Answer:
80g
Explanation:
The law of conservation of matter states that matter cannot be created nor destroyed. Basically, whatever mass you have at the beginning of a reaction, should be the same as at the end of the reaction on the product side.
Since here it lets you know that a total of 100g (30g + 70g) were produced on the product side, that means that we started off with 100g in our reactant side.
We have given that one material is 20g on our reactant side but we need the mass of the other. To find the mass of the other material, simply subtract 20g from the total mass created on the product side.
100g - 20g = 80g
The 80g would be the missing amount from the reactant side that isn't stated.
Which of the following statements about temperature scales are correct? Select all that apply.
Zero on the Kelvin scale corresponds to absolute zero.
The Kelvin and Fahrenheit scales are commonly used in chemistry.
The units the Celsius and Fahrenheit scales are both called degrees.
Water boils at 273 K on the Kelvin scale.
Zero on the Kelvin scale corresponds to absolute zero this statements about temperature scales is correct
What is Temperature scales ?Using a beginning point (0 or zero) and a unit of measurement, a temperature scale can be used to indicate or measure temperature. This is typically accomplished by designating certain physical events as occurring at 0 and 100 degrees Fahrenheit, respectively, at specific temperatures, such as the freezing and boiling points of water.
The Fahrenheit and Celsius (Centigrade) systems are the two most often used temperature scales. Due to the fact that all molecular activity stops at the zero points of the Rankin and Kelvin scales, two other scales, they are known as the absolute scales. This location is referred to as absolute zero.Learn more about Temperature scales here:
https://brainly.com/question/24853133
#SPJ13
What two properties change that would cause a boiled egg to drop into a container, that’s mouth was smaller than the egg? 1. Temperature 2. Pressure 3. Volume 4. Number of particles
Answer:
2. Pressure
4. Number of particles.
Explanation:
If we drop a boiled egg into a container with a smaller mouth than the egg, we can note a change in the pressure inside the container, because initially, we have the atmospheric pressure inside the container but the egg will impose a different pressure inside; and the number of particles will be affected too because we suppose that the container is exchanging particles with the ambient so we wouldn't have an exact amount of particles in the container because of this exchange dynamic, so if the egg is covering the mouth of the container, the number of particles would be constant.
The answers would be 2. Pressure and 4. Number of particles.
A 6.5 L gas sample at 298 K and 0.51
atm expands until a volume of 9.9 L is
reached. What will be the final
temperature if the final pressure is
0.65 atm? Please show the work.
The final temperature if the final pressure is 0.65 atm will be 585 K
It is given that
Initial Volume of sample = V1 = 6.5 L
Initial temperature = T1 = 298 K
Initial pressure = P1 = 0.51 atm
Final Volume = V2 = 9.9 L
Final temperature = T2 = ?
Final pressure = P2 = 0.65 atm
Gay-Lussac's law - The pressure of a gas is directly proportional to the. temperature when volume and amount of substance is constant. P1/T1 = P2/T2 Combined gas law P1V1/T1 = P2V2/T2 Use the gas laws for pressure, volume and temperature calculations.
P1V1/T1 = P2V2/T2
0.52 x 6.5/298 = 0.65 x 9.9/T2
0.011 = 6.435/T2
T2 = 585 K
Hence, final temperature if the final pressure is 0.65 atm will be 585 K
Learn more about Temperature here:
https://brainly.com/question/25677592
#SPJ13
During a titration, an endpoint was reached after adding 20 mL of sodium hydroxide solution, NaOH(aq), to 20 mL of sulfuric acid, H2SO4. The sodium hydroxide solution had a concentration of 1.50 mol/L. What was the initial concentration of the sulfuric acid? Select one: a. 1.50 mol/L b. 2.25 mol/L c. 3 mol/L d. 0.75 mol/L
Write the balanced chemical equation for the reaction as follows:
[tex]2NaOH+H_2SO_4\rightarrow Na_2SO_4+2H_2O[/tex]Given:
Concentration of sodium hydroxide =1.50 mol/L
Volume of sodium hydroxide = 20 mL
Concentration of sulfuric acid = x
Volume of sulfuric acid = 20 mL
Firstly, we will determine the moles that is in 20 mL of 1.5 M NaOH:
[tex]\begin{gathered} 1.5\text{ }mole=1000mL \\ x\text{ }mol=20mL \\ \\ x=\frac{1.5mol\times20mL}{1000mL} \\ \\ x=0.03mol\text{ }NaOH \end{gathered}[/tex]Based on the balanced chemical equation and the moles of NaOH we can use stoichiometry (ratios) to determine the moles of 20 mL sulfuric acid:
[tex]0.03mol\text{ }NaOH\times\frac{1mol\text{ }H_2SO_4}{2mol\text{ }NaOH}=0.015\text{ }mol[/tex]Now that we know how many moles are in 20 mL of H2SO4, we can determine the moles in 1000mL (initial concentration):
[tex]\begin{gathered} 0.015\text{ }mol=20\text{ }mL \\ x\text{ }mol=1000\text{ }mL \\ x=\frac{0.015mol\times1000mL}{20mL} \\ \\ x=0.75mol•L^{-1} \end{gathered}[/tex]Answer: D) 0.75 mol/L,
A solution is prepared by mixing 500. mL of 0.10 M NaOCl and 500. mL of 0.20 M HOCl. What is the pH of this solution? [Ka(HOCl) = 3.2 × 10–8 ]
The pH of the solution is calculated as 7.2.
