a 5-kg shark swimming at 1 m/s swallows an absent-minded 1-kg fish swimming toward it at 4 m/s. the speed of the shark after his meal is

When the light of 258.0 nm strikes the metal surface, each ejected electron has a kinetic energy of 4.80 eV.

To calculate the kinetic energy, we use the formula:

Kinetic Energy (KE) = hc/λ, where h is Planck's constant (6.626×10⁻³⁴ Js), c is the speed of light (2.998x10⁸ m/s) and λ is the wavelength of the light (258.0 nm).

Therefore,

KE = (6.626x10⁻³⁴ Js)(2.998x10⁸ m/s) / (2.58x10^-7 m)

= 7.69x10⁻¹⁹ J = 4.80eV, where (1eV = 1.6 x 10⁻¹⁹ J)


Thus, each ejected electron has a kinetic energy of 4.80 eV or 7.69x10⁻¹⁹ J when the light of 258.0 nm strikes the metal surface.

To know more about kinetic energy, refer here:

https://brainly.com/question/11749818#

#SPJ11

The given statement "Energy is the capacity to do work and work is anything that involves moving matter against an opposing force" is TRUE. Energy is the capacity to do work, which is defined as any action that requires the application of a force to move matter. This includes tasks such as lifting a book, pushing a door open, or running.

Energy refers to the capacity of a physical system to perform work. Energy is generally used to complete tasks, such as moving an object from one location to another, heating up or cooling down a material, or lighting up a room. Work is defined as the transfer of energy to an object via a force applied to the object over a given distance, as per the statement. Work is usually identified as the displacement of an object through a force applied to it in the direction of its displacement against an opposing force.Energy and work are two distinct but interrelated concepts in physics. Energy is the capacity to perform work, and work is the transfer of energy from one object to another through a force acting over a distance. Energy and work are both expressed in joules (J), the unit of energy in the International System of Units (SI).

For more details on energy, click on below link:

https://brainly.com/question/17290830

#SPJ11

The electrostatic force between two protons separated by a distance of 1.0 × 10^-6 m is 2.3 × 10^-8 N.

Electrostatic force is the force between two electrically charged objects. This force can either be attractive or repulsive.

It is proportional to the product of the two charges and inversely proportional to the square of the distance between them.

The force is defined by Coulomb's law which states that:

The electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

The formula for Coulomb's law is given as:F = kq1q2/r2

WhereF is the electrostatic forcek is Coulomb's constantq1 and q2 are the charges of the two particles is the distance between the two particles in meters.

The value of Coulomb's constant is 9.0 × 10^9 Nm^2/C^2.Let's consider two protons separated by a distance of 1.0 × 10^-6 m. The charge on each proton is +1.6 × 10^-19 C.

F = kq1q2/r2F = (9.0 × 10^9 Nm^2/C^2)(+1.6 × 10^-19 C)(+1.6 × 10^-19 C)/(1.0 × 10^-6 m)^2F = 2.3 × 10^-8 N

To know more about electrostatic force refer here:

https://brainly.com/question/9774180#

#SPJ11

The time it takes for the Moon to revolve once around Earth and to rotate once on its axis is known as its period of rotation and revolution, respectively. The time it takes for the Moon to complete one revolution around Earth is approximately 27.3 days or 27 days, 7 hours, and 43 minutes. This period is known as the lunar month or synodic month. During this time, the Moon moves through its phases, from new moon to full moon and back to new moon again.

On the other hand, the time it takes for the Moon to rotate once on its axis is approximately 27.3 days. This means that the Moon takes the same amount of time to rotate on its axis as it does to revolve around Earth. As a result, the same side of the Moon always faces Earth, which is why we only see one side of the Moon from Earth.
It's worth noting that the Moon's period of rotation and revolution are almost the same, which is a rare occurrence in the solar system. This is due to the gravitational influence of Earth, which has caused the Moon to become tidally locked with Earth. This means that the Moon's rotation and revolution are in sync with Earth, resulting in the same side of the Moon always facing Earth.

For such more questions on rotate on its axis:

brainly.com/question/826826

#SPJ11

To determine the capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80[tex]cm^{2}[/tex] and a plate separation of 0.0200 mm, we can use the formula for capacitance: C = εo εr A/d, when the values are plugged in, the capacitance is found to be [tex]1.54* 10^{-9}[/tex] Farads.

The capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80[tex]cm^{2}[/tex] and a plate separation of 0.0200 mm is determined using the formula C = εo A/d, where C is the capacitance, εo is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.

To explain this calculation further, the permittivity of free space is a constant value equal to [tex]8.85 * 10^{-12}[/tex] A/d, which is derived from the equation εo = 1/ (μoc2), where μo is the permeability of free space, and c is the speed of light. The area of the plates is given in the problem statement as 1.80 [tex]cm^{2}[/tex], and the distance between the plates is given as 0.0200 mm.

When these values are plugged into the formula, the capacitance is found to be [tex]1.54* 10^{-9}[/tex]Farads. In conclusion, the capacitance of a teflon-filled parallel-plate capacitor having a plate area of 1.80 [tex]cm^{2}[/tex] and a plate separation of 0.0200 mm is 1.54 x 10-9 Farads.

For more questions related to capacitance.

https://brainly.com/question/28445252

#SPJ11

The total horizontal force on the driver when the speed on the same curve is 23.9 m/s is approximately 570.5 N.

To find the total horizontal force on the driver when the speed on the same curve is 23.9 m/s instead, we can use the concept of centripetal force. The centripetal force Fc is given by the formula: [tex]Fc = (mv^2) / r[/tex], where m is the mass of the driver, v is the speed of the car, and r is the radius of the curve.

First, we need to determine the mass of the driver using the given information:
149 N =[tex](m * (14.0 m/s)^2) / r[/tex]

We can rearrange the equation to find the mass: m =[tex](149 N * r) / (14.0 m/s)^2[/tex]
Now we want to find the centripetal force at the new speed of 23.9 m/s.

We can use the same formula: [tex]Fc_new = (m * (23.9 m/s)^2) / r[/tex]

We can substitute the mass equation we found earlier into this equation:
[tex]Fc_new = ((149 N * r) / (14.0 m/s)^2) * (23.9 m/s)^2 / r[/tex]
The r values cancel each other out, leaving: [tex]Fc_new = 149 N * (23.9 m/s)^2 / (14.0 m/s)^2[/tex]

Now, calculate the new force:
[tex]Fc_new = 149 N * (23.9^2 / 14.0^2) ≈ 570.5 N[/tex]
So, the total horizontal force on the driver when the speed on the same curve is 23.9 m/s is approximately 570.5 N.

To know more about horizontal force, refer here:

https://brainly.com/question/30836538#

#SPJ11

The potential difference between the head and the tail of a displacement vector that points at right angles to a uniform electric field is zero (0).

A uniform electric field refers to the electric field having the same magnitude and direction at all points in space. A uniform electric field is created by two parallel plates that have the same charge density and are close enough to each other that the edges can be ignored. The electric field strength of a uniform electric field is constant, which means that the direction and magnitude are the same at all points in space.

The potential difference between the head and tail of a displacement vector that points at right angles to a uniform electric field is zero (0). It is because the potential difference between two points is equal to the negative of the work done per unit charge in moving a positive test charge from one point to another point. When a displacement vector that points at right angles to a uniform electric field is moved from one point to another, no work is done because the electric field and displacement vector are perpendicular. As a result, the potential difference is zero.

Learn more about magnitude at:

https://brainly.com/question/2596740

#SPJ11

The given statement "turns people upside down" and "people should not drop down" are both due to the centrifugal force.

Centrifugal force is defined as the apparent force that tends to move a rotating body away from the center of rotation. When an object moves in a circular path, a force must act towards the center of the circle to keep it moving in a circle. This force is known as the centripetal force.

The opposite force that acts to push the object away from the center of the circle is called centrifugal force. So, the given statement "turns people upside down" and "people should not drop down" are both due to the centrifugal force.


Learn more about centrifugal force here:

https://brainly.com/question/17167298#

#SPJ11

The magnitude of the magnetic field at a point 58.0 cm from a long, thin conductor carrying a current of 4.70a is: 40.6 T

To calculate the magnitude of the magnetic field at a point 58.0 cm away from a long, thin conductor carrying a current of 4.70 A, we can use the equation B = μ_0*I/(2*pi*r).

