The decay constant for the radioactive isotope in this problem is approximately 0.069[tex]h^-^1[/tex].
The activity of a radioactive isotope is the rate at which it decays, and is measured in becquerels (Bq). The activity of a sample of radioactive material decreases over time as the number of radioactive nuclei in the sample decreases due to radioactive decay.
The rate of radioactive decay is described by the first-order rate law, which relates the rate of decay to the number of radioactive nuclei present in the sample. The rate constant (λ) for radioactive decay is a characteristic property of the isotope and is related to its half-life (t1/2) by the equation:
t1/2 = ln(2)/λ
where ln(2) is the natural logarithm of 2, which is approximately 0.693.
To find the decay constant for the radioactive isotope in the given problem, we can use the following equation:
A = A0 e^(-λt)
where A is the activity at time t, A0 is the initial activity, and t is the time elapsed since the initial measurement.
Substituting the given values into this equation, we get:
80.2 Bq = 114 Bq e^(-λ(3 h 50 min))
Converting the time elapsed to hours, we get:
t = 3.833 h
Substituting this value, we get:
80.2 Bq = 114 Bq e^(-λ(3.833 h))
Dividing both sides by 114 Bq, we get:
0.704 = e^(-λ(3.833 h))
Taking the natural logarithm of both sides, we get:
ln(0.704) = -λ(3.833 h)
Solving for λ, we get:
λ = -ln(0.704)/3.833 h
λ ≈ 0.069 h^-1
for more such questions on radioactive
https://brainly.com/question/18640165
#SPJ11
draw the organic products formed in the following reaction. do not specify the stereochemistry of the product.
Chemistry's field of stereochemistry examines how atoms or groups are arranged spatially within molecules.
Stereoisomers are compounds having the same chemical formula, bond connectivity, and reactivity but a distinct atom configuration in the space. When exposed to optical light or a chiral environment, these compounds behave differently.
The study of relative spatial positioning or arrangement of the atoms that make up molecules is known as stereochemistry.
Studies in stereochemistry are centred on stereoisomers, which are species with the same chemical formula but a distinct arrangement of linked atoms in their three-dimensional space.
Thus, The stereochemistry of a molecule describes its three-dimensional form as well as the orientation of its neighbouring carbon atoms.
The carbon atom in a sugar molecule known as the anomeric carbon participates in the formation of the glycosidic bond between two monosaccharides. Additionally, a sugar molecule's -anomer or -anomer conformation is determined by the carbon atom.
Learn more about stereochemistry here
https://brainly.com/question/31229617
#SPJ11
Question 4 (1 point)
What is the temperature in °C of 6.83 g of Ne gas at 1.09 atm and that occupies
10.3 L?
Answer:
Explanation:
sorry no idea
How many molecules of hydrogen chloride would there be in 100.00 grams of this gas?
There would be approximately [tex]1.65 * 10^{24}[/tex] molecules of hydrogen chloride in 100.00 grams of the gas.
To determine the number of molecules of hydrogen chloride (HCl) in 100.00 grams of the gas, we first need to convert the mass of the gas to moles using its molar mass.
The molar mass of HCl is approximately 36.5 g/mol (1.01 g/mol for hydrogen + 35.45 g/mol for chlorine).
Number of moles of HCl = Mass of HCl / Molar mass of HCl
= 100.00 g / 36.5 g/mol
= 2.74 mol
Next, we can use Avogadro's number [tex](6.022 x 10x^{23} molecules/mol)[/tex] to convert the number of moles of HCl to the number of molecules of HCl:
Number of molecules of HCl = Number of moles of HCl x Avogadro's number
[tex]= 2.74 mol x 6.022 x 10^23 molecules/mol\\= 1.65 x 10^24 molecules\\[/tex]
Therefore, there would be approximately [tex]1.65 * 10^{24}[/tex] molecules of hydrogen chloride in 100.00 grams of the gas.
Learn more about molar mass, here:
https://brainly.com/question/22997914
#SPJ1
Please match the following metals with their medical use or biological function.
lithium
bismuth
cobalt
iron
-1. Lithium: Used in treating bipolar disorder as a mood stabilizer.
2. Bismuth: Found in medications to treat gastrointestinal issues, such as Pepto-Bismol.
3. Cobalt: Present in vitamin B12, essential for metabolism and red blood cell production.
4. Iron: Crucial for the production of hemoglobin, which carries oxygen in red blood cells.
Lithium is used as a mood stabilizer in the treatment of bipolar disorder.
- Bismuth is used as an antacid and to treat stomach ulcers.
- Cobalt is a component of vitamin B12, which is essential for the formation of red blood cells and the proper functioning of the nervous system.
