a student adds solid silver chloride (agcl) to each of two beakers: one containing 1.0 l of pure water, and one containing 1.0 l of 0.500 m nacl. in which will agcl be more soluble, and why?

The Ph of a solution is 8.46

The reaction is:

[tex]HC_2H_3O+2 + NaOH - > NaC_2H_3O_2 + H_2O[/tex]
This is a neutralization reaction, where the acid HC2H3O2 reacts with the base NaOH to form the salt NaC2H3O2 and water.

Next, we need to calculate the amount of each reagent used in the reaction. To do this, we use the equation:

Molarity (M) = moles (mol) / volume (L)

For [tex]HC_2H_3O_2[/tex]:

M = 0.60 M

Volume = 25.0 ml = 0.025 L

moles = M x volume = 0.60 M x 0.025 L = 0.015 mol

For NaOH:

M = 0.60 M

Volume = 15.0 ml = 0.015 L

moles = M x volume = 0.60 M x 0.015 L = 0.009 mol

Since the reaction is a 1:1 stoichiometry, we can see that 0.009 mol of NaOH is enough to react with all the HC2H3O2 in the solution, leaving some excess NaOH. Therefore, we need to calculate the concentration of the remaining NaOH in the solution:

moles of NaOH remaining = moles of NaOH added - moles of HC2H3O2 reacted

= 0.009 mol - 0.015 mol = -0.006 mol (negative sign indicates there is no excess NaOH remaining)

To calculate the concentration of the NaOH that reacted, we need to subtract the moles of NaOH remaining from the total moles of NaOH added:

moles of NaOH reacted = moles of NaOH added - moles of NaOH remaining

= 0.009 mol - (-0.006 mol) = 0.015 mol

The volume of the final solution is:

Total volume = volume of HC2H3O2 + volume of NaOH

= 25.0 ml + 15.0 ml = 0.040 L

The concentration of NaC2H3O2 in the final solution is:

Molarity (M) = moles / volume

M = 0.015 mol / 0.040 L = 0.375 M

Now, we need to calculate the pH of the solution. NaC2H3O2 is the conjugate base of HC2H3O2, which means it will hydrolyze in water to form OH- ions:

NaC2H3O2 + H2O ⇌ NaOH + HC2H3O2

The equilibrium constant for this reaction is called the base dissociation constant (Kb) and is given by:

Kb = [NaOH] [HC2H3O2] / [NaC2H3O2]

We can use the relationship:

Kw = Ka x Kb

Where Kw is the ion product constant for water, which is 1.0 x 10^-14 at 25°C, and Ka is the acid dissociation constant for HC2H3O2, which is 1.8 x 10^-5 at 25°C.

Rearranging the equation, we get:

Kb = Kw / Ka = 1.0 x 10^-14 / 1.8 x 10^-5 = 5.6 x 10^-10

Next, we need to calculate the concentration of HC2H3O2 and NaOH that are present in the solution after hydrolysis. Since NaC2H3O2 is a strong electrolyte,

it will completely dissociate in water to form Na+ and C2H3O2- ions. Therefore, the concentration of Na+ ions will be equal to the concentration of NaC2H3O2, which is 0.375 M.

The concentration of OH- ions can be calculated from the Kb expression:

Kb = [OH-]^2 / [HC_2H_3O_2]

[OH-]^2 = Kb x [[tex]HC_2H_3O_2[/tex]] = 5.6 x 10^-10 x 0.015 M = 8.4 x 10^-12

[OH-] = 2.9 x 10^-6 M

The pH of the solution can be calculated from the relationship:

pH + pOH = 14

pOH = -log [OH-] = -log (2.9 x 10^-6) = 5.54

pH = 14 - pOH = 14 - 5.54 = 8.46

To learn more about : Ph

https://brainly.com/question/172153

#SPJ11

There are 7.52 x 10^22 molecules of carbon dioxide gas, CO2, in 0.125 moles.

        The number of molecules in a given number of moles can be calculated using Avogadro’s number, which is approximately 6.022 x 10^23. This number represents the number of particles (atoms or molecules) in one mole of a substance.

         To calculate the number of molecules in 0.125 moles of CO2, we can multiply the number of moles by Avogadro’s number: 0.125 moles x (6.022 x 10^23 molecules/mole) = 7.52 x 10^22 molecules.

