a gas has a mass of 3175 g and takes up enough space to fill a room that is 2.00 m x 2.00 m x 5.00 m determined what the gas is in g/mL

Proton b's chemical shift, which will have the biggest leaning impact on both protons' impulses, is 10–14 Hz.

The leaning effect is determined by the magnitude of the coupling constant between protons a and b. The coupling constant is determined by the separation between the proton signals and the number of intervening bonds between them.

Protons that are separated by three bonds (i.e., are geminal) and have a coupling constant of 10-14 Hz produce the largest leaning effect In nuclear magnetic resonance (NMR), the largest leaning effect is caused by the geminal protons coupling, with a coupling constant of 10-14 Hz.

When the coupling constant between protons is greater, the peak splitting on the NMR spectrum increases. The chemical shift for proton b that will give the largest leaning effect for the signals of both protons is 10-14 Hz.

The two protons are geminal, which means they are separated by three bonds. Hence, the coupling constant of 10-14 Hz produces the largest leaning effect.

Learn more about  nuclear magnetic resonance  here:

https://brainly.com/question/30429613

#SPJ11

When the temperature of a reaction is lowered during the decomposition reaction of calcium carbonate to calcium oxide and carbon dioxide, the equilibrium will shift towards the reactants.

Exothermic reactions release heat energy into the surroundings, which means that the temperature of the reaction is lowered when it is proceeding from reactants to products. So, when the temperature is reduced, the system will try to increase the temperature by shifting the equilibrium towards the endothermic side, which means towards the reactants side.

Here, we know that decomposing heated calcium carbonate into calcium oxide, and carbon dioxide is an endothermic reaction because it requires heat. As a result, the equilibrium will shift towards the left (reactants side) to compensate for the decrease in temperature. This will increase the concentration of reactants and decrease the concentration of products, ultimately, it will cause the equilibrium to shift in the direction of reactants.

#SPJ11

Learn more about equilibrium reactions: In which reaction at equilibrium will the point of equilibrium shift to the right? https://brainly.com/question/27404032

With added heated calcium carbonate decomposes to form calcium oxide and carbon dioxide, the equilibrium will shift towards the reactant side if the temperature of the reaction is lowered.

According to Le Chatelier's principle, if any change is applied to a system at equilibrium, the system reacts in such a way as to counteract that change.

The principle explains that an increase in temperature causes equilibrium to shift in the endothermic direction, while a decrease in temperature causes it to shift in the exothermic direction.

When [tex]CaCO_3[/tex] is heated, it decomposes to form CaO and [tex]CO_2[/tex].

The balanced chemical equation is:

[tex]CaCO_3 (s)\rightarrow CaO (s) + CO_2 (g)[/tex]

The given reaction is an endothermic reaction as it absorbs heat.

Therefore, when the temperature increases, the equilibrium shifts towards the product side to counteract the change. On the other hand, when the temperature is decreased, the equilibrium shifts towards the reactant side to counteract the change.

In this case, the equilibrium will shift in the backward direction to produce more [tex]CaCO_3[/tex].

To learn more about Le Chatelier's principle refer: https://brainly.com/question/30533097

#SPJ11

Answer:

So the correct answer is option (C) 7.2 moles.

Explanation:

According to the balanced chemical equation for the combustion of C2H6:

C2H6 + O2 → CO2 + H2O

The stoichiometric coefficients tell us that 1 mole of C2H6 reacts with 3 moles of O2 to produce 2 moles of CO2.

To determine how many moles of CO2 are produced from 3.6 moles of C2H6, we need to use stoichiometry. We can set up a proportion using the stoichiometric coefficients from the balanced equation:

3.6 mol C2H6 / 1 x 2 mol CO2 / 1 mol C2H6 = 7.2 mol CO2

Therefore, 7.2 moles of CO2 are produced during the complete combustion of 3.6 moles of C2H6.

So the correct answer is option (C) 7.2 moles.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

According to this question, a reaction occured between ammonia gas and oxygen gas to produce nitrogen gas and water.

Based on the equation, 4 moles of ammonia requires 3 moles of oxygen gas to react.

This means that 3.53 moles of ammonia will require 3.53 × ¾ = 2.65 moles of oxygen gas.

