Answer:
1/R = 1/R1 + 1/R2 + 1/R3
1/1 + 1/2 + 1/4 = 1 + .5 + .25 = 1.75
1/1.75 = .572
multiplying this by 100 gives us
R = 57.2 ohms
The smallest resistor (100 ohms) will draw the most current
(One can also use R = R1 R2 R3 / (R1 R2 + R1 R3 + R2 R3)
Hi there!
We can use the following equation to solve for equivalent resistance:
[tex]\frac{1}{R_T} = \frac{1}{R_1} + \frac{1}{R_2} + ... + \frac{1}{R_n}[/tex]
We can plug in the givens and solve.
[tex]\frac{1}{R_T} = \frac{1}{100} + \frac{1}{200} + \frac{1}{400} \\\\\frac{1}{R_T} = 0.175\\\\R_T = \frac{1}{0.175} = \boxed{57.143 \Omega}[/tex]
The resistor that would draw the most current is the 100 Ohm resistor because current chooses the path of LEAST RESISTANCE. This can also be proved mathematically with the following:
For resistors in parallel, the POTENTIAL DIFFERENCE (VOLTAGE) is the same.
Since I = V/R, a smaller 'R' means a larger 'I'. Thus, the smallest resistor would have the greatest current through it.
The United States uses only 10% of the world's energy.
True
False
Answer:
False
Explanation:
17%
the answer to your question is false
Calculations a technician performs for the CSP should be located on the O a) standard operating procedure (SOP). b) master formulation record (MFR). O) compounding record (CR). d) quality assurance
The calculations a technician performs for the CSP should be located on the master formulation record (MFR).
What is Master formulation record?
This is a master document which contains all information about the manufacturing process for the product.
This document contains all the calculations required to make the CSP thereby making option B the most appropriate choice.
Read more about Technician here https://brainly.com/question/18428188
Why did the chicken cross the road
Answer:
to get to the other side.
Explanation:
bada bam, bop, BOOM
5 waves with a length of 4m hit the shore every 2 seconds, what is the frequency?
The frequency of the 5 waves with a length of 4m hit the shore every 2 seconds is 2.5 Hz.
What is frequency?This is the number of cycles completed by a wave in one second. The s.i
unit of frequency is Hert (Hz).
From the question, to calculate the frequency of 5 waves with length of 4 m that hit the shores every 2 seconds, we use the formula below.
Formula:
F = n/t........... Equation 1Where:
n = Number of waveF = Frequencyt = timeFrom the question,
Given:
n = 5 waves t = 2 secondsSubstitute these values into equation 1
F = 5/2F = 2.5 Hz.Hence, The frequency of the wave is 2.5 Hz.
Learn more about frequency here: https://brainly.com/question/254161
1. (30 pts) Let x(t) = cos(πt/2) be a continuous-time signal,
a. Sketch the signal for -4
b. Find the fundamental period of the signal (if it is periodic).
c. Determine if the signal is odd / even or neither.
d. Compute the energy of the signal for all time.
e. Compute the power of the signal for all time.
Given that the function of the wave is f(x) = cos(π•t/2), we have;
a. The graph of the function is attached
b. 4 units of time
c. Even
d. 4.935 J/kg
e. 1.234 W/kg
How can the factors of the wave be found?a. Please find attached the graph of the signal created with GeoGebra
b. The period of the signal, T = 2•π/(π/2) = 4
c. The signal is even, given that it is symmetrical about the y-axis
d. The energy of the signal is given by the formula;
[tex] \frac{1}{2} \cdot \mu^{2} \cdot \omega ^{2} \cdot \: {a}^{2} \times \lambda[/tex]
Which gives;
E = 0.5 × 1.571² × 1² × 4 = 4.935 J/kg
e. The power of the wave is given by the formula;
E = 0.5 × 1.571² × 1² × 4 × 0.25 = 1.234 W/kg
Learn more about waves here:
https://brainly.com/question/14015797
A car travels at a speed of 40 m/s for 29.0 s;
what is the distance traveled by the car?
Answer: 1160 m
Explanation:
Speed = distance / time. Therefore, 40 m/s = d / 29 s → d = 1160 m.
1. Greek scientist called Archimedes was asked to check the purity of the gold in a crown. He did this by comparing the density of the crown with the density of pure gold.
a) Describe how he could have measured the density of an irregular shaped object as a crown.
Answer:
Suppose Archimedes weighed the crown (we'll say 2700 grams)
Then he put the crown on a string and weighed the crown in water and found its weight to be 2560 g.
That means that an equivalent volume of water weighed
2700 - 2560 = 140 grams
Then the density of the crown is 2700 / 140 = 19.3
So this is the density of pure gold and the crown could be considered to be made of pure gold with no other metals in its composition.
