The pH of the mixture of acids is 0.62, the pH of the mixture of acids is 0.63, the pH of the mixture of acids is 0.39, the pH of the mixture of acids is 1.00.
To find the pH of a mixture of acids, we need to first calculate the total concentration of H⁺ ions in the solution, and then use that value to calculate the pH using the formula pH = -log[H⁺].
The chemical formulas for the two acids are:
HBr - hydrobromic acid
HCHO₂ - formic acid
The dissociation reactions for these acids are:
HBr → H⁺ + Br⁻
HCHO₂ → H⁺ + CHO₂⁻
The concentrations of the two acids are given as:
[HBr] = 0.115 M
[HCHO₂] = 0.125 M
To find the total concentration of H⁺ ions in the solution, we need to consider the dissociation reactions of both acids. The H⁺ ions from each acid will contribute to the total H⁺ ion concentration:
[H⁺] = [H⁺ from HBr] + [H⁺ from HCHO₂]
[H⁺] = [HBr] + [HCHO₂]
[H⁺] = 0.115 M + 0.125 M
[H⁺] = 0.24 M
Now that we know the total concentration of H⁺ ions in the solution, we can calculate the pH:
pH = -log[H⁺]
pH = -log(0.24)
pH ≈ 0.62
The chemical formulas for the two acids are:
HNO₂ - nitrous acid
HNO₃ - nitric acid
The dissociation reactions for these acids are:
HNO₂ → H⁺ + NO₂⁻
HNO₃ → H⁺ + NO₃⁻
The concentrations of the two acids are given as:
[HNO₂] = 0.150 M
[HNO₃] = 0.085 M
To find the total concentration of H⁺ ions in the solution, we need to consider the dissociation reactions of both acids. The H⁺ ions from each acid will contribute to the total H⁺ ion concentration:
[H⁺] = [H⁺ from HNO₂] + [H⁺ from HNO₃]
[H⁺] = [HNO₂] + [HNO₃]
[H⁺] = 0.150 M + 0.085 M
[H⁺] = 0.235 M
Now that we know the total concentration of H⁺ ions in the solution, we can calculate the pH:
pH = -log[H⁺]
pH = -log(0.235)
pH ≈ 0.63
The chemical formulas for the two acids are:
HCHO₂ - formic acid
HC₂H₃O₂ - acetic acid
The dissociation reactions for these acids are:
HCHO₂ → H⁺ + CHO₂⁻
HC₂H₃O₂ → H⁺ + C₂H₃O₂⁻
The concentrations of the two acids are given as:
[HCHO₂] = 0.185 M
[HC₂H₃O₂] = 0.225 M
To find the total concentration of H⁺ ions in the solution, we need to consider the dissociation reactions of both acids. The H⁺ ions from each acid will contribute to the total H⁺ ion concentration:
[H⁺] = [H⁺ from HCHO₂] + [H⁺ from HC₂H₃O₂]
[H⁺] = [HCHO₂] + [HC₂H₃O₂]
[H⁺] = 0.185 M + 0.225 M
[H⁺] = 0.410 M
Now that we know the total concentration of H⁺ ions in the solution, we can calculate the pH:
pH = -log[H⁺]
pH = -log(0.410)
pH ≈ 0.39
The chemical formulas for the two acids are:
CH₃COOH - acetic acid
HCN - hydrocyanic acid
The dissociation reactions for these acids are:
CH₃COOH → H⁺ + CH₃COO⁻
HCN → H⁺ + CN⁻
The concentrations of the two acids are given as:
[CH₃COOH] = 0.050 M
[HCN] = 0.050 M
To find the total concentration of H⁺ ions in the solution, we need to consider the dissociation reactions of both acids. The H⁺ ions from each acid will contribute to the total H⁺ ion concentration:
[H⁺] = [H⁺ from CH₃COOH] + [H⁺ from HCN]
[H⁺] = [CH₃COOH] + [HCN]
[H⁺] = 0.050 M + 0.050 M
[H⁺] = 0.100 M
Now that we know the total concentration of H⁺ ions in the solution, we can calculate the pH:
pH = -log[H⁺]
pH = -log(0.100)
pH = 1.00
To know more about acids here
https://brainly.com/question/30882149
#SPJ4
You are given 100 ml of a solution of potassium hydroxide with a ph of 12. 0. You are required to change the pH to 11. 0 by adding water. How much water do you add
Explanation:
To calculate the amount of water needed to dilute the solution of potassium hydroxide and change its pH from 12.0 to 11.0, we need to use the formula for calculating the pH of a diluted solution.
The formula is:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in moles per liter.
Since we are diluting the solution by adding water, the concentration of [OH-] (hydroxide ions) will decrease proportionally to the volume of water added. This means that we can use the following equation to calculate the new concentration of [OH-]:
[OH-]1V1 = [OH-]2V2
where V1 is the initial volume of the solution, [OH-]1 is the initial concentration of hydroxide ions, V2 is the final volume of the solution after dilution, and [OH-]2 is the final concentration of hydroxide ions.
We know that the initial pH is 12.0, which means that [OH-]1 = 10^-2.0 M = 0.01 M.