Learn more about balanced equation at: https://brainly.com/question/7181548

#SPJ1

The properties of metals and nonmetals are different, and these differences can be used to differentiate between them. Here are some characteristics that can be used to identify whether a particle is a metal or a nonmetal:

Physical appearance: Generally, metals are shiny, lustrous, and have a metallic luster. Nonmetals, on the other hand, are typically dull, lack luster, and are not shiny.

Conductivity: Metals are good conductors of heat and electricity, while nonmetals are poor conductors.

Malleability and ductility: Metals are generally malleable and ductile, meaning they can be easily shaped or drawn into wires. Nonmetals, however, are brittle and not malleable or ductile.

Chemical properties: Metals tend to form positive ions, while nonmetals tend to form negative ions.

By examining these properties, it is possible to differentiate between metals and nonmetals.

To learn more about Malleability refer to:

brainly.com/question/1349130

#SPJ4

Two main types of elements with different characteristics are metals and nonmetals. By looking at a particle's physical and chemical characteristics, one may tell if it is a metal or nonmetal.

The following characteristics of metals and nonmetals can be used to distinguish them: Physical Characteristics Nonmetals are drab and lack a metallic shine, whereas metals are often brilliant and have one. Metals can usually be easily formed into various shapes because they are malleable and ductile. Nonmetals have a tendency to break readily and are fragile. Nonmetals are weak conductors of heat and electricity compared to metals. Except for mercury, metals are typically solid at room temperature. At room temperature, nonmetals might be solid, liquid, or gas.

learn more about metals  here:

https://brainly.com/question/29404080

#SPJ4

in H2C=CCl2: σ bonds = 3, π bonds = 1, in HOOC−COOH: π bonds = 0, σ bonds = 14, FHC=C=CHF: σ bonds= 7, π bonds = 2.

H2C=CCl2:

Number of σ bonds: 3 (2 C-H bonds and 1 C-Cl bond)

Number of π bonds: 1 (C=C double bond)

HOOC−COOH:

Number of σ bonds: 14 (8 C-H bonds, 4 C-O bonds, and 2 O-H bonds)

Number of π bonds: 0

FHC=C=CHF:

Number of σ bonds: 7 (4 C-H bonds, 2 C-F bonds, and 1 C-C bond)

Number of π bonds: 2 (2 C=C double bonds in the carbon ring)

In the molecule H2C=CCl2, there are three sigma bonds and one pi bond. The sigma bonds are formed due to the overlap of orbitals between the carbon atoms and hydrogen and chlorine atoms. The pi bond is formed by the sideways overlap of unhybridized p orbitals on the two carbon atoms in the double bond.

In the molecule HOOC−COOH, there are 14 sigma bonds and no pi bonds. The sigma bonds are formed due to the overlap of orbitals between the carbon, hydrogen, and oxygen atoms. This molecule is an example of a carboxylic acid, and the two carboxyl functional groups are connected by a carbon-carbon single bond.

learn more about Sigma bond here:

https://brainly.com/question/30000552

#SPJ4

When put in an electric and magnetic field, a subatomic particle's electric charge causes it to feel force.

When put in an electromagnetic field, matter experiences a force due to its physical characteristic known as electric charge. You can have a positive or negative electric charge (commonly carried by protons and electrons respectively, by convention).

Unlike charges draw one another while like charges resist one another. Neutral refers to an item that carries no net energy. Classical electrodynamics, the name given to early understanding of how charged particles interact, is still correct for issues that do not call for taking into account quantum effects.

Learn more about electric charge

https://brainly.com/question/9194793

#SPJ1

Kp for the reaction [tex]N2(g) + 3H(g) + 2NH_3(g)[/tex] is 3.13 x 10⁻³

The gas ammonia (NH₃) is colourless and has a strong odour. Its molecular weight is 17.03 g/mol and it is composed of one nitrogen and three hydrogen atoms.

