Answer:
The first one (Work = 160,000 Nm, Power = 160, 000 Nm/sec)
Explanation:
hope this helps :)
A force of 1000 pounds drags a truck 50 feet in 10 seconds. then the work accomplished is 50000 lbs feet and the power required was 5000ft-lbs/sec.
What is Force ?Force is responsible for the motion of an object. it produces acceleration in the body. According to newton's second law force is mass times acceleration i.e. F =ma. Its SI unit is N which is equivalent to kg.m/s². There are two types of forces, balanced force and unbalanced force. Balanced forces are those forces which are opposite in direction and equal in magnitude. When Net force acting on a body is zero then we call it as balanced force. Balanced force is not responsible for the motion of the body. ex. when two persons pulling rope on both end with equal magnitude which cause them to be balanced force have 0 net force. Unbalanced forces are those when resultant of all the forces is not equal to zero is called as unbalanced force. unbalanced force is responsible for the motion of the body.
Given,
F = 1000 pound
s = 50 feet
t = 10 s
Work = F.s = 1000 * 50 = 50000 lbs feet
Power = Work/time = 50000/10 = 5000ft-lbs/sec
Hence option A is correct.
To know more about Force :
https://brainly.com/question/30507236
#SPJ2.
What purpose would the sand serve?
FIRST ONE TO ANSWER CORRECTLY GETS BRAINLIEST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
Sand can also refer to a textural class of soil or soil type; i.e., a soil containing more than 85 percent sand-sized particles by mass.
Explanation:
Interesting fact...
Why are there differences between the cooling rates of sand and water? Sand cools off faster than water because sand is a solid. Water heats up slower and cools off slower than sand. Sand heats up faster and cools off faster than water.
As a variable and to count as land. As if you were at a beach, this sand would count as the sand that the sun would be beaming on. ^^
-Answer
HELP NEEDED
What would be an example of something being brittle? *
a fishing pole
a bowling ball
a cupcake
an airplane
Answer:
Explanation:
A fishing pole maybe?
Answer:
A aieplane
Explanation:
Because brittle means hard but liable to break or shatter easily.
Which is a valid velocity reading for an object?
A.45 m/s
B. 45 m/s north
C. 0 m/s south
D. 0 m/s
The valid option would be 45 m/s north. This option specifies a velocity of 45 meters per second in the north direction. It includes both the magnitude (45 m/s) and the direction (north) of the velocity. Hence the correct option is (A).
A. 45 m/s: This indicates a velocity of 45 meters per second without specifying the direction. It represents the magnitude of the velocity but does not indicate a particular direction.
B. 45 m/s north: This indicates a velocity of 45 meters per second in the north direction. It specifies both the magnitude (45 m/s) and the direction (north).
C. 0 m/s south: This indicates a velocity of 0 meters per second in the south direction. No velocity. It specifies both the magnitude (0 m/s) and the direction (south).
D. 0 m/s: This indicates a velocity of 0 meters per second, meaning the object is not moving. It represents zero speed and zero direction.
The correct option is (A).
To know more about velocity:
https://brainly.com/question/34025828
#SPJ6
What forces hold the planets and the moon together?
Answer:
Gravity
Explanation:
Because there this is lot of mass there is a force pulling mass to it, that is gravity.
write a motivational speech to someone who wants to become a scientist please write this as it is for kids :) PLEASEE HELP!!!!
Answer:
A motivational speech for a to be scientist. Crazy experiments and more you have the right to be whatever you adore. Your young yet strong everything will come along. I believe in you and so should you since your becoming a scientist you’ll acquire it soon. You’ll discover new things and sight to see when you become a scientist make sure to call me. :)
Explanation:
Hope it’s good I made up a couple words that rhyme good luck!
In the word "hydroelectricity," which of the following does the prefix "hydro-" relate to? Choose the best answer.
We didn't get any answer options but here's my answer anyways...
Hydro power is electrical energy produced through the power of moving water. Power obtained from the (typically gravitational) movement of water., Hydropower plants derive energy from the force of moving water and harness this energy for useful purposes...
Hope is helped!
What is true about the force acting on the cars at the end of a roller coaster ride as they slow down right before stopping?
The cars will slow down as a result of unbalanced forces and negative acceleration.
What is Inertia?Inertia is the ability of an object to continue its current motion until and unless some external force causes its speed or direction to change. Inertia is described in the Newton's first law of Motion.
The cars are slowed due to negative acceleration of the object eventually to a stop, because of these unbalanced forces due to friction which are acting on them. The riders, which have inertia, are also acted on by the unbalanced forces throughout the ride causing them to change their state of motion.
