A tank with a volume of 40 cuft is filled with a carbon dioxide and air mixture. The pressure within the tank is 30 psia at 70oF. It is known that 2 lb of carbon dioxide was placed in the tank. Assume that air is 80% nitrogen and 20% oxygen and use the ideal gas laws. Calculate ,

The correct responses are;

(i) Weight percent of nitrogen: 58.6%

Weight percent of oxygen: 14.65%

Weight percent of carbon dioxide: 29.59%

(ii) Volume percent of nitrogen: 64.38%

Weight percent of oxygen: 14.1%

Weight percent of carbon dioxide: 21.53%

(iii) Partial pressure of nitrogen: 19.314 psia

Partial pressure of oxygen: 4.23 psia

Partial pressure of carbon dioxide: 6.459 psia

(iv) Partial pressure of nitrogen: 19.314 psia

Partial pressure of oxygen: 4.23 psia

Partial pressure of carbon dioxide: 6.459 psia

(v) The average molecular weight is approximately 32.02 g/mole

(vi) At 20 psia, 60 °F, the density is 0.11275 lb/ft.³

At 14.7 psia, 60 °F, the density is 0.0844 lb/ft.³

At 14.7 psia, 32 °F, the density is 0.0892 lb/ft.³

(vii) The specific gravity of the mixture 0.169

Reasons:

The volume of the tank = 40 ft.³ = 1.132675 m³

Content of the tank = Carbon dioxide and air

The pressure inside the tank = 30 psia = 206843 Pa

The temperature of the tank = 70 °F ≈ 294.2611 K

Mass of carbon dioxide placed in the tank = 2 lb.

Percent of nitrogen in the tank = 80%

Percent of oxygen in the tank = 20%

(i) 2 lb ≈ 907.1847 g

Molar mass of carbon dioxide = 44.01 g/mol

Number of moles of carbon dioxide = [tex]\displaystyle \mathbf{ \frac{907.1847 \, g}{44.01 \, g/mol}} \approx 20.613 \, moles[/tex]

Assuming the gas is an ideal gas, we have;

[tex]\displaystyle n = \mathbf{\frac{206843\times 1.132674}{8.314 \times 294.2611} }\approx 95.7588[/tex]

The number of moles of nitrogen and oxygen = 95.7588 - 20.613 = 75.1458

Let x represent the mass of air in the mixture, we have;

[tex]\displaystyle \mathbf{ \frac{0.8 \cdot x}{28.014} + \frac{0.2 \cdot x}{32}}= 75.1458[/tex]

Solving gives;

x ≈ 2158.92 grams

Mass of the mixture = 2158.92 g + 907.1847 g ≈ 3066.1047 g

[tex]\displaystyle Weight \ percent \ of \ nitrogen= \frac{0.8 \times 2158.92}{3066.105} \times 100 \approx \underline{58.6 \%}[/tex]

[tex]\displaystyle Weight \ percent \ of \ oxygen = \frac{0.8 \times 2158.92}{3066.105} \times 100 \approx \underline{14.65\%}[/tex]

[tex]\displaystyle Weight \ percent \ of \ carbon \ dioxide = \frac{907.184}{3066.105} \times 100 \approx \underline{29.59\%}[/tex]

ii.

[tex]\displaystyle Number \ of \ moles \ nitrogen= \frac{0.8 \times 2158.92 \, g}{28.014 \, g/mol} \approx 61.65\, moles[/tex]

[tex]\displaystyle Number \ of \ moles \ oxygen= \frac{0.2 \times 2158.92 \, g}{32 \, g/mol} \approx 13.5\, moles[/tex]

Number of moles of carbon dioxide = 20.613 moles

Sum = 61.65 moles + 13.5 moles + 20.613 moles ≈ 95.763 moles

In an ideal gas, the volume is equal to the mole fraction

[tex]\displaystyle Volume \ percent \ of \ nitrogen= \frac{61.65}{95.763} \times 100 \approx \underline{64.38 \%}[/tex]

[tex]\displaystyle Volume \ percent \ of \ oxygen = \frac{13.5}{95.763} \times 100 \approx \underline{14.1\%}[/tex]

[tex]\displaystyle Volume \ percent \ of \ carbon \ dioxide = \frac{20.613 }{95.763} \times 100 \approx \underline{21.53\%}[/tex]

(iv) The partial pressure of a gas in a mixture, [tex]P_A = \mathbf{X_A \cdot P_{total}}[/tex]