         Avogadro’s number is a fundamental constant in chemistry and is used in many calculations involving moles and molar mass.  

To learn more about carbon dioxide,

brainly.com/question/3049557

The presence of an alcohol group (-OH) in a molecule, compared to the presence of a methyl group (-CH3), increases the ΔT value of a molecule.

The presence of an alcohol group (-OH) leads to the formation of hydrogen bonds, which are stronger than the van der Waals forces present in molecules with a methyl group (-CH3). As a result, more energy is required to break these hydrogen bonds, leading to a higher ΔT value (a greater change in temperature during phase transitions).

Therefore the correct answer is A. increases.

To learn more about alcohol, refer:-

https://brainly.com/question/16975086

#SPJ11

The correct answer is option D. All of the above. It is necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube to prevent any accidents or injuries.

If sulfuric acid is added too soon, the solution may boil and the acid will spew out of the test tube, perhaps resulting in burns.

Sulfuric acid is also an endothermic reaction, which means it takes energy from its surroundings and has the potential to crystallise or cause the solution to harden.

Last but not least, adding the sulfuric acid gradually enables more precise measurement of the supplied sulfuric acid volume.

It is crucial to gradually add the sulfuric acid to the test tube mixture of p-cresol and acetic acid as a result of all these considerations.

Complete Question:

Why would it be necessary to slowly add the sulfuric acid to the p-cresol/acetic acid mixture in the test tube?

Options:

A.  To ensure accurate measurement of the volume of sulfuric acid added.

B. To prevent the solution from boiling and splattering the acidic solution out of the test tube.

C. To prevent the endothermic reaction from solidifying the solution.

D. All of the above.

To learn more about sulfuric acid visit:

https://brainly.com/question/10220770

#SPJ4

The pressure of gas is 1.05 atm when a 1.25 g sample of CO₂ is contained in a 750ml flask at 22.5°C.

Molecular weight of CO₂ is 1.25g ,Volume of CO₂ is 750ml,Temperature of CO₂ is 22.5°C and the gas constant is 0.08206 L atm/mol K.

Using the ideal gas law equation the pressure is found to be 1.05 atm.

To calculate the pressure of the gas, we can use the ideal gas law equation: [tex]PV=nRT[/tex]
Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000: 750 ml = 0.75 L.
Next, we need to calculate the number of moles of CO₂ present in the flask. We can use the molecular weight of CO₂ to convert from grams to moles:

[tex]1.25 * (1 /44.01 ) = 0.0284 mol[/tex]
Now we can plug in the values into the ideal gas law equation:

[tex]PV=nRT[/tex]
[tex]P * 0.75 L = 0.0284 mol  * 0.08206 L*atm/mol*K * (22.5 + 273.15) K[/tex]
Simplifying and solving for P, we get:
[tex]P = (0.0284 * 0.08206 * 295.65) / 0.75 = 1.05 atm[/tex]
Therefore, the pressure of the gas in the flask is 1.05 atm.

Learn more about ideal gas law equation here:

https://brainly.com/question/15379358

#SPJ11

Answer:

Traction

Explanation:

Traction is a set of mechanisms for straightening broken bones or relieving pressure on the spine and skeletal system

The scientists chose the top of Mauna Loa, Hawaii, is the best place to measure the atmospheric CO₂ concentrations is because to measure the CO₂ in the air masses which could be representative the Northern Hemisphere, and the globe.

To measure the CO₂ in the air masses which could be representative the Northern Hemisphere, and the globe. The rise in level of the atmospheric CO₂ concentrations and this resulted in the global warming and the climate change.

The climate change is the serious consequences, it also including the rising sea levels, it will be more frequent and the severe weather events, it will increased the risk of the droughts and the wildfires.

To learn more about atmospheric CO₂ here

https://brainly.com/question/31036310

#SPJ4

The axial stereoisomer is the most reactive in this type of reaction.

In an SN2 reaction with intramolecular catalysis, the most reactive stereoisomer is the one with an axial thioether group.

This is because in the axial position, the thioether group is closer to the leaving group (chlorine), allowing for more efficient overlap of their orbitals and a lower energy transition state.

The equatorial thioether group is farther away from the leaving group, resulting in a higher energy transition state and a slower reaction. Therefore, the axial stereoisomer is the most reactive in this type of reaction.