A balanced response is: [tex]3H2 + N2(g) = 2NH3 (g)[/tex]

The partial pressure of N₂ is x/4, the partial pressure of H₂ is 3x/4, the partial pressure of NH₃ is 0.6x, and the partial pressure of NO₂ is 0.226x. The total pressure is the sum of these partial pressures:

[tex]x/4 + 3x/4 + 0.6x + 0.226x = 50[/tex]

When we solve for x, we get x = 35.96 atm. Hence, we may calculate partial pressures:

PN₂ = 35.96/4 atm= 8.99 atm

PH₂ = 3(35.96)/4 atm= 26.98 atm

PNH₃ = 0.6(35.96) atm= 21.58 atm

PNO₂=0.226(35.96) atm= 8.12696 atm

Finally, we can calculate Kp using partial pressures:

Kp is equal to (PNH₃)₂ / (PN₂)(PH₂)₃ Kp is equal to (21.58)₂ / (8.99)(26.98)3 Kp is equal to 3.13 x 10⁻³

Hence, the Kp for the reaction [tex]N2(g) + 3H(g) 2NH_{3} (g)[/tex] is 3.13 x 10⁻³

Learn more about NH₃ here:

https://brainly.com/question/29063662

#SPJ4

Temperature and thermal energy are intrinsic properties that do not depend on the amount of substance you have. Both of these properties depend only on the state of the system and the conditions it is subjected to.

Let's understand this in detail:

1. Temperature measures the average kinetic energy of particles in a system. The temperature of a substance is determined by measuring how much energy is required to raise its temperature by a certain amount.

2. Thermal energy is the total energy of the particles in a system, including both kinetic and potential energy. The amount of thermal energy a substance has depends on the temperature and the number of particles in the system. It is an extrinsic property of a system that depends on the amount of substance present. However, it's worth noting that thermal energy can also be expressed on a per-molecule or per-atom basis as internal energy, which is an intrinsic property. Internal energy is the total energy stored in the particles of a system and is independent of the amount of substance present.

Learn more about intrinsic properties: Would extrinsic or intrinsic properties be more useful in identifying a substance? Why? https://brainly.com/question/28528346

#SPJ11

Option (B) is correct. Barium sulfate is insoluble in water and form a precipitate when 3M HCL and 0.1 BaCL2 are added.

In the solution we will be having, H+, Cl-, Ba2+, Na+ and SO42- ions.

HCL ----------> H+ + Cl-.

BaCl2 -------> Ba2+ + 2Cl-.

Na2SO4 -----> 2Na+ + SO42-.

The ions react each other and we get,

Ba2+ + SO42- ---------> BaSO4. Barium sulfate is known as the inorganic compound. This is a white crystalline solid which is odorless and insoluble in water. Barium sulfate occurs as the mineral barite which is the main commercial source of barium and materials prepared from it. It is insoluble in water it would form a precipitate.

Precipitation is defined as the process of transforming a dissolved substance into an insoluble solid from a super-saturated solution. The solid formed is called the precipitate in an aqueous solution.

To learn more about Barium sulfate

https://brainly.com/question/30902747

#SPJ4

The complete question is,

When 3 M HCL and 0. 1 m BaCl2 are added to a solution of Na2 SO4,

A. no precipitate will form because BaSO4 is soluble in water

B. a precipitate will form because BaSO4 is insoluble in water

C. a precipitate will form because Na2SO4 is soluble in water

D. no precipitate will form because Na2SO4 is insoluble in water

An animal's internal stimulus to feed in order to get the food needed for survival is called hunger.

Hunger is a natural drive that motivates animals to search for and consume food in order to meet their nutritional needs and maintain their health and well-being.

This internal stimulus is regulated by the hypothalamus, a region of the brain that controls a variety of bodily functions, including hunger and satiety. When an animal's energy levels drop or its stomach is empty, the hypothalamus sends signals to the rest of the body to increase the desire for food.

Once the animal has eaten enough to satisfy its nutritional needs, the hypothalamus sends signals to decrease the desire for food and the animal stops eating. This process helps to ensure that animals get the nutrients they need to survive and maintain their health.

For more question on internal stimulus click on

https://brainly.com/question/14126630

#SPJ11

The air is cooled by the currents, which causes it to rise and warm when it crosses land. This warming causes the air to hydrate, then afterward precipitates as the air passes deeper inland.

