a heating coil has a resistance of 22 ohms and can safely handle 15 a of current what is the maximum voltage that it can be connected to without burning out

Answer:

Explanation:

kinetic energyu inmcrease

The correct option is B, The best definition for hypothermia is "very low internal body temperature caused by cold temperatures." Hypothermia occurs when the body loses heat faster than it can produce heat, leading to a dangerously low body temperature.

Hypothermia is a medical condition that occurs when the body's core temperature drops below the normal range, usually below 95 degrees Fahrenheit (35 degrees Celsius). It is typically caused by exposure to cold temperatures for extended periods or immersion in cold water.

As the body loses heat faster than it can produce it, various symptoms may develop, including shivering, confusion, dizziness, fatigue, slurred speech, and clumsiness. In severe cases, hypothermia can lead to organ failure, coma, and even death. Treatment for hypothermia involves rewarming the body, either passively or actively, and providing supportive care to address any complications that may arise.

To learn more about Hypothermia visit here:

brainly.com/question/6552936

#SPJ4

A secondary group is impersonal and goal-oriented in contrast to a major group. It only touches a small portion of its members' life. Secondary organizations arise to carry out a particular task.

Larger and more impersonal secondary groups are frequent. Additionally, they could be time- and task-limited. The roles of these groups are more goal- or task-oriented than emotional, serving an instrumental purpose as opposed to an expressive one. A secondary group can be one's coworkers or other classmates.

To learn more about secondary group, click:

https://brainly.com/question/30854001

#SPJ1

Using the impulse-momentum theorem, the sled takes 1.46 seconds to travel from point A to point B.

The impulse-momentum theorem relates the impulse acting on an object to its change in momentum. In this problem, we can use this theorem to determine the time it takes for the sled to travel from point A to point B.

First, we need to determine the change in momentum of the sled as it moves from point A to point B. We can do this using the formula:

Δp = mΔv

where Δp is the change in momentum, m is the mass of the sled, and Δv is the change in velocity of the sled.

Δp = mΔv

Δp = m(vB - vA)

Δp = (m)(4.8 m/s - 7.6 m/s)

Δp = -3.6m

The negative sign indicates that the sled is losing momentum as it moves from point A to point B.

Next, we can use the impulse-momentum theorem to relate the change in momentum to the impulse acting on the sled. The impulse is given by the formula:

J = Δp

where J is the impulse.

J = Δp

J = -3.6m

Now, we can use the definition of impulse to relate it to the force acting on the sled and the time it takes for the force to act. The force is given by:

F = ma

where F is the force, m is the mass of the sled, and a is the acceleration of the sled.

The force of kinetic friction acting on the sled is given by:

Ff = μkN

where Ff is the force of friction, μk is the coefficient of kinetic friction, and N is the normal force acting on the sled.

Since the sled is moving horizontally, the normal force is equal to the weight of the sled:

N = mg

where g is the acceleration due to gravity.

Now, we can combine these equations to solve for the time it takes for the sled to travel from point A to point B:

J = FΔt

-3.6m = μkNΔt

-3.6m = μkmgΔt

Δt = -3.6m / (μkmg)

Substituting the given values, we get:

Δt = -3.6m / (0.25)(m)(9.81 m/s²)

Δt = -1.46 s

Since the time cannot be negative, we take the absolute value of the result:

Δt = 1.46 s

Therefore, the sled takes 1.46 seconds to travel from point A to point B.

To know more about impulse-momentum theorem, refer to the link below:

https://brainly.com/question/14121529#

#SPJ11

10.2 cm separates the hubcap from the face. The magnitude of the hubcap's radius of curvature is 0.318 cm.

To determine the distance between the enthusiast's face and the hubcap, use the concept of mirror images formed by curved surfaces.

In the first scenario, when the enthusiast sees an image of his face 10.2 cm behind the hubcap, we can assume that the hubcap acts as a concave mirror.

The distance between the face and the hubcap is equal to the focal length of the mirror.

Therefore, the face is 10.2 cm away from the hubcap.

In the second scenario, when the hubcap is turned over, it now acts as a convex mirror.

