peaceful place to visit. Many people enjoy long walks along the shoreline, watching the waves crash against the shore, and taking in the natural beauty of the coast.
In conclusion, beaches look different at the end of winter compared to the peak of summer. They are often quieter, colder, and covered in natural materials. Despite this, they can be a beautiful and peaceful place to visit during the off-season.
For more about beaches look:
https://brainly.com/question/14900449
#SPJ11
an example of a primary effect of drought is question 15 options: a drop in groundwater levels rolling blackouts a decrease in tourism low dissolved oxygen content in reservoirs
An example of a primary effect of drought is a drop in groundwater levels.
When droughts occur, one of the most common outcomes is a drop in groundwater levels. As the amount of precipitation drops, the amount of water that enters the soil also drops, resulting in a decrease in groundwater levels. As groundwater levels decline, it becomes more challenging to access enough water to meet the needs of communities and agriculture.
As a result, water scarcity becomes an increasingly serious issue.
Therefore, a drop in groundwater levels is a primary effect of drought. Rolling blackouts, a decrease in tourism, and low dissolved oxygen content in reservoirs are all secondary effects of drought.
Drought is a prolonged dry period in the natural climate cycle that can occur anywhere in the world. It is a slow-onset disaster characterized by the lack of precipitation, resulting in a water shortage. Drought can have a serious impact on health, agriculture, economies, energy and the environment.
Answer: a drop in groundwater levels.
To know more about Drought, refer here:
https://brainly.com/question/26693108
#SPJ11
based upon your analysis, most stratovolcanoes form in which tectonic setting? group of answer choices divergent boundaries oceanic-continental convergent boundaries mantle plumes (hotspots) all of the above
The correct option is All of the above i.e. D. Most stratovolcanoes form in convergent boundaries, which occur when two tectonic plates collide. This collision causes one of the plates to slide beneath the other, creating a subduction zone.
The subducting plate melts due to the extreme pressure and heat created from the collision, resulting in magma being forced upward to form a stratovolcano. Oceanic-continental divergent boundaries can also form stratovolcanoes, as the plate separation creates a rift zone.
Mantle plumes, also known as hotspots, can also form stratovolcanoes when a column of hot material from the mantle rises up through the Earth's crust, creating a weak area of the crust which can then be filled with magma. All of these tectonic settings can create stratovolcanoes. The correct option is All of the above i.e. D.
To know more about stratovolcanoes, click here:
https://brainly.com/question/30059776
#SPJ4
the majority of the rocks that form at the surface of the earth are group of answer choices intrusive igneous rocks. foliated metamorphic rocks. sedimentary rocks. non-foliated metamorphic rocks.
Intrusive igneous rocks are rocks that form when magma cools and solidifies underground. They form in plutonic (intrusive) environments. The majority of the rocks that form at the surface of the earth are Intrusive igneous rocks. the correct answer choice is first option.
Intrusive rocks are typically more coarse-grained than extrusive igneous rocks because of their slow cooling time. Foliated metamorphic rocks are rocks that have been subjected to intense heat and pressure, causing the minerals within the rock to re-crystallize. These rocks have a foliated (layered) appearance, and are typically formed in tectonic plate boundaries and near active volcanoes. Sedimentary rocks are formed from sediment that is deposited over time, and can include minerals, fragments of rock, and even fossilized plant and animal remains.
Non-foliated metamorphic rocks are rocks that have been subjected to intense heat and pressure, causing the minerals to re-crystallize, but without any foliation or layering. Examples of non-foliated metamorphic rocks include quartzite and marble. All of these rocks are formed at the surface of the Earth and contribute to the overall geology and landscape.
Know more about igneous rocks here:
https://brainly.com/question/1743302
#SPJ11
what was your estimate of earth's albedo during the last glacial maximum? why should it be larger than the earth's current albedo of 0.30?
During the Last Glacial Maximum, it was estimated that Earth had an albedo of 0.32. Due to the greater coverage of ice and snow, it ought to be higher than the Earth's current albedo of 0.30.
