The theoretical probability of the spinner not landing on red is 0.875.
How to determine the theoretical probability of the spinner not landing on redThe total number of sections on the spinner is 8, out of which only one section is red. Therefore, the probability of the spinner landing on red is:
P(Red) = 1/8
The probability of the spinner not landing on red would be the probability of landing on any other section, which is:
P(Not Red) = 1 - P(Red) = 1 - 1/8 = 7/8
Therefore, the theoretical probability of the spinner not landing on red is 7/8 or 0.875 in decimal form.
So, the correct answer is: 0.875.
Learn more about probability at https://brainly.com/question/24756209
#SPJ1
Answer:
D
Step-by-step explanation:
Need help ASAP
there are 600 poetry books at the library.Of the poetry books,8.5 are for children.How many poetry books at the library are for children
The number of poetry books at the library that are for children is 510
How many poetry books at the library are for childrenfrom the question, we have the following parameters that can be used in our computation:
Books = 600
If 8.5/10 of the poetry books are for children, we can calculate the number of poetry books for children as follows:
Number of poetry books for children = (8.5/10) x 600
Number of poetry books for children = 510
Therefore, there are 510 poetry books at the library for children.
Read more about proportion at
https://brainly.com/question/870035
#SPJ1
For the function 8-(x-3)^2,
state the domain
The domain of the function 8 - [tex](x-3)^{2}[/tex] is R which is all the real numbers.
What is domain of a function?
The set or grouping of all potential values that may be used in the function is known as the domain.
We are given a function as 8 - [tex](x-3)^{2}[/tex].
Now, in order to find the domain, we need to find the values where the function is not defined for a value of x.
But, there is no such value for x where the function is not defined.
This means that all values of x give an output.
So, the domain is the set of all the real numbers.
Hence, the domain of the given function is R.
Learn more about domain of function from the given link:
https://brainly.com/question/1369616
#SPJ1
During a flood, there were 6000 acres of land under water. After 2 days, only 3375 acres of land were under water. Assume that the water receded at an exponential rate. Write a function to model this situation that has a B-value of 1.
where t is measured in days, and A(t) represents the amount of flooded land at time t. This function has a B-value of -0.3118.
To model the situation of the flood, we can use an exponential decay function, which represents the decreasing amount of flooded land over time. The function can be written as:
[tex]A(t) = A0 * e^{(-kt)}[/tex]
where A(t) is the amount of flooded land at time t, A0 is the initial amount of flooded land, k is a constant representing the rate of decay, and e is the mathematical constant approximately equal to 2.718.
To determine the value of k, we can use the given information that after 2 days, only 3375 acres of land were under water. Substituting t = 2 and A(t) = 3375 into the equation above, we get:
[tex]3375 = A0 * e^{(-2k)[/tex]
We also know that initially, there were 6000 acres of land under water. Substituting A0 = 6000 into the equation above, we get:
Dividing both sides by 6000, we get:
ln(0.5625) = -2k[tex]ln(0.5625) = -2k[/tex]
Taking the natural logarithm of both sides, we get:
[tex]ln(0.5625) = -2k[/tex]
Solving for k, we get:
[tex]k = -ln(0.5625)/2[/tex]
k ≈ 0.3118
Therefore, the function to model the situation of the flood is:
[tex]A(t) = 6000 * e^{(-0.3118t)}[/tex]
To learn more about function, visit
https://brainly.com/question/12431044
#SPJ1
rylie is a newly hired cybersecurity expert for a government agency. rylie used to work in the private sector. she has discovered that, whereas private sector companies often had confusing hierarchies for data classification, the government's classifications are well known and standardized. as part of her training, she is researching data that requires special authorization beyond normal classification. what is this type of data called? group of answer choices
Compartmentalized is the type of data that is discussed in the problem researched by an employee rylie who is a newly hired cybersecurity expert for a government agency and has working experience in the private sector.
Data classification is the way of organizing data into different categories that make it easy to retrieve, sort and store for future use. In simple words, compartmentalization means to separate into isolated compartments or categories. In data language, A nonhierarchical grouping of information used to control access to data more finely than with hierarchical security classification alone is called Compartmentalization. Now, we have a rylie who is a newly hired cybersecurity expert for a government agency. She has working experience in the private sector. On basis of her experience she has discovered that, the private sector companies often had confusing hierarchies for data classification as compared to the government's classifications which are well known and standardized. During her training, she is researching data that requires special authorization beyond normal classification. The data type that she researched and that is authorization beyond normal classification is called compartmentalized data.