The distance between the face and the hubcap remains the same.

From the given information, the image of the face appears 29.4 cm behind the hubcap.

This distance corresponds to the focal length of the convex mirror, which is negative. So, the focal length is -29.4 cm.

To find the magnitude of the radius of curvature, we can use the mirror equation:

1/f = 1/v - 1/u,

where f is the focal length, v is the image distance, and u is the object distance.

Plugging in the values:

1/-29.4 = 1/29.4 - 1/10.2.

Simplifying the equation:

[tex]1/-29.4 = (10.2 - 29.4)/(29.4 * 10.2).[/tex]

Solving for the left-hand side:

-29.4 = -0.318.

Taking the reciprocal of both sides:

-1/29.4 = -1/0.318.

Thus, the magnitude of the radius of curvature is approximately 0.318 cm.

For more such questions on magnitude, click on:

https://brainly.com/question/24468862

#SPJ11

The blood alcohol concentration (BAC) is a measure of the amount of alcohol in a person's bloodstream. A BAC of 0.15g/dL or 150mg/dL indicates a significant level of intoxication. It's important to note that the number of drinks needed to reach this BAC can vary depending on several factors, such as a person's weight, gender, and the rate at which they consume alcohol.

It's difficult to provide an exact number of drinks that would result in a BAC of 150mg/dL or 0.15g/dL, as individual tolerance and metabolism can differ greatly. However, a general guideline is that consuming about 4-5 standard alcoholic drinks within an hour for a 160-pound male, or 3-4 drinks for a 120-pound female, could potentially lead to this level of intoxication.

Keep in mind that these figures are only approximate and that everyone's body processes alcohol differently. It's always best to drink responsibly and avoid driving or operating machinery while under the influence of alcohol.

brainly.com/question/28420811

#SPJ11

If the cable were given an additional full wrap around the pulley at c and the worker can apply a force of 50 lb to the cable, this would effectively double the tension in the cable. Therefore, the tension in the cable would be 2(400 lb) = 800 lb.

To determine the largest weight that may be lifted at d, we need to consider the forces acting on the system. There are two tension forces acting on the cable, one pulling up from d and one pulling down from the weight at c. There is also the weight of the load pulling down.

Using the principle of equilibrium, we can set the sum of the forces in the vertical direction equal to zero. This gives us:

800 lb - Td - W = 0

where Td is the tension force pulling up from d and W is the weight of the load.

Solving for W, we get:

W = 800 lb - Td

To determine the largest weight that can be lifted, we need to find the maximum tension force that the worker can apply to the cable. Since the worker can apply a force of 50 lb, the maximum tension force would be 50 lb multiplied by the number of cables wraps around the pulley at c. Since there is now one additional wrap, the maximum tension force would be:

50 lb x 2 = 100 lb

Therefore, the largest weight that can be lifted is:

W = 800 lb - Td = 800 lb - 100 lb = 700 lb

So the largest weight that can be lifted at d is 700 lb.

Learn more about  tension here:

https://brainly.com/question/11348644

#SPJ11

It should be noted that to begin exploring the mission's directives, understanding the scientific objectives of the voyage is imperative.

The focus of Lucy's exploration aims to study a unique collective of asteroids referred to as Trojan asteroids that revolve around the sun in conjunction with Jupiter. By comprehensively examining these primitive asteroids, scientists hope to uncover critical insights into how our Solar System came into existence.

Once familiar with the pursuable matters at hand during this expedition, learning about the vessel responsible for conducting such research becomes pertinent. Equipped with an array of advanced scientific instruments catered towards thoroughly studying asteroids and solar panels to power its operations, Lucy also boasts flexible trajectory capabilities due to its propulsion system.

