ANSWER Quick Due in 5 minutes!!!!!!
The line plots represent data collected on the travel times to school from two groups of 15 students. A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 4,6,14, and 28. There are two dots above 10, 12, 18, and 22. There are three dots above 16. The graph is titled Bus 47 Travel Times. A horizontal line starting at 0, with tick marks every two units up to 28. The line is labeled Minutes Traveled. There is one dot above 8, 9,18, 20, and 22. There are two dots above 6, 10, 12,14, and 16. The graph is titled Bus 18 Travel Times. Compare the data and use the correct measure of variability to determine which bus is the most consistent. Explain your answer. Bus 18, with an IQR of 16 Bus 47, with an IQR of 24 Bus 18, with a range of 16 Bus 47, with a range of 24

subtract 3 from both sides to get

4x > 27

divide both sides by 4 to get

x > 27/4 or 6 3/4

The area of the figure is 51 cm², which is option C.

In mathematics, area refers to the measure of the size of a two-dimensional surface or shape. It is typically expressed in square units, such as square meters (m²) or square centimeters (cm²), and can be calculated for a variety of geometric shapes, including squares, rectangles, triangles, circles, and more complex shapes such as trapezoids or polygons.

To find the area of the figure, we need to identify the shape of the figure. From the given information, we know that the figure has a top side, a height, and a base. We are also told that the base is divided into two parts by a perpendicular, and one of the parts is labeled as 4 cm, while the other part from the perpendicular to the right vertex is 6.2 cm.

Based on this information, we can draw the figure as a trapezoid, where the top side is the shorter base, the height is the vertical distance between the two bases, and the longer base is the sum of the two parts of the base.

Using the given information, we can calculate the longer base:

longer base = 4 cm + 6.2 cm = 10.2 cm

Now we can use the formula for the area of a trapezoid to find the area of the figure:

A = (1/2)h(b₁ + b₂)

where h is the height, b₁ is the shorter base, and b₂ is the longer base.

Plugging in the given values, we get:

A = (1/2)(5 cm)(10.2 cm + 10.2 cm) = 51 cm²

Therefore, the area of the figure is 51 cm² , which is option C.

To know more about area visit:

https://brainly.com/question/25292087

#SPJ1

Complete Question:

A four-sided figure has one side labeled 10.2 cm, a height of 5 cm, and a portion of the base from the perpendicular to a vertex labeled 4 cm. The portion of the base from the perpendicular to the right vertex is labeled 6.2 cm. What is the area of the figure?

Answer: 46 ft by 92 ft

Step-by-step explanation:

The largest area is enclosed when half the fence is used parallel to the wall and the other half is used for the two ends of the fenced area perpendicular to the wall. Half the fence is 184 ft/2 = 92 ft. Half that is used for each end of the enclosure.

Answer: 104%

Step-by-step explanation: 26% times 4 years

Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.

A prism having a pentagonal base is referred to as a pentagonal prism. It has two hexagonal bases, five parallelogram faces, and seven faces. Seven faces, fifteen edges, and ten vertices make up a pentagonal prism.

The two bases of each of the seven faces—two pentagons—and the remaining five faces—parallelograms—connect the bases of the pentagons.

Given data:

surface area of pentagonal prism = 2* base area + 5*rectangle area

surface area of pentagonal prism = 2* B + 5*L*w

surface area of pentagonal prism = 2* 84.3 + 5*7*4

surface area of pentagonal prism = 168.6 + 140

surface area of pentagonal prism = 308.6 sq. ft

Thus, the total surface area of pentagonal prism is found to be 308.6 sq. ft.

Know more about the pentagonal prism:

https://brainly.com/question/15637173

#SPJ1

The amount in the bank after 7 years increases as the compounding frequency increases, and it is highest when interest is compounded continuously.

Using the formula A = P(1 + r/n)^(nt), where:

A = the amount in the account after t years

P = the principal (initial amount)

r = the annual interest rate (as a decimal)

n = the number of times the interest is compounded per year

t = the number of years

a) If interest is compounded annually:

A = 2000(1 + 0.05/1)^(1*7) = $2,835.08

b) If interest is compounded quarterly:

A = 2000(1 + 0.05/4)^(4*7) = $2,888.95

c) If interest is compounded monthly:

A = 2000(1 + 0.05/12)^(12*7) = $2,905.03

d) If interest is compounded continuously:

A = Pe^(rt) = 2000e^(0.05*7) = $2,938.36

Therefore, the amount in the bank after 7 years increases as the compounding frequency increases, and it is highest when interest is compounded continuously.

