Answer:
D. 32.
Explanation:
Remember the formula of atomic mass:
[tex]atomic\text{ mass=atomic number+\# neutrons.}[/tex]If you go to see the periodic table, you can note that the atomic mass of cobalt is 58.9 amu rounded to 59 amu. Let's solve for '# neutrons' and replace the atomic mass (59) and the atomic number (27) (remember that the number of protons is the same that the atomic number), like this:
[tex]\begin{gathered} #\text{ neutrons=atomic mass-atomic number,} \\ #\text{ neutrons=59-27,} \\ #\text{ neutrons=32.} \end{gathered}[/tex]The answer would be that the number of neutrons to make a cobalt atom most stable is D. 32.
a certain hydrocarbon is found to have the percent composition (by mass) of 92.3% c. the molecular formula contains 6 carbon atoms. how many hydrogen atoms are contained in a molecular of this compound?
The number of atoms of hydrogen contained in the molecular formula of the compound is 6 atoms
How to determine the number of atomsWe'll begin by obtaining the formula of the compound. This can be obtained as follow:
C = 92.3%H = 100 - 92.3 = 7.7%Empirical formula =?Divide by their molar mass
C = 92.3 / 12 = 7.7
H = 7.7 / 1 = 7.7
Divide by the smallest
C = 7.7 / 7.7 = 1
H = 7.7 / 7.7 = 1
Thus, the empirical formula of the compound is CH
Finally, we shall determin the number of atoms of hydrogen present in the compound. This can obtained as follow:
When 1 atom of carbon was present, 1 atom of hydrogen was also present.
Therefore,
When 6 atoms of carbon is present, then 6 atoms of hydrogen are also present.
Thus, we can conclude that the number of atoms of hydrogen is 6 atoms
Learn more about number of atoms:
https://brainly.com/question/17925264
#SPJ1
Sodium and lithium have similar chemical properties. What characteristics of these elements explain why they are chemically similar?.
Sodium and lithium have similar chemical properties because both sodium and lithium have one valence electron
Chemical properties is the characteristics of particular substances that can be observed in a chemical reaction and the valence shell electrons in an atom determine the way it will interact with neighboring atoms and therefore determine its chemical properties and both sodium and lithium have one valence electron they share similar chemical properties and element sodium and lithium belong to group IA of the periodic table and the main characteristics is the a single electron in their outermost shell
Know more about Sodium and lithium
https://brainly.com/question/20926873
#SPJ1
N₂(g) + 3H₂(g) 2NH₂(g)
(iv) Name the catalyst used in this industrial process.
Answer:
I catalyst promoter is the answer
How many electron clouds does an element with 29 protons have?
Answer:
5, the last would be incomplete
Explanation:
The first, inner cloud has 2 electrons, then 8, then 8, then 8, then 3.
do eukaryotic Cells have DNA found in the nucleus. True or false
1. State the general period and group trends among
main-group elements with respect to each of the
following properties:
a. atomic radii
b. first ionization energy
c. electron affinity
d. ionic radii
e. electronegativity
The general period and group trends among the main-group elements with respect to each of the following properties are as follows:
atomic radii - increase down the group; decrease across a periodfirst ionization energy - decrease down the group; increase across a periodelectron affinity - decrease down the group; increase across a periodionic radii - increase down the group; decrease across a periodelectronegativity - decrease down the group; increase across a periodWhat are periodic trends?Periodic trends are the trends followed by the properties of the elements going down a group or across a period in the periodic table.
The properties of elements that show periodic trends include:
a. atomic radii - the size of an atom of an element
b. first ionization energy - the energy required to remove a valence electron
c. electron affinity - the energy required to add an electron to a neutral atom
d. ionic radii - the size of the ion of an element
e. electronegativity - the ability to attract electrons
Learn more about periodic trends: https://brainly.com/question/28088037
#SPJ1
calculate the vapor pressure of a solution of 0.300 mol fraction of toluene and 0.700 mol fraction of cyclohexane at 32oc and determine whether the solution will boil. the vapor pressure of pure toluene is 40.2 torr and that of cyclohexane is 125 torr at 32oc
The Vapour pressure of the solution is 99.56 torr
The saturated vapour pressure of the solution maybe lower then the pressure of pure solvent in solution. It is equal to the vapour pressure of the pure solvent at the same temperature scaled by mole fraction of solvent stated by Rault's Law.
