An IC CS amplifier has Im 3 mA/V, Cgs = 25 fF, Cgd = 5 fF, Cų = 30 fF, Rsig 10 kl, and Rſ = 20 ks. Use the method of open-circuit time constants to obtain an estimate for fu. Also, find the frequency of the transmission zero fz

The maximum allowable value of P based on the stress that can act on the beam will be 750 lb.

From the information, the wood has an allowable normal stress of Ơallow-1. 5 ksi, and an allowable shear stress of Tallow 150 psi, and we want to determine the maximum allowable value of P that can act on the beam.

The maximum allowable value of P that can act on the beam will be:

= P × 13.75 / 54 × 3

= 1773.723lb

P max = 750 lb

Check the attachment for further details.

Learn more about stress on

https://brainly.com/question/154477

#SPJ4

A phrase-structure grammar for the set of all fractions of the form is given below.

A phrase structure grammar, expressed in Backus-Naur form, for the set of all fractions of the form a/b can be presented here; where a is treated as a signed integer expressed in decimal notation and b is deemed to be a positive integer.

It reads as follows:

<fraction> ::= <integer> '/' <positive-integer>

<integer> ::= <digit> | '-' <digit> | <digit> <integer>

<positive-integer> ::= <digit> | <digit> <positive-integer>

<digit> ::= '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9'

Learn more about grammar on

https://brainly.com/question/2353198

#SPJ1

To produce the intended output, we need to add a new line character after Line 2 and Line 4. This can be done by modifying the code as follows:

System. out.print("One"); // Line 1
System. out.print("Two\n"); // Line 2
System. out.print("Three"); // Line 3
System. out.print("Four\n"); // Line 4
This will produce the output:
OneTwo
ThreeFour

Intended output refers to the expected or desired result or outcome of a program, system, or process. It is the output that a developer or user expects to see when a particular input is given or a specific operation is performed.

In software development, the intended output of a program is usually defined in the form of requirements or specifications. These requirements outline what the program should do, what data it should process, and what results it should produce. Developers use these requirements to design and build the program and ensure that it produces the intended output when tested. In other fields, the intended output can refer to the desired result of a process or system. For example, the intended output of a manufacturing process might be a specific product with certain characteristics or specifications, while the intended output of an educational program might be students who have achieved certain learning outcomes or competencies. It is important to define the intended output clearly and precisely to ensure that the program or system meets its objectives and delivers the desired results.

Learn more about intended output here:

https://brainly.com/question/29993929

#SPJ11

Answer:

C aka ways to improve compliance and sustainability

Explanation:

In order to conduct a 28-day concrete compression test, a certain number of concrete cylinders must be taken. The exact number of cylinders that need to be taken depends on several factors, including the size of the concrete pour, the type of concrete being used, and the requirements of the testing agency or organization.

Typically, at least two cylinders are taken for each concrete pour, and sometimes more depending on the size and complexity of the project. These cylinders are then sent to a laboratory for testing, where they are placed under pressure to determine their compressive strength.

The number of cylinders taken also depends on the specific requirements of the testing agency. For example, some agencies may require three cylinders to be taken for each pour, while others may only require one or two.

Overall, it is important to follow the guidelines and requirements of the testing agency or organization to ensure accurate and reliable test results. Taking the appropriate number of concrete cylinders for each compression test can help ensure that the concrete meets the required standards for strength and durability.

Learn more about concrete here:

https://brainly.com/question/28903866

#SPJ11

Concrete should not be poured in temperatures less than 40°F (4°C). When the temperatures are too low, the concrete will not set properly and can become weak and prone to cracking. In addition, the curing time will be extended, which can delay the construction schedule.

When pouring concrete in cold weather, special measures must be taken to ensure that the concrete sets properly. This includes using heated water and aggregates, insulating the forms, and covering the concrete with blankets or other insulating materials to retain heat. It is also important to note that concrete can be adversely affected by extreme temperatures in both hot and cold weather. In very high temperatures, the concrete can dry out too quickly and become prone to cracking. Therefore, it is important to consider the temperature and weather conditions when planning a concrete pour and take appropriate measures to ensure that the concrete sets properly and remains strong over time.

Learn more about temperatures here-

https://brainly.com/question/11464844

#SPJ11

True. Unreinforced concrete, also known as plain concrete, is a type of concrete that does not have any reinforcement, such as steel bars or fibers, to resist tensile stresses.