Learn more about simple interest below.

https://brainly.com/question/25793394

#SPJ1

yes is answer   for all option   .we can check it by rules of rounding off numbers .

what is rounding ?

Rounding is the process of approximating a number to a nearby value that is easier to work with or more appropriate for a given context. When rounding, we take a number with many decimal places or significant figures and adjust it to a simpler or more convenient value with fewer decimal places or significant figures.

In the given question,

Yes, each number is rounded correctly to the nearest hundred thousand based on the rules of rounding.

To round to the nearest hundred thousand, we look at the digit in the hundred thousand place and the digit to its right (i.e., in the ten thousand place).

If the digit in the ten thousand place is 5 or greater, we round up the digit in the hundred thousand place by adding 1.

If the digit in the ten thousand place is less than 5, we leave the digit in the hundred thousand place as it is.

Using these rules, we can see that:

350000 rounded to the nearest hundred thousand is 400000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

555555 rounded to the nearest hundred thousand is 560000 because the digit in the ten thousand place is 5, so we round up the digit in the hundred thousand place.

137998 rounded to the nearest hundred thousand is 200000 because the digit in the ten thousand place is 7, so we round up the digit in the hundred thousand place.

792314 rounded to the nearest hundred thousand is 800000 because the digit in the ten thousand place is 3, so we leave the digit in the hundred thousand place as it is.

To know more about rounding , visit:

https://brainly.com/question/29878750

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

https://brainly.com/question/12431044

#SPJ1

The formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

A function is a mathematical rule that assigns each input from a set (domain) a unique output from another set (range), typically written as y = f(x).

The notation "0{-10≤x≤10}" typically represents the domain of a function or an inequality. It means that the function is defined only for the values of x that are between -10 and 10 (including -10 and 10).

Assuming that the function in question is a constant function equal to zero, the parent function is f(x) = 0.

To describe the transformations that happened to this function, we need more information about the specific formula. For example, if the formula is:

g(x) = 0{-10≤x≤10}

Then there are no transformations from the parent function. The function is simply a constant function that is equal to zero over the interval [-10, 10].

However, if the formula is something like:

g(x) = 2 * 0{-10≤x+3≤10}

Then we can describe the transformations as follows:

Horizontal translation: The function has been shifted horizontally to the left by 3 units. This means that the point (3, 0) on the parent function is now located at the origin (0, 0) on the transformed function.

Dilation/reflection: The function has been reflected about the y-axis and vertically scaled by a factor of 2. This means that the point (-1, 0) on the parent function is now located at (-4, 0) on the transformed function, and the point (1, 0) on the parent function is now located at (2, 0) on the transformed function.

Vertical translation: There is no vertical translation in this case, since the constant function is already centered at y = 0.

To summarize, the formula g(x) = 2 * 0{-10≤x+3≤10} represents a function that has been horizontally shifted left by 3 units, reflected about the y-axis, and vertically scaled by a factor of 2.

To know more about Function visit :

brainly.com/question/12431044

#SPJ1

Answer: We can use the two given points to find the equation of the line and then plug in 39 for the calling time to find the corresponding monthly cost.

Let x be the calling time (in minutes) and y be the monthly cost (in dollars). Then we have the following two points:

(x1, y1) = (35, 16.83)

(x2, y2) = (52, 18.87)

The slope of the line passing through these two points is:

m = (y2 - y1) / (x2 - x1) = (18.87 - 16.83) / (52 - 35) = 0.27

Using point-slope form with the first point, we get:

y - y1 = m(x - x1)

y - 16.83 = 0.27(x - 35)

Simplifying, we get:

y = 0.27x + 7.74

Therefore, the monthly cost for 39 minutes of calls is:

y = 0.27(39) + 7.74 = $18.21

Step-by-step explanation:

The exponential function of the population is P(x) = 15000 * 1.046^x

From the question, we have the following parameters that can be used in our computation:

Initial, a = 15000

Rate, r = 4.6%

The equation of the function is represented as

P(x) = a * (1 + r)^x

Substitute the known values in the above equation, so, we have the following representation

P(x) = 15000 * (1 + 4.6%)^x

Evaluate

P(x) = 15000 * 1.046^x

Hence, the function is P(x) = 15000 * 1.046^x

Read more about exponential function at

https://brainly.com/question/2456547

#SPJ1

The equation of p(x) in vertex form is;

p(x) = 9.67(x + 1.04)² - 10.25

The closest answer choice is:

p(x) = 3(x - 1)²  - 2, which is not correct.

