a student dissolves of resveratrol in of a solvent with a density of . the student notices that the volume of the solvent does not change when the resveratrol dissolves in it.calculate the molarity and molality of the student's solution. round both of your answers to significant digits.molaritymolality

Given: NaOH, H₂SO₄. Wanted: Na₂SO₄.

Percent yield = (325 g / 355.1 g) × 100 = 91.5%

molar mass of Na₂SO₄ is 142.04 g/mol.

The mole ratio needed is 2:1 (two moles of NaOH react with one mole of H₂SO₄ to produce one mole of Na₂SO₄).

The molar mass of Na₂SO₄ is 142.04 g/mol.

To determine the theoretical yield, we need to first calculate the limiting reagent.

Using the mole ratio, we can calculate the number of moles of H₂SO₄ required to react with 5.00 moles of NaOH:

5.00 mol NaOH × (1 mol H₂SO₄ / 2 mol NaOH) = 2.50 mol H₂SO₄

Since we have 7.00 moles of H₂SO₄, it is in excess and NaOH is the limiting reagent.

The number of moles of Na₂SO₄ that can be produced is:

5.00 mol NaOH × (1 mol Na₂SO₄ / 2 mol NaOH) = 2.50 mol Na₂SO₄

The theoretical yield of Na₂SO₄ is:

2.50 mol Na₂SO₄ × 142.04 g/mol = 355.1 g Na₂SO₄

The percent yield is calculated by dividing the actual yield (325 g) by the theoretical yield (355.1 g) and multiplying by 100:

Percent yield = (325 g / 355.1 g) × 100 = 91.5%

learn more about stoichiometry here

https://brainly.com/question/16060223

#SPJ1

The primary benefit of using a collimator on a Rinn Bai instrument with the bisecting technique is that it helps to limit the size and shape of the x-ray beam, ensuring that only the area of interest is exposed to radiation.

This not only reduces the amount of radiation that the patient is exposed to, but also helps to improve the accuracy of the resulting image by reducing scatter and improving the overall contrast and clarity of the image.

In short, the collimator serves as a crucial tool for ensuring that the bisecting technique is performed safely and accurately. The collimator serves as a barrier that narrows the X-ray beam, limiting its spread and focusing it on the area of interest, thereby producing a sharper image with less scatter radiation.

To know more about radiation click here

brainly.com/question/13805452

#SPJ11

The primary benefit of using a collimator on a Rinn BAI instrument with the bisecting technique is that it helps reduce radiation exposure and improve image quality.

Using a collimator on a Rinn BAI instrument with the bisecting technique provides the following benefits:

1. Reduces radiation exposure: By limiting the X-ray beam size and shape to the area of interest, a collimator helps minimize the patient's exposure to radiation.

2. Improves image quality: A collimator helps produce sharper images by reducing scatter radiation, which can cause image blurring.

3. Enhances diagnostic accuracy: By producing high-quality images with less radiation exposure, a collimator helps dental professionals make accurate diagnoses and treatment decisions.

In summary, the primary benefit of using a collimator on a Rinn BAI instrument with the bisecting technique is the reduction of radiation exposure and improvement in image quality, leading to better patient care and more accurate diagnoses.

To know more about collimator on a Rinn BAI instrument :

https://brainly.com/question/31543222

#SPJ11

The number of moles of H₂ that can be produced from x grams of Mg is (x / 24.31)

The balanced chemical equation for the reaction between Mg and HCl is,

Mg + 2HCl → MgCl₂ + H₂

This equation shows that 1 mole of Mg reacts with 2 moles of HCl to produce 1 mole of H₂. Therefore, the number of moles of H₂ that can be produced from x grams of Mg can be calculated as follows:

Calculate the number of moles of Mg in x grams:

Number of moles of Mg = mass of Mg / molar mass of Mg

Number of moles of Mg = x / 24.31

Use the mole ratio between Mg and H₂ to calculate the number of moles of H₂ produced:

Number of moles of H₂ = Number of moles of Mg × (1 mole of H₂ / 1 mole of Mg)

Number of moles of H₂ = (x / 24.31) × (1/1)

To know more about moles, here

brainly.com/question/26416088

#SPJ4

The volume of the sample of wood is 110.9 mL.