Learn more about space on

https://brainly.com/question/30385726

#SPJ1

Answer:

D. Jupiter

Explanation:

The largest planet in the solar system is Jupiter (by Mass)

Each deviation in the numerator for variance is squared because: a. without squaring each deviation, the solution could be negative

The terms "deviation," "variance," and "squared" are key to understanding this concept. Deviation refers to the difference between each data point and the mean of the dataset. Variance is a measure of dispersion, indicating how spread out the data points are in a dataset.
When calculating variance, you first find the deviation of each data point from the mean. Squaring these deviations is essential because it eliminates the possibility of obtaining a negative value in the solution. Negative values could arise due to the presence of both positive and negative deviations, which would cancel each other out if not squared. By squaring the deviations, all values become positive, ensuring an accurate representation of the dataset's dispersion. Thus, the primary reason for squaring deviations in the numerator for variance is to avoid a negative solution and obtain a true measure of the data's spread.

learn more about deviation refer: https://brainly.com/question/20553308

#SPJ11

complete question:

Each deviation in the numerator for variance is squared because ______.

a. without squaring each deviation, the solution could be negative

b. this inflates the value for variance, making it more accurate

c. without squaring each deviation, the solution for SS would be zero

d. all of these

Answer: acceleration = -1.68 m/s^2

Explanation: First, you need to convert the speeds to meters per second (m/s) since acceleration is typically measured in m/s^2.

2.0 km/hr = 0.56 m/s

0.5 km/hr = 0.14 m/s

Next, you use the formula for acceleration: acceleration = (final velocity - initial velocity) / time

Plugging in the values, we get: acceleration = (0.14 m/s - 0.56 m/s) / 0.25 hr

acceleration = (-0.42 m/s) / 0.25 hr

acceleration = -1.68 m/s^2

Once the consecutive Charges square measure opposite in Sign like in between two same charges field lines square measure faint, however, once they're opposite in magnitude then field lines are closure and field intensity is greatest.x

4. In F, the negative charge is five times greater than E, therefore, the line is going to be a lot curved compared to E, and field density is going to be higher just in the case of F compare to E.

5. Two same charges repel one another, therefore, field lines additionally repeal one another.

Once the consecutive Charges square measure opposite in Sign like in between two same charges field lines square measure faint, however, once they're opposite in magnitude then field lines are closure and field intensity is greatest.x

Read more about electric field lines here:

https://brainly.com/question/14372859

#SPJ1

The dot product between two vectors is a scalar value that measures the extent to which the two vectors point in the same direction. The dot product is negative when the angle between the vectors is obtuse, meaning it is greater than 90 degrees.

To understand why this is the case, consider the formula for the dot product:
a · b = |a| |b| cos θ
where a and b are two vectors, |a| and |b| are their magnitudes, θ is the angle between them, and cos θ is the cosine of that angle.
If the angle between the vectors is acute, meaning it is less than 90 degrees, then cos θ is positive and the dot product is positive. If the angle between the vectors is right (90 degrees), then cos θ is 0 and the dot product is 0. However, if the angle between the vectors is obtuse, meaning it is greater than 90 degrees, then cos θ is negative and the dot product is negative.
In summary, the dot product between two vectors is negative when the angle between them is greater than 90 degrees, or when the answer is B) between 90 and 180 degrees.

learn more about vectors here

https://brainly.com/question/13492374

#SPJ11

Spheres A and B have the same mass and radius but are composed of different materials. Sphere B has a denser core and a less dense shell.

Comparing the moment of inertia of spheres A and B. Given that both spheres A and B have identical mass and radius, but sphere B has a more dense core and a less dense shell, we can determine the relationship between their moments of inertia about their centers of mass.

To do this, we'll use the following equation for the moment of inertia of a solid sphere: I = (2/5)MR², where M is the mass of the sphere, R is its radius, and I is its moment of inertia.

For sphere A (uniform density), its moment of inertia can be calculated as:
Ia = (2/5)MaRa²

For sphere B (non-uniform density with a denser core), its moment of inertia can also be calculated using the same equation, but since it has a more dense core and a less dense shell, its moment of inertia will be smaller than that of sphere A. This is because the mass is distributed closer to the center, which reduces the moment of inertia.

So, comparing the moments of inertia for spheres A and B:
Ia > Ib

Thus, the correct answer is (a): Ia > Ib.