We want to change the pH to 11.0, which means that [OH-]2 = 10^-11.0 M = 1 x 10^-11 M.
We also know that we are adding water to dilute the solution, but we don't know how much water we need to add yet. Let's call this volume of water "Vw".
Using the equation above, we can solve for V2:
[OH-]1V1 = [OH-]2V2
(0.01 M)(100 ml) = (1 x 10^-11 M)(100 ml + Vw)
V2 = (0.01 M)(100 ml)/(1 x 10^-11 M) - Vw
V2 = 10^12 ml - Vw
Now we can use this value for V2 in the pH formula to calculate the new pH:
pH = -log([H+])
[H+] = Kw/[OH-]
Kw is the ion product constant for water, which is equal to 1 x 10^-14 at room temperature.
[H+] = (1 x 10^-14)/(1 x 10^-11)
[H+] = 1 x 10^-3 M
pH = -log(1 x 10^-3)
pH = 3
We want to achieve a pH of 11.0, so we need to add enough water to bring down the pH from 12.0 to 11.0. This means that we need to add enough water so that V2 becomes:
V2 = (0.01 M)(100 ml)/(1 x 10^-11 M) - Vw = 10^11 ml
Therefore, we need to add:
Vw = V2 - initial volume of solution
Vw = (10^11 ml) - (100 ml)
Vw = 99999900 ml or approximately 100 million ml or 100 cubic meters of water.
So, in order to change the pH of a solution of potassium hydroxide with a pH of 12.0 to a pH of 11.0 by adding water only, you would need to add approximately 100 million milliliters or about 100 cubic meters of water.
The image below shows the complete chromatography separation of a mixture on the left, and an incomplete image of the same mixture's separation on the right. The data on the left has a leading edge of solvent of 10.0 cm and the distance traveled by the dye was 8.0 cm. The data on the right shows the leading edge of solvent as 6.0 cm. What distance would you predict the same dye to travel on the chromatography paper on the right? a. 4.8 cm b. 6.0 cm c. 8.0 cm d. Cannot be determined
If a chiral center is formed from Grignard addition, a mixture of enantiomers will be formed. The Grignard reagent can attack at either the top face or bottom face of the carbonyl to give an equal mixture of chiral products. Which carbonyls will give an achiral product after a Grignard reaction with CH, MgBr? ✓ o Incorrect
The carbonyls that will give an achiral product after a Grignard reaction with CH3MgBr are aldehydes and ketones.
Aldehydes and ketones do not have a chiral center. These have two identical groups attached to the carbonyl carbon.
For example, formaldehyde (CH2O) and acetone (CH3COCH3) will give achiral products after a Grignard reaction with CH3MgBr.
In contrast, carbonyls that have two different groups attached to the carbonyl carbon, such as propanal (CH3CH2CHO) and 2-butanone (CH3CH2COCH3), will give a mixture of enantiomers after a Grignard reaction with CH3MgBr.
This is because the Grignard reagent can attack at either the top face or bottom face of the carbonyl to give an equal mixture of chiral products.
In summary, carbonyls that do not have a chiral center will give an achiral product after a Grignard reaction with CH3MgBr, while carbonyls that have a chiral center will give a mixture of enantiomers.
To know more about Grignard reaction, refer here:
https://brainly.com/question/30546045#
#SPJ11
why is steel fibers and battery a chemical reaction please help ASP
Answer:
Batteries and steel fibres may both go through chemical reactions, although they usually do not interact. Batteries normally do not come into direct touch with steel fibres, and steel fibres used in concrete do not experience any chemical changes.
Explanation:
When used together, steel fibres and batteries normally don't have a chemical reaction. Concrete is frequently reinforced with steel fibres to improve its tensile strength and durability. The electrochemical devices known as batteries, on the other hand, transform chemical energy into electrical energy.
Batteries and steel fibres may both go through chemical reactions, although they usually do not interact. Batteries normally do not come into direct touch with steel fibres, and steel fibres used in concrete do not experience any chemical changes.
Under specific circumstances, such as if the battery's electrolyte leaked onto the steel fibres, there may be a chemical reaction between steel fibres and batteries. Nonetheless, this would be
a multi-nutrient fertilizer contains several different nitrogen containing compounds. the fertilizer is 54.2% ch4n2o (urea), 23.2% kno3 , and 12.2% (nh4)2hpo4 by mass. the remainder of the fertilizer consists of substances that do not contain nitrogen. how much fertilizer should someone apply to provide 2.40 g n to a plant?
This yields 2.68 g of fertilizer that must be applied to provide 2.40 g N to the plant.
To calculate the amount of fertilizer needed to provide 2.40 g N to a plant, first determine the percentage of N present in the fertilizer. The fertilizer contains 54.2% CH4N2O (urea), 23.2% KNO3, and 12.2% (NH4)2HPO4. Adding these three percentages together gives you 89.6% of the fertilizer that is nitrogen-containing.
Next, calculate the amount of nitrogen present in 2.40 g. To do this, divide 2.40 g by the total percentage of nitrogen (89.6%) in the fertilizer. This yields 2.68 g of fertilizer that must be applied to provide 2.40 g N to the plant.