As a result, it has a very low tensile strength compared to its compressive strength. In fact, the tensile strength of unreinforced concrete is typically only about one-tenth to one-twelfth of its compressive strength. Therefore, it is important to consider the effects of tensile stresses on structures made of unreinforced concrete, especially in areas prone to earthquakes or other natural disasters. It is also important to properly design and reinforce concrete structures to prevent failure due to tensile stresses. The compressive strength of concrete, on the other hand, refers to its ability to resist compressive forces and is measured in pounds per square inch (psi). The compressive strength of concrete varies depending on several factors such as the type of cement, water-cement ratio, curing conditions, and age of the concrete. However, it is generally higher than the tensile strength of concrete.

Learn more about natural disasters here-

https://brainly.com/question/932110

#SPJ11

The most common type of causal relationship in regards to health conditions is the one where multiple factors contribute to the development of the condition. This type of relationship is often referred to as a multifactorial or complex relationship.

It is believed that most health conditions, including chronic diseases such as heart disease and diabetes, have a multifactorial relationship. This means that there is not one single cause, but rather a combination of genetic, environmental, and lifestyle factors that contribute to the development of the condition. Understanding this complex relationship is important in developing effective prevention and treatment strategies for these health conditions. Many prevalent health issues, including diabetes, cancer, and heart disease, are thought to have a multifactorial causal relationship. Although addressing the different elements that contribute to these illnesses might be difficult, it is necessary for successful prevention and therapy.

Learn more about causal relationship here:

https://brainly.com/question/3223594

#SPJ11

The stage that conducts a test to verify that the code functions as intended is the testing stage. This stage is crucial in the software development lifecycle as it is where the code is thoroughly tested to ensure that it meets the specified requirements and performs as expected.

Testing can involve a range of techniques, including unit testing, integration testing, and acceptance testing, among others.

During testing, various scenarios are executed to simulate real-world usage and ensure that the software is functioning as intended. The objective is to detect and fix any bugs or defects in the code before it is deployed to production.

In summary, the testing stage is a critical phase in software development that helps ensure that the code functions correctly and meets the specified requirements. It is important to conduct thorough testing to avoid potential issues and ensure a high-quality end product.

Learn more about conducts here:

https://brainly.com/question/31364875

#SPJ11

The voltage is given as 0 volts

We have to apply at the Nodal at VA

We have

-3 + Va/R + Va/2 = 0

-3 + Va / 19 + Va / 2 = 0

3 = Va(21 / 38)

VA = 38 x 3 / 21

The voltage has a resitance of 2

Va / 2u

= (38 x 3 / 21) / 2

V2U =  38 x 3 / 21

Vc = -Va + V2u

= -  (38 x 3 / 21) +  (38 x 3 / 21)

Vc = 0

Hence The voltage vc is 0 V

Read more on voltage here:https://brainly.com/question/1176850

#SPJ4

The open-loop transfer function of a system is a mathematical representation of the relationship between the input and output of a system without any feedback.

Without the specific transfer function, it's impossible to sketch the bode magnitude and phase plots, or determine the gain and phase margins of the system.

The Bode plot is a graphical representation of the frequency response of a system, with the magnitude and phase components plotted on logarithmic frequency scales.

To sketch the Bode magnitude and phase plots, we first need to convert the transfer function to its standard form.

Then, we can identify the frequency response characteristics of the system, including the cutoff frequency, poles and zeros, and resonant frequencies.

Using this information, we can sketch the Bode magnitude and phase plots for the system.

To verify our plots using MATLAB, we can use the built-in functions "bode" and "margin.

The "bode" function calculates the magnitude and phase response of the system and plots it on a Bode diagram, while the "margin" function calculates the gain and phase margins of the system.

The system gain margin is the amount of gain that can be applied to the system before it becomes unstable, while the phase margin is the amount of phase shift that can be applied to the system before it becomes unstable.

These margins are important indicators of system stability and can be calculated using the MATLAB "margin" function.

For more questions on system

https://brainly.com/question/27927692

#SPJ11

False. Concrete is strong in compression but weak in tension.Concrete is a composite material made from cement, water, and aggregates such as sand, gravel, or crushed stone. It is widely used in construction due to its strength, durability, and versatility.

