9. water draining from an abandoned coal mine is likely to have a. excess of hydrogen ions and a high ph c. excess hydrogen ions and a low ph b. excess hydroxide ions and a low ph d. excess of hydroxide ions and a high ph

The density of iron that  crystallizes in a body-centered cubic cell having an edge length of 287.0 pm is 7.87g/cm³

In this case, iron is the given object, and we utilize the atomic number of iron to determine density, which is the ratio of the given object's mass to its volume.

Length = 287pm = 287x10⁻¹⁰cm, as we are aware.

Fe's atomic mass is 56.0u with a Z=2 configuration (for body centered cubic unit cell)

Na is Avogadro number = 6.022 x 10²³

Density = ZM / a³N

Z=body-centered cubic unit cell,

a=Length Density

Substituting the above values in the density formula we get:

Density = ZM / a³N

ρ= (2 x 56)/(287x10⁻¹⁰cm)³ (6.022 x 10²³).

ρ=7.87g/cm³

Learn more about density at https://brainly.com/question/14831918

#SPJ4

The balanced chemical formula for the reaction of silver sulphide and aluminium is

3Al + 4Ag2S 6Ag + Al2S3.

The balanced equation's stoichiometry can be used to calculate how many moles of silver were produced during the reaction. In other words, for every 4 moles of silver sulphide, 6 moles of silver are produced due to the silver's 4/4 coefficient on the reactant side and 6/6 coefficient on the product side.

The number of moles of silver produced by the reaction of 6 moles of aluminium and 4 moles of silver sulphide is 6. The balanced equation's stoichiometry, which states that 4 moles of silver sulphide result in the production of 6 moles of silver, can be used to determine this.

Learn more about Stoichiometry here: https://brainly.com/question/30215297

#SPJ4

Answer:

The soil nutrients will be depleted

Explanation:

Rotating crops provides productivity benefits by improving soil nutrient levels and breaking crop pest cycles.

(a) 25.00 mL of a 2.430 M HCI solution:

Moles of HCI = (2.430 M)(0.0250 L) = 0.06075 mol

Moles of NaOH = Moles of HCI = 0.06075 mol

Volume of NaOH = (0.06075 mol NaOH)/(1.420 M NaOH) = 0.0429 L = 42.9 mL

(b) 25.00 mL of a 4.500 M H2SO4 solution:

Moles of H2SO4 = (4.500 M)(0.0250 L) = 0.1125 mol

Moles of NaOH = Moles of H2SO4 = 0.1125 mol

Volume of NaOH = (0.1125 mol NaOH)/(1.420 M NaOH) = 0.0791 L = 79.1 mL

(c) 25.00 mL of a 1.500 M H3PO4 solution:

Moles of H3PO4 = (1.500 M)(0.0250 L) = 0.0375 mol

Moles of NaOH = Moles of H3PO4 = 0.0375 mol

Volume of NaOH = (0.0375 mol NaOH)/(1.420 M NaOH) = 0.0264 L = 26.4 mL

What is moles?

Moles in chemistry is a unit of measurement used to quantify the amount of a substance. It is based on the number of atoms, molecules, or other particles present in a given sample.

To learn more about moles

Here: https://brainly.com/question/24191825

#SPJ1

When we are looking at an element on the periodic table, its mass number helps us determine that the element has multiple naturally-occurring isotopes as the isotopes differ in mass.

Isotopes are those atoms which have the same no. of protons but have different no. of neutrons. Isotopes of a particular element have the same atomic no. but they have different mass numbers. The isotopes of an element are given the same position in the modern periodic table.

The mass number of an element is determined by the total no. or protons and neutrons that are present in its nucleus. For example, there are three isotopes of atom namely protium (¹H), deuterium (²H) and tritium (³H) which differ in the number of neutrons present in the nucleus.

To know more about isotopes here

https://brainly.com/question/13662697

#SPJ4

Solids, liquids, and gases differ in terms of packaging of the atoms in its constituent atomic level.

