Answer the question below

The amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is calculated to be approximately 6.58 gallons.

What is unit rate?

A unit rate is the cost for only one of anything. This is expressed as a ratio with a denominator of 1. For instance, if you covered 70 yards in 10 seconds, you did so at an average speed of 7 yards per second. Although both of the ratios—70 yards in 10 seconds and 7 yards in one second—are rates, only the latter is a unit rate.

Assuming the unit rate of 1 gallon per 18.25 minutes, we can convert 2 hours to minutes by multiplying it by 60, which gives us 120 minutes.

So, in 120 minutes, the amount of liquid that can be processed at a unit rate of 1 gallon per 18.25 minutes would be:

(120 minutes) / (18.25 minutes/gallon) = 6.58 gallons

Therefore, the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is found out to be  approximately 6.58 gallons.

To learn more about the unit rate from the given link

https://brainly.com/question/4895463

#SPJ9

The complete question is :

What is the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes?

Answer:

260

Step-by-step explanation:

First you find the area of the triangle

1/2×base×height

1/2×20×10

=100

Then you find the area of the rectangle

A=l×b

=20×8

=160

Then you add the area of the triangle with the area of the rectangle

160+100=260

The principle of mathematical induction is a method of proof used in mathematics to prove that a statement is true for all natural numbers.

It is based on the idea that if the statement is true for one number, then it can be used to prove that it is true for the next number. Mathematical induction can be expressed mathematically as follows:

Let P(n) be a statement involving an integer n

Base Case: P(m) is true for some m

Induction Hypothesis: Assume P(k) is true for some k>m.

Induction Step: Show that P(k+1) is true.

Therefore, P(n) is true for all n>m

Learn more about Mathematical induction here:

https://brainly.com/question/30893280

#SPJ1

We will use sine function, and length of the opposite side is [tex]\frac{25\sqrt{3}}{2}$[/tex] feet.

To solve for the opposite side of the right triangle, we would use the sine function. In a right triangle, the sine of an angle is defined as the ratio of the length of the opposite side to the length of the hypotenuse.

In this problem, we are given that one angle of the right triangle is 60 degrees and the hypotenuse is 25 feet. Let's label the opposite side as x and the adjacent side as y. Then we can use the sine function:

[tex]$\sin 60^\circ = \frac{x}{25}$[/tex]

Simplifying the left side, we have:

[tex]$\frac{\sqrt{3}}{2} = \frac{x}{25}$[/tex]

Multiplying both sides by 25, we get:

[tex]$x = \frac{25\sqrt{3}}{2}$[/tex]

Therefore, the length of the opposite side is [tex]\frac{25\sqrt{3}}{2}$[/tex] feet.

To know more about Function visit:

brainly.com/question/28193995

#SPJ1

By using chi-squared test, we can conclude that there is evidence of an association between breed and milk yield at the 5% significance level.

What is chi-squared test?

To perform a chi-squared test for independence between breed and milk yield, we need to set up the hypotheses:

Null hypothesis: There is no association between breed and milk yield.

Alternative hypothesis: There is an association between breed and milk yield.

We will use a significance level of 0.05.

To calculate the expected counts for each cell, we will use the formula: (row total x column total) / grand total.

The observed counts and expected counts are:

The grand total is 100.

The degrees of freedom for the test are (number of rows - 1) x (number of columns - 1) = (2 - 1) x (3 - 1) = 2.

Using a chi-squared distribution table or calculator, we find the critical value for a chi-squared test with 2 degrees of freedom and a 0.05 significance level to be 5.99.

To calculate the test statistic, we use the formula:

chi-squared = [tex]sum((observed\ count - expected\ count)^2 / expected\ count)[/tex]

The calculated value of chi-squared is:

[tex]chi-squared = ((32-25.76)^2 / 25.76) + ((20-19.04)^2 / 19.04) + ((16-13.20)^2 / 13.20) + ((10-16.24)^2 / 16.24) + ((18-18.96)^2 / 18.96) + ((4-4.80)^2 / 4.80) = 10.92[/tex]

The degrees of freedom for the test are 2, and the critical value is 5.99.

Since the calculated value of chi-squared (10.92) is greater than the critical value (5.99), we reject the null hypothesis.

