Answer:
Explanation:
the addition of the soluable salt will cause the boiling point to be higher
a) greater than 200 degrees C. if an insoluble salt is added to a liquid that typically boils at 200 degrees C, its new boiling point will be greater than 200 degrees C.
When an insoluble salt is added to a liquid, it causes a change in the vapor pressure of the liquid, which in turn affects the boiling point of the liquid. The addition of an insoluble salt to a liquid raises its boiling point.
This is because the presence of the solute in the liquid reduces the vapor pressure of the liquid, making it more difficult for the liquid to boil. The boiling point of the liquid increases until the vapor pressure of the liquid once again matches the external pressure, at which point the liquid will boil.
Learn more about insoluble here:
https://brainly.com/question/18799126
#SPJ11
can you help me with this
. the two main sources for the increase of carbon dioxide in the atmosphere are . select one:
Answer:
combustion
respiration by humans
Explanation:
burning of wood leaves release carbon dioxide which is a green house gas and detrimental to the climate
if groundwater contaminant is not visible does that mean it is safe to drink? Explain
It depends on what you meant by saying not visible. Of it is not visible by using accurate measuring equipment then I think so, but if you mean that all transparent water is drinkable, then no. Think about this. When you put salt in water, you can't see it but it is still there: if you taste the water you can tell that there's salt in there. Let's say that instead of salt there are some bacteria, or some other type of salt which is not appropriate to drink at high levels, such as nitrates. I personally wouldn't recommend drinking from any type.of water unless you are not sure about its purity
What is wrong with the electron level diagrams/electron configurations below?
Answer:
a.) Instead of configuring all up before some down, all of the configurations were placed as up and down, leaving two spots empty in the 2p sublevel.
b.) There is a missing s sublevel for row 3.
c.) There are two up arrows in one of the lines.
d.) When you get to the "d" section you must subtract the number you're using by 1. So, it's supposed to be 2d to the power of 10.
A Carbon atom has a mass of 1.994 x10-23 g. If a sample of pure carbon has a mass of 42.552g, how many atoms would this contain? Show your work.
The sample of pure carbon would contain approximately 2.135 x 10²⁴ carbon atoms.
How many carbon atoms have masses that are equivalent to those in the periodic table?The majority of carbon atoms—98.93%—have masses of 12 atomic mass units. A mass of 13.00 atomic mass units is present in 1.07% of the carbon atoms. 14.) Identify one distinction between the nuclei of carbon-12 and carbon-13 atoms in terms of the subatomic particles that can be discovered there.
First, using the atomic mass of carbon, we must determine how many moles of carbon are present in the sample:
1 mole of carbon atoms = 12.01 g of carbon atoms (atomic mass of carbon)
42.552 g of carbon atoms / 12.01 g/mol = 3.545 moles of carbon atoms
Using Avogadro's number, we can then determine how many carbon atoms are present in the sample:
Number of carbon atoms = 3.545 moles of carbon atoms x 6.022 x 10²³ atoms/mole
Number of carbon atoms = 2.135 x 10²⁴ atoms
To know more about carbon atoms visit:-
https://brainly.com/question/30507533
#SPJ1
25. j. chadwick discovered the neutron by bombarding with the popular projectile of the day, alpha particles. (a) if one of the reaction products was the then unknown neutron, what was the other product? (b) what is the q-value of this reaction?
(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.
(b) The q-value of this reaction is the 5.9 × 10⁸ J.
The James Chadwick was discovered the neutron during the experiment involving the nuclear reaction in that the beryllium, bombarded with the alpha particles. The equation of the reaction is as :
⁴Be₉ + ²He₄ ----> ⁶C₁₂ + ⁰n₁
(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.
(b) The q-value of this reaction is as :
q = mc²
Where,
The m is the mass
The c is the speed of the light.
m = 4.002603 + 2.014102
m = 1.988501
q = 1.988501 × 3 × 10⁸
q = 5.9 × 10⁸ J
To learn more about James Chadwick here
https://brainly.com/question/14559793
#SPJ4
it takes 500 j of work to compress quasi-statically 0.50 mol of an ideal gas to one-fifth its original volume. calculate the temperature of the gas, assuming it remains constant during the compression.
As the compression is carried out quasi-statically, the gas's temperature will not change during the process. The temperature of the gas is T= 60.65 K.
The temperature of the gas will remain constant during the compression process since it is being done quasi-statically.
This means that the temperature of the gas will remain constant throughout the compression process.
Since the amount of work (500 J) is given, the temperature of the gas can be determined using the equation U = (3/2)nRT, where U is the work, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Solving for T, we find that the temperature of the gas is T = (2/3)(500 J)/(0.50 mol)(8.31 J/mol K) = 60.65 K.
Complete Question:
It takes 500 J of work to compress 0.50 mol of an ideal gas quasi-statically to one-fifth its original volume. What is the temperature of the gas, assuming it remains constant during the compression?
To learn more about temperature visit:
https://brainly.com/question/2339046
#SPJ4
at stp, what is the volume of 4.50 moles of nitrogen gas? at stp, what is the volume of 4.50 moles of nitrogen gas? 101 l 167 l 1230 l 60.7 l 3420 l
The volume of 4.50 moles of nitrogen gas at STP is approximately 101 L. So, the correct answer is 101 L.
At STP (standard temperature and pressure), the volume of one mole of any gas is 22.4 liters. Therefore, to find the volume of 4.50 moles of nitrogen gas at STP, we can simply multiply the number of moles by the molar volume:
At STP (Standard Temperature and Pressure), the volume of 4.50 moles of nitrogen gas (N2) can be calculated using the ideal gas law:
PV = nRT
Where P is the pressure (which is 1 atm at STP), V is the volume, n is the number of moles, R is the gas constant, and T is the temperature (which is 273.15 K at STP).
Rearranging this equation to solve for V, we get:
V = (nRT)/P
Substituting the values for n, R, P, and T, we get:
V = (4.50 mol x 0.08206 L atm K^-1 mol^-1 x 273.15 K)/1 atm
V = 101.3 L
For such more questions on STP:
https://brainly.com/question/27100414
#SPJ11
a random copolymer produced by polymerization of vinyl chloride and propylene has a number average molecular weight of 229,500 g/mol and a number degree of polymerization of 4,000. what is the average repeat unit molecular weight? select one: a. 62.5 g/mol b. 42.0 g/mol c. 57.4 g/mol d. 24.0 g/mol
The average repeat unit molecular weight for average molecular weight of 229,500 g/mol and a number degree of polymerization of 4,000 is equals to the 57.4 g/mol. So, option(c) is right one.
Polymers are large molecules made up of repeating structural units linked together. The degree of polymerization (DP) is the number of repeating units in the polymer molecule. The average molecular weight is the degree of polymerization (MP) multiplied by the molecular weight of the repeat unit (m) is written as [tex] \bar M_n = (DP)(m)[/tex]
We have a random copolymer produced by polymerization of vinyl chloride and propylene.
Average molecular weight= 229500 g/mol
Number degree of polymerization = 4000
Using the above formula, the average repeat unit molecular weight = 229500 g/mol/ 4000
= 57.37 ~ 57.4 g/mol
Hence, required value is 57.4 g/mol.
For more information about degree of polymerization, visit :
https://brainly.com/question/30751495
#SPJ4
2 NO(g)+Cl2(g)⇌2 NOCl(g) Kc=2000
A mixture of NO(g) and Cl
2
(g) is placed in a previously evacuated container and allowed to reach equilibrium according to the chemical equation shown above When the system reaches equilibrium, the reactants and products have the concentrations listed in the following table:
Species Concentration (M)
NO(g) 0.050
C12(g) 0.050
NOCl(g) 0.50
Which of the following is true if the volume of the container is decreased by one-half?
A. Q = 100, and the reaction will proceed toward reactants.
B. Q = 100, and the reaction will proceed toward products.
C. Q = 1000, and the reaction will proceed toward reactants.
D. Q = 1000, and the reaction will proceed toward products.
Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.
To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.
The balanced chemical equation for the reaction is:
2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)
At equilibrium, the concentrations of the species are:
[NO] = 0.050 M
[Cl2] = 0.050 M
[NOCl] = 0.50 M
Using these values, we can calculate the value of the reaction quotient Q:
Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000
Now we compare the value of Q to the equilibrium constant Kc:
Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000
Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.
When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.
In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.
Learn more about equilibrium here:
https://brainly.com/question/30807709
v
#SPJ11
The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.
How to determine the reactions at equilibrium?
To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.
When the volume is decreased by half, the concentrations of all species will double:
NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M
Now, calculate Q using the new concentrations:
Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000
So, Q = 1000. Now, compare Q to Kc:
Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.
To know more about Reaction Quotient:
https://brainly.com/question/24202150
#SPJ11
How many moles of h2 can be produced from x grams of mg in magnesium-aluminum alloy? the molar mass of mg is 24. 31 g/mol?
The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)
The balanced chemical equation for the reaction between Mg and HCl is,
Mg + 2HCl → MgCl₂ + H₂
This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:
Calculate the number of moles of Mg in x grams:
Number of moles of Mg = mass of Mg / molar mass of Mg
Number of moles of Mg = x / 24.31
Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:
Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)
Number of moles of H₂ = (x / 24.31) × (1/1)
To know more about moles, here
brainly.com/question/26416088
#SPJ4
phenacetin can be prepared from p-acetamidophenol, which has a molar mass of 151.16 g/mol, and bromoethane, which has a molar mass of 108.97 g/mol. the density of bromoethane is 1.47 g/ml. what is the yield in grams of phenacetin, which has a molar mass of 179.22 g/mol, possible when reacting 0.151 g of p-acetamidophenol with 0.12 ml of bromoethane?
The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.
To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.
First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:
0.12 ml x 1.47 g/ml = 0.1764 g bromoethane
Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:
moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol
moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol
Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.
The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:
moles phenacetin = 0.001 mol p-acetamidophenol
mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g
For such more questions on Phenacetin:
https://brainly.com/question/29460577
#SPJ11
when a 2.5 liter vessel is filled with an unknown gas at stp, it weighs 2.75 g more than when it is evacuated. determine the molar mass of the unknown gas
The molar mass of the unknown gas is 27.0 g/mol.
According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.
To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:
n = PV/RT
Substituting the values at STP, we get:
n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]
n = 0.1018 moles
The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.
So the molar mass of the gas can be calculated as:
molar mass = mass / moles
molar mass = 2.75 g / 0.1018 mole
molar mass = 27.0 g/mol
Therefore, the molar mass of the unknown gas is 27.0 g/mol.
Learn more about , the molar mass
https://brainly.com/question/22997914
#SPJ4
The molar mass of the unknown gas is 27.0 g/mol.
According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, the pressure is 1 atm, the volume is 2.5 L, and the temperature is 273.15 K.
To find the number of moles of gas present, we can rearrange the ideal gas law equation to solve for n:
n = PV/RT
Substituting the values at STP, we get:
n = (1 atm) x (2.5 L) / [(0.08206 L atm/mol K) x (273.15 K)]
n = 0.1018 moles
The difference in weight between the gas-filled vessel and the evacuated vessel is 2.75 g, which is the weight of 0.1018 moles of the unknown gas.
So the molar mass of the gas can be calculated as:
molar mass = mass / moles
molar mass = 2.75 g / 0.1018 mole
molar mass = 27.0 g/mol
Therefore, the molar mass of the unknown gas is 27.0 g/mol.
Learn more about , the molar mass
brainly.com/question/22997914
Pi bonding occurs in each of the following species EXCEPT...
(A) CO2 (B) C2H4 (C) CN− (D) C6H6 (E) CH4
CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.
The answer is (E) CH4.
Pi bonding refers to the sharing of electrons between two atoms that occurs when two atomic orbitals with parallel electron spins overlap. Pi bonds are formed by the sideways overlap of two p orbitals.
In the given options, all except CH4 have pi bonds:
(A) CO2 has two pi bonds between the carbon atom and the oxygen atoms.
(B) C2H4 has a double bond between the two carbon atoms, which consists of one sigma bond and one pi bond.
(C) CN− has a triple bond between the carbon and nitrogen atoms, consisting of one sigma bond and two pi bonds.
(D) C6H6 has six pi bonds due to the delocalized pi electron system in the benzene ring.
In contrast, CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.
Visit to know more about Sigma bonds:-
brainly.com/question/31377841
#SPJ11
the gain or loss of electrons from an atom results in the formation of a (an)
The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.
Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.
When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).
On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).
The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.
Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.
Visit to know more about Compound:-
brainly.com/question/26487468
#SPJ11
which pair of elements are nonmetals and gases at room temperature and normal atmospheric pressure ?
The pair of elements that are nonmetals and gases at room temperature and normal atmospheric pressure are:
Oxygen (O₂) - Oxygen is a nonmetal that exists as a diatomic gas at room temperature and normal atmospheric pressure. It is colorless, odorless, and tasteless.
Nitrogen (N₂) - Nitrogen is another nonmetal that exists as a diatomic gas at room temperature and normal atmospheric pressure. It is also colorless, odorless, and tasteless.
Both oxygen and nitrogen are essential components of the Earth's atmosphere, with nitrogen making up about 78% of the air we breathe and oxygen making up about 21%.
To know more about atmospheric pressure, visit:
https://brainly.com/question/30166820
#SPJ1
true or false a pure substance (such as h2o or iron) can only exist in three phases (solid, liquid, and gas)
A pure substance (such as H₂O or iron) can only exist in three phases (solid, liquid, and gas) - True.
A kind of matter with a predictable chemical composition and physical characteristics is referred to as a chemical substance. According to certain texts, a chemical compound cannot be physically divided into its component parts without rupturing chemical bonds. Chemical compounds, alloys, and simple substances (substances made up of a single chemical element) are all examples of chemical substances.
To distinguish them from mixes, chemical compounds are frequently referred to as 'pure'. Pure water is a popular illustration of a chemical substance; regardless of whether it is separated from a river or created in a lab, it has the same characteristics and hydrogen to oxygen ratio. Other chemicals that are frequently found in their purest forms are refined sugar (sucrose), gold, table salt (sodium chloride), and diamond (carbon). In reality, though, no material is completely pure, and chemical purity is determined by the chemical's intended application.
Learn more about Pure substance:
https://brainly.com/question/18452279
#SPJ4
someone help please its a sience testtt
The equator of the sun rotates faster than the poles.
How does the rotation of the equator of the sun differ from the rotation of the poles of the sun?The equator of the sun rotates faster than its poles. This is known as differential rotation, and it is due to the fact that the sun is not a solid body, but is composed of gas and plasma. The equatorial regions of the sun rotate faster because they are farther from the center of the sun, where the gravitational pull is stronger, and thus experience less resistance to their motion.
The period of rotation of the equator of the sun is shorter than that of the poles. The equator rotates once every 25.4 days, while the poles rotate once every 36 days.
Learn more about the sun:https://brainly.com/question/17376727
#SPJ1
The process of boiling is considered to be a (1) chemical change, because a new substance is formed (2) chemical change, because a new substance is not formed (3) physical change, because a new substance is formed (4) physical change, because a new substance is not formed
Answer:
physical change, because a new substance is not formed
Explanation:
Answer:
4) physical change, because a new substance is not formed
a physical change is where you can change the look and feel of whatever and get it back to what it was before but a chemical change. is a change where you can not get back to what it was originally
Explanation:
please give me brainliest
explain the relationship among the concentrations of major species in a mixture of weak and strong acids and bases
The concentrations of major species in a mixture of weak and strong acids and bases are determined by their dissociation behavior and interaction in a solution, influencing the overall pH and buffering capacity.
The relationship among the concentrations of major species in a mixture of weak and strong acids and bases can be understood through their dissociation and interaction in a solution.
Strong acids, such as HCl, fully dissociate in water, releasing a high concentration of H+ ions. Similarly, strong bases, like NaOH, dissociate completely, releasing a high concentration of OH- ions.
Weak acids, such as acetic acid (CH3COOH), only partially dissociate in water, releasing a smaller concentration of H+ ions. Likewise, weak bases, like ammonia (NH3), partially dissociate, releasing a smaller concentration of OH- ions.
When a mixture of weak and strong acids and bases is present, the strong species will react first due to their higher concentrations of H+ or OH- ions. This reaction will affect the pH of the solution, as well as the concentrations of the weak species, as they will be buffered by the strong species.
To learn more about buffering capacity click here
brainly.com/question/24188850
#SPJ11
what, if any, relationship is observed between the most probable molecular speed and the molar mass of the gas? the most probable molecular speed decreases as the molar mass of the gas increases. there is no relationship between the most probable molecular speed and the molar mass. the most probable molecular speed decreases as the molar mass of the gas decreases. the most probable molecular speed increases as the molar mass of the gas increases.
The correct statement is: the most probable molecular speed decreases as the molar mass of the gas increases. The relationship observed between the most probable molecular speed and the molar mass of the gas is that the most probable molecular speed decreases as the molar mass of the gas increases. This is because heavier molecules have more inertia and therefore move more slowly than lighter molecules. So, the larger the molar mass, the slower the molecular speed.
This relationship can be explained by the equation for the most probable molecular speed (V_p), which is derived from the Maxwell-Boltzmann distribution:
V_p = √(2 * R * T / M)
where:
- V_p is the most probable molecular speed
- R is the ideal gas constant
- T is the temperature in Kelvin
- M is the molar mass of the gas
As you can see from the equation, the most probable molecular speed (V_p) is inversely proportional to the square root of the molar mass (M). This means that when the molar mass increases, the most probable molecular speed decreases, and vice versa.
Learn more about molar mass at https://brainly.com/question/837939
#SPJ11
The relationship observed between the most probable molecular speed and the molar mass of the gas is the most probable molecular speed decreases as the molar mass of the gas increases.
This relationship can be explained by the following steps:
1. Molecular speed refers to the velocity of individual molecules in a gas sample.
2. Molar mass is the mass of one mole of a substance, usually expressed in grams per mole (g/mol).
3. The most probable molecular speed can be estimated using the Maxwell-Boltzmann distribution, which describes the distribution of molecular speeds in a gas.
4. According to this distribution, lighter molecules (with lower molar mass) tend to have higher molecular speeds than heavier molecules (with higher molar mass) at the same temperature.
5. Therefore, as the molar mass of a gas increases, the most probable molecular speed decreases.
To learn more about molecular speed, refer:-
https://brainly.com/question/19243977
#SPJ11
Calculate the heat capacity, in joules per degree of 28.4 g of water. Specific heat of H2O() = 4.184 J/g.°C a) 28.4 J/°C b) 119 J/°C Oc) 6.8 J/°C d) 0.147J/°C
The heat capacity of 28.4 g of water is 118.8976 J/°C. The closest option to this answer is option b) 119 J/°C.
To calculate the heat capacity of 28.4 g of water, we need to use the formula:
Heat capacity = mass x specific heat
where mass is given as 28.4 g and specific heat of water is given as 4.184 J/g.°C.
So, substituting the values in the formula, we get:
Heat capacity = 28.4 g x 4.184 J/g.°C
Heat capacity = 118.8976 J/°C
To calculate the heat capacity of 28.4 g of water, you need to multiply the mass of water (m) by its specific heat (c). The formula for heat capacity (Q) is:
Q = m × c
Given:
m = 28.4 g
c = 4.184 J/g.°C
Substitute the values and perform the calculation:
Q = 28.4 g × 4.184 J/g.°C = 118.8 J/°C
The closest answer among the given options is:
b) 119 J/°C
To learn more about mass of water click here
brainly.com/question/26789700
#SPJ11
Calculate the standard free-energy change at 25 ∘C for the following reaction: Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq) Express your answer to three significant figures and in units of kJ/mol.
Consider constructing a voltaic cell with one compartment containing a Zn(s) electrode immersed in a Zn2+ aqueous solution and the other compartment containing an Al(s) electrode immersed in an Al3+ aqueous solution. What is the spontaneous reaction in this cell?
Group of answer choices
Zn + Al3+ → Al + Zn2+
Al + Zn2+ → Zn + Al3+
3 Zn + 2 Al3+ → 2 Al + 3 Zn2+
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
Nickel and iron electrodes are used to build a voltaic cell. Based on the standard reduction potentials of Ni2+ and Fe3+, what is the shorthand notation for this voltaic cell?
Group of answer choices
Ni2+(aq)|Ni(s)||Fe(s)|Fe3+(aq)
Fe3+(aq)|Fe(s)||Ni(s)|Ni2+(aq)
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
Fe(s)|Fe3+(aq)||Ni2+(aq)|Ni(s)
For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we need to use the formula:
ΔG° = -nFE°
where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.
Step 1: Determine the half-reactions and their standard reduction potentials.
Mg2+(aq) + 2e- → Mg(s) E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s) E° = -0.76 V
Step 2: Determine the overall cell potential.
E°(cell) = E°(reduction) - E°(oxidation)
E°(cell) = (-0.76 V) - (-2.37 V) = 1.61 V
Step 3: Calculate the standard free-energy change.
ΔG° = -nFE°
ΔG° = -2 mol e- * 96,485 C/mol e- * 1.61 V
ΔG° = -310.44 kJ/mol
The standard free-energy change for this reaction at 25°C is -310 kJ/mol (rounded to three significant figures).
For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
For the voltaic cell with nickel and iron electrodes, the shorthand notation is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To know more about voltaic cell :
https://brainly.com/question/1370699
#SPJ11
For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
To calculate the standard free-energy change at 25°C for the reaction Mg2+(aq) + Zn(s) → Mg(s) + Zn2+(aq), we can use the following equation:
ΔG° = -nFE°
Where ΔG° is the standard free-energy change, n is the number of moles of electrons transferred in the reaction, F is Faraday's constant (96,485 C/mol), and E° is the standard cell potential.
First, we need to determine E°. We do this by looking up the standard reduction potentials for both half-reactions:
Mg2+(aq) + 2e- → Mg(s) E° = -2.37 V
Zn2+(aq) + 2e- → Zn(s) E° = -0.76 V
We can find the overall E° by subtracting the reduction potential of the reaction we need to reverse (Zn(s) → Zn2+(aq) + 2e-):
E° = -2.37 V - (-0.76 V) = -1.61 V
In this reaction, n = 2 since there are 2 moles of electrons transferred. Now we can calculate ΔG°:
ΔG° = -2 × 96,485 C/mol × (-1.61 V) = 310 kJ/mol (rounded to three significant figures)
For the voltaic cell with Zn(s) and Al(s) electrodes, the spontaneous reaction is:
2 Al + 3 Zn2+ → 3 Zn + 2 Al3+
For the voltaic cell with nickel and iron electrodes, based on the standard reduction potentials of Ni2+ and Fe3+, the shorthand notation for this voltaic cell is:
Ni(s)|Ni2+(aq)||Fe3+(aq)|Fe(s)
learn more about electrodes here
https://brainly.com/question/17060277
#SPJ11
what is the molar concentration of a solution that contains 45.0 g of nacl dissolved in 350.0 ml of water? question 36 options: 0.00220 m 2.20 m 12.9 m 129 m
, the molar concentration of the solution is 2.202 M. molar concentration of a solution that contains 45.0 g of nacl dissolved in 350.0 ml of water
To calculate the molar concentration of a solution, we need to first determine the number of moles of the solute present in the solution, and then divide that by the volume of the solution in liters.
The molar mass of NaCl is 58.44 g/mol. Therefore, the number of moles of NaCl in 45.0 g can be calculated as:
mole= mass / molar mass = 45.0 g / 58.44 g/mol = 0.7709 mol
Next, we need to convert the volume of the solution from milliliters to liters:
volume = 350.0 ml = 0.3500
Finally, we can calculate the molar concentration (M) of the solution as:
M = moles / volume = 0.7709 mol / 0.3500 L = 2.202 M
Learn more about concentration here:
https://brainly.com/question/30665317
#SPJ11
4. describe the relationship between the metal and water in terms of which is exothermic and which is endothermic.
PLEASE ANSWER 50 POINTS!!!!!
How many grams of NH3 form when 22g H2 react completely?
3H2 + N2 ---> 2NH3
H2: 2 g/mol NH3: 17 g/mol
22g H2 ----> gNH3
Answer:
mass of NH₃ formed when 22g of H₂ react completely = 124.67 grams
Explanation:
3H₂ + N₂ → 2NH₃
What is stoichiometryThe ratio of coefficients of reactants and products in the above reaction equation (3 : 1 : 2), is known as the stoichiometry of the reaction.
A stoichiometric amount of a reagent is the the optimum amount or ratio where, assuming that the reaction proceeds to completion, all of the reagent is consumed, there is no deficiency of the reagent, and there is no excess of the reagent. Thus if the stoichiometry of a reaction is known, as well as the mass of one of the substances, then it is possible to calculate the mass of any of the other substances.
What is a mole?The mole is a unit of amount of substance established by the International System of Units, to make expressing amounts of reactant or product in a reaction more convenient. As defined by Avogadro's Constant, a mole is 6.022×10²³ amounts of something. The mole is used in stoichiometric calculations, instead of the mass.
Converting between mass and molesTo convert from mass to moles, we need to divide the mass present in grams, by the molar mass of the substance (the sum of the molar masses of the individual elements comprising the compound), in g/mol, to get the moles. This can be represented by the formula: n = m/M, where n = number of moles, m = mass, M = molar mass.
So if we have 22 g of H₂ gas, which reacts completely, and therefore is a stoichiometric amount, then converting this to moles:
n(H₂) = m/M = 22/2 = 11 mol.
Using our stoichiometry, we can see that the ratio of H₂ to NH₃ = 3 : 2.
Therefore, for every 3 moles of H₂ used, we produce 2 moles of NH₃.
n(NH₃) = 2/3 × n(H₂) = 2/3 × 11 = 7.333 mol.
Finally, converting moles back to mass we get:
m(NH₃) = n×M = 7.333×17 = 124.67 grams
∴ mass of NH₃ formed when 22g of H₂ react completely = 124.67 grams
what is the total number of joules of heat energy needed to raise the temperature of 10 grams of water from 20 c to 30 c
The total number of joules of heat energy needed to raise the temperature of 10 grams of water from 20°C to 30°C is 418.4 J. The specific heat capacity of water is 4.184 J/g·°C.
To find the total heat energy needed, we can use the formula:
Q = m·c·ΔT
where:
Q = heat energy (in Joules)
m = mass of the water (in grams)
c = specific heat capacity of water (4.184 J/g·°C)
ΔT = change in temperature (in °C)
Substituting the values given, we get:
Q = 10 g × 4.184 J/g·°C × (30°C - 20°C)
Q = 418.4 J
Therefore, the total number of joules of heat energy needed to raise the temperature of 10 grams of water from 20°C to 30°C is 418.4 J.
Learn more about heat energy
https://brainly.com/question/29210982
#SPJ4
calculate the volume of a solution, in liters, prepared by diluting a 1.0 l solution of 0.40 m koh to 0.13 m.
The volume of a solution, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M is approximately 3.08 liters.
To calculate the volume of a solution, in liters, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M, you can use the dilution formula:
M1V1 = M2V2
where M1 is the initial molarity of the solution (0.40 M), V1 is the initial volume of the solution (1.0 L), M2 is the final molarity of the solution (0.13 M), and V2 is the final volume of the solution (in liters) that we need to find.
Rearrange the formula to solve for V2:
V2 = (M1V1) / M2
Now, plug in the given values:
V2 = (0.40 M * 1.0 L) / 0.13 M
V2 = 0.40 L / 0.13
V2 ≈ 3.08 L
So, the volume of the diluted solution is approximately 3.08 liters.
Learn more about the volume of a solution at https://brainly.com/question/29262229
#SPJ11
The volume of the solution after dilution is approximately 3.08 liters.
To calculate the volume of the solution, we can use the formula:
V1C1 = V2C2
where V1 is the initial volume, C1 is the initial concentration, V2 is the final volume, and C2 is the final concentration.
Plugging in the values given in the question, we get:
(1.0 L)(0.40 M) = V2(0.13 M)
Solving for V2, we get:
V2 = (1.0 L)(0.40 M) / (0.13 M) = 3.08 L
Therefore, the volume of the solution, in liters, prepared by diluting a 1.0 L solution of 0.40 M KOH to 0.13 M is 3.08 L.
Hi! I'd be happy to help you calculate the volume of the solution. To do this, we'll use the dilution formula:
C1V1 = C2V2
where C1 and V1 represent the initial concentration and volume, and C2 and V2 represent the final concentration and volume.
1. Plug in the given values:
C1 = 0.40 M (initial concentration of KOH)
V1 = 1.0 L (initial volume of the solution)
C2 = 0.13 M (final concentration of KOH)
2. Rearrange the formula to solve for V2:
V2 = (C1V1) / C2
3. Substitute the values into the formula:
V2 = (0.40 M × 1.0 L) / 0.13 M
4. Calculate V2:
V2 ≈ 3.08 L
So, the volume of the solution after dilution is approximately 3.08 liters.
Learn more about solution here:
https://brainly.com/question/31522192
#SPJ11
which category of amino acid contains r groups that are hydrophobic? which category of amino acid contains r groups that are hydrophobic? polar acidic basic non-polar basic and acidic
The amino acid that contains the R groups that are hydrophobic are the non - polar.
The Amino acids are the building blocks of the molecules of the proteins. These contains the one hydrogen atom and the one amine group, the one carboxylic acid group and the one side chain that is the R group will be attached to the central carbon atom.
The side chains of the non polar amino acids includes the long carbon chains or the carbon rings, which makes them bulky. These are the hydrophobic, that means they repel the water. Therefore the non-polar amino acids are the hydrophobic.
To learn more about amino acid here
https://brainly.com/question/12788134
#SPJ4
if each orange sphere represents 0.010 mol of sulfate ion, how many moles of acid and of base reacted?
The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used
Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.
If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.
For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:
[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]
In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.
For such more questions on Stoichiometry:
https://brainly.com/question/30417834
#SPJ11