Solids, liquids, and gases are the three main states of matter. They differ in the way their atoms or molecules are arranged and how they interact with one another. Solids have a definite shape and a definite volume. The atoms or molecules in a solid are tightly packed together and are not free to move around. Solids also have a low compressibility and a high density. Liquids have a definite volume but no definite shape. They take the shape of their container. The atoms or molecules in a liquid are close together but are free to move around. Liquids have a low compressibility and a lower density than solids. Gases have no definite shape or volume. They expand to fill their container. The atoms or molecules in a gas are widely spaced and are free to move around. Gases have a high compressibility and a low density. Examples of gases include air, oxygen, and natural gas. In summary, Solids have a fixed shape and volume, liquids take the shape of their container, have a definite volume and gases have no fixed shape or volume and expand to fill their container.

To know more about atoms please refer: https://brainly.com/question/1566330

#SPJ4

A student dilutes the 11.4 ml of a 7.04 M perchloric acid solution to the total volume of 200.0 ml. The concentration of the diluted solution is 0.40 M.

The Volume of stock solution, V₁ = 11.4 mL

The Molarity of stock solution, M₁ = 7.04 M

The Volume of diluted solution, V₂ = 200 mL

The molarity of diluted solution, M₂ = ?

The dilution law is given as :

M₁V₁ = M₂V₂

M₂ = M₁ V₁ / V₁

M₂ = ( 7.04 × 11.4 ) / 200

M₂ = 0.40 M

Thus, The molarity of the diluted solution is 0.40 M.

To learn more  volume here

https://brainly.com/question/28232612

#SPJ4

The gauge pressure inside such a bulb when it is hot is 1.3 x 10⁴. The final actual gauge pressure is 1.14 x 10⁵ Pa

According to Gay-Law, Lussac's pressure and absolute temperature are exactly related for a constant volume. P/T = K, or P alpha T, where K is a constant, and similarly

Consequently, using the gas equation and the supplied values as replacements:

P₁ / T₁ = P₂ / T₂

P₂ = P₁ /T₁ X T₂

P₂ = 1.01 x10⁵/ 293  x 331

P₂ = 1.14 x 10⁵ Pa

Thus,

Pgauge = P₂ - P atm

P gauge = 1.14 x10⁵ - 1.01 x10⁵ =  1.3 x 10⁴

Gauge pressure is the term used to describe the pressure that is measured by atmospheric pressure.

When internal pressure exceeds atmospheric pressure locally, the term "gauge pressure" is used.

As per the given data, we have to determine the final actual gauge pressure.

Initial pressure = Pₐ=  atmospheric pressure

Final pressure = P +Pₐ

Final pressure = 1.3 x 10⁴ + 1.01 x10⁵ =  1.14 x 10⁵ Pa

Find more information about "Gay-Lussac's Law" here:

brainly.com/question/24691513

#SPJ4

The density of this metal sample is 2.32 g/mL.

To calculate the density of a sample of metal, we divide the mass of the sample by its volume. The density of an object is usually measured in g/cm³ (grams per cubic centimeter) or g/mL (grams per milliliter).

The formula for density is:

density = mass / volume

In this case, the mass of the metal is 17.08 g and its volume is 7.34 ml.

So we can calculate density by substituting these values into the formula:

density = 17.08 g / 7.34 ml = 2.32 g/mL

So, the density of this metal sample is 2.32 g/mL.

It's important to note that density of a metal is a characteristic property, so it can be used to identify a metal.

To know more about density click here:

https://brainly.com/question/29775886#

#SPJ4

Answer:

33 m/s.

Explanation:

Since in 1 second, you walk 3 meters so in 11 seconds, you will walk 33 m/s.

1 second = 3 meters.

11 seconds = 11 x 3 m/s = 33 m/s

If you walk at a speed of 3 meters per second (m/s),  33 m/s you walk in 11 seconds. Speed may be described as the distance an item goes with relation to the time something takes to complete the task.

The distance that an item travels in relation to the period of time it takes to complete this task may be used to define speed. In other terms, it refers to a measurement of an object's motion's speed without direction Velocities are what we get when speed and direction are combined.