The impacts of grasslands hitting the sea are typically astounding. Namibia and or the Western Sahara constitute the place where the African desert meets north Mediterranean Sea. Moreover, the Sahara extends eastward to the Red Sea. The Atacama Desert and the Pacific Ocean meet strikingly in northern Chile.

Cold ocean currents that move near the shore drive coastal deserts to emerge. The air is stabilised by the chilly winds, which also prevent cloud development. It produces a significant amount of fog. A dense blanket of minute water droplets which are too light to disperse as rain makes up a fog.

To know more about hydrate visit:

https://brainly.com/question/11202174

#SPJ1

Answer:

Explanation:

On the reactants side, we have:

4 iron

6 oxygen

On the products side, we have:

2 iron

3 oxygen.

This is now pretty easy, as it is clear that the reactants = 2×products

Thus, we need 2Fe₂O₃ to balance the equation

The valence shell of Argon is completely filled, it is chemically stable, and it is not possible for it to gain or lose electrons to form chemical bonds with other Argon atoms.

Reason whether or a bond would be formed between two atoms of argon 18 is :

Two atoms of Argon (Ar) with atomic number 18 have completely filled outermost electron shells with 8 electrons in the valence shell (the highest energy level of electrons). The electronic configuration of Argon is 1s²2s²2p⁶3s²3p⁶, which means that the 3rd energy level (n=3) of Argon has 8 electrons in its valence shell.

Since the valence shell of Argon is completely filled, it is chemically stable, and it is not possible for it to gain or lose electrons to form chemical bonds with other Argon atoms. Therefore, two atoms of Argon cannot form a chemical bond with each other.

No, a bond will not be formed between two atoms of argon (Ar) 18. This is because Ar (18) is a noble gas, which means it has a full outer shell of electrons and does not need to form a bond in order to gain stability.

Hence, it can be concluded that no bond would be formed between two atoms of Argon (Ar).

For more question on electrons click on

https://brainly.com/question/371590

#SPJ11

The diagram represents a nuclear fission reaction where a Uranium-235 nucleus absorbs a neutron, becomes unstable and splits into two fragments releasing energy and neutrons.

Nuclear fission is the process of splitting an atomic nucleus into two or more smaller nuclei with the release of energy, while nuclear fusion is the process of combining two or more atomic nuclei into a larger nucleus with the release of energy.

In a nuclear fission reaction, energy is released due to the conversion of a small amount of mass into a large amount of energy, in accordance with Einstein's famous equation E=mc^2. The release of energy occurs when the Uranium-235 nucleus splits into two fragments, releasing neutrons and gamma radiation in the process.

Learn more about nuclear fission here:

https://brainly.com/question/29141330

#SPJ1

H-H: 432 kJ/mol,C-H: 413 kJ/mol,∆H = -451 kJ/mol.The rection is H-H + C-H => H + H + H- Therefore,this reaction is exothermic since the enthalpy change is negative.

Enthalpy is a thermodynamic property that is a measure of the total energy content. It is the sum of the internal energy and the product of its pressure and volume. It is expressed in units of energy per unit mass, such as joules per kilogram (J/kg) or kilocalories per kilogram (kcal/kg).It is an important factor in the study of thermodynamics.

For reactants, two hydrogen molecules must be broken down into two hydrogen atoms (H-H bond energy = 432 kJ/mol).For products, one molecule of carbon monoxide must be formed from one carbon and oxygen atom (C-O bond energy = 799 kJ/mol). Therefore, the enthalpy change for this reaction is calculated as follows:ΔH = (799 kJ/mol) - (2 x 432 kJ/mol) = -5 kJ/mol.

To learn more about enthalpy

https://brainly.com/question/14047927

#SPJ1

three changes in the possible distributions of six gaseous particles within three interconnected boxes is Change 1 and Change 3 have the particles more concentrated in one box, which creates less disorder and therefore a lower entropy. So, the correct answer is Change 2.

Three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs are :

Change 1: Six particles in one box, zero particles in the other two boxes
Change 2: Two particles in each box
Change 3: Four particles in one box, one particle in each of the other two boxes
The change with a positive δS is Change 2. This is because entropy, represented by δS, is a measure of the disorder or randomness of a system. In Change 2, the particles are more evenly distributed among the three boxes, which creates more disorder and therefore a higher entropy.

