The velocity of the object when it hits the Earth's surface depends only on the height from which it was dropped and the acceleration due to gravity.
The velocity of an object when it hits the Earth's surface can be calculated using the principle of conservation of energy. When the object is released from rest at a distance r0 from the Earth's center, it has an initial gravitational potential energy of mgh0, where g is the acceleration due to gravity and h0 is the height of the object above the Earth's surface.
As the object falls towards the Earth's surface, its potential energy is converted into kinetic energy. When it hits the Earth's surface, all of its potential energy has been converted into kinetic energy. Therefore, we can write:
[tex]mgh0 = (1/2)mv^2[/tex]
where v is the velocity of the object when it hits the Earth's surface.
Solving for v, we get:
v = sqrt(2gh0)
Learn more about The velocity
https://brainly.com/question/17127206
#SPJ4
A 60-kg swimmer suddenly dives horizontally from a 150-kg raft with a speed of 1. 5 m/s. The raft is initially at rest. What is the speed of the raft immediately after the diver jumps if the water has negligible effect on the raft?
The speed of the raft immediately after the diver jumps is 0.6 m/s.
After the swimmer jumps, the momentum of the system is still conserved, but it is no longer zero, since the swimmer is now moving. We can use the equation:
(m1v1 + m2v2)before = (m1v1 + m2v2)after
We want to solve for v2, velocity of the raft immediately after the jump.
Before jump, velocity of raft is zero, so we can simplify equation to:
m1v1 = m2v2
Substituting in values we know, we get:
60 kg * 1.5 m/s = 150 kg * v2
Simplifying, we get:
v2 = (60 kg * 1.5 m/s) / 150 kg = 0.6 m/s
So the speed of the raft immediately after the diver jumps is 0.6 m/s.
To know more about momentum, here
brainly.com/question/30677308
#SPJ4
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. this is called
As a planet orbits a star, it makes a big ellipse, but its gravity has a similar effect on the star, causing the star to make a small star. This is called the "gravitational wobble" or "stellar wobble".
As a planet orbits a star, it follows an elliptical path due to the gravitational pull of the star. The shape of the planet's orbit is determined by the balance between the gravitational force of the star and the planet's own motion. However, the planet's gravity also affects the star, causing it to move slightly in response to the planet's pull. This motion of the star is much smaller than that of the planet, but it is still measurable and can be observed. This phenomenon is known as the planet's gravitational influence on the star, which causes the star to wobble slightly. This effect is used by astronomers to detect and study exoplanets orbiting distant stars.
To learn more about gravitational wobble, refer:-
https://brainly.com/question/31168966
#SPJ11
The phenomenon that occurs when a planet orbits a star, causing both the planet and the star to make elliptical motions due to their mutual gravitational effects.
This phenomenon is known as the "wobble" or "stellar wobble" and is caused by the gravitational interaction between a planet and its star. As a planet orbits a star, it exerts a gravitational force on the star, causing it to move slightly in response. This movement results in a small, periodic shift in the star's spectral lines, which can be detected by astronomers.
By analyzing this shift, astronomers can determine the presence, size, and orbital characteristics of planets around other stars. At the same time, the planet's gravity also affects the star, causing the star to make a smaller elliptical motion in response. This mutual gravitational interaction results in the observed stellar wobble.
To know more about stellar wobble:
https://brainly.com/question/29542172
#SPJ11
A proton accelerates from rest in a uniform electric field of 691 N/C. At some time later, it’s speed is 2. 30 x 10^6 m/s. (a) What is the magnitude of its acceleration? (b) How long does it take the proton to reach this speed
(c) How far has it moved in this time interval?
(d) What is its kinetic energy at the later time?
Mass of proton: 1. 6726x10^-27
Fundamental charge:
1. 602 x10^-19
The proton experiences an acceleration of [tex]$6.60\times10^{10} \text{m/s}^2$[/tex] in a uniform electric field of 691 N/C, and it takes [tex]$3.48\times10^{-5}$[/tex] s to reach a velocity of [tex]$2.30\times10^{6}$[/tex] m/s. During this time, the proton travels a distance of [tex]$4.36\times10^{-10}$[/tex] m and has a kinetic energy of [tex]$3.07\times10^{-12}$[/tex] J.
