When a negatively charged point particle is placed initially at rest in a uniform electric field, it will move towards the direction of the electric field.
An electric field is a vector field that represents the force exerted by charged particles over each other. It is generated by charges, and it affects other charged particles that are in the space around it. The direction of the electric field is given by the direction of the force that is experienced by a small positive test charge placed in that field. If the force on the test charge is towards the positive charge that creates the field, the electric field will point towards the positive charge. If the force on the test charge is towards the negative charge that creates the field, the electric field will point towards the negative charge.
When a negatively charged particle is placed in the electric field, it experiences a force in the direction opposite to the direction of the electric field, this is because the negatively charged particle is attracted towards the positively charged particles that generate the field, and so it moves towards them. Therefore, the negatively charged particle moves towards the direction of the electric field. When a positively charged particle is placed in the electric field, it experiences a force in the direction of the electric field. This is because the positively charged particle is attracted towards the negatively charged particles that generate the field, and so it moves towards them. Therefore, the positively charged particle moves towards the direction opposite to the direction of the electric field.
Learn more about electric field at:
https://brainly.com/question/4440057
#SPJ11
a rear window defroster consists of a long, flat wire bonded to the inside surface of the window. when current passes through the wire, it heats up and melts ice and snow on the window. for one window the wire has a total length of 11.0 m , a width of 1.8 mm , and a thickness of 0.11 mm . the wire is connected to the car's 12.0 v battery and draws 7.5 a . part a what is the resistivity of the wire material? express your answer with the appropriate units.
The resistivity of the wire material can be calculated using Ohm's Law, which states that V=IR, or voltage = current multiplied by resistance. Therefore, the resistivity of the wire material is [tex]2.87 \times 10^{-8} \Omega m[/tex].
Resistivity of wire is given as ρ=RA/L where R is the resistance of wire, A is the cross-sectional area of the wire, L is the length of the wire.
The formula to calculate the resistance of wire from Ohm's Law is given by R=V/I where V is the voltage, I is the current.
Substituting the given values: V = 12.0 V, I = 7.5 A.
Therefore, R=V/I=12.0 / 7.5 = 1.6 Ω
From the formula of resistivity:
[tex]\rho=\dfrac{RA}{L}\\R=\dfrac{ρL}{A}[/tex]
Substituting the given values: R = 1.6 Ω, L = 11.0 m and calculating the area:
[tex]A = (1.8 \times 10^{-3} m) (0.11 \times 10^{-3} m)\\ = 0.198 \times 10^{-6} m²[/tex]
Therefore,
[tex]\rho = RA/L\\= \dfrac{R \times A}{ L}\\= \frac{1.6 \times 0.198 \times 10^{-6}}{ 11.0}\\ = 2.87 \times 10^{-8 } \Omega m[/tex]
Therefore, the resistivity of the wire material is [tex]2.87 \times 10^{-8 } \Omega m[/tex].
For more details on resistivity, click on the below link:
https://brainly.com/question/30799966
#SPJ11
how much electric power (in kw ) does the heat pump use to deliver 19.0 kj/s of heat energy to the house?
The electric power used by the heat pump to deliver 19.0 kJ/s of heat energy to the house is 3.50 kW.
To find out the electric power used by a heat pump to deliver 19.0 kJ/s of heat energy to the house, we need to use the formula: P = Q/t
where P is the electric power used, Q is the heat energy delivered, and t is the time taken to deliver that heat energy.
We know that Q = 19.0 kJ/s, but we don't know the time taken t, so we need to find that out.
The time t can be calculated using the formula:t = Q / m
where m is the rate of heat transfer of the heat pump.
We are given that the heat pump has a coefficient of performance of 3.5. This means that for every 1 kW of electric power used by the heat pump, it delivers 3.5 kW of heat energy to the house.
Therefore, the rate of heat transfer of the heat pump is:m = 3.5 kW / 1 kW = 3.5So, t = Q / m = 19.0 kJ/s / 3.5 kW = 5.43 s
Now that we know the time taken t, we can find out the electric power used P using the formula:P = Q/t = 19.0 kJ/s / 5.43 s = 3.50 kW
Therefore, the electric power used by the heat pump to deliver 19.0 kJ/s of heat energy to the house is 3.50 kW.
To learn more about electric power:
https://brainly.com/question/13948282#
#SPJ11
if each charge has two field lines per unit of charge (q), what is the ratio of the total positive (red) charge to the total negative (blue) charge?
The ratio of total positive charge (red) to total negative charge (blue) is 1:1. This is because for each unit of charge (q), there are two field lines, one for the positive charge and one for the negative charge.
What are field lines?Field lines are a visual tool used to represent the direction and strength of an electrical field. The direction of a field line shows the direction of the force that a positive test charge would experience if it were placed at that point in the field. Meanwhile, the density of the field lines indicates the strength of the electric field.
