A known volume of a solution prepared by dissolving a known mass of zinc chloride to a final volume of 100.0 mL will be titrated. The volume of the titrant, EDTA, needed to complex free Zn2+ in the sample is used to calculate the #moles of Zn in the sample, and indirectly, the moles Cl present. Which of the following mathematical operations gives you the number of moles of zinc which were titrated? A.)mass = #moles EDTA used to titrate sample X (1 mole Zn / 1 mole EDTA) X molar mass of zinc B.)mass = mass of sample titrated - mass of zinc complexed C.)volume EDTA x [EDTA] (moles / L) x ( 1 mole Zn / 1 mole EDTA) D.)mass = mass zinc chloride x volume of sample titrated 100.0 mL

The final temperature is 171.5 K and the work done per unit mass is 0.051 kJ/kg.

To solve this problem, we need to apply the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:

ΔU = Q - W

Since the process is adiabatic, there is no heat transfer, so Q = 0. Therefore:

ΔU = -W

We also know that the process is reversible, which means that the gas can be considered to be in thermodynamic equilibrium at all times. This allows us to use the adiabatic relation between pressure, volume, and temperature:

[tex]$P_{1}V_{1}^{\gamma} = P_{2}V_{2}^{\gamma}$[/tex]

where γ is the ratio of the specific heats, which is given in the table as 1.66 for helium.

Since the process is steady-flow, we can assume that the mass flow rate is constant, which means that the work done per unit mass is equal to the total work done divided by the mass flow rate. Therefore:

[tex]$W/m = \int P, dV = \int \frac{P_{1}V_{1}^{\gamma}}{V^{\gamma}}, dV$[/tex]

Integrating this expression from [tex]V_1[/tex] to [tex]V_2[/tex], we get:

[tex]$W/m = \frac{P_{2}V_{2} - P_{1}V_{1}}{\gamma - 1}$[/tex]

Substituting the given values, we get:

[tex]$W/m = \frac{550 , \mathrm{kPa} \times 0.0266 , \mathrm{m}^{3}/\mathrm{kg} - 90 , \mathrm{kPa} \times 0.0266 , \mathrm{m}^{3}/\mathrm{kg}}{1.66 - 1} = 0.051 , \mathrm{kJ/kg}$[/tex]

Since ΔU = -W, we can use the ideal gas law to calculate the change in internal energy:

[tex]$\Delta U = U_{2} - U_{1} = C_{v,m} \times (T_{2} - T_{1}) = -W$[/tex]

where C_v,m is the specific heat at constant volume per unit mass, which is given in the table as 3.116 kJ/kg·K for helium.

Rearranging this expression and substituting the given values, we get:

[tex]$T_{2} = T_{1} - \frac{W}{C_{v,m} \ln \left(\frac{P_{2}}{P_{1}}\right)} = 30^\circ \mathrm{C} + \frac{0.051 , \mathrm{kJ/kg}}{3.116 , \mathrm{kJ/kg\cdot K} \times \ln \left(\frac{550 , \mathrm{kPa}}{90 , \mathrm{kPa}}\right)} = 171.5 , \mathrm{K}$[/tex]

To learn more about temperature

https://brainly.com/question/15267055

#SPJ4

Monterey is generally colder than Virginia Beach.

Monterey is located on the central coast of California and is influenced by a cool, marine climate due to its proximity to the Pacific Ocean. Virginia Beach, on the other hand, is located in the southeastern part of Virginia and has a humid subtropical climate with hot summers and mild winters.

The average annual temperature in Monterey is around 57°F (14°C), with average winter temperatures ranging from 43-59°F (6-15°C) and average summer temperatures ranging from 52-67°F (11-19°C). In Virginia Beach, the average annual temperature is around 60°F (15°C), with average winter temperatures ranging from 33-50°F (1-10°C) and average summer temperatures ranging from 70-85°F (21-29°C).

Overall, Monterey tends to have cooler temperatures throughout the year compared to Virginia Beach. However, it's worth noting that temperatures can vary widely depending on the time of year and specific weather patterns, so it's always best to check local forecasts when planning a trip.

To know more about the Virginia Beach, here

https://brainly.com/question/22068242

#SPJ1

Elements from the six columns starting with column 3A and ending with column 8A make up the p-block, which is located on the right side of the periodic table.

Thus, The p-block does not include helium, which is located at the top of column 8A. The p-block is orange in the periodic table displayed below.

