a battery company makes 12-volt car batteries. after many years of product testing, the company knows that the average life of its battery is normally distributed, with a mean of 44 months and a standard deviation of 7 months. a button hyperlink to the salt program that reads: use salt. (a) if the company guarantees a full refund on any battery that fails within the 36-month period after purchase, what percentage of its batteries will the company expect to replace? (round your answer to two decimal places.) % (b) if the company does not want to make refunds for more than 9% of its batteries under the full-refund guarantee policy, for how long should the company guarantee the batteries (to the nearest month)?

Answer:2/3

Step-by-step explanation:

its the only possible answer because it needs to have a scale factor below one as A'B'C'D' is smaller than ABCD

Answer: 2/3

Step-by-step explanation:

The corresponding side of AD is A'D'.

AD = 30

A'D' = 20

Scale factor = 2/3 because AD * 2/3 = A'D'

If I'm wrong, please tell me.

The leg measurement will make a right triangle is 21 cm.

The longest side of a right-angled triangle, i.e. the side opposite the right angle, is called the hypotenuse in geometry.

Pythagorean theorem :

If p be the length of the hypotenuse of a right-angled triangle, q and r be the lengths of the other two sides, then

p² = q² + r²

The lengths of the other two sides of the given right-angled triangle are 20 cm and 21 cm. Put these values in the above theorem to get the desired result.

Now, p² = (20)² + (21)²

= 400 + 441 = 841

i.e. p = √(841) = 29

Therefore the length of the hypotenuse is 29 cm. The right angle traingle is 21 cm.

Learn more about hypotenuse, here:

https://brainly.com/question/28946097

#SPJ1

The combined amount in both accounts after 10 years is $16,869.58

To solve the problem, we need to use the following formulas:

Simple Interest = Principal x Rate x Time

Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]

where:

Principal = the initial deposit

Rate = the interest rate (in decimal form)

Time = the number of years

n = the number of times interest is compounded per year

For Account 1:

Simple Interest = Principal x Rate x Time

= $6000 x 0.035 x 10

= $2100

The amount in Account 1 after 10 years will be the initial deposit plus the interest earned:

= $6000 + $2100

= $8100

For Account 2:

Since the interest is compounded annually, n = 1.

Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]

= [tex]6000 *(1 + 0.035/1)^{1 * 10}\\= $6000 (1.035)^{10}\\= $8769.58[/tex]

After ten years, the amount in Account 2 will be $8769.58.

After ten years, the combined amount in both accounts will be:

$8100 minus $8769.58 equals $16869.58, resulting in a total of $16,869.58 in both accounts after ten years.

know more about simple interest visit:

https://brainly.com/question/25845758

#SPJ1

Answer:

Step-by-step explanation:

domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum

Answer:

$525

Step-by-step explanation:

Jackie starts with $500, and the interest rate is 5% per year.

This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.

Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:

[tex]\frac{5}{100}[/tex] · 500 =

[tex]\frac{2500}{100}[/tex] =

25

Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.

The value of x in the Intersecting chords is 15

From the question, we have the following parameters that can be used in our computation:

Intersecting chords

The value of x is then calculated as

x = 1/2(30 - 2x + 30)

So, we have

2x = 30 - 2x + 30

Evaluate the like terms

4x = 60

Divide

x = 15

Hence, the value of x is 15

Read more about angles at

https://brainly.com/question/28293784

#SPJ1

Lin plans to swim 12 laps and has already swum 9.75 laps, so the number of laps she has left to swim can be found by subtracting 9.75 from 12:

y = 12 - 9.75

Simplifying the right side:

y = 2.25

Therefore, Lin has 2.25 laps left to swim.

The range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

what is statistics?

Statistics is a branch of mathematics that deals with collecting, analyzing, interpreting, presenting, and organizing data. It involves the study of methods for designing experiments and surveys, analyzing and interpreting data, and making decisions based on data. Statistics plays an important role in a wide range of fields, including science, social science, economics, finance, engineering, and many others. It is used to draw conclusions, make predictions, and inform decision-making by providing a quantitative and objective approach to understanding and analyzing data.

