Answer:
We know the initial volume of the potassium nitrate solution is 1.0 mL and the initial concentration is 2.0 M, we also know that an unknown volume of water was added to the solution, which diluted our concentration down to a final value of 0.008 M. We are trying to find the final volume.
Here we can use this formula since the initial and final solutions are proportional. Before that let's define our variables.
[tex]M_1 = 2.0 M\\V_1 = \frac{1.0 mL}{1000} = 0.001 L\\M_2 = 0.008 M\\V_2 = \ ?[/tex]
[tex]M_{1}V_{1} =M_2 V_2\\[/tex]
[tex](2.0)(0.001) = (0.008)V_2\\\\\frac{(2.0)(0.001)}{0.008} = V_2\\\\V_2 = 0.25 L \ or \ (0.25 \ * \ 1000) = 250 \ mL[/tex]
Therefore you would have 0.25 L or 250 mL of your final solution.
250 mL of argon gas is held in a flexible vessel shown above. If
the pressure changes to 12.0 atm, what is the new volume of
the gas at 20°C?
The new volume of the gas at 20 °C is 205 mL
From the question given above, the following data were obtained:
Initial volume (V₁) = 250 mL Initial pressure (P₁) = 10 atmInitial temperature (T₁) = 25 °C = 25 + 273 = 298 KNew pressure (P₂) = 12 atmNew temperature (T₂) = 20 °C = 20 + 273 = 293 KNew volume (V₂) =?With the application of the combine gas equation, we can obtain the new volume of the gas as illustrated below:
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{10 \times 250}{298} = \frac{12 \times V_2}{293} \\ \\ \frac{2500}{298} = \frac{12 \times V_2}{293} \\ \\ cross \: multiply \\ \\ 298 \times 12 \times V_2 = 2500 \times 293 \\ \\ divide \: both \: side \: by \: 298 \times 12 \\ \\ V_2 = \frac{2500 \times 293}{298 \times 12} \\ \\ V_2 = 205 \: mL \\ [/tex]
Therefore, the new volume of the gas is 205 mL
Learn more about gas laws: https://brainly.com/question/6844441
The new volume of the gas at the given pressure and temperature is 205 mL.
The given parameters:
Initial volume of argon, V₁ = 250 mLInitial pressure of gas, P₁ = 10 atmFinal pressure of the gas, P₂ = 12 atmInitial temperature of the gas, T₁ = 25 ⁰C = 273 + 25 = 298 KFinal temperature of the gas, T₂ = 20 ⁰C = 273 + 20 = 293 KThe new volume of the gas is calculated by applying general gas equation as follows;
[tex]\frac{V_1 P_1}{T_1} = \frac{V_2P_2}{T_2} \\\\V_2 = \frac{V_1P_1 T_2}{T_1P_2} \\\\V_2 = \frac{(250\ mL) \times 10 \times 293}{298 \times 12} \\\\V_2 = 204.84 \ mL\\\\v_2 = 205 \ mL[/tex]
Thus, the new volume of the gas at the given pressure and temperature is 205 mL.
Learn more about general gas equation here:
A sample of ethanol (C2H6O) has a mass of 0. 2301 g. Complete combustion of this sample causes the temperature of a bomb calorimeter to increase by 1. 33°C. The calorimeter has a mass of 2. 000 kg and a specific heat of 2. 45 J/g•°C. What is the heat of combustion for this sample? kJ.
The heat of combustion of the sample is calculated to be -1300 kJmol-1.
We know that energy is neither created nor destroyed but is converted from one form to another. The heat lost by the ethanol when it is burnt is equal to the heat gained by the calorimeter.
Heat gained by calorimeter = 2.×10^3 g × 2. 45 Jg-1°C-1 × 1. 33°C
= 6.5 kJ
Number of moles of ethanol = 0. 2301 g/46 g/mol = 0.005 moles
Heat of combustion of the sample = -( 6.5/0.005 moles) = -1300 kJmol-1
Learn more: https://brainly.com/question/17638582
what is the Conversion of products into reactants
Answer:
In a chemical reaction, substances (elements and/or compounds) called reactants are changed into other substances (compounds and/or elements) called products. You can't change one element into another in a chemical reaction — that happens in nuclear reactions.
Explanation:
Explanation:
Thus, reactions in which products can be converted to reactant is called Reversible reaction.
