The magnitude and direction of the force on the charge is -12 N opposite the electric field
To calculate the force on a charge in an electric field, we make use of the formula below.
Formula
F = E×Q .......................... Equation 1
Where:
F = Force on the chargeE = Electric FieldQ = chargeFrom the question,
Given:
E = 200 N/CQ = -0.06 CSubstitute these values into equation 1
F = 200(-0.06)F = -12 NNote: The negative sign indicates that the force is in the direction negative of the electric field.
Hence, The magnitude and direction of the force on the charge is -12 N opposite the electric field
Learn more about Electric Field here: https://brainly.com/question/14015797
Answer: A edge 202694020
Explanation:
a car travels at a constant speed of 20m/s and yet it does not have a constant velocity. explain how this could be
Answer:
HOPE THIS HELPS!!
Explanation:
Velocity is speed as well as distance mentioned.
The car is traveling at a constant speed of 20m/s but it may not be traveling in any particular direction. It would be taking many turns (left and right) or it would be moving in a circular manner.
So,it is at constant speed but not constant velocity.
If a 75 kg box collides with a stationary 35 kg box with a force of 110 N, what must be true of the magnitude of the reaction force?
According to Newton third law of motion, what must be true of the magnitude of the reaction force is that the reaction force will be equal and opposite to the action force of 110 newtons
From Newton third law of motion which state that in every action of force, there will be equal and opposite reaction.
If a 75 kg box collides with a stationary 35 kg box with a force of 110 N, the mass 35 kg will produce a reaction force which is equal and opposite to the action force 110 newton received from mass 75 kg.
Therefore, what must be true of the magnitude of the reaction force from mass 35 kg is that the mass will produce an equal and opposite force equal to 110 Newtons.
Learn more about collision here: https://brainly.com/question/7579673
please someone help me understand this question
[tex]\\ \sf\longmapsto F=\dfrac{Gm_1m_2}{r^2}[/tex]
m1 and m2 has same units let both be m[tex]\\ \sf\longmapsto F=\dfrac{Gm^2}{r^2}[/tex]
[tex]\\ \sf\longmapsto G=\dfrac{Fr^2}{m^2}[/tex]
SI units:-
F=Newton (N)r=metre(m)mass=m=kg[tex]\\ \sf\longmapsto G=\dfrac{Nm^2}{kg^2}[/tex]
Option C is correct
The magnitude, M, of an earthquake is represented by the equation M=23logEE0 where E is the amount of energy released by the earthquake in joules and E0=104. 4 is the assigned minimal measure released by an earthquake. In scientific notation rounded to the nearest tenth, what is the amount of energy released by an earthquake with a magnitude of 5. 5?.
An earthquake with a magnitude of 5.5 releases 4.5 × 10¹² J of energy.
What is the magnitude of an earthquake?The magnitude of an earthquake is a number that characterizes the relative size of an earthquake and is based on the measurement of the maximum motion recorded by a seismograph.
If the magnitude of the earthquake is M = 5.5, we can calculate the amount of energy released (E) using the following expression.
[tex]M = \frac{2}{3} log(\frac{E}{E_0} )\\\\E = E_0 \times 10^{\frac{3}{2}M } = 10^{4.4} \times 10^{\frac{3}{2}(5.5) } = 4.5 \times 10^{12} J[/tex]
where,
E₀ is the assigned minimal measure released by an earthquake.An earthquake with a magnitude of 5.5 releases 4.5 × 10¹² J of energy.
Learn more about earthquakes here: https://brainly.com/question/18109453
What is the height of the Golden Bridge?
Answer:
hi your answer to this question is 220'
Explanation:
hope this helped you
19. A beach ball is rolling in a straight line toward you at a speed of 9 m/sec. Its momentum is 3 kg'm/sec.
What is the mass of the beach ball? moss - 0.33
aroto from 10mle to speed of 14 m/s The mass of the bicycle
The mass of the beach ball is 0.33 kg
From the question,
We are to determine the mass of the beach ball.
