An object that weighs 75 N is pulled horizontally to the right with a force of 50 N. The force of friction on this object is 30 N to the left. What is the acceleration of the object?
The force on the object is 50 N to the right and 30 N to the left.
⇒ The net force on the object is, =50−30=20 N to the right.
The weight of the object is, =75 N.
⇒ The mass of the object is ==759.8 kg.
⇒ The acceleration of the object is ==20759.8=2.613 m/s 2.
The acceleration of the object is 10 [tex]m/s^2[/tex].
What is Acceleration?Acceleration is defined as the rate of change of velocity of an object with respect to time which are vector quantities i.e. both magnitude and direction. The orientation of an object's acceleration is given by the orientation of the net force acting on that object.
It can be expressed as:
a= v/t
where, a is the acceleration
v is the velocity
t is the time taken
It can also be expressed as F=ma
where, F= force applied
m= mass of the object
So, for above given information
The force on the object is 9N to the right and 30N to the left. The net force on the object is 21N to the left
The mass of the object is 2kg
So, a= 21N/ 2 kg = 10.5 [tex]m/s^2[/tex]
Thus, the acceleration of the object is 10 [tex]m/s^2[/tex].
Learn more about Acceleration, here:
https://brainly.com/question/12550364
#SPJ2
. What material does sound move quicker through?
Water
Air
Steel
Answer:
steel
Explanation:
the close molecules in solids allows sound to travel at a faster speed
Sound will move quicker through Steel than in water and air.
Sound: This can be defined as an audible form of energy, that is radiated outward from a source.
⇒ Generally,
Sound wave travels fastest in solid, more than in liquid or gas. This is because the molecules of solid are more closely together.
⇒ From the question above,
Water is a liquid materialAir is a gaseous materialSteel is a solid materialTherefore, sound will move quicker through Steel than in water and air.
Hence: sound will move quicker through Steel than in water and air.
Learn more about sound here: https://brainly.com/question/1199084
A young man heaves a 6.5 kg rock at a velocity of 6.9 m/s. What is the kinetic energy of the rock?
Answer:
Hope it will help you a lot.
astronauts appear weightless while working in the international space station because
cause there's no gravity therefore they appear weightless
rube goldberg machine steps
Answer:
Rube Goldberg Machine is "a comically involved, complicated invention, laboriously contrived to preform a simple operation." 2. What are the 6 Simple Machines? A. The 6 Simple Machines are: wedge, screw, lever, wheel and axel, inclined plane and pulley.
Two boxes are 8 cm apart. Which of the following should Janet do to decrease the gravitational force between the boxes?
Answer:
the answer is 2.
Explanation:
A coin of mass 0.0050 kg is placed on a horizontal disk at a distance of 0.14 m from the center, as shown above. The coin doesn’t slip and the time it takes for the coin to make a complete revolution is 1.5 s.
A)The figure below shows the disk and coin as viewed from above. Draw and label vectors on the figure below to show instantaneous acceleration and linear velocity vectors for the pin when it is at the position shown below.
B)Determine the linear speed of the coin
C)The rate of rotation of the disk is gradually increased. The coefficient of stats if friction between the coin and the disk is 0.50. Determine the linear speed of the coin when it just begins to slip.
D)If the experiment in part c were repeated with a second, identical coin glued to the top of the first coin, how would this affect the answer to part c? Explain.
A) Figure attached below
B) The linear speed of the coin = 0.59 m/s
C) Linear speed as coin begins to slip = 0.83 m/s
D) The tangential speed will remain the same as seen in part C
Given data :
mass of coin = 0.0050 kg
Distance of coin from the center of disk = 0.14 m
Time to make a complete revolution = 1.5 s
A) Diagram showing the vectors on the figure is attached below
B) Determine the Linear speed of the coinLinear speed of coin = 2 * π * ( 0.14 ) / 1.5
= 0.59 m/s
C) Determine the linear speed of the coin when it just begins to slipgiven that: friction between coin and disk = 0.50
Friction becomes maximum when coin begins to slip
Maximum frictional force (Fmax) = uV
where V = mg
∴ Fmax = u*mg ---- ( 1 )centripetal force = [tex]\frac{mv^{2} }{r}[/tex] ---- ( 2 )Equating equations ( 1 ) and ( 2 ) to determine the linear speed ( v )
v² = u*r*g
∴ v = √(u*r*g ) = √( 0.5 * 0.14 * 9.8 )
= 0.83 m/s
D) If the experiment is repeated with a second coin glued to the top of the first coin the tangential speed will remain the same
Hence we can conclude that The linear speed of the coin = 0.59 m/s Linear speed as coin begins to slip = 0.83 m/s , The tangential speed will remain the same as seen in part C
Learn more about Linear speed : https://brainly.com/question/24713716
A toaster oven indicates that it operates at 1500 W on a 110 V
circuit. What is the resistance of the oven?