Volume is the measure of the amount of space which is occupied by an object or the substance. It is usually expressed in units such as liters, milliliters, cubic meters, or cubic centimeters. The volume of a solid can be calculated by measuring its dimensions and using mathematical formulas, while the volume of a liquid can be measured directly using a graduated cylinder or a pipette.

To find the volume of the sample of wood, we can apply the following formula;

Density = Mass/Volume

Rearranging the formula, we get;

Volume = Mass/Density

Substituting the given values, we get:

Volume = 95.1 g / 0.857 g/mL

Volume = 110.9 mL

To know more about volume here

https://brainly.com/question/1578538

#SPJ4

For this exercise, the formula for calculating heat is needed

[tex]Q = m × c_{s} × ∆T [/tex]

In this case, we need to fInd the difference in temperature of the water, so

[tex]∆T = \frac{Q}{m × c_{s}} = \frac{1420 J}{155 g × 4,184 J/g °C} = 2,2 °C[/tex]

Since water accepts heat from the reaction, its temperature increases therefore the final temperature is

[tex]T_{f} = T_{0} + ∆T = 19,2 °C + 2,2 °C = 21,4 °C[/tex]

Superficial frostbite is a second-degree frostbite (a type of injury) and results in clear skin blisters.

Frostbite is damage of skin due to cold temperatures. The victim of frostbite is mostly unaware of it because a frozen tissue is numb. It can be cured but depends upon the stages of frostbite. There are three stages of frostbite as given below:

First stage is Frostnip, cause loss of feeling in skin occurs. Skin color becomes red and purple.

Second stage is Superficial Frostbite, cause clear skin blisters. Skin color changes from red to paler. A fluid-filled blister may appear 24 to 36 hours after color changing of skin

Third stage is Deep Frostbite, cause joints or muscles no longer work. Skin color changes to black and the area turns hard.

Redness or pain in any skin area maybe the first sign of frostbite.

Thus, when weather is very cold, stay indoors or dress in layers to prevent serious health problems.

Learn more about Frostbite here:

brainly.com/question/14460475

#SPJ11

Superficial frostbite is a type of frostbite that affects the outer layers of the skin and results in localized damage to the skin and underlying tissues. It is considered a mild form of frostbite and usually affects the fingers, toes, ears, nose, and cheeks.

The symptoms of superficial frostbite can include numbness, tingling, stinging, and burning sensations in the affected area. The skin may also appear pale or waxy and may be hard to the touch. In some cases, blisters may form several hours after rewarming the affected area.

If treated promptly and properly, superficial frostbite usually heals without complications. However, if left untreated, it can progress to deeper layers of tissue, leading to more severe frostbite and potential tissue damage.

For more question on Superficial frostbite click on

https://brainly.com/question/31453309

#SPJ11

The correct definition of work is: net force applied through a distance in order to displace an object.

In physics, work is defined as the energy transferred to or from any object by means of force acting on the object as it moves through displacement.

More specifically, work is calculated as the product of force acting on an object and distance the object is displaced, multiplied by cosine of the angle between the force and displacement. Mathematically, work can be expressed as W = Fd cos(theta), where W is work, F is the force, d is displacement, and theta is angle between the force and displacement vectors.

To know more about work, refer

https://brainly.com/question/28356414

#SPJ1

Neither A, B, C nor D. The equilibrium position will not be affected by the change in volume.

To determine how the equilibrium of the reaction 2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g) will shift if the volume of the container is decreased by one-half, we first need to calculate the reaction quotient Q.

The balanced chemical equation for the reaction is:

2 NO(g) + Cl₂(g) ⇌ 2 NOCl(g)

At equilibrium, the concentrations of the species are:

[NO] = 0.050 M

[Cl2] = 0.050 M

[NOCl] = 0.50 M

Using these values, we can calculate the value of the reaction quotient Q:

Q [tex]= [NOCl]^2 / ([NO]^2[Cl2])[/tex]= [tex](0.50)^2 / ((0.050)^2 x 0.050)[/tex] = 1000

Now we compare the value of Q to the equilibrium constant Kc:

Kc =[tex][NOCl]^2 / ([NO]^2[Cl2])[/tex] = 2000

Since Q < Kc, we can conclude that the reaction has not yet reached equilibrium and that the forward reaction will proceed to reach equilibrium.

When the volume of the container is decreased by one-half, the concentration of all species will increase due to the decrease in volume. According to Le Chatelier's principle, the reaction will shift in the direction that reduces the total number of moles of gas.

