If a weight w is now placed on the same block and 4.87 n is needed to push them both at a constant velocity, then the weight of the additional weight is approximately 0.880 kg
When only the block is pushed, the force required to move it at a constant velocity is:
[tex]F_1 = \mu_1*N = 0.60 * (0.400 * 9.8 ) = 2.352 N[/tex]
Where μ₁ is the coefficient of friction between the block and the surface, N is the normal force acting on the block, and we have assumed that the coefficient of friction is the same regardless of whether the block is moving or not.
When the block and weight are pushed together, the force required to move them at a constant velocity is:
[tex]F_2 = \mu _2*N + (0.400 + w)*g[/tex]
Where μ₂ is the coefficient of friction between the block and the surface with the weight on top, and w is the weight of the additional weight. Since the system is moving at a constant velocity, the force required to push the system is equal to the force of friction plus the weight of the system, so we have:
[tex]F_2 = 4.87 N[/tex]
Substituting the known values, we get:
[tex]0.60 * (0.400* 9.8) + (0.400+w)*9.8 = 4.87 N[/tex]
Solving for w, we get:
[tex]w = \frac{(4.87 - (0.60 * (0.400 * 9.8)))}{(9.8)} - 0.400[/tex]
[tex]w = 0.880 kg[/tex]
Therefore, the weight of the additional weight is approximately 0.880 kg.
learn more about velocity here:
brainly.com/question/17127206
#SPJ4
6. object x of mass m travels toward object y of mass 2m in such a way that they collide. the table contains data about the velocities of object x and object y immediately before the collision and immediately after the collision. what are the change in momentum of the two-object system from immediately before the collision to immediately after the collision?
The change in momentum of the two-object system from immediately before the collision to immediately after the collision is m(v-V) + 2m(V-v).
The change in momentum of the two-object system from immediately before the collision to immediately after the collision can be determined using the following equation:
Change in Momentum = Final Momentum - Initial Momentum.
The initial momentum of object x is given by the formula: Mass x Velocity = mv, where m is the mass of object x and v is the velocity of object x immediately before the collision. The initial momentum of object y is given by 2mv, where 2m is the mass of object y and v is the velocity of object y immediately before the collision. The final momentum of object x is given by m(v-V) where m is the mass of object x, v is the velocity of object x immediately before the collision and V is the velocity of object x immediately after the collision. The final momentum of object y is given by 2m(V-v) where 2m is the mass of object y, V is the velocity of object y immediately after the collision and v is the velocity of object y immediately before the collision. The change in momentum = m(v-V) + 2m(V-v).Therefore, the change in momentum of the two-object system from immediately before the collision to immediately after the collision is given by m(v-V) + 2m(V-v).
To know more about change in momentum click here:
https://brainly.com/question/30157362
#SPJ11
Jack and Jill are maneuvering a 3200 kg boat near a dock. Initially the boat's position is <2, 0, 3> m and its speed is 1.6 m/s. As the boat moves to position <6, 0, 1> m, Jack exerts a force of <-440, 0, 220> N, and Jill exerts a force of <150, 0, 300> N.
How much work does Jack do?
WJack = J
How much work does Jill do?
WJill = 0 J (correct)
What is the final speed of the boat?
vf = m/s
Jack does -1967.4 J of work on the boat.
There are four steps to get the final value:
First, we can use the work-energy principle
This states that the net work done on an object is equal to its change in kinetic energy.
We can also use Newton's second law, which relates the net force on an object to its acceleration:
F = ma
where F is the net force acting on the boat,
m is its mass, and
a is its acceleration.
To calculate the net force, we need to add up the individual forces exerted by Jack and Jill:
F= Fjack+ Fjill
where Fjack is the force exerted by Jack, and Fjill is the force exerted by Jill.
The net force can be calculated as:
F = <-440, 0, 220> + <150, 0, 300>
= <-290, 0, 520> N
Second, The boat's acceleration can be calculated using Newton's second law:
F= ma
a = F / m
a = <-290, 0, 520> / 3200
a = <-0.0906, 0, 0.1625> m/s^2
Third, The boat's final velocity can be calculated using its initial velocity, its acceleration, and the displacement:
vf^2 = vi^2 + 2ad
where vi is the initial velocity,
a is the acceleration,
d is the displacement, and
vf is the final velocity.
