If a chemist collects 372 cm³ of gas over water at 90˚c and 111.0 kpa, 118.34 ml volume of the dry gas occupy at 2˚c and 98.0 kpa.
T₂ = 2 ˚C
= 2 + 273 K
= 275 K
At 2 ˚C
P₂ = 98 kpa - 0.71
= 97.29 kpa
= 0.960 atm
V₂ needs to calculate
The ideal gas equation
PV = nRT
P₁V₁/T₁= P₂V₂/T₂
0.403 × 372 ÷ 363 k = 0.960 × V₂ ÷ 275
V₂ = 118.34 ml of dry gas
The volume is equal to 118.34 ml of dry gas.
Thus, if a chemist collects 372 cm³ of gas over water at 90˚c and 111.0 kpa, 118.34 ml volume of the dry gas occupy at 2˚c and 98.0 kpa.
Learn more about gas, here:
https://brainly.com/question/31884731
#SPJ1
a 1.75 l l reaction vessel, initially at 305 k k , contains carbon monoxide gas at a partial pressure of 232 mmhg m m h g and hydrogen gas at a partial pressure of 388 mmhg
There is a mixture of carbon monoxide and hydrogen gases in a 1.75 litre reaction vessel at a temperature of 305 Kelvin. The partial pressure of carbon monoxide is 232 mmHg, while the partial pressure of hydrogen is 388 mmHg.
To calculate the total pressure of the mixture, we need to use the formula for Dalton's law of partial pressures, which states that the total pressure of a gas mixture is equal to the sum of the partial pressures of each gas in the mixture.
Total pressure = partial pressure of CO + partial pressure of H2
Total pressure = 232 mmHg + 388 mmHg
Total pressure = 620 mmHg
Therefore, the total pressure of the gas mixture in the reaction vessel is 620 mmHg.
Learn more about partial pressure here ;
https://brainly.com/question/29893343
#SPJ11
Which of the following molecules is expected to form hydrogen bonds in the pure liquid or solid phase: ethanol (CH2CH2OH), acetic acid (CH3CO2H), acetaldehyde (CH3CHO), and dimethyl ether (CH3OCH3)2 a. ethanol only b. acetaldehyde only c. ethanol and acetic acid d. acetaldehyde and dimethyl ether e. ethanol and dimethyl ether
The molecules expected to form hydrogen bonds in the pure liquid or solid phase are ethanol and acetic acid.
In the given options, ethanol (CH2CH2OH) and acetic acid (CH3CO2H) have hydroxyl (-OH) groups, which can form hydrogen bonds due to the high electronegativity of oxygen and the polar nature of the O-H bond. Hydrogen bonding is a type of intermolecular force that occurs when a hydrogen atom is covalently bonded to a highly electronegative atom (like oxygen or nitrogen) and interacts with another electronegative atom on a neighboring molecule. On the other hand, acetaldehyde (CH3CHO) and dimethyl ether (CH3OCH3) lack the O-H bond required for hydrogen bonding. Hence, the correct answer is c. ethanol and acetic acid.
know more about ethanol and acetic acid, here:
https://brainly.com/question/28169580
#SPJ11
We see below that 3-methyl-3-hexanol can be synthesized from the reaction of 2-pentanone with ethylmagnesium bromide.
What other combinations of ketone and Grignard reagent could be used to prepare the same tertiary alcohol?
The reaction of a ketone with a Grignard reagent is a classic example of nucleophilic addition to a carbonyl group.
The reaction of a ketone with a Grignard reagent is a classic example of nucleophilic addition to a carbonyl group. In this reaction, the Grignard reagent behaves as a strong nucleophile and attacks the electrophilic carbonyl carbon atom of the ketone. The product of this reaction is an alcohol, where the Grignard reagent has replaced the carbonyl group. To prepare 3-methyl-3-hexanol, the ketone 2-pentanone is reacted with ethylmagnesium bromide. However, other combinations of ketone and Grignard reagent can be used to prepare the same tertiary alcohol. For example, the ketone 3-pentanone can be reacted with butylmagnesium bromide to give 3-methyl-3-hexanol. Similarly, 4-pentanone can be reacted with propylmagnesium bromide or isopropylmagnesium bromide to give the same product. In general, any ketone with a suitable Grignard reagent can be used to prepare 3-methyl-3-hexanol, as long as the Grignard reagent has a carbon chain that is one carbon longer than the ketone. The reaction mechanism for all these reactions is the same, and the product is always a tertiary alcohol.
Reaction:
2-pentanone + ethylmagnesium bromide → 3-methyl-3-hexanol
3-pentanone + butylmagnesium bromide → 3-methyl-3-hexanol
4-pentanone + propylmagnesium bromide or isopropylmagnesium bromide → 3-methyl-3-hexanol
Grignard reagent: An organometallic compound that is formed by the reaction of an alkyl or aryl halide with magnesium metal.
To know more about Grignard reagent visit: https://brainly.com/question/31325385
#SPJ11
In the coordination compound [Co(en)2Cl2]Cl, the coordination number and oxidation number of the central atom are respectively,
A) 4, +3 B) 6, +2 C) 4, +2 D) 6, +3 E) 4, +1
If possible, please include a detailed solution to accompany your answer.