In this case, the reaction produces two moles of gas on the left-hand side and two moles of gas on the right-hand side, so the total number of moles of gas does not change. Therefore, the volume change will not have an effect on the equilibrium position.

Learn more about  equilibrium here:

https://brainly.com/question/30807709

v

#SPJ11

The correct answer is: C. Q = 1000, and the reaction will proceed toward reactants.

To determine which statement is true if the volume of the container is decreased by one-half, we need to calculate the reaction quotient (Q) for the new conditions.

When the volume is decreased by half, the concentrations of all species will double:

NO(g): 0.050 * 2 = 0.100 M
Cl2(g): 0.050 * 2 = 0.100 M
NOCl(g): 0.50 * 2 = 1.00 M

Now, calculate Q using the new concentrations:

Q = [NOCl]^2 / ([NO]^2 * [Cl2])
Q = (1.00)^2 / ((0.100)^2 * (0.100))
Q = 1 / 0.001
Q = 1000

So, Q = 1000. Now, compare Q to Kc:

Q > Kc, meaning the reaction will proceed toward the reactants to reach equilibrium.

To know more about Reaction Quotient:

https://brainly.com/question/24202150

#SPJ11

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is the 5.9 × 10⁸ J.

The James Chadwick was discovered the neutron during the experiment involving the nuclear reaction in that the beryllium, bombarded with the alpha particles. The equation of the reaction is as :

⁴Be₉  +  ²He₄  ---->  ⁶C₁₂  +  ⁰n₁

(a) If one of the reaction products was the then unknown neutron, what was the other product is the C -12.

(b) The q-value of this reaction is as :

q = mc²

Where,

The m is the mass

The c is the speed of the light.

m = 4.002603 + 2.014102

m = 1.988501

q = 1.988501  × 3 × 10⁸

q = 5.9 × 10⁸ J

To learn more about James Chadwick here

https://brainly.com/question/14559793

#SPJ4

The given statement, if something is oxidized, it is formally losing electrons. if something is oxidized, it is formally losing electrons is true.

When something is oxidized, it means that it is undergoing a chemical reaction where it loses electrons. This process can be represented using oxidation numbers, which are used to keep track of the transfer of electrons between atoms during a reaction. In general, oxidation is defined as the process by which an atom, ion or molecule loses one or more electrons. This leads to an increase in the oxidation state of the atom, ion or molecule.

There are various examples of oxidation reactions that occur in everyday life. For instance, when iron rusts, it is undergoing an oxidation reaction where it loses electrons to oxygen in the air. Similarly, when a potato is cut and exposed to air, it turns brown due to an oxidation reaction between the oxygen in the air and the enzymes in the potato. In both cases, the process of oxidation involves the loss of electrons from one substance to another.

know more about oxidation numbers here

https://brainly.com/question/29257381#

#SPJ11

The equator of the sun rotates faster than the poles.

The equator of the sun rotates faster than its poles. This is known as differential rotation, and it is due to the fact that the sun is not a solid body, but is composed of gas and plasma. The equatorial regions of the sun rotate faster because they are farther from the center of the sun, where the gravitational pull is stronger, and thus experience less resistance to their motion.

The period of rotation of the equator of the sun is shorter than that of the poles. The equator rotates once every 25.4 days, while the poles rotate once every 36 days.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

The reactivity of epoxides in nucleophilic substitution reactions depend on the high steric strain of the 3-membered ring.

Epoxides' reactivity in nucleophilic substitution processes is influenced by the 3-membered ring's high steric strain. In comparison to a 3-membered ring, a 5-membered ring experiences less steric strain. As a result, its reactivity is more comparable to that of noncyclic ether.

One nucleophile substitutes another in a family of organic reactions known as nucleophilic substitution reactions. It closely resembles the typical displacement reactions we observe in chemistry, in which a more reactive element displaces a less reactive element from its salt solution. The "leaving group" is the group that accepts an electron pair and displaces the carbon, while the "substrate" is the molecule on which substitution occurs. In its final state, the leaving group is a neutral molecule or anion.

Learn more about Nucleophilic substitution:

https://brainly.com/question/29382322

#SPJ4

Complete question:

Would you expect the reactivity of a five-membered ring ether such as tetrahydrofuran to be more similar to the reactivity of an epoxide or to the reactivity of a noncyclic ether? Why?

