8. What's the volume of 108g of a material if the material has a density of 0.90 g/mL?

A. 108.9 mL
B. 97.2 mL
C. 120 mL
D. 107.1 mL

Answer:

56.88g N2

Explanation:

1 mole of N2 will react to 3 moles of H2

so 6.25 moles of H2 will react to 6.25/3 = 2.03 moles of N2

molar mass of N2 = 2(14.01) = 28.02 g/mol

mass of N2 = 2.03 x 28.02 = 56.88 g

The mass of 15 moles of Fe2O3 can be calculated by multiplying the molar mass of Fe2O3 (159.69 g/mol) by 15 moles. The total mass in grams is 2395.35 g.

The molar mass of a substance is the mass of one mole of that substance, which is equal to the sum of the atomic masses of all the atoms in the molecule. In the case of Fe2O3, the molar mass is equal to the sum of the atomic masses of iron (55.845 g/mol) and oxygen (15.999 g/mol) multiplied by two oxygen atoms and three iron atoms, which is 159.69 g/mol.

To calculate the mass in grams of 15 moles of Fe2O3, we simply multiply 159.69 g/mol by 15 moles, which yields a total mass of 2395.35 g.

Learn more about molar mass  here:

https://brainly.com/question/837939

#SPJ1

1.083 moles of Al are needed to react completely with 52.00 g O2.

To begin, we can use the molar mass of O2 to convert 52.00 g to moles.

52.00 g O2 / (32.00 g/mol) = 1.625 mol O2

The balanced equation shows that two moles of aluminum react with three moles of oxygen to form two moles of aluminum oxide. Therefore, we need to know how many moles of aluminum are required to react with 1.625 mol of oxygen.

Using the stoichiometric ratio from the balanced equation:

2 mol Al : 3 mol O2

We can set up a proportion to determine the number of moles of Al needed:

2 mol Al / 3 mol O2 = x mol Al / 1.625 mol O2

Solving for x:

x = (2 mol Al / 3 mol O2) x (1.625 mol O2) = 1.083 mol Al

Therefore, 1.083 moles of aluminum must react completely with 52.00 g of O2.

Learn more about finding moles from the unbalanced equations:

https://brainly.com/question/21427841

A. The mole fraction of sodium chloride (NaCI) is 0.042

B. The mole fraction of water (H₂O) is 0.958

We'll begin by obtaining the mole of each component in the solution. This is shown below:

For sodium chloride (NaCI)

Mole = mass / molar mass

Mole of NaCI = 3.57 / 58.5

Mole of NaCI = 0.061 mole

For water (H₂O)

Mole = mass / molar mass

Mole of H₂O = 25 / 18

Mole of H₂O = 1.389 mole

Finally, we shall determine the mole fraction of each component. Details below:

For sodium chloride (NaCI)

Mole fraction of NaCI = Mole of NaCI / total mole

Mole fraction of NaCI = 0.061 / 1.45

Mole fraction of NaCI = 0.042

For water (H₂O)

Mole fraction of H₂O = 1 - Mole fraction of NaCI

Mole fraction of H₂O = 1 - 0.042

Mole fraction of H₂O = 0.958

Learn more about mole fraction:

https://brainly.com/question/15735596

#SPJ1

Answer:

In this experiment, the amount of ice is the independent variable, and the temperature change is the dependent variable.

"If a new element with an atomic number of 119 were to be discovered, it would be located in the seventh row of the periodic table, in the period or row that contains elements with atomic numbers 113 to 118.

According to the trends on the periodic table, the seventh row of the periodic table should have 7 energy levels or shells. This is because the number of shells in an atom is equal to the period or row number of the element in the periodic table.

For the valence electrons, we need to look at the group or column that the element would belong to. Since it is a new element, it is not yet known what its chemical properties are or what group it would belong to. However, based on the trends in the periodic table, elements in the same group have the same number of valence electrons.

If we assume that this new element belongs to group 1, which is the alkali metal group, then it would have 1 valence electron, like all the other elements in that group. If it belongs to group 18, which is the noble gas group, then it would have 8 valence electrons, with the exception of helium which has only 2 valence electrons.

It is important to note that the properties of this hypothetical new element are not yet known and the number of energy levels and valence electrons may differ from what is predicted based on periodic trends." (ChatGPT, 2023)

Answer: 72g

Explanation:

the answer is in the image above

The amount of water is needed to dilute the stock solution to 0.25 M with a total volume of 547 mL is 548 mL

To solve this problem, we can use the formula:

M1V1 = M2V2

where M1 and V1 are the initial concentration and volume, and M2 and V2 are the final concentration and volume.

