The time taken for the smokestack A is 22.5 hours.
The time taken for the smokestack B is 45 hours.
What is the time taken for the smokestack?
The time taken for the smokestack is calculated as follows;
Let's the rate at which smokestack B emits pollution = r
Then smokestack A = 2r
Their total rate of pollution combined;
= r + 2r
= 3r
The total amount of pollution they emitted after 15 hours;
= 3r x 15
= 45r pollution
The time taken for each to emit the same amount;
rate of B = r pollution/hr
time of B = 45r/r = 45 hours
rate of A = 2r
time of A = 45r/2r = 22.5 hours
Learn more about rate of pollution here: https://brainly.com/question/29028192
#SPJ1
The prices of a random sample of homes in four areas of a certain city (Areas A, B, C and D) were recorded and the following ANOVA table was obtained, and we would like to determine whether there is a difference in the mean price of homes among these three areas of the city at the significance level of 0.025. (Round your answers to 3 decimal places, if needed.) Source df SS MS F-Stat P- value 3 1.41 0.0464 Between Groups Within Groups Total 30 4.71 6.12 (a) What is the estimate of the common standard deviation? (b) What is the value of the tost statistic? (e) Which of the following is a valid conclusion for this hypothesis test at the significance level of 0.025? Select one: There is enough evidence to conclude that the mean price of homes are not all the same for these three areas There is enough evidence to conclude that the mean price of homes are the same for all three areas. There is not enough evidence to conclude that the mean price of homes are the same for all three areas There is not enough evidence to conclude that the mean price of homes are not all the same for these three areas. There is not enough information given in the question to make a conclusion. Check
"There is enough evidence to conclude that the mean price of homes are not all the same for these three areas."
(a) The estimate of the common standard deviation can be found by taking the square root of the mean square within groups: sqrt(0.0464) ≈ 0.215.
(b) The F-statistic is given as 1.41/0.0464 ≈ 30.43.
(c) The critical value for the F-distribution with 3 and 30 degrees of freedom at the 0.025 significance level is approximately 3.12 (obtained from a statistical table or calculator). Since the calculated F-statistic of 30.43 is greater than the critical value of 3.12, we reject the null hypothesis and conclude that there is enough evidence to conclude that the mean price of homes are not all the same for these three areas. Therefore, the valid conclusion for this hypothesis test at the significance level of 0.025 is: "There is enough evidence to conclude that the mean price of homes are not all the same for these three areas."
To learn more about hypothesis visit:
https://brainly.com/question/23056080
#SPJ11
A pair of standard since dice are rolled. Find the probability of rolling a sum of 12 with these dice.
P(D1 + D2 = 12) = ------
The probability of rolling a sum of 12 with these dice is 1/36.
The likelihood of rolling an entirety of 12 with two standard dice can be found utilizing the equation:
P(D1 + D2 = 12) = number of ways to induce an entirety of 12 / total possible results
There's as it were one way to roll a whole of 12: rolling a 6 on both dice.
The whole conceivable results can be found by noticing that there are 6 conceivable results for each dice roll, since each kick the bucket has 6 sides. In this manner, the whole number of conceivable results is:
6 x 6 = 36
So the likelihood of rolling a whole of 12 with two standard dice is:
P(D1 + D2 = 12) = 1/6 * 1/6 = 1/36
To know more about probability refer to this :
https://brainly.com/question/24756209
#SPJ1
Help me pls, Write the equation of the line in fully simplified slope-intercept form.
An equation of the line in fully simplified slope-intercept form include the following: y = -3x/2 + 8.
How to determine an equation of this line?In Mathematics and Geometry, the point-slope form of a straight line can be calculated by using the following mathematical expression:
y - y₁ = m(x - x₁)
Where:
x and y represent the data points.m represent the slope.First of all, we would determine the slope of this line;
Slope (m) = (y₂ - y₁)/(x₂ - x₁)
Slope (m) = (2 - 5)/(4 - 2)
Slope (m) = -3/2
At data point (2, 5) and a slope of -3/2, a linear equation for this line can be calculated by using the point-slope form as follows:
y - y₁ = m(x - x₁)
y - 5 = -3/2(x - 2)
y = -3x/2 + 3 + 5
y = -3x/2 + 8
Read more on point-slope here: brainly.com/question/24907633
#SPJ1
what would the radiusof a hemisphere be if the volume is 140000pi
Answer: [tex]10\sqrt[3]{210}[/tex] units, (about 59.4)
Step-by-step explanation:
a hemisphere is half a sphere.
the volume of a sphere is [tex]\frac{4}{3} \pi r^3[/tex]
since we need half of this, the volume of a hemisphere would be: [tex]\frac{4}{6} \pi r^3[/tex]
this simplified nicely to: [tex]\frac{2}{3} \pi r^3[/tex]
next, we want to find the radius, given the volume. So lets set up the equation.
