A company has to decide whether to invest money in the development of a microbiological product. The company's research director has that there is a 60% chance that a successful development could be achieved in 2 years. However, if the product had not been successfully developed at the end of this period, the company would abandon the project, which would lead to a loss in present-value terms of $ 3 million. (Present value is designed to take the company's time preference for money into account. The concept is explained in Chapter 8) In the event of a successful development, a decision would have to be made on the scale of production. The returns generated would depend on the level of sales which could be achieved over the period of the product's life. For simplicity, these have been catorized as either high or low. If the company opted for large-volume production and high sales were achieved, then net returns with a present-value of $6 million would be obtained. However, large-scale production followed by low sales would lead to net returns with a present value of only $1 million.In contrast, if the company decided to invest only small-scale production facilities then high sales would generate net returns with a present value if facilities then high sales would generate net returns with a present value of $4 million and low sales would generate net returns with a present value of $2 million. The company's marketing manager estimates that there is a 75% chance that high sales could be achieved.(a) Construct a decision tree to represent the company's decision problem. (b) Assuming that the companys objective is to maximize its expected returns, determine the policy that it should adopt. (c) There is some debate in the company about the probability that was estimated by the research diretor. Assuming that allo other elements if the problem remain the same, determine how low this probility would have ti be before the option of not developing the product should be chosen. (d) before the final decision us nade the company us taken iver by a bew owner, who has the utilities shown below for the sums of money involved in the decision. (The owner has no ointerest in other attributes which may be associated with the decision, such as developing a prestige product or maintaining employment.) What implications does this have for the policy that you iidentified in (b) and why?Present value of net returns New owner's utility-$3m, $0m, $1m, $2m, $4m, $6m 0, 0.6, 0.75, 0.85, 0.95, 1.0

Answers

Answer 1

The optimal policy for the new owner is to invest in large-scale production. This decision branch has the highest expected utility of $4.285m.

The initial node represents the decision whether to invest in the development of the microbiological product.

The two possible outcomes are a successful development or failure after 2 years.

(b) To determine the policy that the company should adopt to maximize its expected returns, we need to calculate the expected value at each decision node.

Starting from the end nodes and working backwards, we have:

For large-scale production with high sales:

Expected value = 0.75 x $6m + 0.25 x $1m = $4.25m

For large-scale production with low sales:

Expected value = 0.75 x $1m + 0.25 x $6m = $1.75m

For small-scale production with high sales:

Expected value = 0.75 x $4m + 0.25 x $2m = $3.5m

For small-scale production with low sales:

Expected value = 0.75 x $2m + 0.25 x $4m = $1.75m

At the 2-year node, the expected value for a successful development is:

For large-scale production:

Expected value = 0.75 x $4.25m + 0.25 x $1.75m = $3.5m

For small-scale production:

Expected value = 0.75 x $3.5m + 0.25 x $1.75m = $2.81m

Finally, at the initial node, the expected value for investing in the development is:

Expected value = 0.6 x $3.5m + 0.4 x (-$3m) = $0.1m

Therefore, the policy that the company should adopt to maximize its expected returns is to invest in the development of the microbiological product, choose large-scale production if the development is successful, and choose small-scale production otherwise.

(c) If the probability of a successful development is lower than a certain threshold, the option of not developing the product should be chosen. Let p be this threshold probability. Then the expected value at the initial node is:

Expected value = p x $0m + (1-p) x (-$3m) = -$3m + $3mp

Setting this equal to zero and solving for p, we get:

p = 1

Therefore, if the probability of a successful development is lower than 100%, the company should not invest in the development of the microbiological product.

(d) The new owner's utilities represent their preferences for the sums of money involved in the decision.

The utilities are increasing and concave, indicating diminishing marginal utility of money.

This means that the new owner is risk-averse.

The policy identified in (b) may not be optimal for the new owner because their utilities are different from the present-value net returns.

To determine the optimal policy for the new owner, we need to use the new owner's utility values to calculate the expected utility of each decision branch in the decision tree.

If the company invests in large-scale production and high sales are achieved, the expected utility is 0.75 * 0.95 * 1.0 * $6m = $4.285m.

If the company invests in large-scale production and low sales are achieved, the expected utility is 0.75 * 0.95 * (1 - 0.0) * $1m = $712,500.

If the company invests in small-scale production and high sales are achieved, the expected utility is 0.75 * 0.05 * 1.0 * $4m = $150,000.

If the company invests in small-scale production and low sales are achieved, the expected utility is 0.75 * 0.05 * (1 - 0.0) * $2m = $75,000.

If the company decides not to invest in the product, the expected utility is 0.25 * (1 - 0.6) * $0m + 0.25 * 0.6 * (1 - 0.0) * -$3m = -$450,000.

Therefore, the optimal policy for the new owner is to invest in large-scale production. This decision branch has the highest expected utility of $4.285m.

For similar question on optimal policy:

https://brainly.com/question/30300677

#SPJ11


Related Questions

Using the graph, determine the coordinates of the x-intercepts of the parabola.

Answers

Answer:

x = -5, x = 1

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).

Step-by-step explanation:

The x-intercepts are the x-values of the points at which the curve crosses the x-axis, so when y = 0.

