A 52 V battery powers a pair of 36 resistance resistors connected in series. What is the current flowing through the system?

Answers

Answer 1

Answer:

Total Voltage V=36*2Ω = 72Ω

We can use the formula V=IR

V=voltage

I=current

R=resistance

V=IR

I= 52/72

I=13/18

I=0.722A

Related Questions

voyager 1 is a space probe launched by nasa in 1977 and is the farthest human-made object. it experiences negligible gravity. voyager 1 is propelled by thrusters but will run out of fuel by 2040. what will happen to voyager 1 after this date?multiple select question.the velocity of voyager 1 will remain unchanged.voyager 1 will slow down from the velocity it will have when the fuel runs out.voyager 1 will immediately stop.voyager 1 will continue moving with the speed it will have when the fuel runs out.

Answers

Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.

Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.

Learn more about Voyager 1

https://brainly.com/question/3412409

#SPJ4

in a(n) ____ joint the edges of the metal meet so that the thickness of the joint is approximately equal to the thickness of the metal.

Answers

In a butt joint, the edges of the metal meet so that the thickness of the joint is approximately equal to the thickness of the metal.

In a butt joint, the edges of the metal pieces are placed together so that they are flush with one another, with little or no overlap. This results in a joint where the thickness of the joint is approximately equal to the thickness of the metal being joined. Butt joints are commonly used in welding and metal fabrication, as they provide a clean, simple joint that can be easily welded or brazed together. However, they may not be as strong as other types of joints, such as lap joints or T-joints, which provide more surface area for welding or brazing.

To learn more about metals, refer:-

https://brainly.com/question/28650063

#SPJ11

In welding, a joint refers to the area where two pieces of metal are joined together. There are several types of joints used in welding, including butt joints.

A butt joint is formed when two pieces of metal are placed together, edge to edge, and welded.

The joint is formed so that the thickness of the joint is approximately equal to the thickness of the metal being joined.

The process of making a butt joint involves

1) first preparing the edges of the metal.

2) This may involve grinding or filing to ensure that the edges are clean and straight.

3) The two pieces of metal are then brought together, with their edges touching, and held in place using clamps or other devices.

4) Once the pieces are in place, a welding machine is used to fuse the metal together.

The welding process may involve the use of heat or pressure, or a combination of both, depending on the type of welding being used.

The resulting joint is strong and durable, and is often used in a variety of applications where a strong, seamless joint is needed.

Butt joints are commonly used in the construction of buildings, bridges, and other structures, as well as in the manufacturing of machinery and equipment.

To know more about  butt joint visit link :

https://brainly.com/question/31733313

#SPJ11

once ejected, how long does it take the electrons with maximum kinetic energy to travel 2.34 cm to a detection device, in seconds? you may assume these electrons travel in a collisionless manner.

Answers

It takes approximately 3.95 x 10⁻¹⁰ seconds for the electrons with maximum kinetic energy to travel 2.34 cm to a detection device.

To determine the time it takes for the electrons with maximum kinetic energy to travel 2.34 cm to a detection device, we need to use the equation:
time = distance / velocity

The velocity of the electrons can be calculated using the equation for kinetic energy:
KE = 0.5mv²
where KE is the kinetic energy, m is the mass of the electron, and v is the velocity.

Since we are assuming that the electrons are traveling in a collisionless manner, we can assume that they are traveling at a constant velocity.

Therefore, we can use the maximum kinetic energy of the electrons to calculate their velocity.

The maximum kinetic energy of the electrons is given by:
KE = eV
where e is the charge of an electron and V is the voltage applied to the electron gun.

Assuming a voltage of 10 kV, the maximum kinetic energy of the electrons is:
KE = (1.6 x 10⁻¹⁹ C) x (10,000 V) = 1.6 x 10⁻¹⁵ J

Using this value for KE and the mass of an electron (9.11 x 10⁻³¹ kg), we can calculate the velocity of the electrons:
1.6 x 10⁻¹⁵ J = 0.5 x (9.11 x 10⁻³¹ kg) x v²

v = 5.93 x 10⁷ m/s

Now we can calculate the time it takes for the electrons to travel 2.34 cm:
time = 0.0234 m / 5.93 x 10⁷ m/s = 3.95 x 10⁻¹⁰ s

Learn more about electrons:

https://brainly.com/question/860094

#SPJ11

if the mediterranean sea is 2520 km at most between europe and africa, and it is closing at a rate of 4.87 cm per year; how many years until the mediterranean no longer exists on the planet?

Answers

The time needed for the Mediterranean to no longer exist on the planet is approximately 51,745,380 years. The result is obtained by using the formula for speed.

Speed and Time

To calculate the number of years until the Mediterranean no longer exists on the planet, we need to use the formula:
Time = Distance/Speed

In this case, the distance is 2,520 km and the speed of closing to each other is 4.87 cm per year. We need to convert the units of distance and speed to be consistent.