During the Last Glacial Maximum, the Earth's albedo was estimated to be 0.32 .The ability to reflect sunlight into space is known as albedo. Sunlight is reflected by deserts, clouds, ice and snow, and aerosols . The more solar energy that is reflected, the higher the albedo; the chillier The albedo is also raised as the ice cover expands as the temperature drops.
The growing conditions for alpine grasslands on the TP, where Climate is the primary constraining factor, are improved by increased vegetation coverage, which results in a lower surface albedo and more energy absorbed.
To learn more about climate visit :
https://brainly.com/question/31139052
#SPJ4
does the change of environment from the base of the section up to the thick gray shale indicate an advance (transgression) or retreat (regression) of the sea?
The change of environment from the basal conglomerate to the thick gray shale indicates a transgression of the sea, as smaller clast size suggests a deeper marine environment.
During a transgression, sea level rises, leading to the inundation of previously exposed land areas. As the sea advances, the environment changes from terrestrial to marine, and sediments deposited also change from coarser to finer-grained. In this case, the transition from the basal conglomerate to the thick gray shale suggests a deepening of the marine environment as indicated by the decreasing clast size, indicating that the sea level was rising during this period.
Learn more about sea-level regression https://brainly.com/question/13436092
#SPJ11
describe the major differences in the abiotic factors observed in the high tide zone versus the lower inter tidal zone.
The abiotic factors observed in the high tide zone versus the lower intertidal zone are different. The major differences in the abiotic factors observed in the high tide zone versus the lower intertidal zone are as follows:
Abiotic factors in the high tide zone: In the high tide zone, the abiotic factors include temperature fluctuations, wave exposure, and variations in salinity. This region is typically less exposed to sunlight and air because the tide comes in and out of this zone quickly.
The high tide zone can experience strong wave action, as well as wind and water fluctuations. These factors all contribute to making it a challenging environment for plants and animals to survive.
Abiotic factors in the lower intertidal zone: In the lower intertidal zone, the abiotic factors include water pressure, light exposure, temperature fluctuations, and salinity. This region is typically more exposed to sunlight and air because the tide takes longer to come in and out.
The lower intertidal zone also experiences less wave action than the high tide zone. These factors make the lower intertidal zone an easier environment for plants and animals to survive.
To know more about intertidal zone refer here :
https://brainly.com/question/29991373#
#SPJ11
if you are at 66 degrees north on first day of winter in northern hemisphere, what will you experience?
On the first day of winter in the northern hemisphere, if you are at 66 degrees north, you will experience cold temperatures, short daylight hours, and potentially snowfall. The sun will set earlier and the temperatures will drop, often below 0 degrees Celsius (32 degrees Fahrenheit).
This region is well within the Arctic Circle, so you can expect the winter to be cold and dark. During the day, temperatures may not reach above freezing, and in the evening they will drop even further. Snowfall is common and the region will be quite dark, as the sun is much lower in the sky at this time of year. During the winter solstice, the sun may only be visible for a few hours each day in this area.
Temperature in the poles around northern hemisphere is too low for any human settlement, lack of direct sunlight is one of the major reason for this extremely low temperature and harsh climate.
Know more about northern hemisphere here:
https://brainly.com/question/13661560
#SPJ11
item2 1 points item 2 all of the ecosystems on the planet together are called the multiple choice lithosphere. biosphere. hydrosphere. stratosphere. atmosphere.
The biosphere is the term used to describe all of the ecosystems on the planet.
Biosphere includes the lithosphere (the solid crust of the Earth), the hydrosphere (the liquid water on the planet), the atmosphere (the air surrounding the Earth), and the stratosphere (the layer of air just above the atmosphere). All of these components work together to create the biosphere, and together they form a complex network of interactions. For example, water evaporates from the hydrosphere and condenses in the atmosphere, which then falls back to the Earth's surface as rain or snow. In this way, the biosphere is constantly exchanging materials and energy between its different components.
The biosphere is the Earth's living systems, including all living things on the planet, such as plants, animals, and microorganisms. The biosphere is closely related to the other three systems, as living organisms rely on water, air, and nutrients from the Earth's crust. The biosphere is the most complex and diverse of the Earth's systems, with a vast range of organisms that interact with each other in intricate ways. All the ecosystems on the planet together are called the biosphere.