For more information about data classification, visit :
https://brainly.com/question/30580761
#SPJ4
answer asap, 12 points !!!
Answer:
Step-by-step explanation:
domain is -infinity to positive infinity range is -3 to infinity. Increasing from -3 to infinity and decreasing from - infinity to -3 and it’s minimum
A charity needs to report its typical donations received. The following is a list of the donations from one week. A histogram is provided to display the data.
10, 11, 35, 39, 40, 42, 42, 45, 49, 49, 51, 51, 52, 53, 53, 54, 56, 59
A graph titled Donations to Charity in Dollars. The x-axis is labeled 10 to 19, 20 to 29, 30 to 39, 40 to 49, and 50 to 59. The y-axis is labeled Frequency. There is a shaded bar up to 2 above 10 to 19, up to 2 above 30 to 39, up to 6 above 40 to 49, and up to 8 above 50 to 59. There is no shaded bar above 20 to 29.
Which measure of variability should the charity use to accurately represent the data? Explain your answer.
The range of 13 is the most accurate to use, since the data is skewed.
The IQR of 49 is the most accurate to use to show that they need more money.
The range of 49 is the most accurate to use to show that they have plenty of money.
The IQR of 13 is the most accurate to use, since the data is skewed.
The range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.
what is statistics?
Statistics is a branch of mathematics that deals with collecting, analyzing, interpreting, presenting, and organizing data. It involves the study of methods for designing experiments and surveys, analyzing and interpreting data, and making decisions based on data. Statistics plays an important role in a wide range of fields, including science, social science, economics, finance, engineering, and many others. It is used to draw conclusions, make predictions, and inform decision-making by providing a quantitative and objective approach to understanding and analyzing data.
The most accurate measure of variability to use for this data set is the range of 49. The range is the difference between the highest and lowest values in the data set, which in this case is 59 - 10 = 49. The range provides a simple and straightforward measure of the spread of the data and is useful when the data is not too skewed.
While the data in this set is skewed, the range is still an appropriate measure of variability because there are no extreme outliers that would significantly affect the range. The IQR (interquartile range) is another measure of variability that is useful for skewed data, but in this case, it would not be the most appropriate choice because the data set is not divided into quartiles and the IQR would not provide additional information beyond what the range already shows.
Therefore, the range of 49 is the most appropriate measure of variability to use to represent the spread of donations received by the charity in this data set.
To learn more about statistics from the given link
https://brainly.com/question/29093686
#SPJ1
which of the following null hypothesis statistical tests require calculating degrees of freedom? group of answer choices all of the above two-sample t-test chi-squared one-sample t-test
The two null hypothesis that are correct answer are two-sample t-test and one-sample t-test.
Among the group of answer choices provided, the tests that require calculating degrees of freedom are the two-sample t-test and the one-sample t-test. Both of these tests belong to the t-test family and involve using degrees of freedom to determine the critical t-value.
In summary:
- Null hypothesis: The assumption that there is no significant difference between the sample and population or between two samples.
- T-test: A statistical test used to determine if there is a significant difference between the means of two groups or between a sample and population mean.
- Degrees of freedom: A value used in statistical tests that represents the number of independent values in a data set, which can affect the outcome of the test.
So answer is: two-sample t-test and one-sample t-test.
Learn more about null hypothesis here:
https://brainly.com/question/28920252
#SPJ11
The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-
sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also
requires degrees of freedom, but it is not a test for a null hypothesis.
The correct answer is: all of the above.
All these tests require calculating degrees of freedom:
1. Two-sample t-test:
Degrees of freedom are calculated using the formula (n1 + n2) - 2, where n1 and n2 are the sample sizes of the two
groups being compared.
2. Chi-squared test:
Degrees of freedom are calculated using the formula (rows - 1) * (columns - 1), where rows and columns represent the
number of categories in the data.
3. One-sample t-test:
Degrees of freedom are calculated using the formula n - 1, where n is the sample size.