Distance = 2,520 km

Distance = 2,520 × 1,000 meters

Distance = 2,520,000 meters

Speed = 4.87 cm per year

Speed = 4.87 ÷ 100 meters per year

Speed = 0.0487 meters per year

Plugging these values into the formula, we get:

Time = 2,520,000/0.0487

Time = 51,745,379.87 years

Time ≈ 51,745,380 years

Hence, it will take approximately 5,178,695 years until the Mediterranean no longer exists on the planet, assuming that the current rate of closure remains constant.

Learn more about speed here:

brainly.com/question/30506212

#SPJ11

another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:

Answers

The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.

When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:

[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]

Where C1, C2, ..., Cn are the capacitances of the individual capacitors.

Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.

Learn more about circuit's capacitance.

https://brainly.com/question/28884207

#SPJ4

you and two friends apply force of 400 N to push a piano up a 4.0 m long ramp. How much work in joules has been done when you reach the top of the ramp

Answers

Answer: Work = Force x Distance Work = 400 N x 4.0 m Work = 1600 J

Explanation:

The work done is equal to the force applied multiplied by the distance moved in the direction of the force. In this case, the force applied is 400 N and the distance moved in the direction of the force is 4.0 m. Therefore, the work done is:

Work = Force x Distance Work = 400 N x 4.0 m Work = 1600 J

So, when you reach the top of the ramp, you have done 1600 J of work.

1. Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice.


Now consider a patient who is told to keep hot compresses on an eye infection for 10 minutes. She discovers that her compress is no longer hot after only 5 minutes and therefore wants to keep it warm twice as long. Is the better strategy to use more hot water to keep it warm longer, or use the same amount of water as before, but just make the water hotter?


2. The desert sand is very hot during the day and very cold at night. What does this tell you about its specific heat capacity?


3. James Joule used a spinning set of paddles to heat the water in which they were placed, and by comparing the mechanical energy he put in, and temperature rise of the liquid afterwards, he determined the interconversion between mechanical and thermal energy. Inspired by Joule's experiment, you decide to heat your bath water by pushing your hand through it in circles. Estimate the total distance your hand will have travelled to raise the water temperature by 10°C in a typical bathtub. You may assume your hand exerts a continuous force of 50 N.


4. When cooking frozen cheese ravioli, the directions say to put the 255 grams of cheese-filled pasta into 3 quarts of boiling water. We want to explore, by calculations, why you are told to use 3 quarts when it's obvious that 1 quart would easily cover them all, and get dinner cooked even faster?


Suppose the ravioli are in the freezer at - 40 °C. You may consider the ravioli to have a specific heat of 0. 4 cal/gam-°C, both when frozen and when in water.

(A) By how much does the temperature of the 3 quarts of water drop when you add the frozen ravioli?


(B) How much would the water temperature drop if you used only 1 quart?


(C) So what is the answer? Why do they ask for 3 quarts?


5. The energy of a thunderstorm results from the condensation of water vapor in humid air. Suppose a thunderstorm could condense all the water vapor in 10 km3 of air.


How much heat does this release?

(You may assume each cubic meter of air contains 0. 017 kg of water vapor. )


How does this compare to an atomic bomb which releases an energy of 2 x 1010 kcal?

Answers

The given Statement "Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice."   is True . Because, When an injury like black eye occurs, blood vessels in affected area can become damaged and leak blood, causing swelling and inflammation.

Applying ice to area can help to constrict blood vessels, slowing down the flow of blood and reducing amount of blood that accumulates in affected area. This can help to reduce swelling and inflammation, as well as alleviate pain and discomfort.  Heat can cause blood vessels to dilate which can increase blood flow and promote healing in some cases.

To know more about blood flow, here

brainly.com/question/14781793

#SPJ4

--The complete Question is, ''Heat opens capillaries and improves blood flow. The reverse is true too: cold capillaries close. Thus, for a black eye where you want to prevent blood buildup causing painful swelling, you use ice. ''

State True or False'-

a radio station broadcasts on the frequency of 102.3 mhz. a. what is the wavelength of this broadcast? b. what is the photon energy of this radiation?

Answers

The wavelength of the radio broadcast is 2.93 meters. The photon energy of the radio broadcast is 6.79 x  [tex]10^{26}[/tex] joules.

The wavelength of the radio broadcast can be calculated using the formula:

wavelength = speed of light / frequency

The speed of light in a vacuum is approximately 3.00 x [tex]10^8[/tex] meters per second. We need to convert the frequency from megahertz (MHz) to hertz (Hz):

102.3 MHz = 102.3 x [tex]10^6[/tex] Hz

Plugging in the values, we get:

wavelength = (3.00 x [tex]10^8[/tex]m/s) / (102.3 x [tex]10^6[/tex] Hz)

wavelength = 2.93 meters

Therefore, the wavelength of the radio broadcast is 2.93 meters.

b. The photon energy of the radio broadcast can be calculated using the formula:

energy = Planck's constant x frequency

Planck's constant is approximately 6.63 x [tex]10^{34}[/tex] joule-seconds. Again, we need to convert the frequency from megahertz to hertz:

102.3 MHz = 102.3 x [tex]10^6[/tex] Hz

Plugging in the values, we get:

energy = (6.63 x [tex]10^{34}[/tex] J·s) x (102.3 x [tex]10^6[/tex] Hz)

energy = 6.79 x [tex]10^{26}[/tex] joules

Therefore, the photon energy of the radio broadcast is 6.79 x [tex]10^{26}[/tex]joules.