Using the formula
ρ = mv
Where ρ is the momentum
m is the mass
and v is the velocity
From the given information,
ρ = 3 kg m/sec
v = 9 m/sec
Putting the parameters into the formula, we get
3 = m × 9
∴ m = 3 ÷ 9
m = 0.33 kg
Hence, the mass of the beach ball is 0.33 kg
Learn more here: https://brainly.com/question/20345538
Calculate the weight of the object of mass
20kg. (g= 10 m/s^2)
Answer:
mass= 20kg
g=10m/s2
weight is F=mg
F=20×10
F=200N
A Person is carrying 6kg in one hand and 5kg in another.Calculate the resultant force applied by him
electromagnetic radiation at its maximum wavelength is:
Answer:
the radio wave. - The frequency ranges between 300 gigahertz (GHz) to 30 hertz (Hz).
Explanation:
A 2-year-old child is prescribed cyclosporine. The parent says the child doesn't like taking the liquid medication. Which statement by the nurse is most appropriate
Given what we know, we can say that the most appropriate response by the nurse is to indicate that the parent should dilute the medicine in chocolate milk in order to make it more palatable.
Why is this an appropriate response?This is an appropriate response given that it offers a possible solution for the problem.The nurse is first showing that the problem presented by the parent is being taken seriously.Then, without criticizing the parent, a healthy and viable solution is offered.Therefore, we can confirm that since this response is a calm and thought-out response that respects the patient and offers a viable solution, it can be considered the most appropriate statement by the nurse.
To learn more about Nursing care visit:
https://brainly.com/question/6685374?referrer=searchResults
How would you explain conduction?
Answer:
the meaning of conduction is the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.
Explanation:
Answer:
the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material.
Explanation:
Explain the relationship between pitch and frequency.
Answer:
Though pitch and frequency are not equivalent, they are correlated. This means that as one goes up, the other does as well. A higher frequency produces a higher pitch, and a lower frequency produces a lower pitch.
Explanation:
Question 4 of 10
When you go along with a group because you don't want to cause trouble, it is
called:
A. informational social influence.
B. normative social influence.
C. attribution
.
D. fundamental social influence.
Answer:
Normative
Explanation:
It is normal occurance but not unnatural
Find the heat energy is required to change 2Kg of ice at 0 C to water at 20 C ( specific latent heat of fusion of water = 336000 J/Kg and specific heat of capacity of water = 4200 J/Kg C
We want to find the energy that we need to transform 2kg of ice at 0°C to water at 20°C.
We will find that we must give 840,000 Joules.
First, we must change of phase from ice to water.
We use the specific latent heat of fusion to do this, this quantity tells us the amount of energy that we need to transform 1 kg of ice into water.
So we need 336,000 J of energy to transform 1kg of ice into water, and there are 2kg of ice, then we need twice that amount of energy:
2*336,000 J = 672,000 J
Now we have 2kg of water at 0°C, and we need to increase its temperature to 20°C.
Here we use the specific heat, it tell us the amount of energy that we need to increase the temperature per mass of water by 1°C.
We know that:
specific heat of capacity of water = 4200 J/kg°C
This means that we need to give 4,200 Joules of energy to increase the temperature by 1°C of 1kg of water.
Then to increase 1°C of 2kg of water we need twice that amount:
2*4,200 J = 8,400 J
And that is for 1°C, we need to give that amount 20 times (to increase 20°C) this is:
20*8,400 J = 168,000 J
Then the total amount of energy that we must give is:
E = 672,000 J + 168,000 J = 840,000 J
If you want to learn more, you can read:
https://brainly.com/question/12474790
The density of air is 1.3 kg/m'. Calculate the mass of air in the room.
Answer:
The density of air is 1.3 kg/m'. Calculate the mass of air in the room.
A bullet of mass M1, is fired towards a block
of mass m2 initially at rest at the edge of a
frictionless table of height h as in the figure.
The initial speed of the bullet is vi. Consider
two cases. a соmрlеtеlу inсlаѕtiс one and an
elastic one where the bullet bounces off the block. What is the flight ratio time?