For more such questions on Biosphere.
https://brainly.com/question/15083566#
#SPJ11
The term for all the ecosystems on the planet together is the biosphere, which encompasses all living organisms and their physical environments, including land, water, and air.
Explanation:All of the ecosystems on the planet together are referred to as the biosphere. This term includes all living organisms and their physical environments, spanning over land (lithosphere), water (hydrosphere), and air (atmosphere). The other options listed: lithosphere, hydrosphere, stratosphere, and atmosphere are all components of the biosphere, but they individually do not represent all ecosystems on Earth.
Learn more about Biosphere here:https://brainly.com/question/35900442
#SPJ12
which of the following is a result of seafloor spreading?
a. Trenches form at transform boundaries.
b. Mid ocean ridges form at convergent boundaries.
c. Mid ocean ridges form at divergent plate boundaries
d. Trenches form at divergent boundaries.
which of the following would cause the evaporation rate to decrease? question 22 options: increased wind speed increased temperature increased water availability increased relative humidity
In contrast to increased wind speed, temperature, and water availability, increased relative humidity would result in a decrease in evaporation rate.
The amount of water vapor in the air as compared to the maximum amount that can exist at a particular temperature is known as relative humidity. The amount of water vapor in the air increases when the relative humidity is high, which slows down the pace at which water molecules can evaporate from a surface. As a result, the rate of evaporation reduces as the relative humidity rises. On the other hand, a higher wind speed, a warmer temperature, and more water would all accelerate evaporation.
learn more about humidity here:
https://brainly.com/question/22069910
#SPJ4
According to the US National Snow and Ice Data Center, there have been __________ ice age cycles on Earth during the last 750,000 years.
Answer:
According to the US National Snow and Ice Data Center, there have been eight ice age cycles on Earth during the last 750,000 years.
According to the US National Snow and Ice Data Center, there have been eight ice age cycles on Earth during the last 750,000 years.
The Earth is not the same as it was millions of years ago. In fact, the planet has seen numerous changes and transformations throughout its life. The climate is one of the most significant factors that have impacted the Earth in this process. The climate has gone through many changes over the centuries. The Earth's climate, for example, has gone through a number of ice ages. Ice ages are periods of time when the Earth's temperature falls considerably, resulting in glaciers and ice sheets.
Learn more about ice age here: https://brainly.com/question/12916542
#SPJ11
what is the interpreted plate motion direction for the pacific plate for the time period between the formation of kauai and the big island of hawaii
Interpreted plate motion direction for the Pacific plate for the time period between the formation of Kauai and the Big Island of Hawaii is northwest, as it moves over the Hawaii hotspot.
Plates on Earth’s lithosphere have been in motion since the creation of the planet, and the movement of plates causes numerous geological phenomena, including mountain formation, volcanic eruptions, and earthquakes.
The Pacific Plate, on the other hand, has moved in various directions in recent geological history, including northward, southeastward, and westward. The direction of motion of the Pacific Plate is northwest over the Hawaii hotspot, resulting in the creation of the Hawaiian Islands.
The interpretation of plate motion helps scientists to understand the past motion of plates, present geological phenomena, and future outcomes of plate tectonics.
To know more about Pacific plate, click on the link below:
https://brainly.com/question/22063936#
#SPJ11
which of the common volcanic landforms is the largest in size? group of answer choices composite volcano coulee shield volcano cinder cone volcanic dome
Out of the given options, the shield volcano is the largest in size.
What is a shield volcano?
A shield volcano is a kind of volcano that is defined by its low profile and broad shape. Shield volcanoes are mostly formed by the eruption of basaltic lava, which flows quickly and spreads over a wide area.
The lava flow, when it cools, builds up the volcano's wide, gently sloping sides.
The following are the common features of a shield volcano: Lava plateau Flows of lava may take place from both the central summit and the fissures on the flanks Low angle slopes Gentle eruptions Mafic eruptions Shallow Mafic magma is the source of the volcano's lava composition Largest in size Out of the given options, the shield volcano is the largest in size.
Therefore, the correct option is B - shield volcano.
