a disk-shaped platform has a known rotational inertia. the platform is mounted on a fixed axle and rotates in a horizontal plane, as shown above. a student wishes to determine the frictional torque exerted on the platform by the axle as the platform rotates. the student has access to equipment that would usually be found in a school physics laboratory. describe an experimental procedure the student could use to collect the data needed to find the frictional torque exerted on the platform while it rotates.

Answers

Answer 1

An experimental procedure the student could use to collect the data needed to find the frictional torque exerted on the platform while it rotates are given below.

What do you mean by intertia?

In physics, inertia is the property of an object to resist changes in its motion. It is the tendency of an object to remain at rest or in motion in a straight line at a constant velocity unless acted upon by an external force.

Inertia is related to an object's mass, which is a measure of the amount of matter an object contains. This means that an object with more mass will be more difficult to accelerate, stop, or change its direction of motion compared to an object with less mass.

The student could use the following experimental procedure to determine the frictional torque exerted on the platform while it rotates:

Start by measuring the rotational inertia of the platform using a rotational motion sensor and a known mass added to the platform.Next, mount the platform on the fixed axle and rotate it using a motorized pulley system. Measure the angular velocity of the platform as it rotates.Apply a known torque to the platform using a torque wrench and measure the angular acceleration of the platform.Using the measured angular velocity and angular acceleration, calculate the net torque acting on the platform using the equation torque = I * alpha where I is the rotational inertia of the platform and alpha is the angular acceleration.Repeat step 3 for different values of torque and record the results.The frictional torque on the platform can be calculated by subtracting the net torque from the applied torque.Repeat the above steps at different angular velocities and at different temperatures to check for temperature dependency of the frictional torque.Plot the results of the frictional torque as a function of angular velocity and temperature.

By repeating this procedure for different known torques, the student can determine the frictional torque acting on the platform by comparing the applied torque to the measured net torque.

To know more about torque visit:

https://brainly.com/question/19104073

#SPJ4


Related Questions

A 3. 8-mole sample of an ideal gas is gently heated at a constant temperature of 340 K. The gas expands to 2. 3 times its initial volume. What is the change in the internal energy of the gas? Let the ideal-gas constant R=8. 314 (mol x K)

Answers

The change in internal energy of an ideal gas is 826.9 J. Internal energy, represented by the symbol U, is the total energy of a system.

The change in internal energy of an ideal gas can be calculated using the equation:

ΔU = nCΔT

where ΔU is the change in internal energy, n is the number of moles of gas, C is the heat capacity at constant volume, and ΔT is the change in temperature.

Since the heat capacity at constant volume for an ideal gas is (3/2)R, we can use the ideal-gas equation to find the number of moles n = PV/RT = (810^-3 m^3)(101325 Pa)/(8.314 J/molK)(340 K) = 0.965 mol

We know that the volume of the gas expanded to 2.3 times its initial volume, thus the change in volume is 2.3 - 1 = 1.3 times

The change in internal energy can be calculated by using the equation:

ΔU = nCv(ΔT) + nRT ln(Vf/Vi)

where Cv is the heat capacity at constant volume = (3/2)R, T is the temperature, and Vf and Vi are the final and initial volume respectively.

So, ΔU = 0.965 x (3/2) x 8.314 x (340) + 0.965 x 8.314 x 340 x ln(2.3) = 826.9 J

Therefore, the change in internal energy of the gas is 826.9 J.

To know more about ideal gas please refer: https://brainly.com/question/28257995

#SPJ4

how do we known the sun rotates

Answers

Answer: Through observing the motion of sunspots

Explanation:

Answer:

The Sun spins on its axis once every 27 days. Its rotation had been initially discovered by watching the movement of sunspots. Because the Sun's rotational axis is tilted by around 7.25 degrees first from the direction of the Earth's orbit, humans observe more of the Sun's north pole in September & more of the south pole in March.

A soccer player kicks a ball moving in a straight line
towards the field goal, causing it to accelerate into the field
goal.
O Negative work is done on the ball.
Positive work is done on the ball.
O No work was done on the ball.
O Negative work was done on the field.

Answers

When the force applied on the ball causes it o accelerate into the field

goal, Positive work is done on the ball.

option B.

What is work done?

A work is said to be done when an applied force causes a displacement of an object.

