A net upward force of 1875 N acted on the elevator during its deceleration.
The net upward force on the descending elevator during deceleration, and to determine its acceleration kinematic equation is used:
[tex]v^{2}[/tex] =[tex]u^{2}[/tex] + 2as
where v is the final velocity (0 m/s), u is the initial velocity (-5 m/s, negative because it's downward), a is the acceleration, and s is the distance (10 m), Here, acceleration
0 =[tex]-5^{2}[/tex] + 2a(10)
0 = 25 - 20a
20a = 25
a = 1.25 [tex]m/s^{2}[/tex] (upward, so it's positive)
Calculate the net upward force (F_net) using Newton's second law, F_net = m_total * a. The total mass (m_total) of the elevator and occupants is 1000 kg + 500 kg = 1500 kg. Therefore, the net upward force is:
F_net = 1500 kg * 1.25 [tex]m/s^{2}[/tex]
F_net = 1875 N
So, the net upward force that acted on the elevator during its deceleration is 1875 N.
Know more about Newton's second law here:
https://brainly.com/question/25545050
#SPJ11
A pitcher supplies a constant force on a baseball whose mass is .14 kg. The pitcher's hand is in contact with the ball over a distance of 1.5m. The ball's speed as it is released is 40 m/s.
A) What force acted on the ball?
B) What was the change in momentum of the ball?
C) How long did the force act on the ball?
That the force (F) acting on the ball is the same as calculated in part A, we can rearrange the equation to solve for time (t):
Time (t) = Impulse (J) / Force (F)
What is Mass?
Mass is a fundamental property of matter that represents the amount of matter contained in an object. It is a scalar quantity and is typically measured in units such as kilograms (kg), grams (g), or other appropriate units depending on the scale of the object being measured.
The initial momentum (p_initial) of the ball can be calculated as the product of its mass and initial velocity:
Initial momentum (p_initial) = Mass (m) × Initial velocity (v_initial)
Since the ball is released with a speed of 40 m/s, the initial velocity (v_initial) is 40 m/s.
The final momentum (p_final) of the ball can be calculated as the product of its mass and final velocity:
Final momentum (p_final) = Mass (m) × Final velocity (v_final)
Since the ball is released with a speed of 40 m/s, the final velocity (v_final) is also 40 m/s.
The change in momentum (Δp) of the ball is the difference between the final and initial momenta:
Change in momentum (Δp) = Final momentum (p_final) - Initial momentum (p_initial)
Plugging in the values, we can calculate the force (F) acting on the ball:
Force (F) = Change in momentum (Δp) / Time (t)
B) The change in momentum (Δp) of the ball can be calculated as the final momentum (p_final) minus the initial momentum (p_initial):
Change in momentum (Δp) = Final momentum (p_final) - Initial momentum (p_initial)
C) The time (t) for which the force acts on the ball can be calculated using the formula for impulse, which relates force, change in momentum, and time:
Impulse (J) = Force (F) × Time (t)
Learn more about Mass from the given link
https://brainly.com/question/86444
#SPJ1
Tom goes outside on a 20 C day and knocks two pieces of wood together. If he hears the echo 0.554 seconds later, how far away is the wall?
A 2-kg ball moving at 6 m/s rolls into sand and comes out of the sand rolling at 2 m/s
The velocity of the ball as it exits the sand is 6m/s.
Explanation and Calculation of the Velocity of the Ball in MotionWhen the ball rolls into the sand, it experiences a force of friction acting against its motion, which causes it to slow down. The amount of frictional force depends on the properties of the sand and the ball's velocity. Assuming that the ball rolls horizontally into the sand and comes out horizontally as well, the conservation of momentum applies, which means that the momentum of the ball before it enters the sand is equal to the momentum of the ball after it exits the sand.
We can use the equation for conservation of momentum to calculate the final velocity of the ball:
Initial momentum = Final momentum
mv1 = mv2
where m is the mass of the ball, v1 is the initial velocity of the ball, and v2 is the final velocity of the ball.
Substituting the given values, we get:
2 kg x 6 m/s = 2 kg x v2
12 kg m/s = 2 kg x v2
v2 = 6 m/s
Therefore, the final velocity of the ball as it exits the sand is 6 m/s.
Learn more about momentum here:
https://brainly.com/question/1042017
#SPJ1
one engine works with constant power p and the other one increases its power linearly with time. what is the ratio of the work done by the engines (engine two to engine one) if the second engine increased its power from zero to 5.2 p during the observed time?
The work done by the second engine is 2.6 times the work done by the first engine.
The work done by an engine is given by the product of power and time. The first engine works with a constant power of P, so its work done is given by W1 = P*t, where t is the observed time.
The second engine increases its power linearly with time, and its final power is 5.2P. Let the power at time t be
P(t) = kt, where k is the rate of increase of power.
At time t=0, the power is zero, so we have
P(0) = 0.
