A. praised
B. scolded
C. rewarded
14. Reicon's parents admonished him for breaking their antique collection,
D. silenced
15. I am an advocate of anti-corruption movement in the country.
D. supporter
C. enemy
DirectioRead the statements below. Using context clues, identify the meaning
A. opponent
B. primer
highlighted words.
16. The hotel abolishes its rice-all-you-can policy to avoid wastage of food.
b. removes
d. proposes
A. continues
17. The country has a very tropical climate where it only has dry and wet
seasons similar to other countries in Southeast Asia
a. humid
b. cold
d. normal
-
c. comfortable
d. collected
a. new
c. outdated
18. The obsolete books and other references in the library resulted to the
removal in the shelves and inventory.
b. old
19. Beverages, such as juices, milk, beers and sodas, have increased in
,
due to low supply and importation issues.
a. drinks b. food
d. pastas
20. The luxurious life of my cousin in an exclusive subdivision in Ta
makes me inspired to dream and work hard for me to escape this unp
d.
a. ordinary b. fantastic
c. uncomfortable
c. bread








Help help me plis po summative test ko po ito plis help me

Answer:

two of the same instrument playing notes at slightly different frequencies

Explanation:

The correct answer is two of the same instrument playing notes at slightly different frequencies.

Frequency is the number of occurrences of a periodic event per unit of time. In the context of sound waves, frequency refers to the number of complete cycles of a sound wave that occur in one second and is measured in units of Hertz (Hz).

In this question,

A beat frequency occurs when two sound waves with slightly different frequencies interfere with each other, resulting in a periodic variation in the amplitude of the resulting wave. The beat frequency is equal to the difference in frequency between the two original sound waves.

When two of the same instrument play notes at slightly different frequencies, the sound waves produced by each instrument will have slightly different frequencies due to differences in tuning or other factors. When the two sound waves interfere with each other, they will produce a beat frequency equal to the difference between their frequencies. This beat frequency will be audible as a periodic variation in the loudness or intensity of the sound.

In the other statements, There will not be any beat frequency because the sound waves being produced have either the same frequency or very different frequencies, which do not interfere with each other in a way that produces beats.

Therefore, The statement two of the same instrument playing notes at slightly different frequencies is correct.

To learn more about the Doppler effect click:

https://brainly.com/question/3795295

#SPJ3

Answer:

192

Explanation:

Explanation:

Fgravity = G*(mass1*mass2)/D²

so, if you double one of the masses, what does that do to our equation ?

Fgravitynew = G*(2*mass1*mass2)/D²

due to the commutative property of multiplication

Fgravitynew = 2* G*(mass1*mass2)/D² = 2* Fgravity

so, the correct answer will be 2×45 = 90 units.

Answer:

Explanation:

An impulse results in a change of momentum

FΔt = mΔv

F = mΔv/Δt

F = 0.041(53 - 0) / 0.001

F = 2,173 N  27° above horizontal

A goal statement may involve how to develop physical skills in a given outdoor activity (e.g., soccer) in order to reach my maximum potential. It involves a statement of purpose.

A goal statement is a statement of purpose that describes long-term professional and/or motivational objectives.

A goal statement involves writing a statement about how to reach personal objectives, i.e., how to accomplish a career, job title, sports skills, educational training, etc.

An excellent statement of purpose should ideally be clear, specific, acceptable, time-bound and realistic.

Learn more in:

https://brainly.com/question/14607827

Answer:it’s C

Explanation:

by using graph of velocity vs. time for two objects, Item 4 and Item 5 statement makes an accurate comparison of the motions for objects. thus option C is correct.

velocity is the  rate of change of the position of the object with respect to  reference and it is complicated but velocity is basically speeding a particular object in a specific direction.

Velocity is a vector quantity which means both magnitude (speed) and direction are combinedly define define velocity. The SI unit of velocity is meter per second (ms-1) and the magnitude or the direction of velocity of a body changes leads to acceleration.

Speed and velocity are the two closest term but the major difference between speed and velocity is that speed gives us an idea that the object with the faster rate of movement r where as  velocity  speed up as well as  tells us the direction of the body

For more details velocity, visit

brainly.com/question/28738284

#SPJ2

Answer:

The answer is ciliary body and focus the pupil. In addition, the ciliary body is a portion of the eye that contains the ciliary muscle that reins the shape of the lens and the ciliary epithelium that yields the aqueous humor. The ciliary body is a share of the uvea which is the layer of tissue that transports oxygen and nutrients to the eye nerves while the pupil is a hole positioned in the midpoint of the iris of the eye that permits light to foray the retina. It looks black since light rays incoming the pupil are moreover engrossed by the tissues in the eye openly or engrossed after diffuse reflections in the eye that typically miss leaving the fine pupil

Explanation:

Answer:the eye has many parts that must work together in order to produce clear vision

Explanation: correct on my test

Answer:

im here\

Explanation:

Answer:

3

Explanation:

state of matter are solid

liquid and

gases

Answer:

In 1924 Louis de Broglie introduced the idea that particles, such as electrons, could be described not only as particles but also as waves. This was substantiated by the way streams of electrons were reflected against crystals and spread through thin metal foils.