However, as mentioned earlier, concrete is weak in tension, meaning it can easily crack or break under tension or flexural stress. This is because concrete is a brittle material, and it does not have the ability to deform or stretch significantly before it fails.To address this weakness, reinforcement materials such as steel bars, wires, or fibers are added to create reinforced concrete, which has higher tensile strength than plain concrete. The reinforcement material is placed strategically in the concrete structure to provide additional strength and prevent cracks from forming or spreading. Reinforced concrete is widely used in various applications, including buildings, bridges, dams, and tunnels.Another method to address the weakness of concrete in tension is prestressing. This technique involves applying a compressive force to the concrete before it is subjected to tension, which effectively offsets the tension and increases the strength of the concrete.

Learn more about versatility about

https://brainly.com/question/26139725

#SPJ11

The solution is done below The strength is 720.833 kip .ft

Fy = 50

Fu = 65

Lp = 13.5 from the table 3-2

The plastic moment capacity

= 0.9 x 50 x 173

= 7785 kip.in

= 648.75 kip.ft

The design moment capacity

This is given as  648.75 kip.ft

The normal moment capacityy

= 50 x 173

= 720.833 kip .ft

Read more on  flexural strengthhere https://brainly.com/question/14434715

#SPJ4

True, increasing the concrete compressive strength of a concrete beam has a negligible effect on the ultimate capacity. The ultimate capacity of a concrete beam refers to the maximum load it can withstand before failing. It is primarily determined by the reinforcement (steel bars) within the beam, which carry the majority of the tensile stresses.

Concrete is a composite material that is strong in compression but weak in tension. When subjected to loads, concrete beams often fail due to tensile stresses before the full potential of their compressive strength is reached. As a result, the compressive strength of the concrete itself does not significantly influence the ultimate capacity of the beam.

Instead, it is the reinforcement ratio (the ratio of the area of steel bars to the total area of the beam) and the yield strength of the steel bars that have a greater impact on the ultimate capacity. By increasing the reinforcement ratio or using steel with higher yield strength, the beam can resist more tensile stresses, thereby increasing its ultimate capacity.

In summary, while concrete compressive strength is essential for overall concrete performance, it has a negligible effect on the ultimate capacity of a concrete beam, which is more influenced by reinforcement ratio and the steel bars' yield strength.

Learn more about concrete here:

https://brainly.com/question/28903866

#SPJ11

Sludge production is primarily dependent on the influent suspended solids load and the removal efficiency of the treatment process.

Based on the given operating characteristics, the daily primary sludge production for the WWTP can be calculated as follows:
Daily influent suspended solids load = Flow rate x Influent suspended solids concentration
= 2.00 [tex]m^{3}[/tex]/s x 179.0 mg/L
= 358.0 kg/d

Daily effluent suspended solids load = Daily influent suspended solids load x (100% - Removal efficiency)
= 358.0 kg/d x (100% - 47.0%)
= 190.06 kg/d
Daily primary sludge production = Daily influent suspended solids load - Daily effluent suspended solids load
= 358.0 kg/d - 190.06 kg/d
= 167.94 kg/d
The annual primary sludge production can be obtained by multiplying the daily production by the number of days in a year (365):
]Annual primary sludge production = Daily primary sludge production x 365
= 167.94 kg/d x 365
= 61,326.1 kg/yr
It is important to note that the specific gravity of fixed and volatile solids is not used in the calculation of sludge production. These parameters are typically used in the determination of sludge volume and mass, as well as in the estimation of biogas potential from sludge digestion.

Learn more about gravity here: https://brainly.com/question/31321801

#SPJ11

When a signal is sampled using an ideal impulse train, its frequency content is replicated at regular intervals in the frequency domain, separated by the sampling frequency.

When a signal is sampled using an ideal impulse train, the following occurs in the frequency domain:
Sampling:

The continuous-time signal is converted into a discrete-time signal by multiplying it with an ideal impulse train.

The ideal impulse train consists of equally spaced impulses (also known as Dirac delta functions), with a sampling period T.
Frequency domain representation:

The multiplication of the continuous-time signal with the ideal impulse train in the time domain corresponds to a convolution in the frequency domain.

This means that the original signal's frequency content is convolved with the frequency content of the impulse train.

Frequency domain result:

The convolution results in the original signal's frequency content being replicated at regular intervals in the frequency domain.

These intervals are separated by the sampling frequency (Fs), which is the reciprocal of the sampling period (Fs = 1/T). The replicated frequency content is also referred to as spectral images or aliases.