At time t, the power is kt, so we have
P(t) = kt.
When the power reaches 5.2P, we have
P(t) = 5.2P
so kt = 5.2P, and k = 5.2P/t.
The work done by the second engine is given by
W₂ = ∫P(t)
dt from 0 to t, which evaluates to
W₂ = 1/2 × k × t²
= 1/2 × 5.2P ÷ t × t²
= 2.6P × t.
The ratio of the work done by the second engine to the first engine is
W2 ÷ W1 = (2.6P × t) ÷ (P × t) = 2.6.
To learn more about work length the link:
https://brainly.com/question/13662169
#SPJ4
A mechanic exerts a force of 55 N on a 0.015 m2 hydraulic piston to lift a small automobile. The piston the automobile sits on has an area of 2.4 m2. What is the weight of the automobile?
The force needed to lift the car is 8800 N, which is its weight.
What kind of forces do hydraulic systems produce?In hydraulic systems, forces are transferred from one area to another inside an incompressible fluid, such as water or oil. Most aircraft's landing gear and braking systems are hydraulic. In order to function, pneumatic systems need a compressible fluid like air.
The smaller piston received a 55 N force from the mechanic, and its surface area was 0.015 m². We may determine the pressure used by the mechanic using the pressure formula P = F/A:
P = F/A = 55 N / 0.015 m² = 3666.67 Pa
This pressure is transmitted to the larger piston with an area of 2.4 m². The force on the larger piston can be calculated using the formula F = PA:
F = PA = 3666.67 Pa x 2.4 m² = 8800 N
To know more about force visit:-
https://brainly.com/question/13191643
#SPJ1
what would happen if more mass was added to a 1.4-solar-mass neutron star? what would happen if more mass was added to a 1.4-solar-mass neutron star? it would grow larger, temporarily becoming a red giant again. it could eventually become a black hole, via a hypernova explosion. it would blow off mass as an x-ray burster. all of its protons and electrons would turn into quarks. it would erupt as a type i supernova.
Adding more mass to a 1.4-solar-mass neutron star can cause it to collapse into a black hole via a hypernova explosion.
How adding more mass to a neutron star can cause it into a black hole?If more mass was added to a 1.4-solar-mass neutron star, it could eventually become a black hole via a hypernova explosion. This is because the gravitational force within the star would increase, causing the star to contract and increase in density. As the density increases, the neutron star would become more and more unstable, and eventually, it would undergo a catastrophic collapse, causing a supernova explosion.
If the resulting remnant after the supernova explosion has a mass greater than about 2-3 solar masses, the gravitational force would be so strong that it would overcome the neutron degeneracy pressure and form a black hole. The process of this formation is known as a hypernova explosion, which is a type of supernova that produces a large amount of energy and ejects a significant amount of material into space.
Therefore, the most likely outcome if more mass is added to a 1.4-solar-mass neutron star is that it would eventually collapse into a black hole via a hypernova explosion.
Learn more about Hypernova explosion
brainly.com/question/31526957
#SPJ11
The carbon cycle describes the process in which carbon atoms continually travel from the atmosphere to the Earth and then back into the atmosphere. Examine the model. What are abiotic components of the carbon cycle? Choose ALL that apply
The carbon cycle involves both biotic (living) and abiotic (non-living) components.
What are the abiotic components of the carbon cycle?Abiotic components of the carbon cycle include:
Atmosphere: The atmosphere is a major abiotic component of the carbon cycle. Carbon dioxide (CO2) is a greenhouse gas that makes up a small percentage of Earth's atmosphere (currently around 0.04%). Carbon dioxide is released into the atmosphere through processes such as respiration, combustion of fossil fuels, and volcanic eruptions. It can also be absorbed from the atmosphere through processes such as photosynthesis and dissolution in bodies of water.
Oceans: The world's oceans are a significant abiotic component of the carbon cycle. They act as a sink for carbon dioxide, absorbing large amounts of it from the atmosphere. Carbon dioxide dissolves in seawater to form carbonic acid, which can then undergo various chemical reactions to form bicarbonate ions and carbonate ions. These dissolved forms of carbon can be transported and stored in the deep ocean for long periods of time, a process known as oceanic carbon sequestration.
Soil: Soil is another abiotic component of the carbon cycle. Dead plant material and other organic matter that accumulates in soil can undergo decomposition by microorganisms, releasing carbon dioxide back into the atmosphere through a process called soil respiration. Additionally, carbon can be stored in soil as organic carbon, which can remain in the soil for years to centuries depending on environmental conditions.
Geological formations: Carbon can also be stored in abiotic reservoirs such as geological formations, including fossil fuels such as coal, oil, and natural gas. These fossil fuels are formed from ancient organic matter that has been buried and preserved in the Earth's crust over millions of years. When these fossil fuels are burned for energy, carbon is released into the atmosphere as carbon dioxide, contributing to the increase in atmospheric carbon dioxide concentrations.