P(solution) = mol fraction of solvent × P° ( solvent)
given, pressure of pure toulene = 40.2 torr
pressure of pure cyclohexane = 125 torr
∴ P (solution) = 0.3 × 40.2 + 0.7 × 125
P (solution) = 99.56 torr
hence, vapour pressure is calculated to be 99.56 torr.
Learn more about Rault's Law here https://brainly.com/question/10165688
#SPJ4
problems of using ionic compound and covalent compound in domestic
Answer:
Problems of Using Ionic and Covalent Compounds in Medicine
Stomach pain.
Nausea.
Vomiting.
Heartburn.
Gas.
Constipation.
Diarrhea.
Measuring Liquid Volume Pre-Lab worksheet
1. The longer distance for each choice is:
1 mile1 meter1 inch2. The complete statements are as follows;
1 mi = 1.6 km1 yd = 0.9444 m1 in = 2.54 cm3. The basic unit of length in the metric system is the meter and is represented by a lowercase m.
4. The meter is defined as the distance traveled by light in absolute vacuum in 1⁄299,792,458 of a second.
5. The values that complete each statement is given below:
1 km = 1000 m1 m = 100 cm1 m = 1000 mm6. The larger value for each option is:
A. 105 centimetersB. 4400 metersC. 12 centimetersD. 1200 millimeters7. The number of millimeters in 1 centimeter is 10 mm
8. Using the ruler and line, the answers are:
2.8 cm29 mm3 cmWhat is the unit for measuring distance in the metric system?The unit for measuring distance in the metric system is the meter. Smaller and larger values of the meter are also used such as millimeters, centimeters, kilometers, etc.
Other units for measuring distance include yards, miles, and inches.
The various units for measuring distance can also be interconverted using their conversion factors.
Learn more about the metric system at: https://brainly.com/question/1837503
#SPJ1
An unknown object has a mass of 125 grams. It is then added to a graduated cylinder filled with 55.0 mL of water. After being submerged, the water
level increases to 66.0 mL. What is the density of the object?
According to the given statement is 11.36 g/ml is the density of the object.
What is density of an object?The proportion of an object's mass to its volume has been its density. The unit of density is frequently grams per cubic centimeter (g/cm3). Keep in mind that the volume is measured in cubic centimeters, not grams (the same volume as 1 millilitre). More particles will make a box denser than fewer particles in the same box.
What many density are there?Absolute density and relative density are the two main types of density. Relative density, also known as specific gravity, is the proportion of a product's density to the density of a reference material.
Briefing:Mass = 125 g
Initial Volume =55.0 mL
Final Volume = 66.0 mL
Volume = 66.0mL - 55.0mL
Volume= 11.0 mL
ρ = m/v
ρ = 125/11
ρ = 11.36 g/ml.
To know more about Density visit:
https://brainly.com/question/15164682
#SPJ13
How do scientists predict the polarity of molecules?
When a molecule lacks polar bonds, there is no permanent charge difference between parts of the molecule, and the molecule is nonpolar.
Because the electron charge on both atoms is identical, the Cl2 molecule has no polar bonds. As a result, it is a nonpolar molecule. Hydrocarbons are nonpolar molecular substances because none of the bonds in hydrocarbon molecules, such as hexane, C6H14, are significantly polar.
The molecule is nonpolar if the arrangement is symmetrical and the arrows are of equal length. The molecule is polar if the arrows are of different lengths and do not balance each other. The molecule is polar if the arrangement is asymmetrical.
Refer to for more information on molecule polarity.
https://brainly.com/question/584255?referrer=searchResults
how does water help macromolecules carry out their functions
Please help How many moles of a gas sample are in 5.0 L container at 215 K and 342 kPa(The gas constant is 8.31 L kPa/mol K) Round your answer to one decimal place and enter the number only with no units.
Answer
1.0 mol
Explanation
Given:
Volume, V = 5.0 L
Temperature, T = 215 K
Pressure, P = 342 kPa
The gas constant, R = 8.31 L kPa/mol K
What to find:
The number of moles of the gas sample.