(a) The magnitude of the acceleration experienced by the proton can be determined by using the equation for the force on a charged particle in an electric field, which is F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. For a proton, the charge is equal to the fundamental charge, which is [tex]$1.602\times10^{-19} \text{C}$[/tex]. Therefore, the force on the proton is [tex]$F = (1.602\times10^{-19} \text{C})(691 \text{N/C}) = 1.106\times10^{-16} \text{N}$[/tex]
The acceleration of the proton can be determined using the equation F = ma, where m is the mass of the proton. Thus, [tex]$a = F/m = \dfrac{1.106\times10^{-16} \text{N}}{1.6726\times10^{-27} \text{kg}} = 6.60\times10^{10} \text{m/s}^2$[/tex].
(b) To find the time it takes for the proton to reach the given speed, we can use the kinematic equation v = u + at, where u is the initial velocity (which is 0 m/s), v is the final velocity ([tex]$2.30\times10^{6} \text{m/s}$[/tex]), a is the acceleration ([tex]$6.60\times10^{10} \text{m/s}^2$[/tex]), and t is the time. Rearranging this equation gives [tex]$t = \dfrac{v-u}{a} = \dfrac{2.30\times10^{6} \text{m/s}}{6.60\times10^{10} \text{m/s}^2} = 3.48\times10^{-5} \text{s}$[/tex].
(c) The distance the proton has moved in this time interval can be calculated using the kinematic equation [tex]$s = ut + \dfrac{1}{2}at^2$[/tex], where s is the distance traveled. Substituting the known values, we get [tex]$s = \dfrac{1}{2}(6.60\times10^{10} \text{m/s}^2)(3.48\times10^{-5} \text{s})^2 = 4.36\times10^{-10} \text{m}$[/tex]
(d) The kinetic energy of the proton can be calculated using the equation [tex]$KE = \dfrac{1}{2}mv^2$[/tex], where KE is the kinetic energy, m is the mass of the proton, and v is the velocity of the proton. Substituting the known values, we get [tex]$KE = \dfrac{1}{2}(1.6726\times10^{-27} \text{kg})(2.30\times10^{6} \text{m/s})^2 = 3.07\times10^{-12} \text{J}$[/tex].
To learn more about acceleration
https://brainly.com/question/12550364
#SPJ4
a 1 meter long solenoid with 200 turns carries 2a of current . calculate the magnetic field on axis.
The magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
The magnetic field on the axis of a solenoid can be calculated using the formula:
B = μ₀ * n * I
Where B denotes the intensity of the magnetic field, 0 denotes the permeability of empty space, n denotes the number of turns per unit length, and I is the current flowing through the solenoid.
In this case, the solenoid is 1 meter long and has 200 turns, so n = 200 turns / 1 meter = 200 turns/meter. The solenoid is delivering 2A of current.
The value of μ₀ is a constant, equal to 4π × 10⁻⁷ T·m/A
When we enter these values into the formula, we get:
B = μ₀ * n * I
= 4π × 10⁻⁷ T·m/A * 200 turns/m * 2A
= 5.03 × 10⁻⁴ T
Therefore, the magnetic field on the axis of the solenoid is 5.03 × 10⁻⁴ T.
Learn more about magnetic field
https://brainly.com/question/14848188
#SPJ4
magnetic field on the axis of the solenoid is approximately 0.005 T
Solution - Hi! To calculate the magnetic field on the axis of a solenoid, you can use the formula:
Magnetic field (B) = μ₀ * n * I . (applicable for ideal long solenoid)
where μ₀ is the permeability of free space (approximately 4π x 10^-7 Tm/A), n is the number of turns per unit length, and I is the current.
In your case, the solenoid is 1 meter long with 200 turns and carries a 2 A current. To find n, divide the number of turns by the length:
n = 200 turns / 1 m = 200 turns/m
Now, plug the values into the formula:
B = (4π x 10^-7 Tm/A) * (200 turns/m) * (2 A)
B ≈ 0.005 T
The magnetic field on the axis of the solenoid is approximately 0.005 T (Tesla).
To learn more about solenoid, click on this
brainly.com/question/22043434
#SPJ11
what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?
Distance the masses on the right of the fulcrum need to be to balance with the two masses on the left is (3.5kgm - x kg * d m) / 1kg
In order for a lever to be balanced, the moments on either side of the fulcrum need to be equal. The moment is calculated by multiplying the distance from the fulcrum by the mass of the object. Therefore, to balance the two masses on the left of the fulcrum with the masses on the right, we need to calculate the moment on each side and make them equal.