Since each charge has two field lines per unit of charge (q), it means that the total number of field lines is proportional to the total charge. If there are equal numbers of field lines coming from both the positive and negative charges, it means that the ratio of the total positive charge to the total negative charge is 1:1.
Read more about electricity:
https://brainly.com/question/24786034
#SPJ11
water flows through a pipe with a cross-sectional area of 0.002 m2 at a mass flow rate of 4 kg/s. the density of water is 1 000 kg/m3. determine its average velocity. multiple choice question. 20 m/s 200 m/s 0.02 m/s 2 m/s 0.2 m/s
Option D: 2 m/s is the average velocity of the water flowing through a pipe with a cross-sectional area of 0.002 m2 at a mass flow rate of 4 kg/s.
According to the question:
cross-sectional area of the pipe = 0.002m²
Mass flowrate = 4 kg/s
Density of water = 1000 kg/m³
We are asked to find, average velocity =?
Average velocity is the net or total displacement covered by a body in a given time. The mass flow rate divided by the pipe's cross-sectional area and density ratio is the formula for calculating a fluid's average velocity.
As a result, the water's average flow rate through the pipe is provided by:
v = m / (ρ × A)
where, v is the average velocity, m is the mass flow rate, ρ is the density of water, and A is the cross-sectional area of the pipe. Substituting the values in the above equation we get:
v = 4 / (1000 × 0.002)
v = 2m/s
Therefore, the average velocity of water flowing through a pipe of cross-sectional area of 0.002m² is 2m/s.
To know more about average velocity, refer:
https://brainly.com/question/13243044
#SPJ4
Correct question is:
Water flows through a pipe with a cross-sectional area of 0.002 m2 at a mass flow rate of 4 kg/s. The density of water is 1 000 kg/m3. Determine its average velocity. Multiple choice question.
20 m/s
200 m/s
0.02 m/s
2 m/s
0.2 m/s
if a certain passenger arrives at the station at a time uniformly distributed between 7 and 8 a.m. and then gets on the first train that arrives, what proportion of time does he or she go to destination a?
The probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.
The uniform distribution is a type of probability distribution where all outcomes are equally likely. In this case, the passenger arrives at the station at a time that is uniformly distributed between 7 and 8 a.m. Therefore, the probability that the passenger will get on the first train that arrives is the same as the probability that they will arrive at the station between 7 and 8 a.m., which is 1/2.
In other words, the probability that the passenger will go to destination A is 1/2. This is because the probability that they will arrive between 7 and 8 a.m. and get on the first train that arrives is the same as the probability that they will arrive between 7 and 8 a.m., which is 1/2.
Therefore, the proportion of time the passenger goes to destination A is 1/2. This is because the probability of them getting on the first train that arrives is the same as the probability of them arriving between 7 and 8 a.m., which is 1/2.
For more such questions on Probability distribution.
https://brainly.com/question/14210034#
#SPJ11
a satellite is orbiting the earth at an altitude of 744 km above the surface of earth. what is the acceleration due to gravity in m/s2 at that altitude?
The acceleration due to gravity in m/s² at that altitude of 744 km is 9.797.
To find out what the acceleration due to gravity is in m/s² at an altitude of 744 km above the surface of earth, use the formula `g = Gm/r²`.
Given,The altitude of the satellite, h = 744 km,The radius of the earth, r = 6371 km, Formula for acceleration due to gravity:
g = Gm/r²
Here, the value of G, the universal gravitational constant, is 6.67 x 10^-11 Nm²/kg².Mass of the Earth, m = 5.97 x 10^24 kg.Let's calculate the radius of the orbit, R.Radius of the orbit = r + h= 6371 + 744 = 7115 km = 7.115 x 10^6 m.So, we have,
g = Gm/R²= 6.67 x 10^-11 x 5.97 x 10^24 / (7.115 x 10^6)²= 9.797 m/s².Therefore, the acceleration due to gravity in m/s² at that altitude is 9.797.
More on acceleration: https://brainly.com/question/21975712
#SPJ11
calculate the work done on the block by the spring during the motion of the block from its initial position to where the spring has returned to its uncompressed length.
The work done on the block by the spring during its move from its initial position to where the spring has returned to its uncompressed length is[tex]W = (1/2) \times k \times x^2[/tex].
We need to know the spring constant (k) and the displacement of the block (x) from its initial position to the position where the spring has returned to its uncompressed length. We can use the formula:
W = (1/2) * k * x^2
where W is the work done on the block, k is the spring constant, and x is the displacement of the block.
This formula is derived from the potential energy stored in the spring, which is given by:
U = (1/2) * k * x^2
where U is the potential energy stored in the spring.
When the block is initially at rest, the spring is compressed, and it has potential energy given by U = - (1/2) * k * x^2, where x is the initial compression of the spring.
Note that the negative sign indicates that the work done by the spring is negative, which means that the spring is doing work on the block in the opposite direction to the displacement of the block. This is because the spring force is always directed opposite to the displacement of the block.