These abiotic components of the carbon cycle play a crucial role in regulating the balance of carbon between the atmosphere, oceans, soil, and geological formations, and are important in understanding the overall carbon cycle and its impact on the Earth's climate.
Learn more about carbon cycle here: https://brainly.com/question/12005308
#SPJ1
a binary star system in the constellation orion has an angular separation between the stars of 10-5 radians. assuming a wavelength of 500 nm, what is the smallest aperture (diameter) telescope that will just resolve the two stars? (1 nm
The smallest aperture (diameter) telescope that will just resolve the two stars is 5 cm.
The angular resolution (minimum resolvable angle) of a telescope can be calculated using the Rayleigh criterion, which states that two objects can be just resolved when the center of the diffraction pattern of one is directly over the first minimum of the diffraction pattern of the other. The formula for the angular resolution is:
θ = 1.22 λ / Dwhere θ is the angular resolution, λ is the wavelength of light, and D is the diameter of the aperture (telescope).
Substituting the given values, we get:
θ = 1.22 x 500 nm / Dθ = 0.61 µrad / DThe angular separation between the stars is given as 10-5 radians. To resolve the stars, the angular resolution of the telescope must be equal to or smaller than this value. Therefore:
θ = 0.61 µrad / D ≤ 10-5 radiansD ≥ 5 cmTherefore, the smallest aperture (diameter) telescope that will just resolve the two stars is 5 cm.
To learn more about telescope, here
https://brainly.com/question/556195
#SPJ4
The current through one resistor in a parallel resistor circuit is always (need help ASAP)
a. The same as the current in the other resistors in the circuit
b. Equal to the total current in the circuit.
c. More than the total current in the circuit.
d. Less than the total current in the circuit
In a parallel resistor circuit, the current through one resistor is not always the same as the current in the other resistors in the circuit. The correct answer is: d.
In a parallel resistor circuit, the current is split between the different branches of the circuit. The total current in the circuit is equal to the sum of the currents in each branch. Each resistor in a parallel circuit has a different resistance, which determines how much current flows through it. The resistor with the lowest resistance will have the highest current flowing through it, while the resistor with the highest resistance will have the lowest current flowing through it. Therefore, option d is correct.
To know more about parallel resistor circuit, here
brainly.com/question/29006457
#SPJ4
2.5-Newton's Third Law
An astronaut in deep space is at rest relative to a nearby space station. The astronaut needs to
return to the space station. A student makes the following claim: "The astronaut should
position her feet pointing away from the space station. Then, she should repeatedly move her
feet in the opposite direction to each other. This action will propel the astronaut toward the
space station." Is the student's claim correct? Justify your selection.
The student's claim is incorrect. According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction.
How is Newton's Third Law explained for a spacecraft?In this case, the force exerted by the astronaut on her feet is equal and opposite to the force exerted by the feet on the astronaut. Therefore, moving her feet in the opposite direction to each other will result in equal and opposite forces, which will cancel each other out and not propel the astronaut towards the space station.
To propel herself towards the space station, the astronaut needs to exert a force in the direction opposite to the direction of the space station. This can be achieved by using a jetpack or another propulsion system.
Find out more on space station here: https://brainly.com/question/18650677
#SPJ1
a guitar string has a total length of 92 cm and has a mass of 3.4 g. the distance from the bridge to the support post (the part that vibrates) is 62 cm, and the string is under a tension of 520 n. what is the frequency of the fundamental, in hz?
The frequency of the fundamental in Hz is 184.
The speed of the wave on the string is given by v = √(T/μ), where T is the tension in N and μ is the linear density of the string in kg/m.
μ = m/L, where m is the mass of the string in g and L is the length of the string in m.So, μ = 3.4 g / 0.92 m = 3.7 x 10⁻² kg/m
v = √(520 N / 3.7 x 10⁻² kg/m) = 365.7 m/sThe fundamental frequency is given by f = v/2L, where L is the length of the vibrating part of the string.
L = 62 cm = 0.62 mf = 365.7 m/s / (2 x 0.62 m) = 184 HzTo learn more about frequency of the fundamental, here
https://brainly.com/question/29264927
#SPJ4
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client?
Antipyretics protect vulnerable organs, such as the brain, from extreme temperature elevation.
Temperatures in excess of 99.5°F (37.5°C) can result in seizure activity.
Lower temperatures inhibit the protein synthesis of bacteria.
Most antipyretics have been shown to have little effect on core temperature but alleviate discomforts.
A client reports general malaise and has a temperature is 103.8°F (39.9°C). What is the rationale for administering a prescribed aspirin, an antipyretic, to this client
step-by-step explanation:
Step 1: A client reports general malaise and has a temperature of 103.8°F (39.9°C).
Step 2: The high temperature is an indication that the body is fighting an infection or inflammation.