The most accurate measure of variability to use for this data set is the range of 49. The range is the difference between the highest and lowest values in the data set, which in this case is 59 - 10 = 49. The range provides a simple and straightforward measure of the spread of the data and is useful when the data is not too skewed.

While the data in this set is skewed, the range is still an appropriate measure of variability because there are no extreme outliers that would significantly affect the range. The IQR (interquartile range) is another measure of variability that is useful for skewed data, but in this case, it would not be the most appropriate choice because the data set is not divided into quartiles and the IQR would not provide additional information beyond what the range already shows.

Therefore, the range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

To learn more about statistics from the given link

https://brainly.com/question/29093686

#SPJ1

The surface area of the actual ramp, including the underside, is approximately 15.38 yd².

What is triangle?

A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.

To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.

We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.

Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:

height of actual ramp / height of model = 21.6 in / 3 in = 7.2

We can use this ratio to find the dimensions of the actual ramp:

height of actual ramp = 7.2 * 3 in = 21.6 in

length of actual ramp = 7.2 * 8 in = 57.6 in

width of actual ramp = 7.2 * 5 in = 36 in

Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:

Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²

Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²

Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²

The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:

Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²

Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²

Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:

Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²

Converting to yards and rounding to two decimal places, we get:

Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)

Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².

To learn more about triangle from the given link:

https://brainly.com/question/2773823

#SPJ1

The number of poetry books at the library that are for children is 510

from the question, we have the following parameters that can be used in our computation:

Books = 600

If 8.5/10 of the poetry books are for children, we can calculate the number of poetry books for children as follows:

Number of poetry books for children = (8.5/10) x 600

Number of poetry books for children = 510

Therefore, there are 510 poetry books at the library for children.

Read more about proportion at

https://brainly.com/question/870035

#SPJ1

Answer: 6 3/7

Step-by-step explanation:

9/1 x 5/7

If we multiply the numerators and denominators, we get 45/7 or 6 3/7 as a mixed number.

Answer:

[tex]\frac{45}{7}[/tex] or 6.4285

Step-by-step explanation:

First, multiply 9 and 5, which gives you 45.

9(5)=45

Then, divide 45 by 7.

45/7=6.4285

That gives  you  [tex]\frac{45}{7}[/tex] or 6.4285

Hope this helps!

Testing is only one part of the overall assessment process.

What is evaluation in education?

Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).

What is an assessment? Also what does it mean?

At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”. 

Learn more about assessment

brainly.com/question/28046286

#SPJ1

The plant is not in the sprinkler's range since the distance between the sprinkler and the plant is greater than the radius of the sprinkler's range.

The distance between the sprinkler and the plant can be calculated using the Pythagorean theorem, which states that in a right triangle, the square of the length of the hypotenuse (the longest side) is equal to the sum of the squares of the lengths of the other two sides.

In this case, the distance between the sprinkler and the plant is the hypotenuse of a right triangle with legs of length 4 feet and 6 feet:

distance = sqrt(4^2 + 6^2)

distance = sqrt(16 + 36)

distance = sqrt(52)

distance ≈ 7.21 feet

Since the distance between the sprinkler and the plant is greater than the radius of the sprinkler's range (8 feet), the plant is not in the sprinkler's range. Therefore, the plant will not receive water from the sprinkler.

Learn more about Pythagorean theorem here

brainly.com/question/14930619

#SPJ4

Okay, here are the steps to find the minimum value of P:

1) Given: |z|=|w|=1 (z and w are complex numbers with unit modulus)

|z+w|=sqrt(2)

Find z and w such that these conditions are satisfied.

Possible solutions:

z = 1, w = i (or vice versa)

z = i, w = 1 (or vice versa)

2) Substitute into P = |w-\frac{4}{z}+2(1+\frac{w}{z})i|

For the cases:

z = 1, w = i: P = |-1-4+2(1+i)i| = |-5+2i| = sqrt(25+4) = 5

z = i, w = 1: P = |1-\frac{4}{i}+2(1+\frac{1}{i})i| = |-3+2i| = sqrt(9+4) = 5

3) The minimum value of P is 5.