[tex]P=U.I => I=\frac{P}{U}=\frac{1500}{110}=\frac{150}{11}<A>\\I=\frac{U}{R}=> R=\frac{U}{I} = \frac{110}{\frac{150}{11} }=8.06< ohm>[/tex]
The answer is: A. 8.06 ohm
ok done. Thank to me :>
A child on a spinning ride at a playground has a centripetal acceleration of 0. 80 m/s2. The child completes a full circle every 4. 2 s. How far from the center of the ride is the child? 0. 068 m 0. 085 m 0. 27 m 0. 36 m.
The distance of the child from the center of the ride is 0.28 m.
The given parameters;
Centripetal acceleration of the child, a = 0.8 m/s²Number of revolution, = 1 rev per 4.2 sThe angular speed of the child is calculated as follows;
[tex]\omega = \frac{1 \ rev}{4.2 \ s} \times \frac{2 \pi \ rad}{1 \ rev} \\\\\omega = 1.5 \ rad/s[/tex]
The radius of the circle is calculated as follows;
[tex]a_c = \omega ^2 r\\\\r = \frac{a_c }{\omega ^2} \\\\r = \frac{0.8}{1.5^2} \\\\r = 0.28 \ m[/tex]
Thus, the distance of the child from the center of the ride is 0.28 m.
Learn more about angular speed here: https://brainly.com/question/6860269
What does electrical energy transform into when used by objects in a home?
Answer:
What can electrical energy be transformed into?
Electrical energy is transformed into many forms - mechanical/kinetic, sound, heat, light, and other forms of electromagnetic radiation - by everyday appliances.
Explanation:
Answer:
none of the other answers could be correct.
Explanation:
The sun nuclear energy transfers to radiant energy A fire Chemical energy transfers to thermal and radiant energy. wind turbine Kinetic motion energy transfers to electrical energy. Lightbulb Electrical energy transfers to radiant and thermal energy. Radio Electrical energy transfers to sound energy.
It requires a 70.4 N force (parallel to the inclined plane) to pull a 5.86 kg box up a 58.1° inclined plane with a rope at a constant speed. (a) What is the coefficient of kinetic friction between the inclined plane and the box?
(b) If the rope were to break, what acceleration would the box experience as it slid down the ramp?
Answer:
0.667; 4.965
Explanation:
Look at the picture I attached for the force analysis.
a) The coefficient=Friction/Normal Force. Because it's at constant speed, the force of friction + mgsin58.1° (because it's on an inclined plane and has split forces) is equal to the applied force (70.4N). Normal force is not equal to weight force though, because the box is on an inclined plane; it's equal to mgcos58.1°.
b) If it were to break, then the box no longer has an applied force, and the direction of friction has changed to up the inclined plane. F=m/a, so acceleration = mgsin58.1°- Friction/mass
If someone can help that would be cool
Answer:
1.5 cm
Explanation:
The ratio of areas is the square of the ratio of diameters, so cylinder A has (1/2)^2 = 1/4 the area of cylinder B.
The volume of the cylinder is jointly proportional to its area and its height. So, for a fixed volume, the height is inversely proportional to the area.
Cylinder B has 4 times the area of cylinder A, so any volume moved from cylinder A to B will require only 1/4 of the change in height that is required in cylinder A.
The red piston in cylinder B rises 1.5 cm.
Write a paragraph explaining how a pressurized garden sprayer works. Make sure todescribe what happens to the air pressure insidethe sprayer as it is pumped by hand.
The principle of operation of a pressurized garden sprayer is as follows;
A pressurized garden sprayer is a chamber which is filled with a liquid which can be a lubricant, paint or chemical, then filled with compressed air to allow the liquid to be sprayed at high pressure.
As it is pumped by hand, the compressed air with which it is filled serves the primary purpose of allowing the liquid to be sprayed at high pressure - an important requirement for performance characteristics of the sprayer.
Flammable liquids must not be used with such equipment.
Read more on pressurized sprayers:
https://brainly.com/question/8842747
Force = 30 N. Mass = 5 kg. Calculate Acceleration
Answer:
Explanation:
from F=ma, 30=5a, a=6
car was moving in a straight road of length 320 km it covered 240 km with an average velocity 75 km/hr then it ran out of fuel and stopped for 0.6 hr until it was refueled and completed its journey with a velocity 100 km/hr so the average velocity during the whole journey
The average velocity of the car for the whole journey is 69.57 km/h.
The given parameters:
Length of the road, L = 320 kmDistance covered = 240 km at 75 km/htime spent refueling, t₂ = 0.6 hrFinal velocity, = 100 km/hrThe time spent by the before refueling is calculated as follows;
[tex]t = \frac{d}{v} \\\\t_1 = \frac{240}{75} \\\\t_1 = 3.2 \ hours[/tex]
The time spent by the car for the remaining journey;
[tex]t_3 = \frac{320 - 240}{100} \\\\t_3 = 0.8 \ hr[/tex]
The total time of the journey is calculated as follows;
[tex]t = t_1 + t_2 + t_3\\\\t = 3.2 \ hr \ + \ 0.6 \ hr \ + \ 0.8 \ hr\\\\t = 4.6 \ hours[/tex]
The average velocity of the car for the whole journey is calculated as follows;
[tex]v = \frac{total \ distance }{total \ time} \\\\v = \frac{320}{4.6} \\\\v = 69.57 \ km/h[/tex]
Learn more about average velocity here: https://brainly.com/question/6504879
scientific notation. jst 11a
Answer:
2 * 10^4
Explanation:
(3 * 10^4)(4 * 10^4) / (6 * 10^4)
= (12 * 10^8)/(6 * 10^4)
= 2 * 10^4
In the fermentation of alcohol, sugars in the liquid are converted to alcohol and bubbles are formed on the surface of the liquids. Which gas forms the bubbles?