Learn more about stereoisomer

https://brainly.com/question/31147524

#SPJ4

Answer:

We can use the ideal gas law to solve for the number of moles of gas:

PV = nRT

where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature in Kelvin.

Plugging in the given values:

(1.35 atm)(25 L) = n(0.0821 L·atm/mol·K)(300 K)

n = (1.35 atm)(25 L) / (0.0821 L·atm/mol·K)(300 K)

n = 1.29 mol

Therefore, there are 1.29 moles of gas in the container.

There are 2.208 moles of gold (III) chloride in 670 g.

To determine the number of moles in 670 g of gold (III) chloride, we need to first calculate the molar mass of gold (III) chloride, which is AuCl3.

The atomic mass of gold is 196.97 g/mol and the atomic mass of chlorine is 35.45 g/mol. Since there are three chlorine atoms in each molecule of gold (III) chloride, we multiply the atomic mass of chlorine by 3:

35.45 g/mol x 3 = 106.35 g/mol

Adding the atomic masses of gold and chlorine together gives us the molar mass of gold (III) chloride:

196.97 g/mol + 106.35 g/mol = 303.32 g/mol

Now, we can use this molar mass to convert 670 g of gold (III) chloride into moles:

670 g / 303.32 g/mol = 2.208 moles

Therefore, there are 2.208 moles of gold (III) chloride in 670 g.

Know more about  molar mass    here:

https://brainly.com/question/837939

#SPJ11

Energetic molecules such as NADH and ATP are often reactants of exergonic reactions.

Exergonic reactions are those that discharge energy and have a harmful Gibbs-free energy change. In these reactions, the reactants have more free energy than the products, so the excess energy is cast in the state of heat. An exergonic reaction is a chemical reaction where the shift in the free energy is negative.

Energetic molecules like NADH and ATP store energy in their chemical adhesives, which can be emitted in exergonic reactions to drive endergonic responses that need energy input. Therefore, they are usually employed as reactants in exergonic reactions.

To learn more about Exergonic reactions

https://brainly.com/question/30800156

#SPJ4

As a result, it is important to store NaOH in a dry and cool place, away from any sources of moisture or water.

NaOH, also known as sodium hydroxide, is a highly hygroscopic solid. This means that it can easily absorb moisture from its surroundings, including the air. When NaOH absorbs water, it can become more corrosive and potentially dangerous.

This is why it is also important to handle NaOH with care and wear appropriate protective gear, such as gloves and goggles. Additionally, any spills or leaks should be cleaned up immediately and properly disposed of according to local regulations.

By following these precautions, NaOH can be safely used in a variety of applications, including in the production of soap, paper, and textiles.

To learn more about : water

https://brainly.com/question/19491767

#SPJ11

The sigma bond between b and f in tetrafluoroborate ion, bf4-, is formed by the overlap of the atomic orbitals of boron and fluorine. Specifically, each of which contributes one p orbital to form a sp3-p sigma bond.

In the tetrafluoroborate ion (BF4-), the bond between boron (B) and fluorine (F) is a sigma (σ) bond. The σ bond is formed by the overlap of atomic or hybrid orbitals.Boron in BF4- is sp3 hybridized, which means that it has four hybrid orbitals that are involved in bonding. Three of these hybrid orbitals are involved in bonding with three of the fluorine atoms, while the fourth hybrid orbital is used to form the σ bond with the fourth fluorine atom.Fluorine is a halogen and has the electron configuration of 1s2 2s2 2p5. In BF4-, each of the fluorine atoms is also involved in the formation of the σ bond with boron. Fluorine has three unpaired electrons in its 2p orbitals that can form a σ bond by overlapping with the sp3 hybrid orbital of boron.Therefore, the σ bond between boron and fluorine in BF4- is formed by the overlap of the sp3 hybrid orbital of boron and the 2p orbital of the fluorine atom.

Learn more about fluorine here

https://brainly.com/question/1940697

#SPJ11

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen gas.

Hydrogen gas is the most abundant element in the Milky Way galaxy, making up around 75% of its elemental mass. This is why hydrogen is often used as a tracer for studying the structure and dynamics of galaxies. The gas in the disk of the Milky Way is mostly composed of atomic hydrogen (H I) and molecular hydrogen (H2), with smaller amounts of other elements like helium and carbon. Studying the distribution and properties of this gas can provide insight into the formation and evolution of the Milky Way.

learn more about gas here

https://brainly.com/question/28549254

#SPJ11

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen gas.