Explanation:

I know I probably didn't answer your question, I just used all of my knowledge that I learned about Louie De Broglie. Hope it helps!

Answer:

Albert Einstein WAS a very well known Theoretical physicist

The USA claims he did not ever get his hands directly on an atomic bomb but in fact, other country textbooks like in Germany say he did.

Explanation:

A fun fact is that he was hired by the United States to make the Atomic bomb. Albert Einstein was a german yet many believed him to be a Smart American, they were wrong.

I think static is the correct answer

Answer:

Explanation:

1)  average velocity is

v = (21 + 39)/2 = 30m m/s

d = vt 30(4.1) = 123 = 120 m

2)  d = ½gt²

d = ½(9.8)(4.1²)

d = 82.369 = 82 m

when rounding to the two significant digits of the question numerals.

Answer:

it's ahfdfhhh hhgfdjjjjuyggffdddcff

Answer:

[tex]1.74\times10^3 kg; 100m[/tex]

Explanation:

Step a: mass of the car. Let's grab the definition of kinetic energy: [tex]K= \frac12 mv^2[/tex]. We have K, we have v (which we should convert in meters per second, dividing by 3.6) to get:[tex]4.22\times10^5 = \frac12m(22.03)^2 \rightarrow m= 2\times4.22 / 495.22 \times 10^5 = 1.74 \times 10^3 kg[/tex]

Point a is done.

Now for the (b)reaking part. (I'm sorry, it's an horrible joke, but I couldn't resist)

In theory we have the mass, we have the force, so we could find the acceleration, find how long it takes to slow down, and then find the distance traveled. Too long. Let's do things more easily: when the car slows down to 56 km/h it will have a different kinetic energy. The difference in kinetic energy is the work done by the breaking force ofer the slowing distance.

[tex]K_f-K_i=W[/tex] A quick note on signs: if you look carefully the final kinetic energy will be less than the initial value, thus the work will be negative: it means it's correct, since the work is against the motion, slowing it down. Let's get calculating, first by converting 56 kmh in m/s (15,56 m/s), then finding the final kinetic energy:

[tex]K_f =\frac12 (1.74\times10^3) (15.56)^2 =2.11 \times 10^5 J[/tex]

The difference will be the work done by the force, or

[tex](2.11 - 4.22) \times 10^5 = \vec F\cdot \vec x=Fx[/tex] where  we are assuming that force and displacement have the same line of actions to simplify the dot product.

[tex]2.11\times 10^5 = 2100x = 1.00\times 10^2 m[/tex]

Answer:

Overcurrents

Circuit breakers ("fuses" back in the day) are supposed to trigger when you are requesting past it more power (thus more current, since the tension is fixed and power is the product of voltsge times current). So whoever made that part of the grid did not foresee that many appliances.

Another option could be a short circuit somehwere but I think it is unlikely since the breaker would not trigger only when all three loads are powered on.

The elevation at the top of the hill is 1,653.85 m.

The given parameters;

The elevation at the top of the hill is calculated as follows;

[tex]P.E = mg\Delta h\\\\P.E = mg(h_2 -h_1)\\\\h_2 -h_1 = \frac{P.E}{mg} \\\\h_2 = \frac{P.E}{mg} + h_1\\\\h_2 = \frac{9.2 \times 10^5 }{72 \times 9.8} \ + \ 350 \ m\\\\h_2 = 1,653.85 \ m[/tex]

Thus, the elevation at the top of the hill is 1,653.85 m.

Learn more here:https://brainly.com/question/19768887

The sun is not a burning fire.

It's much much much hotter than that.

The sun's energy is the result of continuous nuclear fusion in it's core. We know how to do that on Earth, but the only thing we've been able to use it for so far is hydrogen bombs and other thermonuclear weapons.

Answer:

A

Explanation:

Down the hill, the net force increases if she pushes more forward.

Answer:

its a im just did the test

Explanation:

The elevation at the top of the hill is 1,653.85 m.

The given parameters;

The elevation at the top of the hill is calculated as follows;

[tex]P.E = mg\Delta h\\\\P.E = mg(h_2 -h_1)\\\\h_2 -h_1 = \frac{P.E}{mg} \\\\h_2 = \frac{P.E}{mg} + h_1\\\\h_2 = \frac{9.2 \times 10^5 }{72 \times 9.8} \ + \ 350 \ m\\\\h_2 = 1,653.85 \ m[/tex]

Thus, the elevation at the top of the hill is 1,653.85 m.

Learn more here:https://brainly.com/question/24515193

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

According to above question ~

Let's find the charge (q) by using formula ~

Hence, 12 coulombs of charge flow past any point in the wire in 3 seconds

Answer:

Explanation:

F = ma

F = 2.60(14.0)

F = 36.4 N

Answer:

Explanation:

Δx means a change in the magnitude of the x variable, often used in reference to a number line on the horizontal axis of a plot.