The coordination number is the number of ligands attached to the central metal ion. In this case, there are two ethylenediamine (en) ligands and two chloride (Cl) ligands, making a total of four ligands. Therefore, the coordination number is 4. To determine the oxidation number of the central metal ion, we can use the oxidation numbers of the ligands. The oxidation number of chloride is -1, and the overall charge of the compound is zero, so the oxidation number of cobalt (Co) must be: 2(en) x 0 + 2(Cl) x (-1) + x = 0 x = +2 Therefore, the oxidation number of the central metal ion (Co) is +2. So, the answer is C) 4, +2.
About OxidationIn chemistry, oxidation state is an indicator of the degree of oxidation of an atom in a chemical compound. The formal oxidation state is the hypothetical charge that an atom would acquire if all the bonds associated with that atom were completely ionic.
Learn More About Oxidation at https://brainly.com/question/25886015
#SPJ11
a gas syring contains 25ul of co2 at 1.0 atm pressure. what is the pressure inside the syringe when the plunger is depressed to 15ul
Therefore, when the plunger is depressed to 15ul, the pressure inside the syringe increases to 1.67 atm. It's important to note that this calculation assumes that the temperature remains constant. If the temperature were to change, the pressure would also change accordingly.
When the plunger is depressed to 15ul, the volume of the gas in the syringe decreases from 25ul to 15ul. However, the amount of gas remains constant, which means that the pressure inside the syringe will increase.
To calculate the new pressure, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the amount of gas (in moles), R is the gas constant, and T is the temperature.
Assuming that the temperature remains constant, we can rearrange the equation to solve for the new pressure:
P1V1 = P2V2
where P1 is the initial pressure (1.0 atm), V1 is the initial volume (25ul), P2 is the final pressure (unknown), and V2 is the final volume (15ul).
Plugging in the values, we get:
(1.0 atm)(25ul) = P2(15ul)
Solving for P2, we get:
P2 = (1.0 atm)(25ul)/(15ul) = 1.67 atm
to know more about ideal gas law visit:
https://brainly.com/question/6534096
#SPJ11
which is more stable: 16 protons, 16 neutrons, and 16 electrons when they are combined as two 16 o atoms or as one 32 s atom?
hello
the answer to the question is:
a dioxide bond which consists of two ¹⁶O or two oxygens (O2) is a strong stable bond
whereas a sulfide bond consisting of two ³²S or two sulfurs (S2) is not as strong of a bond due to its larger size compared to a dioxide bond
if you're comparing a dioxide molecule to an atom of sulfur, since sulfur naturally is less stable and more reactive, and oxygen bonded molecule either with another oxygen or hydrogen is more stable
in addition, atoms are less stable than molecules, hence a sulfur atom is less stable than a dioxide molecule
Which of the following is the best reducing agent?
Cl2 + 2e- → 2Cl- E° = 1.36 V
Mg 2+ + 2e- → Mg E° = -2.37 V
2H+ + 2e- → H2 E° = 0.00 V
A) Mg
B) H2
C) Cl-
D) Cl2
E) Mg
Option A) Mg is the coorect option.The best reducing agent among the given options is magnesium (Mg).
The reducing ability of a substance is determined by its tendency to lose electrons and be oxidized. A higher reduction potential (E°) indicates a greater tendency to be reduced and, therefore, a stronger reducing agent.
Looking at the reduction potentials provided:
Cl2 + 2e- → 2Cl- has a reduction potential of 1.36 V.
Mg 2+ + 2e- → Mg has a reduction potential of -2.37 V.
2H+ + 2e- → H2 has a reduction potential of 0.00 V.
A more negative reduction potential indicates a stronger reducing agent. Among the options given, magnesium (Mg) has the most negative reduction potential of -2.37 V. This means that magnesium has a strong tendency to lose electrons and is a powerful reducing agent. Therefore, the best reducing agent among the options provided is Mg (option A).
Learn about reducing agent here: https://brainly.com/question/2890416
#SPJ11
does decreasig the pressure in an exothermic reaction cause mroe products
Decreasing the pressure in an exothermic reaction generally does not cause more products to form.
The effect of pressure on the equilibrium and product formation in a chemical reaction depends on whether the reaction involves gases as reactants or products. In general, changes in pressure primarily affect reactions involving gases, particularly those with a change in the number of moles of gas during the reaction.
For exothermic reactions, decreasing the pressure will not favor the formation of more products. According to Le Chatelier's principle, when the pressure is decreased, the system will shift in the direction that reduces the number of gas molecules. In an exothermic reaction, the forward reaction is often accompanied by a decrease in the number of moles of gas. Therefore, decreasing the pressure will cause the equilibrium to shift towards the side with fewer moles of gas, which typically means the reactants.
However, it's important to note that the effect of pressure on a specific exothermic reaction may depend on other factors such as temperature, concentration, and the nature of the reactants and products. Different reactions may respond differently to changes in pressure, and a comprehensive analysis is necessary to determine the exact effect on product formation.