Mathematically, the formula for work done is given as;

W = Fd

where;

F is the applied forced is the displacement of the object

Thus, when  a soccer player kicks a ball moving in a straight line

towards the field goal, causing it to accelerate into the field goal, the work done on the ball is a Positive work.

Learn more about positive work here: https://brainly.com/question/28104809

#SPJ1

waves on a swimming pool propagate at 0.643 m/s. you splash the water at one end of the pool and observe the wave go to the opposite end, reflect, and return in 36.7 s. how far away is the other end?

Answers

The other end of the pool is approximately 24.2 meters away.

What is pool?

Pool is a game played on a table with six pockets, in which players use a cue stick to hit balls into the pockets. The game is enjoyed by people of all ages, and is especially popular in the United States and Europe.

The other end of the pool is approximately 24.2 meters away. This can be determined using the equation
speed = distance/time
In this case, the speed of the wave is 0.643 m/s, the time is 36.7 s, and the distance is unknown. We can rearrange the equation to solve for the distance:
distance = speed * time
Therefore, the distance is 0.643 m/s * 36.7 s = 24.2 m. This means that the other end of the pool is approximately 24.2 meters away.

To learn more about pool
https://brainly.com/question/12910619
#SPJ4

a 0.11-kg tin can is resting on top of a 1.7-m high fence post. a 0.0020-kg bullet is fired horizontally at the can. it strikes the can with a speed of 900.0 m/s, passes through it, and emerges with a speed of 720 m/s. when the can hits the ground, how far is it from the fencepost? disregard friction while the can is in contact with the post.

Answers

It is 1.93 metres away from the post.

for vertical motion

[tex]S= u t + \frac{1}{2} g t^{2}[/tex]

S = 0 +  [tex]\frac{1}{2} g t^{2}[/tex]

1.7 = [tex]\frac{1}{2} 9.8 t^{2}[/tex]

t = 0.589 sec

using law of  conservation of momentum, on the horizontal motion

[tex]m_{bullet} \ v_{bullet i} = m_{bullet} \ v_{bullet f} + m_{tin} \ v_{tin}[/tex]

[tex]0.0020 = 0.0020 \ 3 \ 720 + 0.11 \ v_{tin}[/tex]

[tex]v_{tin}[/tex] = 3.273 m/s

S = [tex]v_{tin} \ t[/tex]

   = 3.273 m/s * 0.589 s

   = 1.93 m

To know more about momentum

brainly.com/question/29113044

#SPJ4

What is the equivalent resistance of a number of identical resistances (n), each of resistance (R), when
connected in series?
1)nR
2)R/n
3)n/R
4)n*2R

Answers

Answer:

Explanation: It's R/n

Cedric and Insha solved the same equation using the calculations below.

Cedric’s Work
Insha’s Work
z minus 4.5 = negative 1.5. z minus 4.5 + 4.5 = negative 1.5 + 4.5. z = 3.
z minus 4.5 = negative 1.5. z minus 4.5 + (negative 4.5) = negative 1.5 + (negative 4.5). z = negative 6.

Which statement is true about their work?
Cedric is correct because he used the inverse of subtraction and added 4.5.
Cedric is incorrect because he should have subtracted 4.5 from both sides instead of adding.
Insha is correct because she added the opposite if 4.5, which is Negative 4.5, to both sides.
Insha is incorrect because she did not add Negative 1.5 + (negative 4.5) correctly.

Answers

Answer:

Explanation:

Cedric is correct because he used the inverse of subtraction and added 4.5

when an object reaches terminal velocity its acceleration is

Answers

When an object reaches terminal velocity its acceleration becomes zero.

Terminal velocity is also called constant velocity. When there is no acceleration in the moving object. We can take the example of sedimentation.

Sedimentation is the process of settling down the soil particles at the bottom of the water. When soil particles comes down in water there are three forces which act on the particles. Downward force is weight of the particle. Upward force buoyant force of the water, and drag force. When upward forces become equal to the downward force then particles begins to settle down with a constant velocity. which is called terminal velocity.  

To know more about acceleration, here

https://brainly.com/question/12550364

#SPJ4

at what speed do a bicycle and its rider, with a combined mass of 120 kg , have the same momentum as a 1200 kg car traveling at 5.0 m/s ? express your answer to two significant figures and include the appropriate units.