For more question on gaseous particles click on

https://brainly.com/question/24719118

#SPJ11

PROBABLE QUESTION WOULD BE

Consider these three changes in the possible distributions of six gaseous particles within three interconnected boxes. Part a which change has a positive δs (CHECK IMAGE)

Answer:

One reaction that can be used to show the difference between a weak acid and a strong acid is the reaction with magnesium. When magnesium is added to hydrochloric acid, a vigorous reaction occurs, releasing hydrogen gas and forming magnesium chloride:

2HCl(aq) + Mg(s) → MgCl2(aq) + H2(g)

In contrast, when magnesium is added to ethanoic acid, a slow reaction occurs, releasing hydrogen gas and forming magnesium ethanoate:

2CH3COOH(aq) + Mg(s) → Mg(CH3COO)2(aq) + H2(g)

The reason for the difference in reaction rate between the two acids is due to their different levels of dissociation in water. Hydrochloric acid is a strong acid and completely dissociates in water, releasing a high concentration of hydrogen ions (H+) in solution. In contrast, ethanoic acid is a weak acid and only partially dissociates in water, releasing a low concentration of hydrogen ions in solution. As a result, the reaction between magnesium and hydrochloric acid is more vigorous because of the high concentration of hydrogen ions in solution, whereas the reaction between magnesium and ethanoic acid is slower due to the lower concentration of hydrogen ions in solution.

Explanation:

Answer:

correct comparative pH, such as, 0-3 (strong) 4-6 (weak) • named reaction, such as, with a reactive metal or a named carbonate • comparative results or observations of the named reaction, such as, faster reaction (strong) or greater volume of gas produced in a given time (strong) 

Explanation:

Explanations of different results • weak acids are only partially ionised in aqueous solution • strong acids are completely ionised in aqueous solution/ greater concentration of H+ ions • aqueous solutions of acids at the same concentration/ powder, same temperature

1.58 107 is the value of Kc for the specified equilibrium. In a chemical equilibrium, Kc is the equilibrium constant expressed in terms of the reactant and product concentrations.

The following relationship must be used to determine Kc from Kp:

[tex]Kc = Kp (RT) n[/tex]

where n is the difference in the number of moles of gas between the reactants and products, T is the temperature in Kelvin, and R is the gas constant.

We can write: for the specified equilibrium.

[tex]Δn = (2+1) - 2 = 1[/tex]

Using the values in the equation as substitutes:

[tex]2.5 × 10^10 = Kc(RT)^1[/tex]

To find Kc, we can rearrange the equation as follows:

[tex]Kc = Kp / (RT) (RT)[/tex]

The temperature must be converted to Kelvin:

[tex]625 K = 352 °C + 273.15 = 625.15 K[/tex]

Using the values in the equation as substitutes:

[tex]Kc = (8.314 J/mol K) / [(625.15 K) (2.5 1010)]Kc = 1.58 × 10^7[/tex]

Hence, 1.58 107 is the value of Kc for the specified equilibrium.

Learn more about "Kc," here:

https://brainly.com/question/29970203

#SPJ4

The RK of methyl orange is 3.5, as it changes color from red to yellow at a pH of 3, and has its most intense color (yellow) at pH 6.

Methyl is an organic compound with a formula of CH3, which is a single carbon atom bonded to three hydrogen atoms. It is a type of hydrocarbon and is the simplest of all alkyl compounds. Methyl is a versatile molecule that can be found in a variety of compounds, including pharmaceuticals, solvents, fragrances, and food additives. It is also used in the production of plastics, rubber, dyes, and other synthetic materials. Additionally, methyl is a key component of natural gas, oil, and coal, and can also be produced from biomass. In the body, methyl is used for a variety of biological processes, such as the metabolism of proteins, carbohydrates, and fats.