[tex]B = 4πx10^-7*4.70/(2*pi*0.58) = 40.6 T.[/tex]

Here, μ_0 is the permeability of free space (4πx10^-7 Tm/A), I is the current (4.70 A), and r is the distance from the conductor (58.0 cm). So, the magnitude of the magnetic field at the point is [tex]B = 4πx10^-7*4.70/(2*pi*0.58) = 40.6 T.[/tex]

To understand why the magnetic field is present, we must look at the conductor carrying a current. When electric current passes through a conductor, it creates a magnetic field around it. This magnetic field is inversely proportional to the distance from the conductor, meaning the closer you get to it, the stronger the magnetic field will be.

Since the conductor in this example has a current of 4.70 A, the magnetic field it creates will be stronger than a conductor with a lower current.

To conclude, the magnitude of the magnetic field at a point 58.0 cm away from a long, thin conductor carrying a current of 4.70 A is 40.6 T. The presence of this magnetic field is due to the electric current passing through the conductor, and it is inversely proportional to the distance from the conductor.

To know more about magnitude refer here:

https://brainly.com/question/14452091#

#SPJ11

The current through the bulb is 2.0 amperes. Then the electric charge that passes through Luighbu is 120 Columbs.

Given that the current through a lightbulb is 2.0 amperes. To find the coulombs of electric charge that pass through the light bulb in one minute, we need to know the formula that relates current, time, and electric charge:

Q = It

Where Q is the electric charge (in coulombs), I is the current (in amperes), and t is the time (in seconds).

To convert one minute to seconds, we multiply it by 60. Hence, the time t = 1 minute × 60 seconds/minute = 60 seconds.

So, the electric charge that passes through the light bulb in one minute is given by

Q = It = 2.0 A × 60 s

Q = 120 C

Therefore, the number of coulombs of electric charge that pass through the light bulb in one minute is 120 C.

Learn more about the electric charge at https://brainly.com/question/25923373

#SPJ11

Repeating the experiment multiple times and averaging the results can help reduce measurement errors and improve accuracy.

Acceleration is a physical quantity that describes the rate at which the velocity of an object changes over time. If an object is moving in a straight line, acceleration can be positive or negative depending on whether the object is speeding up or slowing down. If the object is turning or changing direction, acceleration is not only a change in speed but also a change in direction.

The most common formula to calculate acceleration is [tex]a = (v_f - v_i) / t,[/tex]where "a" is acceleration, "[tex]v_f[/tex]" is the final velocity of the object, "[tex]v_i[/tex]" is the initial velocity of the object, and "t" is the time interval during which the velocity changes.

To learn more about Acceleration visit here:

brainly.com/question/12550364

#SPJ4

In order to hit the monkey with the projectile, you need to Aim higher than the monkey's original position.

Projectile motion is the kind of motion in which an object or body is propelled in the air at an angle to the horizontal plane. The motion is caused by gravity and can be seen in many real-world situations. The path of the projectile is referred to as its trajectory.

The given problem is based on projectile motion. A toy monkey hangs from a hook a certain height above the ground. You fire a projectile at the same instant that the monkey drops and starts falling to the ground. In order to hit the monkey with the projectile, you need to aim higher than the monkey's original position. This is because, as the projectile moves toward the ground, it will fall under the influence of gravity. Hence, the projectile needs to be aimed at a higher point than the monkey's initial position.

Learn more about projectile at https://brainly.com/question/8104921

#SPJ11

The light is brighter in a battery-powered torch, you should change the wattage or power rating of the bulb. A higher-wattage bulb will produce more light and therefore be brighter. When selecting a new bulb for the torch, make sure to choose a bulb with a higher wattage rating than the current bulb.

A battery is an electrochemical device that converts chemical energy into electrical energy through a chemical reaction. It consists of one or more electrochemical cells, each of which contains a positive electrode (cathode), a negative electrode (anode), and an electrolyte that allows ions to move between the two electrodes.

During the discharge process, a chemical reaction takes place within the battery that causes electrons to flow from the negative electrode through an external circuit to the positive electrode, generating an electrical current. This current can then be used to power a wide range of electrical devices, such as flashlights, smartphones, and cars. The chemical reaction can be reversed by recharging the battery, which involves applying an external electrical current to the electrodes to force the reaction to occur in the opposite direction.

To know more about Battery visit here:

brainly.com/question/19225854

#SPJ4

Light is a form of energy. All the properties of light can be explained by Considering the Wave length and lespuscutar theory.

The Wave Theory states that waves are how light moves across space. When Visible light  is passed through a prim it is split up into seven colours which corresponds to definite wave length. a phenomenon Called dispersion. The study of interaction between matter and electromagnetic radiation  is defined as spectroscopy.