Therefore, we can conclude that there is evidence of an association between breed and milk yield at the 5% significance level.

To learn more about chi-squared test visit:

https://brainly.com/question/4543358

#SPJ1

Problems:

Solve for x: 2x - 5 > 9x + 2

Solve for x: 3x + 2 < 7x - 5

Solve for x: 4x + 3 < 2x - 1

Solve for x: -2x - 4 > -8x + 3

Solve for x: 5x + 1 < 2x + 7

Answers:

x < -0.7

x > 1.75

x < -1

x < 0.875

x < 1.2

Answer:  

Example 1

Solve 3x − 5 ≤ 3 − x.

Solution

We start by adding both sides of the inequality by 5

3x – 5 + 5 ≤ 3 + 5 − x

3x ≤ 8 – x

Then add both sides by x.

3x + x ≤ 8 – x + x

4x ≤ 8

Finally, divide both sides of the inequality by 4 to get;

x ≤ 2

Example 2

Calculate the range of values of y, which satisfies the inequality: y − 4 < 2y + 5.

Solution

Add both sides of the inequality by 4.

y – 4 + 4 < 2y + 5 + 4

y < 2y + 9

Subtract both sides by 2y.

y – 2y < 2y – 2y + 9

Y < 9 Multiply both sides of the inequality by −1 and change the inequality symbol’s direction. y > − 9

Solving linear inequalities with subtraction

Let’s see a few examples below to understand this concept.

Example 3

Solve x + 8 > 5.

Solution

Isolate the variable x by subtracting 8 from both sides of the inequality.

x + 8 – 8 > 5 – 8 => x > −3

Therefore, x > −3.

Example 4

Solve 5x + 10 > 3x + 24.

Solution

Subtract 10 from both sides of the inequality.

5x + 10 – 10 > 3x + 24 – 10

5x > 3x + 14.

Now we subtract both sides of the inequality by 3x.

5x – 3x > 3x – 3x + 14

2x > 14

x > 7

Solving linear inequalities with multiplication

Let’s see a few examples below to understand this concept.

Example 5

Solve x/4 > 5

Solution:

Multiply both sides of an inequality by the denominator of the fraction

4(x/4) > 5 x 4

x > 20

Step-by-step explanation:

Hope this helps :3

Answer:

3x + 4 < 13

2y - 5 > 7

6n - 1 ≤ 23

8m + 2 ≥ 18

4a - 7 < 5a + 2

9b + 3 > 6b + 10

Step-by-step explanation:

I dunno if this is what you're asking for

Answer:

ok.....

x + 2 < 5

|x - 4| > 4

x + 7 [tex]\geq[/tex] 8

-x < -5

x - 5 < 9

5x + 18 > 2

|3x - 1| < 8

The amount of time needed for this capital to triple would be 50 months, the letter "d" being correct. We arrive at this result using simple interest.

Simple interest is a type of financial calculation that is used to calculate the amount of interest on borrowed or invested capital for a given period of time.

In order to find the amount of time required for the principal to be equal to three times the redemption, we have to note that the amount will be equal to three times the principal, using this information in the formula. Calculating, we have:

M = C * (1 + i * t)

3C = C * (1 + 0.04t)

3 = 1 + 0.04t

0.04t = 3 - 1

0.04t = 2

t = 2/0.04

t = 50

The graph is increasing from 0 minutes to 40 minutes, decreasing from 40 minutes to 80 minutes, and constant from 80 minutes to 200 minutes.

The rate of global warming is increasing. Every year, average global temperatures continue to rise, leading to more extreme weather events and disruptions to the environment. This has been caused by human activities, such as burning fossil fuels, which release carbon dioxide and other greenhouse gases into the atmosphere. These gases trap heat, leading to a rise in temperatures.

The domain of the relation is the set of all time values, ranging from 0 minutes to 200 minutes. The range of the relation is the set of all depth values, ranging from 0 feet to 8 feet.

The graph represents a function because for every value of time, there is exactly one corresponding value of depth.