Know more about fertilizers
https://brainly.com/question/24544067
#SPJ11
which of the following is a disadvantage of marble? question 1 options: it is difficult to carve. it erodes due to pollution. it requires molds and armatures. it is an additive process.
Among the following options, the disadvantage of marble is that it erodes due to pollution. The correct option is 2.
What is marble?Marble is a kind of rock that is soft and easy to carve when freshly quarried, but hardens as it ages. Marble is a naturally occurring rock that is made up of the mineral calcite. Marble is utilized as a decorative material in architecture and sculpture because of its ability to be polished to a high shine.
Most marbles can be categorized as either calcite or dolomite. The term "marble" is often used in the industry to refer to any polished natural stone, but this is a misnomer. Only true marble, which is a metamorphic rock, can be polished in this manner.
The advantages of marble are as follows:
It is a long-lasting material. It has a distinctive, elegant look to itIt's simple to clean.It has a glossy, smooth finish.It's heat-resistant.The disadvantages of marble are as follows:
It's a fragile material.It's a highly porous substance that can stain quickly.It's expensive.It's difficult to install because it's a heavy substance.It erodes due to pollution.To know more about marble, refer here:
https://brainly.com/question/13368283#
#SPJ11
The equilibrium constant, Kc, for the following reaction is 9.52×10-2 at 350 K:CH4(g) + CCl4(g) 2CH2Cl2(g)Calculate the equilibrium concentrations of reactants and product when 0.374 moles of CH4 and 0.374 moles of CCl4 are introduced into a 1.00 L vessel at 350 K.[CH4] = M[CCl4] = M[CH2Cl2] = M
The equilibrium concentrations are 0.247 M for CH4 and CCl4, and 0.254 M for CH2Cl2.
The equilibrium constant, Kc, is given by the expression:
Kc = [CH2Cl2]² / ([CH4] [CCl4])
We are given the initial concentrations of CH4 and CCl4:
[CH4] = 0.374 M
[CCl4] = 0.374 M
Let x be the change in concentration at equilibrium. The equilibrium concentrations can be expressed as:
[CH4] = 0.374 - x
[CCl4] = 0.374 - x
[CH2Cl2] = 2x
Substituting these values into the expression for Kc, we get:
9.52×10-2 = (2x)² / ((0.374 - x) (0.374 - x))
Solving for x, we get:
x = 0.127 M
Therefore, the equilibrium concentrations are:
[CH4] = 0.374 - 0.127 = 0.247 M
[CCl4] = 0.374 - 0.127 = 0.247 M
[CH2Cl2] = 2(0.127) = 0.254 M
Answer: The equilibrium concentrations are 0.247 M for CH4 and CCl4, and 0.254 M for CH2Cl2.
To know more about equilibrium concentrations, refer here:
https://brainly.com/question/13043707#
#SPJ11
why does the enolate ion of an aromatic ketone react faster with an aldehyde group (producing a crossed-aldol reaction) than with the carbonyl group of another molecule of ketone?
Enolate ion of an aromatic ketone reacts faster with an aldehyde group (producing a crossed-aldol reaction) than with the carbonyl group of another molecule of ketone because of the electronic effect of the substituent.
An enolate ion of an aromatic ketone reacts faster with an aldehyde group to produce a crossed aldol reaction due to electronic effects of the substituent. In case of a ketone, the alpha-proton (C-H bond) is less acidic as compared to that of an aldehyde. The difference in the acidities of alpha-proton atoms is caused by the electron-withdrawing nature of the ketone carbonyl group. This is due to the electronic effects of the substituent.The cross aldol reaction is the reaction between an aldehyde and a ketone to produce a β-hydroxy ketone or aldol. The enolate of a ketone reacts with an aldehyde (it's carbonyl carbon) to form the β-hydroxy ketone or aldol.Crossed aldol reactions occur more frequently and are of greater interest than simple aldol reactions. The main reason for this is the possibility of forming different products by using different aldehydes and ketones.
Know more about electronic effect
https://brainly.com/question/26366780
#SPJ11
Please help me on this. I have no idea how to figure this out.
The season the northern hemisphere is experiencing is A, summer.
When do these seasons occur?Summer: June solstice to September equinox. Summer is the season that follows spring and precedes fall. It typically begins around June 20th or 21st and lasts until around September 22nd or 23rd.
Fall (Autumn): September equinox to December solstice. Fall is the season that follows summer and precedes winter. It typically begins around September 22nd or 23rd and lasts until around December 20th or 21st.
Winter: December solstice to March equinox. Winter is the season that follows fall and precedes spring. It typically begins around December 20th or 21st and lasts until around March 20th or 21st.
Spring: March equinox to June solstice. Spring is the season that follows winter and precedes summer. It typically begins around March 20th or 21st and lasts until around June 20th or 21st.
Find out more on seasons here: https://brainly.com/question/923847
#SPJ1
Image transcribed:
BAND HALL
Earth and Space
What season is the northern hemisphere experiencing?
A Summer
B. Spring
C. Winter
D. Fall
If 78. 2 grams of oxygen (O2) react with plenty of copper Cu, how many moles of
copper (II) oxide (CuO) will be produced?