Answers

The speed of a bicycle and its rider with a combined mass of 120 Kg is 50m/s.

It is given that a car of mass 1200 kg is traveling at a speed of 5.0 m/s.

                           momemtum of the car = mass × speed

                                                                 = 1200 × 5

                                                                 = 6000 kg m/s

It is given that the bicycle and its rider will also be having the momentum same as the car. Therefore, the momentum of the bicycle = 6000 kg m/s.

       Mass of the bicycle = 120 kg.

                                 momentum of the bicycle = mass × speed

                                                  [tex]speed = \frac{6000}{120} \\\\ speed = 50 m/s[/tex]    

Therefore, the speed of the bicycle and its rider = 50 m/s      

                                   

To know more about momentum, visit: https://brainly.com/question/924303

#SPJ4

if the earth were of uniform density, what would be the value of g inside the earth at half its radius? (the value of g at the surface of earth is 9.8 m/s2 .) select all that apply 1. 4.9 m/s2 2. 9.8 m/s2 3. 39.2 m/s2 e4. 19.6 m/s

Answers

The value of g inside the earth at half of its radius is 4.9 m/s², if the value of g at the surface of the earth is 9.8 m/s².

Let the uniform density of the earth, = ρ

Radius of the earth, = R

We know the relation between the uniform density(ρ) of the earth and the acceleration due to gravity of the earth is as follows:

g = Gρ(4/3)πR

Let the value of acceleration due to gravity at (r = R/2) is g₁.

Then g₁ = Gρ(4/3)π(R/2)

g₁ = (1/2)Gρ(4/3)π(R)

g₁ = (1/2) × g

g₁ = (1/2) × 9.81 = 4.9 m/s²

Hence the correct option is 1.

To know more about density, here

https://brainly.com/question/29775886

#SPJ4

cells in the eye detect light
and dark. What word completes the
sentence?
Enter your answer

Answers

"Rod cells in the eye detect light and dark." completes the sentence.

What is light?

Light is defined as electromagnetic radiation visible to the human eye with wavelengths ranging from 380 to 750 nm. Light is a type of electromagnetic radiation that enables or makes objects visible to the human eye. It's also known as visible radiation to the eye. Light contains photons, which are tiny packets of energy. Lux (lx) (lx) The unit of illumination is the lux, which is equal to one lumen per square metre. The metric equivalent of footcandles is one lux equals 0.0929 footcandles.

Here,

"In the eye, rod cells detect light and dark." completes the sentence.

To know more about rod cells,

https://brainly.com/question/9695421

#SPJ1

If a battery produces a voltage of 53V and a resistance of 31 Ohms, calculate the current.

Answers

I don’t know for sure

if replacing the lights with a fluorescent bulb would save 60 w per night, what savings in kwh does this represent in one year?

Answers

The savings in kWh from replacing the lights with a fluorescent bulb in one year is 496.4 kWh/yr.

Evaluating :

Saving power = 60 w per night .

340 J/s ( 4h/d)(3600 sec/h) (365 d/yr)

( 1kWh/ 3.6 x 10 6 J)

= 496.4 kWh/yr

Which unit represents energy?

The capacity to perform work is a definition of energy. When energy is released, a body performs the same amount of work as it has energy stored. Scalar energy is a quantity. Joule is the SI unit for energy. 1 joule of energy is the amount of energy required to perform one joule of work.

What is the energy rule?

According to the law of conservation of energy, energy can only be changed from one form to another rather than being created or destroyed. Unless energy is added from the outside, a system always has the same amount of energy.

Learn more about energy:

brainly.com/question/2003548

#SPJ4

In a 24 s interval, 228 hailstones strike a glass

window of area 0. 788 mº at an angle 20° to the

window surface. Each hailstone has a mass of

4g and speed of 8. 3 m/s.

If the collisions are elastic, find the average

force on the window.

Angwar in units of N.

Answers

The average force acting on a given area is 21.98 Pa.

What is force?

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate. Intuitively, force can be described as a push or a pull. A force is a vector quantity because it has both magnitude and direction.

Here,

Force = Mass X acceleration = 0.004kg x 9.8. This is when the hailstone is not inclined at an angle.

When the hailstone is inclined at an angle of 45, then the component of force along the glass window will be F =0.004kg x 9.8 x sin20= 0.005kg x 9.8 x 0.707= 0.0357N.