The graph shows the depth of water in a horse trough over a certain amount of time. The graph starts at 0 feet and increases to a maximum of 8 feet over the first 40 minutes. After 40 minutes, the depth of the water starts to decrease until it reaches a minimum of 2 feet at 80 minutes. After 80 minutes, the depth of the water remains constant at 2 feet until the end of the graph at 200 minutes.

To learn more about increasing

https://brainly.com/question/29258297

#SPJ1

The radius of the circle with given circumference is 13.

What is circumference?

In mathematics, the circumference of any shape determines the path or boundary that surrounds it. In other words, the perimeter, also referred to as the circumference, helps determine how lengthy the outline of a shape is.

We are given that the circumference of a circle is 81.64 miles.

We know that circumference of a circle is given by 2πr.

So, using this we get

⇒ C  = 2πr

⇒ 81.64  = 2 * 3.14 * r

⇒ 81.64  = 6.28 * r

⇒ r  = 13

Hence, the radius of the circle with given circumference is 13.

Learn more about circumference from the given link

https://brainly.com/question/18571680

#SPJ1

Answer:

B.......................

The slope for the given point through which it passes through the graph is [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex] = infinity .

What about slope?

The slope of a line is a measure of its steepness. It is defined as the ratio of the vertical change (rise) between two points on the line to the horizontal change (run) between the same two points. In other words, it is the rate at which the line rises or falls as we move along it in the horizontal direction.

Define graph:

In mathematics, a graph is a visual representation of a set of data or mathematical relationships between variables. Graphs can be used to display and analyze data in a variety of formats, including line graphs, bar graphs, scatter plots, and pie charts.

According to the given information:

As, we know that the slope =  [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex]

⇒ In which the point given are (-1,8) and (-1,-4)

By putting the value of the given point we have that

⇒ [tex]\frac{-4-(8)}{-1-(-1)}[/tex] = infinity.

To know more about slope visit:

https://brainly.com/question/3605446

#SPJ1

The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

What is a piecewise function ?

A piecewise function is a function that is defined by different equations on different parts of its domain. The graph of a piecewise function consists of several distinct parts, each corresponding to a different equation.

The graph shown is an example of a piecewise function. The function is defined using different equations on different intervals of the domain.

On the interval from negative infinity to negative 2, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

On the interval from negative 2 to 2, the function is defined by the equation y = -x. This means that the value of the function is equal to the negative of x on this interval.

On the interval from 2 to positive infinity, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

At the point x = -2, the function experiences a discontinuity, because the two equations that define it have different values at this point. The function is not differentiable at this point, because it does not have a well-defined tangent line.

The domain of the function is the set of all real numbers, because there are no restrictions on the values of x that are allowed.

Therefore, The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

To learn more about Piecewise function from given link.

https://brainly.com/question/24031122

#SPJ1

Answer:

you need to learn yo stuff

Step-by-step explanation:

bye

let's bear in mind that on the III Quadrant, sine and cosine are both negative, whilst on the IV Quadrant, sine is negative and cosine is positive, that said

[tex]\cos(\alpha )=\cfrac{\stackrel{adjacent}{3}}{\underset{hypotenuse}{5}}\hspace{5em}\textit{let's find the \underline{opposite side}} \\\\\\ \begin{array}{llll} \textit{using the pythagorean theorem} \\\\ a^2+o^2=c^2\implies o=\sqrt{c^2 - a^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{5}\\ a=\stackrel{adjacent}{3}\\ o=opposite \end{cases} \\\\\\ o=\pm \sqrt{ 5^2 - 3^2} \implies o=\pm \sqrt{ 16 }\implies o=\pm 4\implies \stackrel{IV~Quadrant }{o=-4} \\\\[-0.35em] ~\dotfill[/tex]

[tex]\tan(\beta )=\cfrac{\stackrel{opposite}{4}}{\underset{adjacent}{3}}\implies \tan(\beta )=\cfrac{\stackrel{opposite}{-4}}{\underset{adjacent}{-3}} \\\\[-0.35em] ~\dotfill\\\\ \tan(\alpha + \beta) = \cfrac{\tan(\alpha)+ \tan(\beta)}{1- \tan(\alpha)\tan(\beta)} \\\\\\ \tan(\alpha + \beta)\implies \cfrac{ ~~\frac{-4}{3}~~ + ~~\frac{-4}{-3} ~~ }{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \cfrac{0}{1-\left( \frac{-4}{3} \right)\left( \frac{-4}{-3} \right)}\implies \text{\LARGE 0}[/tex]

Answer:

  -15

Step-by-step explanation:

You want the average rate of change of g(x) = 3x² +3 on the interval [-9, 4].