2KClO3 —> 2KCl2+ 3O2
true if balanced or false if not
reaction type 1: synthesis, 2: decomposition, 3: single replacement, 4: double replacement, 5: combustion
Answer:
False. The balanced equation should be
2KClO3-->2KCl + 3O2
it is a decomposition reaction.
3. Type: MT
Match the term to the correct definition
1. Homogeneous mixture
a. same throughout
2. Heterogeneous mixture
b. different throughout
Homogeneous mixture - same throughout
Heterogeneous mixture - different throughout
Answer: Homogeneous Mixture : B(different throughout)
Heterogeneous Mixture : A(same throughout)
How many Hydrogen atoms are required to satisfy Oxygen during bonding
Answer:
2 hydrogen atoms
Explanation:
The percent of attacks on the dark-colored mouse models is how many times greater than the percent of attacks on light-colored models
The number of times the percentage of attacks on the dark-colored mouse is greater than the percentage of attacks on light-colored mouse is four (4) times.
Let the percent of attacks on the dark-colored mouse be D.Let the percent of attacks on light-colored mouse be L.Given the following data:
Light-colored mouse models = 20 percentDark-colored mouse models = 80 percentTo determine the number of times the percentage of attacks on the dark-colored mouse is greater than the percentage of attacks on light-colored mouse.
Therefore, we would simply divide the percentage for the dark-colored mouse by the percentage for the light-colored mouse as follows:
[tex]Number \;of\;times = \frac{D}{L}[/tex]
Substituting the given parameters into the formula, we have;
[tex]Number \;of\;times = \frac{80}{20}[/tex]
Number of times = 4 times.
Read more on percentage here: https://brainly.com/question/14432715
The electron-domain geometry of a sulfur-centered compound is trigonal bipyramidal. The hybridization of the central sulfur atom is ________.
The hybridization state of the central sulfur atom is sp3d.
The valence shell electron pair repulsion theory describes the shape of molecules in terms of the number of electron pairs that surround the valence shell of the central atom in the molecule.
There are certain molecular shapes that are associated with certain hybridization states of the central atom. Since the central sulfur atom is trigonal bipyramidal, the hybridization state is sp3d.
Learn more: https://brainly.com/question/13978941
Deval drew the models of particles in a substance shown below. Which model best represents the particles in solid
Answer:
it would be the second one thank me later
Explanation:
On the spectrum, which section has the longest wavelength and the shortest wavelength? (2 answers for this question)
Answer:
Radio waves, infrared rays, visible light, ultraviolet rays, X-rays, and gamma rays are all types of electromagnetic radiation. Radio waves have the longest wavelength, and gamma rays have the shortest wavelength.Hope i help youChoose the best answer.
What is the sum?
2/3+7/15
O 14/15
O1/2
O1 2/15
O3/5
Answer:
1 2/15
Explanation:
2/3 + 7/15 = 17/15 =1 2/15
28) what is the number of oxygen atoms in the formula unit of Ca3(PO4)2?
Answer:
4.816x10²⁴atoms
Explanation:
the number of moles of oxygen is 8
let x be number of oxygen atoms
recall that 1 mole=6.02x10^23 atoms
therefore, 8 moles =x
cross multiply
8 x 6.02 x 10^23 = x
x = 4.816 x 10²⁴atoms
Difference between Laboratory Thermometer and Clinical Thermometer.
Explanation:
Can you please mark me the brillantest?
The electron configuration of a cation with a 2+ charge is shown below.
1s22s22p63s23p6
What is the electron configuration for the ion's neutral parent atom? The atom is a main group
element. Name the group that the parent atom likely belongs to on the Periodic Table and identify
one chemical property of the parent atom.
The electron configuration for the ion's neutral parent atom is
1s²2s²2p⁶3s²3p⁶4s²
It belongs to group 2 on the periodic table and one of its chemical properties is, it has a density of 1.54 g/cm³
From the question,
The cation has a charge of 2+. This means the neutral atom lost 2 electrons.
From the given electron configuration, the cation has 18 electrons.
Therefore, the neutral atom of ion will have 20 electrons.
∴ The electron configuration for the ion's neutral parent atom is
1s²2s²2p⁶3s²3p⁶4s²
The atom belongs to group 2 on the periodic table.
One chemical property of the parent atom
Its density is 1.54 g/cm³
Hence, The electron configuration for the ion's neutral parent atom is
1s²2s²2p⁶3s²3p⁶4s²
It belongs to group 2 on the periodic table and one of its chemical properties is, it has a density of 1.54 g/cm³
Learn more here: https://brainly.com/question/6762908
Which of the following is true for the percentage yield of a reaction?