- Iron is crucial for the production of hemoglobin in red blood cells, which carries oxygen throughout the body. It is also important for immune function and cognitive development.
these metals with their medical uses or biological functions:
1. Lithium: Used in treating bipolar disorder as a mood stabilizer.
2. Bismuth: Found in medications to treat gastrointestinal issues, such as Pepto-Bismol.
3. Cobalt: Present in vitamin B12, essential for metabolism and red blood cell production.
4. Iron: Crucial for the production of hemoglobin, which carries oxygen in red blood cells.
learn more about production of hemoglobin
https://brainly.com/question/31234291
#SPJ11
Select the correct form of the second-order integrated rate law for one reactant.
a.ln[A]t - ln[A]0 = kt
b.ln[A]0[A]t = kt
c.1[A]t - 1[A]0 = kt
The correct form of the second-order integrated rate law for one reactant is 1[A]t - 1[A]0 = kt.
The second-order integrated rate law relates the concentration of a reactant to time for a second-order reaction. The correct equation for the second-order integrated rate law for one reactant ([A]) is:
1/[A]t - 1/[A]0 = kt
Here, [A]t and [A]0 represent the reactant concentration at time t and initial time (0), respectively. k is the rate constant.
Option (a) represents the first-order integrated rate law, and option (b) is incorrect because the rate law should have a subtraction between the terms rather than a multiplication. Therefore, option (c) is the correct choice for the second-order integrated rate law for one reactant.
To know more about reactant, visit:
https://brainly.com/question/17096236
#SPJ11
Which type of molecule speeds up chemical reactions in living things?
Protein molecule acting as enzymes speeds up chemical reactions in living things.
Enzymes are proteins that help speed up metabolism, or the chemical reactions in our bodies. They build some substances and break others down. All living things have enzymes. The enzyme is not destroyed during the reaction and is used over and over.
Our bodies naturally produce enzymes. But enzymes are also in manufactured products and food.
Without enzymes, many of these reactions would not take place at a perceptible rate. Enzymes catalyze all aspects of cell metabolism.
Learn more about Proteins, here:
https://brainly.com/question/29776206
#SPJ1
Using the following information, explain how to calculate the mass of magnesium metal used in each trial. Calculate the actual yield, theoretical yield, percent yield, and average percent yield of magnesium oxide for each trial.Mass of empty crucible with lid: Trial 1 = 26.684 grams; Trial 2 = 26.692 gramsMass of Mg metal, crucible, and lid: Trial 1 = 27.093 grams; Trial 2 = 27.098 gramsMass of MgO, crucible, and lid: Trial 1 = 27.356 grams; Trial 2 = 27.357 grams
In Trials 1 and 2, respectively, 0.409 g and 0.406 g of magnesium metal were employed. In Trial 1 and Trial 2, the theoretical yield of MgO was 0.680 g and 0.675 g, respectively. In Trial 1 and Trial 2, the actual yield of MgO was 0.672 g and 0.665 g, respectively.
What is metal?Metals are substances that develop naturally beneath the Earth's surface. Most metals are shiny or glossy. Because they are inorganic, metals are composed of materials that have never been living.
To calculate the mass of magnesium metal used in each trial, we need to subtract the mass of the empty crucible with lid from the mass of the crucible, lid, and magnesium metal.
For Trial 1:
Mass of Mg metal = (Mass of Mg, crucible, and lid) - (Mass of empty crucible with lid)
Mass of Mg metal = 27.093 g - 26.684 g = 0.409 g
For Trial 2:
Mass of Mg metal = (Mass of Mg, crucible, and lid) - (Mass of empty crucible with lid)
Mass of Mg metal = 27.098 g - 26.692 g = 0.406 g
To calculate the theoretical yield of magnesium oxide, we need to use the balanced chemical equation for the reaction. Assuming that all the magnesium reacted with oxygen to form magnesium oxide, the theoretical yield can be calculated as follows:
Mg + 1/2 O₂ → MgO
Molar mass of Mg = 24.31 g/mol
Molar mass of MgO = 40.31 g/mol
For Trial 1:
Theoretical yield of MgO = (Mass of Mg metal used / Molar mass of Mg) x (Molar mass of MgO)
Theoretical yield of MgO = (0.409 g / 24.31 g/mol) x (40.31 g/mol) = 0.680 g
For Trial 2:
Theoretical yield of MgO = (Mass of Mg metal used / Molar mass of Mg) x (Molar mass of MgO)
Theoretical yield of MgO = (0.406 g / 24.31 g/mol) x (40.31 g/mol) = 0.675 g
The actual yield is the mass of the product (MgO) obtained experimentally.