The average rate of change is defined as ...

  AROC(g) = (g(b) -g(a))/(b -a)

We can evaluate this directly, or we can simplify it a bit first.

 AROC = ((3b² +3) -(3a² +3))/(b -a)

  = (3b² -3a²)/(b -a)

  = 3(b -a)(b +a)/(b -a)

  = 3(b +a)

The AROC on the interval [a, b] = [-9, 4] is then ...

  AROC = 3(4 +(-9)) = 3(-5)

  AROC = -15

__

Additional comment

In the attachment, a graphing calculator is used to evaluate the rate of change directly from the definition. It gives the same value, as expected.

Answer:

Step-by-step explanation:

Ici, nous allons réduire la fraction 18/25 aux termes les plus bas et la convertir en un nombre fractionnaire, si nécessaire.

Dans la fraction 18/25, 18 est le numérateur et 25 est le dénominateur.

On commence par trouver le plus grand diviseur commun de 18 et 25, qui est 1. Ensuite, on divise 18 et 25 par le plus grand diviseur commun pour obtenir la plus petite expression, écrite comme suit :

(18 ÷ 1) / (25 ÷ 1)

= 18/25

Answer:

Step-by-step explanation:

To find the LCM of the given expressions, we need to factor each expression completely and then find the product of the highest powers of all the factors.

ax² - (a² + ab)x + a²b can be factored as:

ax² - (a² + ab)x + a²b = a(x - b)(x - a)

bx² - (b² + bc)x + b²c can be factored as:

bx² - (b² + bc)x + b²c = b(x - c)(x - b)

cx² - (c² + ac)x + c²a can be factored as:

cx² - (c² + ac)x + c²a = c(x - a)(x - c)

Now, the LCM is the product of the highest powers of all the factors.

The highest power of a is a², the highest power of b is b², and the highest power of c is c². So, the LCM is:

LCM = a²b²c²(x - a)(x - b)(x - c)

Therefore, the LCM of ax² - (a² + ab)x + a²b, bx² - (b² + bc)x + b²c and cx² - (c² + ac)x + c²a is a²b²c²(x - a)(x - b)(x - c).

Answer: top two goes together, middle left goes to bottom right, bottom left goes to middle right

Step-by-step explanation:

Substitute x for an easy number like 2 and solve.

x - 2/3 - 1/2x = 1/2x - 2/3

x - 1/2 - 3/4x = 1/4x- 1/2

1/3x - 3/4 - 2/3x = -1/3x - 3/4

Answer:

To solve the linear programming problem, we need to first graph the feasible region determined by the constraints, and then evaluate the objective function at each corner point of the feasible region to find the maximum value of z.

Plotting the lines corresponding to the inequalities, we get:

Graph of the feasible region:

The feasible region is the shaded polygon in the graph. We can see that the vertices of the feasible region are (2, 9), (2, 12), (4, 7), and (8, 2).

Next, we evaluate the objective function at each of these vertices to find the maximum value of z.

At (2, 9): z = 7x + 2y = 7(2) + 2(9) = 23

At (2, 12): z = 7x + 2y = 7(2) + 2(12) = 31

At (4, 7): z = 7x + 2y = 7(4) + 2(7) = 35

At (8, 2): z = 7x + 2y = 7(8) + 2(2) = 58

Therefore, the maximum value of z is 58, which occurs at the point (8, 2).

Hence, the answer is: the maximum value of z is 58.

Answer:

Unfortunately, I cannot see the graph you are referring to since we are communicating through text. However, based on the information given, we can make some general observations.

We know that Natasha received a raise in her hourly rate of pay at some point during the year. Before the raise, she earned some initial hourly rate of pay. Let's call this initial rate of pay "x". Let's also assume that she worked for "h" hours before receiving the raise, and "k" hours after receiving the raise.