What is the pH of the solution?Let us recall that we can make us of the Henderson–Hasselbalch equation
to obtain the pH of the solution if we would follow the steps that have been itemized below.
Number of moles of the acid = 500/1000 L * 0.20 M = 0.1 moles
Number of moles of salt = 500/1000 L * 0.1 M = 0.05 moles
Total volume of the solution = 500 mL + 500 mL = 1000 mL or 1L
Now;
Molarity of the acid = 0.1 moles/1 L = 0.1 mol L-1
Molarity of the salt = 0.05 moles/1 L = 0.05 molL-1
Then we apply the equation;
pH = pKa + log[(A-)/(HA)]
pKa = - log (Ka) = - log(3.2 × 10^–8) = 7.5
Thus we have;
pH = 7.5 + log (0.05/0.1)
pH = 7.5 - 0.3
pH = 7.2
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
A scientist uses a graduated cylinder to measure 100.0 mL of gasoline for an experiment. The density of gasoline is 0.774 g/mL. What is the mass of this gasoline sample?
Answer:
100ml x 0.774
divide by 4
x by 8
Name the attatched alkene
Answer:
limonene molecule.
Explanation:
identify the functional group and name the compound ch3ch2ch2ch2ch2ch2cho
Answer: valeraldehyde
Explanation:
I had to memorize this one
The functional group present is aldehyde and name of compound is valeraldehyde.
What are functional groups?Functional group is defined as a substituent or group of toms or an atom which causes chemical reactions.Each functional group will react similarly regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group can be enhanced by making modifications in the functional group .Atoms present in functional groups are linked to each other by means of covalent bonds.They are named along with organic compounds according to IUPAC nomenclature.
Functional group inter conversion is also possible by retro -synthesis.In some cases , functional groups can be charged molecules.
Learn more about functional groups,here:
https://brainly.com/question/14618322
#SPJ2
Calculate the energy and frequency of red light having a wavelength of 650 nm (Note => 650 nm = 6.50 * 10^7 m)
The energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively if the red light has a wavelength of 650
nm.
What is Wavelength?It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.
C = λν
As given in the problem we have to calculate the energy of the light if the wavelength of light is 6.5 × 10⁻⁷ meters.
The frequency of the red light = 3 × 10⁸ / 6.5 × 10⁻⁷
= 4.615 × 10¹⁴ Hz
The energy of the red light = h ν
= 6.26 × 10⁻³⁴ × 4.615 × 10¹⁴
= 2.88 × 10⁻¹⁹ Joules
Thus, the energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively.
To learn more about wavelength, refer to the link given below ;
brainly.com/question/7143261
#SPJ1
QUESTION 2How many grams of NaOH are present in 27.0 mL of a 2 M solution?
We want the mass of NaOH, Given:
V = 27.0 mL = 0.0270 L
C = 2 M
Given the concentration and volume we can find the number of moles of NaOH, and then convert it to mass.
C = n/V (or Molarity = moles of solute/litres of the solution) where C is the concentration or molarity, n is the number of moles of the solute and V is the volume of the solution
n = Cv
n = 2 x 0.0270 L
n = 0.054 mol
Now that we have the number of moles, we can get the mass of NaOH. Molar mass of NaOH = 39,997 g/mol
n = m/M where m is the mass and M is the molar mass
m = nM
m = 0.054 mol x 39,997 g/mol
m = 2.16 g
A testable question is, “How does the amount of exercise affect heart rate and breathing rate?” Which is a controlled variable?O Amount of exerciseO Heart rateO Breathing rateO Temperature in the room
Answer
Temperature of the room
Explanation
The room temperature can be controlled compared to all other options.
what are terms used for solubility or concentration expression ?