For Trial 1:
Actual yield of MgO = Mass of MgO, crucible, and lid - Mass of empty crucible with lid
Actual yield of MgO = 27.356 g - 26.684 g = 0.672 g
For Trial 2:
Actual yield of MgO = Mass of MgO, crucible, and lid - Mass of empty crucible with lid
Actual yield of MgO = 27.357 g - 26.692 g = 0.665 g
The percent yield can be calculated using the following formula:
Percent yield = (Actual yield / Theoretical yield) x 100%
For Trial 1:
Percent yield of MgO = (0.672 g / 0.680 g) x 100% = 98.82%
For Trial 2:
Percent yield of MgO = (0.665 g / 0.675 g) x 100% = 98.52%
To calculate the average percent yield of MgO, we add the percent yields of both trials and divide by 2.
Average percent yield of MgO = (Percent yield of Trial 1 + Percent yield of Trial 2) / 2
Average percent yield of MgO = (98.82% + 98.52%) / 2 = 98.67%
Therefore, the mass of magnesium metal used in Trial 1 was 0.409 g, and in Trial 2 was 0.406 g. The theoretical yield of MgO was 0.680 g in Trial 1 and 0.675 g in Trial 2. The actual yield of MgO was 0.672 g in Trial 1 and 0.665 g in Trial 2.
Learn more about magnesium on:
https://brainly.com/question/16940312
#SPJ11
Given the following equations and H° values, determine the heat of reaction at 298 K for the reaction: C(s) + 2 H2(g) -> CH4(g)
H2 (g) + 1/2 02 (g) -> H20 (l)
CO2 (g) + 2 H20 (l) -> CH4 (g) + 2 02 (g)
C(s) + O2(g) -›CO2(g)
H kJ = - 393.5
H kJ = -285.8
H kJ = +890.3
The heat of reaction at 298 K for the reaction is -286.4 kJ. This can be calculated by adding the enthalpy of the reactants and subtracting the enthalpy of the products.
The enthalpy of the reactants is -393.5 kJ + -285.8 kJ = -679.3 kJ. The enthalpy of the products is 890.3 kJ.
Thus, the heat of reaction at 298 K is -679.3 kJ + 890.3 kJ = -286.4 kJ.
Learn more about heat of reaction at:
https://brainly.com/question/30464598
#SPJ1
Question 3 of 10
Which of the following best describes an empirical formula?
OA. A chemical formula that identifies the oxidation state of each
element
OB. A chemical formula that lists the percent composition of each
element
OC. A chemical formula that uses the numbers of atoms of each
element as they actually occur in a molecule
D. A chemical formula that shows the relative number of each type of
atom in a molecule, using the smallest possible ratio
A chemical formula that shows the relative number of each type of atom in a molecule, using the smallest possible ratio, best describes an empirical formula. The correct option is D
What is empirical formula ?The simplest whole number ratio of atoms in a chemical molecule is its empirical formula.
The empirical formula for glucose, for instance, is CH2O, which indicates that the proportion of carbon to hydrogen to oxygen atoms in glucose is 1:2:1. However, the empirical formula is a multiple of the true molecular formula for glucose, which is C6H12O6.
Learn more about empirical formula here : brainly.com/question/13058832
#SPJ1
Of the following binary liquid/vapor systems, which can be approximately modeled by raoult’s law? the table showing the characteristic properties of pure species may be useful. (check all that apply. ) (a) Benzene/toluene at 1(atm) (b) n-Hexane/n-heptane at 25 bar ? (c) Hydrogen/propane at 200 K ? (d) Iso-octane/n-octane at 100°C ? (e) Water/n-decane at 1 bar
The binary liquid/vapor systems that can be approximately modeled by Raoult's law are: (a) Benzene/toluene at 1 atm, and (d) Iso-octane/n-octane at 100°C.
To determine whether a binary liquid/vapor system can be approximately modeled by Raoult's law, we need to check if the interactions between the two components are similar. If the interactions are similar, then Raoult's law can be applied.
(a) Benzene/toluene at 1 atm: Both benzene and toluene have similar molecular structures and their intermolecular interactions are also similar. Hence, Raoult's law can be approximately applied to this system.
(b) n-Hexane/n-heptane at 25 bar: Hexane and heptane have different molecular structures, and their intermolecular interactions are different. Hence, Raoult's law may not be applicable to this system.
(c) Hydrogen/propane at 200 K: Hydrogen and propane have different molecular structures, and their intermolecular interactions are different. Hence, Raoult's law may not be applicable to this system.
(d) Iso-octane/n-octane at 100°C: Iso-octane and n-octane have similar molecular structures, and their intermolecular interactions are also similar. Hence, Raoult's law can be approximately applied to this system.
(e) Water/n-decane at 1 bar: Water and n-decane have different molecular structures, and their intermolecular interactions are different. Hence, Raoult's law may not be applicable to this system.
Therefore, the binary liquid/vapor systems that can be approximately modeled by Raoult's law are: (a) Benzene/toluene at 1 atm, and (d) Iso-octane/n-octane at 100°C.