The null hypothesis statistical tests that require calculating degrees of freedom are the two-sample t-test and the one-
sample t-test. The degrees of freedom are necessary to calculate the t-value for these tests. The chi-squared test also
requires degrees of freedom, but it is not a test for a null hypothesis.
for such more question on null hypothesis
https://brainly.com/question/4436370
#SPJ11
fractions to decimals
Answer: 1 is .4
2. is .6
3 is .5
4 is .375
5 is .18
6 is .71
7 is .16
8 is .66 repeating
9 is .91
and 10 is .25
Step-by-step explanation:
to get all these and fractions to decimals in the future just divide the numerator by the denominator in other words the top number by the bottom number
1): 0.4
2): 0.67 or 0.7
3): 0.5
4): 0.37 or 0.4
5): 0.18
6): 0.42 or 0.5
7): 0.17
8): 0.7
9): 0.97 or 1
10): 0.25
which statement is correct? group of answer choices assessment is only one part of the overall testing process. testing is only one part of the overall assessment process. testing integrates test information with information from other sources.
Testing is only one part of the overall assessment process.
What is evaluation in education?
Assessment is an ongoing process of gathering evidence of what each student actually knows, understands, and can do. A comprehensive evaluation approach includes a combination of formal and informal evaluation (formative, preliminary, and summative).
What is an assessment? Also what does it mean?
At the course level, assessments provide important data on the breadth and depth of student learning. Evaluation is more than scoring. It's about measuring student learning progress. Assessment is therefore defined as “the process of data gathering to better understand the strengths and weaknesses of a student's learning”.
Learn more about assessment
brainly.com/question/28046286
#SPJ1
in a sample of 307 pop music selections, the key was identified correctly in 245 of them. in a sample of 347 new-age selections, the key was identified correctly in 304 of them. can you conclude that the method is more accurate for new-age songs than for pop songs?
Solve this proportion 12/m = 18/9
Answer:
m = 6
Step-by-step explanation:
We have the proportion:
12/m = 18/9
To solve for m, we can cross-multiply the terms in the proportion:
12 × 9 = 18 × m
Simplifying both sides of the equation, we get:
108 = 18m
Dividing both sides by 18, we get:m = 6
Therefore, the solution to the proportion 12/m = 18/9 is m = 6.
Answer: m = 6
Step-by-step explanation:
First, we will rewrite this proportion:
[tex]\displaystyle \frac{12}{m} =\frac{18}{9}[/tex]
Next, we will cross-multiply:
12 * 9 = 18 * m
108 = 18m
Lastly, we will divide both sides of the equation by 18:
m = 6
We can also solve this proportion another way.
We know that 18/9 = 2, so 12/m must equal 2 as well.
12/6 = 2, so m = 6.
In triangle ∆ABC, m<A = 33°, m<C = 58°, and AB = 25 in. What is AC to the nearest tenth of an inch?
1. 16.1 in.
2. 38.9 in
3. 42 in.
4. 12 in.
The value of AC to the nearest tenth is 29.5
What is sine rule?The sine rule states that if a, b and c are the lengths of the sides of a triangle, and A, B and C are the angles in the triangle; with A opposite a, etc., then a/sinA=b/sinB=c/sinC.
Angle B = 180-(33+58)
= 180-91 = 89°
using sine rule
represent AC by x
x/ sin89 = 25/sin 58
xsin58 = 25sin89
0.848x = 0.9998×25
0.848x = 24.995
x = 24.995/0.848
x = 29.5( nearest tenth)
therefore the value of AC is 29.5.
learn more about sine rule from
https://brainly.com/question/20839703
#SPJ1
Find the surface area and width of a rectangular prism with height of 6 cm, length of 5 cm, and the
volume of 240 cm³.
Answer:
236 cm^2 and 8 cm
Step-by-step explanation:
width=w
240=6(5)(w)
w=8 cm
area=2[(6)(5)+(6)(8)+(5)(8)]
area=236 cm^2
in desperate need of help!! (i accidentally clicked the first answer)
Answer:
The answer is 28
Step-by-step explanation:
sin0=opp/hyp
let hyp be x
sin30=14/x
0.5x=14
divide both sides by 0.6
x=14/0.5
x=28
Jackie has $500 in a savings account.The interest rate is 5% per year and is not compounded. How much will she have in total in 1 year?