The reactivity of tetrahydrofuran (THF), a five-membered ring ether, to be more similar to the reactivity of an epoxide than to the reactivity of a noncyclic ether.

This is because both THF and epoxides have a strained three-membered ring that is highly reactive due to ring strain, whereas noncyclic ethers do not have this strain.

Additionally, the oxygen atom in THF and epoxides is more electrophilic due to the ring strain, making them more reactive in nucleophilic reactions. Therefore, THF is likely to react more quickly and selectively in reactions that involve the opening of the ether ring compared to noncyclic ethers.

Based on the terms provided, I would expect the reactivity of a five-membered ring ether such as tetrahydrofuran (THF) to be more similar to the reactivity of a noncyclic ether rather than an epoxide.

This is because THF has a larger ring size compared to an epoxide, which reduces the ring strain and makes it less reactive. Noncyclic ethers also have reduced strain compared to epoxides, making their reactivities more similar.

To learn more about tetrahydrofuran  click here

brainly.com/question/28689261

#SPJ11

The fact that you did not use 10.0 ml of water and diethyl ether in the extraction step may have resulted in the product not being separated from the aqueous phase.

If the extraction step was intended to separate the product from the aqueous phase, using only 10.0 ml of water and no diethyl ether may not be sufficient for effective separation. Diethyl ether is often used as an organic solvent in extractions because it has a lower density than water and is immiscible with it, allowing for the separation of organic compounds from aqueous solutions. Without diethyl ether, the product may not be effectively extracted from the aqueous solution and may remain dissolved or suspended in the water.

If the extraction step was intended to purify the product or remove impurities, using only 10.0 ml of water may not be enough to fully dissolve the product. This could result in incomplete extraction of the product from the organic phase, leaving some of the product behind.

If the product is sensitive to water or undergoes hydrolysis in the presence of water, using only 10.0 ml of water may result in the decomposition of the product. In this case, it is possible that no product would form from the reaction or any product that did form would be converted to a different compound, such as p-cresol.

To learn more about diethyl ether

https://brainly.com/question/30364751

#SPJ4

Complete question:

What might be the result of you had used 10.0 ml of water and no diethyl ether in the extraction step?

A - no product would form from the reaction.

B - the product would not have been separated from the aqueous phase.

C - the product would precipitate out of solution.

D - any product formed would immediately be converted to p-cresol.

Answer:

Answer (Detailed Solution Below)

Explanation:

Option 3 : Substance in solid phase has the least entropy.

The volume of 4.50 moles of nitrogen gas at STP is approximately 101 L. So, the correct answer is 101 L.

At STP (standard temperature and pressure), the volume of one mole of any gas is 22.4 liters. Therefore, to find the volume of 4.50 moles of nitrogen gas at STP, we can simply multiply the number of moles by the molar volume:

At STP (Standard Temperature and Pressure), the volume of 4.50 moles of nitrogen gas (N2) can be calculated using the ideal gas law:

PV = nRT

Where P is the pressure (which is 1 atm at STP), V is the volume, n is the number of moles, R is the gas constant, and T is the temperature (which is 273.15 K at STP).

Rearranging this equation to solve for V, we get:

V = (nRT)/P

Substituting the values for n, R, P, and T, we get:

V = (4.50 mol x 0.08206 L atm K^-1 mol^-1 x 273.15 K)/1 atm

V = 101.3 L

For such more questions on STP:

https://brainly.com/question/27100414

#SPJ11

The correct statements are:
1. Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.
2. Anions of nonmetals tend to be isoelectronic with a noble gas.

Nonmetals do not tend to form anions and nonmetals tend to form anions by losing electrons to form a noble gas configuration are not true statements. Nonmetals do tend to form anions by gaining electrons to achieve a stable, noble gas configuration. Anions of nonmetals often have the same number of electrons as a noble gas, making them isoelectronic with that noble gas. Nonmetals do not tend to form anions by losing electrons, as they typically have a higher electronegativity and therefore attract electrons towards themselves rather than giving them up.

Therefore, the correct answer would be the first and third statements.

Learn more about noble gas configuration at https://brainly.com/question/28585122

#SPJ11

Nonmetals tend to form anions by gaining electrons to form a noble gas configuration.

Anions of nonmetals tend to be isoelectronic with a noble gas.

Nonmetals have a tendency to gain electrons in order to form anions, since this allows them to achieve a noble gas electron configuration. This is particularly true for nonmetals located on the right-hand side of the periodic table, such as the halogens. In contrast, metals tend to lose electrons to form cations.