Answer: Contagion theory states that crowds cause people to act in a certain way; convergence theory says the opposite, claiming that people who wish to act in a certain way come together to form crowds.

Explanation: Its C

a. Assuming all energy involved is conserved, at the lowest point of the swing (which includes the moment the student grabs the rope), the student only has kinetic energy,

K = 1/2 m (3.5 m/s)²

and at the highest point of the swing, the student only has potential energy

P = mgh

The energies at the bottom and top of the swing must be equal, so

1/2 m (3.5 m/s)² = mgh

h = (3.5 m/s)² / (2g)

h = 0.625 m ≈ 63 cm

b. In part (a), we found the relationship

h = v²/(2g)

If we cut the speed v in half, we replace v in the equation above with v/2 :

h = (v/2)²/(2g)

and simplifying this gives

h = (v²/4)/(2g) = 1/4 • v²/(2g)

The factor of 1/4 tells you that reducing the speed by a factor of 1/2 reduces the height by a factor of 1/4. So he can swing as high as

1/4 (3.5 m/s)²/(2g) = 0.15625 m ≈ 16 cm

A.

The energy of the hot water is 482630400 J

Using Q = mcΔT where Q = energy of hot water, m = mass of water = ρV where ρ = density of water = 1000 kg/m³ and V = volume of water = 189 L = 0.189 m³,

c = specific heat capacity of water = 4200 J/kg-°C and ΔT = temperature change of water = T₂ - T₁ where T₂ = final temperature of water = 608 °C. If we assume the water was initially at 0°C, T₁ = 0 °C. So, the temperature change ΔT = 608 °C - 0 °C = 608 °C

Substituting the values of the variables into the  equation, we have

Q = mcΔT

Q = ρVcΔT

Q = 1000 kg/m³ × 0.189 m³ × 4200 J/kg-°C × 608 °C

Q = 482630400 J

So, the energy of the hot water is 482630400 J

B.

The elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.

Using the equation for gravitational potential energy ΔU = mgΔh where m = mass of object = 1000 kg, g = acceleration due to gravity = 9.8 m/s² and Δh = h - h' where h = required elevation and h' = zero level elevation = 0 m

Since the energy of the mass equal the energy of the hot water, ΔU = 482630400 J

So, ΔU = mgΔh

ΔU = mg(h - h')

making h subject of the formula, we have

h = h' + ΔU/mg

Substituting the values of the variables into the equation, we have

h = h' + ΔU/mg

h = 0 m + 482630400 J/(1000 kg × 9.8 m/s²)

h = 0 m + 482630400 J/(9800 kgm/s²)

h = 0 m + 49248 m

h = 49248 m

So, the elevation the mass would have to be raised from zero elevation relative to the reference environment for its exergy to equal that of the hot water is 49248 m.

Learn more about heat energy here:

https://brainly.com/question/11961649

The applied torque increases the angular speed by the application of an

angular acceleration.

Reasons:

The speed of the flywheel at the axis = 4 rev/s

The torque applied, T = 25 N·m

The time the torque is applied, t = 10 sec

Moment of inertia of the flywheel, I = 1.2 kg·m²

Required:

The speed at the end of the 10 seconds

Solution:

T = I·α

Where;

α = Angular acceleration

[tex]\displaystyle \alpha = \frac{T}{I}[/tex]

Therefore;

[tex]\displaystyle \alpha = \frac{24 \ N\cdot m}{1.2 \ kg \cdot m^2} = \mathbf{20\frac{5}{6} \ s^{-2}}[/tex]

The rotational speed, ω = ω₀ + α·t

Which gives;

[tex]\displaystyle \mathrm{The \ angular \ speed, } \ \omega = \frac{2 \cdot \pi \times 4 \ rad }{s} = \frac{8 \cdot \pi \ rad }{s}[/tex]

ω₀ = 8·π rad/s

Which gives;

[tex]\displaystyle \omega = \mathbf{8 \cdot \pi +2 \frac{5}{6} \times 10} = 233.47[/tex]

The speed of the wheel in revolution per second is therefore;

[tex]\displaystyle Speed \ in \ rev/s = \frac{8 \cdot \pi +2 \frac{5}{6} \times 10}{2\cdot \pi} \approx 37.16[/tex]

The speed after 10 seconds is approximately 37.16 rev/s.

Learn more here:

https://brainly.com/question/14548366

Answer:Convex mirrors are used because these mirrors provide a wider viewing angle than a plane mirror. This wide angle will help you getting more information/overview than what is happening at a narrow spot right behind the car if you use a plane mirror.

With a convex mirror you are for example able to detect an overtake (by the car behind you) early, if you for some reason wanted to turn left into another lane at the same moment the overtake took place - so you then can prevent a collision. Convex mirrors are simply covering a much larger area behind the car than plane mirrors do. And in the US, on the mirrors there is a text explaining that the vehicle behind you is closer than it appears - some kind of an idiot explanation in case some driver took the mirror image literally….because in the mirror image of a convex mirror, everything looks smaller and further away than they actually are.

Explanation: mark me as brainliest this is my best answer till now