A spectrophotometer is a device which detect the percentage transmittance of light radiation. When light of certain intensity and frequency range is passed through the Sample Thus the instrument Compare the intensity of the transmitted light with that of the incident light.

A spectroscope is a device that divides light into its individual wavelengths to produce a spectrum.

Learn more about Light here:

https://brainly.com/question/7439081

#SPJ1

v_max = √(2kq1q2 / (md))

To determine the speed of the protons when they reach their original separation after being released from rest at the closer distance, we can use the principle of conservation of mechanical energy.

According to the given problem, the protons are initially at rest at a closer distance. This means they have zero initial kinetic energy (KE) and only potential energy (PE) due to their separation.

As they move towards each other under the influence of electrostatic force, their potential energy is converted into kinetic energy.

At the original separation, the protons would have reached their maximum kinetic energy, as all of the potential energy would have been converted into kinetic energy. Let's denote this maximum kinetic energy as KE_max.

The total mechanical energy (E) of the protons, which is the sum of their kinetic energy and potential energy, remains constant throughout their motion. So we have:

E = KE + PE

At the original separation, KE = KE_max and PE = 0, as the protons have zero potential energy at that point.

So we can write:

E = KE_max + 0

E = KE_max

Now, let's denote the speed of the protons at the original separation as v_max. We can use the formula for kinetic energy:

KE = 1/2 mv^2

where m is the mass of the proton and v is its speed. Substituting KE_max for E and v_max for v, we have:

KE_max = 1/2 m v_max^2

Since the protons have no initial kinetic energy, their total mechanical energy E is equal to their initial potential energy PE, which is given by the equation:

PE = kq1q2 / d

where k is the electrostatic constant, q1 and q2 are the charges of the protons, and d is their initial separation (closer distance in part a).

Now, if we equate the expressions for KE_max and PE, we get:

1/2 m v_max^2 = kq1q2 / d

Solving for v_max, we have:

v_max = √(2kq1q2 / (md))

where √ denotes the square root.

So, to find the speed of the protons when they reach their original separation, you would need to know the values of the electrostatic constant (k), the charges of the protons (q1 and q2), the mass of the proton (m), and the initial separation (d), and then plug these values into the equation above to calculate v_max.

To learn more about kinetic energy, refer below:

https://brainly.com/question/26472013

#SPJ11

In order to move the fridge to the left, Dave would have to push with a force of at least 210 N to the left, in the opposite direction of the force that John is pushing in. This is because the two forces (John's pushing to the right and Dave's pushing to the left) must be of equal magnitude and opposite direction in order for the fridge to move in the desired direction.

The magnitude of Dave's pushing force must be equal to or greater than John's, which is 210 N. This is because forces in opposite directions cancel each other out; therefore, the net force acting on the fridge must be equal to or greater than the magnitude of John's pushing force, 210 N.

In order for the fridge to start moving initially, Dave's pushing force must be greater than zero. This is because for the fridge to begin to move, the net force acting on the fridge must be greater than zero. A pushing force of 210 N to the left by Dave is the minimum force required to make the fridge start moving to the left.

for such more question on force

https://brainly.com/question/12785175

#SPJ11

The force between the asteroid and the spacecraft will be 40 N when the spacecraft moves to a position three times as far from the center of the asteroid.

The gravitational force between two objects of masses m1 and m2 separated by a distance r is given by the formula:

F = G(m₁m₂) / r²

where G is the gravitational constant.

In this problem, the asteroid exerts a gravitational force of 360 N on the spacecraft when they are at a certain distance r from each other. When the spacecraft moves to a position three times as far from the center of the asteroid, its distance from the asteroid will be 3r. To calculate the new force between them, we can use the same formula and plug in the new distance:

F' = G(m1m2) / (3r)^2

F' = G(m1m2) / 9r^2

Since the masses of the asteroid and spacecraft are constant, we can divide the second equation by the first to find the ratio of the new force to the original force:

F' / F = (G(m₁m₂) / r²) / 9r²) / (G(m₁m₂) / r²)

F' / F = (1 / 9)

F' = (1 / 9) * F

F' = (1 / 9) * 360 N

F' = 40 N

Therefore, the force will be 40 N.

Learn more about The Force: https://brainly.com/question/30526425

#SPJ11

The time at which the centripetal and tangential accelerations of a point on the rim have the same magnitude is given by t = √(R/α).