So in summary, the minimum value of

P = |w-\frac{4}{z}+2(1+\frac{w}{z})i|

is 5.

Let me know if you have any other questions!

A statistician would reply that in order to determine if the generic drug is less effective than the name-brand drug, a hypothesis test needs to be conducted.

The null hypothesis (H0) would be that there is no difference in the average blood pressure reduction between the two drugs, while the alternative hypothesis (H1) would be that the name-brand drug has a higher average reduction in blood pressure than the generic drug.

To test these hypotheses, a t-test would be appropriate since we have two independent samples (control and treatment groups) with known means, standard deviations, and sample sizes. The t-test will provide a p-value, which can be compared to a chosen significance level (e.g., α = 0.05).

If the p-value is less than the significance level, we reject the null hypothesis and conclude that there is a significant difference in the average blood pressure reduction between the two drugs. If the p-value is greater than the significance level, we fail to reject the null hypothesis, meaning we do not have enough evidence to claim that the name-brand drug is more effective than the generic drug.

Learn more about hypothesis:

https://brainly.com/question/10854125

#SPJ11

The domain of the function 8 - [tex](x-3)^{2}[/tex] is R which is all the real numbers.

What is domain of a function?

The set or grouping of all potential values that may be used in the function is known as the domain.

We are given a function as 8 - [tex](x-3)^{2}[/tex].

Now, in order to find the domain, we need to find the values where the function is not defined for a value of x.

But, there is no such value for x where the function is not defined.

This means that all values of x give an output.

So, the domain is the set of all the real numbers.

Hence, the domain of the given function is R.

Learn more about domain of function from the given link:

https://brainly.com/question/1369616

#SPJ1

The main topic is the split-half reliability test used in psychological research to assess the internal consistency of a scale.

In psychological research, reliability is a crucial aspect of measuring constructs or attributes. One commonly used method for assessing the reliability of a scale is the split-half reliability test.

In this test, the scale questions are divided into two parts equally, and the resulting scores of both parts are correlated against one another.

For example, if a scale had 20 items, the items could be randomly split into two groups of 10 items each.

Scores are then calculated for each group, and the scores are correlated with each other to determine the degree of consistency between the two halves.

The correlation coefficient obtained from this analysis provides an estimate of the internal consistency of the scale.

A high correlation coefficient indicates a high level of internal consistency, indicating that the two halves of the scale are measuring the same construct or attribute.

Conversely, a low correlation coefficient suggests that the two halves of the scale are not measuring the same construct or attribute, and the scale may need to be revised or abandoned.

Overall, the split-half reliability test provides a quick and efficient method for evaluating the reliability of a scale.

However, it is important to note that this method does have some limitations, such as the possibility of unequal difficulty or discrimination of the items in each half of the scale.

Therefore, researchers often use other methods, such as Cronbach's alpha, in conjunction with the split-half reliability test to provide a more comprehensive assessment of the reliability of a scale

Learn more about reliability test

brainly.com/question/27873337

#SPJ11

The two options that represent circles with diameter 12 units and center on the y-axis are:

x² + (y - 6)² = 36

x² + (y + 6)² = 36

The diameter of a circle is a straight line segment that passes through the center of the circle and connects two points on its circumference. It is twice the length of the circle's radius.

The equations that represent circles that have a diameter of 12 units and a center that lies on the y-axis are:

x² + (y - 6)² = 36

x² + (y + 6)² = 36

Explanation:

For a circle with diameter 12 units, the radius is half of the diameter, which is 6 units.

Since the center of the circle lies on the y-axis, the x-coordinate of the center is 0.

The general equation for a circle with center (h, k) and radius r is (x - h)² + (y - k)² = r².