Given:

M1 = initial concentration = ?

V1 = initial volume = 250 mL

M2 = final concentration = 0.25 M

V2 = final volume = 547 mL

Mass of KCl used = 10.2 g

First, we need to calculate the initial concentration:

M1 = (moles of solute) / (volume of solution in liters)

The molar mass of KCl is 74.55 g/mol. Therefore, the number of moles of KCl used is:

moles of KCl = (mass of KCl) / (molar mass of KCl)

moles of KCl = 10.2 g / 74.55 g/mol

moles of KCl = 0.137 mol

The volume of the initial solution in liters is:

V1 = 250 mL = 0.25 L

Using the formula above, we can calculate the initial concentration:

M1 = (moles of KCl) / (volume of solution in liters)

M1 = 0.137 mol / 0.25 L

M1 = 0.548 M

Now, we can use the formula to calculate the volume of water needed to dilute the solution:

M1V1 = M2V2

(0.548 M)(250 mL) = (0.25 M)(547 mL + V_water)

137 mL = 0.25 M V_water

V_water = 548 mL

Therefore, 548 mL of water is needed to dilute the stock solution to a final volume of 547 mL with a concentration of 0.25 M using M1V1 = M2V2.

Learn more about amount of water below.

https://brainly.com/question/28931214

#SPJ1

The molecular formula of the compound with a molecular ion at M+ = 122.0374 could be C7H10O3N.

A molecular formula is the chemical representation of a molecular compound that lists the types and quantities of atoms that make up each molecule.

The chemical formula for a molecular compound molecular formula lists the variety of atoms that make up the molecule. A subscript under oxygen in CO2, for instance, indicates that there are two oxygen atoms present, but a subscript under carbon indicates that there is just one carbon atom present.

By dividing the mass by the formula mass expressed in g/mol, one can determine the number of moles in a given quantity of substance.

To know more about the molecular formula visit:

https://brainly.com/question/8201330

#SPJ1

If 17 mol of sodium (Na) react in this reaction, 8.5 mol should be the end product i.e., sodium oxide (Na2O) according to the stoichiometry.

Stoichiometry is a technique used by scientists to quantify and control the quantity of reactants and products in chemical reactions on a big scale. Without it, reactions might not be complete, wasting costly ingredients and producing dangerous byproducts.

With so many applications in everyday life, stoichiometry is regarded as the core of chemistry. Stoichiometric calculations are used to determine the chemical makeup of every chemical product we use on a regular basis, including shampoos, cleansers, fragrances, soaps, and fertilizers. Stoichiometry is necessary for the chemical industry to function.

To know more about stoichiometry visit-

https://brainly.com/question/30215297

#SPJ1

According to the given statement, A flow rate of 3.15 x 10^-5 kL.hr⁻¹ is equivalent to 8.75 µL.s⁻¹. To convert kL.hr⁻¹ to µL.s⁻¹, we can use the steps: (Given below)

liquids flow is the amount of liquids that moves in a given amount of time. When measuring the flow of water supplies, different units are frequently used, including cubic feet per second (cfs), cubic meters per second (cms), gallons per minute (gpm), and others.

⇒ Convert kiloliters (kL) to liters (L) by multiplying by 1000.

⇒ Convert hours (hr) to seconds (s) by multiplying by 3600.

⇒ Convert liters per hour (L.hr⁻¹) to microliters per second (µL.s⁻¹) by dividing by 3.6.

Using these steps, we get:

3.15 x 10^-5 kL.hr⁻¹ = 3.15 x 10^-5 x 1000 L.hr⁻¹ = 0.0315 L.hr⁻¹

0.0315 L.hr⁻¹ = 0.0315 / 3600 L.s⁻¹ = 8.75 x 10^-6 L.s⁻¹

8.75 x 10^-6 L.s⁻¹ = 8.75 x 10^-6 x 10^6 µL.s⁻¹ = 8.75 µL.s⁻¹

Therefore, a flow rate of 3.15 x 10^-5 kL.hr⁻¹ is equivalent to 8.75 µL.s⁻¹.

To know more about flow rate visit :

https://brainly.com/question/1154328

#SPJ1

Answer:

When the temperature of water in a geothermal power plant increases, the energy of the water molecules increases. Therefore, the correct answer is b. The energy of the water molecules increases.