A tangential = R, where R is the wheel's radius and is the angular acceleration, gives the tangential acceleration of a point on the rim of the wheel.

A centripetal =  v²/R, where v is the speed of the point, gives the centripetal acceleration of a point on the rim of the wheel.

At time t, the wheel's angular displacement is given by  = (1/2)t2, and the speed of the point on the rim is given by v = R, where is the wheel's angular velocity.

Setting the magnitudes of the tangential and centripetal accelerations equal, we have:

Rα = v²/R

Substituting v = Rω and simplifying, we get:

Rα = Rω²

α = ω²

Using the definition of angular velocity ω = αt, we get:

t = √(R/α)

Therefore, the time at which the centripetal and tangential accelerations of a point on the rim have the same magnitude is given by t = √(R/α).

learn more about acceleration here

https://brainly.com/question/26408808

#SPJ1

The speed of sound in air is approximately the same for all wavelengths.

Step by step Explanation :

The evidence that this is true is the following:

The speed of sound in air is approximately the same for all wavelengths. This is proved by the fact that a sound wave is an atmospheric disturbance that propagates as a longitudinal wave through the air, travelling as a pressure wave that causes areas of compression and rarefaction.

The speed of sound in air is constant and is determined by the average kinetic energy of the air molecules. This is why the speed of sound is the same for all wavelengths.

When the temperature of air is held constant, the speed of sound in air is constant. This is the primary reason why the speed of sound in air is practically constant at a given temperature.

The wavelengths of sound range from about 17 meters for the lowest audible frequency (about 20 Hz) to about 17 millimeters for the highest audible frequency (about 20,000 Hz).

The speed of sound in dry air at room temperature is around 343 meters per second, but it may vary depending on a variety of factors, including humidity, temperature, and pressure.

Learn more about Speed, Sound, Wavelengths at https://brainly.com/question/16396485

#SPJ11

Assuming that it does not slip, the acceleration of the seed is 0.89 m/s².

The acceleration of the seed can be calculated using the formula for centripetal acceleration:

a = (v²) / r

where a is the centripetal acceleration, v is the velocity of the seed, and r is the distance from the axis of rotation to the seed.

To use this formula, we need to first convert the rotational speed of the turntable from rev/min to radians per second. There are 2π radians in one revolution, so:

ω = (33 1/3 rev/min)(2π rad/rev)(1 min/60 s) = 3.49 rad/s

The velocity of the seed can be calculated from the tangential velocity formula:

v = rω

where v is the tangential velocity of the seed.

Substituting the given values, we get:

v = (0.073 m)(3.49 rad/s) = 0.255 m/s

Now we can use the formula for centripetal acceleration:

a = (v²) / r

Substituting the values we have calculated, we get:

a = (0.255 m/s)² / 0.073 m = 0.89 m/s²

Therefore, the acceleration of the seed is 0.89 m/s² assuming that it does not slip.

Learn more about centripetal acceleration here: https://brainly.com/question/79801.

#SPJ11

If the car rounds an unbanked curve of radius 80 m and the coefficient of static friction between the road and car is 0.8, then the maximum speed at which the car traverses the curve without slipping is V =  25.05 m/s.

The maximum speed at which the car traverses the curve without slipping can be determined using the following formula:

[tex]v = \sqrt{(\mu rg)}[/tex]

Where:

v = maximum speed

μ = coefficient of static friction

r = radius of curvature

g = acceleration due to gravity

Substituting the given values into the formula:

[tex]v = \sqrt {(\mu rg)}[/tex]

[tex]v = \sqrt{(0.8 \times 80 \times 9.81)}[/tex]

v = 25.05 m/s

Therefore, the maximum speed at which the car can traverse the curve without slipping is 25.05 m/s.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11

The solid sphere should be released from a height of 0.225 m on the incline to have the same speed as the solid cylinder at the bottom of the hill.

To solve the problem, we need to use conservation of energy, which states that the total energy of a closed system remains constant. At the top of the incline, the cylinder and sphere both have potential energy, which is converted to kinetic energy as they roll down the incline.

Since the two objects have the same mass, we only need to consider their different moments of inertia.

The potential energy at the top of the incline is equal to mgh, where m is the mass, g is the acceleration due to gravity, and h is the height of the incline. At the bottom of the incline, the potential energy is converted to kinetic energy, which is equal to (1/2)mv^2, where v is the velocity.