The displacement can be calculated as:
d = |<6, 0, 1> - <2, 0, 3>
= |<4, 0, -2>
= sqrt(4^2 + 0^2 + (-2)^2)
= 4.47 m
Plugging in the values, we get:
vf^2 = (1.6 )^2 + 2 * (-0.0906 ) * 4.47
= 1.89
= 1.37 m/s
Therefore, the final speed of the boat is 1.37 m/s.
Fourth, To calculate the work done by Jack, we can use the formula:
W = F * d
where F is the force exerted by Jack, and
d is the displacement of the boat.
Plugging in the values:
W = <-440, 0, 220> * 4.47
W = -1967.4 J
Therefore, Jack does -1967.4 J of work on the boat.
For more reference to work done please refer to:
https://brainly.com/question/13662169
CQ6.07 Given: L = 26 mH (milli H) The inductor current i changes 9.1 A/ms (Amps per milli sec) for a short while. What is the voltage across the inductor during this period? VL = ?? V
The voltage across the inductor during the period when the current changes at 9.1 A/ms with an inductance of 26 mH is 236.6 V.
An inductor is an electrical component that stores energy in a magnetic field when a current passes through it. An inductor is a device that opposes any change in the current flowing through it. The inductor is represented by the symbol L and is measured in henries (H).
The difference in electrical potential between two points in a circuit is known as voltage. The unit of voltage is volts (V).
The voltage across an inductor can be calculated using the formula:
[tex]v = L(di/dt)[/tex]
where v is the voltage, L is the inductance, and [tex]di/dt[/tex] is the rate of change of current.
Substituting the given values, we get:
[tex]v = 26\ mH \times (9.1 \ A/ms)[/tex]
Note that the units for inductance and rate of change of current must be consistent, so we convert the inductance to henries (H) and the rate of change of current to amps per second (A/s):
[tex]v = 0.026\ H \times (9100 \ A/s)[/tex]
[tex]v = 236.6 \ V[/tex]
Therefore, the voltage across the inductor during this period is 236.6 V.
Learn more about inductance:
https://brainly.com/question/30216563
#SPJ11
Suppose you are standing on a skateboard or on in-line skates and you toss a backpack full of heavy books toward your friend. What do you think will happen to
you and why? Explain your answer in terms of Newton's third law of motion.
Answer: According to Newton's third law of motion, when you toss a backpack full of heavy books towards your friend while standing on a skateboard or in-line skates, there will be an equal and opposite reaction force acting on you, causing you to move in the opposite direction, which may be backward due to the conservation of momentum.
The sound level produced by one singer is 71.8 dB. What would be the sound level produced by a chorus of 45 such singers (all singing at the same intensity at approximately the same distance as the original singer)? Answer in units of dB.
The sound level produced by a chorus of 45 singers would be approximately 88.3 dB.
How to find the sound level produced by a chorus of 45 singers?Assuming that the sound level of each singer is independent and the same, the sound level produced by a chorus of 45 singers can be calculated using the following formula:
L2 = L1 + 10 log (N2/N1)
where:
L1 = the sound level of one singer = 71.8 dB
N1 = the number of singers in the original group = 1
N2 = the number of singers in the new group = 45
L2 = the sound level of the new group
Substituting the values in the formula, we get:
L2 = 71.8 + 10 log (45/1)
L2 = 71.8 + 10 log (45)
L2 = 71.8 + 16.5
L2 = 88.3 dB
Therefore, the sound level produced by a chorus of 45 singers would be approximately 88.3 dB, assuming all the singers are singing at the same intensity at approximately the same distance as the original singer.
Learn about sound level here https://brainly.com/question/15118883
#SPJ1
in which region are the temperatures and pressures at which it's possible to change the phase of x by raising or lowering the temperature?
The region in which it is possible to change the phase of x by raising or lowering the temperature is: phase transition region.
This region is typically marked by an increase in pressure and a decrease in temperature. Temperature and pressure are inversely proportional to one another within this region, meaning that as pressure increases, temperature decreases and vice versa.
The exact temperature and pressure at which the phase transition occurs depends on the type of material being transitioned and its individual characteristics. For example, water boils at 100°C and 1 atm of pressure while other substances may have different boiling points.
To know more about pressure refer here:
https://brainly.com/question/30673967#
#SPJ11
a ball is thrown upward from the ground with an initial speed of 35 m/s; at the same instant, another ball is dropped from a building 5.0 m high. after how long will the balls be at the same height?
The time taken by both balls to be at the same height is 1.02 seconds.