Learn more about photon energy ,

https://brainly.com/question/2393994

#SPJ4

3. When the procedure is repeated with a third line how will it distinguish whether the location of the center of gravity is accurate or not?​

Answers

If the procedure is repeated with a third line, it will distinguish whether the location of the center of gravity is accurate or not by checking if the intersection point of the three lines passes through the same point as the previous two lines.

This is because the intersection of the third line with the other two lines should also pass through the same point as the previous two lines if the location of the center of gravity is accurate. If the intersection point of the third line is not consistent with the previous two, then it suggests that the location of the center of gravity is not accurate.

To know more about intersection point , here

brainly.com/question/14217061

#SPJ4

the first three standing waves patterns for a spring fixed at both ends is shown in the figure. if the frequency of the middle pattern is 72 hz, what is the exact frequency (in hz) of the first (top) pattern? do not include units with the answer.

Answers

The exact frequency of the first pattern is 12 Hz.

A standing wave on a spring fixed at both ends can be visualized as a series of oscillations where nodes, or points of no displacement, alternate with antinodes, or points of maximum displacement. The frequency of the standing wave is determined by the speed of the wave, which is dependent on the properties of the medium (in this case, the spring) and the distance between nodes.

The fundamental frequency (first harmonic) is twice the frequency of the second harmonic, which in turn is three times the frequency of the third harmonic. Thus:

f_3 = 72 Hz

f_2 = (1/3) f_3 = 24 Hz

f_1 = (1/2) f_2 = 12 Hz

Therefore, the exact frequency of the first pattern is 12 Hz.

Learn more about frequency

https://brainly.com/question/5102661

#SPJ4

if one-third of this energy goes into heat and other forms of internal energy of the motor, with the rest going to the motor output, how much torque will this engine develop if you run it at 2400 rpm ?

Answers

The engine will develop a torque of 475.47 N·m when run at 2400 rpm.

The torque developed by an engine can be calculated using the formula:

Torque = Power / (2π × RPM / 60)

where power is the net power output of the engine and RPM is the speed of the engine in revolutions per minute.

Given that the engine produces 75 kW of power, one-third of which goes into heat and other forms of internal energy, the net power output would be:

Net power = 75 kW × (1 - 1/3) = 50 kW

Converting the engine speed of 2400 rpm to radians per second gives:

ω = 2400 rpm × (2π / 60) = 251.33 rad/s

Substituting the values into the torque formula:

Torque = 50,000 W / (2π × 251.33 / 60) = 475.47 N·m

Learn more about internal energy, https://brainly.com/question/14668303

#SPJ4

seamus made an electromagnet from an iron nail, a piece of copper wire with three coils spread out across the nail, and a aaa-sized battery. he's magnet attracts only one paper clip, and he wants to boost the power of his magnet to attract at least four paper clips. what two things can seamus do to accomplish his goal? responses seamus can add batteries to decrease the voltage, and he can increase the space between the wire coils. seamus can add batteries to decrease the voltage, and he can increase the space between the wire coils. seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. seamus can add batteries to decrease the voltage, and he can decrease the space between the wire coils. seamus can add batteries to decrease the voltage, and he can decrease the space between the wire coils. seamus can add batteries to increase the voltage, and he can increase the space between the wire coils. seamus can add batteries to increase the voltage, and he can increase the space between the wire coils.

Answers

Seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils.

This will increase the magnetic field strength and attract more paper clips. Another option would be to add more coils to the wire, which would increase the magnetic field strength as well. Seamus can add batteries to increase the voltage, and he can decrease the space between the wire coils. By doing these two things, he will be able to boost the power of his electromagnet and attract at least four paper clips.

More on voltage: https://brainly.com/question/13863356

#SPJ11

a 1 540-kg automobile has a wheel base (the distance between the axles) of 3.10 m. the automobile's center of mass is on the centerline at a point 1.10 m behind the front axle. find the force exerted by the ground on each wheel.

Answers

The force exerted by the ground on each wheel of the automobile is 7560.3 N, which is half of the weight of the car.

How to find the force exerted by the ground on each wheel?

Since the center of mass is located 1.10 m behind the front axle, the distance between the center of mass and the rear axle is 3.10 m - 1.10 m = 2.00 m.

The weight of the automobile acts vertically downward through its center of mass and is given by:

W = mg

where

m = mass of the automobile

g = acceleration due to gravity = 9.81 m/s^2

Substituting the given values:

W = (1540 kg) * (9.81 m/s^2) = 15120.6 N

Assuming the weight is evenly distributed between the two wheels, the force exerted by each wheel can be found by considering the torque equilibrium of the automobile about the rear axle.

Since the automobile is in static equilibrium, the sum of the torques about any point is zero. Taking the rear axle as the pivot point, the torque due to the weight of the automobile is counteracted by the torques due to the forces exerted by the ground on the two wheels.