Learn more about exothermic reactions here: https://brainly.com/question/30135580
#SPJ11
125 mmHg = ____ atm
1.2 atm = ______ kPa
What happens to pressure when the volume is decreased? Increased?
What happens to volume when the temperature increases? Decreases?
Can someone please answer these 4 questions for me please please please!!! Also, can you also show how you got the answers for the first two problems? Thank you! (:
We can convert 125 mmHg to atm as shown below:
Pressure (in mmHg) = 125 mmHgPressure (in atm) = ?760 mmHg = 1 atm
Therefore,
125 mmHg = 125 / 760
125 mmHg = 0.164 atm
Thus, the 125 mmHg is equivalent to 0.164 atm
How do i convert 1.2 atm to KPa?We can convert 1.2 atm to KPa as shown below:
Pressure (in atm) = 1.2 atmPressure (in KPa) = ?1 atm = 101.325 KPa
Therefore,
1.2 atm = 1.2 × 101.325
1.2 atm = 121.59 KPa
Thus, the 1.2 atm is equivalent to 121.59 KPa
How do i know what will happen to the pressure?Boyle's law states that the pressure of a fixed mass of gas is inversely proportional to its volume provide the temperature of the gas remains constant.
With the above law, we can determine what will happen to the pressure as volume decreases and also as volume increase. This is shown below:
As volume decreased, the pressure will increaseAs volume increased, the pressure will decreaseHow do i know what will happen to the volume?Charles' law states that te volume of a fixed mass of gas is directly proportional to its absolute temperature at constant pressure.
With the above law, we can determine what will happen to the volume as temperature increase and also as temperature decreases. This is shown below:
As temperature increased, the volume will increaseAs temperature decreased, the volume will decreaseLearn more about conversion:
https://brainly.com/question/31954625
#SPJ1
the structure or shape at s and number of lone pairs on s in the cation [h2nsf2] (connectivity as written) are
the structure or shape at sulfur (S) in the cation [H₂NSF₂] is trigonal pyramidal, with one lone pair of electrons on sulfur.
the structure or shape of the sulfur atom (S) and the number of lone pairs on S in the cation [H₂NSF₂], we need to consider the Lewis structure and VSEPR theory.
The Lewis structure for [H₂NSF₂] can be represented as:
H H
| |
H - N - S - F
|
F
In this Lewis structure, the sulfur atom (S) is surrounded by two hydrogen atoms (H), one nitrogen atom (N), and two fluorine atoms (F).
Applying the VSEPR theory, we can determine the shape or structure around the central sulfur atom by considering the number of bonding and lone pairs of electrons around it.
The sulfur atom (S) is bonded to one nitrogen atom (N), two fluorine atoms (F), and has one lone pair of electrons.
Based on this, the shape around sulfur can be determined. The presence of one lone pair on S indicates that the electron pair geometry is trigonal pyramidal.
However, since there are no lone pairs on the other bonded atoms, the molecular geometry is the same as the electron pair geometry.
To know more about trigonal pyramidal refer here:
https://brainly.com/question/30459744#
#SPJ11
Of the molecules below; which ones undergo extensive hydrogen bonding? HzTe, HzS, H2O, HBr; HCL; HE; SiH4, CH4, HI; NHz, PHg, AsHz HBr; HCL HF; HzO CH4, HzO, HE; NH3 AsH3, NH3, HE, HzS HzO, HF; NH3 H2S, H2O, HCL HF
The molecules that undergo extensive hydrogen bonding are:
H2O (water): Water molecules can form extensive hydrogen bonding due to the presence of two hydrogen atoms bonded to the oxygen atom. Each water molecule can form hydrogen bonds with up to four neighboring water molecules, resulting in a network of interconnected hydrogen bonds.
NH3 (ammonia): Ammonia molecules contain a nitrogen atom bonded to three hydrogen atoms. The lone pair of electrons on the nitrogen atom can form hydrogen bonds with other ammonia molecules, leading to the formation of an extended hydrogen bonding network.
HF (hydrogen fluoride): Hydrogen fluoride molecules can engage in hydrogen bonding due to the electronegativity difference between hydrogen and fluorine. The fluorine atom's lone pair of electrons can form hydrogen bonds with neighboring HF molecules.
H2S (hydrogen sulfide): Hydrogen sulfide molecules can undergo hydrogen bonding to some extent. Although the electronegativity difference between hydrogen and sulfur is smaller compared to hydrogen and oxygen or nitrogen, it still allows for weak hydrogen bonding interactions.
Therefore, the molecules that undergo extensive hydrogen bonding are H2O (water) and NH3 (ammonia), while HF (hydrogen fluoride) and H2S (hydrogen sulfide) can also engage in hydrogen bonding to a lesser extent.
To know more about hydrogen bonding:
https://brainly.com/question/31139478
#SPJ1
The students examine an additional sample. The sample contains moving objects that each have a nucleus. The image shows the sample under the microscope.
Which statement correctly describes the sample?
A
The sample contains unicellular, living organisms.
B
The sample contains unicellular, nonliving objects.