Archimedes weighed the crown, then suspended it on a rope and measured the volume of water it displaced in order to determine its weight, then he calculated the density of the crown and compared it with the density of the pure gold.
What is density?It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.
As given in the problem statement Greek scientist called Archimedes was asked to check the purity of the gold in a crown. He did this by comparing the density of the crown with the density of pure gold.
Archimedes weighed the crown, then suspended it on a rope and measured the volume of water it displaced in order to determine its weight.
Thus, he could have measured the density of an irregularly shaped object as a crown.
To learn more about density from here, refer to the link;
brainly.com/question/15164682
#SPJ2
Find the temperature
Answer:
-------1
Explanation:
beacuse that is what i know
Water of mass 3 kg at a temperature of 80 ℃ is added to 5 Kg of water at 5 ℃. Calculate the final temperature of the mixture
The final temperature of the mixture is 33.123 °C.
What is temperature?Temperature can be defined as the hotness or coldness of a thing or place.
To calculate the final temperature of the mixture, we use the formula below.
Formula:
Heat gained by the cold water = heat lost by the hot watercm(t₃-t₁) = cm'(t₂-t₃)m((t₃-t₁) = m'(t₂-t₃)......... Equation 1Where:
m = mass of the cold waterm' = mass of the hot watert₁ = Temperature of the cold watert₂ = Temperature of the hot watert₃ = Temperature of the mixture.make t₃ the subject of the equation
t₃ = (mt₁+m't₂)/(m+m')............. Equation 2From the question,
Given:
m = 5 kgm' = 3kgt₁ = 5 °Ct₂ = 80 °CSubstitute these values into equation 2
t₃ = [(5×5)+(3×80)]/(3+5)t₃ = (25+240)/8t₃ = 33.123 °CHence, The final temperature of the mixture is 33.123 °C.
Learn more about temperature here: https://brainly.com/question/24746268
she incorrect? Select all that apply.
because electromagnetic waves can only travel in gases
А
B
because electromagnetic waves can only travel through solids
С
because electromagnetic waves only come from the Sun
D
because electromagnetic waves are not created using force on a medium
m
because electromagnetic waves are created using accelerating charges
F
because electromagnetic waves require a medium to travel
electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.
hope it helps...!!!
If a 40 N block is resting on a rough horizontal table with a
coefficient of static friction p=0.60, then what is the force of
static friction acting on the block?
Based in the relationship between static frictional force and coefficient of static friction, the force of static friction is 24 N.
What is friction?Friction is a force that opposes the relative motion of an object moving over another at their surafce of contact.
Frictional force is constant for each type of material. This constant is known as coefficient of friction.
The coefficient of friction is given as follows:
Coefficient of friction = Frictional force/normal reactionFrom the data given:
coefficient of static friction p = 0.60Weight of block = 40 NForce of static friction = 0.60 × 40
Force of static friction = 24 N.
Therefore, the force of static friction is 24 N.
Learn more about static friction at: https://brainly.com/question/11361910
The ________ of an object is the same on the earth as it is on the moon.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight
Answer:
mass
Explanation:
The mass of an object is the same on the earth as it is on the moon.
Mass always remains constant, it never changes with respect to place.
Topic : Heat
1. Why can anyone put their fingers beside the flame of a lit candle without getting burned, but not above the flame?
2. What is the purpose of putting holes near the top of a metal lampshade?
3. A metal spoon is placed in one of two identical cups of hot coffee. Which cup will be cooler after a few minutes?
An electron has a mass of 9.1x10^-31 kg and a charge
of -1.6x10^-19 C. Suppose you could isolate one electron in
a perfect vacuum and then create an electric field to pull
and edi 107. upward on the electron. How strong would the field have to
be to counteract the electron's weight? (In other words,
di Delfine bu how strong would the field have to be to put the electron in
a state of force equilibrium?)
is one of these the question
Three-Dimensional Thinking
2. Aiden collected canned goods for a neighborhood service project. He
pulled a plastic wagon behind him to put the items in. From the time
Aiden began until he finished collecting, the mass of the wagon tripled.
The walk back to Aiden's house was downhill and the speed of the
wagon tripled. What happened to the kinetic energy when the mass
tripled? What happened to the kinetic energy when the speed tripled?
A
When the speed tripled, the kinetic energy increased by a factor of 3.
B
When the mass tripled, the kinetic energy increased by a factor of 3.
When the mass tripled, the kinetic energy increased by a factor of 3.
When the speed tripled, the kinetic energy increased by a factor of 9.
When the mass tripled, the kinetic energy increased by a factor of 9
When the speed tripled, the kinetic energy increased by a factor of 3.