Therefore, total force for the 500 hailstones would be 500x0.0357N=17.85N

This force is acting on an area equal to 0.788m2

Pressure = Force per unit area = 17.32N/0.788m2 = 21.98Pa

The force is acting on an area known as average force is 21.98 Pa.

To know more about force,

https://brainly.com/question/29044739

#SPJ4

electrons are accelerated by a 1000-v potential drop. (a) calculate the de broglie wavelength. (b) calculate the wave- length of the x-rays that could be produced when these elec- trons strike a solid.

Answers

The de Broglie wavelength of the electron is 2.212 x 10-11 m.

What is Broglie wavelength?

The de Broglie wavelength is a concept in quantum mechanics which states that all matter has a wave-like nature, and can thus be described as a wave.

(a) The de Broglie wavelength (λ) of a particle is given by the equation: λ = h/p, where h is Planck's constant (6.626 x 10-34 J.s) and p is the momentum of the particle.
The momentum of an electron with a 1000-V potential drop is given by the equation p = eV/c,
where e is the electron charge (1.602 x 10-19 C) and c is the speed of light (2.998 x 108 m/s).
Therefore, the de Broglie wavelength of the electron is:
λ = h/(eV/c) = (6.626 x 10-34 J.s) / (1.602 x 10-19 C x 1000 V/2.998 x 108 m/s) = 2.212 x 10-11 m.

(b) X-rays are produced when high-energy electrons strike a solid.
The wavelength of the x-ray is inversely proportional to the energy of the electron.
The energy of the electron is equal to the potential drop, i.e. 1000 eV. Therefore,
the wavelength of the x-ray produced is: λ = hc/eV = (6.626 x 10-34 J.s x 2.998 x 108 m/s)/(1.602 x 10-19 C x 1000 eV) = 1.246 x 10-10 m.

To learn more about Broglie wavelength
https://brainly.com/question/15330461
#SPJ4

A net force pushing a 15 kg wagon on a level road results in an acceleration of 2 m/s².
What is the net force?

Answers

Answer:

30N

Explanation:

As we know that ,

Force = mass * acceleration

so substitute the respective values,

F = 15kg * 2m/s²

F = 30N

and we are done!

two point charges exert a 5.00 n force on each other. what will the force become if the distance between decreases by a factor of 2 (i.e. distance becomes 1/2 of original)?

Answers

Answer:55

Explanation: hope thi heps!

A heat engine of efficiency e that operates between high temperature TH and low temperature TC. What is the range of possible values of e?

Answers

The ratio of the engine's work, W, to the heat absorbed from the high-temperature heat source, QH, is the measure of a heat engine's efficiency, or e. In mathematical terms, it looks like:e = W/QH

According to the second law of thermodynamics, the maximum efficiency of a heat engine, also known as the Carnot efficiency, eC, is equal to the difference between the temperatures TH and TC:

eC = 1 - (TC/TH) The Carnot efficiency is the maximum efficiency of a theoretical heat engine, also known as a Carnot engine, which operates between two temperatures TH and TC and is thought to be the most efficient heat engine possible.

Therefore, the following is the range of possible e values for a heat engine operating between TH and TC:

0 e eC = 1 - (TC/TH), indicating that a heat engine's efficiency cannot exceed the Carnot efficiency and cannot fall below 0.

How does Carnot Efficiency work?

A heat engine's maximum theoretical efficiency is measured by the Carnot efficiency, after the French engineer Sadi Carnot. The ratio of the heat engine's work to the heat absorbed from the higher-temperature heat source is what is used to define it. It is calculated as follows:

eC is equal to 1 - (TC/TH), where TC is the cold reservoir temperature and TH is the hot reservoir temperature.

To know more about Carnot efficiency :

brainly.com/question/14470167

#SPJ4

the radius of earth is about 6400 km. an 8200 n spacecraft travels away from earth.what is the weight 43200 km above earth's surface?

Answers

The weight of an 8200 N spacecraft when it is 43200 km above earth's surface is 136.5 N

The formula for the gravitational force between two objects is:

F = GMm/r²

Where:

G = gravitational constant

M, m = mass of the objects

r = distance between objects.

Notice that the gravitational force is inversely proportional to the square of the distance.