The ratio of time of flight for inelastic collision to elastic collision [tex](t_A :t_B)[/tex] is 1:2
The given parameters;
mass of the bullet, = m₁mass of the block, = m₂initial velocity of the bullet, = u₁initial velocity of the block, = u₂ = 0Considering inelastic collision, the final velocity of the system is calculated as;
[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\m_1u_1 + 0 = v(m_1 + m_2)\\\\v= \frac{m_1u_1}{m_1 + m_2} \ -- (1)\\\\[/tex]
The time of motion of the system form top of the table is calculated as;
[tex]v = u + gt\\\\v = 0 + gt\\\\v = gt\\\\t= \frac{v}{g} \\\\t_A = \frac{m_1u_1}{g(m_1 + m_2)} \ \ ---(2)[/tex]
Considering elastic collision, the final velocity of the system is calculated as;
[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\m_1u_1 + 0 = m_1v_1 + m_2v_2\\\\m_1 u_1 = m_1v_1 + m_2v_2[/tex]
Apply one-directional velocity
[tex]u_1 + (-v_1) = u_2 + v_2\\\\u_1 -v_1 = 0 + v_2\\\\v_1 = v_2 -u_1[/tex]
Substitute the value of [tex]v_1[/tex] into the above equation;
[tex]m_1u_1 = m_1(v_2 - u_1) + m_2 v_2\\\\m_1u_1 = m_1v_2 -m_1u_1 + m_2v_2\\\\2m_1u_1 = m_1v_2 + m_2v_2\\\\2m_1u_1= v_2(m_1 + m_2)\\\\v_2 = \frac{2m_1u_1}{m_1+ m_2} \ --(3)[/tex]
where;
[tex]v_2[/tex] is the final velocity of the block after collision
Since the bullet bounces off, we assume that only the block fell to the ground from the table.
The time of motion of the block is calculated as follows;
[tex]v_2 = v_0 + gt\\\\v_2 = 0 + gt\\\\t = \frac{v_2}{g} \\\\t_B = \frac{v_2}{g} \\\\ t_B = \frac{2m_1u_1}{g(m_1 + m_2)} \ \ ---(4)[/tex]
The ratio of time of flight for inelastic collision to elastic collision is calculated as follows;
[tex]\frac{t_A}{t_B} = \frac{m_1u_1}{g(m_1 + m_2)} \times \frac{g(m_1 + m_2)}{2m_1u_1} \\\\\frac{t_A}{t_B} = \frac{1}{2} \\\\t_A:t_B = 1: 2[/tex]
Learn more about elastic and inelastic collision here: https://brainly.com/question/12497950
If the force to stretch a spring is given as k = (100N/m), then what is the potential energy of the spring if it is stretched 1 meters from rest?
Answer:
50 Joules
Explanation:
ASAP!!!!!!!! Parts of a Microscope: Use the following word bank to identify the following parts of the microscope.
Body Tube
Ocular Lens ( eye piece)
Revolving Nose piece Arm
Objectives (three of these) Diaphragm
Stage clips
Stage
Light Source
Base
Course Adjustment Knob
Fine Adjustment Knob
Answer:
1. Body Tube
2.Revolving Nose Piece
3.Low Objective
4.Med Objective
5.High Objective
6.Stage clips
7.Diaphragm
8.Light source
9.Ocular lens
10. Arm
11.Stage
12.Coarse Adjustment knob
13.Fine Adjustment knob
14. base
A water-skier is being pulled by a tow rope attached to a boat. As the driver pushes the throttle forward, the skier accelerates. A 73.5-kg water-skier has an initial speed of 5.2 m/s. Later, the speed increases to 12.2 m/s. Determine the work done by the net external force acting on the skier.
ANSWER FOR BRAINLIEST IF ANSWER IS GOOD
Ignore my comment, that information is unnecessary.
Assuming no friction between the skis and the water, the total work performed on the skier is due only to the pulling force (T, for tension). By Newton's second law, the net force exerted on the skier is
∑ F = T = ma
where m = 73.5 kg is the mass of the skier, and a is their acceleration.
