After moving down a group in the periodic table, the number of valence electrons

Answer:

Because it only needs one more electron to get to a full valence shell (8), so it really wants it and is pulling other electrons in. It also has to do with needing one more electron to fill the 2p shell. It is a small element which means its electrons are pulled tightly to the nucleus.

Hope this helps!

Explanation:

Answer:

Sodium is placed in group 1 of the periodic table of Alkali metals, and has a valence shell with one electron, making them very reactive. When placed in water, it disperses heat and begins to ignite and burn (due to its very reactive nature), resulting compound is hydrogen gas (H2), and a very strong base (Sodium Hydroxide, NaOH) used for cleaning appliances and for neutralizing agents.

Silver is placed on the transitional metal section of the periodic table, not quite reactive but is the most conductible element on the planet, is malleable and ductile. Due to it being costly and its rarity, it's not relied on for computer parts or wires. Silver doesn't actually directly react with water in its liquid state. It does produce hydrogen gas and Silver Oxide when reacting with water vapour.

In short, Sodium and water create new products, while Silver and water (only in water's gaseous form) form different products.

Answer:

chemical change energy can neither be created nor destroyed.

Explanation:

the rule of law of conversion states that energy can only be converted from said energy to another. it cannot be created and destroyed.

Answer:

D. Neither created nor destroyed

Explanation:

The law of conservation of energy states that energy is neither created nor destroyed.

It would take 211 hours to plate 28.3 g of silver on a flute.

The equation of the reaction;

Ag^+(aq) + e -----> Ag(s)

We know that 1 F of electricity is required to deposit 107.87 g of Ag. Also 1F = 96500 C

Now;

Since  107.87 g is deposited by 96500 C of electricity

28.3 g is deposited by  28.3 g ×  96500 C/ 107.87 g

= 25317 C

Also;

Q = It

I = current

t = time

25317 C =  2.0 amps × t

t = 25317 C /2.0 amps

t = 12658.5 seconds or 211 hours

Learn more about electrolysis: https://brainly.com/question/12054569

Answer:

Explanation:

Electrolysis equation is:

[tex]Ag1+ + 1e- ------> Ag[/tex]

1 mol of Ag requires 1 mol of electron

1 mol of electron = 96485 C

So,

1 mol of Ag requires 96485 C

let us calculate mol of element deposited:

molar mass of Ag = [tex]107.87 g/mol[/tex]

number of mol of Ag, [tex]n = \frac{mass of Ag}{molar mass of Ag}[/tex]

[tex]n = \frac{28.3}{107.87}\\\\n = 0.2623 mol[/tex]

[tex]total charge = mol of element deposited * charge required for 1 mol\\\\total charge = 0.2623*9.649*10^4\\\\total charge = 2.531*10^4 C[/tex]

Therefore,

[tex]time = \frac{Q}{i}\\\\= \frac{2.531*10^4}{2}\\\\= 1.265*10^4 seconds\\\\= 3.515 hr[/tex]

For more information, visit

https://www.homeworklib.com/qaa/1142722/5-how-long-would-it-take-to-electroplate-a-flute

Answer:0.284ib/in 3

Explanation:

[tex]\text{Given that,}\\\\\text{Density of iron, }~ \rho = 7 ~\text{g cm}^{-3} = 7 \times 10^{3}~ \text{kg m}^{-3}\\\\\\\text{Mass, m =14 g =} ~ 14 \times 10^{-3} ~\text{kg}\\\\\\\text{Volume of iron,}~ V = \dfrac{m}{\rho} = \dfrac{14 \times 10^{-3}}{7\times 10^{3}} = 2 \times 10^{-6} ~~ m^3[/tex]

Answer:

Technically only AJ got it correct Howie got it wrong because rotting is a chemical not a physical change AJ  was correct becuase he knew what would make the fruit go faster so yes howie would have been right if he got the right kind change.

Explanation:

hope this help

I think it's metal if its abt science

Answer:

i think metal or glass not sure but i think its metal

Explanation:

Answer:

b) (i): 0.91 Amgstroms

(ii): 9.1 × 10^-11 Angstroms

(c): Volume = 20 Angstroms

Explanation:

• Let's first convert the units:

[tex]{ \rm{1 \:nanometre = 1 \times {10}^{ - 9} \: metres} } \\ { \rm{10 \: angstroms = 1 \times {10}^{ - 9} \: metres}} \\ { \rm{1 \: micrometer = 1 \times {10}^{ - 6} \: metres = 1000 \: nm}} \\ \\ { \rm{1 \: {nm}^{3} = 1000 \: {angstroms}^{3} }}[/tex]

Question (b)

[tex]{ \rm{radius = \frac{diameter}{2} }} \\ \\ { \rm{radius = \frac{0.182}{2} }} \\ \\ { \rm{radius = 0.091 \: nm}} \\ \\ { \mathfrak{ answer{ : { \rm{radius = (0.091 \times 10) \: angstroms}}}}} \\ \\ { \rm{radius = 0.91 \: angstroms}}[/tex]

[tex]{ \rm{radius = 0.091 \: nm}} \\ \\ { \rm{radius = 0.091 \times( 1 \times {10}^{ - 9} ) \: metres}} \\ \\ { \rm{radius = 9.1 \times {10}^{ - 11} \: m }}[/tex]

[tex]{ \rm{volume = (0.5 \times 0.2) \: nm \times 0.0002 \: micrometer}} \\ \\ { \rm{volume = 0.5nm \times 0.2nm \times (0.0002 \times 1000)nm}} \\ \\ { \rm{volume = 0.5 \times 0.2 \times 0.2 \: nm {}^{3} }} \\ \\ { \rm{volume = 0.02 \: nm {}^{3} }} \\ \\ { \rm{volume = (1000 \times 0.02) \: angstroms {}^{3} }} \\ \\ { \rm{volume = 20 \: angstroms}}[/tex]

Answer:

If the numbers of each type of atom are different on the two sides of a chemical equationExplanation:

Answer:

The molecular structure affects solubility mainly biased on its polarity or bonded ions.