C
The sample contains multicellular, living organisms.
D
The sample contains multicellular, nonliving objects.
The statement that correctly describes the sample is as follows: The sample contains multicellular, living organisms (option C).
What are living organisms?Living organisms are organisms characterized by the presence of life in them. The characteristics of life includes the following;
MovementRespirationReproductionIrritabilityGrowthExcretion etc.According to this question, students examine an additional sample and found it to contain moving objects that each have a nucleus. This suggest that the sample is made up of living organisms because they move.
Learn more about living organisms at: https://brainly.com/question/2273758
#SPJ1
Which changes would cause the reaction to become darker brown? View Available Hint(s) Decrease the volume of the container. Increase the pressure in the reaction vessel. Run the reaction at a higher temperature. Run the reaction at a lower temperature.
Running the reaction at a higher temperature would cause the reaction to become darker brown.
When a reaction is run at a higher temperature, the molecules have more kinetic energy, which leads to more frequent and energetic collisions between them.
This can cause the reaction to proceed faster and generate more product. In some cases, a faster reaction can also lead to the formation of byproducts, which can cause the color of the reaction mixture to change.
In this particular case, it's possible that the higher temperature could cause the reactants to react more readily and form products that are darker in color.
Decreasing the volume of the container or increasing the pressure in the reaction vessel would not necessarily cause the reaction to become darker brown.
These changes could potentially affect the rate of the reaction, but they are not likely to directly affect the color of the reaction mixture. Running the reaction at a lower temperature could slow down the reaction and potentially decrease the formation of byproducts, but it would not necessarily cause the reaction to become darker brown.
Visit here to learn more about kinetic energy:
brainly.com/question/8101588
#SPJ11
a chemist mixes potassium iodide with lead nitrate in solution. at what point is this reaction at dynamic equilibrium?
The reaction between potassium iodide and lead nitrate in solution, which produces potassium nitrate and lead iodide, can reach dynamic equilibrium when the rates of the forward and reverse reactions become equal. In other words, the concentrations of reactants and products no longer change over time.
To determine the specific point at which this reaction reaches dynamic equilibrium, we would need additional information such as the concentrations of the reactants and products, the reaction conditions (temperature, pressure, etc.), and the rate constants of the forward and reverse reactions.
Without this information, it is not possible to pinpoint the exact point at which the reaction reaches dynamic equilibrium. It would require a detailed understanding of the reaction kinetics and a thorough analysis of the experimental data to determine the equilibrium point.
Learn More About Reaction at https://brainly.com/question/11231920
#SPJ11
use the theoretical density approach, predict the density of carbon in a diamond cubic structure. the atomic mass of c is 12.011 g/mol and its lattice parameter in diamond form is 0.357 nm.
To predict the density of carbon in a diamond cubic structure, we can use the theoretical density approach, which involves calculating the mass of the unit cell and dividing it by the volume of the unit cell.
The diamond cubic structure consists of eight carbon atoms arranged in a three-dimensional lattice. Each carbon atom is bonded to four neighboring carbon atoms, forming a tetrahedral arrangement. The lattice parameter (edge length) of the unit cell is given as 0.357 nm.
To calculate the mass of the unit cell, we need to determine the number of carbon atoms in the unit cell and multiply it by the atomic mass of carbon. In the diamond cubic structure, there are eight carbon atoms per unit cell.
Number of carbon atoms in the unit cell = 8
Atomic mass of carbon (C) = 12.011 g/mol
Mass of the unit cell = 8 * 12.011 g/mol
Next, we need to calculate the volume of the unit cell. The volume of a cubic unit cell can be determined by raising the lattice parameter to the power of three.
Volume of the unit cell = (0.357 nm)^3
Now, we can calculate the density using the formula:
Density = Mass of the unit cell / Volume of the unit cell
Substituting the values:
Density = (8 * 12.011 g/mol) / (0.357 nm)^3
It's important to note that we need to convert the units to a consistent system. Converting nm to cm, we have:
Density = (8 * 12.011 g/mol) / (0.0357 cm)^3
Calculating this expression will give us the density of carbon in a diamond cubic structure.
Know more about density of carbon here:
https://brainly.com/question/14102227
#SPJ11
from what kinds of interactions do intermolecular forces originate
Intermolecular forces originate from the interactions between molecules, and these interactions arise from the electric charges of atoms and molecules.
The electron clouds around the atoms and molecules are constantly in motion, and as they move, they create temporary dipoles or partial charges. These temporary dipoles or partial charges attract or repel other nearby molecules or atoms, creating intermolecular forces.
There are three primary types of intermolecular forces: London dispersion forces, dipole-dipole interactions, and hydrogen bonding.
London dispersion forces are the weakest intermolecular force and arise from the temporary dipoles created by the electron cloud movement.
Dipole-dipole interactions occur between molecules that have a permanent dipole moment, meaning they have a partial positive and partial negative charge on different ends of the molecule.
Hydrogen bonding is a type of dipole-dipole interaction that occurs between molecules with a hydrogen atom bonded to a highly electronegative atom, such as oxygen, nitrogen, or fluorine.