We can write an equation to represent the total amount of money she made this year:

Total amount of money = (initial hourly rate of pay x number of hours worked at the initial rate) + (new hourly rate of pay x number of hours worked at the new rate)

Using the variables we defined earlier, we can write:

Total amount of money = (x × h) + ((x + y) × k)

where y is the increase in her hourly rate of pay after the raise.

We also know that she earned a certain amount of money before the raise. Let's call this amount "M". This means that:

M = x × h

Solving for x, we get:

x = M/h

Substituting this expression for x into the first equation, we get:

Total amount of money = (M + yh) + ((M/h + y) × k)

We don't know the values of M, y, h, or k, so we cannot determine the initial hourly rate of pay x or the total amount of money Natasha made this year. However, we have set up an equation that can be used to solve for these values if we have more information.

Answer:

12,500 is 100%, or 1 in decimal terms. We calculate 5% by multiplying 12500 by 0.05.

This gives us a total of £625

Step-by-step explanation:

Brainliest pls

There are 1,350 desks in 45 classrooms that each have 6 rows of 5 desks.

An expression contains one or more terms with addition, subtraction, multiplication, and division.

We always combine the like terms in an expression when we simplify.

We also keep all the like terms on one side of the expression if we are dealing with two sides of an expression.

Example:

1 + 3x + 4y = 7 is an expression.com

3 + 4 is an expression.

2 x 4 + 6 x 7 – 9 is an expression.

33 + 77 – 88 is an expression.

We have,

Each classroom has 6 rows of 5 desks.

So the total number of desks in one classroom.

= 6 rows x 5 desks per row

= 30 desks

To find the total number of desks in 45 classrooms, we can multiply the number of desks in one classroom by the number of classrooms.

= 30 desks per classroom x 45 classrooms

= 1,350 desks

Therefore,

There are 1,350 desks in 45 classrooms that each have 6 rows of 5 desks.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ2

Answer:

20.8

Step-by-step explanation:

Let h be the height of the ladder. We know that the distance BC is 8 ft, and the angle of elevation BAC is 69 degrees. Therefore, we have:

tan(69) = h/8

Multiplying both sides by 8, we get:

8*tan(69) = h

Using a calculator, we get:

h ≈ 20.8 ft

Therefore, the height of the top of the ladder from the ground is approximately 20.8 feet.

The total distance that the water tanker has covered in March of 2022 is given as follows:

1860 kilometers.

Velocity is given by the change in the distance divided by the change in the time, hence the following equation is built to model the relationship between these three variables:

v = d/t.

The parameters for this problem are given as follows:

Hence the total distance is then obtained as follows:

d = v x t

d = 60 x 31

d = 1860 kilometers.

The complete question is:

"Assuming that the water tanker travels an average of 60 kilometers a day, calculate the total distance that the water tanker has covered in March 2022​".

More can be learned about the relation between velocity, distance and time at https://brainly.com/question/24316569

#SPJ1

Answer:

26° 180 -81 - 73 = 26

Step-by-step explanation:

Answer:

26

Step-by-step explanation:

triangle= 180

81 + 73 = 154

180 - 154= 26

The type of transformation represented in the figure is the translation transformation i.e. (c) none of these

Given the triangles ABC and A'B'C'

The transformation between the triangles is translation

The translation transformation is a type of transformation that moves an object without changing its size, shape, or orientation.

This transformation involves sliding an object in a particular direction by a certain distance, either horizontally or vertically.

In this case, the direction is horizontally and vertically

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

Answer:1 and 2

Step-by-step explanation:

so, they asked 50 students and then that was later broke down to smaller groups.

10,15,25

so, for every 10 students will be one. 1 vote= 10 students.

also, the dinosaur had the greatest number of votes so that explains answer 2.

Answer:

Step-by-step explanation:

modal weight:  the weight that appear most often

4.5 kg  appears 3 times

6-sided polygon:  even though it is an irregular polygon, the interior angles still add up to (6 - 2)180 = 720

therefore, angle f = 720 - 576 = 144      (the sum of a+b+c+d+e is very blurry in the image, it looks like 576--please double check that!)

modal score:  read this right off the graph.  The score with the highest frequency is the modal score:  14   (meaning, 9 contestants got this score)