Explanation:

Systematic name : 5-chloro-2-pentanol (or 5-chloropentan-2-ol)

Systematic name : 1,2-difluoro-3-heptanol   (or 1,2-difluoroheptan-3-ol).

The active site of numerous reactions is the hydroxyl group (OH). Pentyl butyrate, which has an apricot-like aroma, is the ester that results from the reaction of 1-pentanol and butyric acid. Amyl acetate, also known as pentyl acetate, is the ester that is created when 1-pentanol and acetic acid are combined.

A research evaluating the efficacy of diesel fuel blends with different amounts of pentanol as an additive was done in 2014. Higher pentanol concentrations resulted in higher gaseous emissions at the expense of lower particulate emissions.

Learn more about pentanol

https://brainly.com/question/30218582

#SPJ1

Answer:

Explanation:

This requires using the mol/mol ratio of the balanced equation to solve.  

Start with the given number of moles, cancel those and then multiply by the moles of CO2.  

4 mol C2H6 x 4 mol CO2 = 8 moles of CO2 produced

                       2 mol C2H6

According to the question Therefore, 81.00 mg/L CaCO3 is equivalent to 162.00 mg/L H2PO4-.

Calcium Carbonate, also known as CaCO3, is a naturally occurring mineral which is found in rocks, shells, and pearls. It is composed of the elements calcium, carbon, and oxygen, and is a major component of sedimentary rocks. Calcium Carbonate is an important building material, and is used in a range of industries, from paper and plastic to pharmaceuticals and cement. It is also used as an additive in many food products, such as baking powder and cheese.

To calculate this, we must first convert 81.00 mg/L CaCO3 to moles.

81.00 mg/L CaCO3 = 0.00045 moles CaCO3

Next, we need to convert from moles of CaCO3 to moles of H2PO4-. The molar ratio between CaCO3 and H2PO4- is 1:2, so for every mole of CaCO3, there are two moles of H2PO4-.

Therefore, 0.00045 moles CaCO3 = 0.00090 moles H2PO4-

Finally, we must convert the moles of H2PO4- back to mg/L:

0.00090 moles H2PO4- = 162.00 mg/L H2PO4-

To learn more about CaCO3

https://brainly.com/question/29671908

#SPJ9

Answer:

How much heat will be released when. 8.21 g of sulfur reacts with excess O1 according to the following equation? 25 +302 → 2SO3. AH° = -791.4 kJ.

Explanation:

I HOPE THIS HELPED IF NOT THEN LET ME KNOW

76.0 kJ, According to the provided reaction and stoichiometry, 76.0 kJ of heat will be emitted when 8.21 g of sulphur interacts with too much oxygen to create sulphur dioxide.

We must first determine how many moles of sulphur are present:

S mass divided by S's molar mass equals moles of S.

8.21 g/32.06 g/mol = 0.256 mol are the moles of sulphur.

We may infer that all of the sulphur will react because there is an excess of oxygen, hence the reaction will result in:

1 mol SO2 divided by 0.256 mol S results in 0.256 mol SO2.

q = nΔH

where n is the number of moles of the product (SO2), q is the quantity of heat released, and H is the reaction's enthalpy change.

q = (0.128 mol)(-296.8 kJ/mol) = -76.0 kJ

Answer:

A. Excess reactant is FePO4

B. mass of Ca3(PO4)2 produced is 12.41g

Explanation:

A. FePO4 has molar mass of 150.82 g/mol => 26/150.82 = 0.17 mole

CaCO3 has molar mass of 100.09 g/mol => 12.1/100.09 = 0.12 mole

3CaCO3 + 2FePO4 => Ca3(PO4)2 + Fe2(CO3)3

2 moles of FePO4 will react with 3 moles of CaCO3

Therefore,

0.17 mole of FePO4 will react with 0.17 x (3/2) = 0.255 mole of CaCO3

and

0.12 mole of CaCO3 will react with 0.12 (2/3) = 0.08 mole of FePO4

Therefore the excess reactant will be FePO4

B. 3 moles of CaCO3 will produce 1 mole of Ca3(PO4)2

so 0.12 mole of CaCO3 will produce 0.12 x (1/3) = 0.04 mole

Ca3(PO4)2 has molar mass of 310.18 g/mol

=> mass of Ca3(PO4)2 produced is 0.04 x 310.18 = 12.41g

Answer:

Fog collection is the harvesting of water from fog using large pieces of vertical mesh netting to induce the fog-droplets to flow down towards a trough below. A material that can collect water from fog should be able to induce condensation of atmospheric water vapor from the air into droplets of liquid water. Some designs use parallel wires while others use tiny structures inspired by cactus spines.