Learn more about Raoult's law
https://brainly.com/question/28304759
#SPJ4
Consider the following equilibrium: 4 Ag(s) + O2(g) ⇌ 2 Ag2O(s). At 298 K, the equilibrium constant for this reaction is K = 8. 44 x 103. What is ΔG f° for Ag2O(s)?
−4. 86 kJ
More information is needed
−8. 44 kJ
−22. 4 kJ
−11. 2 kJ
The correct option is D, The answer of ΔG f° for Ag2O(s) is -11.2 kJ/mol.
ΔG = ΔG° + RT ln Q
At equilibrium, Q = K. Therefore:
ΔG° = -RT ln K
Plugging in the given values, we get:
ΔG° = -(8.314 J/(mol·K) × 298 K) × ln(8.44 × 10³)
ΔG° = -11.2 kJ/mol
Equilibrium refers to a state where the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentration of reactants or products. This means that the system is balanced and has reached a stable state.
Equilibrium is an important concept in chemical reactions, as it determines the extent to which a reaction will proceed. The equilibrium constant (Kc) is a quantitative measure of the position of the equilibrium and is used to calculate the concentrations of reactants and products at equilibrium. Le Chatelier's principle is a useful tool to predict how a system will respond to changes in temperature, pressure, or concentration. For example, if the concentration of reactants is increased, the system will shift towards the products to restore equilibrium.
To learn more about Equilibrium visit here:
brainly.com/question/30807709
#SPJ4
determine whether or not each combination of substances can be used to create a buffer. 0.05 m hno2, 0.05 m nano2
The determine whether or not a combination of substances can create a buffer, in this case, we have 0.05 M HNO2 and 0.05 M NaNO2. HNO2 is a weak acid and NaNO2 is its conjugate base.
The combination can create a buffer solution. The buffer capacity of a solution is highest when the concentrations of the weak acid and its conjugate base are equal. However, since the concentration of both substances is the same in this case, the buffer capacity of this solution is not maximized. To optimize the buffer capacity, we could adjust the concentrations of HNO2 and NaNO2, but in this case, it is not necessary. We can be confident that this combination of substances can create a buffer solution. In summary, the combination solution of 0.05 M HNO2 and 0.05 M NaNO2 can be used to create a buffer since HNO2 is a weak acid and NaNO2 is its conjugate base.
learn more about acid here.
https://brainly.com/question/14072179
#SPJ11
What is the name of the polyatomic ion ClO 2?
The name of the polyatomic ion ClO2 is chlorite. Chlorite is a negatively charged polyatomic ion with a chemical formula of ClO2-. It is composed of one chlorine atom and two oxygen atoms.
Chlorite is an intermediate in the oxidation of chlorine dioxide to chlorate and has several industrial uses, including water treatment and paper bleaching. In addition to its industrial applications, chlorite is also used in the laboratory as a reagent in analytical chemistry. When naming polyatomic ions, it is important to recognize the prefixes and suffixes used to indicate the number of atoms and their respective charges. For example, the -ite suffix is used to indicate a polyatomic ion with one less oxygen atom than the -ate ion, while the -ate suffix is used to indicate the most common polyatomic ion of a given element. Understanding the naming conventions for polyatomic ions is important for students of chemistry as it enables them to accurately communicate chemical formulas and reactions.
Learn more about Chlorite here
https://brainly.com/question/29104639
#SPJ11
ca(oh)2(s) precipitates when a 1.0 g sample of cac2(s) is added to 1.0 l of distilled water at room temperature. if a 0.064 g sample of cac2(s) (molar mass 64 g/mol) is used instead and all of it reacts, which of the following will occur and why? (the value of ksp for ca(oh)2 is 8.0 x 10-8.)
The reaction between CaC₂ and water produces 0.001 mol of Ca(OH)₂. The concentration of Ca(OH)₂ in the solution is 0.001 M, and the Ksp value is 1.0 x 10⁻⁹, indicating that the solution is not saturated, and no precipitation will occur.
The balanced equation for the reaction between CaC₂ and water is:
CaC₂(s) + 2H₂O(l) → Ca(OH)₂(s) + C₂H₂(g)
From the equation, 1 mole of CaC₂ reacts with 2 moles of water to form 1 mole of Ca(OH)₂.
The number of moles of CaC₂ used in the reaction is:
0.064 g CaC₂ x (1 mol CaC₂ / 64 g) = 0.001 mol CaC₂
Since 1 mole of CaC₂ produces 1 mole of Ca(OH)₂, the number of moles of Ca(OH)₂ produced is also 0.001 mol.