Using the given information, we substitute h = 0, k = ±6, and r = 6 to get the two equations:

(x - 0)² + (y - 6)² = 6² => x² + (y - 6)² = 36

(x - 0)² + (y + 6)² = 6² => x² + (y + 6)² = 36

Therefore, the two options that represent circles with diameter 12 units and center on the y-axis are:

x² + (y - 6)² = 36

x² + (y + 6)² = 36

To know more about circles diameter visit:

https://brainly.com/question/28162977

#SPJ1

The drive-thru with typically more wait time is Burger Quick, because it has a larger median. The Option A.

The median is a measure of central tendency that represents the middle value of a set of data. In this case, the median wait time at Burger Quick is 15.5 minutes, while the median wait time at Super Fast Food is 12 minutes.

This indicates that, on average, customers at Burger Quick experience a longer wait time compared to customers at Super Fast Food. The larger median at Burger Quick suggests that there may be some longer wait times skewing the data towards the higher end which could be due to various factors such as slower service, or other operational issues at Burger Quick resulting in a longer wait time for customers at their drive-thru.

Read more about median

brainly.com/question/16408033

#SPJ1

The height of the parabolic balloon arch for the prom is 12.25 feet.

Using these assumptions, we can find the equation of the parabola that the arch follows as x = a(y-k)² + h, where (h,k) is the vertex and a is a constant that determines the shape of the parabola. We can find the value of a by using one of the points that the arch passes through, say (3,0):

3 = a(0-k)² + h h = 3 - a(k²)

Similarly, using the other point that the arch passes through, say (7,0):

7 = a(0-k)² + h h = 7 - a(k²)

Equating the expressions for h, we get:

3 - a(k²) = 7 - a(k²) a = -1/4

Substituting this value of a into one of the equations for h, say h = 7 - a(k²), we get:

h = 7 + 1/4(k²)

So the vertex of the parabola is at (h,k) = (7,0), and the equation of the parabola is x = -1/4(y² - 28y + 49).

To find the height of the arch, we need to find the y-coordinate of the vertex, which is k = 0. So the height of the arch is given by the distance between the vertex and the lowest point of the arch, which is the x-intercept of the parabola. To find the x-intercept, we set y = 0 in the equation of the parabola:

x = -1/4(0² - 28(0) + 49)

x = -1/4(49) = -12.25

However, since we are dealing with a physical object, the height cannot be negative. Therefore, we take the absolute value of the x-intercept, which gives us:

| -12.25 | = 12.25 feet

To know more about height here

https://brainly.com/question/10726356

#SPJ4

The two null hypothesis that are correct answer are two-sample t-test and one-sample t-test.

Among the group of answer choices provided, the tests that require calculating degrees of freedom are the two-sample t-test and the one-sample t-test. Both of these tests belong to the t-test family and involve using degrees of freedom to determine the critical t-value.

In summary:
- Null hypothesis: The assumption that there is no significant difference between the sample and population or between two samples.
- T-test: A statistical test used to determine if there is a significant difference between the means of two groups or between a sample and population mean.
- Degrees of freedom: A value used in statistical tests that represents the number of independent values in a data set, which can affect the outcome of the test.

So answer is: two-sample t-test and one-sample t-test.

Learn more about null hypothesis here:

https://brainly.com/question/28920252

#SPJ11

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

The correct answer is: all of the above.

All these tests require calculating degrees of freedom:

1. Two-sample t-test:

Degrees of freedom are calculated using the formula (n1 + n2) - 2, where n1 and n2 are the sample sizes of the two

groups being compared.
2. Chi-squared test:

Degrees of freedom are calculated using the formula (rows - 1) * (columns - 1), where rows and columns represent the

number of categories in the data.
3. One-sample t-test:

Degrees of freedom are calculated using the formula n - 1, where n is the sample size.