The most common constituent of gas in the disk of the Milky Way galaxy is hydrogen. Hydrogen is the most abundant element in the universe and makes up the majority of the gas in the disk of the Milky Way galaxy, with its presence primarily in the form of atomic and molecular hydrogen.  It is often found in the form of molecular hydrogen ([tex]H_{2}[/tex]) in interstellar clouds, which are regions of gas and dust where stars are formed. Other common constituents of gas in the Milky Way galaxy's disk include helium (He), carbon (C), oxygen (O), nitrogen (N), and trace amounts of other elements.

To know more about Milky Way:

https://brainly.com/question/30417276

#SPJ11

The goal of a Relative and Absolute Dating Lab Report is to discover and utilize the concepts of relative and absolute dating methods for determining the age of geological materials like rocks and fossils.

Geologists frequently need to know the age of the material they find. They use absolute dating methods, also known as numerical dating, to give rocks an exact date, or date range, in years. This is distinct from relative dating, which only places geological events in chronological order.

Relative dating is the process of determining whether one rock or geologic event is older or younger than another without knowing their exact ages that is, how many years ago the object was formed.

Relative dating is used to order geological events and the rocks they leave behind. Stratigraphy is the process of reading the order. Relative dating does not yield precise numerical dates for the rocks.

To know more about the Lab visit:

https://brainly.com/question/29869193

#SPJ1

The moles of NaF that must be dissolved in 1.00 liter of a saturated solution of PbF₂ at 25˚C to reduce the [Pb²⁺] to 1 x 10⁻⁶ molar is 2.0 x 10⁻⁵.

The solubility product expression for PbF₂ is given by:

At equilibrium, the product of the ion concentrations must be equal to the solubility product constant. We are given that the [Pb²⁺] in the saturated solution is 1 x 10⁻⁶ M. Therefore, we can use the Ksp expression to calculate the concentration of F- in the solution:

Now, we can calculate the amount of NaF needed to reduce the [F⁻] concentration to 2.0 x 10⁻¹ M. Since NaF is a 1:1 electrolyte, the concentration of F- will be equal to the concentration of NaF added.

However, we need to dissolve this amount of NaF in a saturated solution of PbF₂. Therefore, we need to check that the amount of NaF we added will not exceed the maximum amount that can dissolve in the solution at 25˚C.

To learn more about solubility, here

https://brainly.com/question/29661360

#SPJ4

The reaction of both cis and trans isomers of 2,3-dimethyloxirane with HBr gives butane-2,3-diol. However, one of these stereoisomers gives a single achiral product, while the other gives two chiral enantiomers.

The reaction of 2,3-dimethyloxirane with itself is an example of an intramolecular nucleophilic substitution reaction.

The cis isomer of 2,3-dimethyloxirane has a plane of symmetry and is therefore an achiral molecule. When it reacts with itself, it will only form a single product nucleophilic substitution reaction.

The trans isomer of 2,3-dimethyloxirane is a chiral molecule and does not have a plane of symmetry. When it reacts with itself, it will form two enantiomers of the product, one being the mirror image of the other.

Learn more about 2,3-dimethyloxirane

https://brainly.com/question/15181918

#SPJ4

The correct expression for the equilibrium constant (Kc) for the reaction:
[tex]2Fe2O3(s) + 3C(s) ⇌ 4Fe(s) + 3CO2(g)[/tex] is:  [tex]Kc=[Fe]4[CO2]3/[Fe2O3]2[C]3[/tex]

The equilibrium constant expression for the given reaction, [tex]2Fe2O3(s) + 3C(s) ⇌ 4Fe(s) + 3CO2(g)[/tex]  is written as the ratio of the product concentrations raised to their respective coefficients divided by the reactant concentrations raised to their respective coefficients.

The ratio of the equilibrium concentrations of the products to the concentrations of the reactants raised to their respective powers to match the coefficients in the equilibrium equation at equilibrium is K, according to the law of mass action. The equilibrium constant expression is known as the ratio, a condition where there is a balance between opposing and static forces.