Answer:
The correct expression used for solubility is a. grams per 100 grams of solvent. One of the most commonly used methods for expressing the concentrations is molarity.
9. Which statement provides evidence that supports the Big Bang Theory?* 2 points
O the universe began as a very high density singularity
Small spiral galaxies become larger elliptical galaxies
Dark matter makes up the majority of matter in the galaxy.
The chemical makeup of the universe has changed dramatically
The statement the chemical makeup of the universe has changed dramatically provides evidence that supports the Big Bang Theory (Option D).
What is the Big Bang Theory?The Big Bang Theory is a widely accepted theory in physics that states all the universe began with a huge explosion and form then matters expanded in space at the same time that it is cooling.
Therefore, with this data, we can see that the Big Bang Theory states that the chemical composition of the universe associated with hydrogen and helium modified since this explosion.
Learn more about the Big Bang Theory here:
https://brainly.com/question/1973038
#SPJ1
Answer:
d
Explanation:
During her presentation, Zahara was asked several questions from the audience and to provide the molecular formula for molecules that the audience had questions about. Help Zahara show the molecular formula for the following compounds: Trisilicon tetranitride
Because tri means 3, there are 3 silicon atoms, and tetra means 4, so there will be 4 nitrogen atoms, the answer is:
[tex]_{N_4Si_{3_{}}}[/tex]Where are the alkali metals and the alkaline earth metals located? How do the characteristic properties of each group compare/contrast to the other?
Alkali Metals are located in the first group in the periodic table. (Hydrogen is not alkali, be careful with that).
Alkaline Earth Metals are in group number two, right next to the Alkali Metals.
You have to look at the vertical groups ( 1 and 2).
----------------------------------------------------------------------------------------------------------------
ALKALI METALS (AL) VS ALKALINE EARTH METALS (ALE).
Alkali Metals are soft, Alkaline Earth Metals are hard.
AL have only one electron in the last shell, ALE have 2.
AL present a low melting point, ALE high.
AL form hydroxides strongly basic, ALE hydroxides are less basic.
AL are more reactive than ALE
AL have +1 ionic charge in their compounds, ALE have +2 ionic charge in their compounds.
I need your help with this question
No need explaining just say the answer thanks
Answer: CHOCH
The third one
Explanation:
The following lists consists of ionic compounds EXCEPT
barium hydroxide, zinc carbonate, ammonium sulfate
calcium chloride, carbon disulfide, magnesium nitrate
sodium sulfate, copper(II) oxide, potassium nitride
aluminium sulfide, sodium sulfite, calcium fluoride
Except for NACLE, the is made up of ionic compounds. Carbon disulfide bonds are not ionic due to their weak and trivial polarity. Carbon disulfide bonds are covalent due to the small difference in electronegativities of carbon and sulfur.
What makes an ionic bond?Ionic bond, also known as electrovalent bond, is a type of linkage formed in a chemical compound by the electrostatic attraction of oppositely charged ions. When the valence (outermost) electrons of one atom are permanently transferred to another, a bond is formed.After two or more atoms lose or gain electrons to form an ion, an ionic bond can form. Ionic bonds form when metals lose electrons and nonmetals gain electrons. Ions with opposite charges attract each other, forming an ionic bond.To learn more about Ionic Bond, refer to:
https://brainly.com/question/977324
#SPJ13
you find the density of an object 4 times 1.3g/ml 1.25g/ml 1.17g/ml and 1.22g/ml now determine the percent deviation from the mean
Firstly we will determine the average or the mean of the objects density:
[tex]\begin{gathered} Mean=\frac{1.3g•mL^{-1}+1.25g•mL^{-1}+1.17g•mL^{-1}+1.22g•mL^{-1}}{4} \\ Mean=\frac{4.94g•mL^{-1}}{4} \\ Mean=1.235 \end{gathered}[/tex]Now we will calculate the deviation. The deviation is how much is trial is different from the average. We take the absolute value so the answers can be positive:
[tex]\begin{gathered} Trial\text{ }1:|1.3-1.235|=0.065 \\ Trial\text{ }2:|1.25-1.235|=0.015 \\ Trial\text{ }3:|1.17-1.235|=0.065 \\ Trial\text{ }4:|1.22-1.235|=0.015 \end{gathered}[/tex]We will determine the average of the deviation:
[tex]\begin{gathered} Deviation\text{ }mean=\frac{0.065+0.015+0.065+0.015}{4} \\ Deviation\text{ }mean=0.04 \end{gathered}[/tex]To determine the percent deviation we:
[tex]\begin{gathered} \%\text{ }deviation=\frac{mean\text{ }deviation}{mean}\times100 \\ \\ \%\text{ }deviation=\frac{0.04}{1.235}\times100 \\ \\ \%\text{ }deviation=3.24\% \end{gathered}[/tex]Answer: The percent deviation from the mean is 3.24%,
What is known about the first forensic laboratory?