To learn more about methyl
https://brainly.com/question/28543544
#SPJ1

Answer:

C2H3O2 (acetate)

Explanation:

61.05 g C x 1 mol C / 12.01 g C = 5.083 mol C

7.65 g H x 1 mol H / 1.01 g H = 7.57 mol H

81.30 g O x 1 mol O / 16.00 g O = 5.081 mol O

Divide by lowest number

5.083 / 5.081 = approx. 1 mol C

7.57 / 5.081 = approx. 1.5 mol H

5.081 / 5.081 = 1 mol O

so ratio of moles in this compound are 1 mol C : 1.5 mol H : 1 mol O

Multiply by 2 to get whole number mol ratios

--> empirical formula is C2H3O2 (acetate)

Answer:

I forgot dude sorry so sorry

Answer:

255 grams of ammonia

Explanation:

To solve this problem, we need to use the balanced chemical equation for the reaction between ammonia and water:

NH3 + H2O → NH4+ + OH-

From this equation, we can see that one molecule of ammonia reacts with one molecule of water to produce one hydroxide ion (OH-) and one ammonium ion (NH4+). Therefore, we need the same number of molecules of ammonia as water to form the products.

So, if we have 9.09X^23 molecules of water, we need the same number of molecules of ammonia:

9.09X^23 molecules of NH3

To calculate the mass of ammonia required, we need to use the molar mass of ammonia, which is approximately 17 g/mol:

1 mol of NH3 = 17 g

To convert the number of molecules of NH3 to grams, we need to use Avogadro's number:

1 mol = 6.022 × 10^23 molecules

Therefore, the mass of ammonia required is:

9.09X^23 molecules of NH3 * (1 mol/6.022 × 10^23 molecules) * 17 g/mol

= 2.55 × 10^2 g or 255 grams (rounded to two significant figures)

So, we need 255 grams of ammonia to form 9.09X^23 molecules of water.

Answer: D.

Explanation: it is an opportunity within the Earth's crust.

1 tonne of carbon dioxide has been dissolved in a sample of ocean water, which has a pH of 5.76.

The first step is to convert the given mass of carbon dioxide (1 ton) to moles. Since 1 ton = 2000 pounds, and 1 pound = 0.45 kilograms, 1 ton = 907.18 kilograms. To convert this to moles, we need to divide by the molar mass of [tex]CO_2[/tex], which is 44.01 g/mol.

Therefore, the number of moles of [tex]CO_2[/tex] in 1 ton is [tex]\frac{ 907.18}{44.01} = 20.59 moles.[/tex]

Next, we need to convert the given volume of ocean water (1.0x10 gallons) to liters. Since 1 gallon = 3.785 liters, the given volume is [tex]3.785*10^{10}[/tex] liters.

Thus, the number of moles of [tex]CO_2[/tex] per liter of ocean water is [tex]\frac{20.59}{3.785*10^{10}}= 5.45*10^{-10} moles/liter[/tex]

Now, we can calculate the pH of the sample.When carbon dioxide and sea water react, the equilibrium constant is ([tex]1.2*10^{-9}[/tex]) along with the acid dissociation constant (Ka.) for [tex]H_2CO[/tex] is ([tex]4.3*10^{-7}[/tex]). The pH of the sample can be calculated using the Henderson-Hasselbalch equation:

[tex]pH = pK_a + log(\frac{[base]}{[acid]})[/tex]

where [base] is the base's concentration ([tex]CO_2[/tex])and [acid] is the acid's concentration.([tex]H_2CO_3[/tex]). Since we already calculated the concentration of [tex]CO_2[/tex], We only have to determine the concentration of [tex]H_2CO_3[/tex],This is equivalent to the amount of [tex]CO_2[/tex] times the equilibrium constant:

[tex][H_2CO_3] = [CO_2] * K\\ = 5.45*10^{-10} moles/liter *1.2*10^{-9}\\ \\ = 6.54*10^{-19} moles/liter[/tex]

Now, we can plug all the values into the Henderson-Hasselbalch equation to calculate the pH:

[tex]pH = -log(4.3*10^{-7}) + log(\frac{5.45*10^{-10}}{6.54*10^{-19}})\\pH= 5.76[/tex]

Therefore, the pH of the sample of ocean water with 1 ton of carbon dioxide dissolved in it is 5.76.

learn more about carbon dioxide Refer:brainly.com/question/22530423

#SPJ1

The molarity of the HCl solution is 1.50 M if 30.0 mL of 0.500 M KOH is required to neutralise 10.0 mL of unknown concentration of HCl.