Let F1 and F2 be the forces exerted by the ground on the front and rear wheels, respectively. The torques due to these forces can be found using the distance between the wheels and the center of mass:

τ1 = F1 * 1.10 m (clockwise torque)

τ2 = F2 * 2.00 m (counterclockwise torque)

Since the automobile is in torque equilibrium, we have:

τ1 + τ2 = 0

Substituting the values and solving for F1 and F2:

F2 = (τ1/2.00 m) = (W/2) = 7560.3 N

F1 = (τ2/1.10 m) = (W/2) = 7560.3 N

Therefore, the force exerted by the ground on each wheel is 7560.3 N.

Learn more about Center of mass

brainly.com/question/28996108

#SPJ11

A student collected the data below on the time and distance traveled by a beetle.
Flight of a Beetle
OB. 1 m/s
O C. 1.25 m/s
Distance in meters (m)
OD. 4 m/s
€5.0
4.0
1.0 2.0 3.0 4.0 5.0
Time in seconds (s)
What was the beetle's average flight speed during the time represented in the graph?
O A. .75 m/s
3.0
2.0
1.0

Answers

Answer: the correct answer is option C) 1.25 m/s.

Explanation: The formula for average speed can be expressed as the quotient of the total distance traveled divided by the total time elapsed.

Upon examination of the presented graphical representation, it is evident that the beetle traversed a cumulative distance of 5 meters within a duration of 4 seconds.

Thus, it can be observed that the mean velocity of the beetle would be:

The mean velocity of the object is 5 meters per 4 seconds.

The mean velocity is equivalent to 1.25 meters per second.

The data depicted in the aforementioned graph indicates that the average velocity of the beetle during its flight is 1.25 meters per second.

An inductor is connected to a 20 kHz oscillator that produces an rms voltage of 9.0 V. The peak current is 60 mA. What is the value of the inductance L? Final answer in mH. Please explain step by step.

Answers

The value of the inductance L is approximately 1193.25 mH.

To solve for the value of the inductance L, we can use the formula:

Vrms = Ipeak * (2 * pi * f * L)

where:

Vrms = 9.0 V

Ipeak = 60 mA = 0.06 A

f = 20 kHz

Substituting the values into the formula:

9.0 V = 0.06 A * (2 * pi * 20,000 Hz * L

Simplifying:

L = 9.0 V / (0.06 A * 2 * pi * 20,000 Hz)

L = 9.0 / (0.007536)

L = 1193.25 mH (rounded to two decimal places)

Therefore, the value of the inductance L is approximately 1193.25 mH.

Learn more about  inductance L

https://brainly.com/question/20471259

#SPJ4

An inductor is connected to a 20 kHz oscillator that produces an RMS voltage of 9.0 V. The peak current is 60 mA. The value of the inductance L is  1.692 mH.

Let's start by using the given information and then we'll solve for the value of the inductance L step by step:
1. Frequency of the oscillator (f) = 20 kHz = 20,000 Hz
2. RMS voltage (Vrms) = 9.0 V
3. Peak current (I_peak) = 60 mA = 0.06 A
Now, let's find the peak voltage (V_peak) using the relationship between RMS voltage and peak voltage:
Vrms = V_peak / √2
V_peak = Vrms * √2
V_peak = 9.0 V * √2 ≈ 12.73 V
Next, we'll calculate the impedance (Z) of the inductor using Ohm's law, which relates peak voltage and peak current:
Z = V_peak / I_peak
Z ≈ 12.73 V / 0.06 A ≈ 212.17 Ω
Now, we'll use the formula for the impedance of an inductor:
Z = 2 * π * f * L
Let's solve for the inductance L:
L = Z / (2 * π * f)
L ≈ 212.17 Ω / (2 * π * 20,000 Hz)
L ≈ 1.692 × 10^-3 H
Finally, convert the inductance L to millihenries (mH):
L ≈ 1.692 mH
So, the value of the inductance L is approximately 1.692 mH.

To learn more about inductor, refer:-

https://brainly.com/question/15893850

#SPJ11

The __________ notation of entity-relationship modelling can be used for both conceptual and implementation modelling.
a. Bachman
b. UML
c. Chen
d. Crow's Foot

Answers

The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling.

The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling. Notation refers to the symbols and conventions used to represent concepts in a model. Entity-relationship modelling is a technique used in database design to represent the relationships between entities. Conceptual modelling is the process of creating a high-level representation of a system, while implementation modelling involves creating a detailed representation of the system's implementation.

To learn more about Chen notation Here:

https://brainly.com/question/28234454

#SPJ11

in terms of db , how much louder will the more powerful amplifier be when both are producing sound at their maximum levels?

Answers

The increase in decibels (dB) when comparing the more powerful amplifier to the less powerful one will depend on the specific amplifiers being compared. Generally, a doubling of amplifier power will result in a 3dB increase in sound output.

Therefore, if the more powerful amplifier is twice as powerful as the less powerful one, it will produce a 3dB increase in sound output when both are producing sound at their maximum levels. However, if the difference in power between the two amplifiers is greater or less than a factor of two, the increase in dB will be different.

1. Decibels (dB): A logarithmic unit used to express the ratio of two values of a physical quantity, often used to measure sound levels.