Speed may be described as the distance an item goes with relation to the time something takes to complete the task. To put it differently, it refers to a measurement as to how swiftly something travels. Speed is measured in metres per second, or m/s, since the distance is measured in meters and the time is measured in seconds.

1 second = 3 meters.

11 seconds = 11 x 3 m/s = 33 m/s

Therefore, if you walk at a speed of 3 meters per second (m/s),  33m/s you walk in 11 seconds.

To know more about speed, here:

https://brainly.com/question/28238258

#SPJ2

The sandstone is younger if the granite contains sandstone inclusions. The sandstone is younger if it shows evidence of contact metamorphism.

Geologists are scientists that research the Earth's processes, materials, history, and natural features. There are other subcategories of geologists, including economic geologists who search for and exploit the planet's resources and environmental geologists who research how humans interact with the natural world.

Geologists examine the Earth's components, operations, byproducts, physical characteristics, and past. In connection to the geologic, climatic, and human processes that shape them, geomorphologists study the landforms and landscapes of the planet.

Those who study the Earth's surface and the materials that make it up are known as geologists. Geology, or the study of rocks, is the name of this field of study.

To learn more about geologist refer to:

https://brainly.com/question/1490622

#SPJ1

An effective technique to show the connections between various concepts, ideas, and pieces of knowledge is through the use of concept maps.

To learn more about concept maps refer to:

https://brainly.com/question/27704176

#SPJ1

Magnesium and oxygen interact to create light that is so intense that it temporarily renders you blind.

To learn more about Magnesium refer to:

https://brainly.com/question/1533548

#SPJ1

ion-ion forces N/A, dipole-dipole forces-CH3OH-HF, ion-dipole forces MgI2,CuCl2, London dispersion forces N/A, hydrogen bonding -C2H5OH and NH3

London dispersion forces are a particular kind of intermolecular force that affects atoms and molecules that are typically electrically symmetric, meaning that the distribution of the electrons with respect to the nucleus is symmetric. The forces of van der Waals include them. After the German physicist Fritz London, the LDF was created. An atom's unequal distribution of electrons results in London dispersion forces. As a result, the atom acquires a slight negative () and slight positive () charge on either side. There is now a transient dipole in place. This transient dipole may cause a transient dipole on an adjacent atom or molecule.

the following substances dissolve when added to water. classify the substances according to the strongest solute-solvent interaction that will occur between the given substances and water during dissolution.

1. CH3OH

2.MgCl2

3. CUCl2

4. NH3

5.C2H5OH

Learn more about London dispersion forces here:

https://brainly.com/question/20514601

#SPJ4

A. 3,013 seconds is the half-life for a first-order reaction that has a rate constant of 2. 3 x 10^-4s^-1

A reaction's half-life is the amount of time needed for the reactant concentration to drop to half its initial value. The concentration of the reactant has no bearing on the half-life of a first-order reaction. It is a constant and connected to the reaction's rate constant: t1/2 = 0.693/k. The phrase is frequently used in nuclear physics to refer to how long stable atoms last or how quickly unstable atoms decay radioactively.

half life (t1/2) = 0.693/ k

rate constant= 2.3*10-4

t1/2 = 0.693/2.3*10-4

t1/2= 3013 seconds

Learn more about half life here:

https://brainly.com/question/24710827

#SPJ4

The conjugate base of a Bronsted-Lowry acid is the species formed after an acid donates a proton.

what is  conjugate acid and base?

To learn more about acid and base refers to:

https://brainly.com/question/9836972

#SPJ4

The response variable in this experiment is the quiz score of each volunteer.

This is the variable that the scientists are measuring in order to determine the effects of caffeine on short term memory. The quiz score will be used to compare the performance of the group that consumed caffeine to the group that consumed the placebo, in order to determine whether caffeine has a positive or negative impact on short-term memory. The quiz score is the outcome that is being measured and is the variable that will be used to draw conclusions about the effect of caffeine on memory.

To learn more about response variable:

https://brainly.com/question/22046153

#SPJ4

Answer:

To calculate the number of molecules in 12.3 moles of SO3, we can use the Avogadro's number, which is the number of atoms or molecules in one mole of a substance. Avogadro's number is approximately 6.022 x 10^23 atoms or molecules per mole.