[tex]140000\pi = \frac{2}{3} \pi r^3[/tex]
[tex]140000 = \frac{2}{3} r^3[/tex] --- cancel a pi from both sides.
[tex]210000 = r^3[/tex] ---- multiply both sides by 3/2 to cancel the 2/3.
[tex]\sqrt[3]{210000 }= r[/tex] ---- take the cube root of both sides to find r
[tex]10\sqrt[3]{210} = r[/tex]
Thats the exact answer: the radius is [tex]10\sqrt[3]{210}[/tex] units.
a decimal approximation is about 59.4 units.
the value of a house is increasing by 2400 per year. if it is worth 110,000 today, what will it be worth in four years
The value of house will be worth $119,600 in four years.
To calculate the value of the house in four years, we need to first determine the total increase in value over that period. Since the value is increasing by $2400 per year, the total increase over four years will be 4 times $2400, or $9600.
Next, we can add the total increase to the current value of the house to find the future value. The current value is given as $110,000, so adding the $9600 increase gives us a future value of $119,600.
Therefore, we can conclude that the value of house will be worth $119,600 in four years, assuming that the annual increase in value remains constant at $2400. It is important to note that this calculation is based on a simple linear model and does not take into account other factors that may affect the value of the house, such as changes in the housing market or renovations made to the property.
To learn about Linear data models, visit:
https://brainly.com/question/12016546
#SPJ11
You take out a compound interest loan of $200,000 at 6% annual interest to pay off your house. The period is 30 years. What payment is required each month?
The required monthly payment for this compound-interest loan is approximately $1,199.10.
Calculating the monthly payment for a compound-interest loan, you will need to use the following formula:
Monthly Payment = [tex]P (r (1 + r)^n) / ((1 + r)^n - 1)[/tex]
Where:
P, principal amount = $200,000
r, monthly interest rate = annual rate / 12
n, total number of payments = 30 years × 12 payments per year
For this loan:
P = $200,000
Annual Rate = 6% = 0.06
Monthly Rate (r) = 0.06 / 12 = 0.005
Number of Payments (n) = 30 * 12 = 360
Now, putting in the values into the formula:
Monthly Payment = 200,000 × (0.005 × [tex](1 + 0.005)^{360}) / ((1 + 0.005)^{360} - 1)[/tex]
Calculating this, you get:
Monthly Payment ≈ $1,199.10
To learn more about compound interest: https://brainly.com/question/28020457
#SPJ11
Desert Samaritan Hospital, locates in Mesa, Arizona, keeps records of emergency department traffic. Historical records reveal that, on average, the number of patients arriving per hour is 7, for the hour between 6 PM and 7 PM. State what distribution would be the most appropriate to use for calculating probabilities, the expected value, and the variance number of patients that arrive between 6 PM and 7 PM for a given day. Justify your answer. NOTE: You do not need to calculate anything for this question.
The emergency department of the hospital can be considered as a rare event occurring independently and with a constant rate (on average 7 per hour), which makes the Poisson distribution an appropriate choice.
The most appropriate distribution to use for calculating probabilities, expected value, and variance of the number of patients that arrive between 6 PM and 7 PM for a given day would be the Poisson distribution. The Poisson distribution is commonly used to model the number of occurrences of a rare event in a fixed period of time, where the events occur independently and with a constant rate. In this case, the number of patients arriving in the emergency department of the hospital can be considered as a rare event occurring independently and with a constant rate (on average 7 per hour), which makes the Poisson distribution an appropriate choice.
To learn more about department visit:
https://brainly.com/question/28013654?
#SPJ11
A strand of patio lanterns has 10 identical lights. If one light in the strand fails to work, the entire strand of lights will not work. In order to have a 90% probability that the entire strand of lights will work, what is the maximum probability of failure for each individual light?
The maximum allowable probability of failure for each individual light is approximately 0.00528, or 0.528%.
If we assume that the probability of each light failing is the same, let's call this probability "p".
To find the maximum allowable probability of failure for each individual light, we can use the binomial distribution.
The probability that the entire strand of lights works is given by the probability that all 10 lights work, which is (1-p)^10.
We want to find the value of p such that this probability is at least 0.9:
(1-p)^10 ≥ 0.9
Taking the logarithm of both sides:
10 log(1-p) ≥ log(0.9)
log(1-p) ≥ log(0.9)/10
1-p ≤ 10^(-log(0.9)/10)
p ≥ 1 - 10^(-log(0.9)/10)
p ≥ 0.00528
So the maximum allowable probability of failure for each individual light is approximately 0.00528, or 0.528%.