Anions of nonmetals typically have the same number of electrons as a noble gas atom with the next higher atomic number. This means that they are isoelectronic with the noble gas, and have a stable electronic configuration. For example, the chloride ion (Cl-) is isoelectronic with argon.

It is not true that nonmetals do not tend to form anions by losing electrons, as this would result in a cationic species.

Learn more about isoelectronic  here:

https://brainly.com/question/6807313

#SPJ11

If you mix a solution containing 1.98 moles of solute with another solution containing 4.2 moles of solute, the resulting solution would have a total of 6.18 moles of solute and, assuming ideal behavior and STP conditions.

Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, unit of measurement most frequently used to express solution concentration.

The following procedures can be used to estimate the total volume of the resultant solution using the ideal gas law, assuming that the two solutes are acting optimally:

Count the total moles of solute there are in the solution.

Total moles of solute = 1.98 moles + 4.2 moles = 6.18 moles

Convert the total number of moles to volume using the ideal gas law:

V = (nRT) / P

Assuming standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm, respectively, you can calculate the volume as follows:

V = (6.18 mol x 0.08206 L⋅atm/(mol⋅K) x 273.15 K) / 1 atm

V = 13.8 L.

To know more about solute visit:-

https://brainly.com/question/8851236

#SPJ1

Question:

How the volume of a solution that contains 1.98 moles of a solute when mixed with 4.2 moles of a different solute?

The number of moles of acid and base that react depends on the stoichiometry of the chemical reaction and the amounts of reactants used

Without additional information about the chemical reaction or system being referred to, we cannot determine the number of moles of acid and base that reacted.

If we assume that the orange spheres represent sulfate ions in a specific reaction, then we would need to know the stoichiometry of the reaction to determine the number of moles of acid and base that reacted.

For example, if the reaction involved sulfuric acid ([tex]H_2SO_4[/tex]) and sodium hydroxide (NaOH) and the orange spheres represent sulfate ions ([tex](SO_4)^{2-[/tex]), then the balanced chemical equation would be:

[tex]H_2SO_4 + 2NaOH - > Na_2SO_4 + 2H_2O[/tex]

In this case, we would need to know the amount of sodium hydroxide used to determine the number of moles of acid and base that reacted. If we know the number of orange spheres representing sulfate ions and the amount of sodium hydroxide used, we can determine the moles of acid and base that reacted.

For such more questions on Stoichiometry:

https://brainly.com/question/30417834

#SPJ11

According to Boyle's law, which states that the pressure of an ideal gas is inversely proportional to its volume when the temperature and moles of gas are held constant, we can use the formula:

The new volume of the gas (V2) is approximately 7.22 L.

Given:

Initial volume (V1) = 36.0 L

Initial pressure (P1) = 382 torr

Final pressure (P2) = 1910 torr

Since the gas is ideal and there is no change in temperature or moles of gas, we can use Boyle's Law, which states that the pressure and volume of a given amount of gas are inversely proportional at constant temperature.

Mathematically, Boyle's Law is represented as:

P1 * V1 = P2 * V2

Plugging in the given values, we can solve for the new volume (V2):

382 torr * 36.0 L = 1910 torr * V2

V2 = (382 torr * 36.0 L) / 1910 torr

V2 ≈ 7.22 L

So, the new volume of the gas (V2) is approximately 7.22 L.

Learn more about “ Boyle's law,  “ visit here;

https://brainly.com/question/1437490

#SPJ4

In a reaction between an acid chloride and a primary alkyl chloride with a nucleophile, the acid chloride is generally more reactive than the primary alkyl chloride due to the presence of the electron-withdrawing carbonyl group in the acid chloride.

For example, if we react an acid chloride like acetyl chloride (CH3COCl) with a nucleophile like water (H2O), we get the following reaction:

CH3COCl + H2O → CH3COOH + HCl

In this reaction, the acetyl chloride reacts with water to form acetic acid (CH3COOH) and hydrochloric acid (HCl) as a byproduct. This reaction is an example of an acyl substitution reaction, where the nucleophile (water) substitutes the leaving group (chloride) on the acid chloride.