As the block is released, the spring begins to push it back to its uncompressed length, and the block begins to move.
The work done on the block by the spring is equal to the change in potential energy of the spring, which is given by:
W = U_final - U_initial
Since the final position of the block is where the spring has returned to its uncompressed length, the final potential energy of the spring is zero. Therefore, the work done on the block by the spring is:
W = U_initial
Substituting the initial potential energy of the spring into this equation, we get:
W = (1/2) * k * x^2
Therefore, the work done on the block by the spring during its move from its initial position to where the spring has returned to its uncompressed length is given by the formula:
W = (1/2) * k * x^2
Learn more about spring:
https://brainly.com/question/14670501
#SPJ11
which satellite channel measures the temperature of the underlying surfaces (i.e., clouds, ocean, land)? group of answer choices visible infrared water vapor
Visible Infrared (IR) satellite channels measure the temperature of underlying surfaces. This includes clouds, oceans, and land.
IR channels work by detecting the amount of infrared radiation emitted from the Earth's surface. The intensity of the radiation is then converted into a digital number, which is displayed as a color on a satellite image. The higher the digital number, the warmer the surface temperature. This data can then be used to track changes in temperatures over time. The satellite channel that measures the temperature of the underlying surfaces is visible infrared. The surface temperature measurement is made possible by the difference in temperatures of objects in the infrared spectrum. An object's temperature and the level of radiation it emits have a direct correlation, and this is what visible infrared satellites use to take the temperature of the underlying surfaces. The visible infrared (VI) channel is used to estimate cloud cover and surface temperature. Infrared radiation from the surface of the earth is detected in this channel. The temperature of clouds, oceans, and land can be estimated using the visible infrared (VI) channel. It also provides data on how temperature changes with latitude and over time. Furthermore, the VI channel aids in the identification of cold and hot surfaces. Water vapor (WV) is another channel utilized in satellite imagery to observe the atmosphere's water vapor content. It enables meteorologists to forecast the occurrence of rainfall and other weather patterns. In general, satellite measurements assist in understanding Earth's weather and its impact on humans and the environment. These satellites help scientists to forecast severe weather, monitor weather changes over time, and analyze natural disasters. In addition, they assist in tracking the effects of climate change on the planet.
For more such questions on Satellites.
https://brainly.com/question/15168838#
#SPJ11
a 10.0-mf capacitor is fully charged across a 12.0-v bat- tery. the capacitor is then disconnected from the battery and connected across an initially uncharged capacitor with capacitance c. the resulting voltage across each capacitor is 3.00 v. what is the value of c?
The value of uncharged capacitor in series with a 10.0-microfarad capacitor, given that each capacitor has a voltage of 3.00 volts, can be calculated using the formula for equivalent capacitance in series and formula for charge on a capacitor. The value of c is approximately 4.00 microfarads.
To determine the value of c, which is [tex]1/Ceq = 1/C1 + 1/C2[/tex] . Initially, the 10.0-microfarad capacitor has a charge of [tex]Q = CV = (10.0 * 10^{-6 }F) * 12.0 V = 1.20 * 10^{-4} C[/tex].
When it is connected in series with uncharged capacitor with capacitance c, charge is shared between the two capacitors. The charge on 10.0-microfarad capacitor is also equal to the charge on uncharged capacitor, which is given by [tex]Q = (3.00 V) * C[/tex] .
Equating the two expressions for Q and solving for c, we get [tex]C = Q/3.00[/tex] [tex]V = (1.20 * 10^{-4 C}) / (3.00 V) = 4.00 * 10^{-5 F}[/tex]. Therefore, value of c is approximately 4.00 microfarads.
To know more about equivalent capacitance, here
brainly.com/question/30905469
#SPJ4
Research Galileo's work on falling bodies What did he wanted to demonstrate?What arguments did he use to prove that he was right?did be used experiments logic finding of other scientists or other approaches
Galileo Galilei conducted experiments on falling bodies to demonstrate that the rate of fall is independent of an object's mass. Galileo argued that if heavier objects did indeed fall faster, then two objects of different masses tied together would fall at an intermediate speed, which he found was not the case.
He used various methods to prove his point, including rolling balls down inclined planes, dropping weights from towers, and measuring the times of fall. He also used logic and mathematical reasoning to support his conclusions. Galileo's work marked a significant shift from traditional Aristotelian physics to the empirical approach of modern science.
To know more about modern science, here
brainly.com/question/30252960
#SPJ4
at what angle is the first-order maximum for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm?
The first-order maximum for 450-nm wavelength blue light falling on double slits separated by 0.0500 mm is approximately 6.2°.
The angle of the first-order maximum refers to the angle at which the brightest interference pattern appears on a screen placed behind two closely spaced slits when illuminated with the blue light of 450-nm wavelength.