Step-step-solution:
The number of moles of the gas can be determine using the ideal gas equation formula:
[tex]PV=nRT[/tex]Put the given values into the formula and calculate for n:
[tex]\begin{gathered} 342\times5.0=n\times8.31\times215 \\ 1710=1786.65n \\ \text{Divide both sides by 1786.65} \\ \frac{1710}{1786.65}=\frac{1786.65n}{1786.65} \\ n=0.9571\text{ mol} \\ To\text{ one decimal place,} \\ n=1.0\text{ mol} \end{gathered}[/tex]The number of moles of the gas sample is 1.0 mol.
a 1.80 m solution of nitrous acid is prepared. find the percent ionization. a second solution is prepared in the same manner except the solution also contains 0.71 m potassium nitrite. find the percent ionization. how much did the percent ionization decrease with the addition of the common nitrite ion?
The percent ionization in the nitrous acid solution is 1.97% before, and 0.0999% after the addition of sodium nitrate, which lowered the ionization 19.7 times.
To calculate percent ionization, we need to use the expression for the acidity constant of nitrous acid:
[tex]Ka = \frac{[H^{+} ][NO_{2} ^{-} ]}{[HNO_{2} ]}[/tex]
Ka - acidity constant (for nitrous acid, 7.1 * 10⁻⁴)
[H⁺] - concentration of H⁺ ions
[NO₂⁻] - concentration of nitrite ions
[HNO₂] - concentration of unionized nitrous acid
[H⁺] = [NO₂⁻]
[HNO₂] = 1.80 M - X
[tex]7.1 * 10^{-4} = \frac{X^{2} }{1.80 - X}[/tex]
When we transform the equation above, we get a quadratic equation:
X² + 7.1 * 10⁻⁴X - 12.78 * 10⁻⁴ = 0
Once we solve for X, we get:
X = 0.0354 M
Because the concentration of H⁺ ions (X) is equal to the concentration of the ionized nitrous acid, the percent ionization will be:
%ion = 100% * X / 1.80 M
%ion = 100% * 0.0354 M / 1.80 M
%ion = 1.97%
The second calculation is actually easier because we can safely assume that, with added sodium nitrite, all nitrite ions come from the salt, and the amount coming from the acid is negligible. With that in mind, the expression for the acidity constant will look like this:
[tex]7.1 * 10^{-4} = \frac{X * 0.71 }{1.80 M - X}[/tex]
When rearranged, we get this equation:
0.71 * X = 12.78 * 10⁻⁴ M - 7.1 * 10⁻⁴X
0.71071 X = 12.78 * 10⁻⁴ M
X = 12.78 * 10⁻⁴ M / 0.71071
X = 0.001798 M
%ion = 100% * 0.001798 M / 1.80 M
%ion = 0.0999%
So the addition of sodium nitrite resulted in 1.97 / 0.0999 = 19.7 times lower ionization of the nitrous acid.
You can learn more about percent ionization here:
brainly.com/question/13161344
#SPJ4
express Sb in a condensed form in order of increasing orbital energy
The condensed form of Sb in order of increasing orbital energy is [Kr] 5s² 4d¹⁰ 5p³
Sb (Antimony) is a metalloid with atomic number 51. The electronic configuration of antimony is 1s² 2s²p⁶ 3s²p⁶d¹⁰ 4s²p⁶d¹⁰5s²p³
As you can see, the normal notation of electronic configuration is lengthy. Condensed or abbreviated form of the configuration would be preferred to normal lengthy electronic configuration for representation.
In condensed form, in place of completely filled subshells with configuration that is similar to noble gas is represented by the symbol of that particular inert gas / noble gas. The symbol would be represented inside square brackets.
The electronic configuration of Krypton, a noble gas is 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶.
Therefore, Sb can be expressed in condensed form as [Kr] 5s² 4d¹⁰ 5p³. As observed, 1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ in Sb is expressed as Kr followed by the remaining electronic configuration in Sb in order of increasing orbital energy.
To know more about Electronic configuration
https://brainly.com/question/14283892
#SPJ1
What is the mass of calcium oxide produced in the reaction?
Answer:
From the reaction stoichiometry, 2 moles of Ca produces 2 moles of CaO. Thus, the number of moles of Ca is the same as that of CaO. Therefore, n = 0.16892 mol for CaO. Hence, 9.47 grams of calcium oxide are produced.how many formula units are there in 212 grams of mgCl2
Formula units are there in 212 grams of MgCl₂ are 830.56
Formula is the empirical of any ionic or covalent network solid compound used as an independent entity for stoichiometric calculations and it is the lowest whole number ratio of ions represented in an ionic compound
Here given data is
MgCl₂ = 212 grams
1 mole of magnesium chloride has mass = 95.211 gram and contains 6.022×10²³formula units of magnesium chloride
Here 212 grams×6.022×10²³form unit of MgCl₂/95.211 gram = 830.56
Know more about magnesium chloride
https://brainly.com/question/22727305
#SPJ1
in part 2 of the experiment, you will be analyzing a sample of household bleach. a 0.0854 g sample of household bleach is completely reacted with ki(s). the resulting solution is then titrated with 0.150 m nas2o3 solution. 0.890 ml of the solution is required to reach the colorless endpoint. what is the mass percent of naocl (mm
There is 5.8 % of NaOCl in the sample.