To learn more about maximum visit:
https://brainly.com/question/29499469
#SPJ11
80 divide by 6 help me now!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:13.33
Step-by-step explanation:
Let the random variables X, Y have joint density function
3(2−x)y if0
f(x,y) =
(a) Find the marginal density functions fX and fY.
(b) Calculate the probability that X + Y ≤ 1
(a) The marginal density functions fX and fY is FY(y) = 3y(2y+1)
(b)The probability that X + Y ≤ 1 is P(X + Y ≤ 1) = 5/16
(a) To discover the negligible thickness work of X, we coordinated the joint thickness work with regard to y over the extent of conceivable values of y:
fX(x) = ∫ f(x,y) dy = ∫ 3(2−x)y dy, 0<x<2
Assessing the necessary, we get:
fX(x) = (3/2)*(2-x)², 0<x<2
To discover the negligible thickness work of Y, we coordinated the joint thickness work with regard to x over the extent of conceivable values of x:
FY(y) = ∫ f(x,y) dx = ∫ 3(2−x)y dx, 0<y<1
Assessing the necessary, we get:
FY(y) = 3y(2y+1), 0<y<1
(b) To calculate the likelihood that X + Y ≤ 1, we got to coordinate the joint thickness work over the locale of the (x,y) plane where X + Y ≤ 1:
P(X + Y ≤ 1) = ∫∫ f(x,y) dA, where A is the locale X + Y ≤ 1
We will modify the condition X + Y ≤ 1 as y ≤ 1−x. So the limits of integration for y are to 1−x, and the limits of integration for x are to 1:
P(X + Y ≤ 1) = [tex]∫0^1 ∫0^(1−x)[/tex] 3(2−x)y dy dx
Evaluating the inner integral, we get:
[tex]∫0^(1−x)[/tex] 3(2−x)y dy = (3/2)*(2−x)*(1−x)²
Substituting this into the external indispensably, we get:
P(X + Y ≤ 1) = ∫0^(3/2)*(2−x)*(1−x)²dx
Assessing this necessarily, we get:
P(X + Y ≤ 1) = 5/16
Hence, the likelihood that X + Y ≤ 1 is 5/16.
To know more about probability refer to this :
https://brainly.com/question/24756209
#SPJ4
For each of the following pairs of vectors x and y, find the vector projection p of x onto y (a)x=[-5 4 5] and y= [3 -5 3] (b)x= cos(t) and y = [sin(t)cos(t)1] and y=[cos(t) -sin(t)3] where t is some angle P=
The vector projection of x onto y is p = [4 - sin^2(t)] / 10 [cos(t), -sin(t), 3].
(a) To find the vector projection of x onto y, we use the formula:
p = (x ⋅ y / ||y||^2) y
where ⋅ denotes the dot product and ||y|| is the magnitude of y.
First, we compute the dot product:
x ⋅ y = (-5)(3) + (4)(-5) + (5)(3) = -15 - 20 + 15 = -20
Next, we compute the magnitude of y:
||y|| = √(3^2 + (-5)^2 + 3^2) = √34
Now we can plug these values into the formula:
p = (-20 / 34) [3, -5, 3] = [-1.41, 2.35, -1.41]
Therefore, the vector projection of x onto y is p = [-1.41, 2.35, -1.41].
(b) To find the vector projection of x onto y, we use the same formula:
p = (x ⋅ y / ||y||^2) y
where ⋅ denotes the dot product and ||y|| is the magnitude of y.
First, we compute the dot product:
x ⋅ y = cos(t)cos(t) + sin(t)(-sin(t)) + 1(3) = cos^2(t) - sin^2(t) + 3
Next, we compute the magnitude of y:
||y|| = √(cos^2(t) + (-sin^2(t)) + 3^2) = √(cos^2(t) + sin^2(t) + 9) = √10
Now we can plug these values into the formula:
p = [cos^2(t) - sin^2(t) + 3] / 10 [cos(t), -sin(t), 3]
Simplifying the numerator, we get:
p = [(cos^2(t) + 3) - (sin^2(t))] / 10 [cos(t), -sin(t), 3]
Using the identity cos^2(t) + sin^2(t) = 1, we can simplify further:
p = [(1 + 3) - (sin^2(t))] / 10 [cos(t), -sin(t), 3]
p = [4 - sin^2(t)] / 10 [cos(t), -sin(t), 3]
Therefore, the vector projection of x onto y is p = [4 - sin^2(t)] / 10 [cos(t), -sin(t), 3].
To learn more about projection visit:
https://brainly.com/question/7484766
#SPJ11
if a score of 113 is 40%, what is the percentage of 84 out of
113?