Step 3: Antipyretics, such as aspirin, work by blocking the production of certain chemicals in the body that cause fever.
Step 4: Lowering the body temperature can help alleviate the discomfort associated with fever and reduce the risk of complications, such as seizures or dehydration.
Step 5: Aspirin is a commonly prescribed antipyretic that can be effective in reducing fever.
Step 6: The rationale for administering a prescribed aspirin, an antipyretic, to this client is to lower the body temperature and alleviate the discomfort associated with fever.
Step 7: It is important to follow the prescribed dosage and instructions for aspirin to avoid potential side effects or interactions with other medications.
Step 8: If the fever persists or worsens, it is important to seek medical attention to determine the underlying cause and ensure appropriate treatment.
To know more about Antipyretics :
https://brainly.com/question/30758739
#SPJ11
an fm radio station broadcasts at 94.8 mhz. calculate the wavelength of the corresponding radio waves.
The wavelength of a radio wave can be calculated using the formula:
wavelength (λ) = speed of light (c) / frequency (f)
where the speed of light (c) is approximately 3 x 10^8 meters per second.
In this case, the frequency (f) of the radio wave is 94.8 MHz.
However, this value needs to be converted to units of hertz (Hz) before using the formula.
1 MHz = 1 million Hz, so:
94.8 MHz = 94.8 x 10^6 Hz
Now, we can substitute the values into the formula:
λ = c / f
λ = 3 x 10^8 m/s / (94.8 x 10^6 Hz)
λ = 3.16 meters
Therefore, the wavelength of the radio wave broadcast by the station is approximately 3.16 meters.
To know more about wavelength visit link :
https://brainly.com/question/11304922
#SPJ11
a 130-w lamp is placed in series with a resistor and a 120-v source. if the voltage across the lamp is 32 v, what is the resistance r of the resistor?
The resistance r of the resistor which is placed in series with a 130-w lamp and a 120 V source is 21.66 Ω
According to the question,
Power of the lamp = 130 W
The voltage of the source = 120 V
The voltage across the lamp = 32 V
According to Kirchow's voltage Law,
The algebraic sum of voltage in a closed loop is zero.
So ∑V = [tex]V_{resistor}+V_{lamp}+V_{source}[/tex] =0
[tex]V_{Lamp}=-32 V[/tex]
[tex]V_{source}=120V[/tex]
0 = 120 - 32 + [tex]V_{resistor}[/tex]
[tex]V_{resistor}[/tex] = -88 V
Power of the lamp = V * I
130 = 32 * I
I = [tex]\frac{130}{32} A[/tex]
According to Ohm's Law,
V ∝ I
V = I*R
where V is the potential difference across the resistor
I is the current flowing through the resistor
R is the resistance of the resistor
Since the lamp and resistor are connected in series, they have the same amount of current flowing
Therefore, 88 = [tex]\frac{130}{32}[/tex] * r
r = [tex]\frac{88*32}{130}[/tex]
r = 21.66 Ω
Learn more about Ohm's Law:
https://brainly.com/question/19892453
#SPJ4
if a jar wrench whose handle extends 19 cm from the center of the jar is attached to the lid, what is the minimum force required to open the jar?
To calculate the minimum force required to open a jar using a jar wrench, we need to consider the torque required to overcome the friction between the lid and the jar.
The torque required to open a jar can be calculated using the formula:
Torque = Force x Distance
where Force is the minimum force required to open the jar, and Distance is the distance between the center of the jar and the point where the force is applied (in this case, the distance between the center of the jar and the end of the jar wrench handle, which is 19 cm).
The minimum force required to open the jar can be calculated by dividing the torque required by the radius of the lid.
Let's assume that the radius of the lid is 4 cm.
So, the minimum force required to open the jar is:
Force = Torque / Radius of the lid
To calculate the torque required, we need to estimate the force of friction between the lid and the jar. Let's assume that the force of friction is 0.2 times the weight of the jar, which is the typical range for a well-sealed jar.
So, the torque required to open the jar is:
Torque = Force of friction x Distance
Torque = 0.2 x Weight of the jar x Distance
Let's assume that the weight of the jar is 500 grams, which is equivalent to 4.9 N (Newtons), and the distance between the center of the jar and the end of the jar wrench handle is 19 cm.
So, the torque required to open the jar is:
Torque = 0.2 x 4.9 N x 19 cm
Torque = 1.86 N-cm
Now we can calculate the minimum force required to open the jar:
Force = Torque / Radius of the lid
Force = 1.86 N-cm / 4 cm
Force = 0.47 N
Therefore, the minimum force required to open the jar using a jar wrench with a handle that extends 19 cm from the center of the jar is approximately 0.47 N.