Because their valence electrons (or outermost electrons) reside in the p orbital, P-block elements are all related.

The six lobed geometries that make up the p orbital are uniformly spaced out from a central point. There are six columns in the p-block because the p orbital can only accommodate a maximum of six electrons.

Thus, Elements from the six columns starting with column 3A and ending with column 8A make up the p-block, which is located on the right side of the periodic table.

Learn more about p block, refer to the link:

https://brainly.com/question/28864428

#SPJ1

If the reaction quotient is greater than the solubility product in a solution of magnesium ions and sulfate ions, a precipitate will form. This occurs because the excess ions in the solution cannot remain solvated and will combine to form a solid.

When a chemical substance in the solid state and a solution containing the molecule are in chemical equilibrium, this is known as a solubility equilibrium. As a result of some molecules migrating between the solid and solution phases, the rates of precipitation and dissolution are equal in this sort of equilibrium, which is an example of dynamic equilibrium. The solution is referred to as saturated when equilibrium has been reached but not all of the solid has completely dissolved. The solubility is the quantity of the solute in a saturated solution. Molar (mol dm3) or mass per unit volume (g mL1) units of solubility are also acceptable. Temperature affects how easily substances dissolve. Higher concentrations of solute than the solubility are said to be present in a solution.

To know more about solubility product click here:

https://brainly.com/question/1419865

#SPJ11

An anemometer measures the velocity of airflow.

To learn more about velocity click here:

https://brainly.com/question/24259848

#SPJ11

The antacid tablet neutralized 0.000563 moles of HCl.

The balanced chemical equation for the reaction between HCl and aluminum hydroxide (the active ingredient in antacids) is:

Al(OH)₃ + 3HCl → 3H₂O + AlCl₃

From the equation, we can see that each mole of aluminum hydroxide (Al(OH)₃) can neutralize 3 moles of HCl.

To find the moles of HCl neutralized by the antacid tablet, we first need to calculate the moles of NaOH used in the titration. We can do this using the equation:

moles NaOH = Molarity x Volume (in liters)

First, we need to convert the volume of NaOH used in the titration from milliliters to liters:

8.45 mL = 8.45/1000 = 0.00845 L

Now we can plug in the values to find the moles of NaOH:

moles NaOH = 0.20 M x 0.00845 L = 0.00169 moles

Since the reaction between NaOH and HCl is a 1:1 reaction, we know that 0.00169 moles of NaOH neutralized the same number of moles of HCl. Therefore, the moles of HCl neutralized by the antacid tablet can be calculated using the mole ratio from the balanced equation:

1 mole of Al(OH)₃ : 3 moles of HCl

0.00169 moles of NaOH x (1 mole of HCl / 1 mole of NaOH) x (1 mole of Al(OH)₃ / 3 moles of HCl) = 0.000563 moles of Al(OH)₃

So, the antacid tablet neutralized 0.000563 moles of HCl.

Learn more about antacids at https://brainly.com/question/28285654

#SPJ11

Answer:

Option D. The tilt of the Earth's axis.

Explanation:

The tilt of the Earth's axis causes the changing seasons. As the Earth orbits around the sun, the tilt of the axis results in the angle at which the sun's rays hit the Earth's surface to change, causing variations in temperature and the amount of daylight throughout the year. This causes the distinct seasons in temperate deciduous forests, with hot summers and cold winters, as well as the changing colors of the leaves of deciduous trees.

Answer: THE ANSWER IS D.)  "the tilt of the Earth's axis"

Explanation: I JUST TOOK THE 60 QUESTION SCIENCE EXAM ON K12

The three types of convergent plate boundaries are ocean-ocean, ocean-continent, and continent-continent.

A zone where two or more tectonic plates converge is referred to as a convergent border. The land inside the boundary area is altered as a result. In areas where convergent borders exist, earthquakes and volcanic eruptions are highly common.

Depending on the type of crust that is present on either side of the boundary—oceanic or continental—convergent borders, where two plates are moving toward one another, can be classified into one of three categories. Mountains and mountain ranges are created when two continental plates collide, pulling up the rock at the boundary and crumpling and folding it.

To know about convergent plate

https://brainly.com/question/15115188

#SPJ4

Stereochemistry refers to the spatial arrangement of atoms in molecules. When looking at molecules in Marvin View, it  evident that changes in stereochemistry can greatly impact the three-dimensional structure of the molecules.