The angle is determined by the equation:
theta_m = (m*lambda)/d
where m is the order, lambda is the wavelength, and d is the slit separation.
theta_m = (1*450E-9 m)/0.0500 mm
theta_m = 6.2°
Thus, the first-order maximum for double slits of 0.0500 mm at 450 nm λ blue light is around 6.2°.
To know more about first-order maximum click here:
https://brainly.com/question/14703717
#SPJ11
which will have a larger velocity upon hitting the ground: a rock thrown vertically upward from a bridge, or a rock thrown vertically downward from the same bridge? assume both rocks are thrown from the same height and with the same speed.
Assuming both rocks are thrown from the same height and with the same initial speed, the rock thrown vertically downward will have a larger velocity upon hitting the ground than the rock thrown vertically upward.
This is because the rock thrown upward will lose speed as it moves against the force of gravity. Eventually, the upward motion will be slowed down until the rock reaches the highest point in its trajectory, where it momentarily stops and changes direction. From that point, the rock will accelerate downward, gaining speed as it falls back to the ground. However, the time spent traveling upward and the time spent traveling downward will not be the same, since the upward portion of the trajectory will be slower due to gravity slowing the rock's ascent. This means that the rock thrown upward will have a lower speed when it hits the ground compared to the rock thrown downward.
On the other hand, the rock thrown downward will experience the force of gravity pulling it towards the ground, causing it to accelerate and gain speed as it falls. Since it is initially moving downward, it will not slow down until it hits the ground, meaning that it will have a higher velocity upon impact than the rock thrown upward.
Learn more about force of gravity here: https://brainly.com/question/2537310.
#SPJ11
A boy on a 1.9 kg skateboard initially at rest
tosses a(n) 8.0 kg jug of water in the forward
direction.
If the jug has a speed of 2.7 m/s relative to
the ground and the boy and skateboard move
in the opposite direction at 0.65 m/s, find the
boy’s mass.
Answer in units of kg.
Answer:
Approximately [tex]31.3\; {\rm kg}[/tex]. (Assuming the friction between the skateboard and the ground is negligible.)
Explanation:
The momentum [tex]p[/tex] of an object of [tex]m[/tex] and velocity [tex]v[/tex] is:
[tex]p = m\, v[/tex].
When the boy tossed the jug of water, the change in the momentum of the jug would be:
[tex]\Delta p(\text{jug}) = m(\text{jug}) \, (v(\text{jug}) - u(\text{jug}))[/tex], where:
[tex]m(\text{jug}) = 8.0\; {\rm kg}[/tex] is the mass of the jug;[tex]v(\text{jug}) = 2.7\; {\rm m\cdot s^{-1}}[/tex] is the velocity of the jug after the toss;[tex]u(\text{jug}) = 0\; {\rm m\cdot s^{-1}}[/tex] is the initial velocity of the jug, which was at rest before the toss.Hence:
[tex]\begin{aligned}\Delta p(\text{jug}) &= m(\text{jug}) \, (v(\text{jug}) - u(\text{jug})) \\ &= (8.0)\, (2.7 - 0)\; {\rm kg\cdot m\cdot s^{-1}} \\ &= 21.6\; {\rm kg\cdot m\cdot s^{-1}}\end{aligned}[/tex].
Similarly, the change in the momentum of the skateboard would be:
[tex]\Delta p(\text{board}) = m(\text{board}) \, (v(\text{board}) - u(\text{board}))[/tex], where:
[tex]m(\text{board}) = 1.9\; {\rm kg}[/tex] is the mass of the board;[tex]v(\text{board}) =(-0.65)\; {\rm m\cdot s^{-1}}[/tex] is the velocity of the board after the toss;[tex]u(\text{board}) = 0\; {\rm m\cdot s^{-1}}[/tex] is the initial velocity of the board.Note that the velocity of the board [tex]v(\text{board})\![/tex] after the toss is opposite to that of the jug. The sign of [tex]v(\text{board})[/tex] would be opposite to that of [tex]v(\text{jug})[/tex]. Since [tex]v(\text{jug})\![/tex] is positive, the value of [tex]v(\text{board})\!\![/tex] should be negative.
[tex]\begin{aligned}\Delta p(\text{board}) &= m(\text{board}) \, (v(\text{board}) - u(\text{board})) \\ &= (1.9)\, ((-0.65)- 0)\; {\rm kg\cdot m\cdot s^{-1}} \\ &= (-1.235)\; {\rm kg\cdot m\cdot s^{-1}}\end{aligned}[/tex].
Let [tex]m(\text{boy})[/tex] denote the mass of the boy. The velocity of the boy was initially [tex]u(\text{boy}) = 0\; {\rm m\cdot s^{-1}}[/tex] and would become [tex]v(\text{boy}) =(-0.65)\; {\rm m\cdot s^{-1}}[/tex] after the toss. The change in the velocity of the boy would be:
[tex]\Delta p(\text{boy}) = m(\text{boy}) \, (v(\text{boy}) - u(\text{boy}))[/tex].
Under the assumptions, the total changes in the momentum of this system (the boy, the skateboard, and the jug) should be [tex]0[/tex]. Thus:
[tex]\Delta p(\text{boy}) + \Delta p(\text{boy}) + \Delta p(\text{jug}) = 0[/tex].
Rearrange and solve for the mass of the boy:
[tex]\Delta p(\text{boy}) = -\Delta p(\text{jug}) - \Delta p(\text{board})[/tex].
[tex]\begin{aligned} m(\text{boy}) &= \frac{-\Delta p(\text{jug}) - \Delta p(\text{board})}{v(\text{boy}) - u(\text{boy})} \\ &= \frac{-(21.6) - (-1.235)}{(-0.65) - 0}\; {\rm kg} \\ &\approx 31.3\; {\rm kg}\end{aligned}[/tex].
a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet. the coefficients of static and kinetic friction are 0.6 and 0.4, respectively. the worker pushes with a force of 600 n. the frictional force exerted by the surface is
When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface on the crate is 588 N.
When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface can be calculated as follows:
The weight of the crate = m × g = 100 kg × 9.8 m/s² = 980 N
Force applied by the worker = F = 600 N
The force of friction acting on the crate is given by the following formula:
Ff = μF
Where, μ is the coefficient of friction, F is the normal force acting on the crate.
Notes: The normal force is equal and opposite to the weight of the crate. i.e., N = 980 N1. The frictional force exerted by the surface on the crate is the static frictional force initially. Hence, we use the coefficient of static friction for our calculation.
2. If the force applied by the worker is not enough to overcome the static frictional force, then the crate will not move and the frictional force will remain static friction.
3. Once the crate starts moving, the static friction will convert to kinetic friction. Hence, we will use the coefficient of kinetic friction if the force applied by the worker is greater than the force of static friction. Initially, the force applied by the worker is less than the force of static friction, hence the frictional force exerted on the crate will be the static frictional force.
Frictional force = Ff = μN
The normal force acting on the crate = Weight of the crate = 980 N
Frictional force =
Ff = μN
= 0.6 × 980 N
= 588 N
Therefore, the frictional force exerted by the surface on the crate is 588 N.
For more such questions on frictional force , Visit:
https://brainly.com/question/4618599
#SPJ11
how much work is done lifting a 15 pound object from the ground to the top of a 30 foot building if the cable used weighs 2 pounds per foot
The amount of work required to lift a 15 pound object from the ground to the top of a 30 foot building if the cable used weighs 2 pounds per foot is 1050 foot-pounds.
In order to solve the problem, we can use the formula W = Fd. where, W is the work done, F is the force required and d is the distance covered by the object while being lifted or moved.
So, we have to first calculate the force required to lift the object. Let us assume the force required is F, then
F = weight of object + weight of cable
F = 15 + 2 * 30
F = 75 pounds
Therefore, the force required to lift the object is 75 pounds. Now, we can calculate the work done as follows:
W= Fd
W = 75 * 14
W = 1050 foot-pounds
Therefore, the amount of work required to lift a 15 pound object from the ground to the top of a 30 foot building if the cable used weighs 2 pounds per foot is 1050 foot-pounds.
Learn more about work of move at https://brainly.com/question/28356414
#SPJ11
a piano wire of linear mass density 0.0050 kg/m is under a tension of 1350 n. what is the wave speed in this wire?
Answer:
v = sqrt(T/p) Here I
Explanation:
piano wire of a linear mask Party unit length that is 0.005 Kg. for Amanda, the tension in the wire is 1350 Newton. In the first part, we are calculating the speed of the wave. So wave speed is the square root of detention divided by mass per unit length. So the tension is 1350 Newton. This is 0.55. So the spirit of the wave is 5 1 9.6 m/s. This is the video of the need In the B part. The length of the string is one m. Now we are calculating the fundamental frequency. So fundamental frequency is one divided by two times under rooty divided by meal, so one divided by two lengths is one m. This is 135001 double 05. So the fundamental frequency is equal to. If you divide this then you will get 259.8 Hz. This is the fundamental frequency of the wire
Why is momentum not conserved in real life situations
Momentum is not always conserved in real-life situations because external forces can act on a system and change its momentum.
For example, when two cars collide, friction and air resistance can cause the momentum of the system to change. Similarly, when a ball is thrown in the air, gravity and air resistance act on it and cause its momentum to change. Other factors such as deformation, energy loss, and imperfect collisions can also cause momentum to be lost or gained. Therefore, while momentum is a useful concept in physics, it is important to consider the impact of external factors when analyzing real-world situations.
To know more about momentum, here
brainly.com/question/30677308
#SPJ4
Listed in the Item Bank are key terms and expressions, each of which is associated with one of the columns. Drag and drop each item into
the correct column. Order does not matter.
Conductor or Insulator
:: aluminum foil
:: plastic :: ocean water
:: air
:: wood
:: soil
:: foam
glass
Conductor:
Aluminum foil
Insulator:
Plastic
Air
Wood
Soil
Foam
Glass
What is Conductor?
A conductor is a material or substance that allows electric charge to flow freely through it, offering little or no resistance to the flow of an electric current. Common conductors include metals such as copper, silver, and gold.
A conductor is a material or substance that allows electrical current to flow freely through it. This is due to the presence of free electrons that can move easily through the material when an electric field is applied. Common conductors include metals such as copper, silver, and aluminum.
In contrast, an insulator is a material or substance that does not allow electrical current to flow through it easily. Insulators have very few free electrons and resist the flow of electric current. Common insulators include rubber, plastic, glass, and air.
Learn more about Conductor from given link
https://brainly.com/question/24154868
#SPJ1
a long, straight wire carries a current of 8.60 a. an electron is traveling in the vicinity of the wire. at the instant when the electron is 4.50 cm from the wire and traveling at a speed of 6.00 * 104 m>s directly toward the wire, what are the magnitude and direction (relative to the direction of the current) of the force that the magnetic field of the current exerts on the electron?
The magnitude and direction of the force that the magnetic field of the current exerts on the electron in a a long, straight wire is 1.96 x 10⁻¹⁸ N and direction of the force is opposite to the direction of the current.
The magnetic field of the current exerts a force on the electron of magnitude 6.072 x 10⁻¹³ N in a direction that is opposite to the direction of the current.
where
Current, I = 8.60 A
Distance of electron from wire, r = 4.50 cm = 0.045 m
Velocity of electron, v = 6.00 x 10^4 m/s
The force on the electron due to magnetic field of current-carrying wire is given by:
F = (μ * I * q) / (2 * π * r)
where μ is the magnetic permeability of free space and is equal to 4π x 10⁻⁷ Tm/A,
q is the charge of electron and is equal to -1.6 x 10⁻¹⁹ C, and
r is the distance between the electron and the wire.
Substituting the values, we get:
F = (4π x 10⁻⁷ Tm/A) * (8.60 A) * (-1.6 x 10⁻¹⁹ C) / (2 * π * 0.045 m)
F = -1.96 x 10⁻¹⁸ N.
The negative sign indicates that the direction of force is opposite to the direction of the current.
So, the magnitude of the force exerted by the magnetic field on the electron is 1.96 x 10⁻¹⁸ N, and the direction of the force is opposite to the direction of the current.
To practice more questions about the 'magnetic field':
https://brainly.com/question/26257705
#SPJ11
at a particular instant, a hot air balloon is 210 m in the air and descending at a constant speed of 3.5 m/s. at this exact instant, a girl throws a ball horizontally, relative to herself, with an initial speed of 21 m/s. when she lands, where will she find the ball? ignore air resistance. (find the distance, in meters, from the girl to the ball.)
The ball which is thrown with a speed of 21 m/s, travels a distance of 129.99 m in the horizontal direction.
Therefore, the vertical component of the ball's motion will be determined by the force of gravity and the initial vertical speed of the balloon.
We can use the following kinematic equation to determine how long it takes for the ball to fall to the ground:
h = ut + 1/2 * g * t^2
where h is the initial height of the ball (equal to the height of the balloon which is 210 m).
u is the initial velocity of the ball in the vertical direction which is 3.5 m/s.
g is the acceleration due to gravity (approximately 9.8 m/s^2),
and t is the time it takes for the ball to fall to the ground.
Plugging in the values we know, we get:
210 = 3.5 * t + 1/2 * 9.8 * t^2
4.9 t^2 + 3.5 t - 210 = 0
t = 6.19 seconds
Now we can use the time it takes for the ball to fall to the ground to determine how far it travels horizontally, given its initial horizontal velocity of 21 m/s. We can use the following equation:
d = v * t
where d is the horizontal distance traveled by the ball, v is its initial horizontal velocity, and t is the time it takes to fall to the ground (which we just calculated).
Plugging in the values we know, we get:
d = 21 * 6.19
d ≈ 129.99 meters
Therefore, the girl will find the ball approximately at a distance of 129.99 meters away from her when she lands after throwing the ball horizontally.
Learn more about the kinematic equation:
https://brainly.com/question/28712225
#SPJ11
europa, one of the moons of jupiter, was discovered by galileo in 1610. europa has a circular orbit of radius 6.708 105 km and period 3.551 days. find the mass of jupiter.
Therefore, the mass of Jupiter is approximately 1.898 × 1027 kg.
The mass of Jupiter can be calculated using the equation M = (4π2 r3)/(G P2), where M is the mass of Jupiter, r is the orbital radius of Europa (6.708 105 km), G is the gravitational constant (6.674 × 10-11 m3 kg-1 s-2), and P is the orbital period of Europa (3.551 days).
The circular orbit of Europa is given as, r = 6.708 × 105 km. The period of Europa is given as, T = 3.551 days are supposed to calculate the mass of Jupiter. In order to calculate the mass of Jupiter, we need to use Kepler's 3rd law. Kepler's 3rd law is given as, T2 = (4π2/GM) × r3 where T is the period of orbit, G is the gravitational constant, M is the mass of the planet, and r is the radius of the orbit.
By rearranging the above formula we get, M = (4π2r3) / (GT2)Substituting the given values, we get, M = (4π2 × (6.708 × 105)3) / ((6.67430 × 10-11) × (3.551 × 24 × 60 × 60)2) ≈ 1.898 × 1027 kg. Therefore, the mass of Jupiter is approximately 1.898 × 1027 kg.
You can read more about Jupiter at https://brainly.com/question/2715802#:
#SPJ11
what is the term for an orbit that electrons occupy at a fixed distance from the nucleus; designated 1, 2, 3, 4 ...? group of answer choices energy level orbital shell subshell none of the above
The term for an orbit that electrons occupy at a fixed distance from the nucleus is called an energy level.
What are energy levels?Electrons occupy specific energy levels in an atom, which are determined by the amount of energy required to move an electron from its present energy level to the next higher energy level. The energy levels are designated by a number, which ranges from one to seven. The lowest energy level is one, and the highest energy level is seven.
Electrons in the first energy level are the closest to the nucleus, while electrons in the seventh energy level are the farthest away.
Learn more about energy levels here: https://brainly.com/question/14287666.
#SPJ11
solar energy is also known as . group of answer choices convection longwave energy power conduction insolation
The correct answer is that solar energy is also known as isolation.
Solar energy, also known as insolation, is energy that is harnessed from the sun's rays. It is the most direct form of energy and can be used in a variety of ways, from heating and cooling to electricity generation. Solar energy is a renewable source of energy, meaning it is available in unlimited quantities and will never run out.
Solar energy is harnessed through various means, such as photovoltaic cells, thermal collectors, and concentrated solar power systems. Photovoltaic cells absorb the sun's energy and convert it into electricity, while thermal collectors use the sun's heat to provide hot water and air for heating. Concentrated solar power systems use mirrors to concentrate the sun's energy and produce electricity.
Solar energy is an efficient and clean source of energy, with minimal environmental impact. It does not produce any harmful emissions, making it a much more eco-friendly energy source than fossil fuels. Solar energy can also be used to power small devices, such as calculators and flashlights, making it a versatile energy source.
Therefore, the correct answer is isolation.
To know more about solar energy, refer here:
https://brainly.com/question/9704099#
#SPJ4
Explain how a book can have energy even if it’s not moving.
Even though a book appears to be stationary and not moving, it nevertheless contains energy in the form of potential energy, thermal energy, electromagnetic energy, and gravitational potential energy.
Energy is a system's ability to accomplish work or produce change. Even though a book appears to be motionless and not moving, it nonetheless contains energy in numerous ways.
The book has potential energy inside its molecular connections. Because of the arrangement of atoms inside their molecules, the paper and ink used in the book possess potential energy.
This energy may be released by chemical processes like combustion, which turn potential energy into other types of energy like heat and light.
The book also possesses thermal energy, which is the energy of its constituent molecules as a result of their motion and temperature.
The energy of the molecules within the book determines the temperature of the book, and this energy may be transmitted to other things or turned into other kinds of energy via numerous processes.
The book might potentially contain electromagnetic energy, which is the energy released by its constituent atoms and molecules as a result of electromagnetic interactions.
Depending on the state of the book and the energy of its constituent particles, this energy can emerge in a variety of ways, such as visible light or radio waves.
Lastly, due to its position inside a gravitational field, the book may have gravitational potential energy. As the book falls or is moved, this energy can be turned into other types of energy, such as kinetic energy.
For more such questions on energy, click on:
https://brainly.com/question/13881533
#SPJ11
A concave lens is shown here. According to the model, a lens disperses rays after passing through it. Which item below most likely uses a concave lens to perform its typical function?
The item that most likely uses a concave lens to perform its typical function is a concave lens .
What is a concave lens?A concave lens is a lens that is thinner at the center and thicker at the edges, causing it to diverge parallel rays of light.
How is a concave lens used in a camera?A concave lens is used in a camera to allow the photographer to adjust the focus of the camera by moving the lens closer to or farther away from the film or sensor. When the lens is moved closer to the film or sensor, it increases the distance between the lens and the object being photographed, causing the image to appear larger and bringing objects into focus that were previously blurry.
Learn more about concave lens here:
https://brainly.com/question/2919483
#SPJ9
an electron is each placed at rest in an electric field of 490 n/c. calculate the speed, mega m/s, 53.0 ns after being released.
The final speed of the electron placed at rest in an electric field of 490 N/C, after being released is -4.558 mega m/s.
Electric field = E = 490 N/C
The force acting on an electron in the electric field is:
F = qE, where q is the charge of the electron and E is the electric field strength.
q = -1.6 x 10⁻¹⁹ C (the negative sign indicates that the charge is negative).