To know more about the moment of inertia refer here :

https://brainly.com/question/30051108#

#SPJ11

(A) The distance from the central maximum to the first bright fringe would be 2.01°(B) the angle from the central maximum to the second dark fringe is  3.01° .(C) The distance would be 0.666meter from the central maximum to the first bright fringe.

Here, can be  written as,

(A) Position of nth bright fringes is,

y = nDλ/d

D = distance between slits and screen

d= separation of slits

λ = wavelength

And here n = 1 for first bright fringe

y = Dλ/d

tanθ = y/D = λ /d

θ = tan⁻¹(λ/d)

θ = tan ⁻¹(543× 10⁻⁹m/1.55×10⁻⁵m)

θ = 2.01°

At 2.01° angle from central maximum to first bright fringe.

(B) For dark fringe

y = (n+1/2)(Dλ/d)

And for second dark fringe n=1

y=  (1+1/2)(Dλ/d)

tanθ = y/D

tanθ = 3/2 (543× 10⁻⁹m/1.55×10⁻⁵m)

θ = 3.01°

At  3.01° angle from central maximum does the second dark fringe appear.

(C) From part A may write as,

y = Dλ/d

y = (1.9m)(543× 10⁻⁹m/1.55×10⁻⁵m)

y = 0.666meter

Thus,  the distance  0.666meter from the central maximum to the first bright fringe.

The complete questions is,

Light at 543 nm from a helium–neon laser shines on a pair of parallel slits separated by 1.55 ✕ 10−5 m and an interference pattern is observed on a screen 1.90 m from the plane of the slits. (a)Find the angle (in degrees) from the central maximum to the first bright fringe.

(b) At what angle (in degrees) from the central maximum does the second dark fringe appear? (c) Find the distance (in m) from the central maximum to the first bright fringe.

To know more about fringe

https://brainly.com/question/20324380

#SPJ1

Mixed wave frequencies presented together produce a phenomenon called interference, which can result in either constructive or destructive interference, depending on the alignment of the waves' phases.

Mixed wave frequencies presented together can produce interference patterns that can either amplify or cancel out certain frequencies. This is known as the principle of superposition. The resulting pattern is determined by the amplitude and phase of each wave. This phenomenon can be observed in a variety of natural phenomena, such as sound waves and light waves. In the case of sound waves, interference can lead to the creation of beats or harmonics, while in the case of light waves, interference can produce colorful patterns such as those seen in soap bubbles or oil slicks.
To know more about properties of sound waves, click here:-

https://brainly.com/question/8845912

#SPJ11

The evidence for dark matter comes from observations of the gravitational effects it has on visible matter and cosmic microwave background radiation.

The existence of dark matter was first proposed to explain the observed gravitational effects on visible matter, such as stars in galaxies and clusters of galaxies, that could not be accounted for by the visible matter alone. These observations suggested the presence of a large amount of matter that is not visible, hence the term "dark" matter. Additional evidence for dark matter comes from observations of the cosmic microwave background radiation, which is the remnant radiation from the Big Bang. The patterns of the cosmic microwave background radiation suggest that dark matter played a critical role in the formation of the large-scale structure of the universe. While the nature of dark matter is still unknown, its presence is inferred from its gravitational effects on visible matter and radiation.

learn more about gravitational effects here:

https://brainly.com/question/14433868

#SPJ11

The correct statement according to Bernoulli's principle is (C),the pressure in a fluid is lower where the fluid is moving faster.

The correct statement according to Bernoulli's principle is (C).

The pressure in a fluid is lower where the fluid is moving faster.

Bernoulli's principle states that for a non-viscous incompressible fluid undergoing streamline flow, the pressure of the fluid decreases as the speed of the fluid increases.

This means that where the fluid is moving faster, the pressure is lower, and where the fluid is moving slower, the pressure is higher. This principle is often used to explain phenomena such as lift on airplane wings and the flow of fluids through pipes.

The other statements in the question are not directly related to Bernoulli's principle. Density does play a role in the buoyant force on an object submerged in a fluid, but this is due to Archimedes' principle.