To find the percentage of 84 out of 113, we need to first calculate what percentage of the total score 84 represents.
If a score of 113 is 40%, then we can set up a proportion:
113 / 100 = 40 / x
where x represents the percentage we are trying to find.
Cross-multiplying, we get:
113x = 4000
Dividing both sides by 113, we get:
x = 35.4
So, 84 represents approximately 35.4% of the total score of 113.
To learn more about Percentage & Score : https://brainly.com/question/24877689
#SPJ11
Write an equation for a line parallel to f(x) = -3x - 5 and passing through the point (2.-6). Show all steps
please see attached...
ignore 8/52 in the top right hand corner
The equation for a line parallel to f(x) = -3x - 5 and passing through the point (2, -6) is y = -3x.
An equation for a line parallel to f(x) = -3x - 5 and passing through the point (2, -6). Here are the steps:
Step 1: Identify the slope of the given line, f(x) = -3x - 5. Since it's in the form y = mx + b, where m is the slope, we see that the slope of the given line is -3.
Step 2: Since we want a line parallel to the given line, the slope of our new line will be the same, which is -3.
Step 3: Use the point-slope form of a linear equation, which is y - y1 = m(x - x1), where m is the slope and (x1, y1) is the point the line passes through. In this case, m = -3 and the point is (2, -6), so x1 = 2 and y1 = -6.
Step 4: Plug the values into the point-slope form equation: y - (-6) = -3(x - 2)
Step 5: Simplify the equation. First, change y - (-6) to y + 6, then distribute -3: y + 6 = -3x + 6
Step 6: Write the equation in slope-intercept form (y = mx + b) by subtracting 6 from both sides: y = -3x
So, the equation for a line parallel to f(x) = -3x - 5 and passing through the point (2, -6) is y = -3x.
parallel linehttps://brainly.com/question/18638718
#SPJ11
Using a significance level of p=0.05, which of the following statements best completes a chi-square goodness-of-fit test for a model of independent assortment?The calculated chi-square value is 3.91, and the critical value is 7.82. The null hypothesis cannot be rejected
Since the calculated chi-square value (3.91) is less than the critical value (7.82) and the significance level is 0.05, the null hypothesis cannot be rejected.
The null hypothesis in a chi-square goodness-of-fit test for independent assortment is that the observed data fits the expected data under the assumption of independent assortment. Therefore, we conclude that there is no significant difference between the observed and expected data under the assumption of independent assortment at a significance level of p=0.05.
Learn more about chi-square value here:
https://brainly.com/question/29774711
#SPJ11
Chandra runs the 100 meter sprint for the school track team. This season each of her finish times were under 18 seconds. Which inequality represents, x, Chandra’s finish times,in seconds, for any 100 meter sprint?
The inequality that projects Chandra's finish times, x, for any 100 meter sprint is x < 18 seconds. This is due to the reason of her finish times were under 18 seconds this season.
The inequality for finish times in a 100 meter sprint is applied to differentiate the performance of two or more athletes.
t1 - t2 > k
Here
t1 and t2 = finish times of two athletes
k = constant that depends on the level of competition and other factors. Inequality refers to the topic of an order relationship that is considered to be greater than,or equal to, less than, under two numbers or algebraic expressions.
To learn more about inequality
https://brainly.com/question/30238989
#SPJ4
You randomly select 500 students and observe that 85 of them smoke. Estimate the probability that a randomly selected student smokes.
a.) .27
b.) .50, since there are two possible outcomes for every student surveyed (smoke, don't smoke)
c.) 0.17
d.) 1.2
The randomly select 500 students and observe that 85 of them smoke. Estimate the probability that a randomly selected student smokes , the correct answer is 27.
To estimate the probability that a randomly selected student smokes, we use the proportion of students who smoke in our sample of 500. We observed that 85 out of 500 students smoke, so the proportion is: 85/500 = 0.17
To convert this proportion to a probability, we simply round to two decimal places: 0.17 ≈ 0.27
Therefore, the estimated probability that a randomly selected student smokes is approximately 0.27, which is answer choice a.