Under constant acceleration, the skier is pulled a distance x such that
(12.2 m/s)² - (5.2 m/s)² = 2ax
and solving for x gives
x = (60.9 m²/s²) / a
Then the total work performed on the skier is
W = Tx
W = ma • (60.9 m²/s²) / a
W = (73.5 kg) (60.9 m²/s²)
W ≈ 4480 J
How long does it take a car traveling at 45km/h to travel 100.0 m?
Answer:
8 seconds
Explanation:
Since the carspeed is in km/h, we need equal units, so we will make 100.0m 0.1000km.
Then we need to find how long it takes the car to travel 0.1km
We can use the formula distance=speed * time and get
0.1=45 * time
Therefore we get .002222... hours
Multiplying this by 3600 (to get seconds, 60x60), we get 8 seconds
Answer:
8m/s
Explanation:
speed = 45km/h
Distance = 100m
we have to find time = ?
Formula for speed is = Distance/ Time
Here Distance is given in 'm' so we need to convert speed value in 'm'
So to convert km/h in m formula is divide 45km/h by 3.6 then the km/h value gets converted in m so now the value is 12.5 m/s
So now,
speed = Distance/Time
we have to find Time
Then,
Time = Distance/ Speed
= 100/12.5
= 8m/s
PLZZZ HELPPP ASAP
I really need help as soon as possible
Answer:
Friction
Explanation:
As the toy cars rolls away, more friction is created. The more friction there is, the more friction on surface rubs against another which creates friction which in-term slows it down. Hope this helps.
An astronomical unit (A.U.) is 1 point A) a term for defining the luminosity of a star B) the average distance from the Earth to the sun C) the average distance of any given planet to the sun D) equal to a light year
Answer:
B) the average distance from the Earth to the Sun
Explanation:
In an action-reaction pair
a. action force is exerted first
b. action force and the reaction force are equal in magnitude and act in the same direction.
c. action force and the reaction force are contact forces only.
d. action force and the reaction force act on two different objects.
Answer:
d. action force and the reaction force act on two different objects.
Hope you could understand.
If you have any query, feel free to ask.
In an action-reaction pair, action force and the reaction force act on two different objects.
What is Newton's Third Law of Motion?Newton's Third Law of Motion states that "For every action, there is an equal and opposite reaction, action and reaction act on two different bodies."
It means that equal force are act on reaction force that is it is also known as reciprocal law of motion.
When considering the options,
The first option is incorrect because action and reaction forces act simultaneously.The second option is also false because they act in opposite direction.The third option is wrong because for action-reaction force, physical contact is not necessary.So, In an action-reaction pair, action force and the reaction force act on two different objects. Thus, Option B is the correct answer.
Learn more about Newton's third law,
https://brainly.com/question/974124
#SPJ2
8. Placing your vehicle between the pilot/escort vehicle and an oversize/overweight vehicle can be dangerous.A. TrueB. False
Answer:
A because that's the answer
If a 35 kg box collides with a stationary 120 kg box with a force of 90 N, what must
be true of the magnitude of the reaction force?
Answer:
yes , true the magnitude of the reaction force.
A car drives 84 meters forward. It's displacement and distance would be the same?
Answer:
Yes.
Explanation:
Displacement is a vector quantity, meaning it has to be a straight graph jointing from starting point to final point and has a direction as well as magnitude and it can also be negative as well as positive and zero.
Displacement is also changes in position (points) of distance. A distance is scalar quantity meaning it only has magnitude and does not have direction. Since distance is scalar quantity, it cannot be negative. Also graph of distance can be a curve graph or any graph.
So when does displacement equal to distance? If an object is moving in straight path or line in one/fixed direction, both displacement and distance are same.
Because if a distance is a straight path and the displacement is simply a straight line (or ray) jointing from starting point to end point, both distance and displacement are both straight path or rays. Since distance and displacement have same graph, we can conclude that both are same in values.