Answer:
$525
Step-by-step explanation:
Jackie starts with $500, and the interest rate is 5% per year.
This means that, after one year, Jackie will have accumulated 5% interest with the $500 she put into the savings account.
Now, we can find 5% of $500 by converting 5% to its fraction form, which is 5/100. 5% of a value means that you need to multiply the fraction (or decimal) by the said value. So, we have:
[tex]\frac{5}{100}[/tex] · 500 =
[tex]\frac{2500}{100}[/tex] =
25
Therefore, the amount of interest she has accumulated in one year is $25. Combined with the money in her savings account, she has $525, since $500 + $25 = $525.
in a(n) , the scale questions are divided into two parts equally and the resulting scores of both parts are correlated against one another.
The main topic is the split-half reliability test used in psychological research to assess the internal consistency of a scale.
How to test the psychological research?In psychological research, reliability is a crucial aspect of measuring constructs or attributes. One commonly used method for assessing the reliability of a scale is the split-half reliability test.
In this test, the scale questions are divided into two parts equally, and the resulting scores of both parts are correlated against one another.
For example, if a scale had 20 items, the items could be randomly split into two groups of 10 items each.
Scores are then calculated for each group, and the scores are correlated with each other to determine the degree of consistency between the two halves.
The correlation coefficient obtained from this analysis provides an estimate of the internal consistency of the scale.
A high correlation coefficient indicates a high level of internal consistency, indicating that the two halves of the scale are measuring the same construct or attribute.
Conversely, a low correlation coefficient suggests that the two halves of the scale are not measuring the same construct or attribute, and the scale may need to be revised or abandoned.
Overall, the split-half reliability test provides a quick and efficient method for evaluating the reliability of a scale.
However, it is important to note that this method does have some limitations, such as the possibility of unequal difficulty or discrimination of the items in each half of the scale.
Therefore, researchers often use other methods, such as Cronbach's alpha, in conjunction with the split-half reliability test to provide a more comprehensive assessment of the reliability of a scale
Learn more about reliability test
brainly.com/question/27873337
#SPJ11
Find the value of x .
J
30°
M
to
K
(2x - 30)°
[
The value of x in the Intersecting chords is 15
Finding the value of x .From the question, we have the following parameters that can be used in our computation:
Intersecting chords
The value of x is then calculated as
x = 1/2(30 - 2x + 30)
So, we have
2x = 30 - 2x + 30
Evaluate the like terms
4x = 60
Divide
x = 15
Hence, the value of x is 15
Read more about angles at
https://brainly.com/question/28293784
#SPJ1
A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:
f(d) = 7(1.06)d
Part A: When the biologist concluded her study, the radius of the algae was approximately 13.29 mm. What is a reasonable domain to plot the growth function? (4 points)
Part B: What does the y-intercept of the graph of the function f(d) represent? (2 points)
Part C: What is the average rate of change of the function f(d) from d = 4 to d = 11, and what does it represent? (4 points)
Part A: A reasonable domain to plot the growth function would be from d = 0 to d = 11.
Part B: The y-intercept of the graph of the function f(d) is 7
Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.
Domine and y-intercept of a function:
The domain of a function represents the set of input values for which the function is defined and can produce a meaningful output.
The y-intercept of a function represents the value of the function when the input is equal to zero.
The average rate of change of a function from x = a to x = b is given by the slope of the secant line passing through the points (a, f(a)) and (b, f(b)).
Here we have
A biologist is studying the growth of a particular species of algae. She writes the following equation to show the radius of the algae, f(d), in mm, after d days:
=> f(d) = 7(1.06)^d
Since it is given that the radius of the algae was approximately 13.29 mm when the biologist concluded her study, we can set f(d) = 13.29
=> 13.29 = [tex]7(1.06)^{d}[/tex]
=> ln(13.29/7) = d ln(1.06)
=> d = ln(13.29/7)/ln(1.06) ≈ 11
Therefore, A reasonable domain to plot the growth function would be from d = 0 to d = 11.
Part B: The y-intercept of the graph of the function f(d) represents the value of the function when d = 0.
Substituting d = 0 into the given equation, we get:
f(0) = 7(1.06)⁰ = 7
Therefore, The y-intercept of the graph of the function f(d) is 7
Part C: The average rate of change of the function f(d) from d = 4 to d = 11 is given by the slope of the secant line passing through the points (4, f(4)) and (11, f(11)). Using the given equation, we can evaluate f(4) and f(11):
f(4) = 7(1.06)⁴ ≈ 8.84
f(11) = 7(1.06)¹¹ ≈ 13.29
The slope of the second line passing through these two points is:
Slope = (f(11) - f(4))/(11 - 4) = [ 13.29 - 8.84]/7 = 0.64
Therefore,
The average rate of change of the function f(d) from d = 4 to d = 11 is approximately 0.64 mm/day.
Learn more about Functions at
https://brainly.com/question/24839787
#SPJ1
Joey deposits $6000 each into the two savings accounts described below. If he doesn’t make any other deposits or withdrawals, find the combined amount of accounts after 10 years.
Account 1
3.5% annual simple interest
Account 2
3.5% annual compound interest
The combined amount in both accounts after 10 years is $16,869.58
What is formula of simple interest and compound interest ?To solve the problem, we need to use the following formulas:
Simple Interest = Principal x Rate x Time
Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]
where:
Principal = the initial deposit
Rate = the interest rate (in decimal form)
Time = the number of years
n = the number of times interest is compounded per year
For Account 1:
Simple Interest = Principal x Rate x Time
= $6000 x 0.035 x 10
= $2100
The amount in Account 1 after 10 years will be the initial deposit plus the interest earned:
= $6000 + $2100
= $8100
For Account 2:
Since the interest is compounded annually, n = 1.
Compound Interest = [tex]Principal * (1 + Rate/ n)^{n * Time}[/tex]
= [tex]6000 *(1 + 0.035/1)^{1 * 10}\\= $6000 (1.035)^{10}\\= $8769.58[/tex]
After ten years, the amount in Account 2 will be $8769.58.
After ten years, the combined amount in both accounts will be:
$8100 minus $8769.58 equals $16869.58, resulting in a total of $16,869.58 in both accounts after ten years.
know more about simple interest visit:
https://brainly.com/question/25845758
#SPJ1
19.
Solve the problem.
2
Find the critical value XR corresponding to a sample size of 5 and a confidence
level of 98%.
(1 point)
O11.143
00.297
13.277
00.484
The critical value of the chi-square distribution corresponding to a sample size of 5 and a confidence level of 98% is given as follows:
0.297 and 13.277.
How to obtain the critical value?To obtain a critical value, we need three parameters, given as follows:
Distribution.Significance level.Degrees of freedom.Then, with the parameters, the critical value is found using a calculator.
The parameters for this problem are given as follows:
Chi-square distribution.1 - 0.98 = 0.02 significance level.5 - 1 = 4 degrees of freedom.Using a chi-square distribution calculator, the critical values are given as follows:
0.297 and 13.277.
More can be learned about the chi-square distribution at https://brainly.com/question/4543358
#SPJ1
Solve for x to make A||B.
A = x + 12
B = x + 48
X = [?]
Answer:
Step-by-step explanation:= x+48=180 ( linier pair )
= x=180-48
= x=132
= x+12=180 (liner pair)
= x=180-12
= x=168
Using trig to find angles.
Solve for x. Round to the nearest tenth of a degree, if necessary.
Answer:
x ≈ 39.5°
Step-by-step explanation:
using the cosine ratio in the right triangle
cos x = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{OP}{NP}[/tex] = [tex]\frac{64}{83}[/tex] , then
x = [tex]cos^{-1}[/tex] ( [tex]\frac{64}{83}[/tex] ) ≈ 39.5° ( to the nearest tenth )
a random sample of n equal to 64 scores is selected from a normally distributed population with mu equal to 77 and sigma equal to 21. what is the probability that the sample mean will be less than 79? hint: this is a z-score for a sample.
The probability of the sample mean being less than 79 is 77.64%
In order to solve the given problem we have to take the help of Standard error mean
SEM = ∑/√(n)
here,
∑ = population standard deviation
n = sample size
hence, the z-score can be calculated as
z = ( x' - μ)/σ/√(n)
here,
x' = sample mean
μ = population mean
σ = population standard deviation
n = sample size
adding the values into the formula
SEM = σ / √(n)
= 21/√64
= 2.625
z = (x' - μ)/SEM
= (79-77)/2.625
= 0.76
now, using standard distribution table we find that probability of a z-score is less than 0.77 then converting it into percentage
0.77 x 100
= 77%
The probability of the sample mean being less than 79 is 77.64%
To learn more about probability,
https://brainly.com/question/13604758
#SPJ4
true or false: a linear programming problem can have an optimal solution that is not a corner point. select one: true false
It is true that a linear programming problem can have an optimal solution that is not a corner point.
How given statement is true? Explain further?In linear programming, the optimal solution represents the point where the objective function is optimized while still satisfying all the constraints.
In some cases, the optimal solution may occur at a corner point of the feasible region, where two or more of the constraints intersect.
However, it is possible for the optimal solution to occur at a point that is not a corner point, but rather lies on an edge or a line segment of the feasible region.
This can occur when the objective function is parallel to one of the constraint lines or when there are redundant constraints that limit the feasible region.
Therefore, it is true that a linear programming problem can have an optimal solution that is not a corner point.
Learn more about linear programming.
brainly.com/question/15417573
#SPJ11
Question A scale model of a ramp is a right triangular prism as given in this figure. In the actual ramp, the triangular base has a height of 0.6 yards. What is the surface area of the actual ramp, including the underside? Enter your answer as a decimal in the box. yd² Right triangular prism. Each base is a triangle whose legs are 8 in, 5 in, and 5 in. The height of the triangles is 3 in. The prism is oriented so that the side labeled 8 in is on the bottom. The distance between the bases is labeled 4 in.
The surface area of the actual ramp, including the underside, is approximately 15.38 yd².
What is triangle?
A triangle is a three-sided polygon with three angles. It is a fundamental geometric shape and is often used in geometry and trigonometry.
To find the surface area of the actual ramp, we need to first find the dimensions of the ramp.
We are given that the scale model of the ramp is a right triangular prism with legs of 8 in, 5 in, and 5 in, and a height of 3 in. We can use these dimensions to find the dimensions of the actual ramp.
Since the ramp is a scale model, the ratio of the dimensions of the model to the actual ramp is the same for all corresponding dimensions. The height of the triangular base in the actual ramp is given as 0.6 yards, which is equal to 21.6 inches. So, we have:
height of actual ramp / height of model = 21.6 in / 3 in = 7.2
We can use this ratio to find the dimensions of the actual ramp:
height of actual ramp = 7.2 * 3 in = 21.6 in
length of actual ramp = 7.2 * 8 in = 57.6 in
width of actual ramp = 7.2 * 5 in = 36 in
Now we can find the surface area of the actual ramp. The surface area of the top and bottom of the ramp is the area of the triangular base plus the area of the rectangle formed by the length and width of the ramp:
Area of triangular base = (1/2) * base * height = (1/2) * 5 in * 5 in = 12.5 in²
Area of rectangular top and bottom = length * width = 57.6 in * 36 in = 2073.6 in²
Total surface area of top and bottom = 2 * (Area of triangular base + Area of rectangular top and bottom) = 2 * (12.5 in² + 2073.6 in²) = 4153.2 in²
The surface area of the sides of the ramp is the area of the three rectangles formed by the height and width of the ramp:
Area of one side rectangle = height * width = 21.6 in * 36 in = 777.6 in²
Total surface area of sides = 3 * Area of one side rectangle = 3 * 777.6 in² = 2332.8 in²
Finally, we add the surface area of the top and bottom to the surface area of the sides to get the total surface area of the ramp:
Total surface area of ramp = Surface area of top and bottom + Surface area of sides = 4153.2 in² + 2332.8 in² = 6486 in²
Converting to yards and rounding to two decimal places, we get:
Total surface area of ramp = 6486 in² / (36 in/yd)² = 15.38 yd² (rounded to two decimal places)
Therefore, the surface area of the actual ramp, including the underside, is approximately 15.38 yd².
To learn more about triangle from the given link:
https://brainly.com/question/2773823
#SPJ1
A rectangular prism is shown in the image.
A rectangular prism with dimensions of 5 yards by 5 yards by 3 and one half yard.
What is the volume of the prism?
twenty eight and one half yd3
forty one and one fourth yd3
eighty seven and one half yd3
166 yd3
The volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]
What is the volume of the prism?The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height.
In this case, the length is 5 yards, the width is 5 yards, and the height is 3 and 1/2 yards. We can convert the height to a mixed number fraction of 7/2 yards.
Therefore, the volume of the prism is:
V = lwh = 5 yards × 5 yards × 7/2 yards = 87.5 cubic yards
So, the volume of the prism is 87 and 1/2 cubic yards or 87.5 [tex]yd^{3}[/tex]
to know more about volume
brainly.com/question/1578538
#SPJ1
Find the three trigonometric ratios. If needed, reduce fractions.
5 cm
Find Surface Area. Rectangles use Aslw or Anbh. Triangles use A=1/ibb.
8 cm
cm
6 cm
2 cm
14
8 can
A=
12.m
12 cm
10 cm
C
First Part
The surface area of the two solids are listed below:
Case 1 - 232 square centimeters
Case 2 - 240 square centimeters
How to find the surface area of a solid
The surface area of a solid is the sum of the areas of all its faces. There are two cases of solids whose surface areas must be determined. The area formulas for triangle and rectangle are, respectively:
Triangle
A = 0.5 · b · h
Rectangle
A = b · h
Case 1
A = (6 cm) · (8 cm) + 2 · 0.5 · (6 cm) · (12 cm) + 2 · 0.5 · (8 cm) · (14 cm)
A = 232 cm²
Case 2
A = 2 · 0.5 · (8 cm) · (3 cm) + (8 cm) · (12 cm) + 2 · (5 cm) · (12 cm)
A = 24 cm² + 96 cm² + 120 cm²
A = 240 cm²
To learn more on surface areas of solids: https://brainly.com/question/31126484
#SPJ1
An animal population N(t) is modeled by the differential equation:
dN/dt = -0. 001N(N - 110)(N - 99). If N(0)=A, where A is a positive integer, what is the maximum value of the positive integer A such that extinction will occur?
For the given integer, the maximum starting population size that will eventually lead to extinction is 98, since any larger value will result in the population either stabilizing at a positive value or growing indefinitely.
The equation in question is:
dN/dt = -0.001N(N - 110)(N - 99)
Here, N represents the population size, and dN/dt represents the rate of change of the population with respect to time. The right-hand side of the equation tells us how the population size changes over time, and it's determined by the current population size N, as well as the two constants 110 and 99.
We can do this by setting dN/dt equal to zero and solving for N:
dN/dt = -0.001N(N - 110)(N - 99) = 0
=> N = 0, N = 99, N = 110
We can then plot the direction field (i.e., arrows indicating the direction of change) on each interval, and use this to determine the behavior of the solution curve. In this case, we can see that the direction of the arrows changes at each critical point, indicating that the population behavior switches between growing and declining as we move from one interval to the next.
Specifically, we can see that if the initial population size A is less than 99, the population will decline to extinction. If the initial population size is between 99 and 110, the population will initially decline but then grow and eventually stabilize at N = 110. If the initial population size is greater than 110, the population will grow exponentially and tend towards infinity.
To know more about integer here
https://brainly.com/question/15276410
#SPJ4
A container built for transatlantic shipping is constructed in the shape of a right
rectangular prism. Its dimensions are 4 ft by 9.5 ft by 13 ft. If the container is entirely
full and, on average, its contents weigh 0.05 pounds per cubic foot, find the total
weight of the contents. Round your answer to the nearest pound if necessary
Thus, the on average the contents weight for the transatlantic shipping is found as 24.7 pounds.
Explain about the rectangular prism:a solid, three-dimensional object with six rectangular faces.It is a prism due to its uniform cross-section along its whole length.Volume is a unit of measurement for the amount of 3-dimensional space a thing occupies. Cubic units are used to measure volume.Given dimension of rectangular prism
Length l = 4ft
width w = 9.5 ft
height h = 13 ft
Volume of rectangular prism = l*w*h
V = 4*9.5*13
V = 494 ft³
Now,
1 ft³ = 0.05 pounds
So,
weight of 494 ft³ = 494*0.05 pounds
weight of 494 ft³ = 24.7 pounds
Thus, the on average the contents weigh for the transatlantic shipping is found as 24.7 pounds.
know more about the rectangular prism
https://brainly.com/question/24284033
#SPJ1