In this case, it would be:
[tex]Kc = ([Fe]^4[CO2]^3)/([Fe2O3]^2[C]^3)[/tex]

learn more about equilibrium constants here:

https://brainly.com/question/3159758

#SPJ11

The correct expression for the equilibrium constant for the given reaction is:
C) Kc=[Fe2O3]2[C]3[Fe]4[CO2]3

The equilibrium constant (Kc) for a chemical reaction is written using the concentrations of the species involved in the reaction. Here's the general format for writing the equilibrium constant expression:

For the generic reaction:

aA + bB ⇌ cC + dD

The equilibrium constant (Kc) expression would be: Kc = [C]^c [D]^d / [A]^a [B]^b

where [A], [B], [C], and [D] represent the concentrations of the respective species at equilibrium, and a, b, c, and d are the stoichiometric coefficients of the species in the balanced chemical equation.

To know more about Equilibrium Constant:

https://brainly.com/question/29117627

#SPJ11

False. In a closed system, matter can not enter or exit that is there is no change in the matter of the system.

Three types of systems exist in nature:

1. Open System: In this system, the matter can interact with the surroundings or matter can enter or exit the system from the surrounding. Similarly, the energy of the system also interacts with its surroundings and can be lost or gained.

For example oceans etc.

2. Closed system: In this system, the matter is unable to interact with the surroundings that are matter can't exit or enter the system. While the energy of the system is able to interact with the surroundings.

For example Earth etc

3. Isolated system: In this system, both matter and energy are unable to interact with the surrounding. There is no exchange between matter and the energy of surroundings.

For example thermos-teel bottles etc.

Learn more about Open Systems:

https://brainly.com/question/28891854

#SPJ4

The answer is (C) HS.

Each of the other options can donate a proton (act as a Brönsted acid) in certain conditions and accept a proton (act as a Brönsted base) in other conditions. However, HS is only capable of acting as a Brönsted base and accepting a proton, but it cannot donate a proton and act as a Brönsted acid.

Out of the given options, the one that cannot act as both an acid and a base is (C) HS. This is because HS can only act as a brönsted acid by donating a proton to a brönsted base, but it cannot act as a brönsted base by accepting a proton from a brönsted acid. This is because it lacks a lone pair of electrons on the sulfur atom, which is necessary for accepting a proton.

On the other hand, [tex]HCO_{3}[/tex] ,[tex]NH_{4}[/tex]+, and [tex]H_{2}[/tex][tex]O_{4}[/tex]P can all act as both brönsted acids and bases depending on the reaction conditions.

Learn more about Brønsted acid here:

https://brainly.com/question/24065957

#SPJ11

(B) NH4⁺,  cannot act as both a Brønsted acid and a Brønsted base.

A Brønsted acid is a species that can donate a proton (H⁺), while a Brønsted base is a species that can accept a proton (H⁺).

(A) HCO3⁻ can act as an acid by donating a proton to form CO3²⁻ or as a base by accepting a proton to form [tex]H_{2}CO_{3}[/tex].
(C) HS⁻ can act as an acid by donating a proton to form S²⁻ or as a base by accepting a proton to form [tex]H_{2}S[/tex].
(D) H2PO4⁻ can act as an acid by donating a proton to form HPO4²⁻ or as a base by accepting a proton to form [tex]H_{3}PO_{4}[/tex].

However,
(B) NH4⁺ can only act as a Brønsted acid by donating a proton to form [tex]NH_{3}[/tex] but cannot act as a Brønsted base since it has no lone pair of electrons to accept a proton.

To know more about Bronsted Theory:

https://brainly.com/question/148529

#SPJ11

The volume of the gas when the temperature drops to 270 K and the pressure is 150 N/cm², is 135 cm³

The following data were obtained from the question.

The new volume of the gas can be obtained by using the combined gas equation as illustrated below:

P₁V₁ / T₁ = P₂V₂ / T₂

(100 × 225) / 300  = (150 × V₂) / 270

Cross multiply

300 × 150 × V₂ = 100 × 225 × 270

Divide both side by (300 × 150)

V₂ = (100 × 225 × 270) / (300 × 150)

V₂ = 135 cm³

Thus, the volume of the gas is 135 cm³

Learn more about volume:

https://brainly.com/question/14560487

#SPJ1

Yes, the reaction worked. Three key signals that suggest the reaction worked include the appearance of the product, the presence of the expected starting material, and the absence of any other byproducts.