The time taken by two balls to be at the same heightGiven,Initial speed of the ball that is thrown upward from the ground, u = 35 m/s,Initial height of the ball that is dropped from a building, h = 5.0 m,Finding out the time taken by both balls to be at the same height,Time taken by ball that is thrown upward from the ground, t = ?
For the first ball (that is thrown upward from the ground), the acceleration, a = -9.8 m/s² (negative because it's going against the gravity).Using the formula of motion,S = ut + 1/2 at²where,S = height of the ball above the ground, t = time taken by the ball to reach that height, and u = initial speed of the ball that is thrown upward from the ground.
Here, h = S and u = 35 m/s, and a = -9.8 m/s². Then putting the values we get,h = ut + 1/2 at²5 = (35)t + 1/2 (-9.8)t²5 = 35t - 4.9t²----------------(1)Also, for the second ball (that is dropped from a building), the time taken to reach the ground can be found using the formula, h = 1/2gt². Here, h = 5.0 m.
Therefore,5 = 1/2 × (-9.8) × t²5 = -4.9t²t² = -5/-4.9t² = 1.02t = √1.02
Therefore, the time taken by both balls to be at the same height is 1.02 seconds.
Learn more about Speed
brainly.com/question/17661499
#SPJ11
Two loud speakers are 1.60 m apart. A person stands 3.00 m from one speaker and 3.50 m from other speaker.
What is the lowest frequency at which destructive interference will occur at this point if the speakers are in phase?
how much thermal energy in calories is absorbed by 750.0g of water when its temperature increases from 15.4c t 86.3c
750.0 g of water at a temperature of 15.4°C will absorb 9,117.2 calories of thermal energy to increase its temperature to 86.3°C. This can be calculated by using the specific heat formula:
Q = m * c * ΔT
where:
Q = thermal energy (calories)
m = mass of water (g)
c = specific heat (calories/g°C)
ΔT = change in temperature (°C)
Therefore:
Q = 750.0 g * 4.184 calories/g°C * (86.3°C - 15.4°C)
Q = 9,117.2 calories
Thermal energy is the energy generated in the form of heat. It is a type of kinetic energy that is produced by moving particles that makeup matter. The movement of molecules generates heat energy in the form of kinetic energy. The faster the molecules move, the more thermal energy is generated.
Read more about the topic of thermal energy:
https://brainly.com/question/19666326
#SPJ11
What type of element gains electrons in ionic bonding, and what type of charge will it create?
Explanation:
Nonmetals tend to gain electrons and become anions. For example, in Fig. 2.22 A, a neutral oxygen atom (O), with eight protons and eight electrons, gains two electrons. This gives it two more negative charges than positive charges and an overall charge of 2–.
the rotational speed of a flywheel increases by 40%. by what percent does its rotational kinetic energy increase? explain your answer.
The rotational kinetic energy of a flywheel increases by 80% when its rotational speed increases by 40%. This is because the rotational kinetic energy of a flywheel is directly proportional to the square of its angular velocity.
The rotational speed of a flywheel increases by 40%. The percentage increase in its rotational kinetic energy is approximately 96.8%. Suppose the initial rotational speed of the flywheel is n1 and the initial rotational kinetic energy is K.E.1. After the speed of the flywheel is increased by 40 percent, the new speed is n2 = n1 + 0.4n1 = 1.4n1.
Then the new kinetic energy K.E.2 of the flywheel is given by K.E.2 = (1/2)I(n2^2)where I is the moment of inertia of the flywheel.Since n2 = 1.4n1, we have [tex]K.E.2 = (1/2)I(1.96n1^2) = 0.98I(n1^2).[/tex].
Therefore, the percentage increase in the rotational kinetic energy of the flywheel is approximately 96.8%.
Read more about energy:
https://brainly.com/question/13881533
#SPJ11
which has a greater (magnitude of) linear momentum: a 1000 kg truck moving at 30 mph, or a 500 kg car moving at 60 mph?
Answer : A 1000 kg truck moving at 30 mph has a greater magnitude of linear momentum than a 500 kg car moving at 60 mph, due to the larger mass of the truck and the lower velocity of the truck.
The magnitude of linear momentum for an object is equal to the product of its mass and velocity. Therefore, a 1000 kg truck moving at 30 mph has a linear momentum of 30,000 kg-m/s, while a 500 kg car moving at 60 mph has a linear momentum of 30,000 kg-m/s as well. As the magnitudes of linear momentum for both the truck and car are equal, the truck has a greater linear momentum than the car.