The speed of air over an airplane wing is related to Bernoulli's principle, but the statement is incomplete and does not fully explain the phenomenon of lift.

The density of a fluid increases with depth, but this is due to gravity and the weight of the fluid above, not Bernoulli's principle.

Learn more about Bernoulli's principle

brainly.com/question/30471862

#SPJ11

The tungsten metal's ability to expel electrons has a maximum threshold wavelength of 462.5 nm.

When a substance absorbs electromagnetic radiation, a phenomenon known as the photoelectric effect causes electrically charged particles to be discharged from or within the material.

We can use the photoelectric effect equation to solve this problem:

E = hf - Φ

where:

E = maximum kinetic energy of the ejected electron

h = Planck's constant

f = frequency of the incident radiation

Φ = work function of tungsten (the energy required to remove an electron from the metal)

We can convert the given wavelength a = 2000 Å to frequency using the speed of light c:

f = c / λ = c / (a × 10⁻¹⁰ m) = (3.00 × 10⁸ m/s) / (2000 × 10⁻¹⁰ m) = 1.50 × 10¹⁵ Hz

Now we can substitute the values given into the photoelectric effect equation:

1.64 eV = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - Φ

Solving for the work function Φ:

Φ = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - 1.64 eV = 4.30 × 10⁻³⁴ J

The threshold frequency or wavelength is the one where the energy of the photon is just enough to overcome the work function and eject the electron. This occurs when the maximum kinetic energy of the ejected electron is zero. Setting E = 0 in the photoelectric effect equation and solving for the corresponding frequency or wavelength:

0 = hf - Φ

f = Φ / h = 4.30 × 10⁻¹⁹ J / 6.63 × 10⁻³⁴ J·s = 6.49 × 10¹⁴ Hz

λ = c / f = (3.00 × 10⁸ m/s) / (6.49 × 10¹⁴ Hz) = 462.5 nm

Therefore, the threshold wavelength above which it will not be possible to eject electrons from tungsten metal is 462.5 nm.

Learn more about photoelectric effect on:

https://brainly.com/question/1408276

#SPJ11

The tungsten metal's ability to expel electrons has a maximum threshold wavelength of 462.5 nm.

When a substance absorbs electromagnetic radiation, a phenomenon known as the photoelectric effect causes electrically charged particles to be discharged from or within the material.

We can use the photoelectric effect equation to solve this problem:

E = hf - Φ

where:

E = maximum kinetic energy of the ejected electron

h = Planck's constant

f = frequency of the incident radiation

Φ = work function of tungsten (the energy required to remove an electron from the metal)

We can convert the given wavelength a = 2000 Å to frequency using the speed of light c:

f = c / λ = c / (a × 10⁻¹⁰ m) = (3.00 × 10⁸ m/s) / (2000 × 10⁻¹⁰ m) = 1.50 × 10¹⁵ Hz

Now we can substitute the values given into the photoelectric effect equation:

1.64 eV = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - Φ

Solving for the work function Φ:

Φ = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - 1.64 eV = 4.30 × 10⁻³⁴ J

The threshold frequency or wavelength is the one where the energy of the photon is just enough to overcome the work function and eject the electron. This occurs when the maximum kinetic energy of the ejected electron is zero. Setting E = 0 in the photoelectric effect equation and solving for the corresponding frequency or wavelength:

0 = hf - Φ

f = Φ / h = 4.30 × 10⁻¹⁹ J / 6.63 × 10⁻³⁴ J·s = 6.49 × 10¹⁴ Hz

λ = c / f = (3.00 × 10⁸ m/s) / (6.49 × 10¹⁴ Hz) = 462.5 nm

Therefore, the threshold wavelength above which it will not be possible to eject electrons from tungsten metal is 462.5 nm.

Learn more about photoelectric effect on:

brainly.com/question/1408276

#SPJ11

Answer:

An active galaxy emits up to thousands of times more energy than a normal galaxy and long jets of gas can spew forth from the galaxy at nearly the speed of light.

Explanation:

       A normal galaxy has a dormant super massive black hole at the center, and it is at a sleeping state after being fed on gas and matter. Whereas an active galaxy also has a super massive black hole at the center and is constantly feeding on gas, matter, stars and other things.