To calculate the number of molecules in 12.3 moles of SO3, we can multiply Avogadro's number by the number of moles of SO3:

Number of molecules = Avogadro's number x moles of SO3

Number of molecules = 6.022 x 10^23 x 12.3

Number of molecules = 7.34 x 10^24

So there are approximately 7.34 x 10^24 molecules in 12.3 moles of SO3.

the complete statement in liquid spill cleanup is 1- Surround the area with barriers, then cover the spill. 2- Scoop up the material and place it in a container.

steps for liquid spill cleanup are:

Identify and assess the type of liquid spilled.

Put on appropriate personal protective equipment (PPE)

Alert others in the area and evacuate if necessary.

Surround the area with barriers, such as caution tape or cones, to prevent anyone from entering the area.

Use absorbent materials, such as sand, clay, or kitty litter, to cover the spill and contain it.

Scoop up the material and place it in a container for proper disposal.

Clean the area with a neutralizing agent if necessary.

Dispose of the waste in accordance with local and federal regulations.

Check for any remaining traces of the spill and clean if necessary.

Document the incident and make sure it is properly reported if required by regulations.

Learn more about liquid spill cleanup here:

https://brainly.com/question/30246211

#SPJ4

Answer:

The reaction of calcium metal with water to form calcium hydroxide and hydrogen gas can be represented by the following balanced equation:

Ca(s) + 2H2O(l) → Ca(OH)2(aq) + H2(g)

In this equation, "Ca" represents calcium metal, "H2O" represents water, "Ca(OH)2" represents calcium hydroxide, and "H2" represents hydrogen gas. The state symbols (s) , (l) and (aq) represent solid, liquid and aqueous state respectively.

This equation represents the transfer of electrons from the calcium metal to the water molecules, resulting in the formation of calcium hydroxide (a base) and hydrogen gas. The equation is balanced, with one calcium atom on the reactant side and one on the product side, and two water molecules on the reactant side and one calcium hydroxide molecule and two hydrogen atoms on the product side.

Taking into account the reaction stoichiometry, given 0.842 g of NH₃ and 0.728 g of O₂, NH₃ is the excess reactant.

The balanced reaction is:

4 NH₃ + 5 O₂ → 4 NO + 6 H₂O

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The limiting reactant is the one that is found in the least amount and, therefore, will be finished first at the time of the chemical reaction, resulting in the end of the reaction. In other words, when this reagent is finished, it will no longer be possible to continue generating a certain product.

The reactant in excess is one of which there is more than what is necessary for the chemical reaction to take place.

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 68 grams of NH₃ reacts with 160 grams of O₂, 0.842 grams of NH₃ reacts with how much mass of O₂?

mass of O₂= (0.842 grams of NH₃× 160 grams of O₂)÷68 grams of NH₃

mass of O₂= 1.98 grams

But 1.98 grams of O₂ are not available, 0.728 grams are available. Since you have less mass than you need to react with 0.842 grams of NH₃, O₂ will be the limiting reagent.

Then, NH₃ will be the excess reactant.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

a. Gases have particles that move rapidly in all directions, frequently colliding with each other and the side of the container  resulting in no definite shape or volume.

b. Liquids  have particles can move around one another resulting in the particles being strong enough to hold a specific volume.

c. Solids have particles vibrate around fixed positions resulting in the particles vibrate faster and faster until they have enough energy to break away from their fixed positions.

A particle is described as a small localized object which can be described by several physical or chemical properties, such as volume, density, or mass.

In conclusion, the particles in solids are very close together, therefore they cannot usually be compressed or squashed.

Learn more about particles at: https://brainly.com/question/11066673

#SPJ1

Patterns of electrons and the periodic table. Since the periodic chart lists elements in order of their atomic numbers, it is simple to calculate an element's electron number from its atomic number.

A negatively charged atom known as an electrons can either be free or attached to an atom (not bound). One of the three main types of particles within an atom is an electron that is bonded to it; the other two are protons and neutrons.