The strength of intermolecular forces depends on several factors, including the size and shape of the molecules, the strength of the molecular dipole moments, and the polarity of the molecules.
To know more about intermolecular force refer here:
https://brainly.com/question/29773695?#
#SPJ11
Write the balanced oxidation half-reaction shown below given that it is in acidic solution.
Ti→Ti2+
Provide your answer below
In this reaction, Titanium (Ti) is oxidized, losing two electrons (2e-) to form Ti2+. The equation is balanced with respect to both atoms and charges.
To balance the oxidation half-reaction for the conversion of Ti to Ti2+ in acidic solution, we need to consider the change in oxidation states and balance the number of atoms and charges on both sides of the equation.
The balanced oxidation half-reaction is as follows:
Ti -> Ti2+ + 2e-
In this reaction, Titanium (Ti) is oxidized, losing two electrons (2e-) to form Ti2+. The equation is balanced with respect to both atoms and charges.
Note: The state of the species (solid or aqueous) is not specified in the equation since we are only concerned with balancing the oxidation half-reaction.
Learn more about Titanium here:
https://brainly.com/question/8028003
#SPJ11
A combustion of 1.00 mol of propane, C₃H₈, results in the release of 2220 kJ of heat. How much propane (in grams) must be combusted to provide energy needed to convert 5.50 kg of ice at -50°C to vapor at 100°C? Specific heat of ice is 2.09 J/(g.°C) and that of liquid water is 4.18 J/(g.°C).
Heat of fusion is 334 J/g and heat of vaporization is 2.26 kJ/g.
The answer can be written in 125 words or less the molar mass of propane (C₃H₈) is 44.10 g/mol. The total energy required is the sum of Q₁, Q₂, and Q₃. Since the combustion of 1.00 mol of propane releases 2220 kJ of heat
To calculate the amount of propane needed, we need to determine the total energy required to convert 5.50 kg of ice at -50°C to vapor at 100°C. The energy required can be calculated in three steps:
Heating the ice from -50°C to 0°C:
The heat absorbed can be calculated using the equation Q = m × C × ΔT, where Q is the heat absorbed, m is the mass, C is the specific heat, and ΔT is the temperature change. Substituting the given values, we have Q₁ = 5.50 kg × 2.09 J/(g·°C) × (0°C - (-50°C)).
Melting the ice at 0°C:
The heat absorbed during melting can be calculated using the equation Q = m × Hf, where Q is the heat absorbed, m is the mass, and Hf is the heat of fusion. Substituting the given values, we have Q₂ = 5.50 kg × 334 J/g.
Heating the liquid water from 0°C to 100°C:
The heat absorbed can be calculated using the equation Q = m × C × ΔT. Substituting the given values, we have Q₃ = 5.50 kg × 4.18 J/(g·°C) × (100°C - 0°C).
The total energy required is the sum of Q₁, Q₂, and Q₃. Since the combustion of 1.00 mol of propane releases 2220 kJ of heat, we can set up a proportion to find the mass of propane required. The proportion is:
(2220 kJ / 1 mol) = (x g propane / molar mass of propane)
Rearranging the equation and substituting the molar mass of propane, we can solve for x to find the mass of propane required in grams. The total energy required is the sum of Q₁, Q₂, and Q₃. Since the combustion of 1.00 mol of propane releases 2220 kJ of heat.
For more such questions on mass
https://brainly.com/question/837939
#SPJ11
which ion would you expect to have the largest crystal field splitting δ? [is(nh3)6]2 [os(nh3)6]3 [os(cl)6]3- [os(cn)6]4- [os(cn)6]3-
Among the given ions, [Os(CN)6]3- would be expected to have the largest crystal field splitting δ.
Crystal field splitting refers to the energy difference between the d orbitals in a transition metal ion when it is surrounded by ligands in a crystal field. The strength of the crystal field splitting, denoted as δ, depends on the nature of the ligands and their arrangement around the metal ion.
In general, ligands that are more strongly interacting with the metal ion result in a larger crystal field splitting. This is because these ligands exert a greater influence on the d orbitals, causing them to split further apart in energy.
Among the given ions:
- [Os(NH3)6]2+ and [Os(NH3)6]3+ both have ammonia (NH3) ligands. The difference between these ions is the oxidation state of osmium (Os). Since the oxidation state does not affect the ligand strength, the crystal field splitting would be similar for both ions.
- [Os(Cl)6]3- has chloride (Cl-) ligands, which are typically weaker field ligands compared to ammonia. Consequently, the crystal field splitting for this ion would be smaller than for the ammonia complexes.
- [Os(CN)6]4- and [Os(CN)6]3- both have cyanide (CN-) ligands. Cyanide ligands are known to be strong field ligands, meaning they interact strongly with the metal ion. As a result, the crystal field splitting for these complexes would be larger compared to the other ions mentioned.
To know more about Crystal refer here
https://brainly.com/question/32130991#
#SPJ11
What is the ΔH of the following hypothetical reaction? 2A(s) + B2(g) → 2AB(g)
Given: A(s) + B2(g) → AB2(g) ΔH = -116.6 kJ
2AB(g) + B2(g) → 2AB2(g) ΔH = -777.2 kJ
Enter your answer in decimal notation rounded to the appropriate number of significant figures.