The initial volume of water is 1.0 L, which is equivalent to 1000 mL. Assuming that the volume of the solid CaC₂ is negligible compared to the volume of the water, the concentration of Ca(OH) in solution is:
[Ca(OH)₂] = (moles of Ca(OH)₂ produced) / (volume of water in liters)
[Ca(OH)₂] = 0.001 mol / 1.0 L = 0.001 M
The Ksp expression for Ca(OH)₂ is:
Ksp = [Ca²⁺][OH-]
Since Ca(OH)₂ is a strong base, it will dissociate completely in water to give Ca²⁺ and OH⁻ ions. Thus, the concentration of Ca²⁺+ and OH⁻ ions in the solution is equal to the concentration of Ca(OH)₂:
[Ca²⁺] = [OH⁻] = 0.001 M
Substituting the concentrations into the Ksp expression gives:
Ksp = (0.001 M)(0.001 M)² = 1.0 x 10⁻⁹
Since Ksp is greater than the given value of 8.0 x 10⁻⁸, the solution is not saturated with Ca(OH)₂ and no precipitation will occur. All of the Ca(OH)₂ will remain in solution.
To know more about the Ca(OH)₂ refer here :
https://brainly.com/question/15687677#
#SPJ11
which of the following would most likely reduce the concentration of ground-level ozone in the air of a city?
Reducing the number of vehicles on the road or promoting the use of public transportation would most likely reduce the concentration of ground-level ozone in the air of a city.
Ozone is a gas that typically exists in the stratosphere, shielding us from sun radiation. It can, however, form on the ground level in some situations.
Existence of nitrogen oxides and volatile organic compounds (VOCs), both produced in factories, industries, and transportation, as well as their reaction catalysed by heat and light, are prerequisites for this to occur.
Due to a lack of heat and light from the Sun on dark, chilly, and gloomy days, the creation of ozone will be reduced.
Additionally, this will allow nitrogen dioxide to accumulate for the same reason, increasing concentration.
Instead of being released into the atmosphere directly, ground-level ozone or "bad" ozone is produced via sunlight-induced chemical interactions between nitrogen oxides (NOx) and volatile organic compounds (VOC).
Learn more about ground-level ozone here
https://brainly.com/question/14804816
#SPJ11
Phosphoric acid
- Is corrosive since it has an unusually large Ka
- Is corrosive since it has an unusually small Ka
- Can cause pulmonary edema
- Is usually found as a solid
Phosphoric acid is corrosive since it has an unusually large Ka. It can cause severe damage to skin, eyes, and respiratory system upon contact. Inhaling phosphoric acid can also lead to pulmonary edema.
Phosphoric acid is usually found in a liquid form rather than a solid.
Is corrosive since it has an unusually large Ka. This means that it is a strong acid and can be harmful to tissues and materials due to its acidic nature.
Can cause pulmonary edema, which is a condition where fluid accumulates in the lungs and makes it difficult to breathe. This can happen if phosphoric acid is inhaled or ingested in large amounts.
Phosphoric acid is typically found as a liquid, not as a solid.
Learn more about Phosphoric acid
brainly.com/question/3700851
#SPJ11
You might need: Calculator
A 1.60 g tablet is found to contain 0.0133 mol of the amino acid glycine
(C₂H5NO₂). (The molar mass of C₂H5NO₂ is 75.07 g/mol.)
▸
What is the mass percent of C₂H5NO₂ in the tablet?
Write your answer using three significant figures.
%
A 1.60 g tablet is found to contain 0.0133 mol of the amino acid glycine (C₂H₅NO₂). (The molar mass of C₂H₅NO₂ is 75.07 g/mol.). So the mass percent of C₂H₅NO₂ in the tablet is 62.4%.
To find the mass percent, one needs to first determine the mass of C₂H₅NO₂ in the tablet. One can do this using the molar mass of C₂H₅NO₂, which is given as 75.07 g/mol in the question.
The molar mass of C₂H₅NO₂ is 75.07 g/mol, so the mass of 0.0133 mol of C₂H₅NO₂ is:
0.0133 mol x 75.07 g/mol = 0.998 g
Therefore, the mass percent of C₂H₅NO₂ in the tablet is:
(0.998 g / 1.60 g) x 100% = 62.4%
Learn more about the calculation of mass percentage here.
https://brainly.com/question/19236840
#SPJ1
1. if the pKa of HCHO2 is 3.74 and the pH of an HCHO2/NaCHO2 solution is 3.00, which of the following is TRUE?
a. [HCHO2] > [NaCHO2]
b. [HCHO2] < [NaCHO2]
c. [HCHO2] << [NaCHO2]
d. it is not possible to make a buffer of this ph from HCHO2 and NaCHO2.
e. [HCHO2] = [NaCHO2]
[HCHO₂] < [NaCHO₂]. This means that there are more NaCHO₂molecules present in the solution than HCHO₂ molecules, making option b the correct answer.
This is because when the pH of the solution is lower than the pKa of the weak acid (in this case, HCHO₂), the acid is in its protonated form (HCHO₂) and the conjugate base (NaCHO₂) is in its deprotonated form.
The formula "The molarity of products is divided by the molarity of reactants" is used to calculate the equilibrium constant of a process.