Learn more about Inertia here:
https://brainly.com/question/3268780
#SPJ6
12 POINTS PLUS MARKF BRAINILEST
Answer:
gas
Explanation:
the spreading out of waves after passing through a small opening. What is the word to this definition? HELP!!
Answer:diffraction
Explanation:
Answer:
Refelction
Explanation:
look it up that is what it says
5.0 start thanks and plx do brainly
The sleigh is being pulled with a force of 800N and has a mass of 200 Kg.
What is the acceleration in m/s/s?
Answer:
a = 4m/s²
Explanation:
Given:
F = 800N
m = 200 kg
Unknown:
acceleration or a
Formula and solution:
a = F/m
a = 800 kg.m/s² ÷ 200 kg
Final Answer:
a = 4 m/s²
in the solution there's a two same unit and that is kg so the same unit will be cancelled and the rest is going to aapply in the answer that is 4 so if combine it the final answer is 4 m/s²
What question can you ask yourself if you are trying to determine if a mixture is heterogeneous or homogeneous? (This is not in the reading, so you will have to come up with your own question to tell the difference.)
Answer:
did it have more than one phase
Explanation:
this will be my question
When a physical or chemical change occurs, the law of conservation of mass always applies. What happens to the atoms during a chemical change, according to this law?
Group of answer choices
Atoms disappear
Atoms are created.
Atoms are destroyed.
Atoms are rearranged.
Can someone tell me the answer to this?
Answer:
A
Explanation:
Answer:
A
Explanation:
can u plzz help meee
Amy weighs 35 kg and her dad weighs 85 kg. They are roller skating. Amy challenges her dad to race. They stand poised at the starting line. Her dad yells, “Go!” Who will go faster and why?
Answer:
Amy because she was less than her dad and due to the dads weight being more it'll add friction to the skates which will slow him down.
Explanation:
Answer:
Amy will win because she ways less than her dad.
Explanation:
Help please! i dont understand
Energy Transfer and Temperature Quick Check
4 of 4Items
Item 4
Use the table to answer the question.
Sample Temperature (ºC)
L 40
M 88
N 21
The table shows the temperature of three water samples. Which list shows the samples in order from greatest to least average kinetic energy of the water molecules?
(1 point)
L, M, N
N, L, M
M, L, N
N, M, L
Which cube has the highest density?
Answer:
I am a beginner so I dont know! I think that it is 3
1
Record temperature of water.
Put ice in water.
Record temperature after ice melts.
2
Put ice in water.
Touch water to determine if it feels colder after ice melts.
3
Measure the mass of the water.
Put ice in water.
Measure the mass of water as ice cubes melt.
4
Determine temperature and mass of water.
Put ice in water.
Record the time for ice to melt.
A student lists some possible ways to investigate the transfer of kinetic energy using ice in a sample of water. Which procedure would be best to investigate the transfer of kinetic energy?
(1 point)
3
1
2
4
A student lists some possible ways to investigate the transfer of kinetic energy using ice in a sample of water. The procedure would be best to investigate the transfer of kinetic energy is Determine temperature and mass of water. Put ice in water. Record the time for ice to melt. Therefore, option 4 is correct.
What do you mean by kinetic energy ?The term kinetic energy is define as the energy of motion, observable as the movement of an object. The formula of kinetic energy is as follows:
Kinetic energy = 1/2 mv²
Kinetic energy exists in every moving object and particle. Kinetic energy is demonstrated by a person walking, a soaring baseball, a crumb falling from a table, and a charged particle in an electric field.
Kinetic energy is the energy held by a moving object. Kinetic energy exists in the earth's rotation around the sun, you walking down the street, and molecules moving in space.
Thus, option 4 is correct.
To learn more about the kinetic energy, follow the link;
https://brainly.com/question/15764612
#SPJ2
The equation shows a chemical reaction using 64 grams of calcium, 162 grams of zinc carbonate, and 152 grams of calcium carbonate.
calcium + zinc carbonate → calcium carbonate + zinc
According to the law of conservation of matter, how much zinc is present in the product?
Group of answer choices
74 grams
98 grams
88 grams
64 grams
X-Rays can reveal an objects temperature since temperature determines the wavelength of its radiation. The ________ the object, the _________ the wavelength is.
PLEASE HELP!
Answer: I think the answer is "hotter" the "bigger"
Explanation:
X-Rays can reveal an objects temperature since temperature determines the wavelength of its radiation. The HOTTER the object, the BIGGER the wavelength is because if tempeture determines wavelength then the hotter it is the bigger the wavelength would be and vice versa. Hopefully that helped. im not 100% sure.
examples of positive effects of fluid forces
Answer:
fluid dynamic forcesln physics fluid mechanics