From inspection of the given graph, we can see that the parabola crosses the x-axis at x = -5 and x = 1.

Therefore, the x-intercepts of the parabola are:

x = -5x = 1

As (x, y) coordinates, the x-intercepts are (-5, 0) and (1, 0).

the x intercepts are 1 and-5

erin is playing darts at the adventure arcade. she scores a bullseye 15% of the time, and she is about to throw 5 darts. how likely is it that she will get at least one bullseye?

Answers

the likelihood of Erin getting at least one bullseye in 5 throws is 0.5563 or 55.63%.

To calculate the likelihood of Erin getting at least one bullseye, we need to first calculate the probability of her not getting a bullseye in a single throw. Since she scores a bullseye 15% of the time, the probability of her not getting a bullseye in a single throw is 85% (100% - 15%).

Using the probability of not getting a bullseye in a single throw, we can use the following formula to calculate the probability of not getting a bullseye in all 5 throws:

0.85 x 0.85 x 0.85 x 0.85 x 0.85 = 0.4437

Therefore, the probability of Erin not getting a bullseye in all 5 throws is 0.4437 or 44.37%.

To calculate the probability of Erin getting at least one bullseye in 5 throws, we can subtract the probability of her not getting a bullseye in all 5 throws from 1:

1 - 0.4437 = 0.5563

Therefore, the likelihood of Erin getting at least one bullseye in 5 throws is 0.5563 or 55.63%.

learn more about probability

https://brainly.com/question/30034780

#SPJ11

The probability that Erin will get at least one bullseye in her 5 throws at the adventure arcade is approximately 55.63%.

To find the probability that she will get at least one bullseye in 5 throws, we can use the complementary probability.

This means we will first find the probability of her not getting a bullseye in all 5 throws, and then subtract that from 1.

Find the probability of not getting a bullseye (1 - bullseye probability)

1 - 0.15 = 0.85

Calculate the probability of not getting a bullseye in all 5 throws

0.85^5 ≈ 0.4437

Find the complementary probability (probability of at least one bullseye)

1 - 0.4437 ≈ 0.5563

So, the probability that Erin will get at least one bullseye in her 5 throws at the adventure arcade is approximately 55.63%.

for such more question on probability

https://brainly.com/question/13604758

#SPJ11

what is the answer of this question (please i need help)

Answers

First I’m assuming you take the shapes with the numbers and variable in it to make a number. So that would be

5x+4=10 (not sure if it’s adding lmk if it’s subtraction if you can tell which one it is.)

Then solve.

Subtract 4 from each side. You get

5x=6

Get x by itself, so divide by 5

x= 6/5

The answer is B.

That should be your answer if I read it correctly. Lmk if you have extra questions. I hope it’s not wrong but it helps you understand the concept.

Answer:

The answer is B ([tex]x=\frac{6}{5}[/tex])

Step-by-step explanation:

We start with creating labels for the shapes that represent what they value -at first I tried multiplying the 5x by 4 but there wasn't an answer for that.

[tex]5x+4=10[/tex]

First we just simplify,

[tex]5x (-4)=10(-4)[/tex]

[tex]5x=6[/tex]

then divide,

[tex]\frac{5x}{5} =\frac{6}{5}[/tex]

and we end up with:

[tex]x=\frac{6}{5}[/tex]

or

B

Students made a craft project at camp. They used 2 small pine cone patterns and 1 large pine cone pattern complete the table to find how many patterns were used for the different numbers of projects

Answers

There were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

When 50 students constructed one craft project each using two little pine cone patterns and one giant pine cone pattern, it is the question of how many small and large pine cone patterns were utilised overall:

We can begin by figuring out how many little pine cone patterns were utilized overall to solve this.

Since each student used 2 small pine cone patterns, we can multiply 2 by 50 (the number of students) to get:

2 x 50 = 100 small pine cone patterns used

Similarly, we can calculate the total number of large pine cone patterns used by multiplying the number of students (50) by 1 :

1 x 50 = 50 large pine cone patterns used

Therefore, in total, there were 100 small pine cone patterns and 50 large pine cone patterns used in the camp.

To know more about pine cone patterns, here

brainly.com/question/5057335

#SPJ4

--The complete Question is, If a camp has 50 students and each student made one craft project using 2 small pine cone patterns and 1 large pine cone pattern, how many small and large pine cone patterns were used in total? --

Emmy went to play miniature golf on Monday, when it cost $1 to rent the club and ball, plus $2 per game. Liam went Thursday, paying $1 per game, plus rental fees of $5. By coincidence, they played the same number of games for the same total cost. How many games did each one play?

Answers

Emmy and Liam each played 4 games according to the given statement.

What is an equation?

An equation is a claim that two expressions are equal, typically indicated by the equals symbol (=). In mathematics, equations are used to simulate real-world scenarios, solve problems, and depict relationships between variables.

Exponents, logarithms, and trigonometric functions can all be used in equations, in addition to basic operations like addition, subtraction, multiplication, and division.

Let us suppose the number of games played = x.

Thus, for Emmy we have:

E = 1 + 2x

For Liam the equation is:

L = 5 + 1x

Equating the two equations we have:

1 + 2x = 5 + 1x

x = 4

Hence, Emmy and Liam each played 4 games according to the given statement.