When the mass tripled, the kinetic energy increased by a factor of 9.
When the speed tripled, the kinetic energy increased by a factor of 9.
с
D
Answer:
A.
Explanation: both triple by 3
Answer: B
Explanation: It is because the formula for this eq is KE=V^2. In the eq, it says that the mass is triple meaning the KE also must have tripled. For the speed, since it has a formula then you just have 3^2 which is 9.
waves disturb a medium by causing the particles to_____.
Answer:
Oscillate
Explanation:
wave oscillates the particles of the medium around their equilibrium point.
Starting from Newton’s Third Law F₁₂ = -F₂₁ derive the Law of Conservation of Momentum for an elastic collision.
From Newton’s Third Law, the Law of Conservation of Momentum for an elastic collision is derived as m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂.
Newton's third lawThis law states that action and reaction are equal and opposite. That is the force applied to an object is equal to the reaction received by the object.
F₁₂ = -F₂₁
m₁a₁ = -m₂a₂
m₁v₁/t = -m₂v₂/t
m₁v₁ = -m₂v₂
m₁v₁ + m₂v₂ = 0
For an elastic collision involving two objectsThe sum of the initial momentum must be equal to sum of final momentum.
let initial velocity = ulet final velocity = vm₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Thus, from Newton’s Third Law, the Law of Conservation of Momentum for an elastic collision is derived as m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
The weight of an object on the moon is less because the _______ on the moon is less.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight
Answer:
acceleration of the gravity
Explanation:
The weight of an object on the moon is less because the acceleration of the gravity on the moon is less.
a 2.99 kg sphere makes a perfectly inelastic collision with a second sphere that is intially at rest. the composite moves with a speed equal to one third the original speed of the 2.99kg. what is the mass of the second sphere?
Answer:
5.98 kg
Explanation:
To solve this problem, let use the Linear Momentum Conservation Law:
Before collision: [tex]\sum p=p_{1}+p_{2}=m_{1}v_{1}+m_{2}v_{2}=(2.99v_{1})+0=2.99v_{1}[/tex]
After collision: [tex]\sum p'=p_{1}'+p_{2}'=(2.99+m_{2})(v_{1}/3)[/tex]
So, we obtain:
[tex]\sum p =\sum p' \rightarrow 2.99v_{1}=(2.99+m_{2})(v_{1}/3) \rightarrow 8.97 = 2.99 + m_{2}[/tex]
[tex]m_{2}=8.97-2.99=5.98 kg[/tex]
The force of an object is equal to its mass times its ______.
A. inertia
B. friction
C. acceleration
D. faster
E. slower
Answer:
C. acceleration
Explanation:
The connection between an object's mass and the amount of force required to accelerate it is described by Newton's second law of motion. F=ma is a common expression for Newton's second law, which states that the force (F) exerted on an object is equal to the mass (m) of the object times its acceleration (a). This indicates that the greater the mass of an item, the more force is required to accelerate it. And the more force there is, the faster the item accelerates.
Which statements accurately describe mechanical waves? Check all that apply.
A. Energy is transferred through vibrating particles.
B. A mechanical wave does not carry energy through matter.
C. A longitudinal wave is a type of mechanical wave.
D. A transverse wave is a type of mechanical wave.
E. An ocean wave moving through water is an example of a mechanical wave.
Answers:
A.
C.
D.
E.
I already did this
Edge 2022
Answer:
A
Explanation:
E. An ocean wave moving through water is an example of a mechanical wave
e.g sound waves wave on a rope or string
and Ans a is also correct
In mechanical waves, the energy is transferred through the vibration of the particles.
Mechanical waves are the type of waves that transfers energy through the vibration of particles. Since, mechanical waves require a medium to transfer energy, they carry energy through matter.
Both longitudinal and transverse waves are two types of mechanical waves.
It is known that mechanical waves propagate through medium like matter, water, etc. Therefore, an ocean wave moving through water is an example of a mechanical wave.
To learn more about mechanical waves, click:
https://brainly.com/question/24459019
#SPJ2
a bulb rated 100 watt 120 volt is connected across a 120 volt source find the current in the bulb and power consumed by it
As it mentioned
100W/120VSo
power is 100W
Now
Current be I
[tex]\\ \rm\rightarrowtail I=\dfrac{P}{V}=\dfrac{100}{120}=\dfrac{5}{6}=0.8A[/tex]
Justina dreamed last night that she was warding off villains in a life or death battle outside a fortified castle. In the dream, she attempted to cross the moat but saw that it was filled with grotesque swamp creatures with warty green skin and she recoiled in fear. Knowing there was only one way to reach safety, she flew over the top of the castle and landed among the weeds in the inner courtyard. She was surprised to run into her seventh period Geometry teacher, Ms. Hargroves, but seeing that her teacher had a spear, compass, and workbook with her, Justina knew they would prevail. Ms. Hargroves told Justina that the key to defeating the villains was to write the theorems from the homework on the castle walls as protection against the invaders. Justina scrambled to write the complicated theorems before the menacing villains closed in. Just when the towering castle walls were about to be sieged, Justina awoke from her dream with a start.