Learn more about probability here: brainly.com/question/30034780
#SPJ11
Mookie Betts of the Boston Red Sox had the highest batting average for the 2018 Major League Baseball season. His average was 0.364. So, the likelihood of his getting a hit is 0.364 for each time he bats. Assume he has seven times at bat tonight in the Red Sox-Yankee game. a. This is an example of what type of probability? Type of probability b. What is the probability of getting seven hits in tonight's game? (Round your answer to 3 decimal places.) Probability c. Are you assuming his second at bat is independent or mutually exclusive of his first at bat? Assumption d. What is the probability of not getting any hits in the game? (Round your answer to 3 decimal places.) Probability What is the probability of not getting any hits in the game? (Round your answer to 3 decimal places.) Probability e. What is the probability of getting at least one hit? (Round your answer to 3 decimal places.) Probability
a) Required probability is independent probability.
b) Required game is 0.000025.
c)Each at-bat is independent of the others.
d) Required probability is 0.0036.
e) Required probability is 0.9964.
a. The given incident is an example of independent probability.
b. The probability of getting seven hits in tonight's game is [tex]0.364^7 = 0.000025[/tex] (rounded to 3 decimal places).
c. Yes, we can assume that each at-bat is independent of the others.
d. The probability of not getting any hits in the game is [tex](1 - 0.364)^7 = 0.0036[/tex](rounded to 3 decimal places).
e. The probability of getting at least one hit is equal to the complement of the probability getting any hits, which is [tex]1 - 0.0036 = 0.9964[/tex] (rounded to 3 decimal places).
Learn more about probability here,
https://brainly.com/question/13604758
#SPJ4
what are the exact values of the cosecant, secant, and cotangent ratios of -7pi/4 radians?
The exact values of the cosecant, secant, and cotangent ratios of -7pi/4 radians are -√(2), -√(2), and 1.
Here are the exact values of the cosecant, secant, and cotangent ratios of -7π/4 radians:
The cosecant of an angle is equal to the length of the hypotenuse of a right triangle with that angle as its opposite side, divided by the length of the opposite side. The formula for cosecant is cosec(θ) = 1/sin(θ).
In this case, the sine of -7π/4 radians is -√(2)/2, so the cosecant is -2/√(2), which simplifies to -√(2).
The secant of an angle is equal to the length of the hypotenuse of a right triangle with that angle as its adjacent side, divided by the length of the adjacent side. The formula for secant is sec(θ) = 1/cos(θ).
In this case, the cosine of -7π/4 radians is -√(2)/2, so the secant is -2/√(2), which simplifies to -√(2).
The cotangent of an angle is equal to the length of the adjacent side of a right triangle with that angle as its opposite side, divided by the length of the opposite side.
The formula for cotangent is cot(θ) = 1/tan(θ). In this case, the tangent of -7π/4 radians is 1, so the cotangent is 1.
To know more about radians here
https://brainly.com/question/7721249
#SPJ1
find a polynomial function f(x) of least degree having only real coefficients and zeros of 5 and 2-i
To find a polynomial function f(x) of least degree having only real coefficients and zeros of 5 and 2-i, we know that the complex conjugate of 2-i, which is 2+i, must also be a zero. This is because complex zeros of polynomials always come in conjugate pairs.
So, we can start by using the factored form of a polynomial:
f(x) = a(x - r1)(x - r2)(x - r3)...
where a is a constant and r1, r2, r3, etc. are the zeros of the polynomial. In this case, we have:
f(x) = a(x - 5)(x - (2-i))(x - (2+i))
Multiplying out the factors, we get:
f(x) = a(x - 5)((x - 2) - i)((x - 2) + i)
f(x) = a(x - 5)((x - 2)^2 - i^2)
f(x) = a(x - 5)((x - 2)^2 + 1)
To make sure that f(x) only has real coefficients, we need to get rid of the complex i term. We can do this by multiplying out the squared term and using the fact that i^2 = -1:
f(x) = a(x - 5)((x^2 - 4x + 4) + 1)
f(x) = a(x - 5)(x^2 - 4x + 5)
Now, we just need to find the value of a that makes the degree of f(x) as small as possible. We know that the degree of a polynomial is determined by the highest power of x that appears, so we need to expand the expression and simplify to find the degree:
f(x) = a(x^3 - 9x^2 + 24x - 25)
Degree of f(x) = 3
Since we want the least degree possible, we want the coefficient of the x^3 term to be 1. So, we can choose a = 1:
f(x) = (x - 5)(x^2 - 4x + 5)
Degree of f(x) = 3
Therefore, the polynomial function f(x) of least degree having only real coefficients and zeros of 5 and 2-i is:
f(x) = (x - 5)(x^2 - 4x + 5)
To find a polynomial function f(x) of least degree with real coefficients and zeros of 5 and 2-i, we need to remember that if a polynomial has real coefficients and has a complex zero (in this case, 2-i), its conjugate (2+i) is also a zero.