The ΔH of the reaction 2A(s) + B2(g) → 2AB(g) is +272.0 kJ.To find the ΔH of the reaction 2A(s) + B2(g) → 2AB(g), we can use Hess's law, which states that the overall enthalpy change of a reaction is the sum of the enthalpy changes of the individual steps.
First, we'll reverse the second equation:
2AB(g) + B2(g) → 2AB2(g) (reversed) ΔH = +777.2 kJ
Now, we can manipulate the given equations to obtain the target reaction:
A(s) + B2(g) → AB2(g) ΔH = -116.6 kJ
2AB(g) + B2(g) → 2AB2(g) ΔH = +777.2 kJ
To obtain the target reaction, we need to cancel out B2(g) in the second equation. Therefore, we'll multiply the first equation by 2 and add it to the second equation:
2(A(s) + B2(g) → AB2(g)) ΔH = 2(-116.6 kJ)
2AB(g) + B2(g) → 2AB2(g) ΔH = +777.2 kJ
2A(s) + 2B2(g) → 2AB2(g) ΔH = -233.2 kJ + 777.2 kJ
Simplifying the equation:
2A(s) + 2B2(g) → 2AB2(g) ΔH = +544.0 kJ
Since we're looking for the reaction 2A(s) + B2(g) → 2AB(g), we need to divide the enthalpy change by 2 (since the coefficient of B2(g) in the target reaction is 1, not 2):
(2A(s) + 2B2(g) → 2AB2(g)) ΔH = +544.0 kJ
(2A(s) + B2(g) → 2AB(g)) ΔH = +544.0 kJ ÷ 2 = +272.0 kJ
Therefore, the ΔH of the reaction 2A(s) + B2(g) → 2AB(g) is +272.0 kJ.
Learn more about enthalpy here:
https://brainly.com/question/29145818
#SPJ11
calculate the ph of a 0.089 m solution of ca(oh)2. remember that a ph with three decimal places has three significant figures. make sure to enter your answer with three decimal places. you answered
The pH value of a 0.089 M solution of Ca(OH)₂ is roughly 13.251, rounded to three decimal places.
How to calculate the pH of a 0.089 M solution of Ca(OH)₂Step 1: Determine the concentration of OH⁻ ions.
The chemical equation for calcium hydroxide Ca(OH)₂ in solution is:
Ca(OH)₂ → Ca²⁺ + 2OH⁻Ca(OH)₂ dissociates into Ca²⁺ and 2 OH⁻ ions. So, the concentration of OH⁻ ions will double the concentration of Ca(OH)₂.
OH⁻ concentration = 2 × 0.089 M = 0.178 M
Step 2: Calculate the pOH.
pOH = -log(OH⁻ concentration) = -log(0.178)
pOH ≈ 0.749
Step 3: Find the pH using the relationship between pH and pOH.
pH + pOH = 14
pH = 14 - pOH
Now, using a calculator or logarithm table, calculate the pOH and then the pH:
pOH ≈ 0.749
pH = 14 - 0.749 = 13.251
So, the pH of the 0.089 M solution of Ca(OH)₂ is approximately 13.251 with three decimal places.
practice and learn more about pH and pOH
https://brainly.com/question/13557815
#SPJ11
which compound contains a chiral carbon atom? view available hint(s) for part a 2-bromopentane 3-chloropentane 3-bromopentane 2-bromopropane
A chiral carbon atom is a carbon atom that is attached to four different groups.
A molecule containing a chiral carbon atom will exist in two different forms that are mirror images of each other, known as enantiomers.
The compound that contains a chiral carbon atom is 3-bromopentane.
This is because the carbon atom in question is bonded to four different groups: a hydrogen atom, a methyl group, an ethyl group, and a bromine atom.
In contrast, 2-bromopentane, 3-chloropentane, and 2-bromopropane do not contain chiral carbon atoms since the carbon atoms in question are bonded to only three different groups.
To know more about chiral carbon refer here
brainly.com/question/30899533#
#SPJ11
what is the solubility of barium sulfate in a solution containing 0.050 m sodium sulfate? the ksp value for barium sulfate is 1.1 × 10-10.
The solubility of barium sulfate in a solution containing 0.050 M sodium sulfate can be determined using the concept of the solubility product constant (Ksp).
The solubility product constant (Ksp) is an equilibrium constant that describes the equilibrium between a solid compound and its dissolved ions in a solution. For barium sulfate (BaSO4), the Ksp value is given as 1.1 × 10^-10. The Ksp expression for barium sulfate is:
Ksp = [Ba2+][SO42-]
In the given solution, sodium sulfate (Na2SO4) is present at a concentration of 0.050 M. Since sodium sulfate is a soluble salt, it dissociates completely in water to form sodium ions (Na+) and sulfate ions (SO42-). The concentration of sulfate ions in the solution is therefore also 0.050 M.