For similar question on frequency domain.

https://brainly.com/question/31150513

#SPJ11

The Incident Command System (ICS) marking system: This system is used to identify key areas and resources at an incident, and uses a combination of numbers and letters to denote different types of resources and their location within the incident area.

The Hazmat marking system: This system is used to identify the specific hazards present at a hazardous materials incident, and typically involves color-coded labels and placards that indicate the type of material and its level of danger.The triage marking system: This system is used to prioritize medical treatment for injured individuals at a mass casualty incident, and typically involves assigning different colored tags to victims based on the severity of their injuries and the likelihood of their survival.The search marking system: This system is used to indicate areas that have been searched for victims at a disaster site, and typically involves using colored spray paint or chalk to mark buildings or other structures that have been cleared.

To learn more about Command click the link below:

brainly.com/question/30319932

#SPJ11

A blocked passage preventing oil from returning back to the tank is a situation where the flow of oil in a system is obstructed, causing disruption in the circulation of the fluid. This can occur due to several reasons such as debris accumulation, mechanical failure, or even incorrect installation of components.

The passage is an essential part of the oil system as it allows for the smooth flow of oil throughout the system, facilitating efficient lubrication, cooling, and power transmission. When this passage becomes blocked, it hinders the oil from returning to the tank, leading to potential issues such as overheating, increased wear and tear, and reduced system performance.

To resolve a blocked passage, it is crucial to first identify the cause of the blockage. Inspecting the system for any visible debris, wear, or damage can provide valuable insights into the root of the problem. Once the cause is determined, appropriate measures such as cleaning, repair, or replacement of the affected components can be taken.

Regular maintenance and inspection of the oil system are essential to prevent blocked passages and ensure the optimal performance of the system. This includes checking and replacing filters, monitoring oil levels, and ensuring proper installation of all components. By taking these preventive measures, one can minimize the likelihood of blocked passages and maintain the smooth and efficient operation of the oil system.

Learn more about passage here:

https://brainly.com/question/26999874

#SPJ11

The oil pressure gauge measures the pressure of the oil being pumped through the engine's lubrication system. When you start the engine, the oil pressure gauge should typically come up to normal within a few seconds to a minute. This time frame allows the oil pump to circulate the oil and build up sufficient pressure in the system.

A normal reading on the gauge varies depending on the specific vehicle and engine type, but generally, it should be within the manufacturer's recommended range, which is often indicated on the gauge itself.

If the oil pressure gauge does not reach normal levels within this time frame, it may indicate an issue such as low oil levels, a malfunctioning oil pump, or a blockage in the oil passages. In such cases, it is essential to address the problem promptly to prevent engine damage due to insufficient lubrication.

Always consult your vehicle's owner's manual or a qualified professional for guidance on proper oil pressure levels and maintenance procedures.

Learn more about pressure here:

https://brainly.com/question/12971272

#SPJ11

Answer:

With an open center system, flow is continuous and pressure is intermittent – which is contrary to a closed center system where the flow is intermittent and the pressure continuous.

What is open hydraulic system?

An open loop hydraulic system is any system where all of the fluid starts at the reservoir and is returned to the reservoir. The pump takes in fluid from the reservoir, then sends the fluid to the valves and actuators, and then ultimately, back to the reservoir via a filter.

What is the main advantage of an open center hydraulic system?

It has the advantage of using a single central pump. Open-center hydraulics have more than one pump in stages that supply power to different applications as the needs arise. For example, in an open system, the tractor's steering and PTO would have separate pumps that supply the oil to make those important systems work.

Hope this helps :)

Pls brainliest...

The required inductance (in nl) to series resonate a load impedance of Z2 - 5-j80Q at an operating frequency of 5 GHz is 120.5 nH.

To solve for the required inductance (in nl) at an operating frequency of 5 GHz, we can use the formula for series resonance:
ω = 1/(LC)
where ω is the angular frequency (2πf), L is the inductance, and C is the capacitance. Since we are given Z2 = 5-j80Q, we can calculate the corresponding capacitance using:
C = 1/(ωZ2)
where ω is 2π(5x10^9) and Z2 is 5-j80Q.
Plugging in the values, we get:
C = 1/[(2π)(5x10^9)(5-j80)] = 0.1657 - j0.0026 nF
Now we can rearrange the formula for series resonance to solve for L:
L = 1/(Cω)
Plugging in the values, we get:
L = 1/[(0.1657-j0.0026)(2π)(5x10^9)] = 120.5 nH

Learn more about inductance here

https://brainly.com/question/16765199

#SPJ11

The solid crib configuration is a type of crib that is made entirely of solid materials, such as wood or metal, and has no movable or collapsible parts. One of the biggest advantages of this type of crib is its durability and sturdiness.