The equilibrium constant would be the ratio of the product concentration to the reactant concentration.
The amount of a solute per unit volume of solution, or the concentration of a chemical entity in a particular form of solution, has been determined by its molar concentration.
The formula "The molarity of products is divided by the molarity of reactants" is used to calculate the equilibrium constant of a process.
Additionally, it is possible to make a buffer from HCHO₂ and NaCHO₂ at this pH, as long as the ratio of the two is appropriate. The buffer capacity would be highest when the concentrations of HCHO₂ and NaCHO₂ are equal, making option e also a correct statement.
Learn more about equilibrium constant here
https://brainly.com/question/8732513
#SPJ11
How does the addition of water cause melting?
a. it heats the rocks
b. it decreases the pressure on the rocks
c. it increases the temperature while decreasing the pressure
d. it changes the location of the liquid-solid boundary
The addition of water causes melting by changing the location of the liquid-solid boundary (option d).
Melting is the process of a solid turning into a liquid due to an increase in temperature or a decrease in pressure. In the context of rocks, the presence of water lowers the temperature at which rocks melt.
Water molecules can break the bonds between the rock's mineral components, reducing the energy needed for the solid rock to transition into a liquid state. As a result, the rock melts at a lower temperature than it would without the presence of water.
The location of the liquid-solid boundary is the point where the solid rock and liquid rock (magma) are in equilibrium. By adding water, the temperature at which the rock will melt decreases, causing the liquid-solid boundary to shift to a different temperature and pressure.
In summary, the addition of water causes melting by changing the location of the liquid-solid boundary. This occurs because water lowers the melting temperature of rocks, allowing them to transition into a liquid state at lower temperatures than they would without the presence of water.
To learn more about liquid-solid boundary, refer:-
https://brainly.com/question/28026550?
#SPJ11
2072 Set D Q.No. 2 Which one has higher concentration and why? [1+1] a. 80 g/litre NaOH solution and 3 M NaOH solution. [1]
b. 5.3 g/litre Na2CO3 and N/10 Na2CO3 solution. [1]
Answer:
a. To compare the concentration of 80 g/litre NaOH solution and 3 M NaOH solution, we need to convert one of the concentrations to the other unit.
One mole of NaOH weighs 40 grams. So, to convert 80 g/litre NaOH to Molarity, we can divide 80 g/litre by 40 g/mol to get:
80 g/litre NaOH = 2 M NaOH
Therefore, 3 M NaOH has a higher concentration than 80 g/litre NaOH solution.
b. To compare the concentration of 5.3 g/litre Na2CO3 and N/10 Na2CO3 solution, we need to first understand what N/10 solution means.
N/10 Na2CO3 means that the solution contains 1/10th of the normal concentration of Na2CO3. The normal concentration of Na2CO3 is the molar concentration of Na2CO3 that corresponds to the formula weight of Na2CO3, which is 106 g/mol.
So, the normal concentration of Na2CO3 is 1 mol/L or 1 M Na2CO3.
Therefore, N/10 Na2CO3 solution has a concentration of 1/10 M Na2CO3.
Now, let's compare the two concentrations:
5.3 g/litre Na2CO3 = (5.3/106) M Na2CO3 = 0.05 M Na2CO3
Since 0.05 M Na2CO3 is greater than 1/10 M Na2CO3, the concentration of 5.3 g/litre Na2CO3 solution is higher than that of N/10 Na2CO3 solution.
Explanation:
Ethylene is the smallest member in the family of _____ containing a carbon-carbon _____ bond.
Ethylene is the smallest member in the family of hydrocarbons containing carbon-carbon double bond.
Ethylene is a simple organic compound with the chemical formula as C₂H₄ and it is a colorless, flammable gas with a sweet odor. Ethylene is an important industrial chemical that can be used in the production of plastics, synthetic rubber, and other chemicals.
Molecule of ethylene consists of two carbon atoms connected by double bond and each carbon atom is bonded to two hydrogen atoms. Double bond in ethylene is a type of covalent bond formed by the overlapping of two sp² hybrid orbitals on each of the carbon atom.
To know more about ethylene, refer
https://brainly.com/question/14797464
#SPJ11
which of the following statements is(are) true? (a) The entropy of the universe increases for any spontaneous process. (b) The entropy change of the system is equal and opposite that of the surroundings for any irreversible process. (c) The entropy of the system must increase in any spontaneous process. (a) The entropy change for an isothermal process depends on both the absolute temperature and the amount of heat reversibly transferred.
The statement (a) is true. The entropy of the universe always increases for any spontaneous process. This is known as the second law of thermodynamics, which states that in any spontaneous process, the total entropy of the system and its surroundings always increases.