To know more about minimum force :
https://brainly.com/question/4580699
#SPJ11
a mechanic releases a small object with a density of 1.5 g/cm3 and a volume of 1.0 cm3 into a large vat of motor oil whose density is 888.1 kg/m3 . the container is 12.0 m deep with a diameter of 1.8 m. what will the magnitude and direction of its acceleration be if it is released from rest at a depth of 1.6m below the surface?
Using Archimedes' principle, the magnitude of the acceleration is 39.6 m/s², and the direction is upward.
To solve this problem, we need to use Archimedes' principle, which states that the buoyant force on an object in a fluid is equal to the weight of the fluid displaced by the object. The net force on the object is then the difference between its weight and the buoyant force, and its acceleration is given by Newton's second law (F = ma).
First, we need to calculate the weight of the object. The density of the object is 1.5 g/cm³, which is equivalent to 1500 kg/m3 (since 1 g/cm³ = 1000 kg/m³). The volume of the object is 1.0 cm³, which is equivalent to 0.000001 m³. Therefore, the weight of the object is:
w = m × g = (density × volume) × g = (1500 kg/m³ × 0.000001 m³) × 9.81 m/s² = 0.014715 N
where g is the acceleration due to gravity (9.81 m/s²).
Next, we need to calculate the weight of the fluid displaced by the object. At a depth of 1.6 m, the pressure of the fluid is:
p = density × g × h = 888.1 kg/m³ × 9.81 m/s² × 1.6 m = 13841.088 N/m²
where h is the depth of the object below the surface.
The area of the object is:
A = π × r² = π × (0.9 m)² = 2.54 m²
where r is the radius of the container (which is half of the diameter).
Therefore, the buoyant force on the object is:
Fb = p × A = 13841.088 N/m² × 2.54 m² = 35166.84 N
The net force on the object is:
Fnet = w - Fb = 0.014715 N - 35166.84 N = -35166.825 N
The negative sign indicates that the net force is upward, which means that the object will accelerate upward.
Finally, we can calculate the magnitude of the acceleration:
a = Fnet / m = Fnet / (density × volume) = -35166.825 N / (888.1 kg/m³ × 0.000001 m³) = -39.6 m/s²
Learn more about magnitude and direction at
https://brainly.com/question/29766788
#SPJ4
moment of inertia times angular velocity; measured in units of mass times units of velocity or expressed as kilogram-meters squared per second in si; a vector quantity.
The quantity that is expressed as the product of moment of inertia and angular velocity is known as angular momentum.
Angular momentum is a vector quantity and is measured in units of mass times units of velocity, which is equivalent to kilogram-meters squared per second in SI units. It represents the rotational analog of linear momentum and is important in understanding the conservation of angular momentum in rotating systems.
The concept of angular momentum, which involves moment of inertia and angular velocity. Angular momentum (L) is the product of an object's moment of inertia (I) and its angular velocity (ω). It can be represented mathematically as:
L = I * ω
To know more about moment of inertia:
https://brainly.com/question/30051108
#SPJ11
The moment of inertia times angular velocity is a measure of rotational motion and is expressed as the ˘ of the moment of inertia and the angular velocity. The units of velocity are typically meters per second (m/s) or radians per second (rad/s), depending on the context.
The units of moment of inertia are kilograms times meters squared (kg x m²). When these units are multiplied together, the resulting unit is kilogram-meters squared per second (kg x m²/s), which is the SI unit for angular momentum. Since angular momentum is a vector quantity, it has both magnitude and direction.
I is the moment of inertia, a measure of an object's resistance to rotational motion, and is typically determined by the object's mass distribution and geometry.
ω is the angular velocity, a measure of how fast an object rotates about a specific axis, and is typically expressed in radians per second (rad/s).
To learn more about Angular velocity Here:
https://brainly.com/question/29557272
#SPJ11
A rifle has a mass of 45 kg. The bullet that it fires travels at 300 m/s. The mass of the bullet is 0.01 kg. What is the velocity of the rifle after it recoils?
Assuming the rifle recoils in the same direction as the bullet, the velocity of the rifle after recoil would be 5.44 m/s.
What is velocity ?Velocity is a vector quantity that measures the rate of change in the position of an object. It is expressed as a speed and a direction. Velocity is a measure of the rate and direction of motion of an object, and is equal to the displacement of the object divided by the time taken for the displacement. The units of velocity are usually expressed in terms of meters per second (m/s).
This can be calculated using the equation of conservation of momentum, which states that the total momentum of a system must remain constant. Thus, the momentum of the bullet (0.01 kg× 300 m/s) must be equal to the momentum of the rifle (45 kg× v), where v is the velocity of the rifle after recoil. Solving for v yields 5.44 m/s.
To learn more about velocity
https://brainly.com/question/80295?
#SPJ1
a series circuit has a total resistance of 180 ω and a total voltage of 120 v. what is the current flow?
To find the current flow in a series circuit with a total resistance of 180 ω and a total voltage of 120 V, we can use Ohm's law,(Ohm’s law states the relationship between electric current and potential difference. The current that flows through most conductors is directly proportional to the voltage applied to it. Georg Simon Ohm, a German physicist was the first to verify Ohm’s law experimentally.)
which states that current (I) equals voltage (V) divided by resistance (R), or
I = V/R. Therefore, the current flow in this circuit would be:
I = 120V/180Ohm
I = 0.67 amperes (A)
So, the current flow in this series circuit is 0.67 A.
To know more about Ohm's law, please click:
brainly.com/question/1247379
#SPJ11
a loop of area 0.08 m2 is rotating at constant angular speed. it rotates at 87 rev/s with the axis of rotation perpendicular to a 0.08 t magnetic field. if there are 1017 turns on the loop, what is the maximum voltage induced in it? answer in units of v.
The maximum voltage induced in the loop is 82.05 volts. The EMF is negative.
The maximum voltage induced in the loop can be calculated using the formula:
EMF = -NΔΦ/Δt
Where EMF is the induced electromotive force, N is the number of turns in the loop, ΔΦ is the change in magnetic flux, and Δt is the time interval over which the change occurs.
In this case, the loop has an area of 0.08 m2 and is rotating at a constant angular speed of 87 rev/s, which corresponds to an angular velocity of 544.89 rad/s. The magnetic field is perpendicular to the axis of rotation, so the change in magnetic flux is given by:
ΔΦ = B*A*cos(θ)*Δt
Where B is the magnetic field strength, A is the area of the loop, θ is the angle between the magnetic field and the normal to the loop (which is 90 degrees in this case), and Δt is the time interval over which the change occurs.
Since the loop is rotating at a constant speed, the time interval over which the change occurs is equal to the time it takes for the loop to complete one revolution, which is:
Δt = 1/87 s
Plugging in the given values, we get:
ΔΦ = (0.08 T)*(0.08 m2)*(1)*(1/87 s) = 0.000921 Tm2/s
Next, we can calculate the induced EMF using the formula:
EMF = -NΔΦ/Δt
Plugging in the given values, we get:
EMF = -(1017)*(0.000921 Tm2/s)/(1/87 s) = -82.05 V
Since the EMF is negative, this means that the induced voltage is in the opposite direction to the direction of the current flow in the loop.
For more such questions on EMF.
https://brainly.com/question/14300059#
#SPJ11
inelastic collisions in one dimension: a 5.00-kg ball is hanging from a long but very light flexible wire when it is struck by a 1.50-kg stone traveling horizontally to the right at 12.0 m/s. the stone rebounds to the left with a speed of 8.50 m/s, and the ball swings to a maximum height h above its original level. the value of h is closest to
We can solve this problem using conservation of momentum and conservation of energy.
First, we can find the initial momentum of the system before the collision:
[tex]p_i = m_stone * v_stone[/tex] = 1.50 kg * 12.0 m/s = 18.0 kg m/s
After the collision, the stone rebounds to the left with a speed of 8.50 m/s, so we can find its final momentum:
[tex]p_f = m_stone * v'_stone = 1.50 kg * (-8.50 m/s)[/tex]= -12.75 kg m/s
The ball and the stone move together after the collision, so their final velocity is the same. Let's call it v_f. We can find the final momentum of the system:
[tex]p_f = (m_ball + m_stone) * v_f[/tex]
Since momentum is conserved, we can set p_i = [tex]p_f[/tex]and solve for v_f:
[tex]v_f = p_i / (m_ball + m_stone) = 18.0 kg m/s / (5.00 kg + 1.50 kg)[/tex]= 3.0 m/s
Now we can use conservation of energy to find the maximum height h that the ball reaches. At the maximum height, all of the kinetic energy has been converted to potential energy:
[tex]1/2 * (m_ball + m_stone) * v_f^2 = (m_ball + m_stone) * g * h[/tex]
Solving for h, we get:
[tex]h = v_f^2 / (2 * g) = 3.0 m/s^2 / (2 * 9.8 m/s^2) = 0.153 m[/tex]
So the value of h is closest to 0.153 m.
To learn more about inelastic collisions here
https://brainly.com/question/29220028
#SPJ4
what is the moment of inertia of this system, about an axis perpendicular to the page and passing through the point where the rods touch?
The moment of inertia is 2.98 kg*m^2.
Moment of inertia about point of contact and perpendicular axis?To find the moment of inertia of the system, we need to consider the contributions of each object to the moment of inertia and add them up using the parallel axis theorem. Let's label the two rods A and B.
The moment of inertia of rod A about an axis passing through its center of mass and perpendicular to the rod is:
I_A = (1/12)M_AL_A^2
where M_A is the mass of rod A and L_A is its length.
Similarly, the moment of inertia of rod B about an axis passing through its center of mass and perpendicular to the rod is:
I_B = (1/12)M_BL_B^2
where M_B is the mass of rod B and L_B is its length.
To use the parallel axis theorem, we need to find the distance between the axis of rotation and the center of mass of each object. Let's call this distance r. For rod A, r is half the length of the rod, since the axis of rotation passes through the center of the rod where it touches rod B. So:
r_A = L_A/2
For rod B, r is the distance from its center of mass to the point where it touches rod A. The center of mass of rod B is at a distance of L_B/2 from the end that touches rod A, so:
r_B = sqrt[(L_B/2)^2 + (L_A/2)^2]
Now we can use the parallel axis theorem to find the total moment of inertia:
I_total = I_A + I_B + M_Ar_A^2 + M_Br_B^2
Plugging in the values, we get:
I_total = (1/12)2.00 kg(0.800 m)^2 + (1/12)3.00 kg(1.20 m)^2 + 2.00 kg*(0.400 m)^2 + 3.00 kg*sqrt[(0.400 m)^2 + (0.600 m)^2]^2
Simplifying, we get:
I_total = 2.98 kg*m^2
Therefore, the moment of inertia of the system about an axis perpendicular to the page and passing through the point where the rods touch is 2.98 kg*m^2.
Learn more about moment of inertia
brainly.com/question/29415485
#SPJ11
at the sea level the airplane can takeoff at the speed of 150mi/hr. what is the required takeoff speed at albuquerque
To determine the required takeoff speed at Albuquerque, we need to consider the difference in air density between sea level and the altitude of Albuquerque.
As altitude increases, air density decreases, which can have a significant effect on aircraft performance.
In particular, the reduced air density means that the airplane needs to achieve a higher ground speed in order to generate enough lift to take off.
To calculate the required takeoff speed at Albuquerque, we can use the following equation:
V2 = V1 x √(rho2/rho1)
where:
V1 = takeoff speed at sea level (given as 150 mph)
rho1 = air density at sea level (standard value of 1.225 kg/m^3)
rho2 = air density at Albuquerque (can be looked up or calculated using atmospheric models)
V2 = required takeoff speed at Albuquerque (what we want to find)
Let's assume that Albuquerque is at an altitude of 5,312 feet (the airport elevation).
Using atmospheric models or tables, we can find that the air density at this altitude is approximately 0.860 kg/m^3.
Now we can substitute the values into the equation:
V2 = 150 mph x √(0.860 kg/m^3 / 1.225 kg/m^3)
V2 = 150 mph x 0.806
V2 = 121 mph (rounded to the nearest whole number)
Therefore, the required takeoff speed at Albuquerque is approximately 121 mph. This is lower than the takeoff speed at sea level due to the reduced air density at higher altitudes.
To know more about speed visit link :
https://brainly.com/question/13780167
#SPJ11
24. given perfect lenses, what is the main reason that a telescope with a large-diameter objective lens can produce a sharper image than one with a small-diameter lens?
A larger objective lens allows more light to enter, reducing the effects of diffraction, and increasing angular resolution, resulting in a sharper image.
The primary factor that contributes to a telescope's bigger objective lens producing a sharper image than a telescope with a smaller objective lens is that the larger objective lens enables more light to enter the telescope, which minimises the effects of diffraction. The image becomes blurry and loses information due to diffraction, especially at high magnifications.
A bigger objective lens's enhanced capacity for light collection also enables a higher signal-to-noise ratio, which produces a picture with more clarity and contrast. Last but not least, a bigger objective lens can accommodate a higher angular resolution, enabling the picture to resolve more information.
Learn more about the lens:
https://brainly.com/question/14055649
#SPJ4
The correct question will be: What are the three main advantages of a telescope with a bigger objective lens compared to one with a smaller objective lens?
at what speed do a bicycle and its rider, with a combined mass of 90 kg , have the same momentum as a 1600 kg car traveling at 4.8 m/s ? express your answer to two significant figures and include the appropriate units.
when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? a sinusoidal curve a circle a straight line a parabola
When a charged particle moves perpendicularly to a uniform magnetic field, its trajectory is a circle. Here option B is the correct answer.
When a charged particle moves perpendicularly to a uniform magnetic field, its trajectory follows a circular path. This phenomenon is known as the Lorentz force, named after the Dutch physicist Hendrik Lorentz who discovered it in the late 19th century.
The Lorentz force arises due to the interaction between the magnetic field and the charged particle's electric field. When a charged particle moves through a magnetic field, it experiences a force perpendicular to both the direction of its motion and the direction of the magnetic field. This force causes the charged particle to move in a circular path with a constant radius and a constant speed.
The radius of the circular path is determined by the particle's mass, charge, and speed, as well as the strength of the magnetic field. Specifically, the radius is proportional to the particle's momentum and inversely proportional to the magnetic field strength.
The circular motion of a charged particle in a magnetic field is fundamental to many applications in physics and engineering. For example, it is the basis of the operation of particle accelerators, mass spectrometers, and MRI machines.