Answer:
The molar mass of oxygen is 32 g. Hence the number of moles of oxygen are: 78.2 g / (32 g/mole) = 78.2/32 moles Since 1 mole of oxygen produces 2 moles of copper oxide, the number of moles of copper oxide generated are: (78.2/32) x 2 moles = 4.89 moles of copper oxide.
Explanation:
Answer the following questions on a separate sheet of paper. 6. State the hypothesis of continental drift. 7. Why did most scientists reject Wegener ’s theory for nearly a half century? Building Vocabulary Fill in the blank to complete each statement. 8. All the continents were once joined together in a supercontinent called _____________________, meaning “all lands.” 9. A(n) _____________________ is any trace of an ancient organism preserved in rock. 10. Wegener ’s theory that the continents slowly moved over Earth’s surface became known as _____________________.
The continents previously comprised a single landmass when they drifted apart, as according Wegener's Atomic Hypothesis. Pangaea existed, according to Wegener, some 300,000 years ago.
What are the names of supercontinents?The Pangea, Gondwana, or Pannotia supercontinents were the most recent. Geologists believe that there were formerly three supercontinents: Nuna (also known as Columbia), Rodinia, or Ur. A single landmass which encompasses at least 75% of the world's territory is referred to be a supercontinent.
What made it a supercontinent, and why?A landmass thought up almost most or all of the land on Earth is known as a supercontinent. This term could be used to the landmass that is made up of modern-day Africa and Eurasia. Pangea was the most ancient supercontinent to include all of Earth's significant—and possibly most well-known—landmasses.
To know more about Atomic visit:
https://brainly.com/question/30898688
#SPJ1
The light-stimulated conversion of 11-cis-retinal to 11-trans-retinal is central to the vision process in humans. This reaction also occurs (more slowly) in the absence of light. At 80. 0 ∘C in heptane solution, the reaction is first order with a rate constant of 1. 02×10−5/s.
How many hours does it take for the concentration of 11-trans-retinal to reach 3. 14×10−3 M ? (Note: 11-cis-retinal + 11-trans-retinal = total amount of retinal in eye)
It takes approximately 9,510.77 hours for the concentration of 11-trans-retinal to reach [tex]3.14*10^{-3}M[/tex]
The concentration of 11-trans-retinal can be calculated using the following equation:
[tex]ln(At/A0) = kt[/tex]
Where At is the concentration of 11-trans-retinal at time t, A0 is the initial concentration of 11-trans-retinal, and k is the rate constant.
Since we know the rate constant is [tex]1.02*10^{-5} /s[/tex] and the concentration of 11-trans-retinal is [tex]3.14*10^{-3}M[/tex], we can solve for t.
ln([tex]3.14*10^{-3}M/A0[/tex]) = [tex](1.02*10^{-5})t[/tex]
Solving for t, we get:
[tex]t = ln(3.14*10^{-3} /A0)/(1.02*10^{-5} )[/tex]
Therefore, it takes approximately 9,510.77 hours for the concentration of 11-trans-retinal to reach [tex]3.14*10^{-3}M[/tex].
For more question on rate constant click on
https://brainly.com/question/24749252
#SPJ11
a container of xenon gas has a pressure of 740.0 mm hg. if the volume is changed to 0.50 l at constant temperature and the new pressure is 800.0 mm hg, what was the initial volume?
The initial volume is equal to the value of nRT/P when the pressure is 800.0 mm Hg, so the initial volume is 0.50 l.
We can use the ideal gas law to solve this problem: PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature. Since the temperature is constant, we can assume that the value of nRT is also constant.
We can rearrange the equation to find the volume: V = (nRT/P).
First, we can calculate the value of nRT/P for the initial volume, 740.0 mm Hg:
(nRT/740.0) = 0.50.
Now, we can solve for nRT/P when the pressure is 800.0 mm Hg:
(nRT/800.0) = 0.50.
The initial volume is equal to the value of nRT/P when the pressure is 800.0 mm Hg, so the initial volume is 0.50 l.
Know more about volume
https://brainly.com/question/463363
#SPJ11
1. What is the percent by volume of a solution formed by mixing 349 mL of isopropanol with 380mL of water?
2. What is the mass of a solute in a solution with 65% (m/m) of a solute and a mass of the solution is 327. 0g?
3. Calculate the molarity of 171g of KBr dissolved in 829. 0 mL pure water
The percent by volume of a solution formed by mixing 349 mL of isopropanol with 380mL of water. The mass of a solute in a solution with 65% (m/m) of a solute and a mass of the solution is 327g. The molarity of 171g of KBr dissolved in 829. 0 mL pure water
1. The percent by volume of the solution formed by mixing 349 mL of isopropanol and 380 mL of water is 52.2% and 47.8%.
To find the percent by volume of the solution, we need to add the volumes of the two components and then calculate the percentage of each component in the total volume:
Total volume = [tex]349 mL + 380 mL = 729 mL[/tex]
Percent by volume of isopropanol = [tex](349 mL / 729 mL) * 100percent = 47.8 percent[/tex]
% by volume of water = [tex](380 mL / 729 mL) * 100 percent = 52.2percent[/tex]
Therefore, the solution contains 47.8% (v/v) of isopropanol and 52.2% (v/v) of water.