This is because the truck has a larger mass than the car and is moving at a lower velocity. In other words, the higher mass of the truck counteracts its lower velocity, resulting in an overall greater linear momentum. This can be illustrated with the equation p = mv, where p is linear momentum, m is mass, and v is velocity.
Know more about linear momentum here:
https://brainly.com/question/27988315
#SPJ11
Two large parallel metal plates carry opposite charges. They are separated by 10 cm and p. D of 500 volts is applied on them. What is the magnitude of electric field strength between them? compute the work done by the field on a change of 2x10^-9 as it moves from higher to lower part?
(a) The magnitude of electric field in the region between the plates is [tex]\mathbf{9 , 2 5 0}$ $\mathrm{V} / \mathrm{m}$.[/tex]
(b) The magnitude of the force the field exerts on a particle with the given charge i[tex]s $2.22 \times 10^{-5} \mathrm{~N}$.[/tex]
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]
(d) the change of the potential energy is[tex]$8.88 \times 10^{-7} \mathrm{~J}$.[/tex]
(a) The magnitude of electric field in the region between the plates is calculated as;
[tex]$$\begin{aligned}& E=\frac{V}{d} \\& E=\frac{370}{40 \times 10^{-3}} \\& E=9,250 \mathrm{~V} / \mathrm{m}\end{aligned}$$[/tex]
(b) The magnitude of the force the field exerts on a particle with the given charge is calculated as follows;
[tex]$$\begin{aligned}& F=E q \\& F=9,250 \times 2.4 \times 10^{-9} \\& F=2.22 \times 10^{-5} \mathrm{~N}\end{aligned}$$[/tex]
(c) The work done by the field on the particle as it moves from the higher potential plate to the lower is calculated as follows;
[tex]$$\begin{aligned}& W=F d \\& W=2.22 \times 10^{-5} \times 40 \times 10^{-3} \\& W=8.88 \times 10^{-7} \mathrm{~J}\end{aligned}$$[/tex]
(d) the change of the potential energy is calculated as;
[tex]$$\begin{aligned}& \Delta U=q \Delta V \\& \Delta U=q\left(V_1-V_2\right)\end{aligned}$$$$\text { DeltaU }=2.4 \times 10^{-9}(370)$$$$\Delta U=8.88 \times 10^{-7} \mathrm{~J}$$[/tex]
Learn more about electric field
https://brainly.com/question/15170044
#SPJ4
Full Question: Two large, parallel, metal plates carry opposite charges of equal magnitude. They are separated by a distance of 40.0 mm, and the potential difference between them is 370 V
A. What is the magnitude of the electric field (assumed to be uniform) in the region between the plates?
B. What is the magnitude of the force this field exerts on a particle with a charge of 2.40 nC ?
C. Use the results of part (b) to compute the work done by the field on the particle as it moves from the higher-potential plate to the lower.
D. Compare the result of part (c) to the change of potential energy of the same charge, computed from the electric potential.
a 60 kg dancer applies a horizontal force of -800 n on the dance floor. the dancer's acceleration will be
The acceleration of the dancer who applies a horizontal force of -800 N on the dance floor will be 13.33 m/s².
The formula used to calculate acceleration is as follows:F = m × a
where,F is the force,m is the mass, and,a is the acceleration
Substituting the given values in the above formula, we get:
-800 N = 60 kg × a
We can solve this equation for a, which will give us the acceleration of the dancer.
a = (-800 N) / (60 kg) = -13.33 m/s²
Therefore, the acceleration of the dancer will be 13.33 m/s².
To learn more about acceleration:
https://brainly.com/question/12550364#
#SPJ11
calculate the time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed.
The time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed is 0.5 seconds.
The difference in electric potential between two places is known as voltage, often referred to as electric pressure, electric tension, or (electric) potential difference. It translates into the amount of work required to move a test charge between two points in a static electric field. Volt is the name of the voltage-derived unit in the International System of Units.
A capacitor, for example, or an electromotive force can build up electric charge and increase the voltage between two places (e.g., electromagnetic induction in generator, inductors, and transformers).
Electrochemical reactions (such as those in batteries and cells), the pressure-induced piezoelectric effect, and the thermoelectric effect can all produce potential differences on a macroscopic level.