      Active galaxies are either quasars, blazars, or radio galaxies. They are significantly more luminous than a normal galaxy because they produce more electro-magnetic radiations across the spectrum from x-rays to radio waves.

      Active galaxies have shown to have a smaller number of star forming regions than normal galaxies because of the active nature of the AGN at the center causes high amounts of electromagnetic radiation which disturbs the star forming regions and it would take so much time to form new stars.

https://brainly.com/question/31711955: Click here for more information.

When a large, positively charged conducting sphere is touched by a small, negatively charged conducting sphere,

a. charges flow until both spheres have the same potential.

b. The larger sphere gains some negative charge from the smaller sphere, while the smaller sphere loses some of its negative charges.

When a large, positively charged conducting sphere is touched by a small, negatively charged conducting sphere, charges flow from the smaller sphere to the larger sphere until both reach the same potential.

The potential is the measure of electrical potential energy per unit charge, so when the two spheres have the same potential, they have equal electrical potential energy per unit charge.

Regarding the charges on the two spheres, we can say that the large sphere gains some negative charge from the smaller sphere, while the smaller sphere loses some of its negative charges. This is because charges always flow from a higher potential to a lower potential until both reach the same potential. The larger sphere had a lower potential than the smaller sphere because it was positively charged, so charges flowed from the higher potential (the smaller sphere) to the lower potential (the larger sphere).

To learn more about positively charged, refer:-

https://brainly.com/question/2903220

#SPJ11

In this experiment to investigate the specific heat capacity of iron, it is important to identify the independent variables that were held constant throughout the trials.

The mass of water and the mass of the iron sample are examples of quantities that were held constant, as they were always 175g and 75g respectively. The initial temperature of the water was also held constant at 20°C. However, the initial temperature of the iron sample varied in each trial, with options of 30°C, 40°C, 60°C, or 80°C.

Therefore, the initial temperature of the iron sample is not an example of a quantity that was held constant.

The final temperature of the mixture of water and iron is also not a quantity that was held constant, as it was recorded as the dependent variable and varied depending on the initial temperature of the iron sample.

By holding certain variables constant, the experiment can be conducted more accurately and effectively to investigate the specific heat capacity of iron.

To know more about  initial temperature refer here:

https://brainly.com/question/16257814#

#SPJ11

Maximum amplitude = (0.50 * 9.8 m/[tex]s^2[/tex]) / (2π * 2.0 Hz)[tex]^2[/tex] ≈ 0.249 m

To prevent the block from slipping along the surface, the maximum amplitude of the simple harmonic motion (SHM) can be determined by considering the maximum value of the centripetal acceleration acting on the block.

The centripetal acceleration required to prevent slipping is given by:

ac = ω^2 * R

where ω is the angular frequency of the SHM and R is the amplitude of the motion.

The maximum static friction force (fs) can be calculated using the coefficient of static friction (μs) and the normal force (N) acting on the block. In this case, the normal force is equal to the weight of the block (mg).

fs = μs * N = μs * mg

Since the centripetal acceleration is provided by the friction force, we have:

ac = fs / m = (μs * mg) / m = μs * g

Setting the centripetal acceleration equal to the maximum value, we get:

μs * g = ω^2 * R

Solving for R:

R = (μs * g) / ω^2

Substituting the given values, with μs = 0.50, g = 9.8 m/s^2, and ω = 2π * 2.0 Hz, we can calculate R:

R = (0.50 * 9.8 m/s^2) / (2π * 2.0 Hz)^2 ≈ 0.249 m or 24.9 cm

Therefore, the maximum amplitude of the SHM can be approximately 24.9 cm to prevent the block from slipping along the surface.

For more such questions on amplitude, click on:

https://brainly.com/question/3613222

#SPJ11

An object has a mass of 25 grams and has a length of 5 cm, a width of 1 cm, and a height of 5 cm, then its density is 1000 kg/m³.

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity.