If we go by calculus, given x = 2t as example of straight graph where x stands for position and t stands for time. We can find the displacement from b to a by using the following formulas:
Displacement
[tex]\displaystyle \large{s=\int\limits^b_a {v} \, dt}[/tex]
Distance
[tex]\displaystyle \large{l=\int\limits^b_a {|v|} \, dt}[/tex]
v stands for velocity which we can find from:
Velocity
[tex]\displaystyle \large{v=\frac{dx}{dt}}[/tex]
If you have learnt calculus, first, differentiate x = 2t with respect to t.
[tex]\displaystyle \large{v=2}[/tex]
Then substitute v = 2 in s and l to find find if both displacement and distance are equal in straight path.
Displacement
[tex]\displaystyle \large{s=\int\limits^b_a {2} \, dt}\\\displaystyle \large{s=[2t]\limits^b_a}\\\displaystyle \large{s=2b-2a = 2(b-a)}[/tex]
Distance
[tex]\displaystyle \large{l=\int\limits^b_a {|2|} \, dt}\\\displaystyle \large{l=\int\limits^b_a {2} \, dt}\\\displaystyle \large{l=[2t]\limits^b_a}\\\displaystyle \large{l=2b-2a=2(b-a)}[/tex]
Since both displacement and distance are equal when integrating on straight graph, we can conclude that an object moving in straight fixed point has same distance and displacement.
These diagrams represent two types of tectonic plate boundaries
Convergent boundaries are caused by the collision of two plates and can originate volcanoes. Transforming boundaries produce fractures by displacement. The correct option is D. Type A boundaries have fewer volcanoes.
----------------------------------------
The crust -the outermost layer of the earth- is divided into many plates that move over the mantle.
These plates are limited by three types of ridges or borders that differ in the movement they produce.
Boundaries types:
I. Divergent:
This boundary occurs when two plates separate and molten material rises from the mantle creating a new crust. The hot material creates a new seabed between the separating plates, expanding the sea bottom.II. Convergent.
Collision area between two plates. Two oceanic plates might collide, or one oceanic plate with a continental one. In this last case, the oceanic crust sinks under the continental plate, and magma rises to the surface by crevices. The thicker and older plate subduces under the other plate. Collisions create volcanic arches and continental arches.
III. Transforming.
The plates slide laterally with each other, and they are usually called faults. It is associated, in general, with the oceanic ridge, although it might also occur in the continental plate. No rocky material is either destroyed or formed. When the plates move and produce a displacement of one transforming limits from side to side, earthquakes occur. The movement breaks the crust and originates pronounced fractures.
In the attached images, we can see
image A representing transforming boundaries, image B representing Convergent boundaries.Image B is the one that can originate volcanoes because transforming boundaries only produce fractures.
So the correct option would be D.
--------------------------------
Learn more about convergent, divergent and transforming boundaries at
https://brainly.com/question/2437823?referrer=searchResults
https://brainly.com/question/2507413?referrer=searchResults
https://brainly.com/question/5082756?referrer=searchResults
https://brainly.com/question/16962517?referrer=searchResults
https://brainly.com/question/16660809?referrer=searchResults
https://brainly.com/question/11162339?referrer=searchResults
https://brainly.com/question/13311455?referrer=searchResults
Answer:
d
Explanation:
Mass can be measured with a triple
beam balance in units of
Resources
A. grams
B. Newtons
C. cubic centimeters
D. millimeters
Answer:
A
Explanation:
i do believe that i need help
An engine has an energy input of 125 J, and 35 J of that energy is transformed into useful energy. What is the efficiency of the engine? 28% 35% 72% 90%.
The efficiency of the engine at the given useful energy and input energy is 28%.
The given parameters:
Input energy of the engine, = 125 JUseful energy of the engine, 35 JThe efficiency of the engine is defined as the ratio of the output energy (useful energy) to the input energy and it is calculated as follows;
[tex]efficiency\ = \frac{0ut put \ energy}{1nput \ energy} \times \ 100\%\\\\efficiency\ = \frac{35}{125} \times 100\%\\\\efficiency\ = 28 \ \%[/tex]
Thus, the efficiency of the engine at the given useful energy and input energy is 28%.
Learn more about efficiency of engine here: https://brainly.com/question/6751595
Answer:
ITS A
Explanation: