A strain of Mycobacterium tuberculosis that is deficient in nonhomologous end joining repair should be more sensitive to damage by
X raysUV radiationGlycosylaseDepurination

The description of the transformations of the parent functions to produce the graphs of f(x) = sin(2x) and g(x) = csc(2x) are

a. The graphs of f(x) = sin(2x) and g(x) = csc(2x) are a horizontal compression by a factor of (1/2) of the graphs of y = sin(x) and y = csc(x).

b. 0, π/2, π, 3·π/2

c. 0, π/2, π, 3·π/2

A transformation of a function is an operation that changes the function's graph in some way.

a. The graph of f(x) = sin(2x) is obtained by taking the graph of sin(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the sine function has been multiplied by 2, which causes the period of the function to be halved.

The graph of g(x) = csc(2x) is obtained by taking the graph of y = csc(x) and horizontally compressing it by a factor of 1/2. This is because the argument of the cosecant function has been multiplied by 2, which causes the period of the function to be halved.

b. The x-intercepts of the graph of f(x) = sin(2x) are the values of x for which f(x) = 0. Since sin(2x) = 0 when 2x is an integer multiple of π, we can find the x-intercepts by solving the equation 2x = n·π for x, where n is an integer. This gives us x = n·π/2. o four x-intercepts of the graph of f are x = 0, x = π/2, x = π, and x = 3·π/2.

c. The vertical asymptotes of the graph of the function g(x) = csc(2x) are the values of x for which g(x) is undefined. Since csc(2x) is undefined when 2x is an integer multiple of π, we can find the vertical asymptotes by solving the equation 2x = n·π for x, where n is an integer. This gives us x = (n·π)/2. So, four vertical asymptotes of the graph of g are x = π/2, x = 3·π/2, x = 5·π/2 and x = 7·π/2.

Learn more on the transformation of a function here: https://brainly.com/question/30968712

#SPJ1

1. The quotient in lowest terms of the given rational division is (x+2)/(3x-9).

2. The values of r is A. x=-2 and B. x=0.

Factor is a quantity which when multiplied by another quantity, produces a given product. Factors are used to simplify and solve equations, as well as in other areas of mathematics. Factors can be numbers, variables, and expressions.

To find the lowest terms, we must divide the numerator and denominator by the same number. The largest common factor of the numerator and denominator is 3. Dividing both the numerator and denominator by 3, we get (x+2)/(3x-9) = (x+2)/(x-3).

The values of r that must be excluded from the domains of the expressions are x=0 and x=3. x=0 must be excluded because it will create a zero in the denominator which is not allowed. x=3 must also be excluded because it will create a zero in the numerator, and thus make the entire expression equal to 0. Thus, the correct answer is A. x=-2 and B. x=0.

For more questions related to division

https://brainly.com/question/25289437

#SPJ1

Answer: 126in

Step-by-step explanation:

ftc6yhunum8im

huju7kt6r

5+10=24

g5ghykn

Answer:

To find how many refrigerator magnets can be made with 9 3/8 inches of magnetic tape, we need to divide the total length of magnetic tape by the length of magnetic tape used for each magnet.

First, we need to convert the mixed number 9 3/8 to an improper fraction:

9 3/8 = (9 x 8 + 3)/8 = 75/8

Next, we divide 75/8 by 5/8 to find how many magnets can be made:

(75/8) ÷ (5/8) = (75/8) x (8/5) = 15

Therefore, 15 refrigerator magnets can be made with 9 3/8 inches of magnetic tape.

Answer: 3

Step-by-step explanation:

Thus, the values of x for the given secant lines on the circle is found to be: x = 3 cm.

A straight line connecting two points on such a function is known as a secant line.  The average change rate or just the slope across two locations can also be used to describe it.

The slope between two points and the average rate of shift in a function among two points are interchangeable terms.

Given data:

AE = 6 cm, AB = 3 cm, ED = x cm, BC = 15 cm

Now,

AD = AE + ED

AD = 6 + x ...eq 1

AC = AB + BC

AC  = 3 + 15

AC = 18 ....2

As the given two chords are intersecting internally,

AC x AB = AD x AE

18 x 3 = (6 + x) x 6

6 + x = 18 x 3 / 6

6 + x = 9

x = 3

Thus, the values of x for the given secant lines on the circle is found to be: x = 3 cm.

Know more about the secant lines

https://brainly.com/question/30162649

#SPJ1

Complete question:

Solve for x, using the secant lines.

AE = 6 cm, AB = 3 cm,ED = x = [?] cm, BC = 15 cm

Remember a.b = c.d

The diagram is attached.

The Existence and Uniqueness Theorem states that if a system of linear equations has a unique solution, then the solution can be found by solving the associated augmented matrix.

To determine whether a system of linear equations has a unique solution, the number of equations must equal the number of unknowns. Additionally, the equations must not be linearly dependent. If these criteria are met, then the Existence and Uniqueness Theorem guarantees that there is exactly one unique solution.

To illustrate, consider the system of equations:

x1 + x2 - x3 = 2  

2x1 - x2 + 2x3 = 8

3x1 + 2x2 - 4x3 = 0

= 4. Therefore, the Existence and Uniqueness Theorem guarantees that there is exactly one unique solution for this system.

See more about  existence and uniqueness at: https://brainly.com/question/30153142

#SPJ11

The exponential function that relates the total population, is [tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex] and the rate at which the population is increasing in the year 2019 is 69114.53.

The exponential function in mathematics is represented by the symbol eˣ (where the argument x is written as an exponent). The word, unless specifically stated differently, normally refers to the positive-valued function of a real variable, however it can be extended to the complex numbers or adapted to other mathematical objects like matrices or Lie algebras.

we know that ,

the population of any city can be modeled in the form of exponential function as follows:

[tex]P(t)=P(0)(1+R)^t[/tex]    

where, P(t)=population of the town at any given time t

P(0)=population of the town initially (in the year 2000 for this problem)=540,000

R=rate of increase (=5.1% in the given problem)

substituting the values in eqn(1), we get

[tex]P(t)=540,000\left [ 1+(5.1/100) \right ]^t[/tex]

as we know that

[tex]\because \frac{d}{dx}(a^x )=a^xln(a)[/tex]

so differentiating w.r.t. we get,

[tex]P'(t)=540,000\left [ 1+(5.1/100) \right ]^t*ln(1+(5.1/100) )\\\\P'(t)=540,000\left [ (105.1/100) \right ]^t*ln(105.1/100)\\\\P'(t)=540,000\left [ (1.051) \right ]^t*ln(1.051)[/tex]

so, the rate at which population is increasing in the year 2019 =

[tex]P'(19)=540,000(1.051)^{19}*ln(1.051)[/tex]

P'(19)= 69114.53.

Learn more about Exponential function:

https://brainly.com/question/29235027

#SPJ4

Complete question:

The population of Toledo, Ohio, in the year 2000 was approximately 540,000. Assume the population is increasing at a rate of 5.1 % per year.

a. Write the exponential function that relates the total population, P(t), as a function of t, the number of years since 2000. P(t) = =

b. Use part a. to determine the rate at which the population is increasing in t years. Use exact expressions. P'(t) people per year

c. Use part b. to determine the rate at which the population is increasing in the year 2019. Round to the nearest person per year. P'(19) = people per year

The postulate or property that can be used to prove that Kimball is not between Scottsbluff and Sidney is the Segment Addition Postulate.

The Segment Addition Postulate states that for three points A, B, and C, where B is between A and C,

            we have AB + BC = AC.

Given that Kimball is not between Scottsbluff and Sidney, this means that Kimball is either to the west of Scottsbluff or to the east of Sidney.

Let's assume that Kimball is to the west of Scottsbluff.

Then, we can draw the line segment as follows:

Scottsbluff ——————— Kimball ——————— Sidney

Let AB represent the distance between Scottsbluff and Kimball, and let BC represent the distance between Kimball and Sidney. According to the Segment Addition Postulate, AB + BC = AC, where AC is the distance between Scottsbluff and Sidney.

However, if we draw the line segment from Scottsbluff to Sidney without Kimball, we can see that the distance between the two points will always be shorter than the sum of the distances from Scottsbluff to Kimball and from Kimball to Sidney.

This implies that if Kimball is not between Scottsbluff and Sidney, then it is not possible for the segment addition postulate to hold true for the three points.

Therefore, we can use the segment addition postulate to prove that Kimball is not between Scottsbluff and Sidney.

To learn more about “segment addition postulate” refer to the https://brainly.com/question/2134445

#SPJ11

Answer: 131.95 cm

Step-by-step explanation:

The diameter of the semicircle is 42 cm, which means the radius is half of that:

r = d/2 = 42/2 = 21 cm

The circumference of a full circle with radius "r" is given by the formula:

C = 2πr

Since this is a semicircle, we need to divide the circumference by 2:

C/2 = πr

Substituting the value of "r" we found above, we get:

C/2 = π(21)

Simplifying:

C/2 = 21π

C = 2(21π)

C ≈ 131.95

Rounding to the nearest hundredth, we get:

C ≈ 131.95 cm

Therefore, the circumference of the semicircle is approximately 131.95 cm.

we can, now  if we look at 0 = x² + 5, that's when the parabola y-value is 0, that is, what's "x" when y = 0? well, if we look at the graph, the graph never touches the x-axis, so that means the graph never has any "real roots", only complex ones or imaginary ones.  We can tell because the graph never touches the x-axis.

Yes, the given values constitute a possible bootstrap sample from the original sample.

Bootstrap samples are taken with replacement from the original data set. In other words, it means that each sample consists of a random sample of the same size as the original data set taken from the original data set.

Hence, a given set of values can be a bootstrap sample from the original sample as long as the values are randomly selected from the original sample and with replacement.

The sample is said to be a bootstrap sample from the original data set if it satisfies the following properties:

1. The bootstrap sample must be of the same size as the original data set.

2. Each observation from the original data set must have an equal chance of being selected in each bootstrap sample.3. The bootstrap samples must be independent of each other.

In the given problem, the sample consists of 5 values, namely 84, 71, 79, 96, and 87.

These values can be a bootstrap sample from the original sample as long as the values were randomly selected with replacement from the original sample.

Since the problem does not provide any information on how the sample was obtained, it cannot be determined whether or not it is a bootstrap sample.

Therefore, the answer is that the given values constitute a possible bootstrap sample from the original sample.

For similar question on original sample.

https://brainly.com/question/27829028

#SPJ11

Answer:

68.2 degrees

Step-by-step explanation:

[tex]1.19\frac{180}{\pi }[/tex]

[tex]68.2[/tex] degrees

In the given pairs of intersecting parallel lines, the measure of ∠MPQ=125°.

Parallel lines are coplanar infinite straight lines in geometry that never cross. In the same three-dimensional geometry, parallel planes are any planes that never cross. Curves with a fixed minimal distance between them and no contact or intersection are said to be parallel.

The angles created when a diagonal intersects two parallel lines are known as corresponding angles. According to the definition of corresponding angles, when two parallel lines cross a third one, the angles that are in the same relative location at each intersection are referred to as being corresponding angles to one another.

In this figure, ∠LMN=∠MPQ since they are corresponding angles

5x=3x+50

on solving, we get

x=25

Therefore, ∠MPQ= 125°

To know more about parallel lines, visit

https://brainly.com/question/16701300

#SPJ1

A Zygote is/are formed immediately after the union of sperm and ovum in the fallopian tube.

A zygote is a cell formed when two gamete cells are fused by means of sexual reproduction. These cells contain a single set of chromosomes from both the father and the mother of the offspring. As a result, the zygote contains all of the genetic information required to create a completely new person. After the fertilization of the ovum by the sperm, the zygote is formed. The zygote will continue to divide into a multicellular embryo and eventually a fetus after fertilization has taken place.

The fusion of a sperm cell with an ovum in the fallopian tube leads to the formation of a zygote, which involves the combination of genetic material from both parents resulting in the creation of a single-celled zygote. This zygote then initiates the process of cell division and progresses into an embryo.

To know more about the "zygote": https://brainly.com/question/1151355

#SPJ11

Answer:$30

Step-by-step explanation:

45-14=31

31-1=30

so the answer is 30

hope this helps

Maggie is 30 years old, and Bobby is 15 years old if in 3 years, Maggie's age will be 50% greater than Bobby's age and years ago when Maggie was 25 years old, Bobby was 10 years old.

Maggie is 15 years older than Bobby. We have to determine Bobby's age.

Let's suppose that Bobby's age is x, so Maggie's age would be x + 15 years.

1) In 3 years, Maggie's age will be 50% greater than Bobby's age.

The age of Maggie in 3 years would be (x + 15) + 3, and the age of Bobby would be x + 3.

According to the problem, Maggie's age in 3 years would be 50% greater than Bobby's age in 3 years.

So, (x + 15) + 3 = (1.5)(x + 3)

Simplifying the above equation, we get

x + 18 = 1.5x + 4

Now, we will solve for

x.x - 1.5x = -14-0.5x = -14x = 28

Therefore, Bobby is 28 years old now.

2) Years ago, when Maggie was 25 years old, Bobby was 10 years old.

Let's assume that x years ago Maggie was 25 years old. Thus, Bobby was 10 years old at that time.

So, x + 25 = (x + 10) + 15x = 15

Therefore, Maggie is 30 years old now. And Bobby is 15 years old now.

To learn more about linear equation:

https://brainly.com/question/28732353

#SPJ11

Answer:

y- intercept = 18

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

y = - 3x + 8 ← is in slope- intercept form

with slope m = - 3

• Parallel lines have equal slopes , then

y = - 3x + c ← is the partial equation

to find c substitute (5, 3 ) into the partial equation

3 = - 3(5) + c = - 15 + c ( add 15 to both sides )

18 = c

y = - 3x + 18 ← equation of parallel line

with y- intercept c = 18

The given values are inserted in the point-slope form which formed the equation 140 = -14x + 10 and has been graphed.

When you know the slope of the line to be investigated and the given point is also the y-intercept, you can utilize the slope-intercept formula, y = mx + b. (0, b).

The y value of the y-intercept point is denoted by the symbol b in the formula.

The general form of a linear equation is y-y1=m(x-x1).

It draws attention to the line's slope and one of the line's points (that is not the y-intercept).

So, in the given situation:
The point-slope form is: y = mx + b

Then y is y and b is the x value and m is the slope.

Now, insert values as follows:

y = mx + b

140 = -14x + 10

Graph the equation as follows:

(Refer to the graph attached below)

Therefore, the given values are inserted in the point-slope form which formed the equation 140 = -14x + 10 and has been graphed.

Know more about the point-slope form here:

https://brainly.com/question/24907633

#SPJ1

The statement "A global firm is a firm that operates in more than one country and captures R&D, production, logistical, marketing, and financial advantages not available to purely domestic competitors." is the correct .

Therefore option C is correct.

What is a global firm?

A global firm is a company that operates in more than one country and has access to research and development, production, logistical, marketing, and financial advantages that are not available to purely domestic rivals.

Global companies have expanded beyond their home country's boundaries to capitalize on the advantages of global sourcing and production.

Global companies have a variety of advantages that pure domestic companies do not have.

The following are some of the benefits of global businesses:

In conclusion, a global firm is a firm that operates in more than one country and captures R&D, production, logistical, marketing, and financial advantages not available to purely domestic competitors.

Therefore option C is correct.

To know more about Global firm:

https://brainly.com/question/28318131

#SPJ11

Rolling-circle replication of plasmids proceeds in one direction from a single fixed origin

Explanation:

Rolling-circle replication of plasmids is a replication mechanism in which the replication process moves in one direction from a single fixed origin. Rolling-circle replication is a process that is often seen in circular plasmid DNA. It is a process that begins with an initiator protein, which is responsible for the nicking of a single DNA strand.The initiation point allows the helix to begin unwinding in one direction.

             As the DNA helix unwinds, replication is carried out in a continuous manner, and the helix is wound up behind it. During the replication process, a new strand is synthesized that is attached to the parent strand's 3' end.

                     Rolling-circle replication, on the other hand, is utilized to produce new plasmids that have a single strand, which can then be employed in other cells for the production of proteins or for research purposes.

To know more about plasmids :

https://brainly.com/question/29735179

#SPJ11

Extending to Three Dimensions depend on the specific questions asked and can be calculated using the formula for the volume of a three-dimensional object.

The answers to Edmentum's Unit 3 Post Test: Extending to Three Dimensions depend on the specific questions asked. Generally, the test covers topics such as the definition of three-dimensional objects, the properties of three-dimensional space, and the relationships between three-dimensional figures. For example, a question might ask how to calculate the volume of a rectangular prism. To answer this, one would need to calculate the area of each of the rectangles that make up the prism and then multiply them together to get the volume. For example, if the length of the prism is 4, the width is 3, and the height is 2, the volume of the prism would be 24 (4 * 3 * 2 = 24).

Learn more about Dimensions here:

https://brainly.com/question/31209488

#SPJ1

Answer:

the amswer is five apples

Answer:

Step-by-step explanation:

We know that

To now how many pounds will be in each bag, we have to divide

[tex]3 \ lb \div12 \ bags =0.25 \ lb/bag[/tex]

This means that May will have 0.25 pounds per bag, that is, a quarter pound of raisin in each bag.

If we divide this using the long method, we would have to add a zero to "3", because 3 is less than 12, so we have to transform it from "3" to "30". To be able to do that, we have to add a decimal point to the quotient, and then continue with the division.

Answer:

1=26°

2=154°

3=26°

4=26°

5=154°

6=154°

7=26°

Surface area

2 triangles: Just do bh instead of 1/2bh, bh = 8 * 3 = 24

2 rectangles: 2bh but we first need to find h. The altitude pictured by dotted line, creates a right triangle where its hypotenuse is h. Since it also has side lengths 3 and 4, h = 5 (by pythag triplets). Then, 2bh = 2 * 12 * 5 = 120

base: bh = 12 * 8 = 96

Adding these areas we have 24 + 120 + 96 = 240

Volume: Bh (big b signifies area of the base)

B = area of the triangle = 1/2bh = 1/2 * 8 * 3 = 12

So Bh = 12 *12 = 144

Hope this helps you understand the process.

The volume of solid 1 is 14 cubic units calculated through the formula of volume.

Volume is the maximum quantity of space that an object can contain. Volume, which is essentially a measurement of an object's size, is the quantity of space a thing occupies. A three-dimensional object's volume, which is calculated in cubic units, is the quantity of space it takes up. For instance, glass has a cylindrical form and can hold a certain volume of water.

Let V1 and V2 be the volumes of the congruent solids 1 and 2, respectively. The volume of their union is given

V1 U V2 = V1+V2-V1∩V2

We know that V1 ∩ V2 is a right triangular prism with height √3 and a base that is an equilateral triangle of side length 2. So, the volume can be calculated with the following formula:

V1 ∩ V2 = (1/2) * base * height * heightbase

where base is the area of the equilateral triangle, which is √3, height is √3, and height base is 2. Plugging in these values, we get:

V1 ∩ V2 = (1/2) * √3 * √3 * 2 = 3

Now we can use the given information to find the volume of 1:

25 = V1 + V2 - V1 ∩ V2

25 = V1 + V2 - 3

We also know that V1 = V2, since the solids are congruent.

Substituting the following value with the above equation, we get:

25 = 2V1 - 3

28 = 2V1

V1 = 14

Therefore, the volume of solid 1 is 14 cubic units.

To know more about volume, visit

https://brainly.com/question/1578538

#SPJ1

Answer:

Mira's monthly income: Rs. 55,000

Allowance: Rs. 3,000

Total monthly income before festival expenses: Rs. 58,000

Festival expenses (equivalent to monthly basic salary): Rs. 55,000

Total monthly income including festival expenses: Rs. 113,000

Amount deducted for provident fund (10% of monthly income excluding allowance and festival expenses):

10% of (Rs. 55,000) = Rs. 5,500

Total monthly deduction for provident fund: Rs. 5,500

Taxable income:

Total monthly income including festival expenses - Total monthly deduction for provident fund = Rs. 107,500

To calculate the annual tax to be paid by Mira, we need to know the income tax rates and tax slabs applicable for the current financial year. Without this information, we cannot provide an accurate answer