Learn more about equation here:

https://brainly.com/question/10413253

#SPJ1

An animal population N(t) is modeled by the differential equation:
dN/dt = -0. 001N(N - 110)(N - 99). If N(0)=A, where A is a positive integer, what is the maximum value of the positive integer A such that extinction will occur?

Answers

For the given integer, the maximum starting population size that will eventually lead to extinction is 98, since any larger value will result in the population either stabilizing at a positive value or growing indefinitely.

The equation in question is:

dN/dt = -0.001N(N - 110)(N - 99)

Here, N represents the population size, and dN/dt represents the rate of change of the population with respect to time. The right-hand side of the equation tells us how the population size changes over time, and it's determined by the current population size N, as well as the two constants 110 and 99.

We can do this by setting dN/dt equal to zero and solving for N:

dN/dt = -0.001N(N - 110)(N - 99) = 0

=> N = 0, N = 99, N = 110

We can then plot the direction field (i.e., arrows indicating the direction of change) on each interval, and use this to determine the behavior of the solution curve. In this case, we can see that the direction of the arrows changes at each critical point, indicating that the population behavior switches between growing and declining as we move from one interval to the next.

Specifically, we can see that if the initial population size A is less than 99, the population will decline to extinction. If the initial population size is between 99 and 110, the population will initially decline but then grow and eventually stabilize at N = 110. If the initial population size is greater than 110, the population will grow exponentially and tend towards infinity.

To know more about integer here

https://brainly.com/question/15276410

#SPJ4

i need help with this quick please help

Answers

Answer:

19.5625

Step-by-step explanation:

Add up all of the x's (treating each place where an x is as if it's a number -- eg, there's twonumber 12's)

12+12+15+15+15+15+16+18+20+20+22+25+25+25+29 = 313

Divide by the number of x's

313 / 16 = 19.5625

pyriamid a square base that measures 140 m on each side. the height is 91 m. what is the volume of the pyramid?

Answers

The volume of the pyramid is approximately 574,533.33 cubic meters.

To find the volume of a pyramid, you use the formula: V = (1/3) × base area × height, where B is the area of the base and h is the height of the pyramid.

Given that the side length of the square base is 140 m and the height is 91 m.

Since the base of the pyramid is a square with a side length of 140 m, we can find its area by multiplying the side lengths: B = 140m x 140m = 19,600 square meters.
By calculating this expression, you'll find the volume of the pyramid.

Now we can plug in the values for B and h into the formula: V = (1/3)(19,600 square meters)(91 meters) = 574,533.33 cubic meters.

To learn more about volume visit;

brainly.com/question/16788902

#SPJ11

Solve for x to make A||B.
A = x + 12
B = x + 48

X = [?]

Answers

Answer:

Step-by-step explanation:= x+48=180 ( linier pair )

                                            = x=180-48

                                            = x=132

                                         

                                              = x+12=180 (liner pair)

                                              = x=180-12

                                              = x=168

The principal of a school claims that 30 % of grade 3 pupils stay in the playground after their classes. A survey among 500 grade 3 pupils revealed that 150 of them stay in the playground after their classes. Use 99% confidence to conduct a test of proportions.

No unrelated answers or links or you will be reported. Thanks​

Answers

The margin of error for the school's claim  is 0.055 or approximately 5.5%.

To find the margin of error, we need to use the formula:

Margin of error = Critical value x Standard error

For a sample size of 500, the critical value can be found by:

critical value = 1.96

Next, we need to find the standard error. The formula for the standard error is:

standard error = sqrt(p_hat * (1 - p_hat) / n)

In this case, the sample proportion is 150/500 = 0.3.

standard error = sqrt(0.3 * (1 - 0.3) / 500) = 0.028

Finally, we can calculate the margin of error:

Margin of error = 1.96 x 0.028 = 0.055

To know more about margin of error, here

brainly.com/question/29101642

#SPJ4

--The complete Question is, What is the margin of error for the school's claim that 30% of grade 3 pupils stay in the playground after their classes, given the results of the survey of 500 grade 3 pupils, which revealed that 150 of them stay in the playground after their classes? Assume a confidence level of 95%.--

A container built for transatlantic shipping is constructed in the shape of a right
rectangular prism. Its dimensions are 4 ft by 9.5 ft by 13 ft. If the container is entirely
full and, on average, its contents weigh 0.05 pounds per cubic foot, find the total
weight of the contents. Round your answer to the nearest pound if necessary

Answers

Thus, the on average the contents weight for the transatlantic shipping is found as  24.7  pounds.

Explain about the rectangular prism:a solid, three-dimensional object with six rectangular faces.It is a prism due to its uniform cross-section along its whole length.Volume is a unit of measurement for the amount of 3-dimensional space a thing occupies. Cubic units are used to measure volume.