To calculate the time it takes for the voltage across the resistor to reach 10.0V after the switch is closed, you can use the formula
t = RC,
where R is the resistance in Ohms and C is the capacitance in Farads.
Using the given values, the time it will take to reach 10.0V is
t = 10 Ω * 0.05F
= 0.5 seconds.
Therefore, the time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed is 0.5 s.
For more such questions on voltage , Visit:
https://brainly.com/question/1176850
#SPJ11
a 4.0 kg body has two times the kinetic energy of an 8.5 kg body. calculate the ratio of the speeds of these bodies.
The ratio of the speeds of these bodies is 2.06
The kinetic energy of an object is equal to 1/2mv^2.
For the 4.0 kg body, the kinetic energy is 1/2 (4.0 kg)v^2
For the 8.5 kg body, the kinetic energy is 1/2 (8.5 kg)u^2
Given that the kinetic energy of the 4.0 kg body is twice the kinetic energy of the 8.5 kg body, we can set up the following equation:
1/2 (4.0 kg)v^2 = 2 * (1/2 (8.5 kg)u^2)
Simplifying the equation, we have:
2 (4.0 kg)v^2 = (8.5 kg)u^2
Solving for the ratio of the speeds, we get:
v^2/u^2 = (8.5 kg)/(2 (4.0 kg)) = 4.25
Therefore, the ratio of the speeds of the two bodies is equal to the square root of 4.25, which is approximately equal to 2.06.
So, the 4.0 kg body is moving at approximately 2.06 times the speed of the 8.5 kg body.
To know more about kinetic energy click here:
https://brainly.com/question/999862
#SPJ11
g what is the relationship between the wavelength of light, its color, and the energy of its photons?
Shorter wavelengths of light correspond to higher frequencies, and higher frequencies of light correspond to more energy in the photons. This means that the color of light is related to the energy of its photons: the higher the frequency of light, the higher the energy of its photons and the closer the color is to the blue end of the visible light spectrum.
The relationship between the wavelength of light, its color, and the energy of its photons is as follows:
The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. In simpler terms, the shorter the wavelength of light, the greater the energy of its photons, while the longer the wavelength of light, the less energy its photons possess. The relationship between the wavelength of light and its color is also direct in that different colors are a result of light waves of different wavelengths.
The color spectrum ranges from red (longest wavelength) to violet (shortest wavelength), with colors in between, such as orange, yellow, green, blue, and indigo. This spectrum represents the visible part of the electromagnetic spectrum, with ultraviolet and infrared light having shorter and longer wavelengths, respectively. The energy of photons from these parts of the spectrum follows the same pattern as visible light, with ultraviolet photons possessing more energy than visible light photons and infrared photons possessing less energy than visible light photons.
For more such questions on wavelengths , Visit:
https://brainly.com/question/10728818
#SPJ11
approximately how many neutrons are in a neutron star? neutron stars are composed almost entirely of neutrons and have approximately twice the mass of the sun.
Neutron stars with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons, are composed almost entirely of neutrons and have approximately twice the mass of the sun.
Neutron stars are composed almost entirely of neutrons and have approximately twice the mass of the sun. On average, neutron stars have about 1.4 solar masses, or 2.8 x [tex]10^3^0[/tex] kg. This means that one cubic centimeter of neutron star material has a mass of around 2.2 x [tex]10^1^4[/tex] kg. Each cubic centimeter of neutron star material contains about 1.6 x [tex]10^4^5[/tex] neutrons, or around one hundred trillion trillion neutrons. Thus, a neutron star with a mass of 1.4 solar masses will have around 1.8 x [tex]10^5^7[/tex] neutrons.
For more such questions on Neutron stars.
https://brainly.com/question/28271936#
#SPJ11
a 25 kg iron block that is initially at 350 c is dropped into an insulated tank that contains 100 kg of water at 18 c. no water changes phase or leaves the tank in the process. determine the total entropy change during this process. the cp,water
The total entropy change during this process is, -16.4 J/°C.
To determine the total entropy change during this process, we need to consider both the entropy change of the iron block and the entropy change of the water in the tank. We can assume that the entire process is adiabatic (i.e., no heat transfer occurs between the system and the surroundings), so the total entropy change of the system is zero.
The entropy change of the iron block can be calculated as,
ΔS_iron = m × Cp_iron × ln(T_f / T_i)
where m is the mass of the iron block, Cp_iron is the specific heat capacity of iron, T_f is the final temperature of the iron block, and T_i is the initial temperature of the iron block.