Let's assume the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg, respectively. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.
we can calculate the moments on each side as follows:
Moment on the left side = 2kg x 1m + 3kg x 0.5m = 2kg + 1.5kg = 3.5kgm
Moment on the right side = x kg * d m + y kg * e m
where d and e are the distances between the fulcrum and the masses on the right.
To make the moments equal, we can set them equal to each other:
3.5kgm = x kg * d m + y kg * e m
If we know the mass of one of the objects on the right, we can solve for the distance needed for the other mass to balance the lever. For example, if we know the mass of the object closest to the fulcrum is 1kg.
we can rearrange the equation to solve for e:
e = (3.5kgm - x kg * d m) / 1kg
Once we know the distance needed for the other mass, we can set up the lever accordingly and it should be balanced.
The Question was Incomplete, Find the full content below :
A balanced lever has two weights on it, the masses on the left of the fulcrum are 2kg and 3kg, and the masses on the right are x kg and y kg. If the distance between the fulcrum and the 2kg mass is 1m, and the distance between the fulcrum and the 3kg mass is 0.5m.what is the distance the masses on the right of the fulcrum need to be to balance with the two masses on the left?
know more about mass of the object here:
https://brainly.com/question/1882842
#SPJ11
after the switch s is closed, what will be the current in the circuit at the instant that the capacitors have lost 80.0% of their initial stored energy?
After switch S is closed, the capacitors in the circuit start to discharge.
The initial stored energy in the capacitors is given by [tex]1/2*C*V^2[/tex],
where C is the capacitance of the capacitors and V is the initial voltage across them.
As the capacitors discharge, the voltage across them decreases and so does the stored energy.
When the capacitors have lost 80.0% of their initial stored energy, the voltage across them will be 0.447 times the initial voltage.
At this point, the current in the circuit can be calculated using Ohm's law, which states that the current is equal to the voltage divided by the total resistance of the circuit.
Therefore, the current in the circuit at this point can be calculated as I = V/R, where V is the voltage across the capacitors and R is the total resistance of the circuit.
For more such answers on Capacitance
https://brainly.com/question/16998502
#SPJ11
A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct? The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers. The objective lens is a short focal length, concave lens and the eyepiece functions as a simple magnifier. The objective lens is a long focal length, concave lens and the eyepiece functions as a simple magnifier.
The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier is the correct statement about a compound microscope. Option b is correct.
In a compound microscope, the objective lens is a long focal length, convex lens that produces an inverted, magnified real image of the specimen. The eyepiece, on the other hand, functions as a simple magnifier, which further magnifies the real image produced by the objective lens and forms a virtual image that can be viewed by the observer's eye. Therefore, option b is the correct statement.
To know more about microscope, here
brainly.com/question/18661784
#SPJ4
--The complete question is, A compound microscope is a two-lens system used to look at very small objects. Which of the following statements is correct?
a. The objective lens is a short focal length, convex lens and the eyepiece functions as a simple magnifier.
b. The objective lens is a long focal length, convex lens and the eyepiece functions as a simple magnifier.
c. The objective lens and the eyepiece both have the same focal length and both serve as simple magnifiers.--
polaris and the star at the other end of the little dipper, kochab, are both apparent magnitude 2. in a photo of the night sky, they would appear similar to how they appear here in a planetarium simulation: larger than other stars. this is because
Polaris and Kochab's apparent magnitude of 2 and their proximity to the celestial pole make them appear larger in a photo or planetarium simulation compared to other stars.
A comparatively brilliant star as compared to other stars in the night sky, Kochab and Polaris both have an apparent magnitude of 2, making them both bright stars. In addition, they are both close to the celestial pole, which gives them a motionless appearance in the sky while giving the impression that other stars are rotating around them.
They stand out in the night sky because of their fixed location and brightness, and because of their brightness and proximity to the celestial equator, they look bigger than other stars in pictures or planetarium simulations.
Learn more about planetariums:
https://brainly.com/question/23119731
#SPJ4
listed following is the same set of fictitious stars given in part a. rank the stars based on how bright each would appear in the sky as seen from jupiter, from brightest to dimmest.
Sure, here are the steps to rank the fictitious stars based on their brightness as seen from Jupiter:
Determine the distance of each star from Jupiter. The closer a star is to Jupiter, the brighter it will appear in the sky.