Step 1: Identify the zeros
Zeros are: 5, 2-i, and 2+i (including the conjugate)
Step 2: Create factors from zeros
Factors are: (x-5), (x-(2-i)), and (x-(2+i))
Step 3: Simplify the factors
Simplified factors are: (x-5), (x-2+i), and (x-2-i)
Step 4: Multiply the factors together
f(x) = (x-5) * (x-2+i) * (x-2-i)
Step 5: Expand the polynomial
f(x) = (x-5) * [(x-2)^2 - (i)^2] (by using (a+b)(a-b) = a^2 - b^2 formula)
f(x) = (x-5) * [(x-2)^2 - (-1)] (since i^2 = -1)
f(x) = (x-5) * [(x-2)^2 + 1]
Now we have a polynomial function f(x) of least degree with real coefficients and zeros of 5, 2-i, and 2+i:
f(x) = (x-5) * [(x-2)^2 + 1]
Learn more about polynomial functions here:- brainly.com/question/12976257
#SPJ11
Current Attempt in Progress A population proportion is 0.61. Suppose a random sample of 656 items is sampled randomly from this population Appendix A Statistical Tables a. What is the probability that the sample proportion is greater than 0.643 b. What is the probability that the sample proportion is between 0.60 and 0.647 c Whiat is the probability that the sample proportion is greater than 0.607 d. What is the probability that the sample proportion is between 0.57 and 0.597 e. What is the probability that the sample proportion is less than 0.517 (Round values of 2 to 2 decimal places, 4.9. 15.25 and final answers to 4 decimal places, eg. 0.2513) b. (Round values of z to 2 decimal places, eg. 15.25 and final answers to 4 decimal places, eg. 0.2513) a. b. C d. Attempts:0 of 3 used suht Arrower
We first calculate the z-score:
z = (0.517 - 0.61) / sqrt((0.61 * (1 - 0
To solve these probability questions, we need to use the central limit theorem, which states that if we have a large enough sample size, the sampling distribution of the sample proportion will be approximately normal, regardless of the population distribution.
For a sample of size n, the mean of the sample proportion (p) is equal to the population proportion (p), and the standard deviation of the sample proportion (σp) is equal to:
σp = sqrt((p(1-p))/n)
Using this information, we can standardize the sample proportion using z-score:
z = (p - p) / σp
Then, we can use the standard normal distribution table (such as Appendix A Statistical Tables) to find the probabilities.
a) What is the probability that the sample proportion is greater than 0.643?
We first calculate the z-score:
z = (0.643 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = 3.17
Using the standard normal distribution table, the probability of getting a z-score greater than 3.17 is approximately 0.0008.
Therefore, the probability that the sample proportion is greater than 0.643 is 0.0008.
b) What is the probability that the sample proportion is between 0.60 and 0.647?
We need to calculate the z-scores for both values:
z1 = (0.60 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = -1.23
z2 = (0.647 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = 1.79
Using the standard normal distribution table, the probability of getting a z-score between -1.23 and 1.79 is approximately 0.8438.
Therefore, the probability that the sample proportion is between 0.60 and 0.647 is 0.8438.
c) What is the probability that the sample proportion is greater than 0.607?
We first calculate the z-score:
z = (0.607 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = -0.73
Using the standard normal distribution table, the probability of getting a z-score greater than -0.73 is approximately 0.7665.
Therefore, the probability that the sample proportion is greater than 0.607 is 0.7665.
d) What is the probability that the sample proportion is between 0.57 and 0.597?
We need to calculate the z-scores for both values:
z1 = (0.57 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = -4.13
z2 = (0.597 - 0.61) / sqrt((0.61 * (1 - 0.61)) / 656) = -1.08
Using the standard normal distribution table, the probability of getting a z-score between -4.13 and -1.08 is approximately 0.0361.
Therefore, the probability that the sample proportion is between 0.57 and 0.597 is 0.0361.
e) What is the probability that the sample proportion is less than 0.517?
We first calculate the z-score:
z = (0.517 - 0.61) / sqrt((0.61 * (1 - 0
To learn more about proportion visit:
https://brainly.com/question/29474065
#SPJ11
The area of a rectangular field is (x² + 8x + 15) sq. m.
(i) Find the length and breadth of the field. (ii) Find the perimeter of the field.
Use any of the methods to determine whether the series converges or diverges. Give reasons for your answer.∑[infinity]->k=1 [(k^(2)−k+1) / (3k^(4)+2k^(2)+1)]
Answer:
converges.
Step-by-step explanation:
We can use the ratio test to determine whether the series converges or diverges.
The ratio test states that for a series ∑aₙ, if the limit of the absolute value of the ratio of successive terms is less than 1, then the series converges absolutely. If the limit is greater than 1 or does not exist, then the series diverges.