To learn more about magnetic fields
https://brainly.com/question/3160109
#SPJ4
Complete question:
When a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory? when a charged particle moves perpendicularly to a uniform magnetic field, what best describes its trajectory?
A - a sinusoidal curve
B - a circle
C - a straight line
D - a parabola
compared to the buoyant force of the atmosphere on a 1-kilogram iron block, the buoyant force on a nearby 1-kilogram helium-filled balloon is group of answer choices the same. considerably less. considerably more.
The buoyant force on a 1-kilogram helium-filled balloon will be considerably more than the buoyant force of the atmosphere on a 1-kilogram iron block.
The buoyant force is the force exerted by a fluid, such as air or water, on an object that is submerged in it. It is equal to the weight of the fluid displaced by the object.
In this case, we are comparing the buoyant force of the atmosphere on a 1-kilogram iron block to the buoyant force on a nearby 1-kilogram helium-filled balloon.
Helium is a gas that is much less dense than air, which means that it will displace a larger volume of air than the iron block of the same mass.
Therefore, the buoyant force on the helium-filled balloon will be considerably more than the buoyant force on the iron block. This is because the buoyant force is directly proportional to the volume of fluid displaced by the object.
To learn more about : buoyant
https://brainly.com/question/28464280
#SPJ11
7. a high-frequency photon is scattered off of an electron andexperiences a change of wavelength of 1.7 x 10-4 nm at whatangle must a detector be placed to detect the scattered photon(relative to the direction of the incoming photon)?
The detector must be placed at an angle of approximately 0.003 degrees relative to the direction of the incoming photon to detect the scattered photon.
This formula relates the change in wavelength of the scattered photon to the scattering angle and the rest mass of electron.
Δλ = h/mc (1 - cosθ)
Rearranging the formula to solve for θ, we get:
cosθ = 1 - (Δλ mc)/h
Plugging in the given values, we get:
cos\theta = 1 - [(1.7 * 10^{-4} nm) * (9.11 * 10^{-31} kg) * (3 * 10^{8} m/s)] / \\(6.626 * 10^{-34} J.s)
cosθ ≈ 0.999996
θ ≈ 0.003 degrees
To know more about wavelength, here
brainly.com/question/31143857
#SPJ4
a father with twice the mass of his daughter is watching her skate as he is standing still on ice with his skates on. she approaches him with speed v and then grabs him so that it is a perfectly inelastic collision. at what speed do the two of them move, i.e. what is their center of mass velocity? assume the ice is frictionless and there is no wind resistance.
The center of mass velocity after the perfectly inelastic collision is Vf = v/3.
To determine the center of mass velocity after the perfectly inelastic collision between the father and daughter on frictionless ice with no wind resistance.
Step 1: Assign variables to the given information.
Let the mass of the father be 2m and the mass of the daughter be m. The daughter approaches the father with a speed of v, and the father is initially at rest.
Step 2: Apply the conservation of momentum principle.
In a collision, the total momentum before the collision equals the total momentum after the collision. Let Vf represent the final velocity of both the father and daughter after the collision. The initial momentum is given by:
p_initial = (mass_daughter × v_daughter) + (mass_father × v_father)
Since the father is initially at rest, his initial velocity is 0:
p_initial = (m × v) + (2m × 0) = m × v
Step 3: Calculate the total momentum after the collision.
After the collision, the combined mass of the father and daughter is 2m + m = 3m. The final momentum is:
p_final = (mass_combined) × Vf = (3m) × Vf
Step 4: Set the initial momentum equal to the final momentum and solve for the final velocity, Vf.
m × v = (3m) × Vf
Divide both sides by 3m:
Vf = (m × v) / (3m)
The mass m cancels out:
Vf = v / 3
You can learn more about the center of mass at: brainly.com/question/29576405
#SPJ11
what voltage must be applied between the filament and target so that electrons interacting with mole-cules at the point marked ss (sample source) will have 70 ev of kinetic energy?
The voltage of approximately 437.5 V must be applied between the filament and target to achieve 70 eV of kinetic energy for the electrons at the sample source (ss).
To determine the voltage needed for electrons to have 70 eV of kinetic energy at the sample source (ss), we can use the equation for kinetic energy (KE) of an electron, which is KE = 1/2 * m * v^2, where m is the mass of the electron and v is its velocity.
However, we can also utilize the relationship between energy and voltage: KE = eV, where e is the elementary charge (1.6 × 10^-19 C) and V is the applied voltage.
Since we want the electrons to have 70 eV of kinetic energy, we can set KE equal to 70 eV and solve for the voltage V:
70 eV = (1.6 × 10^-19 C) * V
To find V, divide both sides by the elementary charge:
V = 70 eV / (1.6 × 10^-19 C) ≈ 437.5 V
To learn more about : voltage
https://brainly.com/question/1176850
#SPJ11