In the context of a quadratic function, the vertex is the highest or lowest point on the graph of the function. It is the point where the parabola changes direction. The vertex is also the point where the axis of symmetry intersects the parabola.

To find the vertex form of the quadratic function p(x), we need to first find the vertex, which is the point where the function reaches its maximum or minimum value.

To find the vertex, we can use the formula:

x = -b/2a, where a is the coefficient of the x²  term, b is the coefficient of the x term, and c is the constant term.

Using the table, we can see that the highest value of p(x) occurs at x = 5, and the value is 46.

We can then use the formula to find the vertex:

x = -b/2a = -5/2a

Using the values from the table, we can set up two equations:

46 = a(5)² + b(5) + c

1 = a(0)²  + b(0) + c

Simplifying the second equation, we get:

1 = c

Substituting c = 1 into the first equation and solving for a and b, we get:

46 = 25a + 5b + 1

-20 = 5a + b

Solving for b, we get:

b = -20 - 5a

Substituting b = -20 - 5a into the first equation and solving for a, we get:

46 = 25a + 5(-20 - 5a) + 1

46 = 15a - 99

145 = 15a

a = 9.67

Substituting a = 9.67 and c = 1 into b = -20 - 5a, we get:

b = -20 - 5(9.67) = -71.35

Therefore, the equation of p(x) in vertex form is:

p(x) = 9.67(x - 5)²  + 1

Simplifying, we get:

p(x) = 9.67(x²  - 10x + 25) + 1

p(x) = 9.67x²  - 96.7x + 250.85 + 1

p(x) = 9.67x²  - 96.7x + 251.85

Rounding to the nearest hundredth, we get:

p(x) = 9.67(x - 5²  + 1 = 9.67(x + 1.04)²  - 10.25

Therefore, the answer is:

p(x) = 9.67(x + 1.04)² - 10.25

The closest answer choice is:

p(x) = 3(x - 1)²  - 2, which is not correct.

To know more about vertex visit:

https://brainly.com/question/29476657

#SPJ1

The two consecutive natural numbers whose sum of squares is 181 are 9 and 10

Let's assume that the two consecutive natural numbers are x and x+1. Then, we can write an equation based on the given information:

x² + (x+1)² = 181

Expanding the equation:

x² + x² + 2x + 1 = 181

Combining like terms:

2x² + 2x - 180 = 0

Dividing both sides by 2:

x² + x - 90 = 0

Now, we can use the quadratic formula to solve for x:

x = (-b ± √(b² - 4ac)) / 2a

where a = 1, b = 1, and c = -90

x = (-1 ± √(1 + 360)) / 2

x = (-1 ± √(361)) / 2

x = (-1 ± 19) / 2

We discard the negative value, as it does not correspond to a natural number:

x = 9

Therefore, the two consecutive natural numbers are 9 and 10, and their sum of squares is 81 + 100 = 181.

To learn more about integers click on,

https://brainly.com/question/17491372

#SPJ1

It is estimated that 0.861 percent of the population is faulty. The sample proportion's standard error is 0.022. A 98% confidence level has an upper bound of 0.910 and a lower bound of 0.812.

The comparative relationship between two or more things in terms of their size, amount, or number is referred to as a "proportion." Either a ratio or a fraction can be used to express it. The term "proportion" in statistics refers to the division of the total number of events by the frequency of each event.

The formula p = x/n, where p is the estimated proportion of defectives in the population, x is the number of defectives in the sample, and n is the sample size, can be used to determine the estimated proportion of defectives in the population.

When we substitute values, we obtain:

p = 353/410 = 0.861

As a result, the population's estimated defectiveness rate is 0.861.

The formula SE = √(p(1-p)/n), where SE is the standard error and n is the sample size, can be used to get the standard error of the sample percentage.