To know more about shield volcano, refer here:
https://brainly.com/question/503833
#SPJ11
a sedimentary basin which appears when a continent is stretched, causing down-dropped crustal blocks bordered by faults and mountains, is called a: group of answer choices rift basin. passive margin basin. intracontinental basin. foreland basin.
A sedimentary basin which appears when a continent is stretched, causing down-dropped crustal blocks bordered by faults and mountains, is called a rift basin. Therefore the correct option is option A.
A sedimentary basin is a geological basin that has formed from sediment accumulation caused by erosion or sediment deposition. Sedimentary basins occur in the Earth's crust, and they are most commonly formed by tectonic activity.
They also develop as a result of the Earth's thermal evolution, such as in the rift basins that develop on divergent plate boundaries. A rift basin is a type of sedimentary basin that forms when continental crust is stretched and thinning. It is a depressed region of the crust in the form of a valley bounded by fault lines that have uplifted peaks.
Rift basins are formed when the Earth's crust is pulled apart or thinned, resulting in a vertical drop. The depression is filled with sediments that have been eroded from the surrounding mountains, which build up to form thick layers of sediment that cover the basin's floor. Therefore the correct option is option A.
For such more question on sedimentary:
https://brainly.com/question/31060487
#SPJ11
what is an aquifer, igneous and metamorphic rocks are not good aquifers as they contain little natural porosity or permeability.
An aquifer is an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials (gravel, sand, or silt) from which groundwater can be extracted. Igneous and metamorphic rocks generally contain little natural porosity or permeability and therefore cannot be used as aquifers. Igneous rocks, for instance, form when molten magma cools and solidifies.
The cooling process does not leave much space for porosity and permeability. The recrystallization of the rock grains during metamorphism also does not leave much space for porosity and permeability.
Aquifers can be found in sedimentary rocks like sandstone, limestone and shale because the grains of these rocks are arranged in a way that allows for more porosity and permeability.
Know more about Igneous rocks here:
https://brainly.com/question/23555197
#SPJ11
which of the following glacial features is indicative of the local climate becoming dry and cold? group of answer choices boulder trains. striation. drumlins. loess.
The glacial feature that is indicative of a local climate becoming dry and cold is loess.
Loess is an unconsolidated, silty sediment deposited by the wind, typically found in arid or semi-arid climates. It is usually found on the leeward side of mountains and hills, and is often found in association with glacial deposits.
This process is often found in regions of glacial feature, such as mountain ranges and hillsides. The sediment accumulates in layers of silt, which eventually hardens and forms loess.
Learn more about climate: https://brainly.com/question/17922964
#SPJ11
__________ __________ are steep, high walls built along the coast to prevent beaches from eroding. They are usually made out of concrete.
"Sea walls are steep, high walls built along the coast to prevent beaches from eroding. They are usually made out of concrete."
Sea walls are human-made structures built along the shoreline to protect coastal areas from the effects of erosion and flooding. These walls are typically constructed using durable materials such as concrete, and they are designed to absorb the impact of waves and tidal forces.
By providing a physical barrier between the ocean and the land, sea walls can prevent erosion, protect property and infrastructure, and maintain the integrity of coastal ecosystems. However, some experts have raised concerns that sea walls can also have unintended consequences, such as disrupting natural coastal processes, altering the local hydrology, and exacerbating erosion in adjacent areas.
Learn more about Sea walls https://brainly.com/question/11722850
#SPJ11
Rice is the staple food for over half the people in the world. What is meant by this statement?
A basic and crucial part of people's daily existence is a staple meal, item, or activity. For more than half of the world's population, rice is a staple diet.
Is rice the main food consumed by almost half the world's population?The world's major staple meal is rice. Around 80% of the world's population, or more than 50 percent, depends upon rice for food. Almost 95% of the world's rice production is made and eaten in developing nations.
It is one of the most grown crops and is frequently consumed in India. It is suitable for rice farming due to the amount of precipitation, soil fertility, and availability of irrigation. It is a vital source of food and income for the farmers.
To know more about staple visit:
https://brainly.com/question/13719901
#SPJ1
__________ are created when the top of the glacier moves faster than the bottom of the glacier.
Ridges are created when the top of the glacier moves faster than the bottom of the glacier.