2. Amplifier: An electronic device that increases the power of a signal, typically used for audio purposes.

3. Sound Pressure Level (SPL): A measure of the sound pressure of a sound wave relative to a reference value, usually expressed in decibels (dB).

Now, let's go through the steps to compare the loudness of two amplifiers at their maximum levels:

Find the power output (in watts) of both amplifiers at their maximum levels. You'll need this information to proceed with the calculation.

Calculate the difference in decibels (dB) between the two amplifiers using the following formula:

dB difference = 10 * log10(Power Amplifier 1 / Power Amplifier 2)

Where Power Amplifier 1 and Power Amplifier 2 are the power outputs of the two amplifiers in watts.

Interpret the result. A positive dB difference indicates that Amplifier 1 is louder than Amplifier 2, while a negative dB difference indicates that Amplifier 2 is louder. The larger the absolute value of the dB difference, the greater the difference in loudness between the two amplifiers.

More on amplifier: https://brainly.com/question/26252359

#SPJ11

A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier.

Answers

The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.

In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.

To know more about microscope, here

brainly.com/question/18661784

#SPJ4

--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?

a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.

b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.

c.  The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--

based on the reading of the geiger counter, which type of radiation do you think is primarily emitted from the fiesta ware plate?

Answers

Based on the reading of the Geiger counter, it is likely that the Fiesta Ware plate is emitting beta radiation.

Beta radiation consists of high-energy electrons or positrons that can penetrate through skin and clothing but can be stopped by a thin sheet of metal. This type of radiation is commonly emitted by radioactive materials such as strontium-90, which was often used in the production of Fiesta Ware.

Beta radiation (β) is the transmutation of a neutron into a proton and an electron (followed by the emission of the electron from the atom's nucleus: e − 1 0 ). When an atom emits a β particle, the atom's mass will not change (because there is no change in the total number of nuclear particles).

To know more about Beta Radiation, please click:

brainly.com/question/16645044

#SPJ11

Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would be
expected to
O experience an increase in frequency.
O experience a decrease from transverse waves to longitudinal waves.
O experience a decrease in frequency
O experience an increase in their amplitude.
7
8
9 10 11 12 13 14 15 16 Next

Answers

Based on the Doppler effect, the electromagnetic waves reaching Earth from a galaxy that is moving away from Earth would experience a decrease in frequency.

option C.

What is Doppler effect?

The Doppler effect is a phenomenon where the frequency of waves (such as electromagnetic waves or sound waves) is shifted as a result of the relative motion between the source of the waves and the observer. When a source of waves is moving away from an observer, the waves get stretched out, resulting in a decrease in frequency. This is known as redshift for light waves, which are a type of electromagnetic waves.

In the context of a galaxy moving away from Earth, the electromagnetic waves (such as light) emitted by the galaxy would experience a redshift, which means the frequency of the waves would decrease. This is a key observation in astronomy and cosmology that has been used to provide evidence for the expanding universe and the Big Bang theory, as galaxies in the universe are generally observed to be moving away from each other, causing their light to be redshifted.

Learn more about doppler effect here: https://brainly.com/question/3841958

#SPJ1

More frequent holidays for workers in Europe than in the United States contribute to:
a) Higher employment-to-population ratios in Europe than in the United States,
b) Lower employment-to-population ratios in Europe than in the United States,
c) More hours worked per year by the average employed person in Europe than the average employed person in the United States,
d) Fewer hours worked per year by the average employed person in Europe than the average employed person in the United States.

Answers

Lower employment-to-population ratios in Europe than in the United States. Frequent holidays may decrease the total number of working days, resulting in lower employment rates. Thus the correct option is B.

Europe has lower employment-to-population ratios than the US. While more frequent holidays may enhance work-life balance in Europe, they might also reduce the overall number of working days, which would lead to lower employment rates.

However, given that working hours can differ greatly between industries, job kinds, and nations, this does not necessarily imply that individuals in Europe work fewer hours per year than those in the United States. Workplace regulations and cultural perspectives on work can also have an impact on employment rates and working hours.

Learn more about employment:

https://brainly.com/question/28183134

#SPJ4

B) Lower employment-to-population ratios in Europe than in the United States.

Answer - While European workers may have more frequent holidays, this does not necessarily mean they work fewer hours overall or that there are more jobs available. In fact, European countries often have stricter labor laws and regulations which can make it harder for employers to hire new workers. As a result, the employment-to-population ratio tends to be lower in Europe than in the United States, meaning a smaller percentage of the population is employed.

To learn more about employment , click on this -

brainly.com/question/1361941

#SPJ11

a truck with 26-in.-diameter wheels is traveling at 45 mi/h. find the angular speed of the wheels in rad/min: rad/min how many revolutions per minute do the wheels make? rpm

Answers

After converting to specified units, the angular speed is found to be 3655 rad/min. The wheels will have to rotate at a speed of 581.77 revolutions per minute.

As the diameter is in inches and the revolutions are calculated per minutes, we have to convert the unit of speed from mph to in/min.

1 mile = 63360 in

1 hour = 60 minutes

45 miles/ h = (63360 × 45) / 60 = 47520 in/min

Radius is half the diameter. So r = 26/2 = 13 inches.