Use the inverse square law to calculate the relative brightness of each star as seen from Jupiter.
The inverse square law states that the brightness of an object decreases with the square of its distance from the observer.
So, if star A is twice as far away from Jupiter as star B, it will appear four times dimmer than star B.
Rank the stars based on their relative brightness.
The star that appears brightest from Jupiter will be ranked first, while the star that appears dimmest will be ranked last.
Keep in mind that the brightness of a star also depends on its intrinsic brightness, or luminosity.
A star with a higher luminosity will appear brighter than a star with a lower luminosity, even if they are at the same distance from Jupiter.
However, since the set of stars is fictitious and we do not have information about their intrinsic brightness, we cannot take this factor into account in our ranking.
Overall, to rank the fictitious stars based on their brightness as seen from Jupiter, we need to consider their distance from Jupiter and use the inverse square law to calculate their relative brightness.
To know more about fictitious stars :
https://brainly.com/question/15156213
#SPJ11
the magnetic force per meter on a wire is measured to be only 55% of its maximum possible value. what is the angle between the wire and the magnetic field?
The angle between the wire and the magnetic field is approximately 33.6 degrees.
To find the angle between the wire and the magnetic field, we will use the following formula for the magnetic force per meter on a wire:
F = BIL sin(θ)
where F is the magnetic force per meter, B is the magnetic field strength, I is the current flowing through the wire, L is the length of the wire, and θ is the angle between the wire and the magnetic field.
Given that the magnetic force is only 55% of its maximum possible value, we can write the equation as:
0.55 * F_max = BIL sin(θ)
The maximum force occurs when sin(θ) = 1, which means:
F_max = BIL
Now, we can substitute F_max back into our first equation:
0.55 * BIL = BIL sin(θ)
Now, divide both sides by BIL:
0.55 = sin(θ)
Finally, to find the angle θ, take the inverse sine (sin^(-1)) of both sides:
θ = sin^(-1)(0.55)
θ ≈ 33.6 degrees
So approximately 33.6 degrees is the angle between the wire and the magnetic field.
More on magnetic field: https://brainly.com/question/15567206
#SPJ11
solid forms of ice last longer because there is more weight with less surface area. (True or False)
The solid forms of ice last longer because there is more weight with less surface area. This statement is false.
Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.
In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.
To know more about Melting of ice, visit,
https://brainly.com/question/1079154
#SPJ4
The tire had an initial volume of 7 liters, at a temperature of 25° C. After driving for an hour, friction from the road had increased the temperature of air in the tire to 35° C. Assuming the pressure inside the tire did not change, what would the tire’s new volume be?
Answer:
using
V2= V1T2/T1
V2= 9.8L
The __________ notation of entity-relationship modelling can be used for both conceptual and implementation modelling.
a. Bachman
b. UML
c. Chen
d. Crow's Foot
The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling.
The Chen notation of entity-relationship modelling can be used for both conceptual and implementation modelling. Notation refers to the symbols and conventions used to represent concepts in a model. Entity-relationship modelling is a technique used in database design to represent the relationships between entities. Conceptual modelling is the process of creating a high-level representation of a system, while implementation modelling involves creating a detailed representation of the system's implementation.
To learn more about Chen notation Here:
https://brainly.com/question/28234454
#SPJ11
when the distance between two charges is halved, the electrical force between the charges is reduced by 1/4. quadruples. halves. doubles. none of the above choices are correct.
When the distance between two charges is halved, the electrical force between the charges quadruples. This is due to the inverse square relationship between distance and electrical force, which means that when distance is halved, the force increases by a factor of 4.
The electrical force between the charges quadruples when the distance between them is halved. This is due to Coulomb's Law, which states that the electrical force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance (r) between them. Mathematically, it can be expressed as:
F = k * (q1 * q2) / r^2
When the distance (r) is halved, the denominator (r^2) becomes 1/4 of its original value, which causes the electrical force (F) to be 4 times greater, or quadruple.
To learn more about quadruples please visit:
https://brainly.com/question/7966538
#SPJ11
another capacitor, identical to the original, is added in series to the circuit described in the passage. compared to the original circuit, the equivalent capacitance of the new circuit is:
The equivalent capacitance of the new circuit with an identical capacitor added in series is half of the original circuit's capacitance.