Assuming that the final temperature of the iron block is the same as the temperature of the water in the tank (i.e., 18°C), we can calculate the entropy change of the iron block as,
ΔS_iron = 25 kg × 0.45 J/g°C × ln(18°C / 350°C)
≈ -16.4 J/°C
The entropy change of the water in the tank can be calculated as,
ΔS_water = m × Cp_water × ln(T_f / T_i)
where m is the mass of the water in the tank, Cp_water is the specific heat capacity of water, T_f is the final temperature of the water, and T_i is the initial temperature of the water.
Assuming that the iron block and the water reach a final temperature of 18°C, we can calculate the entropy change of the water as,
ΔS_water = 100 kg × 4.18 J/g°C × ln(18°C / 18°C)
= 0 J/°C
Therefore, the total entropy change during this process is,
ΔS_total = ΔS_iron + ΔS_water
≈ -16.4 J/°C + 0 J/°C
≈ -16.4 J/°C
To know more about entropy change, here
brainly.com/question/29485944
#SPJ4
if you do not wear your required glasses or corrective lenses while driving and are stopped by police, you:
If you do not wear your required glasses or corrective lenses while driving and are stopped by police, you may face fines or penalties for violating the law.
Depending on the state, you could be fined or your license could be suspended. To avoid these consequences, it is best to always wear your corrective lenses or glasses while driving.
Additionally, driving without your required glasses or corrective lenses may put you and others on the road at risk of accidents, which could result in property damage, injuries, or even fatalities.
Therefore, it is highly recommended that you always wear your required glasses or corrective lenses while driving to ensure the safety of yourself and others on the road.
To learn more about lenses:
https://brainly.com/question/28052359#
#SPJ11
What is the transfer of thermal energy called?
Answer:
Conduction
Explanation:
The process by which heat energy is transmitted through collisions between neighboring atoms
what quantity describes the ability of a force to rotate an object? how does it differ from a force? on what quantities does it depend?
The quantity that describes the ability of a force to rotate an object is torque. It differs from a force in that it is a rotational force, not a linear force. Torque depends on the force applied and the distance from the point of application to the pivot point.
Torque is the measure of the ability of a force to cause rotational motion. It is defined as the product of the force and the distance between the point of application of the force and the pivot point or axis of rotation. Unlike a linear force, which produces linear motion, a torque produces rotational motion. The unit of torque is the newton-meter (N·m) in the SI system.
Learn more about pivot point at: https://brainly.com/question/29515099
#SPJ11
suppose you have an atwood machine with two different masses m and m. what are the external forces acting on this system?
The external forces acting on this system are: gravity and the tension in the string.
An Atwood machine is a system consisting of two masses, m, and m, connected by a string that passes over a pulley. In this system, the external forces are gravity and the tension in the string. Gravity pulls both masses downward, while the tension in the string acts in opposite directions on the two masses, pulling the heavier one down and the lighter one up.
The tension in the string is determined by the masses m and m and the acceleration of the system. If m is the heavier mass and m is the lighter mass, the tension in the string will be greater than if both masses had the same weight. This is because the tension must balance the gravitational forces on the two masses. The greater the mass, the greater the gravitational force, and the greater the tension in the string must be to balance it.
The acceleration of the system is determined by the masses, the tension in the string, and the amount of friction in the system. The greater the tension, the greater the acceleration, and the smaller the mass, the greater the acceleration. Friction acts against the acceleration, reducing the net acceleration of the system.
In summary, the external forces acting on an Atwood machine with two different masses m and m are gravity and the tension in the string. The tension in the string is determined by the masses and the acceleration of the system, while the acceleration is determined by the masses, the tension in the string, and the amount of friction in the system.
To know more about gravity refer here:
https://brainly.com/question/14874038#
#SPJ11
a 170-hz sound travels through pure helium. the wavelength of the sound is measured to be 5.92 m. what is the speed of sound in helium?
The speed of sound in pure helium is approximately 1006.4 m/s.
When a sound wave travels through a medium, it produces a series of compressions and rarefactions in the medium, which causes the particles of the medium to vibrate. The speed of sound in a particular medium depends on the physical properties of the medium, such as its density, elasticity, and temperature.