Angular speed = speed/ radius = 47520 / 13 = 3655.38 rad/min

Revolutions per minute = Angular speed / 2π

                                       = 3655.38 / 2π =581.77

So the angular speed will be 3655.38 rad/min and the Revolutions per minute will be 581.77 rpm.

For more information regarding angular speed and revolutions per minute, kindly refer

https://brainly.com/question/4721004

#SPJ4

Where do sound waves travel faster? (1 point)
Responses

A. through denser materials, because the molecules in a tightly packed medium collide more frequently

B. through less dense materials, because the molecules in a loosely packed medium collide less frequently

C. through denser materials, because the molecules in a tightly packed medium collide less frequently

D. through less dense materials, because the molecules in a loosely packed medium collide more frequently

Answers

Sound waves travel faster through denser materials, because the molecules in a tightly packed medium collide more frequently (option A)

What are Sound waves?

Sound waves are a type of mechanical wave that propagate through a medium, such as air, water, or solids, by causing the molecules of the medium to vibrate back and forth in the direction of the wave's motion.

These vibrations create changes in pressure that move through the medium, ultimately reaching our ears and allowing us to perceive sound. Sound waves can have different properties such as frequency, wavelength, amplitude, and speed, which determine the characteristics of the sound that we hear.

Learn about sound waves here https://brainly.com/question/13105733

#SPJ1

a projectile of mass 1.3 kg is launched horizontally from an initial height 2.9 m with an initial velocity 8.5 m/s. this velocity in the x direction is preserved when you ignore air resistance. the projectile still accelerates in the vertical y direction toward the ground, but this is exactly the energy lost from potential energy. energy is conserved as long as you use the total mechanical energy equation. what is the total final kinetic energy (joules) as the projectile just reaches the ground? give your numerical answer to one decimal place precision. assume g

Answers

The total final kinetic energy of the projectile as it reaches the ground is 49.5 J (to one decimal place of precision).

Applying conservation of energy

To solve this problem, we need to use the conservation of energy principle. The initial total mechanical energy (potential plus kinetic) of the projectile is converted into its final total mechanical energy when it reaches the ground, assuming no energy is lost due to air resistance.

The initial potential energy is given by:

Ep = mgh = (1.3 kg)(9.81 m/s^2)(2.9 m) = 36.01 J

The initial kinetic energy in the x-direction is given by:

Kx = 0.5mvx^2 = 0.5(1.3 kg)(8.5 m/s)^2 = 49.47 J

Since there is no initial kinetic energy in the y-direction, the total initial mechanical energy is the sum of the initial potential and kinetic energies in the x-direction:

Ei = Ep + Kx = 36.01 J + 49.47 J = 85.48 J

At the final moment, the projectile reaches the ground, so its final potential energy is zero. Therefore, the final total mechanical energy is equal to the final kinetic energy:

Ef = Kf

We know that the projectile is subject to constant acceleration due to gravity (9.81 m/s^2) in the y-direction, and we can use the kinematic equation:

y = yo + voyt + 0.5a*t^2

where y is the final position (0 m), yo is the initial position (2.9 m), voy is the initial velocity in the y-direction (0 m/s), a is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the projectile to reach the ground.

Rearranging this equation to solve for t, we get:

t = sqrt(2(y - yo)/a) = sqrt(2(0 - 2.9)/(-9.81)) = 0.762 s

Now we can use the final velocity in the x-direction and the time of flight to calculate the final kinetic energy in the x-direction:

Kxf = 0.5mvx^2 = 0.5(1.3 kg)(8.5 m/s)^2 = 49.47 J

Therefore, the final total mechanical energy and final kinetic energy are:

Ef = Kf = Kxf = 49.47 J

Therefore, the total final kinetic energy of the projectile as it reaches the ground is 49.5 J (to one decimal place of precision).

Learn more on kinetic energy here https://brainly.com/question/8101588

#SPJ1

a horizontal force of 80 n used to push a chair across a room does 320 j of work. how far does the chair move in this process?

Answers

The amount of work done by the force of 80 n is 320 j. Work is calculated by multiplying the force (F) by the distance (d) moved. Therefore, d = 320/80 = 4 m. This means that the chair moved 4 m in the process.

Energy is transformed into work when it takes another form.

In this instance, the chair is being moved across the room by the force of 80 n, which is transmitting its energy to it as labour. In joules (J), this energy is expressed.

As a result, the work produced by the force of 80 n is equivalent to the 320 J of energy that was transmitted. This quantity of energy is equivalent to the 4 m that the chair has travelled.

Complete Question:

A horizontal force of 80 n used to push a chair across a room does 320 j of work. How far does the chair move in this process?

To learn more about work visit:

https://brainly.com/question/25573309

#SPJ4

the average temperature of mars is lower than that of earth. if a distant observer measures the infrared radiation from both mars and earth, then

Answers

If a distant observer measures the infrared radiation from both Mars and Earth, they would find that Earth emits more infrared radiation than Mars.

If a distant observer measures the infrared radiation from both Mars and Earth, they would observe that Mars emits less infrared radiation compared to Earth. This is because the average temperature of Mars is much lower than that of Earth, and objects with lower temperatures emit less infrared radiation. Therefore, the observer would detect more infrared radiation coming from Earth compared to Mars.