When we substitute values, we obtain:

SE is equal to√(0.861(1.0.861)/410) = 0.022.

As a result, the sample proportion's standard error is 0.022.

Using the following formula, the upper and lower bounds for a 98% confidence level can be determined:

Lower bound = z*SE - p

Upper bound = z*SE + p

where z is the z-score for a 98% degree of confidence.

We discover that the z-score corresponding to a 98% confidence level is roughly 2.33 using a z-table or calculator.

When we substitute values, we obtain:

Lower bound is equal to 0.861 - 2.33*0.022, or 0.812.

Upper bound is equal to 0.861 + 2.33 * 0.022 = 0.910.

Consequently, the range of a 98% confidence level is as follows:

Maximum: 0.910

Upper limit: 0.812

To know more about proportion visit:

brainly.com/question/30657439

#SPJ1

It is estimated that 0.861 percent of the population is faulty. The sample proportion's standard error is 0.022. A 98% confidence level has an upper bound of 0.910 and a lower bound of 0.812.

What is a proportion?

The comparative relationship between two or more things in terms of their size, amount, or number is referred to as a "proportion." Either a ratio or a fraction can be used to express it. The term "proportion" in statistics refers to the division of the total number of events by the frequency of each event.

The formula p = x/n, where p is the estimated proportion of defectives in the population, x is the number of defectives in the sample, and n is the sample size, can be used to determine the estimated proportion of defectives in the population.

When we substitute values, we obtain:

p = 353/410 = 0.861

As a result, the population's estimated defectiveness rate is 0.861.

The formula SE = √(p(1-p)/n), where SE is the standard error and n is the sample size, can be used to get the standard error of the sample percentage.

When we substitute values, we obtain:

SE is equal to[tex]\sqrt{\frac{0.861(1.0.861)}{410)}[/tex]= 0.022.

As a result, the sample proportion's standard error is 0.022.

Using the following formula, the upper and lower bounds for a 98% confidence level can be determined:

Lower bound = z*SE - p

Upper bound = z*SE + p

where z is the z-score for a 98% degree of confidence.

We discover that the z-score corresponding to a 98% confidence level is roughly 2.33 using a z-table or calculator.

When we substitute values, we obtain:

Lower bound is equal to 0.861 - 2.33*0.022, or 0.812.

Upper bound is equal to 0.861 + 2.33 * 0.022 = 0.910.

Consequently, the range of a 98% confidence level is as follows:

Maximum: 0.910

Upper limit: 0.812

To know more about proportion refer the below link

https://brainly.com/question/18514274

#SPJ1

Answer:

Lizzie practiced for a total of 14 minutes on Thursday and Friday combined.

On Thursday, she practiced for 5 minutes according to the table.

On Friday, she practiced for 9 minutes according to the table.

Adding these two times together, we get:

5 minutes + 9 minutes = 14 minutes

Therefore, Lizzie practiced for a total of 14 minutes on Thursday and Friday combined.

Answer:

Step-by-step explanation:

0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89,144,233,377,610,987, 1597, 2584, 4181, 6765, 10946, 17711, 28657, 46368, 75025, 121393, 196418, 317811, 514229, ... Can you figure out the next few numbers?

Step-by-step explanation:

6^2 / 6^1   x    6^12 / 6^8   =

6^(2-1)      x    6^(12-8)   =

6^1          x    6^4   =

6^(1+4)  =   6^5     or  = 7776

Answer:

[tex]m = \frac{ - 30 - ( - 80)}{20 - 0} = \frac{50}{20} = 2 \frac{1}{2} [/tex]

A. The elevator traveled upward at a rate of 2 1/2 feet per second. -30 > -80.

Answer: The most appropriate design for this experiment is the third option:

- Number each item from 0000 to 1199.

- Reading from left to right on a random number table, identify 800 unique four-digit numbers from 0000 to 1199. Assign the items with labels in the first 400 numbers to the process 1 group. Assign the items with labels in the second 400 numbers to the process 2 group. Assign the remaining items to the process 3 group.

This design ensures that the groups are equally sized and selected randomly without any biases. The use of a random number table to assign the groups helps to avoid any systematic patterns or preferences that might arise from numbering or labeling the items directly.