The speed of sound in helium can be calculated using the formula,
speed of sound = frequency x wavelength
Given that the frequency of the sound is 170 Hz and the wavelength is 5.92 m, we can plug in these values and get,
speed of sound = 170 Hz x 5.92 m
speed of sound = 1006.4 m/s
To know more about sound, here
brainly.com/question/17095610
#SPJ4
a load of 12 kg stretches a spring to a total length of 15 cm, and a load of 30 kg stretches it to a length of 18 cm. find the natural (unstretched) length of the spring.
The natural length of the spring is therefore 12.97 cm.
The natural length of the spring is found by calculating the spring constant using the Hooke's law formula. Spring constant (k) = Force (F) / extension (x). The natural length of the spring refers to the length of the spring when it is not carrying any load. Hooke's law states that the force required to extend or compress a spring by a distance x is proportional to that distance. Mathematically, F=kx, where F is the force applied, x is the displacement from the equilibrium position, and k is the spring constant. To find the natural length of the spring, we need to calculate the spring constant.
To do this, we use the data given in the problem. A load of 12 kg stretches the spring to a total length of 15 cm. We can find the force applied by multiplying the load by the acceleration due to gravity (g), which is 9.8 m/s^2. Thus, F = mg = 12 * 9.8 = 117.6 N. The extension of the spring is given as x = 15 cm - x0, where x0 is the natural length of the spring. Thus, x = 0.15 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 117.6/(0.15 - x0)
Similarly, when a load of 30 kg stretches the spring to a length of 18 cm, we can find the force applied as F = mg = 30 * 9.8 = 294 N. The extension is given as x = 0.18 m - x0. Substituting these values into Hooke's law, we get: k = F/x = 294/(0.18 - x0)
Now we have two equations for k, so we can set them equal to each other: 117.6/(0.15 - x0) = 294/(0.18 - x0) Cross-multiplying and simplifying, we get: 117.6(0.18 - x0) = 294(0.15 - x0) 21.168 - 117.6x0 = 44.1 - 294x0 176.4x0 = 22.932 x0 = 0.1297 m
The natural length of the spring is therefore 12.97 cm.
For more such questions on Hooke's law.
https://brainly.com/question/30611861#
#SPJ11
a ball with a mass of 2.20 kg is moving with velocity (6.60i-2.40j) m/s. find the net work on the ball if its velocity changes to (8i 4.00j)m/s
The net work on the ball if its velocity changes to (8i 4.00j)m/s is 27.60 Joules.
Using the work-energy principle, we know that the net work done on the ball is equal to the change in its kinetic energy.
To find the change in kinetic energy, we need to calculate the ball's final velocity and its initial velocity, and then use the formula:
Change in Kinetic Energy = (1/2) x mass x (final velocity)² - (1/2) x mass x (initial velocity)²
The net work done on the ball is 27.60 Joules.
So, when the ball changes its velocity from (6.60i-2.40j) m/s to (8i+4.00j) m/s, the net work done on it is 27.60 Joules.
To practice more questions about 'net work done':
https://brainly.com/question/30668135
#SPJ11
one of the forks is known to vibrate at 588.0 hz. what are the possible vibration frequencies of the second tuning fork?
The other tuning fork will vibrate at either 293.0 Hz or 884.0 Hz, as these are the two frequencies that are an octave away from 588.0 Hz.
Assuming that the second tuning fork is identical to the first one, the possible vibration frequencies of the second tuning fork can be determined based on the principle of resonance.
When two tuning forks of the same frequency are placed near each other, the sound waves produced by one fork will cause the other fork to vibrate at the same frequency, resulting in a resonance effect.
The frequency of the first tuning fork is given as f1 = 588.0 Hz.
The frequency of the second tuning fork (f2) that will produce resonance with the first tuning fork can be calculated using the formula:
f2 = nf1
where n is a positive integer (1, 2, 3, ...) representing the harmonic number.
Therefore, the possible vibration frequencies of the second tuning fork are:
For n = 1, f2 = 1 × 588.0 Hz = 588.0 Hz
For n = 2, f2 = 2 × 588.0 Hz = 1176.0 Hz
For n = 3, f2 = 3 × 588.0 Hz = 1764.0 Hz
and so on.
Note that in practice, the second tuning fork may not be identical to the first one, and there may be slight variations in the vibration frequencies due to factors such as manufacturing tolerances, temperature, and humidity.
Learn more about vibration frequencies at: https://brainly.com/question/26082584
#SPJ11
The possible vibration frequencies of the second tuning fork are 1176 H.