To know more about Infrared Radiations , click on this -

brainly.com/question/20779091

#SPJ11

A distant observer measuring the infrared radiation from both Mars and Earth would observe that Mars emits less infrared radiation than Earth, indicating a lower average temperature.

When the temperature of is about absolutely zero, all bodies emits infrared radiations. This amount of radiation highly depends on the temperature of the body.

As we assume this, Mars has a lower average temperature as compared to Earth, Mars emits less IR rays. Therefore, a distant observer measuring the infrared radiation from both planets would observe that Mars emits less radiation than Earth. Hence, this is the logic we are using to conclude that there is a lower temperature on Mars than Earth.

To know more about Infrared rays, visit,

https://brainly.com/question/29796311

#SPJ4

The tire had an initial volume of 7 liters, at a temperature of 25° C. After driving for an hour, friction from the road had increased the temperature of air in the tire to 35° C. Assuming the pressure inside the tire did not change, what would the tire’s new volume be?

Answers

Answer:

using

V2= V1T2/T1

V2= 9.8L

an air parcel rises over a mountain and cools adiabatically. which lifting mechanism has acted on this parcel?

Answers

The mountain or orographic lifting mechanism has acted on the air parcel, causing it to rise and cool adiabatically as it moves up and over the mountain.

A mountain presents a physical barrier that pushes an air parcel to ascend when it rises over it. Orographic lifting is the term for this procedure. The parcel undergoes a drop in pressure as it rises, which causes adiabatic cooling. The air parcel cools due to adiabatic expansion as it climbs, which causes a decrease in temperature.

The dry adiabatic lapse rate, which measures the temperature drop as 10°C per 1000 metres of climb, is used to describe this phenomenon. The air's ability to condense and form clouds in response to cold may also result in precipitation.

Learn more about orographic lifting:

https://brainly.com/question/12489498

#SPJ4

Orographic lifting mechanism has been used.

Orographic lift of moist air coming off the ocean produces clouds along the Santa Lucia Mountains south of Monterey, California, USA (Credit: NOAA). As an example, the North Shore mountains immediately north of Vancouver often experience heavy rain and snowfall due to orographic uplift.

Detailed Answer - Hi! The lifting mechanism that has acted on the air parcel as it rises over a mountain and cools adiabatically is called Orographic Lifting. This occurs when an air mass is forced to rise over elevated terrain, such as a mountain, causing it to cool and potentially form clouds or precipitation.

to learn more about orographic lifting, click here -

brainly.com/question/8912667

#SPJ11

a baseball pitcher loosens up his pitching arm. he tosses a 0.140-kg ball using only the rotation of his forearm, 0.270 m in length, to accelerate the ball. if the ball starts at rest and is released with a speed of 24.0 m/s in a time of 0.425 s, what torque is applied to the ball while being held by the pitcher's hand to produce the angular acceleration?

Answers

Using the moment of inertia and kinematic equations, the torque applied to the ball can be calculated as 2.26 N m, as the pitcher rotates his forearm to toss a 0.140-kg ball with a speed of 24.0 m/s in a time of 0.425 s.

How to find the torque applied to the ball?

To calculate the torque applied to the ball by the pitcher's hand, we need to use the equation:

τ = Iα

where τ is the torque, I is the moment of inertia, and α is the angular acceleration.

The moment of inertia for a point mass rotating about a fixed axis is given by:

I = mr²

where m is the mass of the object and r is the distance from the axis of rotation. In this case, the object is a ball with a mass of 0.140 kg, and the distance from the axis of rotation (the pitcher's shoulder) to the center of mass of the ball is 0.270 m. Therefore:

I = (0.140 kg)(0.270 m)²

I = 0.0108 kg m²

The angular acceleration can be calculated using the following kinematic equation:

ω = αt

where ω is the angular velocity, and t is the time. The ball starts from rest and is released with a speed of 24.0 m/s in a time of 0.425 s, so:

ω = 24.0 m/s / 0.270 m

ω = 88.89 rad/s

α = ω / t

α = 88.89 rad/s / 0.425 s

α = 209.4 rad/s²

Finally, we can use the equation τ = Iα to calculate the torque applied by the pitcher's hand:

τ = Iα

τ = (0.0108 kg m²)(209.4 rad/s²)

τ = 2.26 N m

Therefore, the torque applied to the ball while being held by the pitcher's hand to produce the angular acceleration is 2.26 N m.

Learn more about Torque

brainly.com/question/25708791

#SPJ11

what constant acceleration is required to increase the speed of a car from 22 mi/h to 58 mi/h in 2 s? (round your answer to two decimal places.)

Answers

The constant acceleration required to increase the speed of the car from 22 mi/h to 58 mi/h in 2 seconds is approximately 26.41 ft/s², rounded to two decimal places.

To find the constant acceleration required to increase the speed of a car from 22 mi/h to 58 mi/h in 2 seconds, we'll use the formula for acceleration: a = (Vf - Vi) / t, where a is acceleration, Vf is the final velocity, Vi is the initial velocity, and t is the time taken.