The product, 1-methoxy-2-chloro-4-nitrobenzene, can be identified by its distinct color, smell, and boiling point. Additionally, if the expected starting material is present, then it shows that the reaction has taken place.

Lastly, the absence of any other byproducts such as unreacted starting material implies that the reaction was successful. All together, all three signals indicate that the reaction worked.

Know more about Three key signals here

https://brainly.com/question/31114075#

#SPJ11

Okay, let's solve this step-by-step without using quadratics:

1) The equilibrium constant Kc = 0.36 means the equilibrium lies to the left. So there will be more N2O4 than NO2 at equilibrium.

2) The initial concentration of N2O4 is 0.1 mol dm^-3. Let's call this [N2O4]initial.

3) At equilibrium, the concentrations of N2O4 and NO2 will be [N2O4]equil and [NO2]equil respectively.

4) We know the equilibrium constant expression for this reaction is:

Kc = ([NO2]equil)^2 / [N2O4]equil

5) Setting this equal to 0.36 and plugging in 0.1 for [N2O4]initial, we get:

0.36 = ([NO2]equil)^2 / (0.1 - [NO2]equil)

6) Simplifying, we get:

0.036 = [NO2]equil^2

7) Taking the square root of both sides, we get:

[NO2]equil = 0.06 mol dm^-3

So the equilibrium concentration of NO2 is 0.06 mol dm^-3.

Let me know if you have any other questions! I can also provide a more step-by-step explanation if needed.

The change of state described is melting (option C). In melting, the particles of a substance gain energy and change from a regular ordered structure to a disordered structure with large distances between the particles, which results in the substance changing from a solid to a liquid state.

Melting is a physical process in which a substance changes from its solid state to its liquid state. It occurs when a solid substance absorbs enough heat energy to overcome the forces of attraction between its particles, causing the particles to move faster and become less ordered.

As a result, the substance loses its definite shape and takes the shape of the container in which it is placed, while retaining its volume. The temperature at which a substance melts is known as its melting point.

An example of melting is the melting of ice. At the melting point of water, which is 0°C (32°F) at standard pressure, ice changes from its solid state to its liquid state. The resulting liquid water takes the shape of its container, such as a glass, but still has the same volume as the ice from which it was melted.

Learn more about melting here:

https://brainly.com/question/15873508

#SPJ9

2.77 moles of water vapour (H2O) are created when 154.42 g of oxygen gas (O2) reacts with an excess of ethane (C2H6).

Calculation-

In order to create water vapour [tex](H_2O)[/tex], ethane [tex](C_2H_6)[/tex]and oxygen gas (O2) must be burned. The chemical equation for this reaction is:

[tex]C_2H_6 + 7O_2 -- > 4H_2O + 6CO_2[/tex]

We may deduce from the equation that when 1 mole of ethane (C2H6) interacts with 7 moles of oxygen gas (O2), 4 moles of water vapour (H2O) are created.

We must utilise its molar mass to translate the 154.42 g of oxygen gas (O2) consumed into moles. 32 g/mol (16 g/mol for each oxygen atom multiplied by two for O2) is the molar mass of oxygen gas.

Moles of oxygen gas (O2) = Mass of oxygen gas (O2) / Molar mass of oxygen gas (O2)

Moles of oxygen gas (O2) = 154.42 g / 32 g/mol

Moles of oxygen gas (O2) = 4.83 mol (rounded to two decimal places)

The balanced equation's stoichiometry predicts that 7 moles of oxygen gas [tex](O_2)[/tex]and 4 moles of water vapour [tex](H_2O)[/tex] will react. We can thus calculate the moles of water vapour [tex](H_2O)[/tex] created using the stoichiometric principle.

Moles of water vapor [tex](H_2O)[/tex] = Moles of oxygen gas [tex](O_2)[/tex] × (4 moles of [tex]H_2O[/tex] / 7 moles of O2)

Moles of water vapor [tex](H_2O)[/tex] = 4.83 mol × (4/7)

Moles of water vapour[tex](H_2O)[/tex] = 2.77 mol (rounded to two decimal places)

to know more about water vapour here:

brainly.com/question/20899075

#SPJ1

The volume of chlorine gas at 46.0°C and 1.60 atm that is needed to react completely with 5.20 g of sodium to form NaCl is 1.85 L

We'll begin by obtaining the mole of 5.20 g of sodium. Details below:

Mole = mass / molar mass

Mole of Na = 5.20 / 23

Mole of Na = 0.226 mole

Next, we shall determine the mole of chlorine gas needed. Details below:

2Na + Cl₂ -> 2NaCl

From the balanced equation above,

2 moles of Na reacted with 1 mole of Cl₂

Therefore,

0.226 mole of Na will react with = (0.226 × 1) / 2 = 0.113 mole of Cl₂

Finally, we shall determine the volume of chlorine gas, Cl₂ needed. This is shown below:

PV = nRT

1.6 × V = 0.113 × 0.0821 × 319

Divide both sides by 1.6

V = (0.113 × 0.0821 × 319) / 1.6

V = 1.85 L

Thus, the volume of chlorine gas, Cl₂ needed is 1.85 L

Learn more about volume:

https://brainly.com/question/21838343

#SPJ1

Answer: NA = no of molecules / no of moles

NA = no of molecules × molecular weight /weight

Explanation:

The term defined as a pollutant that is formed by a chemical reaction between a primary pollutant and another compound in the atmosphere (either natural or human-made) is "secondary pollutant".

Primary pollutants are directly emitted into the atmosphere from sources such as cars, factories, and power plants. Examples of primary pollutants include carbon monoxide (CO), sulfur dioxide (SO₂), and nitrogen oxides (NOₓ).

Secondary pollutants, on the other hand, are not directly emitted into the atmosphere, but are formed through chemical reactions between primary pollutants and other compounds in the atmosphere. Examples of secondary pollutants include ground-level ozone (O₃), which is formed through the reaction of NOₓ and volatile organic compounds (VOCs), and acid rain, which is formed through the reaction of SO₂ and NOₓ with water, oxygen, and other chemicals in the atmosphere.

The formation of secondary pollutants is often dependent on factors such as temperature, sunlight, and the presence of other chemicals in the atmosphere. Secondary pollutants can be just as harmful to human health and the environment as primary pollutants, and are an important consideration in air pollution control strategies.

To learn more about pollutants, here

https://brainly.com/question/28519286

#SPJ4

Without more information about the synthesis process and the specific substances used, it's difficult to say exactly what the solid or oil that was not soluble in hexanes might be. However, there are a few possibilities to consider.

One possibility is that the solid or oil is an impurity that was introduced during the synthesis process. For example, it could be a side product or a reactant that did not fully react with the adipoyl chloride. In this case, the substance may not be soluble in hexanes because it has different chemical properties than the desired product.

Another possibility is that the substance is a byproduct of the reaction between the adipoyl chloride and another substance, such as a solvent or a catalyst. In this case, the substance may not be soluble in hexanes because it has a different chemical structure than the desired product and is not compatible with hexanes.

Alternatively, it's possible that the solid or oil is a form of the adipoyl chloride itself. For example, if the adipoyl chloride was not fully purified or if it was synthesized using impure starting materials, it could contain other compounds that are not soluble in hexanes.

Overall, without more information about the synthesis process and the specific substances used, it's difficult to determine the exact nature of the solid or oil that was not soluble in hexanes. Further analysis, such as chromatography or spectroscopy, may be necessary to identify the substance and determine its origin.

The number of moles of bromine trifluoride needed to produce 23.2 L of fluorine gas according to the reaction would be 0.339 moles.

The balanced equation for the reaction is:

BrF3 → Br + 3F2

From the equation, we can see that 1 mole of BrF3 produces 3 moles of F2. Therefore, to calculate the number of moles of BrF3 needed to produce 23.2 L of F2 at 0°C and 1 atm, we need to use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

We can rearrange the ideal gas law to solve for n:

n = PV/RT

At 0°C (273 K) and 1 atm, the value of R is 0.08206 L·atm/mol·K. Substituting the values given, we get:

n = (1 atm) × (23.2 L) / (0.08206 L·atm/mol·K × 273 K)

n = 1.017 mol F2

Since 1 mole of BrF3 produces 3 moles of F2, we need 1/3 as many moles of BrF3:

n(BrF3) = 1.017 mol F2 × (1 mol BrF3 / 3 mol F2)

n(BrF3) = 0.339 mol BrF3

Therefore, 0.339 moles of BrF3 are needed to produce 23.2 L of F2 at 0°C and 1 atm.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1