The oxidation of hypochlorite is the first process, which goes as follows:
OCl^- + 2I^- + 2H^+ -----> I2 + Cl2 + H2O
Iodine and sodium thiosulfate react in the second stage as follows:
I2 + 2NaS2O3 -----> Na2S4O6 + 2NaI
Thiosulfate moles = 0.150 M * 0.890/1000 L = 1.335 * 10-4 moles.
Since 2 molecules of thiosulfate react with 1 mole of I2,
1.335 * 10-4 moles of thiosulfate and x moles of I2 react.
x = 1.335 * 10-4 moles/2 moles times one mole.
Iodine equivalent to 6.675 x 10-5 moles
6.675 * 10-5 moles of hypochlorite were reacted because 1 mole of hypochlorite yields 1 mole of iodine.
Therefore, the mass of NaOCl is equal to 4.97 * 10-3 g (6.675 * 10-5 moles * 74.44 g/mole).
5.8% of NaOCl is equal to 4.97 * 10-3 g/0.0854 g * 100/1.
NaOCl makes up 5.8% of the sample.
To know more about bleach refer to https://brainly.com/question/13572752
#SPJ4
help me out please and thank you
The metals that are able to displace iron sulfate from solution are magnesium and aluminum.
What is the electrochemical series?The electrochemical series is a series that shows the reactivity of the metals. We must note that the order of the reactivity of the metals depends on the electrode potential of the metal. The metals that have a higher electrode potential would tend to react better and faster.
Also note that, the metals that are higher in the electrochemical series are able to displace the metals that are lower in the series from their aqueous solutions. This implies that if we add a metal to a solution that contains a meta that is lower in the electrochemical series, the lower meta is discharged from solution.
As we can see, when we add each of these metals to the iron sulfate solution, the only time that we would be able to have a reaction is when we add the aluminum or the magnesium metals.
Learn more about metals:https://brainly.com/question/18153051
#SPJ1
2. a. In general, how do the periodic properties of
the d-block elements compare with those of
the main-group elements?
b. Explain the comparison made in (a).
3. For each main-group element, what is the
relationship between its group number and
the number of valence electrons that the group
members have?
I will give Brainkist
The d block elements differ from the main group elements in the nature of the ions that they form. Also, the group number is related to the number of electrons in the valence sell of an atom.
What are the d block elements?The D block elements are those elements that are found to have d orbitals as the orbitals that has the highest energy in the atom. The d block elements are called the transition metals and they have an incompletely filled d - level.
Owing to the fact that d - level is incompletely filled they do exhibit variable oxidation states and are colored. On the other hand, the main group elements do not exhibit a variable oxidation states and the ions that they form are not colored.
Secondly, for each of the main group elements, the group number shows the number of valence electrons that are present in the outermost shell of the atoms in the elements of the groups.
Learn more about d block elements:https://brainly.com/question/13215603
#SPJ1
Facts for Globalization?
Answer:
Globalization has many benefits, such as the increased flow of goods, services, capital, and people across borders. This has resulted in increased trade and investment, which has led to higher economic growth rates and improved standards of living around the world.
Explanation:
have a good day
coal-based power plants have a carbon dioxide emission of around 1,000 gco2eq/kwh. large scale hydropower plants have a carbon dioxide emission of around 30 gco2eq/kwh. rutgers university average power requirements is 20mw. what is the monthly (30 days) carbon dioxide emission reduction if the source of electricity is hydropower plant instead of coal-based generation?
In Niger State, Nigeria, there is a deposit of clay similar to kaolin that has a lot of promise for use in pollution control processes including wastewater treatment.
This study looks into the ideal settings for Kpautagi clay modification for use in treating the effluent from refineries. The clay was modified using sulphuric acid, and the modification factors taken into account were acid concentration, activation time, and temperature.