For the solid cylinder, the moment of inertia is (1/2)mr^2, where r is the radius. For the solid sphere, the moment of inertia is (2/5)mr^2.

Since the two objects have the same kinetic energy at the bottom of the incline, we can set their potential energies equal to each other, and solve for the height of the incline for the sphere:

mgh_cylinder = (1/2)mv_cylinder^2

mgh_sphere = (1/2)mv_sphere^2

mgh_cylinder = mgh_sphere

(1/2)mv_cylinder^2 = (1/2)mv_sphere^2

v_cylinder^2 = v_sphere^2

(1/2)mv_cylinder^2 = (1/2)mv_sphere^2

(1/2)mr_cylinder^2(v_sphere^2/r_cylinder^2) = (1/2)(2/5)mr_sphere^2(v_sphere^2/r_sphere^2)

v_sphere^2 = (5/2)(r_cylinder^2/r_sphere^2)v_cylinder^2

h_sphere = (v_sphere^2/2g)

= (5/4)(r_cylinder^2/r_sphere^2)h_cylinder

= (5/4)(1/2)^2(0.72 m)

= 0.225 m

Therefore, the solid sphere should be released from a height of 0.225 m on the incline to have the same speed as the solid cylinder at the bottom of the hill.

For more questions like Sphere click the link below:

https://brainly.com/question/14762844

#SPJ11

The Blumlein technique should be avoided when using directional microphones due to probable phase cancellation problems caused by its bidirectional microphones.

Sound system amplifier methods are utilized to catch sound system sound in recording and broadcasting applications. While utilizing directional mouthpieces, like cardioid or supercardioid receivers, stage scratch-off issues can happen because of the directionality of the amplifiers.The Blumlein strategy, which utilizes two bidirectional receivers organized in an incidental pair, ought to be stayed away from while utilizing directional mouthpieces. This is on the grounds that the bidirectional mouthpieces utilized in the Blumlein strategy have invalid focuses at 90 degrees to the front and back of the receiver, which can prompt stage scratch-off when utilized related to directional amplifiers.All things being equal, sound system receiver strategies that utilization omnidirectional mouthpieces, like the separated pair method or the A-B strategy, are more reasonable for use with directional amplifiers.

To learn more about stereo microphone technique, refer:

https://brainly.com/question/12484674

The sound that you hear has a higher frequency and a shorter wavelength.

When you move towards a stationary source of sound waves, the wavelength is shortened and the frequency is increased. This is due to the Doppler Effect, which states that a wave's frequency increases as the source and observer come closer together.

The Doppler effect is a phenomenon when there is a change in the frequency of the wave due to a displacement of the source and detector/listener.

In summary, when you move towards a stationary source of sound waves, the sound you hear has a higher frequency and a shorter wavelength.

Learn more about Doppler Effect at https://brainly.com/question/1330077

#SPJ11

The time it takes for the potential difference across the capacitor to decrease to 5.0 V is 0.035 seconds.

In RC circuits, R represents the resistor, and C represents the capacitor.

A capacitor is a device that stores electric charge, whereas a resistor is a device that resists electric current.

The formula for charging and discharging a capacitor is:

V = V0 (1-e^(-t/RC)),

where V0 is the voltage at the capacitor's beginning, V is the voltage at time t, R is the resistor, and C is the capacitor's capacitance.

To determine the time required for the potential difference across the capacitor to decrease to 5.0 V, the formula for the time constant is

RC.t = RC ln (V0/V)

To calculate the time constant, we need to know the resistance, capacitance, and initial voltage of the capacitor. Let us assume the following values:

C = 50 x 10^-6 F = 5.0 V

The capacitance of the capacitor is 50 x 10^-6 F, and the voltage across the capacitor is 5.0 V.

Substitute the values into the formula:

T = RC ln (V0/V) = 1000 Ω * 50 x 10^-6 F ln (10 V / 5 V) = 0.035 seconds.

Therefore, the time it takes for the potential difference across the capacitor to decrease to 5.0 V is 0.035 seconds.

To know more about capacitor click here:

https://brainly.com/question/17176550

#SPJ11

The diver's acceleration is 2.67 m/s^2.

We can use the formula for acceleration:

a = (vf - vi) / t

where a is acceleration, vf is final velocity, vi is initial velocity, and t is time.