A ridge is a formation that is created when the top of the glacier moves faster than the bottom of the glacier. As glaciers move over time, they can create distinct formations in the landscape, and one of these formations is called a ridge. A ridge is formed when the top of a glacier moves faster than the bottom, causing the ice to crack and break off in a jagged line, creating a sharp ridge or peak in the landscape.
Glaciers are known to have a tremendous force that can create a variety of landforms as they move, like valleys, fjords, and moraines. The top of the glacier moves faster than the bottom because of the friction between the ice and the ground. The weight of the glacier on the bottom slows down the movement, while the top can continue to slide forward. This movement can cause stress, which results in fractures, and cracks in the ice, and forms ridges.
Learn more about Glaciers here: https://brainly.com/question/6666513
#SPJ11
Part A - Triggers of Mass Movement In this activity, you will explore and test your knowledge about triggers of four mass movement types. Slump: occurs on curved surfaces and involves the movement of unconsolidated materials. Slopes are considerably high in areas where a slump occurs. • Flow: occurs when material moves downslope as a viscous fluid. • Fall: this involves the freefall of rock pleces or masses. Fall occurs on slopes that are too steep for loose material to remain on the surface. Many falls occur when freeze and thaw cycles or plants roots weaken rocks to the point where gravity takes over. Creep: this involves the gradual downhill movement of soil or rock pieces. The major factor that facilitates this process is alternate expansion and contraction by freeze and thaw. Drag the appropriate labels to their respective targets. View Available Hint(s) . Triggered by large amounts of water and steep slopes Triggered by curved oversteepened slopes Triggered by repeated freezing and thawing of soils on gentle slopes Triggered by ice wedging plant activities on steep slopes Slump Flow Creep Fall
Each mass movement has specific triggers that cause them to occur, are curved oversteepened slopes for Slump, large amounts of water and steep slopes for Flow, repeated freezing and thawing of soils on gentle slopes for Creep, and ice wedging and plant activities on steep slopes for Fall.
In this activity, we will discuss triggers of four mass movement types: Slump, Flow, Creep, and Fall.
1. Slump: This type of mass movement occurs on curved, oversteepened slopes and involves the movement of unconsolidated materials. It is triggered by the weakening of the slope due to factors such as water saturation or undercutting, causing the slope to fail.
2. Flow: Flow occurs when material moves downslope as a viscous fluid. It is triggered by large amounts of water and steep slopes, which cause the soil or debris to become saturated and lose its internal cohesion. As a result, the material flows downslope under the force of gravity.
3. Creep: Creep is the gradual downhill movement of soil or rock pieces. This process is facilitated by the alternate expansion and contraction of the material due to freezing and thawing. It is triggered by repeated freezing and thawing of soils on gentle slopes, which causes the soil to slowly move downhill over time.
4. Fall: This type of mass movement involves the freefall of rock pieces or masses. Fall occurs on slopes that are too steep for loose material to remain on the surface. It is triggered by factors such as ice wedging and plant activities, which weaken rocks on steep slopes to the point where gravity takes over, causing them to fall.
In summary, each mass movement type has specific triggers that cause them to occur, including curved oversteepened slopes for Slump, large amounts of water and steep slopes for Flow, repeated freezing and thawing of soils on gentle slopes for Creep, and ice wedging and plant activities on steep slopes for Fall.
For more such question on mass movement
https://brainly.com/question/1075248
#SPJ11
the annual cycle of prevailing weather conditions at a given place based on long-term contitions is known as: weather. a trend cyclone climate global warming
The annual cycle of prevailing weather conditions at a given place based on long-term conditions is known as climate.
The term weather is used to refer to short-term conditions such as precipitation, temperature, and wind. The climate of a region is determined by a variety of factors, including latitude, elevation, prevailing winds, and the presence of land and water bodies.
It can be classified into different categories based on temperature, precipitation, and other factors. In general, climate change refers to long-term changes in weather patterns and temperature around the world, while global warming refers specifically to the gradual warming of the planet's surface due to increased levels of greenhouse gases in the atmosphere. Cyclones, on the other hand, are severe tropical storms that can cause significant damage and loss of life. Trends are statistical measurements of changes over time. The correct answer is "climate."