А. It is the combined yield from the excess reactant and the limiting reactant.
B. It is the calculated yield of the product based on stoichiometry alone.
C. It is calculated based on stoichiometry as well as experimentation.
D. It is the yield of the product from the limiting reactant alone.
Answer:
It is always less than the theoretical yield
Explanation:
For many chemical reactions, the actual yield is usually less than the theoretical yield. This is due to possible loss in the process or inefficiency of the chemical reaction.
Given the speed of light as 3.00 x 10° m/s, calculate the
wavelength of the electromagnetic radiation whose frequency
is 9.500 x 101° Hz.
Answer:
the answer is mabye 30 I didnt understand
I get it! Now I know that an organism's traits
are controlled by ____________
Answer:
Genes mainly, however the environment as well
Explanation:
1.The two green substances are not same thing because some of their properties are different and some of them are the same. If they were the same substance, all of their properties would have to be the same.
How could the explanation be improved?
Answer:
Even though the two substances possess many similarities, they have some unique properties. In turn, since they have the same properties, if they were the same substance, it would make matters worse, if the same chemical was in two different places, there would not be a difference between them since they are the same, just as it is with are two different chemicals would have differing properties since they are two properties would vary from one another since they are 2 totally different things!
Explanation:
which of the following contains a covalent bond?
A) BeO
B) LiCI
C) CN
D) MgO
Answer= C) CN contains a covalent bond.
The chemical equation below shows the burning of magnesium (Mg) with oxygen (O2) to form magnesium oxide (MgO). 2Mg O2 Right arrow. 2MgO The molar mass of O2 is 32. 0 g/mol. What mass, in grams, of O2 is required to react completely with 4. 00 mol of Mg? 2. 00 64. 0 128 256.
Answer:
is the hoodie oh ok with that being a good day to be a good time with my friends and I have exam next to me that I am a very happy to be the best of the day
and
he is the best way possible for me
The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.
The balanced equation for the reaction has been:
[tex]\rm 2\;Mg\;+\;O_2\;\rightarrow\;2\;MgO[/tex]
From the balanced chemical equation, for complete utilization of 2 moles of Mg, 1 moles of oxygen has been used.
The given moles of Mg has been 4 mol. The moles of oxygen required can be given as:
[tex]\rm 2\;mol\;Mg=1\;mol\;O_2\\4\;mol\;Mg=2\;mol\;O_2[/tex]
Thus, the moles of oxygen required has been 2 mol for complete utilization of 4 mol Mg.
The mass from moles can be calculated as:
[tex]\rm Mass=Moles\;\times\;molecular\;mass[/tex]
The molecular mass of oxygen has been 32 g/mol.
The mass of oxygen has been:
[tex]\rm Mass=2\;\times\;32\;g\\Mass=64\;g[/tex]
The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.
For more information about the chemical equation,refer to the link:
https://brainly.com/question/20492533
How do vascular plants get the water and minerals they need to live?
through de' la' dasini
All three types of rock form in which earth layer?
Answer:
Lithosphere
Explanation:
All three types of rock make up the Earth's lithosphere, the outermost layer. The lithosphere averages about 100 kilometers in thickness.
In which of the following reactions is chlorine (Cl) oxidized? Br2 2Cl⒠→ Cl2 2Br⒠Cl2 2e⒠→ 2Cl⒠2ClO3⒠12H → Cl2 6H2O 2Na Cl2 → 2NaCl.
The reaction in which Cl has been oxidized is [tex]\rm Br_2\;+\;2\;Cl^-\;\rightarrow\;Cl_2\;+\;2\;Br^-[/tex]. Thus, option A is correct.
In a reaction, the oxidation has been defined as the loss of electrons by the atom, while reduction has been depicted as the gain of electrons.
The loss of electrons imparts a positive charge to the atom, while the gain of electrons imparts a negative charge to the atom.
In the following reactions, the Cl has been given as:
[tex]\rm Br_2\;+\;2\;Cl^-\;\rightarrow\;Cl_2\;+\;2\;Br^-[/tex]The chlorine has loses the electron and is converted to diatomic molecule. Thus, the Cl has been oxidized. The oxidation state of Cl has also been increased from -1 to 0.
[tex]\rm Cl_2\;+\;2\;e^-\;\rightarrow\;2\;Cl^-[/tex]The chlorine gains 2 electrons in the reaction and has been reduced.