It is less likely to break or fail over time, ensuring the safety of the baby who sleeps in it. Additionally, the solid crib configuration is typically easier to assemble and disassemble than other types of cribs, such as those with drop-down sides. This makes it a great option for parents who frequently move or travel with their baby. Another advantage of the solid crib configuration is that it often provides better support for the mattress and allows for better airflow, which can improve the baby's comfort and safety. Overall, the solid crib configuration is a great choice for parents who prioritize safety, durability, and ease of use.

learn more about solid crib here:

https://brainly.com/question/30429146

#SPJ11

We can use the following formulas to calculate the ABCD parameters of the transmission line:

Where R is the resistance per unit length, X is the reactance per unit length, B is the shunt admittance per unit length, and j is the imaginary unit.Using the nominal p circuit, the ABCD parameters of the transmission line are:A = cosh(gamma * d) = cosh((1 + j) * Z0 * d) = 1.135 + 0.6872jB = Z0 * sinh(gamma * d) = Z0 * sinh((1 + j) * Z0 * d) = 389.7 + 238.2jC = (1 / Z0) * sinh(gamma * d) = (1 / Z0) * sinh((1 + j) * Z0 * d) = 0.002632 - 0.004508jD = cosh(gamma * d) = cosh((1 + j) * Z0 * d) = 1.135 + 0.6872jwhere gamma is the propagation constant, Z0 is the characteristiimpedance of the line, and d is the length of the line in kilometers.The characteristic impedance of the line isZ0 = sqrt((R + jX) / Y) = 155.64 ohmsThe resistance of the line isR = R0 * (T / T0)^α = 0.0181 * (508 + 273) / (20 + 273)^0.4 = 0.0247 ohms/kmwhere R0 is the resistance at a reference temperature of T0 = 20°C, T is the conductor temperature in °C, and α is the temperature coefficient of resistance.The sending-end voltage isVs = Vr + Ir * Z = 230 kV + (300 MW / (3 * 218 kV * 0.9)) * (cos(cos^-1(0.9)) + j * sin(cos^-1(0.9))) * 100 km * (1 + j) * 152.39 ohms/km = 249.68 + 33.594j kVwhere Vr is the receiving-end voltage, Ir is the receiving-end currentand cos^-1 is the inverse cosine function.The percent voltage regulation is:%VR = (|Vs| - |Vr|) / |Vr| * 100%(a) For power factor of 0.9 lagging:Ir = 300 MW / (3 * 218 kV * 0.9) * (cos(cos^-1(0.9)) - j * sin(cos^-1(0.9))) = 997.8 - 238.13j AVs = 248.31 + 31.44j kV%VR = (|248.31 + 31.44j| - |218|) / |218| * 100% = 13.96%(b) For a power factor of unity:

Ir = 300 MW / (3 * 218 kV) = 727.45 AVs = 229.48 + 8.982j kV%VR =

To learn more about  transmission  click on the link below:

brainly.com/question/15343694

#SPJ11

False. While the weight and stiffness of a building do play a role in how it will respond to seismic activity, it is not necessarily preferable for a building to be heavy and stiff in a high seismic region. In fact, heavy buildings can actually experience more severe damage during an earthquake due to the greater forces involved.

Instead, it is important for buildings to be designed with appropriate levels of stiffness and flexibility to effectively absorb and dissipate seismic forces. This can include features such as reinforced concrete walls and beams, and base isolation systems that separate the building from the ground to reduce the transfer of seismic energy.

Additionally, proper construction techniques and adherence to seismic building codes can also help to mitigate earthquake damage. Ultimately, the most important factor in reducing earthquake risk is careful planning and design based on a thorough understanding of the local seismic hazards.

Learn more about stiffness here:

https://brainly.com/question/31172851

#SPJ11

To assign the largest value to the variable max, we need to compare the values of the char * variables name1, name2, and name3.