To know more about prevailing weather refer here:
https://brainly.com/question/17922964
#SPJ11
which of the following sediment undergoes the most compaction and reduction in volume during burial and lithification to sedimentary rock? pebbly sand coarse gravel marine mud desert dune sand
Out of the following sediments, marine mud undergoes the most compaction and reduction in volume during burial and lithification to sedimentary rock. Therefore the correct option is option C.
Marine mud is a type of sedimentary deposit that is made up of very fine-grained mineral and organic material that has been transported to the ocean by rivers and other waterways.
Marine mud is typically less than 0.0625 millimeters in size (about the size of fine-grained sand) and is the product of the weathering and erosion of rocks and minerals.
As marine mud is formed from fine-grained materials, it undergoes the most compaction and reduction in volume during burial and lithification to sedimentary rock. Therefore the correct option is option C.
For such more question on sedimentary:
https://brainly.com/question/31060487
#SPJ11
The following question may be like this:
content loaded
which of the following sediment undergoes the most compaction and reduction in volume during burial and lithification to sedimentary rock?
pebbly sand coarse gravel marine mud desert dune sandLandslide – Portuguese Bend, CA. The Problem 1 placemark flies you to the Portuguese Bend area in California. This region has experienced a massive (and progressive) landslide that has cannibalized the subdivision that once existed on the cliffs overlooking the ocean. How did urbanization likely contribute to cause the mass wasting? You may want to use your textbook. Choose one: a. Vibrations from traffic destabilized the slope. B. Concrete allowed the underlying soil to dry out and lose cohesion. C. Landscape plants (e. G. , trees, bushes) disrupted the stability of the soil. D. Water from septic systems, sprinklers, etc. , lubricated a layer of bentonite clay that slopes toward the ocean
The correct option is D. that is Water from septic systems, sprinklers, etc. , lubricated a layer of bentonite clay that slopes toward the ocean.
The Portuguese Bend landslide, in coastal southern California, is an active, slow-moving mass of blocks and debris that spans from the seashore to modest altitudes along part of the southerly boundary of the Palos Verdes Hills.
Earthflow, rotational, and translational slides all combine to form the Portuguese Bend Landslide. An older, more substantial slide was revived to create the modern slide.
Portuguese Bend, California, landslip. The Problem You can fly to the Portuguese Bend region of California with just 1 placemark. The community that used to be on the cliffs overlooking the ocean has been cannibalized by the significant (and progressive) landslip that occurred in this area. urbanisation likely contributes to cause mass wasting A layer of bentonite clay that slopes towards the ocean was lubricated by water from sprinklers, septic systems, etc.
The Portuguese Bend landslide is a slow-moving mass of blocks and debris that extends from the beach to modest altitudes along a portion of the southern edge of the Palos Verdes Hills in coastal southern California.
To know more about landslide , click the below link
https://brainly.com/question/15973694
#SPJ4
mars's seasonal winds are driven primarily by group of answer choices dust vaporization of carbon dioxide ice. vaporization of water ice. changes in air pressure due to volcanic activity.
The seasonal winds on Mars are primarily driven by changes in air pressure due to volcanic activity.
The most important factor controlling the winds is the variation in pressure that is caused by the varying amounts of carbon dioxide, dust, and water ice in the atmosphere. During the Martian year, the atmospheric pressure can change drastically, as the air warms and cools over the course of a Martian year. The changes in pressure cause winds to blow from higher-pressure regions to lower-pressure regions. This pressure difference causes dust storms, as well as the polar winds which can be seen in images of the Martian surface. The amount of vaporization of carbon dioxide and water ice can also affect the wind speeds, but the main factor remains the pressure difference.
In conclusion, the seasonal winds on Mars are primarily driven by changes in air pressure due to volcanic activity. This pressure difference is caused by varying amounts of carbon dioxide, dust, and water ice in the atmosphere, resulting in dust storms and polar winds. The vaporization of carbon dioxide and water ice can also contribute to wind speed, but the main factor remains the pressure difference.