On the other hand, if we react a primary alkyl chloride like ethyl chloride (CH3CH2Cl) with water (H2O), we get the following reaction:

CH3CH2Cl + H2O → CH3CH2OH + HCl

In this reaction, the ethyl chloride reacts with water to form ethanol (CH3CH2OH) and hydrochloric acid (HCl) as a byproduct. This reaction is an example of a nucleophilic substitution reaction, where the nucleophile (water) substitutes the leaving group (chloride) on the primary alkyl chloride.

The rate of reaction for the acyl substitution reaction with the acid chloride is generally faster than the rate of reaction for the nucleophilic substitution reaction with the primary alkyl chloride, indicating the greater reactivity of the acid chloride.

Visit to know more about Carbonyl group:-

brainly.com/question/13564853

#SPJ11

The theoretical yield of phenacetin is 0.17922 g. However, the actual yield may be lower due to factors such as incomplete reaction, loss during purification, or experimental error.

To calculate the theoretical yield of phenacetin, we need to first determine the limiting reagent. The limiting reagent is the reactant that will be completely consumed in the reaction, thus limiting the amount of product that can be produced.

First, we need to convert the volume of bromoethane given in milliliters to grams, using its density:

0.12 ml x 1.47 g/ml = 0.1764 g bromoethane

Next, we can use the molar masses of p-acetamidophenol and bromoethane to determine the number of moles of each:

moles p-acetamidophenol = 0.151 g / 151.16 g/mol = 0.001 mol

moles bromoethane = 0.1764 g / 108.97 g/mol = 0.00162 mol

Since the reaction requires a 1:1 molar ratio of p-acetamidophenol to bromoethane, and the number of moles of p-acetamidophenol is smaller than the number of moles of bromoethane, p-acetamidophenol is the limiting reagent.

The theoretical yield of phenacetin can be calculated using the molar mass of phenacetin and the number of moles of p-acetamidophenol:

moles phenacetin = 0.001 mol p-acetamidophenol

mass phenacetin = 0.001 mol x 179.22 g/mol = 0.17922 g

For such more questions on Phenacetin:

https://brainly.com/question/29460577

#SPJ11

Since PbCl2 is insoluble, a precipitate will form when mixing 0.015 mol of NaCl and 0.15 mol of Pb(NO3)2 in a 1.0 L solution.

To determine if a precipitate will form, we need to check the solubility rules. In this case, we are interested in whether NaCl and Pb(NO3)2 will react to form any insoluble products. Here are the steps to determine that:

1. Write the balanced equation for the reaction:
NaCl (aq) + Pb(NO3)2 (aq) → NaNO3 (aq) + PbCl2 (s)

2. Identify the solubility rules:
- All nitrates (NO3-) are soluble.
- All sodium (Na+) salts are soluble.
- Chlorides (Cl-) are generally soluble, except for silver (Ag+), lead (Pb2+), and mercury (Hg2+) salts.

3. Apply the solubility rules to the products:
- NaNO3 is soluble because it contains sodium (Na+) and nitrate (NO3-).
- PbCl2 is insoluble because it is a chloride (Cl-) salt containing lead (Pb2+).

Since PbCl2 is insoluble, a precipitate will form when mixing 0.015 mol of NaCl and 0.15 mol of Pb(NO3)2 in a 1.0 L solution.

to learn more about precipitate click here:

brainly.com/question/30763500

#SPJ11

The amino acid that contains the R groups that are hydrophobic are the non - polar.

The Amino acids are the building blocks of the molecules of the  proteins. These contains the one hydrogen atom and the one amine group, the one carboxylic acid group and the one side chain that is the R group will be attached to the central carbon atom.

The side chains of the non polar amino acids includes the long carbon chains or the carbon rings, which makes them bulky. These are the hydrophobic, that means they repel the water. Therefore the non-polar amino acids are the hydrophobic.

To learn more about amino acid here

https://brainly.com/question/12788134

#SPJ4

The pH of the solution after the addition of 10.0 mL of base is 3.35.