Hence,

F1 : F2 = (r2)² : (r1)²

In this case:

r1 = 6400

r2 = 6400 + 43200 = 49600

The gravitational force between earth and the spacecraft represents the weight of the satellite. Hence,

w1 : w2 = (r2)² : (r1)²

8200 : w2 = 49600² : 6400²

w2 = 136.5 N

Learn more about gravitational force here:

https://brainly.com/question/25938309

#SPJ4

HELPPPP ASPPP PLEASE THA K YOU

Answers

In the transverse wave, point D represents the trough of the wave.

option D.

What is the trough of a wave?

A wave two important points point, one curves upwards while the other curves downwards.

The maximum value of upward displacement within a cycle of a wave is known as crest. So the crest is a point on a surface wave where the displacement of the medium is at a maximum.

The maximum value of downward displacement within a cycle of a wave is known as trough.

Thus, from the graph, point A represents crest of the wave while point D represents trough of the wave.

Learn more about trough here: https://brainly.com/question/2116559

#SPJ1

the andromeda galaxy is the closest spiral galaxy a little more than 2 million light-years away. the light we see today from the andromeda galaxy was emitted how long ago?

Answers

We observe the Andromeda galaxy as it was 2.5 million years ago since it is around 2.5 million light years away.

We observe the Andromeda galaxy as it was 2.5 million years ago since it is around 2.5 million light years away. The Andromeda galaxy's light was first visible 2.5 million years ago. The Andromeda galaxy may have gotten a few thousand light years nearer to us during those 2.5 million years. While the diameter of the Andromeda galaxy itself is roughly 200 thousand light years, the uncertainty in the 2.5 million light year distance estimate is on the order of 100 thousand light years (simply because estimating the distance to other galaxies is difficult).

Learn more about Andromeda Galaxy

brainly.com/question/1499364

#SPJ4

How is the electrostatic force (Felect) related to the separation distance (d) the two charges? Keeping the magnitude of charge on both objects constant, conduct a systematic study to collect data relating separation distance to force. The separation distance is defined as the distance between the centers of the two objects; the best strategy involves centering the objects on a gridline and using distances that are a whole number of squares.


Make a claim describing the relationship between Felect and d. Support your claim with evidence (references to the data) and reasoning

Answers

Allow two positive charges. Cuban and American two were distantly separated B. Cubans also use force against one another. This is also cute. Thus, the force will be equal to Q1 + Q2 + R^2.

More on electrostatic force and two charges :

A characteristic of matter that affects how much force an object experiences when exposed to an electromagnetic field. A substance's charge might be positive, negative, or neutral. Total electric charge is conserved and cannot be created or destroyed, much as energy and matter.

Coulomb's constant, often known as the electric force constant, has a value of

K=   [tex]\begin{equation*} 9\times10^9 \end{equation*}[/tex]  [tex]\begin{equation*} \frac{Nm^2}{C^2} \end{equation*}[/tex]

Electrostatic force formula

[tex]\begin{equation*} \left|F_{E} \right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]      

[tex]F_{E}[/tex] is a electric force [tex]q_{1}[/tex]  and [tex]q_{2}[/tex] is electric charge in coulomb K is constant,  r  is the distance between the charges  

The magnitude of the electric force between [tex]q_{1}[/tex] and [tex]q_{2}[/tex]

Directly proportional to the size of the charges and inversely proportional to the square of the distance between them is the formula q, start subscript, 2, end subscript. The name of this equation is Coulomb's Law.

Comparing electric force and gravitational force with Newton's law of gravitation:

[tex]\begin{equation*} \left|F_E\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

[tex]\begin{equation*} \left|F_G\right|=K\left|\frac{q_1q_2}{r^2}\right| \end{equation*}[/tex]

Similar to how gravitational force grows in strength with mass, electric force grows in strength with the size of the charges. Along the fictitious line connecting the items, both forces operate. The inverse-square law states that both forces are inversely proportional to the square of the distance between the objects. Additionally, both forces have constants of proportionality.

The relative intensities of gravitational and electric forces, which are determined by the ratio of K to G, are a disparity between them. The gravitational force between an electron and a proton is much smaller than the electrostatic force between them by several orders of magnitude.

To know more about gravitational force :

https://brainly.com/question/24783651

#SPJ4

Please help me! I will give brainliest! :(

1. Imagine 50 people walking in straight lines in a room. What would happen to the number of
collisions they would have with the walls if they moved to a room half the size of the original
room but walked at the same speed?