For more such questions on Martian seasons.
https://brainly.com/question/28203021#
#SPJ11
geography, or where a person grows up, can influence organizational culture. which example is not shaped by geography?
Geography, or where a person grows up, can influence organizational culture. The example that is not shaped by geography is the option D, eating sushi at lunch break
An employee wellness program is not shaped by geography because it is not related to the location or geography of the employees. It is related to the company's policy and strategy for promoting the health and wellbeing of its employees, regardless of where they live or grow up.
Therefore, this option is the correct answer to the question is option D.
To know more about geography refer here:
https://brainly.com/question/1462956#
#SPJ11
Complete Question:
Geography, or where a person grows up, can influence organizational culture. Which example is NOT shaped by geography?
A. siesta (a short afternoon nap) in some Latin American countries
B. Muslim's afternoon prayer session
C. wearing a traditional aloha shirt instead of a suit and tie to do business
D. eating sushi at lunch break
What are the 5 stages of solar system formation?
The 5 stages of solar system formation are Solar Nebula, Protostar and Protoplanetary Disk, Planetesimals, Protoplanets and Solar System.
The 5 stages of solar system formation are:
1. Solar Nebula: A cloud of dust and gas, called the solar nebula, begins to collapse due to gravitational forces. As it collapses, the material starts to spin and flatten into a disk shape.
2. Protostar and Protoplanetary Disk: The material in the center of the disk becomes denser, forming a protostar. Meanwhile, the remaining material in the disk starts to clump together, creating a protoplanetary disk around the protostar.
3. Planetesimals: Within the protoplanetary disk, solid particles collide and stick together, forming larger bodies called planetesimals. These planetesimals continue to grow as they collect more material from the disk.
4. Protoplanets: As planetesimals grow and interact, some merge through collisions, eventually forming larger bodies known as protoplanets. Protoplanets continue to evolve and differentiate, developing into the planets we observe in our solar system today.
5. Solar System: Over time, the protostar at the center of the system becomes a fully-fledged star (our Sun), while the remaining protoplanetary disk material is cleared out, leaving the planets, moons, asteroids, and other bodies orbiting the star. This marks the formation of the solar system.
For more about solar system:
https://brainly.com/question/12075871
#SPJ11
where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?
The safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk is South Dakota. Thus, Option D is correct.
This is due to its location in the stable interior of the North American Plate, far away from any active plate boundaries or faults.
South Dakota is located in the stable interior of the North American Plate, which means that it is far away from any active plate boundaries or faults. This location makes South Dakota less likely to experience earthquakes compared to other areas located near plate boundaries or faults.
Although earthquakes can occur anywhere, the risk is lower in South Dakota than in other areas such as California or Alaska. Therefore, South Dakota is considered the safest place among those listed below, in the 48 contiguous states with respect to earthquake seismic risk.
Based on this explanation, the correct answer is D.
The complete question:
Where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?
A. MissouriB. South CarolinaC. All have low seismic riskD. South DakotaE. MaineLearn more about earthquake seismic risk https://brainly.com/question/13758888
#SPJ11
which kind of seismic wave is responsible for the most shaking (and thus, the most damage to human structures)?
The body waves and surface waves responsible for the most shaking.The seismic wave responsible for the most shaking (and thus, the most damage to human structures) is the surface wave.
What are seismic waves?Seismic waves are waves that are generated by earthquakes and other disturbances in the Earth's surface, such as explosions, volcanic activity, and landslides.
They are made up of various types of waves, each with its own distinctive characteristics. There are two types of seismic waves: body waves and surface waves.
Body waves are seismic waves that travel through the Earth's interior. P-waves and S-waves are two types of body waves. Surface waves, on the other hand, are seismic waves that travel along the Earth's surface.
Rayleigh waves and Love waves are two types of surface waves.
Surface waves are responsible for the most shaking (and thus, the most damage to human structures).
The reason for this is that they travel more slowly than body waves, which allows them to cause more sustained shaking.
They are also more complex than body waves, which can cause them to interact with the Earth's surface in unpredictable ways that can lead to more intense shaking.
To know more about seismic wave refer here:
https://brainly.com/question/13056218#
#SPJ11