In this problem, the initial velocity (vi) is 2 m/s downward, the final velocity (vf) is 6 m/s downward, and the time (t) is 1.5 seconds.

Plugging in these values, we get:

a = (6 m/s - 2 m/s) / 1.5 s

a = 4 m/s / 1.5 s

a = 2.67 m/s^2

As a result, the acceleration of the diver is 2.67 m/s^2.

Learn more about diver's acceleration at: https://brainly.com/question/25094023

#SPJ11

Errors due to earth curvature and refraction can be eliminated from the differential leveling process by using the trigonometric leveling method.

This method utilizes the principle of triangles to determine the height difference between two points on the Earth's surface.

The trigonometric method begins by measuring the horizontal angle between two points, then the vertical angle between the same two points, and finally the distance between the points.

The trigonometric method is not affected by the curvature of the Earth or refraction since the vertical angle is measured at a given distance instead of the line of sight.

Therefore, the measurements of the angles and distances remain unaffected.

The trigonometric leveling process is as follows: first, an instrument is set up at point A. A second instrument is then set up at point B, and both instruments are leveled.

The horizontal angle between the two points is then measured with a theodolite, followed by the vertical angle. Lastly, the distance between the two points is measured using a tape measure.

After all the measurements are taken, the results are then used in a trigonometric formula to calculate the difference in elevation between the two points.

This method eliminates errors due to refraction or the Earth's curvature, since the elevation difference is not determined by the line of sight, but rather by the measured angles and distance.

The trigonometric leveling method is the best method to eliminate errors due to the Earth's curvature and refraction from the differential leveling process.

This method uses trigonometric principles and measurements to accurately calculate the difference in elevation between two points.

to know more about refraction refer here:

https://brainly.com/question/14760207#

#SPJ11

The statement that is supported by the data is that both of the crates are accelerating at the same rate. That is option C.

Acceleration is defined as the quantity that measures the rate of change of velocity of a moving object.

According to Newton's second law, the force (F) acting on an object is equal to the mass (m) of object times its acceleration (a).

That is F = ma

For the first crate = a = 686/70 = 9.8 m/s²

Fro the second crate = 490/50 = 9.8 m/s²

Therefore, Both of the crates are accelerating at the same rate.

Learn more about mass here:

https://brainly.com/question/28409714

#SPJ1

The peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is approximately 9.7 micrometers and the type of electromagnetic wave is infrared radiation. Infrared radiation is part of the electromagnetic spectrum and is often referred to as the "heat" radiation because it is emitted by objects that are slightly warmer than room temperature.

The wavelength of infrared radiation is typically in the range of 0.75 micrometers to 1000 micrometers. The peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is the longest wavelength of radiation emitted by the body.

In order to determine the peak wavelength, the Stefan-Boltzmann Law must be applied. This law states that the total amount of energy emitted by a blackbody per unit area is proportional to the fourth power of its absolute temperature. By rearranging the equation, we can calculate the peak wavelength, which is then equal to 2.89 * 10^-3 m * (T^-1/4). Since the temperature is 310 K, the peak wavelength of the blackbody radiation curve for the human body (t5 310 K) is approximately 9.7 micrometers.

The type of electromagnetic wave emitted by the human body at a temperature of 310 K is infrared radiation. Infrared radiation is part of the electromagnetic spectrum and has a wavelength in the range of 0.75 micrometers to 1000 micrometers. Infrared radiation is often referred to as the "heat" radiation because it is emitted by objects that are slightly warmer than room temperature.

for such more question on wavelength

https://brainly.com/question/10728818

#SPJ11

The reason distance has a greater effect on the force of gravity between our Earth and Moon is because the distance between them is relatively large.

The reason distance has a greater effect on the force of gravity between the Earth and the Moon is because the force of gravity between two objects decreases with the square of the distance between them. This is known as the inverse square law of gravity.

The force of gravity between two objects is proportional to the product of their masses, and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as,

F = G * (m1 * m2) / r^2

where F is the force of gravity, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between them.

In the case of the Earth and the Moon, their masses are fixed, so the only variable that affects the force of gravity between them is the distance. As the distance between the Earth and the Moon increases, the force of gravity between them decreases rapidly, according to the inverse square law.

To know more about moon, here

brainly.com/question/2337043

#SPJ4

--The complete question is, Fill in the blank, the reason distance has a greater effect on the force of gravity between our earth and moon is because the distance between them is ________________.--