2. Imagine 50 people walking in straight lines in a room. If those 50 people start running, what needs to happen in order for the number of collisions they would have with the walls of the room to remain the same?

Please answer #’s 1 and 2

Answers

1) They would collide with the walls more frequently

2) They would collide with the walked more frequently

What is the collision?

We know that collisions occur when there is a bump of an object against an obstacle. In the case of the scenario that we have here, we have been told that there are 50 people walking in straight lines in a room. If we move the walls to half the size they would collide with the walls more frequently.

In the second case, if the people that were walking in a straight line now begin to run, the chances are that they would collide with the walls more frequently.

Learn more about collision :https://brainly.com/question/13138178

#SPJ1

a student does an experiment to measure the charge on various drops of oil and collects the data shown. how do the data relate to the claim that the elementary charge has a value of 1.6

Answers

The information supports the assertion that the elementary charge has a value of 1.6. All of the values are more than that number, proving the assertion.

Is my phone capable of measuring?

Utilizing augmented reality (AR) technology, the Measure app transforms your iPhone into a tape measure. Objects' sizes can be estimated, the measurements of rectangular objects can be automatically determined, and a photo of the measurement can be saved.

An easy measure is what?

Simple measurements are those that just employ one kind of unit. hours and minutes To find all three numbers in seconds, we must use the conversion factors, for instance, if we wish to convert 2 hours, 23 minutes, and 12 seconds into seconds.

To know more about Measure visit:

https://brainly.com/question/4725561

#SPJ4

A 5. 60 kg bucket of water is accelerated upward by a cord of negligible mass whose breaking strength is 75 N. If the bucket starts from rest, what is the minimum time requiared to raise the bucket a vertical distance of 12 m without breaking the cord

Answers

The minimum time required to raise the bucket a vertical distance of 12m without breaking the cord is 2.58s

Given the mass of bucket of water (m) = 5.60kg

The strength acting on bucket is (F) = 75N

The distance bucket is raised (s) = 12m

Let the time taken to raise the bucket = t

So, W = m x g as a force of gravity is always acting on a system.

W = 5.60 x 9.8 such that W = 54.88N

The maximum accelerating force acting on the cord (Fr) = 75 - 54.88 = 20.12N

We know that from Newtons laws of motion F = ma where a is the acceleration and F is the force.

Fr = ma then a = 20.12/5.60 = 3.59m/s^2

Then according to the problem s = ut + 1/2at^2 where u is initial velocity which is 0m/s as at rest initially.

So, s = 1/2at^2 then 12 = 1/2 x 3.59 x t^2

t^2 = 24/3.59  = 6.68

t = 2.58s

Hence the minimum time required to raise the bucket a vertical distance of 12 m without breaking the cord is 2.58seconds.

To learn more about acceleration click here https://brainly.com/question/12550364

#SPJ4

-A 180 kg hippo is riding a bicycle at a speed of 6. 0

m/s. Out of nowhere, a chimpanzee runs out in the

hippo's path and he must slam on his brakes. If the

bicycle's brakes exert a force of 1600 N, how

long will it take to stop the bicycle? _s

Answers

A 180 kg hippo is riding a bicycle at a speed of 6. 0 m/s. 0.135 sec will it take to stop the bicycle

Calculating:

The kinetic energy of an object can be calculated using the equation:

KE = (1/2) × m × v^2

where m is the mass of the object, v is its velocity.

The work done by the brakes is given by the force of the brakes multiplied by the distance over which the brakes are applied. This can be written as:

W = F × d

As the force of the brakes is equal to the force that opposes the motion of the object and the force is constant, then,

F × d = KE

W = (1/2) × m × v^2

d = (2 × KE) / F

where d is the distance over which the brakes are applied, F is the force of the brakes and m, v are the mass and velocity of the object

Now we can substitute the known values into this equation:

d = (2 × (1/2) × 180 kg × (6 m/s)^2) / 1600 N = 0.81 m

Now we can find the time it takes to stop the bicycle:

t = d / v = 0.81 m / 6 m/s = 0.135 s

So it will take the hippo 0.135 seconds to stop the bicycle using the brakes.

How does kinetic energy work?