Given dimension of rectangular prism

Length l = 4ft

width w = 9.5 ft

height h = 13 ft

Volume of rectangular prism = l*w*h

V = 4*9.5*13

V = 494 ft³

Now,

1  ft³ = 0.05 pounds

So,

weight of  494 ft³ =  494*0.05 pounds

weight of 494 ft³ =  24.7  pounds

Thus, the on average the contents weigh for the transatlantic shipping is found as  24.7  pounds.

know more about the rectangular prism

https://brainly.com/question/24284033

#SPJ1

Pollyomial Roller coaster project! HELP PLEASE
please show all work, below is an example, rubric, and what's needed in this graph.
please show the graph and Factored form
Thank you

Answers

The description of the polyomial roller coaster project is shown below

Solving the polyomial roller coaster project

Proposal for the "Imaginary Rush" Roller Coaster:

Coaster name: Imaginary RushFactored form of polynomial: 1/10(x + 1)(x - 2)(x - 4)(x + 5i)(x - 5i)Standard form of the polynomial: f(x) = 1/10[x⁵ - 5x⁴ + 27x³ - 117x² + 50x + 200]

The polynomial's graph is attached

Description of how client specifications are met:

The coaster starts on ground level, as the graph of the polynomial crosses the x-axis at x = -1.The coaster goes underground, as the graph dips below the x-axis at x = 4.The coaster includes the imaginary root, as the polynomial has two complex roots at x = 5i and x = -5i.The coaster "grazes" the ground, as the graph of the polynomial touches the x-axis at x = 2.

Interpretation of the practicality of the design:

The design of Imaginary Rush is both exciting and practical. The coaster meets all the client's specifications while also providing a thrilling ride for coaster enthusiasts.

The dips and peaks of the coaster follow the behavior of the polynomial, providing a unique experience for riders.

The use of the imaginary root adds an additional level of excitement to the ride, making it stand out from other roller coasters.

Overall, the design of Imaginary Rush is both fun and practical, making it an excellent addition to any theme park.

Discussion of the polynomial's behaviors:

Tail Behavior: As x approaches negative infinity, the value of the function approaches negative infinity. As x approaches positive infinity, the value of the function approaches positive infinity.Relative Maxima/Minima: The polynomial has a relative maximum at x = 2 and a relative minimum at x = 4.Intervals of increasing/decreasing behavior: [tex]\mathrm{as}\:x\to \:-\infty \:,\:f\left(x\right)\to \:-\infty \:[/tex], [tex]\mathrm{as}\:x\to \:+\infty \:,\:f\left(x\right)\to \:+\infty \:,\:\:\mathrm{and\:as}\:x\to \:-\infty \:,\:f\left(x\right)\to \:-\infty \:[/tex]

Read more about polynomial at

https://brainly.com/question/7693326

#SPJ1

In triangle ∆ABC, m<A = 33°, m<C = 58°, and AB = 25 in. What is AC to the nearest tenth of an inch?

1. 16.1 in.
2. 38.9 in
3. 42 in.
4. 12 in.​​​

Answers

The value of AC to the nearest tenth is 29.5

What is sine rule?

The sine rule states that if a, b and c are the lengths of the sides of a triangle, and A, B and C are the angles in the triangle; with A opposite a, etc., then a/sinA=b/sinB=c/sinC.

Angle B = 180-(33+58)

= 180-91 = 89°

using sine rule

represent AC by x

x/ sin89 = 25/sin 58

xsin58 = 25sin89

0.848x = 0.9998×25

0.848x = 24.995

x = 24.995/0.848

x = 29.5( nearest tenth)

therefore the value of AC is 29.5.

learn more about sine rule from

https://brainly.com/question/20839703

#SPJ1

A rectangular prism is shown in the image.

A rectangular prism with dimensions of 5 yards by 5 yards by 3 and one half yard.

What is the volume of the prism?

twenty eight and one half yd3
forty one and one fourth yd3
eighty seven and one half yd3
166 yd3

Answers

The volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]

What is the volume of the prism?

The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height.

In this case, the length is 5 yards, the width is 5 yards, and the height is 3 and 1/2 yards. We can convert the height to a mixed number fraction of 7/2 yards.

Therefore, the volume of the prism is:

V = lwh = 5 yards × 5 yards × 7/2 yards = 87.5 cubic yards

So, the volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]

to know more about volume

brainly.com/question/1578538

#SPJ1

A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.

10, 11, 35, 39, 40, 42, 42, 45, 49, 49, 51, 51, 52, 53, 53, 54, 56, 59

A graph titled Donations to Charity in Dollars. The x-axis is labeled 10 to 19, 20 to 29, 30 to 39, 40 to 49, and 50 to 59. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 10 to 19, up to 2 above 30 to 39, up to 6 above 40 to 49, and up to 8 above 50 to 59. There is no shaded bar above 20 to 29.

Which measure of variability should the charity use to accurately represent the data? Explain your answer.

The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 49 is the most accurate to use to show that they need more money.
The range of 49 is the most accurate to use to show that they have plenty of money.
The IQR of 13 is the most accurate to use, since the data is skewed.

Answers

The range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

what is statistics?

Statistics is a branch of mathematics that deals with collecting, analyzing, interpreting, presenting, and organizing data. It involves the study of methods for designing experiments and surveys, analyzing and interpreting data, and making decisions based on data. Statistics plays an important role in a wide range of fields, including science, social science, economics, finance, engineering, and many others. It is used to draw conclusions, make predictions, and inform decision-making by providing a quantitative and objective approach to understanding and analyzing data.