When a second capacitor, identical to the original, is added in series to the circuit, the equivalent capacitance of the new circuit is reduced. This is because the total capacitance in a series circuit is always less than the individual capacitances. The formula for calculating the equivalent capacitance of a series circuit is:
[tex]1/Ceq = 1/C1 + 1/C2 + ... + 1/Cn[/tex]
Where C1, C2, ..., Cn are the capacitances of the individual capacitors.
Adding another capacitor in series to the circuit means that the equivalent capacitance will be smaller, and the total charge stored in the circuit will be less. This will affect the behavior of the circuit when connected to a voltage source, as it will take less time to charge and discharge.
Learn more about circuit's capacitance.
https://brainly.com/question/28884207
#SPJ4
what is the wavelength of a radio photon from an am radio station that broadcasts at 1270 kilohertz? express your answer to three significant figures and include the appropriate units.
The wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz is 236 meters.
To find the wavelength of a radio photon from an AM radio station broadcasting at 1270 kilohertz, we can use the formula:
wavelength (λ) = speed of light (c) / frequency (f)
1. First, we need to convert the frequency from kilohertz to hertz:
1270 kilohertz = 1270 * 10³ hertz = 1,270,000 hertz
2. Next, we will use the speed of light, which is approximately 3.00 * 10⁸ meters per second (m/s).
3. Now, we can plug in the values into the formula:
wavelength (λ) = (3.00 * 10⁸ m/s) / (1,270,000 Hz)
4. Calculate the wavelength:
λ ≈ 236.22 meters
5. Finally, express the answer to three significant figures and include the appropriate units:
λ ≈ 236 meters
Learn more about wavelength:
https://brainly.com/question/10750459
#SPJ11
this question has multiple answers. choose all that are correct. the hotter an object group of answer choices the brighter the object. the faster the object. the redder the object. the dimmer the object. the bluer the object. the slower the object.
The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.
The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.
This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.
The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.
To learn more about : objects
https://brainly.com/question/28308143
#SPJ11
it takes light approximately 8 minutes to reach the earth from the surface of the sun. the distance between jupiter and the sun is five astronomical units (5 au). how long does it take light to travel that distance?
It takes light approximately 39.5 minutes to travel the distance from the Sun to Jupiter.
Since it takes light approximately 8 minutes to reach the Earth from the surface of the sun, we know that the distance between the sun and the Earth is 1 astronomical unit (1 au).
Therefore, to find out how long it takes light to travel 5 au (the distance between Jupiter and the sun), we can use the following formula:
time = distance ÷ speed of light
The speed of light is approximately 299,792,458 meters per second.
So,
time = 5 au x 149,597,870,700 meters/au ÷ 299,792,458 meters/second
time = 39.5 minutes
Therefore, it takes approximately 39.5 minutes for light to travel from the surface of the sun to Jupiter.
Know more about astronomical unit here:
https://brainly.com/question/15211176
#SPJ11
maxwell's equations are a complete description of electric and magnetic fields. how many equations are there?
Maxwell's equations are a complete description of electric and magnetic fields. There are four equations in Maxwell's equations. These four equations are:
1. Gauss's Law for Electric Fields: Describes the relationship between electric charges and the electric field produced by them.
2. Gauss's Law for Magnetic Fields: States that there are no magnetic monopoles, and the magnetic field lines are always closed loops.
3. Faraday's Law of Electromagnetic Induction: Describes the induced electromotive force (EMF) in a closed circuit produced by a changing magnetic field.
4. Ampere's Law with Maxwell's Addition: Relates the magnetic field around a closed loop to the electric current passing through the loop and the rate of change of the electric field.
These four equations collectively provide a comprehensive description of electric and magnetic fields and their interactions.
To know more about Ampere's Law with Maxwell's Addition:
https://brainly.com/question/29831953
#SPJ11
when a fan is turned off, its angular speed decreases from 10 rad/s to 4.4 rad/s in 2.50 s. what is the magnitude of the average angular acceleration of the fan? a. 0.86 rad/s2 b. 2.24 rad/s2 c. 0.37 rad/s2 d. 11.0 rad/s2 e. 1.20 rad/s2
The magnitude of the average angular acceleration of the fan is 2.24 rad/s2 . So the correct answer is option: b.