The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-

sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also

requires degrees of freedom, but it is not a test for a null hypothesis.

for such more question on null hypothesis

https://brainly.com/question/4436370

#SPJ11

Answer: 1 is .4

2. is .6

3 is .5

4 is .375

5 is .18

6 is .71

7 is .16

8 is .66 repeating

9 is .91

and 10 is .25

Step-by-step explanation:

to get all these and fractions to decimals in the future just divide the numerator by the denominator in other words the top number by the bottom number

1): 0.4

2): 0.67 or 0.7

3): 0.5

4): 0.37 or 0.4

5): 0.18

6): 0.42 or 0.5

7): 0.17

8): 0.7

9): 0.97 or 1

10): 0.25

The surface area of the two solids are listed below:

Case 1 - 232 square centimeters

Case 2 - 240 square centimeters

The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:

Triangle

A = 0.5 · b · h

Rectangle

A = b · h

Case 1

A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)

A = 232 cm²

Case 2

A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)

A = 24 cm² + 96 cm² + 120 cm²

A = 240 cm²

To learn more on surface areas of solids: https://brainly.com/question/31126484

#SPJ1

Answer:

x ≈ 39.5°

Step-by-step explanation:

using the cosine ratio in the right triangle

cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then

x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )

Answer:

The answer is 28

Step-by-step explanation:

sin0=opp/hyp

let hyp be x

sin30=14/x

0.5x=14

divide both sides by 0.6

x=14/0.5

x=28

For the given integer, the maximum starting population size that will eventually lead to extinction is 98, since any larger value will result in the population either stabilizing at a positive value or growing indefinitely.

The equation in question is:

dN/dt = -0.001N(N - 110)(N - 99)

Here, N represents the population size, and dN/dt represents the rate of change of the population with respect to time. The right-hand side of the equation tells us how the population size changes over time, and it's determined by the current population size N, as well as the two constants 110 and 99.

We can do this by setting dN/dt equal to zero and solving for N:

dN/dt = -0.001N(N - 110)(N - 99) = 0

=> N = 0, N = 99, N = 110

We can then plot the direction field (i.e., arrows indicating the direction of change) on each interval, and use this to determine the behavior of the solution curve. In this case, we can see that the direction of the arrows changes at each critical point, indicating that the population behavior switches between growing and declining as we move from one interval to the next.

Specifically, we can see that if the initial population size A is less than 99, the population will decline to extinction. If the initial population size is between 99 and 110, the population will initially decline but then grow and eventually stabilize at N = 110. If the initial population size is greater than 110, the population will grow exponentially and tend towards infinity.

To know more about integer here

https://brainly.com/question/15276410

#SPJ4

Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.

The y-intercept of a function represents the value of the function when the input is equal to zero.

The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).

Here we have

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

=> f(d) = 7(1.06)^d

Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29  

=> 13.29 = [tex]7(1.06)^{d}[/tex]

=> ln(13.29/7) = d ln(1.06)

=> d = ln(13.29/7)/ln(1.06) ≈ 11  

Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.

Substituting d = 0 into the given equation, we get:

f(0) = 7(1.06)⁰ = 7

Therefore, The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):

f(4) = 7(1.06)⁴ ≈ 8.84

f(11) = 7(1.06)¹¹ ≈ 13.29

The slope of the second line passing through these two points is:

Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64

Therefore,

The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Learn more about Functions at

https://brainly.com/question/24839787

#SPJ1

Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.

Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.

For more information about data classification, visit :

https://brainly.com/question/30580761

#SPJ4

Answer:

m = 6

Step-by-step explanation:

We have the proportion:

12/m = 18/9

To solve for m, we can cross-multiply the terms in the proportion:

12 × 9 = 18 × m

Simplifying both sides of the equation, we get:

108 = 18m

Dividing both sides by 18, we get:m = 6

Therefore, the solution to the proportion 12/m = 18/9 is m = 6.

Answer: m = 6

Step-by-step explanation:

First, we will rewrite this proportion:

     [tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]

Next, we will cross-multiply:

     12 * 9 = 18 * m

     108 = 18m

Lastly, we will divide both sides of the equation by 18:

     m = 6

We can also solve this proportion another way.

     We know that 18/9 = 2, so 12/m must equal 2 as well.

     12/6 = 2, so m = 6.