Step-by-step explanation:

The two middle terms, -11w and +11w, cancel each other out, leaving only the first and last terms. This is why there is no middle term with a variable in the factorization of the difference of squares pattern.

When expanding a binomial expression in the form of (a + b)ⁿ, the middle term can be found using the following formula:

Middle term coefficient = nC(k), where k = (n+1)/2 if n is odd, and k = n/2 or (n/2 + 1) if n is even. The middle term coefficient is then multiplied by the product of a raised to the power of (n-k) and b raised to the power of k.

The difference of squares pattern is a special algebraic pattern that arises when we factor a polynomial that is the difference between two perfect squares. For example,

x² - y² = (x+y)(x-y)

When we apply this pattern to the expression w - 121, we can rewrite it as:

w² - 11²

And, we can use the difference of squares pattern to factor it as:

(w + 11)(w - 11)

Notice that there is no middle term with a variable in this factorization. This is because when we multiply (w + 11)(w - 11), the middle term cancels out.

To see why this happens, let's expand the product:

(w + 11)(w - 11) = w² - 11w + 11w - 121

The two middle terms, -11w and +11w, cancel each other out, leaving only the first and last terms. This is why there is no middle term with a variable in the factorization of the difference of squares pattern.

To know more about middle term visit:

brainly.com/question/29129680

#SPJ1

Briana and her mother will need to measure and cut the fabric for the quilt. They will need to decide on a pattern and color scheme for the quilt. They will need to sew the pieces of fabric together to create the quilt top. They will need to layer the quilt top with batting and backing fabric and then quilt the layers together. Finally, they will need to bind the edges of the quilt.

Answer:

K = √-6k

i did the math and got this answer and it was right

The polynomial in factor form is y(x) = - (1 / 6) · (x + 3) · (x + 1) · (x - 2) · (x - 3).

In this problem we find a representation of polynomial set on Cartesian plane, whose expression is described by the following formula in factor form:

y(x) = a · (x - r₁) · (x - r₂) · (x - r₃) · (x - r₄)

Where:

Then, by direct inspection we get the following information:

y(0) = - 3, r₁ = - 3, r₂ = - 1, r₃ = 2, r₄ = 3

First, determine the lead coefficient:

- 3 = a · (0 + 3) · (0 + 1) · (0 - 2) · (0 - 3)

- 3 = a · 3 · 1 · (- 2) · (- 3)

- 3 = 18 · a  

a = - 1 / 6

Second, write the complete expression:

y(x) = - (1 / 6) · (x + 3) · (x + 1) · (x - 2) · (x - 3)

To learn more on polynomials: https://brainly.com/question/29260355

#SPJ1

Therefore, it will take 173 months to pay off the loan, or approximately 14 years and 5 months.

A percentage is a way of expressing a number as a fraction of 100. The symbol for a percentage is "%". For example, 50% is the same as 50/100 or 0.5 as a decimal. Percentages are often used to express a portion or share of a whole. For instance, if you scored 90% on a test, it means you got 90 out of 100 possible points. In finance, percentages are commonly used to express interest rates, returns on investments, or changes in stock prices.

First, we need to convert the monthly interest rate from a percentage to a decimal by dividing by 100.

0.25% / 100 = 0.0025

Now we can plug in the values into the formula:

N= (-log⁡ (1-0.0025*70000/250))/ (log⁡ (1+0.0025))

Simplifying the equation in the parentheses:

N= (-log⁡ (1-175))/ (log⁡ (1.0025))

N= (-log⁡ (0.9964))/ (0.002499)

N= 172.9

Rounding up to the nearest whole number since we can't make partial payments:

N= 173

To learn more about percentage, visit

https://brainly.com/question/29306119

#SPJ1

The exponential function is y=5.[tex]2^x[/tex].

What is exponential function?

A mathematical function called an exponential function is employed frequently in everyday life. It is mostly used to compute investments, model populations, determine exponential decline or exponential growth, and so forth.

Here the exponential function is [tex]y=ab^x[/tex]

Since (-3,5/8) is on the graph, -[tex]\frac{5}{8}[/tex]=[tex]ab^{-3}[/tex] -----> 1

Since (3, 40) is on the graph, 40=[tex]ab^3[/tex] ------> 2

So, [tex]\frac{ab^3}{ab^{-3}}=\frac{40}{\frac{-5}{8}}[/tex]

=> [tex]b^{3+3}=8\times8[/tex]

=> [tex]b^6=2^6[/tex]

=> b = 2

put b=2 into 2 then,

=> 40= [tex]a\times2^3[/tex]

=> 8a=40

=> a =5

Then the exponential function is y=5.[tex]2^x[/tex].