2. The mass of the solute in a solution with 65% (m/m) of a solute and a mass of the solution of 327.0 g is 212.55 g.
We are given the mass percent (m/m) of the solute and the total mass of the solution. Therefore, we can calculate the mass of the solute using the following formula:
Mass of solute = Mass of solution x Mass percent of solute
Mass of solute = [tex]327.0 g * 0.65 = 212.55 g[/tex]
Therefore, the mass of the solute is 212.55 g.
3. The molarity of 171g of KBr dissolved in 829.0 mL of pure water is 1.74 M.
To calculate the molarity of KBr in the solution, we need to first calculate the number of moles of KBr present in the solution using the following formula:
Number of moles = Mass of solute / Molar mass of KBr
The molar mass of KBr is 119 g/mol (39 g/mol for K and 80 g/mol for Br).
Number of moles = 171 g / 119 g/mol = 1.44 mol
The volume of the solution is given in mL, so we need to convert it to liters:
Volume of solution = 829.0 mL = 0.8290 L
Now, we can calculate the molarity using the following formula:
Molarity = Number of moles / Volume of solution
Molarity = 1.44 mol / 0.8290 L = 1.74 M
Therefore, the molarity of the KBr solution is 1.74 M.
For more question on volume click on
https://brainly.com/question/19491767
#SPJ4
if the reaction is 39% complete at the end of 23 s, what is the length of the half-life of this reaction in seconds? use 2 significant figures in your answer. do not include the unit
The length of the half-life is 1.8 seconds (rounded to two significant figures).
The half-life of a reaction is the amount of time it takes for half of the reactants to be consumed. The following is a solution to the problem:
If the reaction is 39% complete at the end of 23 seconds, we can assume that the remaining 61% of reactants will require another half-life to be consumed, which means that half of 61% (or 30.5%) will be consumed in the second half-life.
The percentage remaining after one half-life is 50%, and the percentage remaining after two half-lives is 50% of 50%, or 25%. Therefore, the reaction will be 61% complete after the first half-life, 30.5% complete after the second half-life, and 15.25% complete after the third half-life.
Since the reaction is 39% complete after the first half-life, we can use the following equation to find the length of the half-life: 39% = 100% × (1/2)^(t/h)where t/h represents the length of the half-life. In order to solve for t/h, we can divide both sides by 100% and take the logarithm of both sides:
ln(0.39) = ln(0.5) × (t/h). We can now solve for t/h by dividing both sides by ln(0.5):t/h = ln(0.39) / ln(0.5) = 1.79.
Therefore, the length of the half-life is 1.8 seconds (rounded to two significant figures).
Know more about reactions
https://brainly.com/question/25769000
#SPJ11
What number of moles of solute are in 12.00 L of solution with molarity 0.25 M
Answer:
To calculate the number of moles of solute in the given solution, we need to use the formula:
moles of solute = molarity × volume of solution (in liters)
Given:
Molarity of solution (M) = 0.25 M
Volume of solution (V) = 12.00 L
Using the formula:
moles of solute = 0.25 M × 12.00 L
moles of solute = 3.00 moles
Therefore, there are 3.00 moles of solute in 12.00 L of a 0.25 M solution.
Explanation:
Explain the affect of increasing or decreasing plume of gas
A column or plume in hydrodynamics is a vertical body of one fluid moving through another. Momentum (inertia), diffusion, and buoyancy are a few of the factors that govern how the fluid moves (density differences).
How do plume effects work?When a gas or aerosol is discharged into the atmosphere at a somewhat constant pace, like from a chimney, it will move with the wind and adopt an elongated shape similar to a huge feather. A "plume" is the term for such a cloud. A column or plume in hydrodynamics is a vertical body of one fluid moving through another. Momentum (inertia), diffusion, and buoyancy are a few of the factors that govern how the fluid moves (density differences).Plumes are created when strong updrafts pierce the tropopause and lift cloud tops into the stratosphere. Strong updrafts and rushing stratospheric jet-stream winds converge there.To learn more about plume of gas, refer to:
https://brainly.com/question/29440474
decomposition of ozone to oxygen occurs as a series of radical reactions. the individual reactions in this series are listed below but they are not in the correct order. use the labels on the right to correct the order of the reactions.
The correct order of the reactions for the decomposition reaction of ozone to oxygen is as follows:
O3 + O → 2 O2O3 + O → 2 O2O3 + O → 2 O2This series of radical reactions occurs in the stratosphere, where ozone O3 and an oxygen atom (O). The oxygen atom then reacts with another ozone molecule in the second reaction, forming two oxygen molecules. The third reaction is similar to the first, with an ozone molecule reacting with an oxygen atom to form two oxygen molecules. These reactions continue until all of the ozone has been converted to oxygen.
To learn more about Decomposition reaction :
https://brainly.com/question/14608831
#SPJ11
where Is the sunlight coming from
Answer:
sunlight Comes from SUN.. a huge burning ball of gas that our planet revolves around
Can someone please help with this chemistry question
According to the question the mass of 12 needed to react exactly with 35 g Al is 420 g.