However, since we are working with strings, we cannot simply use the greater than or less than operators. Instead, we need to use the strcmp() function, which compares two strings and returns an integer value indicating their relative position in alphabetical order. Here's a possible fragment of code that accomplishes the task:
char *max = name1; // initialize max to name1
if (strcmp(name2, max) > 0) { // compare name2 to max
   max = name2; // if name2 is greater, assign it to max
}
if (strcmp(name3, max) > 0) { // compare name3 to max
   max = name3; // if name3 is greater, assign it to max
}

In this code, we first initialize the variable max to the value of name1. Then, we use the strcmp() function to compare name2 and name3 to max. If either of them is greater, we update max to the corresponding variable. At the end of the code, max will contain the largest string among the three variables.

Learn more about operators here: https://brainly.com/question/30415374

#SPJ11

A safety factor in building construction allows for extra strength and durability to prevent structural failure. It typically ranges from 1.5:1 to 2.5:1.

In building construction, a safety factor refers to the extra capacity built into the design to ensure the structure can withstand loads and stresses beyond what it is expected to encounter in normal use. This includes factors such as wind, earthquakes, and other environmental forces. The safety factor is calculated by dividing the maximum load the structure can withstand by the actual load it is expected to bear. The resulting ratio, typically ranging from 1.5:1 to 2.5:1, ensures that the structure is strong enough to handle unexpected stress and prevent collapse. A higher safety factor provides greater assurance of structural integrity, but also increases construction costs.

learn more about construction here:

https://brainly.com/question/17948464

#SPJ11

The entropy of 2 moles of and ideal gas expanding freely to 3 times it's initial volume is 18.3J/k

The following formula is required:

∆S = nx R x ℓn x (Vf/Vi)

Where

n = number of moles of gas (n = 2)

R = gas constant (R = 8.314 J/(mol * K))
Vf = final volume (Vf = 3.V1)

Vi = intial volume

Vi = 1L (Asumption )

∆S = 2 x 8.314 x 1.099

∆S =18.3 j/K

Learn more about entropy:
https://brainly.com/question/13135498
#SPJ4

Translation:

Calculate the entropy of 2 moles of an ideal gas expanding freely to three times its initial volume, use: ∆S =n・R・ℓn (Vf / Vi)

The Strength of a beam is inversely proportional to its length, directly proportional to its width, and proportional to the square of its depth. This relationship is described by various engineering formulas, such as the bending moment formula for beams.

A longer beam will have lower strength due to increased bending moment and deflection, while a wider beam will have higher strength as it can distribute the load over a larger area. Additionally, the depth of the beam plays a significant role, as the square of the depth is directly proportional to the moment of inertia, which affects the beam's resistance to bending. These relationships are important considerations in structural design and analysis to ensure the safe and efficient performance of beams in various load-bearing applications.

learn more about Strength of a beam here:

https://brainly.com/question/26127221

#SPJ11

10 data points evenly spaced between 0 and 2 times the cutoff frequency (0 to 2fc) and calculate the impedance for each frequency using the above equations.

plot the impedance values on the y-axis and the frequency values on the x-axis to get the frequency response plot.

As an AI language model, I cannot see any circuit diagram or image you might have intended to attach.

I will provide you with some general information on RC low-pass filters.

In a simple RC low-pass filter, a resistor (R) and a capacitor (C) are connected in series.

The reactance of the capacitor and the impedance of the circuit can be calculated as follows:

Reactance of the capacitor:

Xc = 1 / (2πfC), where f is the frequency and C is the capacitance.

Impedance of the circuit:

Z = √(R² + Xc²)

The cutoff frequency of the filter is the frequency at which the reactance of the capacitor is equal to the resistance of the resistor, i.e. Xc = R.

The cutoff frequency can be calculated as follows:

Cutoff frequency:

fc = 1 / (2πRC)

To plot the frequency response of the filter, you can calculate the impedance of the circuit for different frequencies and plot them on a graph.

For similar questions on frequency

https://brainly.com/question/31417165

#SPJ11

the pressure in the tank indicated by a strain gage reading of 280*10^-6in/in is gotten as 1.421 MPa

Pressure is  described as the force applied perpendicular to the surface of an object per unit area over which that force is distributed.

Given values

angle B = 18 degrees  

cylindrical wall of the tank =  6mm thick

cylindrical wall of the tank= 600mm inside diameter

E = 200 GPa

and v = 0. 30.

pressure indicated by strain gauge σθ=Prt

substituting the values and solving

pressure  = 1.421 MPa

Learn more about pressure at:https://brainly.com/question/28012687

#SPJ1