What is a tuning fork?A tuning fork is a tool that produces a pure musical tone when struck. The tone is usually the musical note that corresponds to the tool's vibration frequency. The tines on a tuning fork are constructed of a long steel rod that has been forged into the shape of a U. The tines are then cut to the proper length and shape to allow them to vibrate at a certain frequency.
One of the forks is known to vibrate at 588.0 Hz. The possible vibration frequencies of the second tuning fork are multiples of 588.0 Hz. When two tuning forks are struck, they will vibrate in sympathy with one another if their vibration frequencies are the same or a multiple of the same frequency. Therefore, the possible vibration frequencies of the second tuning fork are 588.0 Hz × 2 = 1176 Hz.
For more information about tuning fork refers to the link: https://brainly.com/question/13032605
#SPJ11
Seventh grade QQ.4 Commas with coordinate adjectives 5L5
Insert one comma to separate the coordinate adjectives.
Typical golf caddie responsibilities include carrying clubs, cleaning balls,
calculating distances and scores, and even replacing the divots-pieces of
grass and dirt that have been cut loose by the swift forceful strikes of golf
clubs.
Answer:
Typical golf caddie responsibilities include carrying clubs, cleaning balls,
calculating distances and scores, and even replacing the divots - pieces of
grass and dirt that have been cut loose by the swift, forceful strikes of golf
clubs.
a 30kg mass is placed on a 15cm spring and compressed to 12cm how much work is required to compress spring from 12cm to 10 cm
The final answer are work required to compress the spring from 12 cm to 10 cm is 19.6 J.
The spring's energy and the work it does are both proportional to the amount it stretches or compresses. According to Hooke's Law, the force needed to stretch or compress a spring is proportional to the amount it is stretched or compressed.
Given the spring constant and the total energy stored in the spring, one may figure out how much energy is necessary to compress the spring from a particular point to another using this method. What is the work required to compress the spring from 12 cm to 10 cm?
The work required to compress the spring from 12 cm to 10 cm is calculated using the following formula; W=1/2 k (x_2^2 - x_1^2) where W is the work done by the spring ,k is the spring constant,x1 is the initial position, andx2 is the final position.
Determine the spring constant using the formula, F=kx k=\frac{F}{x}k=\frac{mg}{x} k=\frac{30*9.8}{0.15} k=1960\ N/m Since the spring is being compressed, the value of x2 is smaller than x1.
To find the value of work done by the spring when compressed from x1 to x2, the difference between the potential energies corresponding to these positions is taken.
Thus, the work done by the spring is: W=1/2 k (x_2^2 - x_1^2) W=1/2 (1960) (0.12^2 - 0.10^2) W=19.6\ J
Thus, the work required to compress the spring from 12 cm to 10 cm is 19.6 J.
To know more about spring refer here:
https://brainly.com/question/14670501#
#SPJ11
A long solenoid has 100 turns/cm and carries current i. an electron moves within the solenoid in a circle of radius 2.30 cm perpendicular to the solenoid axis. the speed of the electron is 0.0460c (c speed of light). find the current i in the solenoid.
The current in the solenoid becomes 3.56 A.
How to find current in the solenoid?
Number of turns in the solenoid, n = 100 turns/cm
Radius of the circular path of electron, r = 2.30 cm
Speed of electron, v = 0.0460c, where c is the speed of light
To find: Current in the solenoid, i
Formula used: Magnetic field inside the solenoid,
B = μ0ni Where, μ0 = 4π × 10⁻⁷ T m/A is the permeability of free spaceSolution:
The force on a moving electron in a magnetic field is given by
F = Bev
Where B is the magnetic field, e is the charge of an electron and v is its velocity.
The force acting on the electron provides the necessary centripetal force for the electron to move in a circle of radius r.
So,
Bev = (mev²)/r
where me is the mass of an electron
On simplifying the above equation, we get
Be = (mev)/r
Put the value of B from the formula of magnetic field inside the solenoid, B = μ0ni
we get
μ0ni = (mev)/r
Solve for i,
i = (mev)/(μ0nr)
Substitute the given values and solve
i = (9.109 × 10⁻³¹ kg × 0.0460c × 3 × 10⁸ m/s)/(4π × 10⁻⁷ T m/A × 100 turns/cm × 2.30 cm)i
= 3.56 A
Therefore, the current in the solenoid is 3.56 A.
Learn more about Magnetic field.
brainly.com/question/14848188
#SPJ11