In the case of monosaccharides, two examples that differ most in their three-dimensional structure are D-glucose and D-fructose. These differences arise due to variations in the configuration of their functional groups and the arrangement of atoms in space.

The Suzuki reaction affects the stereochemistry of the starting components in a way that preserves the stereochemistry of the vinyl boronic acid and vinyl halide.

Certain substances include two stereogenic centres or more. The stereochemistry that results depends on whether or not those centres are equivalent. Equivalent sterogenic centres have similar sets of substituents.

For every  non-equivalent centres, there are 2n stereoisomers. Some enantiomer pairings are included in these isomers. Due to the opposite configuration in each centre, these stereoisomers are mirror reflections of one another. All stereoisomers are also diastereomers.

Learn more about stereochemistry here

https://brainly.com/question/28658912

#SPJ11

Chromates, peroxides, and permanganates are typically reactive oxidizing agents, which have a tendency to accept electrons and undergo reduction in a chemical reaction. The class of chemicals that is incompatible with them is reducing agents. Therefore the correct option is option D.

In a chemical reaction, reducing agents are compounds that have a propensity to transfer electrons and proceed through oxidation. Compatibility problems with reducing agents can lead to fire, explosion, the production of hazardous fumes, or the generation of heat.

Although chromates, peroxides, and permanganates can also react with acids and bases, these particular substances are oxidising agents, which are normally incompatible with reducing agents. Therefore the correct option is option D.

For such more question on reducing agents:

https://brainly.com/question/18370994

#SPJ11

A ceiling level is a level that is not to be exceeded at any time.

A ceiling level refers to the maximum concentration of a substance that should never be surpassed in the given environment, such as a workplace or laboratory, to ensure safety and prevent any harmful effects.This indicates that regardless of the length of time, a worker exposed to a concentration greater than the CEV may experience health impacts. This exposure cap is closely adhered to for chemicals and biological agents that might have long-term negative impacts on health.

To learn more about concentration, click here:

https://brainly.com/question/12674058

#SPJ4

The concept ideal gas equation is used here to determine the molar mass of the unknown gas. The ideal gas law is also known as the general gas equation and it is an equation of the state of a hypothetical ideal gas.

The ideal gas equation is developed as a result of the combination of the Boyles law, Charles's law and Avogadro's law. The ideal gas equation has several limitations.

The ideal gas law is:

PV = nRT

Number of moles = Given mass / Molar mass = m / M

99.0kpa = 0.977 atm

68.0 C = 341 K

72.5 cm³ = 0.0725 L

PV = m / M RT

0.977 × 0.0725 = 0.207 / M 0.0821 × 341

0.977 × 0.0725 = 5.795 / M

M = 82.78 g / mol

Thus the molar mass is 82.78 g / mol.

To know more about molar mass, visit;

https://brainly.com/question/30640134

#SPJ1

The heat released or absorbed during a phase change of water. Since the specific phase change and heat capacities are not mentioned, I'll provide a general step-by-step explanation using the terms "water" and "undergoes." The phase change Determine whether water undergoes melting, freezing, vaporization, or condensation.

The relevant heats of phase change heat of fusion or heat of vaporization. Convert grams to moles Divide the given mass of water 30.0 g by the molar mass of H2O 18.015 g/mol to find the number of moles (n). n = 30.0 g / 18.015 g/mol ≈ 1.67 moles Calculate the heat absorbed or released during the phase change Use the formula q = n × ΔH, where q represents heat, n is the number of moles calculated in Step 2, and ΔH is the heat of phase change fusion or vaporization provided in the problem. Determine the sign of the heat If the phase change is endothermic absorbing heat, such as melting or vaporization, the heat will be positive. If it's exothermic releasing heat, such as freezing or condensation, the heat will be negative. By following these steps, you can calculate the heat released or absorbed when water undergoes a phase change.

learn more about water here.

https://brainly.com/question/28465561

#SPJ11

To determine the stronger acid from each pair of oxyacids based on their molecular structure, consider the electronegativity and the stability of the conjugate base.

A stronger acid has a more stable conjugate base with higher electronegativity, resulting in a weaker bond and easier release of a hydrogen ion (H+). Compare the molecular structures of the oxyacids in each pair to identify the stronger acid.

The chemical elements are arranged in a tabular format according to increasing atomic number in the periodic table.