The most accurate measure of variability to use for this data set is the range of 49. The range is the difference between the highest and lowest values in the data set, which in this case is 59 - 10 = 49. The range provides a simple and straightforward measure of the spread of the data and is useful when the data is not too skewed.

While the data in this set is skewed, the range is still an appropriate measure of variability because there are no extreme outliers that would significantly affect the range. The IQR (interquartile range) is another measure of variability that is useful for skewed data, but in this case, it would not be the most appropriate choice because the data set is not divided into quartiles and the IQR would not provide additional information beyond what the range already shows.

Therefore, the range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.

To learn more about statistics from the given link

https://brainly.com/question/29093686

#SPJ1

Find the three trigonometric ratios. If needed, reduce fractions.

Answers

Soh Cah Toa

Sin= 15/17 opposite/hypotenuse
Cos= 8//17 adjacent/ hypotenuse
Tan= 15/8 opposite/ adjacent

During a flood, there were 6000 acres of land under water. After 2 days, only 3375 acres of land were under water. Assume that the water receded at an exponential rate. Write a function to model this situation that has a B-value of 1.

Answers

where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.

To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:

[tex]A(t) = A0 * e^{(-kt)}[/tex]

where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.

To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:

[tex]3375 = A0 * e^{(-2k)[/tex]

We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:

Dividing both sides by 6000, we get:

ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]

Taking the natural logarithm of both sides, we get:

[tex]ln(0.5625) = -2k[/tex]

Solving for k, we get:

[tex]k = -ln(0.5625)/2[/tex]

k ≈ 0.3118

Therefore, the function to model the situation of the flood is:

[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]

To learn more about function, visit

https://brainly.com/question/12431044

#SPJ1

Which expressions are equivalent to 27^4/3?

Select the three correct answers.

A. 4^3

B. (27^1/3)^4

C. 3^1/4

D. 81

Answers

D) 81 is equivalent to 27^(4/3).

The expression 27^4/3 can be simplified using the rule that (a^m)^n = a^(m*n). Therefore, we can write,

27^(4/3) = (3^3)^(4/3)

Using the power of a power rule, we can simplify further,

(3^3)^(4/3) = 3^(3*4/3)

Simplifying the exponent, we get,

3^(4)

To check the other answer choices,

A. 4^3 is not equivalent to 27^4/3.

B. (27^1/3)^4 is equivalent to 27^(4/3), which we already simplified to 3^4. Therefore, this expression is also equivalent to 3^4.

C. 3^1/4 is not equivalent to 27^4/3.

D. 81 is equivalent to 3^(4).

Therefore, the expression 27^4/3 is equivalent to 3^4, which is answer choice D) 81.

To learn more about equivalent here:

https://brainly.com/question/31532746

#SPJ4

true or false: a linear programming problem can have an optimal solution that is not a corner point. select one: true false

Answers

It is true that a linear programming problem can have an optimal solution that is not a corner point.

How given statement is true? Explain further?

In linear programming, the optimal solution represents the point where the objective function is optimized while still satisfying all the constraints.

In some cases, the optimal solution may occur at a corner point of the feasible region, where two or more of the constraints intersect.

However, it is possible for the optimal solution to occur at a point that is not a corner point, but rather lies on an edge or a line segment of the feasible region.

This can occur when the objective function is parallel to one of the constraint lines or when there are redundant constraints that limit the feasible region.

Therefore, it is true that a linear programming problem can have an optimal solution that is not a corner point.

Learn more about linear programming.

brainly.com/question/15417573

#SPJ11

a random sample of n equal to 64 scores is selected from a normally distributed population with mu equal to 77 and sigma equal to 21. what is the probability that the sample mean will be less than 79? hint: this is a z-score for a sample.

Answers

The probability of the sample mean being less than 79 is 77.64%

In order to solve the given problem we have to take the help of Standard error mean

SEM = ∑/√(n)

here,

∑ = population standard deviation

n = sample size

hence, the z-score can be calculated as

z = ( x' - μ)/σ/√(n)

here,

x' = sample mean

μ = population mean

σ = population standard deviation

n = sample size

adding the values into the formula

SEM = σ / √(n)

= 21/√64

= 2.625

z = (x' - μ)/SEM

= (79-77)/2.625

= 0.76

now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage

0.77 x 100

= 77%

The probability of the sample mean being less than 79 is 77.64%

To learn more about probability,

https://brainly.com/question/13604758

#SPJ4

19.
Solve the problem.
2
Find the critical value XR corresponding to a sample size of 5 and a confidence
level of 98%.
(1 point)
O11.143
00.297
13.277
00.484

Answers

The critical value of the chi-square distribution corresponding to a sample size of 5 and a confidence level of 98% is given as follows:

0.297 and 13.277.

How to obtain the critical value?

To obtain a critical value, we need three parameters, given as follows:

Distribution.Significance level.Degrees of freedom.

Then, with the parameters, the critical value is found using a calculator.

The parameters for this problem are given as follows:

Chi-square distribution.1 - 0.98 = 0.02 significance level.5 - 1 = 4 degrees of freedom.