[tex]\rm 2\;ClO_3^-\;+\;12\;H^+\;\rightarrow\;Cl_2\;+6\;H_2O[/tex]There has been no change in the oxidation state of chlorine. Thus, Cl has not been oxidized.
[tex]\rm 2\;Na\;+\;Cl_2\;\rightarrow\;2\;NaCl[/tex]The chlorine gains electron and has been converted to the Cl ion. With the gain of electrons, Cl has been reduced.
The reaction in which Cl has been oxidized is [tex]\rm Br_2\;+\;2\;Cl^-\;\rightarrow\;Cl_2\;+\;2\;Br^-[/tex]. Thus, option A is correct.
For more information about oxidation, refer to the link:
https://brainly.com/question/11507294
Help this is due today!!!
Answer:
a) Fe
b) Fe
c) Fe
Explanation:
When using their stoichiometric ratios, in all of the the iron will run out before the oxygen, making the iron the limiting reactant.
Two goldfish different parents.One fish has a split tail and the other does not.Why do the goldfish have tails with different shapes?
a.Each goldfish has a different tail shape because offspring from different parents will have different tail shapes.
b.Each goldfish has a different tail shape because they have different versions of the gene for tail shape that connect together to make different tail shapes.
c.The goldfish have different versions of the gene for tail shape.The genes are split inside one goldfish's tail but not inside the other's
The goldfish have different versions of the gene for tail shape,which instuct for different proteins that connect in different ways to make different tail shapes.
Answer:
A I believe is your best choice.
Explanation:
The boiling points of different substances are given in the table below. Substance Boiling point (°C) Acetic acid 118. 1 Benzene 80. 2 Chloroform 61. 2 Water 100. 0 Which substance most likely has the strongest intermolecular forces? acetic acid benzene chloroform water.
The compound with the presence of higher inter-molecular forces has been Acetic acid. Thus, option A is correct.
The boiling point has been the temperature, at which the liquid has been started to convert to steam. The boiling has been mediated with the application of the energy to the substance for the breaking of the inter-molecular forces.
The higher the inter-molecular forces in the compound, the higher will be the boiling point of the compound. The higher concentration has also resulted in a higher boiling point.
In the following compounds, acetic acid has the highest boiling point of 118 degrees Celsius. Thus, it has been constituted of the higher inter-molecular forces. Hence, option A is correct.
For more information about boiling point, refer to the link:
https://brainly.com/question/2153588
Which description is not a property of an acid?
1. Slimy feel
2. Corrosive
3. Sour taste
4. Dissolves metals
Answer:
Slimy Feel
Explanation:
Acid usually doesn't have a Slimy Feel to it.
In which one element replaces a similar element in a compound
In which one element replaces a similar element in a compound?
Answer:-A single-replacement reaction
Explanation:-A single-replacement reaction is a reaction in which one element of a compound is replaced by another.
What are some advantages to the use of hydrokinetic energy? What might be some disadvantages?.
Hydro-kinetic energy has advantages of being a clean, domestic, and renewable source with effective production. The disadvantages have been affected marine environment, along with water quality, and electricity on drought.
Hydro kinetic energy has been the energy produced by the movement of water bodies in the form of tides, waves, and oceanic current. The hydro-kinetic energy has been composed with high energy entrapped in the water bodies.
Some of the advantages of hydro-kinetic energy has been:
It has been a clean energy source and has been pollution free.It has been used as domestic source of energy.It has been a renewable source of energy.It has been produced by the tidal waves, thus can be produced effective and in need.Some of the disadvantages of hydro-kinetic energy has been:
Application of water bodies affects the marine environment.It has been producing low BOD and thereby affects the water quality.Conditions such as drought result in the affected electricity production.For more information about hydro-kinetic energy, refer to the link:
https://brainly.com/question/13120577
Answer:
Some advantages to using hydrokinetic energy are that it can be used without mining materials, it is not associated with waste production, and that it does not contribute to air pollution. The main disadvantage to using hydrokinetic energy is the fact that it uses waves and tides as an energy source. This technology could not be used in all locations.
Explanation:
got it on edge sorry for the late response
URGENT PLEASE HELP
What most likely happens when a sodium atom comes near an atom having seven valence electrons?
Answer:
7 Electrons
Explanation:
What it is fill its valence shell, it would need to acquire 7 electrons - a difficult task for a metal like sodium that is a known electron-loser. So unlike fluorine and oxygen, sodium acquires a full octet by losing electrons and emptying out its outermost shell.