The tendency of an atom to draw a shared pair of electrons towards itself is explained by the chemical property known as electronegativity. Electronegativity increases as you walk across the periodic table from left to right, and decreases as you move down the table.

Learn more about Electronegativity here

https://brainly.com/question/17762711

#SPJ11

The average molecular mass of the gas, the average distance between the molecules, and the average speed of the molecules will all decrease when the sample of ideal gas is cooled from 50.0oC to 25.0oC in a sealed container of constant volume.

Here correct option is I.

This is due to the fact that the cooled gas molecules will have less energy and thus less kinetic energy to move around and interact with each other.

This decrease in energy results in a decrease in the average speed of the molecules, and thus a decrease in the average distance between them. Since the average distance between the molecules is reduced, the average molecular mass of the gas will also decrease.

The decrease in average speed of the molecules is due to the decrease in temperature of the gas. As the temperature decreases, the average kinetic energy of the molecules decreases, causing them to move slower.

This decrease in kinetic energy results in a decrease in the average speed of the molecules, and thus a decrease in the average distance between them. As the average distance between the molecules decreases, the average molecular mass of the gas will also decrease.

In conclusion, when a sample of an ideal gas is cooled from 50.0oC to 25.0oC in a sealed container of constant volume, the average molecular mass of the gas, the average distance between the molecules, and the average speed of the molecules will all decrease.

This is due to the fact that the cooled gas molecules have less energy and thus less kinetic energy to move around and interact with each other.

Know more about kinetic energy here

https://brainly.com/question/26472013#

#SPJ11

1. The concentration of H2C6H6O6 is given as 0.0439 M. Assuming complete dissociation, the initial concentration of HC6H6O6- is also 0.0439 M. Therefore, [HC6H6O6-] = 0.0439 M.

2. The pH of the solution is 2.59.

C6H5COOH ⇌ H+ + C6H5COO-

Ka = [H+][C6H5COO-] / [C6H5COOH]

6.5 × [tex]10^{-5}[/tex]= [H+]² / 0.478

[H+] = 0.00255 M

Using the pH formula, we can then calculate the pH of the solution:

pH = -log[H+]

pH = -log(0.00255)

pH = 2.59

3. HCN + H2O ⇌ H3O+ + CN-

Ka = [H+][CN-] / [HCN]

4.9 × [tex]10^{-10}[/tex] = [H+]² / 0.563

[H+] = 1.57 × [tex]10^{-5}[/tex]M

Kw = [H+][OH-]

1.0 × [tex]10^{-14}[/tex] = (1.57 × [tex]10^{-5}[/tex])[OH-]

[OH-] = 6.37 × [tex]10^{-10}[/tex] M

Concentration refers to the amount of a substance that is present in a given volume or mass of another substance. It is a measure of the relative amount of solute present in a solution or mixture. The most common ways of expressing concentration in chemistry are molarity, molality, percent composition, and parts per million.

Molarity, denoted as M, is the number of moles of solute per liter of solution. Molality, denoted as m, is the number of moles of solute per kilogram of solvent. Percent composition is the mass of solute present in a solution expressed as a percentage of the total mass of the solution. Parts per million (ppm) is a measure of the concentration of a solute in a solution, expressed as the number of parts of the solute per million parts of the solution.

To learn more about Concentration visit here:

brainly.com/question/10725862

#SPJ4

The formal charge on N in the cation [H₂NSF₂]⁺ is +1.

To determine the formal charge of an atom in a molecule or ion, we need to compare the number of valence electrons in the free atom to the number of electrons around the atom in the molecule or ion. The formal charge of an atom can be calculated using the formula:

Formal charge = (number of valence electrons in the free atom) - (number of lone-pair electrons) - (number of bonds)

In the given cation [H₂NSF₂]⁺, the central N atom is bonded to two H atoms, one S atom, and one F atom. Each H atom contributes one valence electron to the bonding, S contributes 6 valence electrons, F contributes 7 valence electrons, and N contributes 5 valence electrons.

Therefore, the number of valence electrons around N is (2+6+7)=15. The N atom also has one lone pair of electrons. Hence the formal charge on N can be calculated as:

Formal charge = 5 - 2 - (1/2)(4) = +1

The positive formal charge on N indicates that it has lost one electron and has a deficient octet. However, the octet rule is not violated as there are still eight electrons around N (six from the bonds and two from the lone pair).