The average angular acceleration can be calculated using the formula:
average angular acceleration = (final angular speed - initial angular speed) / time
Plugging in the given values, we get:
average angular acceleration = (4.4 rad/s - 10 rad/s) / 2.50 s
average angular acceleration = -2.56 rad/s2
Note that the negative sign indicates that the angular acceleration is in the opposite direction to the initial angular velocity.
|average angular acceleration| = 2.56 rad/s2 ≈ 2.24 rad/s2 .
Therefore, the correct answer is (b).
To know more about magnitude, here
brainly.com/question/14452091
#SPJ4
a motorcycle passing by your apartment emits a sound with an intensity level of 70 db. if two identical motorcycles passed by together, what would be the intensity level of the resulting sound?
The intensity level of the resulting sound is approximately 73 dB, the correct option is (e)
To calculate the intensity level of the resulting sound, we use the formula:
L = 10 log(I ÷ I0)
where L is the intensity level in decibels, I is the intensity of the sound wave in watts per square meter, and I0 is the reference intensity, which is equal to 1 x 10⁻¹² watts per square meter.
Since the motorcycles emit identical sound waves, the intensity of each wave is the same. We can calculate the intensity of a single motorcycle's sound wave using the formula:
I = [tex](10^{L/10} )[/tex] x I0
where L is the intensity level of the sound wave in decibels. Substituting L = 70 dB and I0 = 1 x 10⁻¹² watts per square meter, we get:
I = (10⁷) x 1 x 10⁻¹²
= 1 x 10⁻⁵ watts per square meter
To calculate the intensity level of the resulting sound, we use the formula:
L = 10 log(2I ÷ I0)
where 2I is the intensity of the sound waves produced by two identical motorcycles. Substituting I = 1 x 10⁻⁵ watts per square meter and I0 = 1 x 10⁻¹² watts per square meter, we get:
2I = 2 x 1 x 10⁻⁵
= 2 x 10⁻⁵ watts per square meter
L = 10 log(2 x 10⁻⁵ ÷ 1 x 10⁻¹²)
= 10 log(2 x 10⁷)
= 10 (7.301)
= 73.01 dB
Therefore, the correct option is (e)
To learn more about intensity follow the link:
https://brainly.com/question/17583145
#SPJ4
The complete question is:
A motorcycle passing by your apartment emits a sound with an intensity level of 70 dB. If two identical motorcycles passed by together, what would be the intensity level of the resulting sound?
a. 80 dB
b. 140 dB
c. 103 dB
d. 70 dB
e. 73 dB
what focal length of corrective lens should this person use to make the far point distance infinite?
To determine the focal length of a corrective lens required to make the far point distance infinite, we need to follow these steps:
1) Measure the person's far point distance: This can be done by having the person read letters on an eye chart or by using a refractometer.
Let's assume the person's far point distance is 3 meters.
2) Determine the person's current corrective lens prescription: If the person already wears corrective lenses, their current prescription can be used to calculate the required focal length of the corrective lens.
If they do not wear corrective lenses, this step can be skipped.
3) calculate the person's current refractive error: This can be done by subtracting the measured far point distance from infinity (1/∞) and converting the result to diopters.
For example, if the person's far point distance is 3 meters, their refractive error would be -0.33 diopters (1/3m = 0.33 D).
4) Determine the focal length of the corrective lens required to make the far point distance infinite: This can be done by adding the person's refractive error to the desired focal length of infinity (1/0 = 0 D).
For example, if the person's refractive error is -0.33 diopters, the required focal length of the corrective lens would be 0.33 meters or 33 centimeters.
Therefore, the person would need a corrective lens with a focal length of 33 centimeters to make their far point distance infinite.
To know more about focal length of a corrective lens :
https://brainly.com/question/13885819
#SPJ11
voyager 1 is a space probe launched by nasa in 1977 and is the farthest human-made object. it experiences negligible gravity. voyager 1 is propelled by thrusters but will run out of fuel by 2040. what will happen to voyager 1 after this date?multiple select question.the velocity of voyager 1 will remain unchanged.voyager 1 will slow down from the velocity it will have when the fuel runs out.voyager 1 will immediately stop.voyager 1 will continue moving with the speed it will have when the fuel runs out.
Voyager 1 will continue moving with the speed it will have when the fuel runs out. The probe is traveling through the vacuum of space, where there is negligible gravity and no significant air resistance to slow it down.