As a therapist who specializes in dreams, who would you interpret Justina’s dream using:
17. Freud’s wish-fulfilling theory:
18. The information-processing theory:
19. The physiological function theory:
20. The activation synthesis theory:
21. The cognitive development theory:
As a therapist who specializes in dreams, I would interpret Justina’s dream by using: 17. Freud’s wish-fulfilling theory.
Who is Sigmund Freud?Sigmund Freud was an Austrian physiologist, neurologist, medical doctor and the founder of psychoanalysis. Also, Freud was born in Moravia on the 6th of May, 1856 and he was famously known around the world for his works on psychoanalytic theory of personality development.
In 1923, Sigmund Freud developed the personality theory through which he strongly argued that a person’s personality (human psyche) is structured into three (3) key parts and these include:
The Id (instincts).Ego (reality).Superego (morality).According to Sigmund Freud, wish fulfillment simply means the satisfaction of a human desire through an involuntary thought process such as dreams. Thus, it typically happens to a person when unconscious desires are adequately repressed by both the ego and superego.
Read more on wish fulfillment here: https://brainly.com/question/13409626
Give at least 2 reasons why the descendants of the Gullah Geechee people in Cool Spring, South Carolina, continue to practice horticulture.
The 2 reasons why the descendants of the Gullah Geechee continued to practice horticulture include the following:
To preserve their cultural heritage.To provide sources for their staple food.What is Horticulture?This is the branch of plant agriculture dealing with garden crops, generally fruits, vegetables, and ornamental plants.
The descendants of the Gullah Geechee were made to work on farms which comprised mostly of rice and cotton. They preserve their culture which is why horticulture is practised.
Read more about Horticulture here https://brainly.com/question/5190102
If the force generated by the car to push it forward is 8,000 N, what can be said about the force opposing the car’s motion?
According to Newton's third law
Ever action has a equal and opposite reaction.So
[tex]\\ \rm\dashrightarrow F_{A}=-F_A[/tex]
Hence if applied force is 8000N opposing force is also 8000NAs car is pushed forward so the opposing force is less than 8000N
Answer:It is less than 8,000 N and greater than zero.
Explanation:
What is the x component of a vector that is defined as
45m at -35°?
the x- component of the vector is 36.86 m.
What is a vector?Vectors are quantities that have both magnitude and direcion
To calculate the x-component of the vector, we use the formula below.
Formula:
dx = dcosθ.......... Equation 1Where;
dx = x-component of the vectord = vector between the x-y componentθ = Angle of the vector to the horizontal.From the question,
Given:
d = 45 mθ = -35°Substitute these values into equation 1
dx = 45cos(-35°)dx = 45×0.918dx = 36.86 m.Hence, the x- component of the vector is 36.86 m.
Learn more about vector here: https://brainly.com/question/25705666
When people are interested in changing their personalities, they are usually most interested in
a.more turbulent less feeling
b.more judging less extroverted
c.more neurotic less assertive
d. More extroverted less neaurotic
When people are interested in changing their personalities, they are usually most interested in more neurotic less assertive.
What is personality?Personality makes up an individual, they are the features or characteristics that forms an individual.
Each individual is made of distinctive character which makes one of different from other.
Therefore, when people are interested in changing their personalities, they are usually most interested in more neurotic less assertive
Learn more on personality here,
https://brainly.com/question/25306997
Define the lower fixed point of thermometer
Answer:
The temperature of pure melting ice at normal atmospheric pressure is known as the lower fixed point of thermometer
The lower fixed point of a thermometer is the temperature of a pure melting ice at atmospheric pressure of 1 atm
What is a thermometer?A thermometer is an instrument used in measuring temperature. iThermometers usually have toe fixed ponts the upper fixed pont and the lower fixed point.
The lower fixed point corresponds to the temperature of a pure melting ice at 1 atm
1 atm is normal atmospheric pressure and equal to 101325 Pa
Environment A is warm and gets lots of rain. Environment B is warmer and gets more rain year round. Identify Environment A.(2 points)
Tundra
Rainforest
Desert
Swamp
Answer:
Swamp
Explanation:
there were answers that said rainforest, but i got it wrong, so its swamp.
What is the absolute error expression of this ?
Answer:
n=(A+B)+k4
Explanation:
because if u add all the things to it u will get that