The energy that an object has when it moves is called kinetic energy. It is equivalent to the amount of work required to propel an object from rest to its current velocity. The following equation can be used to determine an object's kinetic energy:

where v is the object's speed and m is its mass. The joule (J) is the unit of kinetic energy.

To know more about kinetic energy :

brainly.com/question/26472013

#SPJ4

why is no harm done? why is no harm done? because very little charge is transferred between you and the doorknob. because there is very large voltage between you and the doorknob. because very large charge is transferred between you and the doorknob. because there is very little voltage between you and the doorknob. request answer

Answers

There's no harm done because this is really the low current there is and not many electrons transferred between you and the doorknob.

Voltage just says what is the tendency for charges to move. But it's actually the current that does harm to the body, which is the number of charges per second that move.

Electric field is the voltage or the potential difference between two points divided by the distance between them. We can solve this for V by multiplying both sides by d. So V is electric field times distance. We have electric field of about 3 times 10 to the six volts per meter when air starts to have dielectric breakdown and starts conducting and you have a spark. That's times by the separation between your finger and the doorknob which is one millimeter, which is one times 10 to the minus three meters. So the voltage must be about 3,000 volts.And in this case, there is not very many charges, and so no harm done.

Learn more about current here :

https://brainly.com/question/13076734

#SPJ4

A 15. 0-cm-long solenoid with radius 0. 750 cm is closely wound with 600 turns of wire. The current in the windings is 8. 00 A. Compute the magnetic field at a point near the center of the solenoid

Answers

The windings' current is 8.00 A. A location close to the solenoid's center has a magnetic field of 0.0111 T.

The magnetic field at a point near the center of a solenoid can be calculated using the following formula:

B = (μ₀xnxI) / L

Where:

B is the magnetic field

μ₀ is the permeability of free space, which is 4π x 10^(-7) Tm/A

n is the number of turns per unit length of the solenoid, in turns/m

I is the current flowing through the solenoid, in A

L, length of solenoid

Given the radius of the solenoid as 0.75 cm = 0.0075 m, and the length of the solenoid as 15.0 cm = 0.15 m, the cross-sectional area of the solenoid is:

π*(0.0075 m)² = 1.767 x 10^-5 m²

The number of turns per unit length of the solenoid can be calculated by dividing the total number of turns by the length of the solenoid:

600 turns / 0.15 m = 4000 turns/m

We can now substitute these values into the formula:

B = (4π x 10^(-7) Tm/A) * (4000 turns/m) * (8.00 A) / (0.15 m)

B = 0.0111 T

Therefore, the magnetic field at a point near the center of the solenoid is 0.0111 T.

It is worth noting that this result is valid only when the solenoid is long enough so that its ends do not affect the magnetic field inside. Also, the solenoid is considered as tightly wound and the radius of the solenoid much smaller than the length, so that the magnetic field inside the solenoid is uniform.

To know more about magnetic field please refer: https://brainly.com/question/23096032

#SPJ4

a pendulum has a period of 1.04 seconds on earth. what is its period on mars, where the acceleration of gravity is about 0.37 that on earth? give the answer in seconds, to 2 decimal places.

Answers

Period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

What is period of a pendulum?

Period of any pendulum is the distance from the pivot to center of oscillation.

The period of a pendulum, T:

T = 2 * pi * sqrt(L/g);  L is length of pendulum and g is acceleration due to gravity.

On Earth, period of the pendulum is 1.04 seconds. To find the period on Mars, we can use fact that the acceleration due to gravity is 0.37 times that on Earth:

g_mars = 0.37 * g_earth

T_mars = 2 * pi * sqrt(L/g_mars)

Now we know ; T_mars = T_earth * sqrt(g_earth/g_mars)

T_mars = 1.04 * sqrt(1/0.37) = 1.04 * 1.76 = 1.8368 s

Therefore, the period of the pendulum on Mars is 1.84 seconds (rounded to 2 decimal places).

To know more about period of pendulum, refer

https://brainly.com/question/26524032

#SPJ4

a 1kg rock suspended above water weighs 9.8n when suspended beneath the surface it weighs 7.8 n what is th buoyant force

Answers

The buoyant force exerted on the 1 kg rock by the water is 2 N.

The buoyant force is the force exerted by a fluid (in this case, water) on an object that is submerged in it. To find the buoyant force, we need to subtract the weight of the object when it is submerged in the fluid from the weight of the object when it is suspended above the fluid.