Using a chi-square distribution calculator, the critical values are given as follows:

0.297 and 13.277.

More can be learned about the chi-square distribution at https://brainly.com/question/4543358

#SPJ1

Find the surface area and width of a rectangular prism with height of 6 cm, length of 5 cm, and the
volume of 240 cm³.

Answers

236 cm2 is the surface area

Answer:

236 cm^2  and  8 cm

Step-by-step explanation:

width=w

240=6(5)(w)

w=8 cm

area=2[(6)(5)+(6)(8)+(5)(8)]

area=236 cm^2

the area covered by the hour hand of a wall clock between time 4 : 26 and 6 : 50 is what percent of the area covered by it in 15 hours?

Answers

Step-by-step explanation:

From 4:26 to 6:50  is   2 hr and 24 in = 2  24/60  hrs =  2.4 hours

2.4 hrs is what percent of 15 hrs ?

2.4  /  15  * 100% = 16%

A net of a rectangular pyramid is shown.

A net of a rectangular pyramid with a base with dimensions of 13 inches by 17 inches. The two larger triangular faces have a height of 11 inches. The smaller triangular face has a height of 12.3 inches.

What is the surface area of the pyramid?

567.9 in2
457.4 in2
346.9 in2
283.95 in2

Answers

The surface area of the rectangular pyramid is approximately 567.9 in².

What is rectangular pyramid?

A rectangular pyramid is a type of pyramid that has a rectangular base and four triangular faces that meet at a common vertex. The rectangular base of a rectangular pyramid can be any rectangle, meaning that the length and width can be different. The four triangular faces of a rectangular pyramid are congruent, which means they are the same size and shape. The height of the rectangular pyramid is the distance between the vertex and the center of the base. The surface area of a rectangular pyramid can be calculated by finding the area of each face and adding them together.

To find the surface area of the rectangular pyramid, we need to find the area of each face and add them together.

First, let's find the area of the rectangular base:

Area of base = length x width = 13 in x 17 in = 221 in²

Next, let's find the area of the larger triangular faces:

Area of each larger triangular face = (1/2) x base x height = (1/2) x 17 in x 11 in = 93.5 in²

Total area of both larger triangular faces = 2 x 93.5 in² = 187 in²

Finally, let's find the area of the smaller triangular face:

Area of smaller triangular face = (1/2) x base x height = (1/2) x 13 in x 12.3 in = 79.95 in²

Now, we can find the total surface area of the rectangular pyramid by adding the areas of all the faces:

Total surface area = area of base + area of both larger triangular faces + area of smaller triangular face

Total surface area = 221 in² + 187 in² + 79.95 in²

Total surface area = 488.95 in²

Therefore, the surface area of the rectangular pyramid is approximately 567.9 in².

To know more about rectangular pyramid visit:

https://brainly.com/question/27270944

#SPJ1

The solid below is dilated by a scale factor of 1/2. Find the volume of the
solid created upon dilation.
24
26
10
34

Answers

Answer: 4080

Step-by-step explanation:

First you have to find the area of the triangle. 24*10 = 240. 240/2 = 120. Then you multiply the area of the triangle and multiply it by 34. 120 * 34 = 4080. This means the answer is 4080

(COMPOUND INTEREST)

-$17,525 deposit, interest at 1/2% for 3 years; find interest earned.

20 points reward

Answers

Answer:

Step-by-step explanation:

Principal = 17,525. Rate = 1/2% = 0.005 time,t = 3

Interest, I = principal x rate x time

Interest, I = 17525 x 0.005 x 3

Interest, I = $262.875

there are 12 sides and 1 side is 8 so 8 x 12 is 96 so 96 is the perimeter and i need the area

Answers

Therefore, the area of the regular dodecagon with a side length of 8 units is approximately 1,843.21 square units.

What is area?

In mathematics, area refers to the measure of the amount of space inside a two-dimensional shape or region. It is a measure of the size of a flat surface, and is typically expressed in square units, such as square meters (m²), square centimeters (cm²), or square feet (ft²). The area of a shape can be calculated using various formulas, depending on the type of shape. The concept of area is used in many areas of science and engineering, including physics, geometry, and architecture. It is particularly important in fields such as construction and landscaping, where the amount of material needed to cover a given area is often a key factor in planning and budgeting.

Here,

To find the area of a regular dodecagon, you can use the formula:

Area = (3 * √3 / 2) * s² * n

where s is the length of each side and n is the number of sides.

Substituting s = 8 and n = 12, we get:

Area = (3 * √3 / 2) * 8² * 12

Area = 3 * √3 * 64 * 12

Area = 1,843.21 square units (rounded to two decimal places)

To know more area,

https://brainly.com/question/30106292

#SPJ1

Compare the numbers using <, >, or =. 0. 78 ___ 0. 708 < > =

Answers

For the given numbers, 78 < 0. 708

To compare two numbers, we need to look at their values and determine which one is larger or smaller. In this case, we have 78 and 0.708. We can start by comparing their whole number parts, which are 78 and 0, respectively. Since 78 is greater than 0, we know that 78 is a larger number.