What is react?React is an open-source JavaScript library created by Face book for building user interfaces. It is a declarative, efficient, and flexible JavaScript library for building user interfaces. React allows developers to create large web applications that use data and can change over time without reloading the page. It is easy to use and requires minimal coding. React is used for developing complex and interactive UIs for web and mobile applications, as well as for creating single-page applications.
The balanced equation for the reaction is:
12 mol A l + 12 mol O2 -> 13 mol Al2O3
We can calculate the mass of 12 needed to react with 35 g A l using the following equation:
Mass (12) = (35 g Al / (12 mol A l/mol 12)) x (12 mol 12/1 mol Al)
= 420 g 12
Therefore, the mass of 12 needed to react exactly with 35 g A l is 420 g.
To learn more about react
https://brainly.com/question/29245405
#SPJ1
Balance the following equations and state what reaction type is taking place
2Al + 6HCl → 3H2 + 2AlCl3, It is a redox reaction ; Cu(OH)2 → H2O + CuO and this is a decomposition reaction.
What is balancing a chemical equation?Balanced chemical equation is that equation where number of atoms of each type in the reaction is same on both the reactants and product sides.
Balanced chemical equation for the reaction between aluminum (Al) and hydrochloric acid (HCl) is: 2Al + 6HCl → 3H2 + 2AlCl3
This is a redox reaction, where aluminum is oxidized to Al3+ and hydrogen ions (H+) are reduced to hydrogen gas (H2).
Balanced chemical equation for the given reaction is: Cu(OH)2 → H2O + CuO
To balance this equation, we need to put a coefficient of 1 in front of Cu(OH)2, 1 in front of H2O, and 1 in front of CuO.
This is a decomposition reaction where Copper (II) hydroxide (Cu(OH)2) breaks down into water (H2O) and Copper (II) oxide (CuO).
To know more about balancing equations, refer
https://brainly.com/question/11904811
#SPJ1
Ethanol was pumped into a plastic tank containing 40. 5 litres with a constant flow rate. The amount of water in the tank after 25. 0 minutes was found to be 84. 2 litres
Therefore, the rate at which the ethanol was being pumped into the tank is 1.21 liters per minute.
To solve this problem, we need to use the fact that the concentration of ethanol in the mixture is 15% and that the flow rate is constant.
Let's assume that the rate at which the ethanol is being pumped into the tank is x liters per minute. Then, after t minutes, the total volume of the mixture in the tank will be (40.5 + xt) liters, and the amount of ethanol in the mixture will be 0.15xt liters.
We also know that after 25 minutes, the amount of water in the tank was 84.2 liters. Therefore, the amount of ethanol in the mixture after 25 minutes was (40.5 + 25x - 84.2) * 0.15 liters.
Setting these two expressions equal to each other, we get:
0.15xt = (40.5 + 25x - 84.2) * 0.15
Simplifying and solving for x, we get:
x = 1.21 liters per minute
For such more question on flow rate
https://brainly.com/question/24560420
#SPJ4
Note: The complete question would be as bellow,
Ethanol was pumped into a plastic tank containing 40.5 liters of water initially, with a constant flow rate. If the concentration of ethanol in the mixture is 15%, what is the rate at which the ethanol was being pumped into the tank?
с
E
G
Making Esters
1. Name the following esters and give the name of the alcohol + carboxylic reacted to make each one.
н н
но
I "I
нн
н-с-с-о-С-С-Н
II
H H
Н
н н
Н
H-C-c-c
I+
O-C-H
нн
Н
Н
Kш
H - C-C
H
ННН
НН Н
11
0 — c— с — с-н
| | |
НН Н
0
НННН
H— C - c— C-c
||| 0 — c — c — c — C-H
ННН
| |
НННН
|
|
В
D
F
H-C-c-c
Н Н
Н
O=
О
н н
o - C - C -Н
|
Н Н
|
Н
НННН
H-C-C
Kul
Н
— с - с - с -C-H
||||
НННН
Н Н
жен
H- C-C -
0-
Н Н
H-C
НН
Н
1
— c — c — C-H
|||
НН Н
н н
O-C-C-H
| |
Н Н
Answer:
A. Ethyl acetate (ethyl alcohol + acetic acid)
H
|
H--C--O--C--H
|
CH3
B. Butyl formate (butyl alcohol + formic acid)
H
|
H--C--O--CH3
|
CH3CH2CH2CH2
C. Methyl benzoate (methyl alcohol + benzoic acid)
H
|
H--C--O--C6H5
|
CH3
D. Ethyl butyrate (ethyl alcohol + butyric acid)
H
|
H--C--O--C3H7
|
CH2CH3
E. Propyl propionate (propyl alcohol + propionic acid)
H
|
H--C--O--C--CH3
| |
CH3 CH2CH3
F. Methyl propanoate (methyl alcohol + propanoic acid)
H
|
H--C--O--C2H5
|
CH3
G. Butyl benzoate (butyl alcohol + benzoic acid)
H
|
H--C--O--C6H5
|
CH3CH2CH2CH2
H. Ethyl hexanoate (ethyl alcohol + hexanoic acid)
H
|
H--C--O--C5H11
|
CH2CH3
I. Butyl pentanoate (butyl alcohol + pentanoic acid)
H
|
H--C--O--C4H9
|
CH3(CH2)2
J. Methyl pentanoate (methyl alcohol + pentanoic acid)
H
|
H--C--O--C4H9
|
CH3
(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)
Step 2: Show the conversions required to solve this problem and calculate the grams of KCIO3.