Explanation:

Polar molecules will better interact with the water molecules and will dissolve easier. Nonpolar molecules can dissolve if they are small enough, however they don't interact well with the polar molecules. Bonded ions, such as NaCl split into a cation Na and an anion Cl which the positive charge on the Na will be attracted to the oxygen, and the negatively charged Cl will be attracted to the positive Hydrogen.

**Remember this rule, like dissolves like, meaning nonpolar dissolves nonpolar and polar dissolves polar.

I hope this helps!

Answer:

I'm pretty sure this doesn't really connect with chemistry much but the answer should be Schedule 1 as stated by the Drug enforcement agency.

The material that has been widely used in casting has been copper. Thus, option C is correct.

Casting has been the process of molding the liquid into a specific shape with the mold. The casting involves the heating of elements and converting them into liquid. The liquid has been poured into the mold and cooling results in the casted material.

The casted material has been selected based on the boiling temperature, cooling temperature, resistivity, cost-effectiveness, and damping ability.

The material that has been consisted of these characteristics has been copper. Thus, copper has been commonly used for casting. Thus, option C is correct.

For more information about casting, refer to the link:

https://brainly.com/question/1253405

Answer:

AlCl3 + Fe = Al + FeCl2

Chemical Equation Details aluminum chloride + iron = aluminum + iron(ii) chloride

[tex]\text{Balanced reaction:}\\\\2\text{Al} + 3\text{FeCl}_2 \longrightarrow 3\text{Fe} + 2\text{AlCl}_3[/tex]

Answer:

N2 + H2 --> 2 NH

Explanation:

You need to add 2 to make it correct

1 atom Mg, 2 atoms O and 2 atoms H.

1 + 2 + 2 = 5, so correct answer is C

Answer:

6.02 × 10^23 molecules = 1 mole

5.27 × 10^45 molecules = x

x = 5.27 × 10^45/ 6.02 × 10^23 × 1

= 8.754 × 10^21 mol

I don't know if it's correct but based on the question that was the only way I saw how to work it out

Answer:

North pole-A

South pole- F

Equator- E

Polar Easterlies-C

Prevailing Westerlies-D or B-not sure

Trade Winds-D or B-not sure

Answer:

If the atoms are not identical, the electron distribution is electrons are closer to one atom than the other. This type of bond is called a(n) covalent bond.

Explanation:

Answer:

Yes

Explanation

I learned it in science class

Answer:

White being the color and coming in small grains.

Explanation:

Physical properties are something you can clearly see about the object.

Answer:

Hey mate......

Explanation:

This is ur answer....

It was in the lesson, the answer is it is solid and does not conduct electricity.

Physical Properties                                 Chemical Properties

White cubic crystals                                 Do not undergo combustion

Odorless, salty taste                                 Make ionic bonds easily

As solids, they do not conduct electricity  The product of mixing acids and bases.

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

150K is 253.67°F

Explanation:

There is a simple formula to convert from Kelvin to Celsuis;

C° = K - 273.15

Then you would convert Celsuis into Fahrenheit using the formula:

[tex]F = \frac{9}{5}C + 32\\[/tex]

The mass of a 0.513 mol of Al2O3 is 52.33g.

HOW TO CALCULATE MASS:

The mass of a substance can be calculated by multiplying the molar mass of the substance by its number of moles. That is;

mass of Al2O3 = no. of moles of Al2O3 × molar mass of Al2O3

According to this question, there are 0.513 moles of Al2O3.

Mass of Al2O3 = 0.513 × 102

Mass of Al2O3 = 52.33g

Therefore, the mass of a 0.513 mol of Al2O3 is 52.33g.

Learn more about mass calculations at: https://brainly.com/question/8101390?referrer=searchResults

Answer:Amplitude in a longitudinal wave

Explanation:Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is compressed by the wave. Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.

Answer:

34.9103 or 34.9 g

Explanation:

Remember Density is a broken heart: m/v.

In this scenario (Let x = # of grams in the sample of gasoline),

D = 0.7198 g/mL = x g / 48.5 mL

So,

(0.7198 g/mL) * (48.5 mL) = x g

x g = 34.9103 = 34.9 g (Accounting for Significant Figures)

Answer:

sugar and salt, as they can dissolve in water. Sugar and salt have a high solubility in water. So, sugar and salt can form a solution with water.

Explanation:

Answer:

maybe i can help for you where the question

Answer:

unbalanced

Explanation:

because it is REACTing.

Explanation:

Although all puppies are officially considered adult dogs once they reach one year old, puppies continue to grow in height and size while their bones are still developing, which takes anywhere from 6 to 24 months. Their skeletal growth is what determines how tall they will become as adults.

Answer:

8 i believe

Explanation:

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the number of neutrons in the given atom is 8.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Mass number =number of protons + number of neutrons

Atomic number = number of protons= number of electrons

18  =10 + number of neutrons

number of neutrons=8

Therefore, the number of neutrons in the given atom is 8.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2