The sulphuric acid-modified Kpautagi clay was used in the treatment of refinery wastewater in column mode at a fixed flow rate and mass of adsorbent to establish the best conditions for the modification variables.
The results show that 4M acid concentration, 120min of activation time, and 100°C activation temperature are the best conditions for modifying Kpautagi clay for use in the treatment of petroleum refinery wastewater.
As a result, the best conditions discovered in this work for Kpautagi clay modification could be used to treat wastewater from petroleum refineries more effectively.
To learn more about coal-based power plants, refer to the link below.
https://brainly.com/question/8651941
#SPJ4
It is easier to separate liquids that have boiling points within a range of 5 degrees than it is liquids that have boiling points within a range of 10 degrees true or false?.
The given statement exists as false. The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid.
What is meant by boiling point?The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.
The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid. The temperature at which a liquid's vapor pressure equals one atmosphere is considered the liquid's typical boiling point (760 torr).
The element with the lowest temperature at which an element would smolder is helium, and the element with the highest temperature is tungsten. The melting point is measured in degrees Celsius (C).
To learn more about boiling point refer to:
https://brainly.com/question/40140
#SPJ4
PLEASE SOMEONE HELP EXPLAIN THIS IT’S DUE FIRST THING TMRW MORNING!!
Determine the empirical formula of a 28.00 gram sample containing 22.90 grams carbon and 5.10 grams hydrogen.
If a 28.00 gram sample containing 22.90 grams carbon and 5.10 grams hydrogen , then the empirical formula is CH3 .
What is empirical formula ?The empirical formula, which is defined as the ratio of subscripts of the least whole number of the elements present in the formula, is the simplest formula for a compound. The simplest formula is another name for it.
The formula of a material expressed with the smallest integer subscript is referred to as an empirical formula for a compound.
The empirical formula provides details regarding the ratio of atom counts in the molecule. A compound's % composition directly determines its empirical formula.
Given ,
the mass of the sample of hydrogen and oxygen is 28g .
the mass of carbon in that sample is 22.9g
the mass of hydrogen in that sample is 5.1g
We know ,
the molecular mass of carbon is 12g
thus , 12g of carbon contains 1 mol
22.9g of carbon contains 22.9/12 = 1.9mol
the molecular mass of hydrogen is 1g
1g of hydrogen contains 1mol
5.1g of hydrogen contains 5.1mol
now , the mole ratio of carbon to hydrogen is
= C:H = 1.9/5.1 = 0.37 = 1:3
Hence , the empirical formula is CH3 .
Learn more about empirical formula here :
brainly.com/question/1603500
#SPJ13
Help me please!
The pressure of 6.0 L of an ideal gas in a flexible container is decreased to one third of its original pressure and its absolute temperature is decreased by one half. What is the final volume of the gas?
The final volume of the ideal gas in a flexible container will be 9.0 L.
Let:
'P', 'V', and 'T' be the initial pressure, volume, and temperature of the ideal gas respectively'X' be the final volume of the ideal gasIdeal-gas Equation establishes a relation between pressures, volumes, and temperatures of different conditions.
Using the Ideal-Gas Equation:
PV = nRT
Ideal-Gas Equation for initial conditions will be:
PV = nRT.....................................................(i)
Ideal-Gas Equation for final conditions will be:
(P/3)X = nR(T/2)........................................(ii)
On dividing equations (i) and (ii):
PV = nRT / (P/3)X = nR(T/2)
3V/X = 2
X = 3V/2
Putting the value of V = 6L:
X = 3(6L)/2 = 9L
Learn more about Ideal-Gas Equation:
https://brainly.com/question/25290815
Convert 11.75 millimeters to meters.
Answer: 0.01175
Explanation:
which of the following is true about all spontaneous processes? a) it releases energy as heat. b) it will occur quickly. c) it will continue on its own once begun. d) it is never endothermic.
C) It will continue on its own once begun is true for spontaneous processes.