When designing a material for collecting water from fog, some important criteria and constraints might include its ability to collect moisture efficiently under different conditions (such as cool fog or sunny conditions), its durability and cost-effectiveness. Additionally, bioinspired designs have been shown to be effective for collecting water from fog.

Answer:

The gas that is at room temperature reacts violently with other elements without heating is ammonium chloride ammonia, mercury or sodium. Basically, the electronegative element will be adopting -1 oxidation state.

Explanation:

if it helped you please mark me a brainliest :))

Hamilton explained the choice on the On Purpose show, admitting that the pair's work connection from karting to F1 had placed a burden on an otherwise strong friendship.

Lewis Hamilton now has a close connection with his father Anthony, but this was not always the case during his Formula One tenure. Anthony had a significant influence on his son's career, notably working multiple jobs to finance Hamilton's early foray into racing until he was signed by McLaren at the age of 11.

However, his earnings outside of Formula One rose from $8 million in 2021 to $12 million in 2022. Hamilton was the highest-paid Formula One racer. He has profitable agreements with companies such as Monster energy drinks.

Learn more about Hamilton

https://brainly.com/question/31006348

#SPJ1

Carbon dioxide is converted to sugar  in the Photosynthesis process. Carbon trappeds is converted to carbon dioxide in the Combustion proces.Organic carbon is converted to fossil fuels.

Organic refers to products and processes that are grown and made without the use of synthetic chemicals, fertilizers, or genetically modified organisms. These products are grown in a way that preserves the environment, using natural fertilizers and methods that promote soil health and biodiversity. Organic food is healthier for us and for the planet, as it is free of chemicals, pesticides, and other pollutants. Organic farming often uses sustainable practices, such as crop rotation, cover crops, and integrated pest management, that reduce environmental impact.

To learn more about Organic

https://brainly.com/question/26854014

#SPJ1

The metal has a specific heat of about 0.39 J/(g°C).

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change and is the linear expansion coefficient, which changes somewhat with temperature, can be used to determine how much heat a sample gains or loses.

q = m * c * ΔT

Where q is the amount of heat that is transmitted, m is the metal's mass, c is its specific heat, and T is the temperature change. Knowing that the heat transferred to metal and water is equal and in the opposing directions, we can:

q metal = -q water

We are also aware of the masses and variations in temperature of the metal and water:

m water = 100.0 g

ΔT water = 23.8 °C - 17.4 °C = 6.4 °C

m metal = 33.6 g

ΔT metal = 23.8 °C - 95.8 °C = -72.0 °C (negative because the metal is losing heat)

Using these values as substitutes and solving for c metal, we arrive at:

q metal = -q water

c metal = -100.0 g * 4.18 J/(g·°C) * 6.4 °C / (33.6 g * (-72.0 °C))

c metal ≈ 0.39 J/(g·°C)

To know more about specific heat visit:-

https://brainly.com/question/11297584

#SPJ1

Question:

Suppose you heat a metal object with a mass of 33.6 g to 95.8 °C and transfer it to a calorimeter containing 100.0 g of water at

17.4 °C. The water and metal reach a final temperature of 23.8 °C.

What is the specific heat of the metal?

The statement is false that the chemical compound ethanol, with a molecular mass of 46.07 g/mol, has the same molecular formula as Ethanol. The organic liquid, on the other hand, has molecules that weigh 32 g/mol.

Ethylene glycol is a substance that is frequently used as antifreeze. 38.7% of it is carbon, 9.75% hydrogen, and the remainder is oxygen. Ethylene glycol has a molecular weight of 62.07 g.

In the molecules of carbohydrates, the proportion of carbon to hydrogen to oxygen is 1:2:1. This class of organic compounds gets its name from the parts water (water, -hydrate) and carbon (carbon, carbo-).

To know more about organic compounds visit:-

https://brainly.com/question/5994723

#SPJ9

The reactant that is consumed first in a chemical reaction, also known as the limiting reactant (or limiting reagent), limits the amount of product that can be produced. As a result ,O2 is the limiting reactant.

What is limiting reactant ?

When a reactant is totally consumed during a chemical reaction, the amount of product that can be created is constrained.

n(Mg) = 2.8 g / 24.31 g/mol, n(Mg) = 0.1153 mol, and n(Mg) = m/M

Then, let's determine how many moles of oxygen there are:

n(O2) = 4.5 L * 1 atm / (0.08206/mol * 273.15 K) n(O2) = V(STP) * P(STP) / R * T(STP)

n(O2) = 0.1788 mol

The balanced equation states that the stoichiometric ratio of magnesium to oxygen is 2:1. As a result, 1 mole of O2 and 2 moles of Mg react.