The positively charged particles known as electron revolve around the outside of the nucleus. For scientists, it might be challenging to monitor them because of how quickly they spin. They are drawn to the protons' positive charge. And are the tiniest elements of an atom; a proton has 2000 of them.

To know more about Electron visit:

https://brainly.com/question/20513633

#SPJ4

When a pot of liquid water is boiled, the water turns to steam and rises into the air. This is an illustration of a physical change, specifically a phase change.

When water is heated, the energy added to the water causes the water molecules to move faster and overcome the forces holding them together in a liquid state. This causes the water molecules to change into a gaseous state or steam. The water molecules have not formed a new substance, they have simply changed from a liquid to a gas. A physical change is a type of change in which a substance changes form or appearance, but not its chemical composition. Physical changes are generally reversible, meaning that the original substance can be recovered by reversing the process. Examples of physical changes include changes of state (such as melting, freezing, boiling, or condensation), changes in particle size (such as grinding or cutting a solid), and changes in particle shape or arrangement (such as bending or stretching a solid).

Learn more about physical change here:

https://brainly.com/question/11321843

#SPJ4

Answer: 215.0%

Explanation:

Sugar is solute while water is solvent.

Solution can be defined as a homogeneous mixture of two or more components in which one component is uniformly distributed in another component. The solvent is known to be a substance that dissolves the other substance and is present in a greater amount.

Solubility is the ability of a substance solute to dissolve in another substance solvent. When you add sugar to water the sugar dissolves and the mixture becomes a solution. In this  method sugar is the solvent and water is the solution

Learn more about solution here: brainly.com/question/24372553

#SPJ1

The reactants combine to create the final product in both processes. A chemical reaction involves an electron rearrangement rather than the nucleus of an element changing as in a nuclear reaction.

An atom's nucleus changes during nuclear reactions, typically creating a new element. On the other hand, nuclear modifications do not occur during chemical reactions; rather, only the arrangement of electrons does. The behavior of various isotopes of an element in chemical reactions is typically similar.

In both processes, the reactants unite to produce the end result. While an element's nucleus changes in a nuclear reaction, an electron rearrangement occurs in a chemical reaction.

Outside of the nucleus, chemical reactions typically take place. Only within the nucleus do nuclear reactions occur. When chemical processes take place, elements retain their identity, and atom nuclei likewise do not change. Atomic nuclei totally transform and new elements are created during nuclear processes.

To learn more about reactions refer to:

https://brainly.com/question/11231920

#SPJ1

The pressure of the gas produced is approximately 587.17 kPa.

To solve this problem, we first need to find the amount of gas produced by the reaction of aluminum hydroxide with ammonium persulfate, then use the Ideal Gas Law (PV = nRT) to calculate the pressure.

First, let's find the number of moles of ammonium persulfate by using the molar mass:

10.35 g ÷ (2 * (1 + 32 + 64 + 16)) g/mol = 0.108 mol

Next, let's find the number of moles of aluminum hydroxide:

613.28 mL * 2.744 M = 1692.04 mol

Now, let's assume that the reaction goes to completion and that all the aluminum hydroxide reacts with ammonium persulfate, so the number of moles of gas produced will be equal to the number of moles of ammonium persulfate:

0.108 mol

Finally, we can use the Ideal Gas Law to calculate the pressure:

P = (n * R * T) / V

where n = 0.108 mol, R = 8.31 J/mol K, T = (42.455 + 273.15) K, and V = 1536.70 mL * 10^-3 L

P = (0.108 * 8.31 * (42.455 + 273.15)) / (1536.70 * 10^-3)

P = (0.108 * 8.31 * 315.605) / (1.5367)

P = 905.752 / 1.5367

P = 587.17 kPa

So, the pressure of the gas produced is approximately 587.17 kPa.

Read more about pressure here:

https://brainly.com/question/28012687

#SPJ1

The oxidation of citronellal to citronellic acid was studied using molecular oxygen as oxidant and gold-containing supported catalysts under aqueous conditions.

What is citronellol?

To learn more about citronellol refers to:

https://brainly.com/question/13977729

#SPJ4

Answer:

The correct answer is B. Cs+ represents a cesium ion.