Let's apply the ratio test to the given series:
lim k→∞ |(k^(2+1)−k+2) / (3(k+1)^(4)+2(k+1)^(2)+1) * (3k^(4)+2k^(2)+1) / (k^(2)−k+1)|
= lim k→∞ |(3k^(6) + 8k^(5) - 5k^(4) - 6k^(3) + 9k^(2) + 2k + 1) / (3k^(6) + 12k^(5) + 23k^(4) + 22k^(3) + 13k^(2) + 4k + 1)|
= 3/3 = 1
Since the limit of the absolute value of the ratio of successive terms is 1, the ratio test is inconclusive. We need to use another test.
Let's try the limit comparison test, where we compare the given series to another series whose convergence or divergence is known.
We can choose the series ∑[infinity]->k=1 1/k^(2). This series converges by the p-series test since p=2>1.
Now, let's find the limit of the ratio of the two series:
lim k→∞ [(k^(2)−k+1) / (3k^(4)+2k^(2)+1)] / (1/k^(2))
= lim k→∞ k^(4)(k^(2)-k+1)/(3k^(4)+2k^(2)+1)
= 1/3
Since the limit is a finite positive number, both series have the same convergence behavior. Therefore, the given series converges by comparison to the convergent series ∑[infinity]->k=1 1/k^(2).
Therefore, the given series converges.
The given series can be determined to be a convergent series using the Limit Comparison Test.
To apply the Limit Comparison Test, we need to find another series whose behavior is known. We can do this by simplifying the given series by dividing both the numerator and denominator by k^4. This gives us:
[(k^2/k^4) - (k/k^4) + (1/k^4)] / [3 + (2/k^2) + (1/k^4)]
Now, as k approaches infinity, all the terms containing k will approach zero, leaving us with:
[0 - 0 + 1/k^4] / [3 + 0 + 0]
Simplifying this expression further gives us:
1 / 3k^4
Now, we can compare this to the known convergent p-series, 1/k^2, by taking the limit of the ratio of their terms as k approaches infinity:
lim as k -> infinity of [(1/3k^4)/(1/k^2)] = lim as k -> infinity of (k^(-2))/3 = 0
Since the limit is a finite value, we can conclude that the given series is convergent by the Limit Comparison Test. Therefore, the series converges.
To learn more about Limit Comparison Test, visit:
https://brainly.com/question/30758037
#SPJ11
DATA contains Part Quality data of three Suppliers. At a = 0.05, does Part Quality depend on Supplier, or should the cheapest Supplier be chosen? a. None of the answers fit the data. b. pvalue of 0.039 rejects the assumption of independence of Part Quality and Supplier. Further supplier evaluation is recommended. c. The assumption of independence of Part Quality and Supplier cannot be rejected. Choose the cheapest Supplier. d. Pvalue of 0.008 rejects the assumption of independence of Part Quality and Supplier. Further supplier evaluation is recommended. e. Pvalue of 0.0008 rejects the assumption of independence of Part Quality and Supplier. Further supplier evaluation is recommended. Hide hint for Question 20 Test independence of Supplier and Part Quality. Supplier Good А 100 B 160 С 150 Part Quality Minor Defect Major Defect 5 8 27 4 7 11
P value of 0.039 rejects the assumption of independence of Part Quality and Supplier. Further supplier evaluation is recommended.
To answer this question, we need to perform a chi-square test of independence to determine if Part Quality depends on Supplier. The given data is:
Supplier Good Minor Defect Major Defect
A 100 5 8
B 160 4 7
C 150 27 11
Step 1: Calculate the expected values for each cell.
Step 2: Apply the chi-square test formula: χ² = Σ[(O - E)² / E], where O is the observed value and E is the expected value.
Step 3: Calculate the p-value using the chi-square distribution with the appropriate degrees of freedom. In this case, df = (number of rows - 1) * (number of columns - 1) = (3 - 1) * (3 - 1) = 4.
Step 4: Compare the p-value to the given significance level (α = 0.05). If the p-value is less than α, reject the null hypothesis and conclude that Part Quality depends on Supplier.
Based on the given data, the correct answer is b. P value of 0.039 rejects the assumption of independence of Part Quality and Supplier. Further supplier evaluation is recommended.
Learn more about chi-square test,
https://brainly.com/question/30355927
#SPJ11
Jim builds a robot that travels no more than 8 feet per minute. Graph the inequality showing the relationship between the distance traveled and the time elapsed. Is it possible for the robot to travel 18 feet in 2.5 minutes
Answer: yes
Step-by-step explanation:
An individual is hosting a cookout for the kick ball team. The individual wants to have two hot dogs for each guest, and 6 extra hot logs in case some teammates bring friends. Solve for the dependent variable (y)if the independent variable is 10 1. У= 30
2. У = 26
3. y = 20
The correct answer is: 2. y = 26
To solve for the dependent variable (y), we need to use the given information that the individual wants to have two hot dogs for each guest and 6 extra hot dogs for potential friends.
If the independent variable is 10, then the total number of guests would be 10.
So, the equation to find the number of hot dogs needed (y) would be:
y = (2 hot dogs per guest) x 10 guests + 6 extra hot dogs
y = 20 + 6
y = 26
.
An individual is hosting a cookout for the kickball team and wants to have two hot dogs for each guest (x), and 6 extra hot dogs in case some teammates bring friends. The independent variable (x) is 10. To solve for the dependent variable (y), we use the equation:
y = 2x + 6
Now, substitute the value of x:
y = 2(10) + 6
y = 20 + 6
y = 26
Know more about dependent variable here:
https://brainly.com/question/29430246
#SPJ11
Write the equation of a line with zero slope that passes through (3,28).?
To write the equation of a line with zero slope that passes through the point (3, 28)= y = 28
we first need to understand what a zero slope means. A zero slope indicates that the line is horizontal, meaning it doesn't rise or fall as it moves horizontally. This means that the y-value of every point on the line is constant.
Since the line passes through the point (3, 28), we know that the constant y-value is 28. Thus, the equation of the line with zero slope passing through (3, 28) is simply:
y = 28
This equation represents a horizontal line that goes through all points with a y-coordinate of 28, including the given point (3, 28).
For more questions on zero slope - https://brainly.com/question/30286403
#SPJ11
find the measure of arc
Answer:
its D: 56Step-by-step explanation:
I knew this because i got this wright on my assignment
In △ A B C , ∠ C is a right angle and sin A = 4 5 . What is the ratio of cos A?
The ratio of the trigonometric function of the right triangle, cos A is 3/5.
Given that,
In △ABC , ∠C is a right angle.
Then the opposite side to the right angle will be the hypotenuse.
So AB is the hypotenuse.
Sin A = BC / AB [ Since sine of an angle is opposite side / hypotenuse]
BC / AB = 4/5
BC = 4 and AB = 5
Using the Pythagoras theorem,
Third side, AC = √(5² - 4²) = 3
Cos of an angle is the ratio of adjacent side to the hypotenuse.
Cos A = 3/5
Alternatively, we can use the identity,
sin²A + cos²A = 1
to find the value of cos A.
Hence the value of cos A is 3/5.
Learn more about Trigonometric Functions here :
https://brainly.com/question/29269112
#SPJ1
if g is not cyclic, prove that all elements of g have order 1,2, or 3. show that in fact that there must be an element of order 3.
It is proved that if g is not cyclic, all elements of g have order 1, 2, or 3, and there must be an element of order 3.
To prove that if g is not cyclic, all elements of g have order 1, 2, or 3, and show that there must be an element of order 3, follow these steps,
1. Assume that g is a finite group and is not cyclic.
2. Recall that the order of an element a in group g is the smallest positive integer n such that a^n = e, where e is the identity element in g.
3. If g were cyclic, it would have an element a with order equal to the order of the group itself (|g|). However, we are given that g is not cyclic, so the order of any element in g must be less than |g|.
4. We now consider the possibilities for the order of elements in g. If all elements of g have order 1, then g is the trivial group, which is cyclic, contradicting our assumption.
5. If there is an element of order 2, there must be an element of order 3 as well. This is because, according to Cauchy's theorem, if a prime number p divides the order of a finite group g, then g has an element of order p. Since we have assumed that g is not cyclic, |g| must be divisible by at least two prime numbers. The smallest possible case is when |g| is divisible by the primes 2 and 3.
6. By Cauchy's theorem, since 2 and 3 both divide |g|, there must be elements in g of order 2 and order 3.
7. Therefore, if g is not cyclic, all elements of g have order 1, 2, or 3, and there must be an element of order 3.
Learn more about "order": https://brainly.com/question/1094377
#SPJ11
How do you answer this question?:
5x^2+14x=x+6
The solutions to the equation 5x²+14x=x+6 are x = 4/5 or x = -3 we solved by using quadratic formula
The given equation is 5x²+14x=x+6
We have to solve for x
Subtract x from both sides
5x²+13x=6
Subtract 6 from both sides
5x²+13x-6=0
Now we can use the quadratic formula to solve for x:
x = (-b ± √(b²- 4ac)) / 2a
where a = 5, b = 13, and c = -6.
Substituting these values and simplifying:
x = (-13 ±√(13²- 4(5)(-6))) / (2 × 5)
x = (-13 ± √289)) / 10
x = (-13 ± 17) / 10
So we get two solutions:
x = 4/5 or x = -3
Therefore, the solutions to the equation 5x^2 + 14x = x + 6 are x = 4/5 or x = -3.
To learn more on Quadratic equation click:
https://brainly.com/question/17177510
#SPJ1