To know more about formal charge, refer here:
https://brainly.com/question/11723212#
#SPJ11

The phenylmethanol is typically reacted with potassium manganate in a reaction vessel or flask equipped with a condenser to allow for reflux during the oxidation reaction.

To react phenylmethanol with potassium manganate, you can use a round-bottom flask as the apparatus. Here's a step-by-step explanation:
1. Add phenylmethanol to a round-bottom flask.
2. Add an aqueous solution of potassium manganate to the flask.
3. Stir the mixture to ensure proper mixing of the reactants.
4. Monitor the reaction, as the potassium manganate oxidizes the phenylmethanol.
Remember to follow safety protocols and wear appropriate personal protective equipment while performing the reaction.

To learn more about potassium manganate click here https://brainly.com/question/25070246

#SPJ11

In organic and other advanced labs, it is important to ensure proper safety measures are taken when working with chemicals.

In this context, glove material must be selected carefully based on the chemicals in use. While nitrile gloves offer adequate protection for a wide range of chemicals, it is essential to verify their compatibility with the specific substances being handled in the lab. Latex gloves may not always be preferred over nitrile gloves due to potential allergies and varying levels of chemical resistance. Lastly, "double-gloving" can be employed as a precautionary measure, but its necessity depends on the risk associated with the specific chemicals and procedures being used.

To learn more about chemicals click here https://brainly.com/question/29240183

#SPJ11

There are 0.1247 moles of calcium in 5.00 g of calcium.

The formula to calculate the number of moles is:

moles = mass (in grams) / molar mass

Substituting the values we have:

moles of calcium = 5.00 g / 40.08 g/mol

moles of calcium = 0.1247 mol

A mole is a unit of measurement that represents a certain number of particles. Specifically, one mole of a substance contains Avogadro's number of particles, which is approximately 6.02 x 10^23. These particles can be atoms, molecules, ions, or any other type of particle that can exist in a chemical system.

The concept of moles is important because it allows chemists to easily convert between the mass of a substance and the number of particles it contains. This is because the molar mass of a substance, which is the mass of one mole of that substance, is equal to the sum of the atomic masses of all the atoms in one molecule of that substance. This means that if you have 18 grams of water, you have one mole of water, and if you have any other mass of water, you can easily calculate how many moles of water you have using the molar mass.

To learn more about Moles visit here:

brainly.com/question/31597231

#SPJ4

Scientists are still working to completely comprehend a number of events. Here are a few instances:

A type of stuff known as "dark matter" is invisible to telescopes because it does not emit, absorb, or reflect light. Its gravitational effects on observable matter have implied its existence, but its nature and makeup are still unknown.

Scientists are still working to fully understand the phenomenon of consciousness, or the individual's subjective experience of awareness. There is no commonly accepted theory that explains how subjective experience results from physiological processes in the brain, despite advances in identifying the neurological correlates of consciousness.

Despite being a widely accepted scientific theory, quantum mechanics' consequences and interpretations are still controversial.

Learn more about Quantum mechanics, here:

https://brainly.com/question/11855107

#SPJ1

There is an inversion of stereochemistry, which implies a back-side attack of the nucleophile as in SN₂ reaction the nucleophile attacks opposite from the side of the leaving group.

SN2 (Substitution Nucleophilic Bimolecular) reactions occur when a nucleophile attacks an electrophilic carbon atom and substitutes a leaving group. In SN₂ reactions, the nucleophile attacks from the opposite side of the leaving group, which causes the stereochemistry at the reaction center to invert.
The size of the anion can affect the nucleophilicity due to solvation, with larger anions being less suppressed by solvation.

Additionally, smaller anions may be more solvated by ion-dipole forces.

However, these factors do not directly influence the stereochemical outcome of the SN₂ reaction.

Learn more about stereochemistry : https://brainly.com/question/13266152

#SPJ11

A. The unpaired electron in the outer shell of the compound CH3 makes it a free radical species and extremely reactive.

A species known as a free radical is one that has an unpaired electron in its outer shell, making it highly reactive and capable of taking part in chemical processes that can be both good and bad. A free radical is represented by the symbol •. Only A is an option from the list. The existence of an unpaired electron is indicated by the presence of the symbol for •CH3:. So, •CH3 is a type of free radical. Free radicals play a role in a number of biological and chemical processes, including immunological response, oxidative damage, and cell signalling.

learn more about free radical  here:

https://brainly.com/question/29422803

#SPJ11

Five of the "big six" polymers undergo "addition" polymerization.