The weight of the rock when it is suspended above water is 9.8 N (the weight of the rock is equal to its mass multiplied by the acceleration due to gravity, which is 9.8 m/s²).

The weight of the rock when it is suspended beneath the surface of the water is 7.8 N.

To find the buoyant force, we can use the following formula:

Buoyant force = weight of object above fluid - weight of object below fluid

Buoyant force = 9.8 N - 7.8 N = 2 N

Therefore, the buoyant force exerted on the 1 kg rock by the water is 2 N.

Learn more about Buoyant Force here: https://brainly.com/question/21990136

#SPJ4

Other Questions
Please help me!! What is the reference for these 2 references? (7th edition APA format). And the in-text citation of each too!! Thank you!!1. A.K. Elsayed, J.M.C. Smith, and E.T. Rupp's study, "Exploring the use of social media for professional networking: A study of LinkedIn use among business students. 2016's Vol. 46(11), pp. 636650 of the Journal of Applied Social Psychology.2. J.G. Gao and J. Wang's "The Impact of Professional Networking Sites on Job Search and Career Advancement. 2016's Vol. 57(2), pp. 112, in the Journal of Computer Information Systems Find the volume of methane measured at 298 K and 1.64 atm required to convert 0.510 L of water at 298 K to water vapor at 373 K . What does instructional communication involve? en quoi Le Malade imaginaire est une tragi comdie why is it more effective to perform an extraction with several small portions of solvent as opposed to one large portion of solvent of equal volume? byu what is the distinguishing feature of a synovial joint? What do these two changes have in common? melting glass, a puddle freezing into ice on a cold night. Select all that apply. Both are caused by cooling. Both are changes of state. Both result in a different type of matter than was there before. Both are chemical changes. put the four evolutionary stages in the correct historical order, with the oldest on the top and the newest on the bottom. instructions choice 1 of 4. production era toggle button production era choice 2 of 4. sales era toggle button sales era choice 3 of 4. marketing concept era toggle button marketing concept era choice 4 of 4. market orientation toggle button market orientation Harper and Joe want to buy season passes for Disneyland but neither of them has the $1,300 needed to purchase a pass. Harper decides to get a job that pays $25 a week. She has nothing saved right now. Joe already has $80 and plans to save $15 of her weekly allowance.a) When will they have the same amount of money saved up? How much money will they both have?b) How long will it take each of them to save up for the season pass? (Simple)......Classify the transformation pls A diet is being prepared for WTAMU dorms. The varied diet is to be made of three foods: A, B and C. Food A costs $2.25 per pound and contains 500 calories. Food B costs $ 2 per pound and contains 700 calories. Food C costs $ 3 per pound and contains 600 calories No more than 0.75 pounds of food C can be used per resident. No less than 2 pounds of food B should be used per resident. The objective is to feed the students at the least cost, but the diet must have at least 1800 calories.If we define the decision variables as A: pounds of food A, B: pounds of food B, and C pounds of food C, the object function is to minimize Blank 1. In addition to non-negative constraints, other constraints are Blank 2,Blank 3, and Blank 4.(1. No need to use multiplication sign. For example, just write 10A not 10*A. For greater(less) than sign, just write it as >= ( the doctrine of laissez faire is based on the belief that multiple choice markets result in an unfair distribution of income. markets are likely to do a better job of allocating resources than government directives. government directives are likely to do a better job of allocating resources than markets. government failure does not exist. how did the manga carts inspire later documents? the nurse knows that patient education has been effective when the patient makes which statement about the difference between a tocodynamometer and an intrauterine pressure catheter (iupc)? juanita is outlining the tasks required for the jobs in her department as well as defining how the work is to be performed. she is completing a(n) . Gutenbergs Impact on Europe In this task, youll answer a series of short questions about two images. Then youll analyze some immediate effects of the introduction of the Gutenberg printing press in Europe. Your answers should be in full sentences. which would lead to consumers having more goods and services, or better goods and services (or a better standard of living)? should you give any discount to people who order two dozen cookies? if every customer orders 2 dozen, will your capacity increase? if yes, you may want to offer discount to encourage customers to order 2 dozen. you may assume the company operates 24/7 here. Which trait best describes to do or achieve something How does comparison shopping make you a smart consumer?