To react with all of the O2, Mg must be present in the following amounts: n(Mg) = n(O2) / 2 n(Mg) = 0.1788 mol / 2 n(Mg) = 0.0894 mol

Since we have only 0.1153 mol of Mg, which is greater than the required 0.0894 mol, Mg is not the limiting reactant. O2 is the limiting reactant since we have only 0.1788 mol of it, which is less than the required 0.1788 mol.

To know more about reactant visit:-

https://brainly.com/question/13005466

#SPJ1

The equation shows that for every two atoms of sodium (Na) in the reactants. Therefore,Na atom is the same, while N atom is two and N atom in the products is three.

Atom is a free and open-source text and source code editor created by GitHub. It is available for macOS, Linux, and Microsoft Windows. It is a desktop app built using web technologies such as JavaScript, HTML, and CSS. Atom provides features such as syntax highlighting, autocompletion, project management, a built-in package manager, and embedded Git control. It also offers integration with a variety of other tools and services, such as GitHub.

To learn more about atom

https://brainly.com/question/26952570

#SPJ1

Answer:

Explanation:

The amount of heat (q) required to raise the temperature of a substance is given by:

q = mcΔT

where m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

To find the mass of carbon present, we need to rearrange the formula as follows:

m = q / (cΔT)

We are given the following information:

q = 57.5 kJ (the amount of heat required)

ΔT = 25.0°C - 20.0°C = 5.0°C (the change in temperature)

The specific heat capacity of carbon is approximately 0.71 J/g°C.

We need to convert the amount of heat from kJ to J:

q = 57.5 kJ * 1000 J/kJ = 57500 J

Now we can substitute the values into the formula and solve for m:

m = q / (cΔT) = 57500 J / (0.71 J/g°C * 5.0°C) ≈ 1620 g

Therefore, approximately 1620 grams of carbon are present.

The balanced chemical equation for the complete combustion of propan-2-ol (also known as isopropanol) is: C₃H₈O + 5O₂ → 3CO₂ + 4H₂O.

Complete combustion is a chemical reaction between a fuel and an oxidant that produces only carbon dioxide and water vapor as the products. In other words, in complete combustion, all of the fuel is burned completely, producing the maximum amount of heat and light energy. The general equation for complete combustion of a hydrocarbon fuel is: hydrocarbon + oxygen → carbon dioxide + water. In this reaction, methane reacts with oxygen to produce carbon dioxide and water vapor. This reaction is exothermic, meaning it releases heat energy, and it is used in many applications such as heating and energy production. Complete combustion is different from incomplete combustion, where the fuel is not burned completely and other products such as carbon monoxide (CO) and unburned hydrocarbons are produced. Incomplete combustion is generally less efficient and can produce harmful pollutants.

Here,

This equation shows that one molecule of propan-2-ol reacts with five molecules of oxygen gas to produce three molecules of carbon dioxide and four molecules of water vapor. This reaction releases energy in the form of heat and light and is a common way of producing energy from organic fuels. The balanced equation shows that the number of atoms of each element is the same on both sides of the equation, which is a requirement for a balanced chemical equation.

To know more about complete combustion,

https://brainly.com/question/14177748

#SPJ9

Answer:

To determine the lattice energy of CaCl₂, we can use the Born-Haber cycle, which relates the lattice energy to other thermodynamic quantities such as the enthalpy of sublimation, dissociation, and formation.

The Born-Haber cycle for CaCl₂ is as follows:

Ca(s) → Ca(g) ΔHsub

1/2 Cl₂(g) → Cl(g) ΔHdiss

Ca(g) + Cl(g) → CaCl(g) ΔHf

CaCl(g) → CaCl₂(s) ΔHlattice

We can use the following equation to calculate the lattice energy:

ΔHlattice = ΔHsub + ΔHdiss + ΔHf - IE1 - IE2 - EA

where IE1 and IE2 are the first and second ionization energies of Ca, and EA is the electron affinity of Cl.

Substituting the given values, we get:

ΔHlattice = (+178.2) + (+243.4) + (-795.8) - (+590) - (+1145) - (-348.7)

ΔHlattice = -57.1 kJ/mol

Therefore, the lattice energy of CaCl₂ is -57.1 kJ/mol.