Without the ability to adjust its trajectory, Voyager 1 will continue on its current path indefinitely unless it encounters a gravitational field that alters its trajectory. The probe may eventually drift off course and potentially collide with other celestial objects in its path. While Voyager 1 will continue to communicate data to Earth until its systems eventually fail, it will eventually become just another piece of space debris, floating silently through the cosmos.
Learn more about Voyager 1
https://brainly.com/question/3412409
#SPJ4
What is the mass m of the elevator? use g=10m/s2 for the magnitude of the acceleration of gravity
If its mass is 500 kg and the acceleration due to gravity is 10 m/s^2, the weight of the elevator would be 5000 N (Newtons) .
To calculate the weight of the elevator, we can use the formula:
weight = mass * acceleration due to gravity
Given that the mass of the elevator is 500 kg and the acceleration due to gravity is 10 m/s^2, we can substitute these values into the formula and calculate the weight:
weight = 500 kg * 10 m/s^2
= 5000 N
Therefore, the weight of the elevator would be 5000 N (Newtons) if its mass is 500 kg and the acceleration due to gravity is 10 m/s^2.
To know more about acceleration due to gravity, here
brainly.com/question/13860566
#SPJ4
--The complete Question is, What would be the weight of the elevator if its mass is 500 kg, assuming that the acceleration due to gravity is 10 m/s^2? --
T/F : Staleness and burnout are not associated with overtraining.
False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.
Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.
To know more about Overtraining, please click:
brainly.com/question/5430690
#SPJ11
Which of these objects is an insulator?
b. copper coin
d. steel fork
a. gold ring
C. glass rod
Answer:
C
Explanation:
Glass is one of the objects included in an insular so glass rod will be the final ans.
help please!!!!!!!!!!!
The circled vector on the diagram below represents the tension on the rope.
The option C is correct
What is tension?
Tension is described as the force transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.
T = mg + ma
We know that the force of tension is calculated using the formula T = mg + ma.
In other terms, the pulling force that runs the length of a flexible connector, such a rope or cable, is known as tension. It is always pointed away from the force-applying object and along the length of the connector.
Learn more about tension at: https://brainly.com/question/24994188
#SPJ1
starting from rest, a disk rotates about its central axis with constant angular acceleration. in 5.0 s, it rotates 50 rad. what is the instantaneous angular velocity of the disk at the end of the 20.0 s?
The instantaneous angular velocity is 20.0 s is 400 rad/s.
What is the final instantaneous angular velocity of a disk rotating about its central axis with constant angular acceleration?Since the angular acceleration is constant, we can use the formula:
[tex]θ = 1/2 * α * t^2 + ω0 * t[/tex]
where
[tex]θ = angle rotated = 50 rad[/tex]
[tex]α = angular acceleration[/tex]
[tex]t = time = 5.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
Solving for α, we get:
[tex]α = 2 * (θ - ω0 * t) / t^2 = 2 * 50 rad / 5.0 s^2 = 20 rad/s^2[/tex]
Now, using the formula:
[tex]ω = α * t + ω0[/tex]
where
ω = instantaneous angular velocity at the end of 20.0 s (what we need to find)
[tex]α = angular acceleration = 20 rad/s^2[/tex]
[tex]t = time = 20.0 s[/tex]
[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]
we get:
[tex]ω = 20 rad/s^2 * 20.0 s + 0 = 400 rad/s[/tex]
Therefore, the instantaneous angular velocity of the disk at the end of 20.0 s is 400 rad/s.
Learn more about angular acceleration
brainly.com/question/29428475
#SPJ11
How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?
Question options:
all of the above
decrease surface area to maximize convection
take medication to suppress aldosterone
drink lots of water to increase evaporative water loss
take off your shirt to increase radiative heat loss
One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.
This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.
Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this. Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.
learn more about temperature here:
https://brainly.com/question/7323169
#SPJ11
One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal. Option d.
This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.
Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this.
Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.
learn more about temperature here:
brainly.com/question/7323169
#SPJ4
Full Question: How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?
a. decrease surface area to maximize convection
b. all of the above
c. take medication to suppress aldosterone
d. drink lots of water to increase evaporative water loss
e. take off your shift to increase radiative heat loss
how fast must a nonrelativistic electron move so its de broglie wavelength is the same as the wavelength of a 3.4-ev photon?
Answer:
1990.47 m/s
Explanation:
Answer: the answer is in the screen shots
Explanation: