Engineering College

7. The dimensional volume contained in a standard full-size welding cylinder is blank cubic feet.
A. 5 to 10
B. 20 to 30
C. 100
D. 1.5 to 2

Answers

Answer 1

Answer:

I say C

Explanation:

Related Questions

ech a says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren’t worn out. tech b says that brake shoes should be replaced in axle sets. who is correct?

Answers

Based on the information provided, the technician who is correct is: B. Technician B.

What is a braking system?

A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.

How to diagnose a brake system?

In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:

NoisesSmellsAbnormal brake pedal movements.Improper braking action.

Based on the information provided, we can reasonably infer and logically deduce that the technician who is correct is Technician B because brake shoes are to be replaced in axle sets.

Read more on braking system here: https://brainly.com/question/24751467

#SPJ1

Complete Question:

Tech a says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren’t worn out. tech b says that brake shoes should be replaced in axle sets. who is correct?

Technician A.

Technician B.

Neither Technician A nor Technician B

Both Technician A and Technician B

tech a says that black exhaust indicates a very rich-running engine. tech b says that white exhaust can indicate coolant in the exhaust. who is correct?

Answers

Since tech A says that black exhaust indicates a very rich-running engine is false and since tech b says that white exhaust can indicate coolant in the exhaust, Tech B  is correct.

What does it mean when your exhaust pipe is black?

Black exhaust smoke is known to be one that can show up if the vehicle is said to be burning too much fuel.

Note that this situation could be as a result of  a clogged air filter, the malfunctioning of the fuel injection system, a blocked manifold, or other forms of issues.

Therefore, Since tech A says that black exhaust indicates a very rich-running engine is false and since tech b says that white exhaust can indicate coolant in the exhaust, Tech B  is correct.

Learn more about exhaust from

https://brainly.com/question/12741044
#SPJ1

__________ is the classification of a building or structure into one of the five types or subtypes included in the model building codes, based on types of materials and structural protection afforded.

Answers

Construction Classification is the classification of a building or structure into one of the five types or subtypes included in the model building codes, based on types of materials and structural protection afforded.

What is a building?

A building can be defined as a structure which has a roof and a wall a building is a permanent structure which has a base and a very study materials which are being used to create a stable structure with a foundation.

Construction classification can be defined as type of building construction which is being legalized by the people. These the building reduces that quality damages also it provides a safe and sound structure with is often guarded.

Learn more about building, here:

https://brainly.com/question/6372674

#SPJ1


[tex]V_{rms} = 20 < 60° V\\ I_{rms} = 2 < 23.1°A [/tex]

What is the complex power S?
(A) (1.9 + j24) VA
(B) (16.4 + j21.1) VA
(C) (7,8 - j16.5) VA
(D) (21.1 + j16.4) VA​

Answers

Explanation:

Now we change into rectangular form

=40 cos (36.9°) +j 40 sin (36.9°) VA

=31.9+J24VA

Hence, correct option (31.9 +j 24) VA

How many grains are on the surface of the head of a pin? assume that the head of a pin is spherical with a 1-mm diameter and has an astm grain size of 10

Answers

Answer:

Given, diameter of pin head d = 1 mm = 1/25.4 = 0.0394 in Surface area of a pinhead, A = 4pr^2 =

Explanation:

eesh

I don’t know where did the prerson come from?

Answers

Answer:

I am from Nepal where are you from

I’m from the United States

A 13.2 KV circuit has a 10,000 kVA load with a 0.85 lagging power factor. How much capacitive reactive power (in KVAR) is needed to conect the P.F. to 0.97 lagging?
​

Answers

Explanation:

Solving for the capacitive reactive power, we have

Qc = 8,500 (tan(-cos (0.85)) - tan(-cos¹ (0.97)))

Qc = -3137.5261 = -3138 KVAR

a threaded rod has 11 threads per inch how many threads are there in 16 inches of the rod

Answers

The number of threads in 16 inches of the rod is 176 threads

Calculation and Parameters

Given that:

1 threaded rod= 11 threads per inch

Therefore, to find the number of threads in 16 inches of the rod,

We would have to multiply and this is given below:

16 * 11= 176 threads

This answer is gotten because a threaded rod has 11 threads per inch and when there are 16 inches of rod, to find the number of inches, you would have to multiply the values together.

Read more about calculations here:

https://brainly.com/question/2005046

#SPJ1

A shaft of a circular cross section is supported by two housings at B and C. The shaft
is subjected to static loads: concentrated force N applied by gear D and an applied torque T. The yielding strength of the shaft is Sy, and the diameter of the shaft is d. For circular cross sections, | = nd*/64, J = md*/32. The length of the shaft is L. Transverse shear stress is ignored here.

1) Draw the bending moment diagram of the shaft. Specify the location of the weakest (most dangerous) cross section A on bending moment diagram.

2) Draw the weakest point(s) on cross section A.

3) Determine the von-Mises stress at the weakest point(s).

4) Determine the factor of safety n based on Distortion Energy Theory.

Answers

Answer:

1) The bending moment diagram of the shaft is shown in Figure 1. The weakest cross section A is located at the point where the bending moment is maximum.

2) The weakest point on cross section A is located at the point where the bending moment is maximum.

3) The von-Mises stress at the weakest point is given by:

σ = M/I

where M is the bending moment and I is the moment of inertia of the cross section.

4) The factor of safety n is given by:

n = Sy/σ

where Sy is the yield strength of the shaft and σ is the von-Mises stress at the weakest point.

Explanation:

Hope this helps!

Express (-75+j45) in Phasor form.​

Answers

Explanation:

Note that the working equation that converts a complex number from rectangular to phasor form is given by

a+bi=r 20

Hence, the equivalent in phasor form is 87.46<149.04°

Which is the engineering name of the complicated circuit board in EC circuits​

Answers

Which is the engineering name of the complicated circuit board in EC circuits?

A Printed Circuit Board (PCB) or a Printed Wired Board (PWB)

Answer:

PCB (Printed Circuit Board)

Explanation:

Construction:

Initially, this board is an insulator plate. A circuit diagram is clearly drawn by a computer and scanned.

This plate is put under a multipurpose printer and the circuit is printed onto the plate with conductive copper tiny plates and wires.

Other Questions
mike and his family lost their home and belongings in a major earthquake that hit their town. they left their homeland to begin afresh in a neighboring country. in this scenario, mike and his family are . Explain why capacitance should be inversely proportional to the separation between the plates of a capacitor. A writer is most likely engaging in paraphrasing plagiarism when he or she ______. Which integer is greater, -5 or -7 ? a cosmetics manufacturers marketing department has developed a linear trend equation that can be used to predict annual sales of its popular hand Michael has $96 in savings and makes $12.00 an hour at his job. Greg has $128 in savings and makes $10.00 an hour his job. They both save all their earned money. How many hours they both have to work to have the same amount of money saved? Would a court rescind a contract for sale of land even though both parties originally thought the land was worthless but it turned out to be very valuable? western cultures are more relaxed about social status, and input from subordinates is tolerated and even encouraged. time orientation communication style power distance individualism What is the key difference between command and market economies? Group of answer choices A market economy places a strong emphasis on a small group holding responsibility for planning production. A command economy considers private property essential to protect, while a market economy places no value on private property. The basic economic questions are unaddressed in a market economy. Households answer the basic economic questions in a market economy, while a group of leaders answer them in a command economy. A command economy depends much more on the principle of the invisible hand. to verify the identification, a shall be conducted for all personnel that have access to fbi cjis systems. the an and the and is it the a nurse is teaching a client who has a new prescription for ciprofloxacin to treat an uncomplicated uti. which of the following instructions should the nurse include? Bolt enterprises receives $100,000 cash from its customers on account. bolt uses the cash to pay off $100,000 on a bank loan, the net result is that? What is density?A.The volume of an object.B.The weight of an object.C.The measure of mass of a material within a given space.D.The mass of an object.+11 points A divergent boundary is different than a convergent boundary in that question 19 options: plates slide next to each other in a divergent boundary and collide in a convergent boundary. plates spread apart in a divergent boundary and collide in a convergent boundary. plates collide in a divergent boundary and slide next to each other in a convergent boundary. plates slide next to each other in a divergent boundary and and spread apart in a convergent boundary. Which of the following is NOT a monomer?Which of the following is NOT a monomer?a glucose moleculean amino acida nucleotidea protein Which is the better deal? 16 oz of jelly for $3.30 or 48 oz of jelly for $8.64 Compare and contrast chaparral biome and rainforest biome Idrk what to name this but- just only answer if you are sure OA. Handel wrote some of the most famous works of classical musicever.B. People pushed and shoved to get inside the store where the dealswaited.C. The groom froze in place, wondering if he had made a hugemistake.D. Mr. Gutierrez wrote an equation on the board, and Amy raised herhand.