Monomeric units are chemically bound during condensation polymerization, a chemical process that takes place when water is removed.

One kind of nylon or polyamide is nylon 66, sometimes known variously as nylon 6-6, nylon 6-6, nylon 6,-6, or nylon 6:6. For the textile and plastic sectors, it and nylon 6 are the two most popular materials. Hexamethylenediamine and adipic acid, which give nylon 66 its name, are two monomers that each contain six carbon atoms.

To know more about polymerization visit:-

https://brainly.com/question/27354910

#SPJ11

The general anode efficiency rating of zinc is 80%. Zinc is commonly used as an anode material in cathodic protection systems because of its high electrochemical potential, which makes it more reactive than the metal it is protecting. When a zinc anode is installed, it corrodes instead of the protected metal.

This process is called sacrificial corrosion, and it helps to prevent the protected metal from corroding by sacrificing the anode. The efficiency of the anode is determined by the amount of corrosion it undergoes during this process. In the case of zinc, its efficiency rating is typically around 80%. This means that 80% of the anode's content is loaded onto the metal it is protecting, while the remaining 20% is lost to the environment. Overall, zinc is an effective and commonly used material for cathodic protection systems.

learn more about zinc here.

https://brainly.com/question/13890062

#SPJ11

A) RP0285. Metallic structures and corrosion control systems are critical components of many industries and infrastructure. These structures, including pipelines, storage tanks, bridges, and buildings, are often exposed to harsh environments that can lead to corrosion and deterioration over time.

Corrosion can lead to structural damage, product leaks, environmental contamination, and safety hazards.

Corrosion control systems are designed to protect metallic structures from the corrosive effects of the environment. These systems can include coatings, cathodic protection, and chemical inhibitors. Coatings can be applied to the surface of the structure to provide a barrier between the metal and the environment. Cathodic protection uses a direct current to protect the metal by creating a more negative potential on the metal surface, which reduces the corrosion rate. Chemical inhibitors work by reducing the corrosion rate through the use of corrosion inhibitors, which are added to the environment to slow down the corrosion process.

Regular inspection and maintenance of metallic structures and corrosion control systems are also important to ensure their continued effectiveness. This includes monitoring the condition of coatings and cathodic protection systems, as well as identifying and addressing areas of corrosion or deterioration. By implementing effective corrosion control systems and regularly maintaining these systems, the lifespan of metallic structures can be extended, reducing the need for costly repairs or replacements.

To know more about cathodic protection

brainly.com/question/31557529

#SPJ11

Based on the analysis of the unknown substance, which showed it has a high boiling point, is brittle, is an insulator as a solid, and conducts electricity when melted, the substance with these characteristics is SiF₄ (Silicon tetrafluoride).

The analysis showed that it has a high boiling point, which is a characteristic of compounds with strong intermolecular forces. SiF₄ is a covalent compound with a tetrahedral structure, and the F atoms strongly attract the electrons from Si, resulting in a polar covalent bond. The polar nature of the Si-F bond and the tetrahedral structure leads to a high boiling point. Additionally, SiF₄ is brittle, which is a characteristic of covalent compounds. It is an insulator as a solid because it does not have free electrons to conduct electricity, but it can conduct electricity when melted because the Si-F bonds break, and the F atoms become free to move and conduct electricity.

Learn more about insulators at https://brainly.com/question/1472743

#SPJ11

In general, nitrates, acetates, and alkali metal compounds are soluble, while most carbonates, sulfides, and some chlorides (such as AgCl and PbCl₂) are insoluble.

In aqueous solutions, compounds can be classified based on their solubility. Here is a brief classification of the given compounds:

1. NH₄HCO₃ (Ammonium bicarbonate) - Soluble
2. PbCl₂ (Lead chloride) - Insoluble
3. CuSO₄ (Copper sulfate) - Soluble
4. Sr(NO₃)₂ (Strontium nitrate) - Soluble
5. MgCl₂ (Magnesium chloride) - Soluble
6. KCH₃CO₂ (Potassium acetate) - Soluble
7. Ag₂SO₄ (Silver sulfate) - Insoluble
8. CaS (Calcium sulfide) - Insoluble
9. Ba(ClO₄)₂ (Barium perchlorate) - Soluble
10. RbF (Rubidium fluoride) - Soluble
11. Cs₂S (Cesium sulfide) - Soluble
12. AgCl (Silver chloride) - Insoluble
13. Ca(OH)₂ (Calcium hydroxide) - Slightly soluble
14. LiNO₃ (Lithium nitrate) - Soluble
15. NaOH (Sodium hydroxide) - Soluble
16. Na₂SO₄ (Sodium sulfate) - Soluble
17. SrCO₃ (Strontium carbonate) - Insoluble

Soluble compounds are those that readily dissolve in water, creating a homogeneous solution at the atomic scale. Insoluble compounds do not dissolve in water, remaining as solid particles or forming a precipitate. Slightly soluble compounds have limited solubility, meaning that only a small amount dissolves in water.