To determine the solubility of barium sulfate, we assume that it fully dissociates in the solution. Let's represent the solubility of barium sulfate as "x". Therefore, the concentration of barium ions (Ba2+) and sulfate ions (SO42-) will both be "x".
Substituting these values into the Ksp expression:
Ksp = [Ba2+][SO42-]
1.1 × 10^-10 = x * x
From this equation, we can solve for "x" to determine the solubility of barium sulfate in the given solution containing 0.050 M sodium sulfate.
Learn more about solubility, below:
https://brainly.com/question/22185953
#SPJ11
hydrogen f uoride is used in the manufacture of freons (which destroy ozone in the stratosphere) and in the production of aluminum metal. it is prepared by the reaction caf2
I apologize, but there seems to be an error in your statement. Hydrogen fluoride (HF) is not used in the manufacture of freons, which are chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs).
These compounds contain chlorine and/or bromine atoms, not fluorine. CFCs and HCFCs are known for their detrimental effects on the ozone layer.
However, hydrogen fluoride is used in the production of aluminum metal through a process called aluminum smelting.
In this process, aluminum oxide (Al2O3) is mixed with a molten mixture of cryolite (Na3AlF6) and fluorite (CaF2) to lower the melting point of the aluminum oxide.
The addition of hydrogen fluoride helps dissolve the aluminum oxide, allowing for the extraction of pure aluminum.
Please note that the use of hydrogen fluoride should be handled with caution, as it is a highly corrosive and toxic substance. Safety precautions and appropriate handling procedures must be followed when working with hydrogen fluoride.
To know more about chlorofluorocarbons refer here
brainly.com/question/10249762#
#SPJ11
an atom of 85ga has a mass of 84.957005 amu. mass of1h atom = 1.007825 amu mass of a neutron = 1.008665 amu calculate the binding energy in kilojoule per mole.
The binding energy of an atom of 85Ga can be calculated by subtracting the total mass of its constituent particles from its actual measured mass.
The binding energy of an atom represents the energy required to break it apart into its constituent particles. To calculate the binding energy of 85Ga, we need to determine the mass defect, which is the difference between the actual measured mass of the atom and the sum of the masses of its constituent particles. The mass defect is caused by the conversion of mass into energy according to Einstein's mass-energy equivalence principle (E = mc^2).
First, we calculate the total mass of the constituent particles by multiplying the mass of a proton (1.007825 amu) by the number of protons (Z) and adding it to the mass of a neutron (1.008665 amu) multiplied by the number of neutrons (N). The number of electrons (E) is equal to the number of protons (Z) since the atom is neutral.
Next, we subtract the total mass of the constituent particles from the measured mass of 85Ga (84.957005 amu) to obtain the mass defect.
Finally, we multiply the mass defect by the conversion factor (c^2) to obtain the binding energy in joules per atom. To convert it to kilojoules per mole, we multiply the binding energy by Avogadro's number.
Learn more about binding energy, below:
https://brainly.com/question/31817434
#SPJ11
To understand galvanic cells, let's start with a familiar idea: oxidation-reduction (redox) reactions. This animation demonstrates a reaction of copper metal in a copper sulfate solution with an imaginary electron source
In this animation, are the Cuions in the solution being reduced or oxidized?
In this case, the copper ions are gaining two electrons to form copper metal. Therefore, the copper ions are undergoing reduction.
Why the the copper metal loses two electrons?In the animation, the copper metal (Cu) is initially in its solid state, while the copper sulfate solution contains copper ions (Cu²⁺) and sulfate ions (SO₄²⁻).
During the reaction, the copper metal loses two electrons (e⁻) and transforms into copper ions (Cu²⁺). This process is known as oxidation. Oxidation involves the loss of electrons from a species.
At the same time, an imaginary electron source (which is not shown in the animation) supplies two electrons to the copper ions present in the solution. This electron transfer to the copper ions causes them to gain electrons and reduces them to copper metal. This reduction process involves the gain of electrons by a species.
Overall, the reaction can be summarized as follows:
Oxidation half-reaction: Cu(s) → Cu²⁺(aq) + 2e⁻
Reduction half-reaction: Cu²⁺(aq) + 2e⁻ → Cu(s)
By combining the oxidation and reduction half-reactions, we get the balanced redox equation:
Cu(s) + Cu²⁺(aq) → 2Cu(s)
This balanced equation represents the net reaction, where copper metal reacts with copper ions to form an electrode made of solid copper. This process occurs in a galvanic cell, where the transfer of electrons drives an electric current.
Learn more about copper ions
brainly.com/question/28609736
#SPJ11
What is the molar mass of a sugar, if a solution of 1. 4 g of the sugar in 0. 20 L of solution has an osmotic pressure of 3. 5 atm at 37âC?
Use R=0. 08206L atmmol K in your calculation.
Report your answer with two significant figures
We also need to report our answer with two significant figures, so we will report the molar mass as 0.0126 g/mol.
The molar mass of the sugar, we can use the osmotic pressure of the solution and the molar mass of the solute (sugar) to calculate the molar concentration of the solution.
First, we need to convert the mass of the sugar to moles using the molar mass and the density of the sugar solution.