Answer:
I believe it is Carbon Dioxide because after yeast breaks down the glucose (sugar) molecule, it forms/creates CO2 and Ethanol. (though it might be Ethanol that creates the bubbles) I am not quite sure if this is correct, but I hope it helps! :,)
Which turn (left or right) requires the truck to slow down more in order to make the turn safely? Explain your answer using appropriate relationships.
On a frictionless surface how much force is necessary to accelerate a 0.49 kg object to the left at 4.8 m/s2?
Answer:
2.35 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
force = 0.49 × 4.8 = 2.352
We have the final answer as
2.35 NHope this helps you
If you walk at an average speed of 5 km/h for 30 minutes, how
far will you walk? (Write your answer with Sl unit.
4) What is the kinetic energy of o 5 kg object moving at a velocity of 25 m/s?
Ek = 1/2 mv^2
= 1/2 × 5 × (25)^2
= 1562.5 J
how many band is the parametric microphone equalizer?
Answer:
3 bands
Explanation:
Basically, the Parametric EQ divides the audio spectrum into three bands, allowing you to enhance (or suppress) the level in that range.
Part A
As an object moves around, on which quantities does the change in its gravitational potential energy depend? Choose all that
apply.
**BRAINLIEST** How does the Combining Vinegar and Baking Soda table represent the law of conservation of matter when baking soda and vinegar are combined?
Basically your liquid will go over the line because you are adding more mass. the balloon will inflate because of mass filling it. Part 1 I noticed that there was a change from the original line. part 2 Some mass is lost. The bubbles are the gas leaving. The balloon increases in size because of the mass. The cup got heavier when I added the vinegar.
Gas leaving caused the bubbles.
Please help if you can!
Answer:
a
Explanation:
bc i said so its right lol
Which statement regarding characteristics of electromagnetic radiation is correct?
Longer wavelengths of light have higher energies.
Lower frequencies of light have higher energies.
Higher frequencies of light have shorter wavelengths.
Shorter wavelengths of light have lower energies.
Answer:
Higher frequencies of light have shorter wavelengths.
You plug your microwave into an outlet and then you heat up a piece of pizza in it. This is an example of an...
Microwave Radiation????????????
A vector consists both?
Answer:
magnitude and a direction
Explanation:
Shown below is a parallel circuit of two light bulbs.
(
Bulb 1
Bulb 2
Which statement best describes what will most likely happen if Bulb 1 burns out?
A. Bulb 2 will also burn out.
B. Bulb 2 will blink off and on.
C. Bulb 2 will stay lit, but will be a dimmer light source.
D. Bulb 2 will stay lit and the light source will be stronger.
NG
The characteristics of parallel circuits allow to find the correct answer for the question about what happens when a light bulb is:
D) Bulb 2 will stay lit and the light source will be stronger.
Electrical circuits have two forms and connection:
• Serie. In this case there is only one path through which current can circulate the current.
• Parallel. There are several roads where the current can circulate.
In a parallel circuit, the total current in the circuit is the sum of the current in each branch, the voltage in all branches remains constant.
Let's analyze the claims:
A) False. The bulbs are independent, what happens to one does not affect the other.
B) False. Both bulbs were on, so the second bulb should not be affected.
C) False. When burn a light bulb, there is more current in the other branch, The opposite happens.
D) True. When burn a light bulb there is more current in the other branch and therefore the light bulb 2 can dissipate more power by shining a little brighter.
In conclusion, using the characteristics of parallel circuits we can find that the correct answer for the question about what happens when a light bulb burns out is:
D) Bulb 2 will stay lit and the light source will be stronger.
Learn more about parallel circuits here: brainly.com/question/23088951
Explain how the stars impact the shape of a galaxy.
Answer:
Galaxies are too far away for astronomers to take real 3D measurements, but we can infer their shape based on the movement of stars. ... This is also true of less common spiral galaxies like the Milky Way. The bulge near the center contains older stars, while the flattened arms are home to younger ones.
Explanation:
The orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.
What is Star?A star is defined as a celestial object consisting of a luminous sphere of plasma held together by self-gravity where the closest star to Earth is the Sun. While many other stars are visible to the uncovered eye at night, their extreme distance from Earth causes them to appear as fixed points of light.
Galaxies are too far away for astronomers to take true 3D measurements, through which we can estimate their size based on the motion of stars, which is also true for less common spiral galaxies like the Milky Way.
Thus, the orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.
Learn more about stars, here:
https://brainly.com/question/29359578
#SPJ6
At the instant a ball is thrown horizontally, an identical ball is dropped from the same height. Which ball hits the ground first? (no air resistance)
Answer:
They go same in the vaccum