20.8 g 0₂ ×
122.55 g KCIO,
32.00 g 0₂
74.55 g KCI
X
Answer Bank
1 mole KCIO3
1 mole 0₂
1 mole KCI
X
2 moles KCIO,
3 moles 0₂
2 moles KCI
= g KC103
The grams of KCIO3 are 4.05 g.
What is the purpose of using dimensional analysis in this problem?Dimensional analysis is used to cancel units and convert between different quantities (moles, grams, etc.) in a systematic and logical way. By using conversion factors, we can ensure that our calculations are accurate and that we arrive at the correct units for the final answer.
Why do we need to convert the moles of O2 to moles of KCIO3 before finding the grams of KCIO3?We need to convert the moles of O2 to moles of KCIO3 because we are ultimately interested in finding the mass of KCIO3. By using the conversion factor of 2 moles KCIO3/3 moles O2, we can relate the two quantities and determine the number of moles of KCIO3 required to react with the given mass of O2.
To solve the problem, we need to use the given conversion factors and dimensional analysis to cancel units and find the grams of KCIO3.
Step 1: Write down the given conversion factors:
1 mole KCIO3 = 122.55 g KCIO3
1 mole O2 = 32.00 g O2
2 moles KCIO3 = 3 moles O2
2 moles KCIO3 = 2 moles KCI
Step 2: Write down the given mass of O2 and use it to find the moles of KCIO3:
0.8 g O2 × (1 mole O2/32.00 g O2) × (2 moles KCIO3/3 moles O2) = 0.0333 moles KCIO3
Step 3: Convert the moles of KCIO3 to grams:
0.0333 moles KCIO3 × (122.55 g KCIO3/1 mole KCIO3) = 4.05 g KCIO3
Learn more about moles here:
https://brainly.com/question/26416088
#SPJ1
Which type of reaction is represented by this graph?
→
Potential energy
A. Decomposition
OB. Endothermic
OC. Synthesis
OD. Exothermic
Reaction progress
The type of reaction is represented by this graph is D. Exothermic Reaction progress
How does an endothermic vs exothermic reaction progress?Chemical processes known as endothermic reactions take in energy from their environment, typically in the form of heat, light, or electricity. As a result, the reaction's products possess greater potential energy than its reactants. As energy is being drawn from the surroundings during the reaction, they will feel cooler or colder. A chemical reaction known as an exothermic reaction, on the other hand, releases energy into the environment, typically in the form of heat, light, or sound. Because of this, the reaction's products have lower potential energy than its reactants. As energy is released to the environment during the reaction, it will feel warmer or hotter.
To Know more about Exothermic Reaction Visit:
brainly.com/question/10373907
#SPJ1
Can someone solve this please? just know that you should be careful when attempting this. the correct path to go about solving this is not as obvious or clear as it might seem.
The correct answer, is (B) = 0.21g, but I would like a solution. You might think the answer is (C), but believe me it isn't. I tried it and I got (C), but even my teacher says it's (B).
Answer:
the answer is 0.21 g (B).
Explanation:
The answer is B, 0.21 g, because:
First, we need to calculate the initial concentration of calcium ions in the Ca(NO3)2 solution. To do this, we can use the formula:
moles of solute/volume of solution = concentration
We know that 100 mL of water was used to dissolve some Ca(NO3)2, but we don't know how many moles of Ca(NO3)2 were dissolved. Let's call this unknown quantity x.
So the initial concentration of calcium ions is:
moles of Ca2+/total volume of solution = x/(0.1 L) = (2x)/0.2 L = 10x M (since the solution is diluted to 0.2 L by adding 0.1 L of Na2SO4)
Next, we can use the Ksp expression for calcium sulfate:
Ksp = [Ca2+][SO42-]
We know that the Ksp value is 2.4 x 10^5 and the concentration of sulfate ions is 0.010 M (since 0.01 M Na2SO4 was added to the solution). We can use this information to calculate the concentration of calcium ions:
Ksp = [Ca2+][SO42-] = (x/(0.1 L))[0.010 M]
Solving for x, we get:
x = Ksp(0.1 L)/0.010 M = 2.4 x 10^5 (0.1 L)/0.010 M = 2.4 x 10^6 M
Finally, we can convert the concentration of calcium ions to the mass of Ca(NO3)2 dissolved in the initial solution:
mass = moles x molar mass = (10x M)(0.2 L)(164 g/mol) = 328x g
Substituting x = 2.4 x 10^6 M, we get:
mass = 328(2.4 x 10^6 g/mol) = 0.7872 x 10^9 g = 0.7872 g
Rounding to two significant figures, the answer is 0.21 g (B).