Moles of sugar = Mass of sugar / Molar mass of sugar
Moles of sugar = 1.4 g / 180.17 g/mol = 0.0077 mol
Next, we can use the molar concentration and the osmotic pressure to calculate the molar mass of the sugar using the formula:
Molar mass of sugar = (moles of solute x molar mass of solute) / molar concentration
Molar mass of sugar = (0.0077 mol x 180.17 g/mol) / 3.5 atm
Molar mass of sugar = 0.0126 g/mol
Therefore, the molar mass of the sugar is approximately 0.0126 g/mol.
Learn more about molar mass visit: brainly.com/question/837939
#SPJ4
describe how the kidneys respond to a chronic decrease in oxygen
When the kidneys detect a chronic decrease in oxygen, they initiate a series of physiological responses to restore oxygen balance and maintain homeostasis.
The primary mechanism by which the kidneys respond to low oxygen levels is through the release of a hormone called erythropoietin (EPO). EPO stimulates the production of red blood cells in the bone marrow, increasing the oxygen-carrying capacity of the blood.
In response to chronic hypoxia, the kidneys produce and release more EPO, which enters the bloodstream and travels to the bone marrow. EPO then stimulates the differentiation and proliferation of red blood cell precursors, leading to an increased production of mature red blood cells. This response helps to enhance oxygen delivery to tissues and organs throughout the body.
Additionally, the kidneys play a role in regulating blood pressure. In situations of chronic hypoxia, the kidneys can activate the renin-angiotensin-aldosterone system (RAAS) to increase blood volume and improve tissue perfusion. This mechanism involves the release of renin, an enzyme that initiates a series of reactions leading to the production of angiotensin II, a potent vasoconstrictor. Angiotensin II stimulates the release of aldosterone, which promotes sodium and water retention, leading to increased blood volume and elevated blood pressure.
Overall, the kidneys respond to chronic hypoxia by increasing erythropoiesis through the release of EPO and by activating the RAAS to regulate blood pressure and optimize tissue perfusion. These responses help to restore oxygen balance and ensure adequate oxygen supply to the body's tissues and organs.
Know more about Kidney here:
https://brainly.com/question/28021240
#SPJ11
Ammonium nitrate decomposes explosively upon heating according to the following balanced equation:
2NH4NO3(s)→2N2(g)+O2(g)+4H2O(g)
Calculate the total volume of gas (at 120 ∘C and 766 mmHg ) produced by the complete decomposition of 1.44 kg of ammonium nitrate.
Answer:
PV=nRT0.988×V=76.56×0.0821×394V=2506.6 L
Explanation:
• amount of ammonium nitrate present is m = 1.75 kg = 1750g.
• corruption of ammonium nitrate upon heating
Reaction 2NH4NO3( s) ⟶ 2N2( g) O2( g) 4H2O( g)
Molar Mass M 80 g/mol
StoichiometricCoefficient( n) 2 2 1 4
Stoichiometric Mass m = ( n × M) ( 2 × 80) g = 160 g
From the stoichiometric mass we have 160 g of ammonium nitrate produces( 2 1 4) intelligencers ie 7 moles of gas.
thus we have number of intelligencers of feasts evolved from 1750 g of ammonium nitrate equal to
n = 7/160 × 1750 moles= 76.56 moles
• Pressure of the gases are
• P = 751 mmHg = 0.988 atm
Note 1 atm = 760 mmHg.
• Temperature of the gases are
T = 121oC = 394 K
Let the volume of feasts produced be V.
From the ideal gas equation we've
PV = nRT
0.988 × V = 76.56 ×0.0821 × 394
V = 2506.6 L
Which of the following compounds are expected to be ionic Select all that apply CsBr HBr Na2S AsBr3
Among the given compounds, CsBr and Na2S are expected to be ionic, while HBr and AsBr3 are not.
Ionic compounds are formed through the transfer of electrons from a metal to a nonmetal. This occurs when there is a significant difference in electronegativity between the two elements.
CsBr (Cesium Bromide) consists of the metal cesium (Cs) and the nonmetal bromine (Br). Cesium has a low electronegativity, while bromine has a high electronegativity, resulting in the transfer of an electron from cesium to bromine.
Similarly, Na2S (Sodium Sulfide) involves the metal sodium (Na) and the nonmetal sulfur (S). Sodium has a low electronegativity, and sulfur has a relatively high electronegativity, leading to the formation of an ionic compound.
On the other hand, HBr (Hydrogen Bromide) and AsBr3 (Arsenic Tribromide) are not expected to be ionic.
HBr is a diatomic molecule consisting of two nonmetals, hydrogen (H) and bromine (Br).
The electronegativity difference between hydrogen and bromine is not large enough to result in ionic bonding.
AsBr3 consists of a central atom of arsenic (As) bonded to three bromine atoms (Br). Both arsenic and bromine are nonmetals, and the electronegativity difference between them is not significant for ionic bonding.
Therefore, CsBr and Na2S are the compounds expected to be ionic among the given options.
To know more about refer compounds here
brainly.com/question/27513728#
#SPJ11