A.
It was opened by the Los Angeles Police Department.
B.
It was started by the Federal Bureau of Investigation.
C.
It opened in the late 1800s.
D.
It was built by a Chinese emperor in the 1200s.
Answer:
It was started by the FBI
What type of bond is formed between hydrogen and oxygen atoms within a water molecule?Ionic bondNonpolar covalent bondPolar covalent bondHydrogen bondWhich of the following best describes a solute that is dissolved in water?Aqueous solutionGaseous solutionAlloyHeterogeneous solution
To determine what type of bond is formed when hydrogen and oxygen form water, we have to find the difference in electronegativities of hydrogen and oxygen:
[tex]3.44-2.2=1.24[/tex]According to this, the difference between electronegativities is less than 1.7 and greater than 0.4, which means that the type of bond formed by oxygen and hydrogen is polar covalent bond.
What is the mass in grams of 8 moles of ammonia, NH3?
The first step to find the mass of the 8 moles of NH₃ is to find the molar mass of NH₃. The molar mass of any compound is the mass of one mol of it. To calculate it, we have to look for the atomic masses of the elements that the molecule has.
N: 14.01 amu
H: 1.01 amu
Then the molar mass of NH₃ will be:
molar mass of NH₃ = 14.01 + 3 * 1.01
molar mass of NH₃ = 17.04 g/mol
Now that we know the molar mass of NH₃ (the mass of one mol of it) we can easily find the mass of 8 moles.
mass = 8 moles of NH₃ * 17.04 g/mol = 136.32 g
mass = 136.32 g
Answer: the mass in grams of 8 moles of ammonia is 136.32 g
How many atoms are in this compound: Li₂SO₂?
To count atoms, we can find the total sum of the subscripts in a chemical compound.
This is the case for most compounds. In some cases, we will have to multiply subscripts when there are elements inside brackets.
Solving the QuestionWe're given:
Li₂SO₂
In front of lithium (Li), there is a 2.
In front of sulfur (S), there is nothing, which means 1.
In front of oxygen (O), there is a 2.
Add:
2 + 1 + 2 = 5
Therefore, there are 5 atoms in Li₂SO₂.
Answer5 atoms
10) Identify the substance as an acid or a base and put an "X" in the box.
l
Identify the substance as an acid or a base and put an "X" in the box lemon juice is the acid sodium hydroxide is the base and ammonia is the weak base and HCl is the strong acid
An acid is the any hydrogen containing substances that is capable of donating a proton to another substances and base is the molecule or ion able to accept a hydrogen ion from acid and acidic substances are usually identified by their sour taste and here given example are lemon juice acidic because they contain high amount of citric acid and sodium hydroxide is the base because they dissociate completely into the solution to form hydroxide ion and ammonia is the weak base because nitrogen atom has electron pair that easily accept a proton and HCl is the strong acid because it dissociate almost completely
Know more about substance
https://brainly.com/question/25280500
#SPJ1
The volume of ammonia gas at .930 atm of pressure is gradually decreased from 96.2mL to 44.7mL. What is the final pressure of ammonia if there is no change in temperature?
Initial Pressure = P₁ = 0.930 atm
Final Pressure = P₂ = ?
Initial Volume = V₁= 96.2 mL
Final Volume = V₂ = 44.7 mL
Temperature = constant
If we consider that ammonia as an Ideal Gas, and since the temperature is constant we can apply Boyle's Law. It says that at constant temperature:
P₁ * V₁ = P₂ * V₂
If we divide at both sides by V₂:
P₁* V₁ / V₂ = P₂ * V₂ / V₂
On the right side we can cancel V₂ and we get:
P₁* V₁ / V₂ = P₂
P₂ = P₁* V₁ / V₂
Replacing by the values that we were given:
P2 = 0.930 atm * 96.2 mL / (44.7 mL)
P2 = 2.00 atm
So the final pressure is 2.00 atm
The molar mass of oxygen gas (O2) is 32.00 g/mol. The molar mass of C3H8 is 44.1 g/mol. What mass of O2, in grams, is required to completely react with 0.025 g C3H8?"Determine the mass of each of the following compounds, rounding molar masses of elements to the gram before adding up the total: C3H8 (propane)"
The molar mass of oxygen gas (O2) is 32.00 g/mol.
The molar mass of C3H8 is 44.1 g/mol.
This kind of reaction is a combustion:
C3H8 + 5O2 → 3CO2 + 4H2O (In a combustion we obtain CO2 and H2O. Don't forget to balance this equation)
Procedure:
Let's use stoichiometry to solve this
44.1 g C3H8 --------- 5 x 32.00 g O2
0.025 g C3H8 --------- X
X = 0.091 g O2
Answer: mass of O2 required = 0.091 g
Complete the balanced dissociation equation for the compound below. If
the compound does not dissociate, write NR after the reaction arrow.
LiOH(s) →
LiOH ⇌ Li + + OH - NR
When there are too many OH ions, water dissociates fully to the left, possibly leaving only Li + and OH ions and H 2 O molecules.
IN CHEMISTRY, WHAT IS AN ION?An atom or collection of atoms that is classified as an ion as a different number of electrons than proton atoms. The particle is a positive ion, also known as a cation, if the number of electrons is smaller than the number of protons.
How do ions form?Ions are created when there are more protons in an atom than electrons, which is the case in all atoms. An atom that has gained or lost one or more electrons, and as a result has a negative or positive charge, is what is referred to as an ion. Exchanging electrons between atoms or molecules is the process of ionization.
TO know about ions visit:
https://brainly.com/question/13692734
#SPJ13
What's the difference between ionization and dissociation?
Question options:
A)
Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
B)
Ionization involves complete breakdown, while dissociation is only partial.
C)
Ionization breaks covalent bonds, and dissociation breaks ionic bonds.
The difference between ionization and dissociation : Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
Ionization breaks the ionic bond into its constituent ions while dissociation is breaking of bond into its simple constituent. Ionization is a irreversible process and dissociation is reversible process. The bond involves in the process of ionization is ionic bond and the bond involved in the process of dissociation is the covalent bond. The compound related to ionization is ionic compound and the compounds related with dissociation is covalent compound.
Thus, The difference between ionization and dissociation :
(A) Ionization breaks ionic bonds, and dissociation breaks covalent bonds.
To learn more about ionization and dissociation here
https://brainly.com/question/11705378
#SPJ1
How many grams of fluorine gas occupy 543.2ml and exert 123456 pa of pressure at 29.8 degrees Celsius
Answer:
m = 506 grams of fluorine
Explanation:
Given:
M = 19·10⁻³ kg / mol - molar mass of fluorine
V = 543.2 mL = 543.2·10⁻³ m³
p = 123456 Pa
t = 29.8°C
_____________________
m - ?
Temperature in degrees Kelvin:
T = 273.15 + t = 273.15 + 29.8 = 302.95 K
Clapeyron-Mendeleev law:
p·V = (m/M)·R·T
Mass of fluorine:
m = p·V·M / (R·T)
m = 123456·543.2·10⁻³·19·10⁻³ / (8,31·302.95) ≈ 0.506 kg
or m = 506 g
What is the number of molecules in
500m cube of Oxygen at room temperature
4.95 is the number of molecules in 500m cube of Oxygen at room temperature and pressure
we have got data
pressure=1atm
temperature=298 k
volume=500 m^3
gas constant, R=8.31
now, by applying ideal gas equation
PV=nRT
1×500=n×8.31×298
n=2476.38/500
n=4.95
It is the lowest part of the material and has chemical elemental properties. Atoms do not independently exist; rather, they combine to form ions and molecules, which then combine to form the material that we can see, feel, and touch.
Molecules are made up of one or more atoms connected by covalent (chemical) connections. Atoms can be visualized as circles with a nucleus in the center (made up of protons and neutrons) and one or more concentric circles around it that indicate the "shells" or "levels" in which the electrons surrounding the atom's nucleus are located, as well as markings that identify the electron. each level
To know more about molecules visit : https://brainly.com/question/11405437
#SPJ9
What is the energy of a purple
lamp with a frequency of
7.5 x 10^14 Hz
Answer:
[tex] \huge{4.969 \times {10}^{ - 19} \:J }[/tex]
Explanation:
The energy of the purple lamp can be found by using the formula
E = hf
where
E is the energy
f is the frequency
h is the Planck's constant which is
6.626 × 10-³⁴ Js
From the question.
[tex] f = 7.5 \times 10^14 \: Hz [/tex]
We have.
[tex] E = 6.626 \times 10^{-34} \times 7.5 \times 10^{14} [/tex]
We have the final answer as
[tex]4.969 \times {10}^{ - 19} \: J[/tex]