The statement (b) is false. The entropy change of the system is not necessarily equal and opposite to that of the surroundings for any irreversible process. In fact, for any irreversible process, the entropy change of the surroundings is always greater than that of the system. The entropy of the system can either increase or decrease in a spontaneous process, but the total entropy of the system and its surroundings always increases. This is known as the second law of thermodynamics, which states that in any spontaneous process, the total entropy of the system and its surroundings always increases. Finally, the statement (d) is true. The entropy change for an isothermal process depends on both the absolute temperature and the amount of heat reversibly transferred. In an isothermal process, the temperature remains constant, and the entropy change is determined by the amount of heat transferred and the temperature of the system.
learn more about spontaneous here
https://brainly.com/question/30738654
#SPJ11
Consider the following equilibrium n2o2 (g) 2no2 now suppose a reaction vessel is filled with of dinitrogen tetroxide at. Answer the following questions about this system:
Under these conditions, will the pressure of N2O4 tend to rise or fall?
O rise O fall Is it possible to reverse this tendency by adding No2 ?
In other words, if you said the pressure of N2O4 will tend to rise, can that be changed to a tendency to fall by adding NO2 Similarly, if you said the pressure of N24 will tend to fall, can that be changed to a tendency to rise by adding NO2 ?
Yes
No
If you said the tendency can be reversed in the second question, calculate the minimum pressure of NO2 needed to reverse it. Round your answer to 2 significant digits. O atm
The minimum pressure of NO2 needed to reverse the tendency is equal to P/2, rounded to 2 significant digits.
Kc = {[tex]NO_2][/tex]2/ [[tex]N_2O_4[/tex]]
Kc = [x]2 / [P]
x = √(Kc * P)
Plugging in Kc = [[tex]NO_2[/tex]]2 / [[tex]N_2O_4[/tex]] = (2x)² / P = 4x²/P, and solving for x:
x = √(Kc * P) = √(4x²) = 2x
Equilibrium refers to a state where the rates of the forward and reverse reactions are equal, resulting in no net change in the concentration of reactants or products. This state is also known as dynamic equilibrium because the forward and reverse reactions continue to occur, but at the same rate, maintaining a stable concentration of reactants and products.
Equilibrium is governed by the principle of Le Chatelier's principle, which states that if a system at equilibrium is disturbed by a change in temperature, pressure, or concentration, the system will respond in a way to counteract the disturbance and re-establish equilibrium. For example, if the concentration of reactants in a system is increased, the system will shift towards the product side to use up the excess reactants and restore equilibrium.
To learn more about Equilibrium visit here:
brainly.com/question/23094521
#SPJ4
A gas is contained in a cylinder with a volume of 4.3 L at a temperature of 30.3oC and a pressure of 766.9 torr. The gas is then compressed to a volume of 0.38 L, and the temperature is raised to 839.0oC. What is the new pressure of the gas? Express your answer in atmospheres (atm)
The ideal gas law can be used to determine the gas's new pressure. According to the ideal gas law, pressure times volume equals the amount of a gas in moles times the global gas constant times the temperature.
Pressure = (number of moles of gas times the universal gas constant times the temperature) divided by volume is the new equation we may use to calculate pressure.
Since there are an equal amount of moles of gas in this situation, we can use the following formula to determine the new gas pressure: Pressure is equal to (4.3 L times 839.0oC) divided by (766.9 torr times 0.38 L). We obtain a new pressure of 118.6 atm by simplifying.
Learn more about pressure at:
https://brainly.com/question/12971272
#SPJ1
Physical symptoms when they stop use of a substance
-A severely negative physiological reaction to removal of a psychoactive substance, which can be alleviated by the same or a similar substance
When an individual stops using a substance, a severely negative physiological reaction to removal of a psychoactive substance, which can be alleviated by the same or a similar substance, they may experience physical symptoms known as withdrawal.
Withdrawal occurs due to a severely negative physiological reaction to the removal of a psychoactive substance, which can be alleviated by the same or a similar substance. The body and brain become dependent on the substance to function normally, and when the substance is removed, the person experiences discomfort as the body tries to readjust. Physical symptoms of withdrawal can vary depending on the substance used, the duration of use, and individual factors. Common symptoms may include headaches, nausea, sweating, tremors, insomnia, and muscle aches. In more severe cases, withdrawal symptoms can be life-threatening, such as seizures, hallucinations, and extreme agitation.
It is essential to seek professional help when attempting to stop the use of a substance, as some withdrawal symptoms may require medical supervision and intervention. Treatment options for managing withdrawal symptoms may include medications to alleviate specific symptoms, counseling and support groups to help with the emotional aspects of withdrawal, and, in some cases, substitution therapy with a less harmful substance to gradually reduce the body's dependence on the original substance. By addressing both the physical and psychological aspects of withdrawal, individuals can increase their chances of successfully stopping substance use and maintaining long-term recovery.