The balanced chemical equation for the reaction between nitrous acid and sodium hydroxide is:

HNO2 + NaOH → NaNO2 + H2O

Before any base is added, the nitrous acid solution is acidic, and so the pH is less than 7. The nitrous acid dissociates in water according to the following equilibrium:

HNO2 + H2O ⇌ H3O+ + NO2-

The equilibrium constant for this reaction is the acid dissociation constant, Ka, which is given by:

Ka = [H3O+][NO2-] / [HNO2]

At equilibrium, the concentration of nitrous acid that has dissociated is equal to the concentration of hydroxide ions that have been neutralized by the acid:

[HNO2] - [OH-] = [NO2-]

Initially, the concentration of nitrous acid in the solution is:

[HNO2] = 0.100 mol/L × 0.0400 L = 0.00400 mol

When 10.0 mL of 0.200 M sodium hydroxide solution is added, the number of moles of hydroxide ions added is:

[OH-] = 0.200 mol/L × 0.0100 L = 0.00200 mol

Using the stoichiometry of the balanced equation, the number of moles of nitrous acid that have reacted is also 0.00200 mol.

The concentration of nitrous acid remaining in the solution after the addition of base is:

[HNO2] = (0.00400 mol - 0.00200 mol) / 0.0500 L = 0.0400 mol/L

The concentration of nitrite ion in the solution is equal to the concentration of hydroxide ions that have been neutralized by the acid:

[NO2-] = [OH-] = 0.00200 mol / 0.0500 L = 0.0400 mol/L

The acid dissociation constant for nitrous acid is Ka = 4.5 × 10^-4 at 25°C.

Using the expression for the equilibrium constant, we can solve for the concentration of hydronium ions:

Ka = [H3O+][NO2-] / [HNO2]

[H3O+] = Ka × [HNO2] / [NO2-] = 4.5 × 10^-4 × 0.0400 mol/L / 0.0400 mol/L = 4.5 × 10^-4

Therefore, the pH of the solution after the addition of 10.0 mL of sodium hydroxide solution is:

pH = -log[H3O+] = -log(4.5 × 10^-4) = 3.35

So the pH of the solution after the addition of 10.0 mL of base is 3.35.

Click the below link, to learn more about Titration:

https://brainly.com/question/2728613

#SPJ11

To reach the third equivalence point, 38.4 ml of 0.200 M KOH must be added to 17.5 ml of 0.231 M H3PO4.

Thus, we must calculate the moles of H3PO4 and KOH, and then determine the amount of KOH required to equal the amount of H3PO4.

To calculate the number of moles of H3PO4, we must first determine the volume of the solution, which is 17.5 ml. We can then multiply the molarity of H3PO4 by the volume to find the number of moles of H3PO4 (0.231 mol/L x 17.5 ml = 4.21 moles).

To calculate the number of moles of KOH, we can multiply the molarity of KOH by the volume required to reach the third equivalence point (0.200 mol/L x x = 0.200 mol/L x x = x moles).

To determine the volume of KOH required to reach the third equivalence point, we can divide the number of moles of KOH by the molarity of KOH (x moles/0.200 mol/L = 38.4 ml).

Therefore, 38.4 ml of 0.200 M KOH must be added to 17.5 ml of 0.231 M H3PO4 to reach the third equivalence point.

To learn more about moles visit:

https://brainly.com/question/29367909

#SPJ4

The formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Atoms are composed of protons, neutrons, and electrons. The number of protons in an atom determines its atomic number and the element it represents. The electrons in an atom occupy different energy levels or shells, and these electrons participate in chemical reactions. The outermost shell of electrons, called the valence shell, is particularly important in chemical reactions because it determines the chemical properties of the atom.

When an atom gains or loses electrons, it becomes charged and is called an ion. The process of gaining or losing electrons is called ionization. When an atom loses one or more electrons, it becomes a positively charged ion called a cation. Cations have a smaller number of electrons than protons and have a net positive charge. For example, when the element sodium (Na) loses one electron, it becomes a sodium ion (Na+).

On the other hand, when an atom gains one or more electrons, it becomes a negatively charged ion called an anion. Anions have a larger number of electrons than protons and have a net negative charge. For example, when the element chlorine (Cl) gains one electron, it becomes a chloride ion (Cl-).

The formation of ions is a fundamental process in many chemical reactions. Ions can combine with each other to form ionic compounds, which are compounds composed of ions held together by electrostatic forces. For example, sodium ions (Na+) and chloride ions (Cl-) can combine to form sodium chloride (NaCl), which is common table salt.

Overall, the formation of ions is an essential process in chemistry and is involved in many chemical reactions and compounds.