But what about the decimal parts of these numbers? To compare them, we need to look at the place value of each digit. The first digit after the decimal point in 78 is 0, and the first digit after the decimal point in 0.708 is 7. Since 7 is greater than 0, we know that 0.708 is a larger number than 0.78 in terms of their decimal parts.

Now that we have compared the whole number parts and decimal parts separately, we can combine the results to determine the final comparison. Since 78 is larger than 0 and 0.708 is larger than 0.78 in terms of their decimal parts, we can conclude that:

78 < 0.708

We use the symbol "<" here because 78 is smaller than 0.708.

To know more about number here

https://brainly.com/question/17429689

#SPJ4

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

f(d) = 7(1.06)d

Part A: When the biologist concluded her study, the radius of the algae was approximately 13.29 mm. What is a reasonable domain to plot the growth function? (4 points)

Part B: What does the y-intercept of the graph of the function f(d) represent? (2 points)

Part C: What is the average rate of change of the function f(d) from d = 4 to d = 11, and what does it represent? (4 points)

Answers

Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Domine and y-intercept of a function:

The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.

The y-intercept of a function represents the value of the function when the input is equal to zero.

The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).

Here we have

A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:

=> f(d) = 7(1.06)^d

Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29  

=> 13.29 = [tex]7(1.06)^{d}[/tex]

=> ln(13.29/7) = d ln(1.06)

=> d = ln(13.29/7)/ln(1.06) ≈ 11  

Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.

Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.

Substituting d = 0 into the given equation, we get:

f(0) = 7(1.06)⁰ = 7

Therefore, The y-intercept of the graph of the function f(d) is 7

Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):

f(4) = 7(1.06)⁴ ≈ 8.84

f(11) = 7(1.06)¹¹ ≈ 13.29

The slope of the second line passing through these two points is:

Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64

Therefore,

The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.

Learn more about Functions at

https://brainly.com/question/24839787

#SPJ1

rylie is a newly hired cybersecurity expert for a government agency. rylie used to work in the private sector. she has discovered that, whereas private sector companies often had confusing hierarchies for data classification, the government's classifications are well known and standardized. as part of her training, she is researching data that requires special authorization beyond normal classification. what is this type of data called? group of answer choices

Answers

Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.

Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.

For more information about data classification, visit :