In this problem,

Given,

mass m = 25 g = 0.025 kg

length l = 5 cm = 0.05 m

width w = 1 cm = 0.01 m

height h = 5 cm = 0.05 m

The volume of the object = hlw = 0.05×0.05×0.01 = 25 × 10⁻⁶ m³

Density = mass/ volume = 0.025 kg / 25 × 10⁻⁶ m³

Density = mass/ volume = 1000 kg/m³

To know more about density :

https://brainly.com/question/29775886

#SPJ1.

Answer:

Most meteoroids are small fragments of rock created by asteroid collisions. Comets also create meteoroids as they orbit the sun and shed dust and debris. When a meteoroid enters Earth's upper atmosphere, it heats up due to friction from the air.

Explanation:

Hope this helped! Please mark me brainliest!

Answer:

Most meteoroids are small fragments of rock created by asteroid collisions. Comets also create meteoroids as they orbit the sun and shed dust and debris. When a meteoroid enters Earth's upper atmosphere, it heats up due to friction from the air.

Explanation:

The majority of meteors are cometary, coming from cometary debris, whereas the majority of meteorites are asteroidal, coming from the asteroid belt between Mars and Jupiter.

A comet's tail is made of gas and dust that is released when it approaches the sun. Comets are composed of ice, dust, and rocky material. The comet leaves a trail of debris as it travels around the sun. A meteor shower is produced as Earth travels through this debris trail because the particles burn up in the atmosphere. But not all meteors originate from comets. Some came from fragments of asteroids that crashed and split apart. The fragments may then impact the planet as meteorites. Due to the nature of the material that falls to Earth, most meteorites are asteroidal in origin while the majority of meteors are cometary in origin.

learn more about asteroidal here:

https://brainly.com/question/18726579

#SPJ11

To levitate the foil, the laser beam must exert enough radiation pressure to counteract the force of gravity on the foil. This radiation pressure is proportional to the intensity of the laser beam, which can be related to its power using the formula:

power = intensity x area

Assuming that the laser beam is circular and has a radius r, the area it covers on the foil is πr^2. Therefore, the power needed to levitate the foil can be expressed as:

p = (mg) / (πr^2)

where m is the mass of the foil, g is the acceleration due to gravity, and π is a constant.

This expression shows that the power needed to levitate the foil is directly proportional to its mass, and inversely proportional to the area covered by the laser beam. This makes intuitive sense, as a larger laser beam will spread the radiation pressure over a larger area, making it less effective at levitating the foil.

In practice, other factors such as the reflectivity of the foil and the absorption properties of the laser beam will also affect the power required to levitate it. However, the above expression provides a good starting point for understanding the basic physics of laser levitation.

learn more about the force of gravity here: brainly.com/question/29236134

#SPJ11

The greatest distance is 94.5 million miles and the least distance is 91.4 million miles from the Sun.

The distance from the Earth to the Sun varies throughout the year due to the elliptical shape of the Earth's orbit.

The length of the major axis is 186,000,000 miles and the eccentricity is 0.0167.

Using Kepler's Laws, we can calculate the greatest and least distances from the Earth to the Sun.

The distance from the Sun to one end of the major axis is known as the aphelion, and it is approximately 94.5 million miles.

The other end of the major axis is known as the perihelion, and it is approximately 91.4 million miles from the Sun.

These distances have a significant impact on the Earth's climate, causing seasonal changes and affecting the planet's overall temperature.

For more such questions distance, click on:

https://brainly.com/question/26550516

#SPJ11

Answer: The velocity of each car after collision is 10m/s an -20m/s

Explanation:

using conservation of mommentum

m1u1+m2u2=m1v1+m2v2       but m1=m2

20m-10m =mv1+mv2

10=v1+v2......................................eqn1

using conservation of eenergy

1/2mu1^2 + 1/2mu2^2 = 1/2mv1^2 +1/2mv2^2

u1^2+u2^2=v1^2 +v2^2

(20)^2 + (-10)^2=v1^2+V2^2

400+100 = V1^2+V2^2

500 = V1^2+V2^2............................EQN2

using those two equations we can find the value of v1 and v2