To know more about solubility, refer to the link below:

https://brainly.com/question/30701140#

#SPJ11

The pH of the aqueous solution that is the mixture of 0.10 M NaNO₂ and 0.20 M Ca(NO₂)₂ is 2.52.

To calculate the pH of the given aqueous solution, we need to first determine the concentration of HNO₂ in the solution. HNO₂ is a weak acid, and its Ka value is given as 4.5 x 10⁻⁴. We can write the dissociation reaction of HNO₂ as:

HNO₂ + H₂O ⇌ H₃O⁺ + NO₂⁻

The equilibrium constant expression for this reaction can be written as:

Ka = [H₃O⁺][NO₂⁻] / [HNO₂]

Assuming that the initial concentration of HNO₂ is negligible compared to the equilibrium concentration, we can simplify the expression as:

Ka = [H₃O⁺]² / [HNO₂]

Solving for [H₃O⁺], we get:

[H₃O⁺] = √(Ka * [HNO₂]) = √(4.5 *10⁻⁴ * 0.10) = 0.015

Now, we can use the concentration of Ca(NO₂)₂ to calculate the concentration of NO₂⁻ in the solution. Ca(NO₂)₂ dissociates into Ca²⁺ and 2NO₂⁻. Since NO₂⁻ is the conjugate base of HNO₂, it can react with H₃O⁺ to form HNO₂ and H₂O. This reaction can be written as:

NO₂⁻ + H₃O⁺ ⇌ HNO₂ + H₂O

The equilibrium constant expression for this reaction can be written as:

Kb = [HNO₂][H₂O] / [NO₂⁻][H₃O⁺]

Since Kb for NO₂⁻ is related to Ka for HNO₂ as:

Ka x Kb = Kw = 1.0 * 10⁻¹⁴

We can use this relation to calculate Kb for NO₂⁻ as:

Kb = Kw / Ka = 1.0 x 10⁻¹⁴ / 4.5 x 10⁻⁴ = 2.22 x 10⁻¹¹

Assuming that the initial concentration of NO₂⁻ is negligible compared to the equilibrium concentration, we can simplify the expression for Kb as:

Kb = [HNO₂][H₂O] / [NO₂⁻]

Solving for [HNO₂], we get:

[HNO₂] = Kb * [NO₂⁻] / [H₂O] = 2.22 * 10⁻¹¹ * (2 * 0.20) / 55.5 = 1.59 * 10⁻¹²

Now, we can use the concentrations of HNO₂ and NO₂⁻ to calculate the pH of the solution using the equation:

pH = -log[H₃O⁺] = -log(√(Ka x [HNO₂] / [NO₂⁻])) = -log(√(4.5 x 10⁻⁴ x 0.10 / (2 x 0.20))) = 2.52

To know more about pH, refer to the link below:

https://brainly.com/question/9278932#

#SPJ11

Classify each of the following amino acids as polar or nonpolar. assume that they are at physiological pH. drag the appropriate items to their respective bins. Polar Aspartate (Asp) Nonpolar Methionine (Met), Leucine (Leu)

To classify the given amino acids as polar or nonpolar at physiological pH, we need to consider the properties of their side chains. The amino acids provided are Methionine (Met), Leucine (Leu), and Aspartate (Asp).

1. Methionine (Met) has a nonpolar side chain containing a sulfur atom. Hence, it is nonpolar.
2. Leucine (Leu) has an aliphatic nonpolar side chain, so it is nonpolar as well.
3. Aspartate (Asp) has a carboxyl group in its side chain, which ionizes at physiological pH, making it polar.

So, the classification is as follows:
Polar: Aspartate (Asp)
Nonpolar: Methionine (Met), Leucine (Leu)

Learn more about amino acids https://brainly.com/question/14351754

#SPJ11