Visit to know more about Compound:-

brainly.com/question/26487468

#SPJ11

The pH of a 1 x 10^5 M KOH solution is 5.0.

pH is a measure of the acidity or basicity (alkalinity) of a solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in a solution:

pH = -log[H+]

A pH value of 7 is considered neutral, meaning that the concentration of hydrogen ions and hydroxide ions in the solution is equal (10^-7 M). A pH value below 7 indicates an acidic solution, meaning that the concentration of hydrogen ions is higher than the concentration of hydroxide ions. A pH value above 7 indicates a basic (or alkaline) solution, meaning that the concentration of hydroxide ions is higher than the concentration of hydrogen ions.

The pH of a solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution.

For a strong base like KOH, we can assume that it completely dissociates in water, producing equal amounts of hydroxide ions (OH-) and potassium ions (K+). Therefore, the concentration of hydroxide ions in a 1 x 10^5 M KOH solution is also 1 x 10^5 M.

Using the formula above, we can calculate the pH of the solution as:

pH = -log(1 x 10^-5)

pH = -(-5)

pH = 5

Therefore, the pH of a 1 x 10^5 M KOH solution is 5.0.

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ9

16 moles of NH3 are required to produce 12 moles of NH4Cl.

Given the balanced equation:

3Cl2 + 8NH3 → N2 + 6NH4Cl

To determine how many moles of NH3 are required to produce 12 moles of NH4Cl, we can use the stoichiometry of the equation. We can see that 6 moles of NH4Cl are produced from 8 moles of NH3.

Follow these steps:

1. Write down the balanced equation:
  3Cl2 + 8NH3 → N2 + 6NH4Cl

2. Determine the stoichiometric ratio between NH3 and NH4Cl:
  8 moles of NH3 : 6 moles of NH4Cl

3. Calculate the moles of NH3 needed to produce 12 moles of NH4Cl using the stoichiometric ratio:
  (8 moles of NH3 / 6 moles of NH4Cl) * 12 moles of NH4Cl = 16 moles of NH3

16 moles of NH3 are required to produce 12 moles of NH4Cl.

Learn more about moles here:

https://brainly.com/question/15833820

#SPJ11

Given the equation 3[tex]Cl_{2}[/tex] + 8[tex]NH_{3}[/tex] = [tex]N_{2}[/tex] + 6 [tex]NH_{4}Cl[/tex], 16 moles of [tex]NH_{3}[/tex] are required to produce 12 moles of  [tex]NH_{4}Cl[/tex].

To know how many moles of [tex]NH_{3}[/tex] are required to produce 12 moles of  [tex]NH_{4}Cl[/tex], we can follow the steps below:

Step 1: Determine the mole ratio between [tex]NH_{3}[/tex] and  [tex]NH_{4}Cl[/tex] from the balanced equation. In this case, it is 8 moles of [tex]NH_{3}[/tex] to 6 moles of  [tex]NH_{4}Cl[/tex].

Step 2: Set up a proportion to find the moles of NH3 needed for 12 moles of  [tex]NH_{4}Cl[/tex]:
(8 moles [tex]NH_{3}[/tex] / 6 moles  [tex]NH_{4}Cl[/tex]) = (x moles [tex]NH_{3}[/tex] / 12 moles  [tex]NH_{4}Cl[/tex])

Step 3: Solve for x:
x moles [tex]NH_{3}[/tex] = (8 moles [tex]NH_{3}[/tex] / 6 moles [tex]NH_{4}Cl[/tex]) * 12 moles  [tex]NH_{4}Cl[/tex]

Step 4: Calculate x:
x moles [tex]NH_{3}[/tex] = (8/6) * 12 = 16 moles [tex]NH_{3}[/tex]

To know more about Stoichiometry:

https://brainly.com/question/29195098

#SPJ11

CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

The answer is (E) CH4.

Pi bonding refers to the sharing of electrons between two atoms that occurs when two atomic orbitals with parallel electron spins overlap. Pi bonds are formed by the sideways overlap of two p orbitals.

In the given options, all except CH4 have pi bonds:

(A) CO2 has two pi bonds between the carbon atom and the oxygen atoms.
(B) C2H4 has a double bond between the two carbon atoms, which consists of one sigma bond and one pi bond.
(C) CN− has a triple bond between the carbon and nitrogen atoms, consisting of one sigma bond and two pi bonds.
(D) C6H6 has six pi bonds due to the delocalized pi electron system in the benzene ring.

In contrast, CH4 has only sigma bonds between the carbon and hydrogen atoms, and no pi bonds.

Visit to know more about Sigma bonds:-

brainly.com/question/31377841

#SPJ11