https://brainly.com/question/30580761

#SPJ4

Other Questions
Help solve this! ASAP Consider a firm whose only asset is a plot of vacant land, and whose only liability is debt of $14.8 million due in one year. If left vacant, the land will be worth $9.7 million in one year. Alternatively, the firm can develop the land at an up-front cost o $20.4 million. The developed the land will be worth $35.6 million in one year. Suppose the risk-free interest rate is 10.1%, assume all cash flows are risk-free, and there are no taxes. a. If the firm chooses not to develop the land, what is the value of the firm's equity today? What is the value of the debt today? b. What is the NPV of developing the land? c. Suppose the firm raises $20.4 million from the equity holders to develop the land. If the firm develops the land, what is the value of the firm's equity today? What is the value of the firm's debt today? d. Given your answer to part (C), would equity holders be willing to provide the $20.4 million needed to develop the land? HELLLPPP Quick What is the mean of this data set? 12, 17, 16, 10, 20352515 how does using media devises like smart phones, tablets, etc. during studying affect the overall quality of one's learning? in a bios-based system, the bios uses its boot order to scan a hard drive for a(n) _______________. bob has raised his heart rate and broken a sweat while walking on a treadmill. he can also carry on a conversation with the woman on an adjacent treadmill. the american college of sports medicine would describe bob's physical activity as . Stocks A and B have the following probability distributions of expected future returns:Probability A B0.1 (9 %) (22 %)0.2 4 00.5 13 210.1 20 290.1 29 37Calculate the expected rate of return, , for Stock B ( = 11.30%.) Do not round intermediate calculations. Round your answer to two decimal places.%Calculate the standard deviation of expected returns, A, for Stock A (B = 16.37%.) Do not round intermediate calculations. Round your answer to two decimal places.%Now calculate the coefficient of variation for Stock B. Do not round intermediate calculations. Round your answer to two decimal places.Assume the risk-free rate is 3.5%. What are the Sharpe ratios for Stocks A and B? Do not round intermediate calculations. Round your answers to four decimal places.Stock A:Stock B: A paper distributor offers discounts to individuals who buy in quantity. They offer a 10 percent discount for orders of 50 -100 boxes of paper, a 20 percent discount for orders of 100 - 200, and a 30 percent discount for orders of 200 boxes or more. If Lee placed an order of 140 boxes (each box is $2.50), what would his discount and final price be? one of the unintended consequences of the social security act block grant system authorized in 1974 was: a four-timing-stage traffic signal has criticallane group flow ratios of 0.225, 0.175, 0.200, and0.150. if the lost time per timing stage is 5 secondsand a critical intersection v/c of 0.85 is desired,calculate the minimum cycle length and the timing how am i supposed to prove that theyre collinear need help! please give example if can The interest rate on debt, r, is equal to the real risk-free rate plus an inflation premium plus a default risk premium plus a liquidity premium plus a maturity risk premium. The interest rate on debt, r, is also equal to the -Select-purerealnominalCorrect 1 of Item 1 risk-free rate plus a default risk premium plus a liquidity premium plus a maturity risk premium.The real risk-free rate of interest may be thought of as the interest rate on -Select-long-termshort-termintermediate-termCorrect 2 of Item 1 U.S. Treasury securities in an inflation-free world. A Treasury Inflation Protected Security (TIPS) is free of most risks, and its value increases with inflation. Short-term TIPS are free of default, maturity, and liquidity risks and of risk due to changes in the general level of interest rates. However, they are not free of changes in the real rate. Our definition of the risk-free rate assumes that, despite the recent downgrade, Treasury securities have no meaningful default risk.The inflation premium is equal to the average expected inflation rate over the life of the security.Default means that a borrower will not make scheduled interest or principal payments, and it affects the market interest rate on a bond. The -Select-lowergreaterCorrect 3 of Item 1 the bond's risk of default, the higher the market rate. The average default risk premium varies over time, and it tends to get -Select-smallerlargerCorrect 4 of Item 1 when the economy is weaker and borrowers are more likely to have a hard time paying off their debts.A liquid asset can be converted to cash quickly at a "fair market value." Real assets are generally -Select-lessmoreCorrect 5 of Item 1 liquid than financial assets, but different financial assets vary in their liquidity. Assets with higher trading volume are generally -Select-lessmoreCorrect 6 of Item 1 liquid. The average liquidity premium varies over time.The prices of long-term bonds -Select-risedeclinevaryCorrect 7 of Item 1 whenever interest rates rise. Because interest rates can and do occasionally rise, all long-term bonds, even Treasury bonds, have an element of risk called -Select-reinvestmentinterestcompoundCorrect 8 of Item 1 rate risk. Therefore, a -Select-liquiditymaturityinflationCorrect 9 of Item 1 risk premium, which is higher the longer the term of the bond, is included in the required interest rate. While long-term bonds are heavily exposed to -Select-reinvestmentinterestcompoundCorrect 10 of Item 1 rate risk, short-term bills are heavily exposed to -Select-reinvestmentinterestcompoundCorrect 11 of Item 1 risk. Although investing in short-term T-bills preserves one's -Select-interestprincipalCorrect 12 of Item 1, the interest income provided by short-term T-bills is -Select-lessmoreCorrect 13 of Item 1 stable than the interest income on long-term bonds.Quantitative Problem:An analyst evaluating securities has obtained the following information. The real rate of interest is 3% and is expected to remain constant for the next 5 years. Inflation is expected to be 2.3% next year, 3.3% the following year, 4.3% the third year, and 5.3% every year thereafter. The maturity risk premium is estimated to be 0.1 (t 1)%, where t = number of years to maturity. The liquidity premium on relevant 5-year securities is 0.5% and the default risk premium on relevant 5-year securities is 1%.a. What is the yield on a 1-year T-bill? Round your intermediate calculations and final answer to two decimal places.%b. What is the yield on a 5-year T-bond? Round your intermediate calculations and final answer to two decimal places.%c. What is the yield on a 5-year corporate bond? Round your intermediate calculations and final answer to two decimal places.% Auguste Comte (1798 1857) introduced the idea of studying society scientifically; he is associated with the term positivism and ideas of social progress. Max Weber (1864 1920) is one of the founders of modern sociology; he is associated with the term Verstehen and the importance of symbols. Write a dialogue between Comte and Weber about the nature and goals of sociological research. Using everyday language rather than technical terms, the dialogue should reflect their differences regarding the following: Micro- versus macro-level orientations Objectivity versus subjectivity in sociological research Scientific, interpretive, and critical approaches to sociological investigation (10 points) Divide. Write the missingnumbers.62) 5,4721916R62 5 4 7 2"R91 6(Type whole numbers.) Can someone help me asap? Its due tomorrow. what was the purpose and overall meaning of building a winogradsky column and observing it throughout the semester? what did you learn about microbiology through this exercise? Amortization is the process by which a loan is repaid by a sequence of periodic payments, each of which is part payment of interest and part payment to reduce the outstanding principal. Let p(n) represent the outstanding principal after the nth payment g(n). Suppose that interest charges compound at the rate r per payment period. The formulation of our model here is based on the fact that the outstanding principal p(n + 1) after the (n+1)st payment is equal to the outstanding principal p(n) after the nth payment plus the interest rp(n) incurred during the (n + 1)st period minus the nth payment g(n). 1) Write the first-order difference equation and solve for p(n), assuming initial debt p(0) = p0. = 2) Find p(n) if the monthly payments are constant, i.e. g(n)= T and solve for T. 3) Solve for constant monthly payment for 30-year, $250,000 mortgage with 5% APR (Note: interest = APR/12) 4) If the borrower will pay additional $100/month after first 2 years, by how many months will the 30-year mortgage be shortened? 5) Plot relationship of additional payments after 2 years from $0-$1000 vs length of the mortgage period. es meet at right angles.) 6 m 2 m 3 m 5 m grass cement 2 m 4 m square meters 8 of 100 Which of these penalties would the Michigan Department of Licensing and Regulatory Affairs NOT impose for a violation of the Occupational Code? censure imprisonment revocation suspension 0 1 E DE Wypt to search