Knowing the number of moles of solute present in 1 L (103 mL) of solution is known as knowing the molarity. Thus, 0.50 moles of potassium hydroxide are needed for a total neutralisation.

KOH + HCl → KCl + H2O

moles KOH = volume x molarity = 30.0 mL x 0.500 mol/L = 0.0150 mol

HCl molarity is calculated as moles / volume HCl.

We are given the volume of HCl as 10.0 mL, which is equivalent to 0.0100 L.

moles HCl = moles KOH = 0.0150 mol

molarity HCl = moles HCl / volume HCl = 0.0150 mol / 0.0100 L = 1.50 M

To know more about molarity  visit:-

https://brainly.com/question/8732513

#SPJ1

3.65 x [tex]10^{14}[/tex] Hz of electromagnetic radiation is needed to promote an electron in a Bohr hydrogen atom from n = 2 to n = 4.

The following equation can be used to determine the frequency of electromagnetic radiation necessary to advance an electron from one energy level to another:

ΔE = hf

ΔE = -Rh[(1/n2²) - (1/n1²)]

When we solve for E using the value of Rh as a substitute, we obtain:

ΔE = -2.42 x [tex]10^{-19}[/tex] J

The following results are obtained when we enter the value of E and Planck's constant into the equation for frequency:

3.65 x [tex]10^{14}[/tex] Hz for f = E/h = (-2.42 x [tex]10^{-19}[/tex] J)/(6.626 x [tex]10^{-14}[/tex] J s)

To learn more frequency of electromagnetic wave visit:

brainly.com/question/14320803

#SPJ1

Answer:

Explanation:

The reactant with the higher mass in grams is the limiting reactant. NO. [What counts is the numbers of molecules, not their mass.  For example In the reaction of oxygen and hydrogen to form water:

2H2 + O2 = 2H2O

We need twice as many H2 molecules than O2 molecules.  We need two moles of H2 and 1 mole of O2 (or anything with that 2:1 ratio).  But a mole of H2 only has a mass of 2 grams, so 2 moles is 4 grams.  A balanced reaction in thias case would consist of 2 grams of H2 for every 32 grams of O2.  If there were only 31 grams of O2, it would be the limiting reagent, despite the fact it's mass is still greater than that of H2O]

Calculate the amount of product that can be made with each reactant, then choose the reactant that produces the least amount of product.  YES  [Once the reactant is consumed in producing the least amount of product, no more product will be produced, desoppite the fact that the other reactant reamins.]

Calculate the amount of product that can be made with each reactant, then choose the reactant that produces the most amount of product. NO

[This ignores the fact that the reaction stops when the other reactant is depleted.]

The reactant with the lower mass in grams is the limiting reactant.  NO, for the same reasons as in 1).

To determine the relative activities of X, Y, and Z, you could complete a galvanic cell experiment.

Start by combining a small chip of X and a small chip of Y in a beaker of distilled water, then connect the two chips with a copper wire. Next, place the two dropper bottles containing solutions of [tex]XC^{12}[/tex] (aq) and [tex]ZC^{12}[/tex] (aq) in a separate beaker of distilled water, then connect the two bottles with a copper wire. Finally, connect the two beakers with a copper wire, and measure the voltage created by the circuit. The greater the voltage generated, the greater the activity of the metal, meaning the metal with the highest voltage is the most active.

For more question on galvanic cell click on

https://brainly.com/question/25577710

#SPJ11

A sea breeze and a land breeze are both caused by differences in temperature and pressure between the land and sea.

During the day, the land heats up more quickly than the water, so the air above the land becomes warmer and less dense than the air above the sea. This causes a low-pressure zone to form over the land and a high-pressure zone to form over the sea. The cooler, denser air over the sea then moves inland to replace the rising warm air, creating a sea breeze.

During the night, the opposite occurs. The land cools more quickly than the sea, so the air above the land becomes cooler and denser than the air above the sea. This causes a high-pressure zone to form over the land and a low-pressure zone to form over the sea. The cooler, denser air over the land then moves offshore to replace the rising warm air, creating a land breeze.

To know more about temperature visit:-

brainly.com/question/29072206

#SPJ1