Learn more about psychoactive here:
https://brainly.com/question/20935120
#SPJ11
how many grams of solid lithium must be added to liquid water in order to obtain 15.0L of hydrogen gas at 89F and at 53psi with a volume of 38 gallons Li H2O LiOH H2
Here let us assume that the volume of hydrogen produced is at STP condition. At 273 K and 1 atm, 1 mole of any gas behaving ideally occupies a volume of 22.414 L. Here the mass of solid lithium is 9.36 g.
The volume occupied by one mole of a substance at a given temperature and pressure is called its molar volume at that temperature and pressure.
The number of moles of gas is:
Number of moles = V in L / 22.414 = 15.0 / 22.414 = 0.66 moles
The reaction equation is shown below;
2Li + 2H₂O → 2LiOH + H₂
1 mole of hydrogen gas is produced from 2 moles of Li;
0.66 moles of hydrogen will be produced from 0.66 x 2 = 1.33 moles
Mass of solid lithium = number of moles x molar mass
1.33 × 7 = 9.36 g
To know more about molar volume, visit;
https://brainly.com/question/4172228
#SPJ1
If an acid has a Ka value of 4. 31×10−10, what is the Kb of its conjugate base?
The Kb value of the conjugate base of the given acid is 2.32 × [tex]10^{-5}[/tex]
Ka × Kb = Kw
where Kw is the ion product constant for water, which is 1.0 × [tex]10^{-14}[/tex] at 25°C.
To find the Kb value of the conjugate base, we can rearrange this equation as follows:
Kb = Kw / Ka
Substituting the given Ka value of 4.31 × [tex]10^{-10}[/tex], we get:
Kb = (1.0 × [tex]10^{-14}[/tex]) / (4.31 × [tex]10^{-10}[/tex])
Kb = 2.32 × [tex]10^{-5}[/tex]
A conjugate base is a species that is formed when an acid donates a proton (H+) to a base. In other words, it is the species that remains after an acid has lost a hydrogen ion. For example, when hydrochloric acid (HCl) donates a hydrogen ion to water (H2O), the resulting species is the chloride ion (Cl-), which is the conjugate base of HCl.
The conjugate base of an acid is always one less proton (H+) than the original acid. For example, the conjugate base of sulfuric acid (H2SO4) is the hydrogen sulfate ion (HSO4-), which has lost one hydrogen ion. The strength of an acid is related to the strength of its conjugate base. Strong acids have weak conjugate bases, while weak acids have strong conjugate bases. This is because a strong acid readily donates its proton, leaving a stable and weakly basic conjugate base.
To learn more about Conjugate base visit here:
brainly.com/question/30225100
#SPJ4
can yall help me with this science question
Answer: There are few or no clouds.
Explanation: When there are little to no clouds, it generally signals the presence of a high-pressure system, which means that residents can expect fair weather and no precipitation. Certain clouds, such as low-level, short, cumulus clouds, indicate that fair weather is moving into the area
Drinking methanol can cause blindness and death, depending on the dosage. The causative agent is formaldehyde derived from methanol.
(a) Draw the balanced chemical reaction for the conversion of methanol to formaldehyde.
(b) Why would administering whiskey (ethanol) to a person poisoned with methanol be a good antidote?
(a) The balanced chemical reaction for the conversion of methanol (CH₃OH) to formaldehyde (HCHO) is as follows:
CH₃OH + 1/2 O₂ → HCHO + H₂O
In this reaction, methanol reacts with oxygen to produce formaldehyde and water.
(b) Administering whiskey (ethanol) to a person poisoned with methanol can be a good antidote because both methanol and ethanol are metabolized by the same enzyme, alcohol dehydrogenase. When ethanol is present, it competes with methanol for the enzyme, leading to a slower conversion of methanol to its toxic metabolite, formaldehyde.
This allows the body more time to eliminate methanol through the kidneys before it is converted into harmful substances, reducing the risk of severe poisoning, blindness, and death.
To know more about the methanol refer here :
https://brainly.com/question/24077457#
#SPJ11
Using Dalton's Law, oxygen and chlorine gas are mixed in a container with
partial pressures of 401 mmHg and 486 mmHg, respectively. What is the
total pressure inside the container (in atm)?
The total pressure inside the container is 1.17 atm.
The total pressure inside the container can be calculated using Dalton's Law, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas.
To solve the problem, we simply add the partial pressures of oxygen and chlorine gas to find the total pressure:
Total pressure = partial pressure of oxygen + partial pressure of chlorine
Total pressure = 401 mmHg + 486 mmHg
Total pressure = 887 mmHg
To convert mmHg to atm, we divide by the conversion factor of 760 mmHg/atm:
Total pressure = 887 mmHg / 760 mmHg/atm
Total pressure = 1.17 atm
As a result, the total pressure within the container is 1.17 atm.
To know more about the Pressure, here
https://brainly.com/question/23419864
#SPJ1