F = qE = (-1.6 x 10⁻¹⁹ C) (490 N/C) = -7.84 x 10⁻¹⁷N.
The acceleration of the electron due to the electric field:
a = F/m = (-7.84 x 10⁻¹⁷N)/(9.11 x 10⁻³¹kg) = -8.6 x 10¹³ m/s².
According to the third law of motion, for every action, there is an equal and opposite reaction. This reaction force is the force of the electron on the source of the electric field, which is positive. Since the force is negative, the electron is accelerating in the opposite direction to the electric field direction.
The velocity can be found from the equation of motion, v = u + at
v = 0 + (-8.6 x 10¹³)(53.0 x 10⁻⁹) = 4.55 x 10⁶ m/s = 4.55 mega m/s.
The final speed of the electron is therefore -4.558 mega m/s.
To know more about speed, refer here:
https://brainly.com/question/17661499#
#SPJ4
TRUE/FALSE. when air masses of different densities collide, the less dense air mass is forced to rise through frontal lifting.
TRUE. When air masses of different densities collide, the less dense air mass is forced to rise through frontal lifting.
In meteorology, a front is a transition area between two air masses of different densities. The atmosphere's temperature, moisture content, and wind direction are all influenced by these air masses. The types of fronts are warm, cold, stationary, and occluded fronts. The front types are determined by the characteristics of the air masses and the direction of their movement. The types of the front are Warm front: When a warm air mass replaces a cold air mass, it is called a warm front. Warm fronts typically move more slowly than cold fronts. Cold front: A cold front happens when a cold air mass replaces a warm air mass. They have steeper pressure gradients than warm fronts, and they travel faster. Rain, thunderstorms, and cold temperatures are all common with this type of front. Stationary front: This occurs when two air masses meet and neither advances. There is a lot of rain along the stationary front. Occluded front: This is a type of front that develops when a cold front overtakes a warm front. When the cool air catches up to the warm air, an occluded front forms. The fronts can cause precipitation to fall.
Learn more about air masses at brainly.com/question/12089291
#SPJ11
a material has temperature coefficient of resistance (alpha) of 3.9 x 10^-3. if the material has a resistance of 23 ohms at a temperature of 20 c, what is the resistance of this material at a temperature of 50 c?
The resistance of the material at a temperature of 50°C is approximately 25.791 Ω.
We can use the formula for temperature dependence of resistance to solve this problem:
R2 = R1 [1 + α(T2 - T1)]
where R1 is the resistance at temperature T1, R2 is the resistance at temperature T2, and α is the temperature coefficient of resistance.
Plugging in the given values, we get:
R2 = 23 Ω [1 + (3.9 x 10⁻³/°C)(50°C - 20°C)]
Simplifying, we get:
R2 = 23 Ω [1 + (3.9 x 10^-3/°C)(30°C)]
R2 = 23 Ω [1 + 0.117]
R2 = 23 Ω [1.117]
R2 = 25.791 Ω
Therefore, the resistance of the material is approximately 25.791 Ω.
Learn more about Resistance:
#SPJ11
In the formula v = f X, what measurement is used for the frequency of the wavelength?
v = fλ links the velocity, frequency, and wavelength of a wave and is used to compute one of these parameters if the other two are known.
What unit of measurement is the wavelength's frequency?The wavelength formula shows the wavelength in metres. The v represents wave velocity and is measured in metres per second (mps). In addition, the letter "f" stands for frequency, which is expressed in hertz (Hz).
Which of the following best describes the wavelength measuring unit?The term wavelength implies that it measures length. Its measurements are often expressed in length measurements or metric units. In other words, wavelengths can be expressed in their SI units, metres.
To know more about frequency visit:-
https://brainly.com/question/12053539
#SPJ1
two identical carts, both of mass 0.5 kg are moving towards each other, each with a speed of 1.5 m/s. after they collide, what will be their velocities?
After the collision, the first cart moves to the left with a velocity of -1.5 m/s and the second cart moves to the right with a velocity of 1.5 m/s.
The velocities of the two carts after collision can be determined using the conservation of momentum principle. Momentum is defined as the product of an object's mass and velocity. Given,Mass of each cart, m = 0.5 kg, Initial velocity of each cart, u = 1.5 m/s, Initial momentum of each cart, p = mu.
After collision, velocity of the carts = v. Using the law of conservation of momentum;
mu + mu = mv + mv⇒ 2mu = 2mv⇒ u = v
Momentum before collision = Momentum after collision (conservation of momentum)
∴ 0.5 × 1.5 + 0.5 × (-1.5) = 0.5v1 + 0.5v2
On solving, we get,v1 = -1.5 m/sv2 = 1.5 m/s
Therefore after the collision, the first cart moves to the left with a velocity of -1.5 m/s and the second cart moves to the right with a velocity of 1.5 m/s.
More on velocity: https://brainly.com/question/30470329
#SPJ11