First, convert the velocities from mi/h to ft/s (1 mi/h = 1.467 ft/s):
Vi = 22 mi/h * 1.467 ft/s = 32.27 ft/s
Vf = 58 mi/h * 1.467 ft/s = 85.08 ft/s

Now, plug the values into the formula:
a = (85.08 ft/s - 32.27 ft/s) / 2 s

a = 52.81 ft/s² / 2 s
a = 26.41 ft/s²

To learn more about : acceleration

https://brainly.com/question/460763

#SPJ11

Other Questions
when a salesperson figures out what the customer's problem is, works with the customer to create a vision of a solution, and then comes up with a plan to realize that vision, it is called: The shaded area of a circle is 25 cm squared. if the diameter of the circle is 10cm, determine what percentage of the circle is shaded problem 10-36 (lo. 3, 6, 7, 8, 9, 11) marcus and madison are equal members of an llc. on january 1 of the current year, to acquire a one-third interest in the entity, nora contributed a parcel of land she had held for investment. (at this time, the entity was renamed mmn, llc.) nora had purchased the land for $120,000; its fair market value was $90,000 at the contribution date. a few years later, the llc sells nora's land for $84,000. at the beginning of that year, nora's tax basis capital account was $200,000 and marcus and madison's tax basis capital accounts were $170,000. question content area a. regarding the land sale, how much gain or loss is recognized and how is it allocated? Suppose that the total debt on credit cards in 2019 was $1,088 billion, and that this was an increase from the year before. This would cause the M1 money supply to ____ and the M2 money supply to ______.Group of answer choicesA. increase; increaseB. decrease; decreaseC. remain unchanged; remain unchangedD. remain unchanged; increase congress rejects american membership in the league of nations the kellogg-briand pact of 1928 the neutrality acts of 1936-37 charles lindbergh and the america first committee which would make the best title for a research paper about these topics? Lattice energy is an estimate of the bond You own 23 CDs. You want to randomly arrange 5 of them in a CD rack. What is the probability that the rack ends up in alphabetical order?The probability that the CDs are in alphabetical order is 2)Phillip has 8 red balls, 3 green balls, 6 yellow balls, 3 orange balls, 13 black ballsand 15 blue balls in his bag.Mean: | 0,2, Median :Mode:Range The Emancipation Proclamation did all of the following exceptfor:A. Dashed the last hopes of getting any help BritainB. Forced the last 4 states to secede from the Union and join the ConfederatesC. Allowed 1,000s of African-Americans to join and serve in the Union forcesD. Changed the goal of the war from just being a fight to save the Union to now stopping slavery in the South ivonne is excited about going to her first sorority formal next month. however, she is concerned that she does not have anything appropriate to wear. since realizing that she needs to get a new dress, ivonne has started paying attention to advertisements, visiting retail stores, and browsing the web for a dress for the formal. ivonne is engaged in: MM Model with Zero Taxes Qulipen Company is unlevered and has a value of $25 billion. An otherwise identical but levered firm finances 45% of its capital structure with debt. Under the MM rero-tax model, what is the value of the levered firm? Enter your answer in billions. For example, an answer of $1 billion should be entered as 1, not 1,000,000,000. Round your answer to the nearest whole number 5. Circle B is shown, with GHJK inscribed in the circle. The mGHJ = (3x+50), and mzHJK = (4x) and mLGK] = (4x-10). Find HGK and JHG 13. The newspaper headline on the left describes an event that took place in theMiddle East.Which course of action did the United States take in response to thisinternational incident?A. It refused to give Iraq any additional humanitarian aid.B. It launched an invasion of Iraq to topple dictator Saddam Hussein.C. It organized a military alliance that forced the Iraqis out of Kuwait.D. It seized the staff of the Iraqi Embassy in Washington, D.C., as hostages. You've been tasked with setting up a virtualization environment on your company's newest server. This server will be solely devoted to virtualization and needs to be fast and secure. Because this server will mainly be used for internal software testing, your company doesn't feel that the virtual machines created there will need to be migrated to other virtualization environments. Which of the following virtualization options would be the best setup for this scenario (using only the parameters given above): O A.) Type 1 Hypervisors B.) Type 2 Hypervisors C.) Container/application virtualization D.) All of the Above E.) B and C establishing career paths or planned sequences of advancement for workers through different positions represents what type of recruiting? I need help with this please Find a congruence transformation that maps triangle RST to triangle UVW 48 grams of MgCl2 is dissolved in 500g of water, DENSITY OFWATER = 1 kg/1L. What is the MOLALITY of this solution? Pleaseshow your steps.molkgm =orm = mol = kgStep1: given information:solute=(UNIT=Solvent =(UNIT =)) A stainless steel patio heater is a square pyramid. The length of one side of the base is 22.6 in. The slant height of the pyramid is 88.9 in. What is the height of the pyramid?NEED AN ANSWER ASAP! IT'S DUE TOMORROW If you wanted to use the following code to draw a circle to the canvas with the radius, and x and y coordinates given by the user, how would you ask for this information?circle = Circle(radius) circle.set_position(x, y)