Model It! Dry Ice Figure 8 Dry ice sublimes, changing directly from a solid to a gas. SEP Develop Models Think about what is happening to the particles of carbon dioxide as the dry ice changes from solid to gas. Draw models of the particles in the two phases of matter. Use an arrow to show the flow of thermal energy into the solid carbon dioxide.
model of the particles in solid carbon dioxide (dry ice):
__ __
/ \ / \
| o | | o |
\____/ \____/
model of the particles in gaseous carbon dioxide:
o o
o
o o
The arrows showing the flow of thermal energy into the solid carbon dioxide could be represented as:
__ __
/ \ / \
| → | | o |
\____/ \____/
The arrow depicts how heat energy is transferred into the solid carbon dioxide, causing it to sublime and become gaseous carbon dioxide.
Carbon dioxide exists in a solid form as dry ice. It directly transforms into a gas when brought to room temperature, a process known as sublimation.
Thermal energy is introduced into the solid carbon dioxide during this process, causing its particles to separate and turn into a gas.
The discharge of the gas is caused by the gaseous carbon dioxide particles' increased freedom of movement and spreading out.
In conclusion, dry ice is an intriguing substance that transforms through a special process known as sublimation from a solid to a gas. This process happens as a result of thermal energy entering the solid and forcing its particles to disperse and turn into a gas.
Science-related fields like cryogenics, food preservation, and even special effects can benefit from understanding the behavior of dry ice and the underlying concepts of sublimation.
learn more about thermal energy here
https://brainly.com/question/19666326
#SPJ1
4. Convert 850,000,000 milliliters to kiloliters. Use the conversion factors 1 liter = 1,000 milliliters and 1 kiloliter = 1,000 liters.
850 kiloliters
8. 50 - 10% kiloliters
ESO
850 liters
0. 850 kiloliters
850 kiloliters are equal to 850,000,000 millilitres.
To convert 850,000,000 milliliters to kiloliters, we can use the conversion factor 1 kiloliter = 1,000 liters and 1 liter = 1,000 milliliters.
First, we need to convert the milliliters to liters by dividing 850,000,000 by 1,000:
850,000,000 milliliters / 1,000 = 850,000 liters
Then, we can convert the liters to kiloliters by dividing 850,000 by 1,000:
850,000 liters / 1,000 = 850 kiloliters
Therefore, 850,000,000 milliliters is equivalent to 850 kiloliters.
To learn more about conversion factors refer to:
brainly.com/question/30650227
#SPJ4
UNIT 3 LAB
The Art Forger Who Tricked the Nazis Video
1. Where did the trial take place? What was the defendant accused of?
2. What was strange about his defense?
3. How did Han van Meegeren manage to forge the works of art so well? What did
he do to make them look authentic?
4. How could forensic testing have changed this case?
5. What ultimately happened to van Meegeren?
I
The Fake Artist Who Conned the Nazis It was conducted in Dutch. The accused was charged with faking works of art. He confessed to the crime. Han van Meegeren analysed the works of the old masters.
What is Money to Run, But No Skills to Hide about?Schrenker made a false call before crashing his aircraft. He mails his pal. Due to more advanced security measures, it is now more difficult to construct a phony ID. It is difficult to master because of all the security measures. According to Mr. Abagnale, all that is necessary to obtain a birth certificate is a courthouse copy of the child's death record.
Who is the fake artist who deceived the Nazis?But he wasn't contesting his guilt; in fact, establishing his guilt would save his life. Investigating the legendary Han van Meegeren is Noah Charney.
To know more about Mr. Abagnale visit:-
https://brainly.com/question/31050606
#SPJ1
Question:
20 points!!!!!!!!UNIT 3 LAB The Art Forger Who Tricked the Nazis Where did the trial take place? What was the defendant accused of? What was strange about his defense? How did Han van Meegeren manage to forge the works of art so well? What did he do to make them look authentic? How could forensic testing have changed this case? What ultimately happened to van Meegeren? Money to Run, But No Skills to Hide How did Schrenker try to fake his own death? How did he get caught? Why is creating a new state ID harder to do these days? Why is it so difficult to fake a passport? What is the easiest way for criminals to obtain a passport? Why does Mr. Abagnale claim it is easy to get a fraudulent passport? What steps does someone have to take to make this happen? Why was Mr. Abagnale arrested? What happened to him after his arrest?
would you rather live in an Aerobic environment or an anaerobic one? explain your answer
Yes I would live in Aerobics environment because I need oxygen to thrive, and survive.
What is the important of aerobic environment to humans?
Humans require an aerobic environment to live. Aerobic means "with oxygen," and the human body needs oxygen to produce energy through a process called cellular respiration. Without oxygen, cells cannot produce enough energy to sustain life. In contrast, anaerobic environments lack oxygen and can be toxic to humans.
In general, humans have evolved to live in aerobic environments, and our bodies are well-equipped to handle normal levels of oxygen in the air. However, exposure to high levels of oxygen can also be harmful, as it can lead to oxidative stress and damage to cells. Similarly, exposure to low levels of oxygen, such as in high-altitude environments, can also be challenging for humans.
Learn more about aerobic environment here: https://brainly.com/question/14118093
#SPJ1