What is spontaneous process?A spontaneous process is one that takes place without the system receiving any outside input. The system which releases free energy and transitions to a lower, more thermodynamically stable energy state is a more technical definition.The sign convention for changes in free energy is as follows: a release of free energy from the system corresponds to a negative change in the system's free energy and a positive change in the surrounding free energy.Spontaneous processes do not require an external energy source because they are known to be characterized by a decrease in the system's free energy.Spontaneous processes are characterized by a rise in entropy in isolated systems when no energy is exchanged with the environment.Chemical reactions that occur spontaneously in the context of interest are referred to as spontaneous reactions.To learn more about spontaneous process, refer to https://brainly.com/question/14015869
#SPJ1
substances like xenon , which is a gas at room temperature and pressure, can often be liquified or solidified only at very low temperatures. at a pressure of , does not condense to a liquid until and does not freeze until . what are the equivalent absolute temperatures? to condense: k
The equivalent absolute temperature when it condenses will be 27.25K. and freezes at 24.65K.
To find equivalent absolute temperatures we have to use the following equation:
0°C + 273.15 = 273.15K
The main idea is to convert degree Celsius to Kelvin.
In this manner, we are going make utilize of the over condition and space within the values for at degree Celsius at which it condenses and at degree Celsius at which it solidifies.
So, the temperature at which it condenses:
-245.9°C + 273.15 = 27.25K.
Also, the temperature at which it freezes.
-248.5°C + 273.15 = 24.65K.
Absolute temperature is utilized in the application of the perfect gas law and numerous other laws of thermodynamics.
A scale for outright temperature with degree units the same as on the Celsius scale is known as the Kelvin scale; the temperature scale utilizing Fahrenheit degree units is the Rankine scale.
Appropriately, a temperature distinction of one degree on the Celsius scale compares to a temperature contrast of one degree on the Kelvin scale; additionally for the Fahrenheit and Rankine scales.
Learn more about equivalent absolute temperatures at
https://brainly.com/question/10424286
#SPJ4
Although part of your question is missing, you might be referring to this full question:
Substances like neon, which is a gas at room temperature and pressure, can often be liquified or solidified only at very low temperatures. At a pressure of 1 atm, Ne does not condense to a liquid until -245.9°C and does not freeze until -248.5°C. What are the equivalent absolute temperatures?
To condense: __K
To freeze: __ K
how does the specific heat capacity of water compare with the specific heat capacities of other common materials? how does the specific heat capacity of water compare with the specific heat capacities of other common materials? the specific heat capacity of water is very low in comparison with other common materials. the specific heat capacities of water and other common materials are approximately the same. the specific heat capacity of water is very high in comparison with other common materials.
Liquid water has one of the highest specific heat capacities among common substances, about 4184 J⋅kg−1⋅K−1 at 20 °C; but that of ice, just below 0 °C, is only 2093 J⋅kg−1⋅K−1. The specific heat capacities of iron, granite, and hydrogen gas are about 449 J⋅kg−1⋅K−1, 790 J⋅kg−1⋅K−1, and 14300 J⋅kg−1⋅K−1, respectively.
The amount of heat required to increase the temperature of 1 gram of a substance by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.
The heat capacity of a sample of a substance is divided by the mass of the sample to produce the specific heat capacity (symbol cp), also known as massif heat capacity. Informally, it is the quantity of heat that must be added to one unit of a substance's mass in order to raise its temperature by one unit. joule per kelvin per kilogram is the specific heat capacity unit in the SI.
A substance's specific heat capacity may be substantially higher when heated in an open vessel that permits expansion than when heated in a closed vessel that prevents expansion, especially when the substance is a gas (specific heat capacity at constant pressure) (specific heat capacity at constant volume).
To learn more about specific heat capacity visit here:
brainly.com/question/28302909
#SPJ4
what is the ph of a strontium hydroxide solution obtained by dissolving 0.17 grams of strontium hydroxide in enough water to obtain 670. ml of solution? insert your answer in decimal notation, rounded to 2 decimal digits.
The pH of a strontium hydroxide was obtained by dissolving 0.17 grams of strontium hydroxide in enough water to obtain 670. ml of solution is 3.6.
What is pH?The range of pH goes from 0 to 14, with 7 acting as neutral. A pH value of 7 or less denotes acidity, while a pH value of 7 or more denotes baseness. The amount of free hydrogen and hydroxyl ions present in the solution is what determines the pH of water.
Molarity of strontium hydroxide = mass/volume
Molarity of strontium hydroxide = 0.17/670
Molarity of strontium hydroxide = 0.000253 = 2.53 × 10⁻⁴
pH = - log [strontium hydroxide]
pH = -log [2.53 × 10⁻⁴]
pH = 3.59
pH = 3.6
To know more about the pH of the solution visit:
https://brainly.com/question/11300720
#SPJ4