Partial pressure of nitrogen, [tex]P_{N_2}[/tex] = 0.6438 × 30 psia ≈ 19.314 psia

Partial pressure of oxygen, [tex]P_{O_2}[/tex] = 0.141 × 30 psia ≈ 4.23 psia

Partial pressure of carbon dioxide, [tex]P_{CO_2}[/tex] = 0.2153 × 30 psia ≈ 6.459 psia

(v) The average molecular weight is given as follows;

[tex]\displaystyle Average \ molecular \ weight = \frac{3066.105\, g}{95.7588 \, moles} = 32.02 \, g/mole[/tex]

(vi) At 20 psia 70 °F, we have;

Converting to SI units, we have;

[tex]\displaystyle n = \frac{137895.1456\times 1.132674}{8.314 \times 294.2611} \approx 63.84[/tex]

The number of moles, n ≈ 63.84 moles

The mass = 63.84 moles × 32.02 g/mol  ≈ 2044.16 grams ≈ 4.51 lb

[tex]\displaystyle Density = \frac{4.51\ lb}{40 \ ft.^3} \approx \underline{0.11275\, lb/ft.^3}[/tex]

When the pressure is 14.7 psia = 101352.93 Pa, and 60 °F

[tex]\displaystyle n = \frac{101352.9\times 1.132674}{8.314 \times 288.7056} \approx 42.8247[/tex]

The mass = 47.8247 moles × 32.02 g/mol  ≈ 1531.35 grams = 3.376 lb.

[tex]\displaystyle Density = \frac{3.376 \ lb}{40 \ ft.^3} \approx \underline{ 0.0844\, lb/ft.^3}[/tex]

When the pressure is 14.7 psia = 101352.93 and 32 °F

[tex]\displaystyle n = \frac{101352.9\times 1.132674}{8.314 \times 273.15} \approx 50.5482[/tex]

The mass = 50.5482 moles × 32.02 g/mol  ≈ 1618.55 grams = 3.568 lb.

[tex]\displaystyle Density = \frac{3.568 \ lb}{40 \ ft.^3} \approx \underline{ 0.0892 \, lb/ft.^3}[/tex]

(vii) [tex]\displaystyle The \ specific \ gravity \ of \ the \ mixture \ = \frac{\frac{3066.1047\, g}{40 \, ft.^3} }{1.00} = \frac{\frac{6.7596 \, lbs}{40 \, ft.^3} }{1.00} \approx \underline{0.169}[/tex]

Learn more about partial pressure here:

https://brainly.com/question/19813237

A person has driven a car 180 m in 40 seconds. What is the car’s speed?

Find the mean deviation of the set of numbers
(a) 12, 6, 7, 3, 15, 10, 18,5

Technician A says that to start a fuel-injected car, the accelerator should be depressed
once. Technician B says that to start a car with a carburetor, do not touch the
accelerator pedal until the engine is running. Who is correct?
Technician A
Technician B
Both A and B
Neither Anor B

how many times greater is the value of the 2 of the 270413 than the valuce of the 2 in 419427?

Chemical engineering is one of the simpler fields in engineering.
True
False

Explain the conditions under which galvanic corrosion occurs

What is the first step in the decision-making process?

I need help finding a good selling for a 71 Ford mustang hardtop coupe price This isn't really a school question but it's the only place I know we're I can ask questions so I'll give it a go

what is the value of slip in the block rotor test? and why?​

Question 10 of 25: Select the best answer for the question. 10. In a series RC circuit, if the resistance is 8,000 ohms and X is 6,000 ohms, what is the impedance of the circuit O A. 8,600 ohms O B. 10,000 ohms O C. 14,000 ohms O D. 9,200 ohms Mark for review (Will be highlighted on the review page) << Previous Question Next Question >> M LL 5 - 1080 acer​

HELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HELPHELP HEL

Describe the first case where the power of synthesis was used to solve design problems.

A fully charged battery with 6 cells should indicate

Help! Please explain also. Thank you

As part of the overall systems engineering process, there are a variety of software development methods, but the three most common at DoD are the Waterfall Approach, the Incremental Approach, and the ______________ Approach.

The part of the circuit that converts electrical energy into other forms

why does my man bun not have its own erodynamics

How to make this circuit for simulating on Proteus.

The feedback looping system in a three-way catalytic converter serves to adjust