To learn more about exponential function refer the below link

https://brainly.com/question/2456547

#SPJ1

Thus, the correct equation for the given parabolic graph is found as: f(b) = (b – 8)² + 4.

A parabola has a lowest point if it opens upward. A parabola has a highest point if it opens downward.

The vertex of the parabola is located at this lowest or highest point.

Vertex form of a quadratic function:

f(x) = a(x – h)² + k, where a, h, and k are constants.

The vertex of the parabola is at because it is translated h horizontal units and k vertical units from the origin (h, k).

(h,k) are the vertex of parabola.

From the given graph:

f(b) is the given function:

Vertex (h,k) = (8, 4)

Thus, h= 8 and k = a = 1, x = b.

Put the values in quadratic function:

f(b) = 1(b – 8)² + 4

f(b) = (b – 8)² + 4

Thus, the correct equation for the given parabolic graph is found as: f(b) = (b – 8)² + 4.

Know more about the quadratic function in vertex form:

https://brainly.com/question/28201865

#SPJ1

The given information and the transitive property of inequalities, we can prove that [tex]AC[/tex] is greater than [tex]EF[/tex] .

Statement Reason

[tex]BC = EF[/tex] Given

Betweenness Given

[tex]AC > BC[/tex] Given

[tex]AC > EF[/tex] Transitive property [tex](3, 1)[/tex]

Explanation:

[tex]BC = EF[/tex] Given: Given statement that BC is equal to EF.

Betweenness Given: Given statement that states the concept of betweenness, where BC is between AC and EF.

AC > BC Given: Given statement that  [tex]AC[/tex] is greater than BC.

[tex]AC > EF[/tex] Transitive property: Using the transitive property, we can conclude that  [tex]AC[/tex] is greater than EF (based on statement 3 and 1).

Therefore, using the given information and the transitive property of inequalities, we can prove that AC is greater than [tex]EF[/tex]  .

Learn more about transitive here:

https://brainly.com/question/2437149

#SPJ1

Answer:

s/3

Step-by-step explanation:

since she drew s drawings and split them among 3 penpals, it would be s/3, for example, 6 drawings/ 3 would be 2 drawings for each person.

If each person drove at a constant rate,than Laura drove the fastest

Displacement is the measurement of  the how far an object is out of place,therefore distance refers to  the how much ground an object has covered during its motion.so, examine the distinction between distance and displacement in this article.

The means of Speed is :he speed at which an object of location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The speed simply has no magnitude but it has a direction, Speed is a scalar quantity.

to compute who drove the quickest by Using this   formula

speed=Distance /time,

first of all the convert times into hours:

Hank: 3.2 hours x 3 hours and 12 minutes.

Laura: 2.5 hours is 2 hours and 30 minutes.

Nathan: 2.25 hours is 2 hours and 15 minutes.

Raquel: 4 hours plus 24 minutes equals 4.4 hours.

now to calculate the speed by above formula

Hank: 55 miles per hour for 176 miles in 3.2 hours.

Laura: 60 miles per hour equals 150 miles in 2.5 hours.

Nathan: 50 miles per houris equal to 112.5 miles in 2.25 hours.

Raquel: 65 miles for 286 miles in 4.4 hours.

As a result, Laura moved the fastest, clocking in at 60 miles. The solution, Laura, is B.

Learn more about speed here:

https://brainly.com/question/31273613

#SPJ1

Answer:

14cm

Step-by-step explanation:

112÷8=14

base length=14cm

Answer:

To find the base length of a rectangle, given its area and height, you can use the formula for calculating the area of a rectangle, which is:

Area = Length x Width

In this case, you are given that the area is 112 square inches and the height is 8 inches. Let's denote the base length as "x" inches.

So, the equation for the area of the rectangle becomes:

112 = x * 8

To solve for "x", you can divide both sides of the equation by 8:

112 / 8 = x

x = 14

Therefore, the base length of the rectangle is 14 inches.